public static void SwitchToAdvancedSettings(AutomationRunner testRunner, AutomationTesterHarness resultsHarness)
{
if (testRunner.NameExists("SettingsAndControls"))
{
testRunner.ClickByName("SettingsAndControls", 1);
testRunner.Wait(.5);
}
resultsHarness.AddTestResult(testRunner.ClickByName("User Level Dropdown", 1), "Click Settings Mode dropdown");
resultsHarness.AddTestResult(testRunner.ClickByName("Advanced Menu Item", 1), "Click 'Advanced' settings");
testRunner.Wait(.5);
}
public void EditButtonTurnsOnOffEditMode()
{
//Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
/*
* Tests that when the edit button is clicked we go into editmode (print queue items have checkboxes on them)
* 1. After Edit button is clicked print queue items have check boxes
* 2. Selecting multiple queue itema and then clicking the Remove button removes the item
* 3. Selecting multiple queue items and then clicking the Remove button decreases the queue tab count by one
*/
bool checkboxExists = testRunner.WaitForName("Queue Item Checkbox", 2);
resultsHarness.AddTestResult(checkboxExists == false);
resultsHarness.AddTestResult(QueueData.Instance.Count == 4);
SystemWindow systemWindow;
string itemName = "Queue Item " + "2013-01-25_Mouthpiece_v2";
GuiWidget queueItem = testRunner.GetWidgetByName(itemName, out systemWindow, 3);
SearchRegion queueItemRegion = testRunner.GetRegionByName(itemName, 3);
{
testRunner.ClickByName("Queue Edit Button", 2);
SystemWindow containingWindow;
GuiWidget foundWidget = testRunner.GetWidgetByName("Queue Item Checkbox", out containingWindow, 3, searchRegion: queueItemRegion);
resultsHarness.AddTestResult(foundWidget != null, "We should have an actual checkbox");
}
{
testRunner.ClickByName("Queue Done Button", 2);
testRunner.Wait(.5);
SystemWindow containingWindow;
GuiWidget foundWidget = testRunner.GetWidgetByName("Queue Item Checkbox", out containingWindow, 1, searchRegion: queueItemRegion);
resultsHarness.AddTestResult(foundWidget == null, "We should not have an actual checkbox");
}
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun, queueItemFolderToAdd: QueueTemplate.Three_Queue_Items, overrideWidth: 600);
Assert.IsTrue(testHarness.AllTestsPassed(4));
}
public void DownloadsAddButtonAddsZipFiles()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
string firstItemName = "Row Item " + "Chinese Dragon";
string secondItemName = "Row Item " + "chichen-itza pyramid";
string thirdItemName = "Row Item " + "Circle Calibration";
//Navigate to Downloads Library Provider
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Downloads Row Item Collection");
testRunner.ClickByName("Library Add Button");
testRunner.Wait(3);
//Get parts to add
string rowItemPath = MatterControlUtilities.PathToQueueItemsFolder("Test.zip");
//Get files to delete from Downloads once each test has completed and then add them to List
string firstFileToDelete = Path.Combine(MatterControlUtilities.PathToDownloadsFolder, "Circle Calibration.stl");
string secondFileToDelete = Path.Combine(MatterControlUtilities.PathToDownloadsFolder, "Chinese Dragon.stl");
string thirdFileToDelete = Path.Combine(MatterControlUtilities.PathToDownloadsFolder, "chichen-itza_pyramid.stl");
addedFiles.Add(firstFileToDelete);
addedFiles.Add(secondFileToDelete);
addedFiles.Add(thirdFileToDelete);
//Add AMF part items to Downloads and then type paths into file dialogues
testRunner.Wait(2);
testRunner.Type(rowItemPath);
testRunner.Wait(1);
testRunner.Type("{Enter}");
//Get test results
bool firstRowItemWasAdded = testRunner.WaitForName(firstItemName, 2);
resultsHarness.AddTestResult(firstRowItemWasAdded == true);
bool secondRowItemWasAdded = testRunner.WaitForName(secondItemName, 2);
resultsHarness.AddTestResult(secondRowItemWasAdded == true);
bool thirdRowItemWasAdded = testRunner.WaitForName(thirdItemName, 2);
resultsHarness.AddTestResult(thirdRowItemWasAdded == true);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
MatterControlUtilities.CleanUpDownloadsDirectoryAfterTest(addedFiles);
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 3); // make sure we ran all our tests
}
public void AddToQueueFromLibraryButtonAddsItemToQueue()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
//Navigate to Local Library
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Local Library Row Item Collection");
testRunner.Wait(1);
testRunner.ClickByName("Library Edit Button");
testRunner.Wait(1);
//Select Library Item
string rowItemOne = "Row Item " + "Calibration - Box";
testRunner.ClickByName(rowItemOne);
testRunner.Wait(1);
int queueCountBeforeAdd = QueueData.Instance.Count;
//Add Library Item to the Print Queue
MatterControlUtilities.LibraryAddSelectionToQueue(testRunner);
testRunner.Wait(2);
//Make sure that the Queue Count increases by one
int queueCountAfterAdd = QueueData.Instance.Count;
resultsHarness.AddTestResult(queueCountAfterAdd == queueCountBeforeAdd + 1);
//Navigate to Queue
testRunner.ClickByName("Queue Tab");
testRunner.Wait(1);
//Make sure that the Print Item was added
string queueItem = "Queue Item " + "Calibration - Box";
bool queueItemWasAdded = testRunner.WaitForName(queueItem, 2);
resultsHarness.AddTestResult(queueItemWasAdded == true);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
Assert.IsTrue(testHarness.AllTestsPassed(2));
}
public void ExportAsGcode()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.SelectAndAddPrinter(testRunner, "Airwolf 3D", "HD", true);
string firstItemName = "Row Item Batman";
//Navigate to Downloads Library Provider
testRunner.ClickByName("Queue Tab");
testRunner.ClickByName("Queue Add Button", 2);
//Get parts to add
string rowItemPath = MatterControlUtilities.GetTestItemPath("Batman.stl");
//Add STL part items to Downloads and then type paths into file dialogue
testRunner.Wait(1);
testRunner.Type(MatterControlUtilities.GetTestItemPath("Batman.stl"));
testRunner.Wait(1);
testRunner.Type("{Enter}");
//Get test results
resultsHarness.AddTestResult(testRunner.WaitForName(firstItemName, 2) == true);
testRunner.ClickByName("Queue Edit Button");
testRunner.ClickByName(firstItemName);
testRunner.ClickByName("Queue Export Button");
testRunner.Wait(2);
testRunner.WaitForName("Export Item Window", 2);
testRunner.ClickByName("Export as GCode Button", 2);
testRunner.Wait(2);
string gcodeExportPath = MatterControlUtilities.PathToExportGcodeFolder;
testRunner.Type(gcodeