static void Main(string[] args)
{
// construct the quantum simulator
using (var sim = new QuantumSimulator())
{
// Try initial values
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
// we pass the simulator, initial count of 1000, and an initial qubit value
// Note that the run method is asynchronous.
// Each Q# operation has a corresponding C# class, for which a Run method belongs to the class
// the Run method performs asynchronous executions of the given operations
// note that our results for BellTest are strored in a tuple
var results1 = XGate.Run(sim, 1000, initial).Result;
// here we perform a Hadamard gate operation, for which our qubit is placed from the ground or exited state into
// a superposition state of either |0> or |1>
var results2 = HGate.Run(sim, 1000, initial).Result;
// Places two bits a Bell State, which is in essence a superposition of two qubits that are entangled
var res = BellTest.Run(sim, 1000, initial).Result;
// caste results into a tuple, for easy access
var(numZeros, numOnes, agree) = res;
var play = Playground.Run(sim, 1000, initial).Result;
var(nOnes, nZeros, agreement) = play;
// System.Console.WriteLine($"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree, -4}");
System.Console.WriteLine($"Init:{initial,-4} 0s={nZeros,-4} 1s={nOnes,-4} agree={agreement,-4}");
}
}
System.Console.WriteLine("Press any key to continue...");
System.Console.ReadKey();
}
static void Main(string[] args)
{
// Estimate quantum resources.
Console.WriteLine("Resource estimation");
Console.WriteLine("-------------------");
var estimator = new ResourcesEstimator();
BellTest.Run(estimator, 1000, Result.Zero).Wait();
Console.WriteLine(estimator.ToTSV());
// Actually run the experiment (assuming the resources are enough).
Console.WriteLine();
Console.WriteLine("Experiment");
Console.WriteLine("----------");
using (var qsim = new QuantumSimulator())
{
// Try initial values
var initials = new Result[] { Result.Zero, Result.One };
foreach (var initial in initials)
{
var res = BellTest.Run(qsim, 1000, initial).Result;
var(numZeros, numOnes, agree) = res;
Console.WriteLine(
$"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree,-4}");
}
}
Console.WriteLine();
Console.WriteLine("Press any key to continue...");
Console.ReadKey();
}
static void Main(string[] args)
{
//Construct a quantum simulator sim -- scope inside using statement only
using (var sim = new QuantumSimulator())
{
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
//Run method is used to call Quantum operation from C#-- it is asynchronously execution -- it means when fetch the Result property of Q# operation BellTest to variable res, this blocks execution until the task complets and return result synchronously
var res = BellTest.Run(sim, 1000, initial).Result;
var(numZeros, numOnes) = res;
System.Console.WriteLine($"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4}");
}
}
using (var sim = new QuantumSimulator())
{
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
//Run method is used to call Quantum operation from C#-- it is asynchronously execution -- it means when fetch the Result property of Q# operation BellTest2 to variable res, this blocks execution until the task complets and return result synchronously
var res = BellTest_2.Run(sim, 1000, initial).Result;
var(numZeros, numOnes, agree) = res;
System.Console.WriteLine($"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree,-4}");
}
}
System.Console.WriteLine("Press any key to continue...");
System.Console.ReadKey();
}
static void Main(string[] args)
{
using (var qsim = new QuantumSimulator())
{
// Try initial values
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
var res = BellTest.Run(qsim, 1000, initial).Result;
/**
* Using estimator estimate of how many resources (qubits or certain gates) the program will use on a quantum computer
*/
// var estimator = new ResourcesEstimator();
// var res = BellTest.Run(estimator, 1000, initial).Result;
// System.Console.WriteLine(estimator.ToTSV());
var(numZeros, numOnes, agree) = res;
System.Console.WriteLine(
$"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree,-4}");
}
}
System.Console.WriteLine("Press any key to continue...");
Console.ReadKey();
}
static void Main(string[] args)
{
// The C# driver has four parts:+
// Construct a quantum simulator. In the example, sim is the simulator.
// Compute any arguments required for the quantum algorithm.In the example, count is fixed at a 1000 and initial is the initial value of the qubit.
// Run the quantum algorithm. Each Q# operation generates a C# class with the same name. This class has a Run method that asynchronously executes the operation.
// The execution is asynchronous because execution on actual hardware will be asynchronous.
// Because the Run method is asynchronous, we fetch the Result property; this blocks execution until the task completes and returns the result synchronously.
// Process the result of the operation. In the example, res receives the result of the operation.
// Here the result is a tuple of the number of zeros(numZeros) and number of ones(numOnes) measured by the simulator.
// This is returned as a ValueTuple in C#. We deconstruct the tuple to get the two fields, print the results, and then wait for a keypress.
using (var sim = new QuantumSimulator())
{
// Try initial values
Result[] initals = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initals)
{
var res = BellTest.Run(sim, 1000, initial).Result;
var(numZeros, numOnes, agree) = res;
Console.WriteLine($"Init: {initial, -4} 0s={numZeros, -4} 1s={numOnes, -4} agree={agree, -4}");
}
}
Console.WriteLine("Press any key to continue...");
Console.ReadKey();
}
// Bell Test
private static void Bell()
{
System.Console.WriteLine("Press any key to measure some Bell states");
System.Console.ReadKey();
var n = 1000;
using (var sim = new QuantumSimulator())
{
System.Console.WriteLine($" ========== Bell State & Teleportation ==========");
System.Console.WriteLine($"The following uses a Hadamard gate (no entanglement), " +
$"to get a superposition of states that, when measured, agree ~50% of the time");
// Try initial values
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
var res = BellTest.Run(sim, n, initial, false).Result;
var(numZeros, numOnes, agree) = res;
System.Console.WriteLine(
$"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree * 100 / n}%");
}
System.Console.WriteLine($"Now we add a CNOT Gate to get entanglement, and get agreement 100% of the time");
System.Console.WriteLine("Press any key...");
System.Console.ReadKey();
foreach (Result initial in initials)
{
var res = BellTest.Run(sim, n, initial, true).Result;
var(numZeros, numOnes, agree) = res;
System.Console.WriteLine(
$"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree * 100/n}%");
}
}
System.Console.ReadKey();
System.Console.WriteLine();
}
static void Main(string[] args)
{
var estimator = new ResourcesEstimator();
BellTest.Run(estimator, 1000, Result.Zero).Wait();
System.Console.WriteLine(estimator.ToTSV());
System.Console.WriteLine("Press any key to continue...");
Console.ReadKey();
}
private static void RunBellTest(SimulatorBase simulator)
{
// Try initial values
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
var res = BellTest.Run(simulator, 1000, initial).Result;
var(numZeros, numOnes, agree) = res;
Console.WriteLine($"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree,-4}");
}
}
static void Main(string[] args)
{
Task <(long, long)> task = null;
using (var qsim = new QuantumSimulator())
{
task = BellTest.Run(qsim, 100, Result.One);
task.Wait();
}
Console.WriteLine("Num of zeroes : {0}, num of ones : {1}", task.Result.Item1, task.Result.Item2);
Console.ReadLine();
}
static void Main(string[] args)
{
using (var qsim = new QuantumSimulator())
{
Result[] initals = new Result[] { Result.Zero, Result.One };
foreach (Result inital in initals)
{
var res = BellTest.Run(qsim, 1000, inital).Result;
Console.WriteLine("for inital of {2} ==> 0: {0} 1: {1} - Agree:{3}", res.Item1, res.Item2, inital, res.Item3);
}
Console.ReadKey();
}
}
static void Main(string[] args)
{
using (var qsim = new QuantumSimulator())
{
// Try initial values
var res = BellTest.Run(qsim).Result;
var(numZeros, numOnes, agree) = res;
Console.WriteLine($"# of 0s={numZeros,-4}");
Console.WriteLine($"# of 1s={numOnes,-4}");
Console.WriteLine($"agree={agree,-4}");
System.Console.WriteLine();
}
}
static void Main(string[] args)
{
using (var sim = new QuantumSimulator())
{
for (int i = 0; i < 100; i++)
{
var(s1, s2) = BellTest.Run(sim).Result;
Console.WriteLine($"第{i}次：Q1状态 {s1,-5} Q2状态 {s2,-5}");
}
}
Console.WriteLine("按任意键继续...");
Console.ReadKey();
}
static void Main(string[] args)
{
/*
* Объявление переменной `sim`, отвечающей за квантовый симулятор.
* После выхода из блока `using` память, выделенная под `sim`, освобождается.
*/
using (var sim = new QuantumSimulator())
{
/*
* Объявление массива из двух элементов типа `Result`:
* `Zero` и `One`.
*/
Result[] initials = new Result[] { Result.Zero, Result.One };
/*
* Для каждого элемента массива `initials` провести 1000
* экспериментов программы `BellTest`.
*/
foreach (Result initial in initials)
{
/*
* `BellTest` представляет собой класс, у которого есть
* метод `Run` - для запуска эксперимента на симуляторе `sim`.
*
* Следующими аргументами передаются параметры для самой
* операции `BellTest` из Q#-файла `Bell.qs` - число
* экспериментов и начальное состояние нулевого кубита.
*/
var res = BellTest.Run(sim, 1000, initial).Result;
/*
* Переменная `res` - это кортеж (tuple) из:
* числа измерений, в которых был получен ноль (|0>),
* числа измерений, в которых была получена единица (|1>),
* числа измерений, в которых состояния нулевого и первого кубитов совпадают.
*/
var(numZeros, numOnes, agree) = res;
/*
* Вывод на экран.
*/
System.Console.WriteLine(
$"Init: {initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree,-4}"
);
}
}
System.Console.WriteLine("Press any key to continue...");
System.Console.ReadKey();
}
static void Main(string[] args)
{
using (var qsim = new QuantumSimulator())
{
// Try initial values
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
var res = BellTest.Run(qsim, 1000, initial).Result;
var(numZeros, numOnes) = res;
System.Console.WriteLine(
$"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4}");
}
}
}
static void Main(string[] args)
{
using (var sim = new QuantumSimulator())
{
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
var res = BellTest.Run(sim, 1000, initial).Result;
var(numZeros, numOnes) = res;
System.Console.WriteLine($"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4}");
}
}
System.Console.WriteLine("Press any key to continue");
System.Console.ReadKey();
}
static void Main(string[] args)
{
// Task 2 - add code here
using (var sim = new QuantumSimulator())
{
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
var count = 1000;
var (numZeros, numOnes, same) = BellTest.Run(sim, count, initial).Result;
System.Console.WriteLine($"Init:{initial,-4} 0s={numZeros, -4} 1s={numOnes, -4} same={same, -4}");
// System.Console.WriteLine("Press any key to continue...");
// System.Console.ReadKey();
}
}
}
static void Main(string[] args)
{
using (var qsim = new QuantumSimulator())
{
var initials = new [] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
var res = BellTest.Run(qsim, 1000, initial).Result;
var(numZeros, numOnes, agree) = res;
Console.WriteLine($"初期状態:{initial,-4} |0>={numZeros,-4} |1>={numOnes,-4} 同一={agree,-4}");
}
}
Console.WriteLine("キーを押したら終了します...");
Console.ReadKey();
}
static void Main(string[] args)
{
using (var qsim = new QuantumSimulator())
{
// Try initial values
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
var res = BellTest.Run(qsim, 1000, initial).Result;
var(numZeros, numOnes, agree) = res;
Console.WriteLine($"Init: {initial, -4} 0s={numZeros, -4} 1s={numOnes, -4}, agree={agree, -4}");
}
}
Console.WriteLine("Press any key to continue...");
Console.ReadLine();
}
private static void Main()
{
using (var qsim = new QuantumSimulator())
{
Clear();
HelloQ.Run(qsim).Wait();
// prova i valori iniziali
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
var res = BellTest.Run(qsim, 1000, initial).Result;
var(numZeros, numOnes, agree) = res;
WriteLine($"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree,-4}");
}
}
ReadKey();
}
static void Main(string[] args)
{
//Erzeugen des Quantumsimulators
using (var quantumSimulator = new QuantumSimulator())
{
//Erzeugung zweier anfänglicher Messergebnisse(Resultate) von Null und Eins
Result[] initials = new Result[] { Result.Zero, Result.One };
//Für jedes Messergebnis(Resultat), zwei an der Zahl, wird der Quantensimulator gestartet
foreach (Result initial in initials)
{
var result = BellTest.Run(quantumSimulator, 1000, initial).Result;
var(numZeros, numOnes, agree) = result;
System.Console.WriteLine($"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree, -4}");
}
}
System.Console.WriteLine("Press any key to continue...");
System.Console.ReadKey();
}
static void Main(string[] args)
{
using (var sim = new QuantumSimulator()) // 'sim' is the Q# quantum simulator
{
// Try initial values
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
var res = BellTest.Run(sim, 1000, initial).Result; // 'Run' is the method to run the quantum simulation
// 'Run' is asynchronous, but fetching the 'Result' property blocks
// execution until the task completes and makes this synchronous.
var(numZeros, numOnes, agree) = res;
System.Console.WriteLine(
$"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree,-4}");
}
}
System.Console.WriteLine("Press any key to continue...");
System.Console.ReadKey();
}
static void Main(string[] args)
{
using (var sim = new QuantumSimulator()) // sim is the simulator
{
// Try initial values
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials) //Compute any arguments required for the quantum algorithm.
{
var res = BellTest.Run(sim, 1000, initial).Result; //In the example, count is fixed at a 1000 and initial is the initial value of the qubit.
var(numZeros, numOnes) = res;
// var (numZeros, numOnes, agree) = res;
System.Console.WriteLine(
$"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4}");
//System.Console.WriteLine(
// $"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree,-4}");
}
}
System.Console.WriteLine("Press any key to continue...");
System.Console.ReadKey();
}
static void Main(string[] args)
{
// aloca dinamicamente um simulador para executar o código quantico
using (var SIM = new QuantumSimulator())
{
Result[] estados_iniciais = new Result[] { Result.Zero, Result.One };
foreach (Result estado in estados_iniciais)
{
// computa o teste: cont=1000 inicial=estados_iniciais
var resp = BellTest.Run(SIM, 1000, estado).Result;
var(numZeros, numUns) = resp;
System.Console.WriteLine($"Resultado:{estado, -4} 0s={numZeros, -4} 1s={numUns, -4}");
}
}
System.Console.WriteLine("Pressione qualquer tecla para continuar...");
System.Console.ReadKey();
}
static void Main(string[] args)
{
var estimator = new ResourcesEstimator();
BellTest.Run(estimator, 1000, Result.Zero).Wait();
System.Console.WriteLine(estimator.ToTSV());
/*using (var qsim = new QuantumSimulator())
* {
* Result[] initials = new Result[] { Result.Zero, Result.One };
* foreach(Result initial in initials)
* {
* var res = BellTest.Run(qsim, 1000, initial).Result;
* var (numZeros, numOnes, agree) = res;
* System.Console.WriteLine(
* $"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree,-4}");
* }
* }*/
System.Console.WriteLine("Press any key to continue...");
Console.ReadKey();
}
static void Main(string[] args)
{
var qsim = new ResourcesEstimator();
BellTest.Run(qsim, 1000, Result.Zero).Wait();
System.Console.WriteLine(qsim.ToTSV());
//using (var qsim = new QuantumSimulator())
//{
// //Try initial values
// Result[] initials = new Result[] { Result.Zero, Result.One };
// foreach (Result initial in initials)
// {
// var res = BellTest.Run(qsim, 1000, initial).Result;
// var (numZeroes, numOnes, agree) = res;
// System.Console.WriteLine($"Init:{initial,-4} 0s={numZeroes,-4} 1s={numOnes,-4} agree={agree, -4}");
// }
//}
System.Console.WriteLine("Press any key to continue...");
Console.ReadKey();
}
static void Main(string[] args)
{
using (var qsim = new QuantumSimulator())
{
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (Result initial in initials)
{
var res = BellTest.Run(qsim, 1000, initial).Result;
var(numZeros, numOnes, agree) = res;
System.Console.WriteLine(
$"Init:{initial,-4} 0s={numZeros,-4} 1s={numOnes,-4} agree={agree,-4}");
}
}
//run this instead of the above using block for resource estimation
//var estimator = new ResourcesEstimator();
//BellTest.Run(estimator, 1000, Result.Zero).Wait();
//System.Console.WriteLine(estimator.ToTSV());
Console.WriteLine("Press any key to continue...");
Console.ReadKey();
}
static void Main(string[] args)
{
void PressKey(string name)
{
Console.WriteLine($"\n\nPress any key to start {name}\n\n");
Console.ReadKey();
}
using (var qsim = new QuantumSimulator())
{
PressKey("Reversable gate");
for (int i = 0; i < 5; ++i)
{
var initialValue = i % 2 == 0 ? Result.Zero : Result.One;
var result = ReversableGate.Run(qsim, initialValue).Result;
Console.WriteLine($"Reversable gate result is: " +
$"{result}. Initial value: {initialValue}");
}
PressKey("Measurement superposition collapsing");
for (int i = 0; i < 15; ++i)
{
var initialValue = i % 2 == 0 ? Result.One : Result.Zero;
var result = MeasurementCollapsingSuperposition
.Run(qsim, initialValue).Result;
Console.WriteLine(
$"Reversable gate result is: {result.Item1}. " +
$"Result2: {result.Item2}. Inital value: {initialValue}");
}
PressKey("Random number generator");
for (int i = 0; i < 10; ++i)
{
var randomNumber = GenerateRandomNumber.Run(qsim).Result;
Console.WriteLine($"Random number is: {randomNumber}");
}
PressKey("Bell test");
Result[] initials = new Result[] { Result.Zero, Result.One };
foreach (var initial in initials)
{
var res = BellTest.Run(qsim, 1000, initial).Result;
var(numZeros, numOnes, agrees) = res;
Console.WriteLine($"" +
$"Init:{initial,-4} " +
$"0s={numZeros,-4} " +
$"1s={numOnes,-4} " +
$"Agrees = {agrees,-4}");
}
PressKey("Deutsch-Jozsa");
var const0Result = Constant0.Run(qsim).Result;
var const1Result = Constant1.Run(qsim).Result;
var negationResult = Negation.Run(qsim).Result;
var identityResult = Identity.Run(qsim).Result;
Console.WriteLine($"Const0: " +
$"{const0Result.Item1} " +
$"{const0Result.Item2} " +
$"{const0Result.Item3}");
Console.WriteLine($"Const1: " +
$"{const1Result.Item1} " +
$"{const1Result.Item2} " +
$"{const1Result.Item3}");
Console.WriteLine($"Identity: " +
$"{identityResult.Item1} " +
$"{identityResult.Item2} " +
$"{identityResult.Item3}");
Console.WriteLine($"Negation: " +
$"{negationResult.Item1} " +
$"{negationResult.Item2} " +
$"{negationResult.Item3}");
PressKey("Teleportation part 1");
for (int i = 0; i < 5; ++i)
{
Console.WriteLine($"Teleport (msg==false): " +
$"{SendMessage.Run(qsim, false).Result}");
}
PressKey("Teleportation part 2");
for (int i = 0; i < 5; ++i)
{
Console.WriteLine($"Teleport (msg==true): " +
$"{SendMessage.Run(qsim, true).Result}");
}
}
Console.WriteLine("\n\nEnd");
Console.ReadKey();
}
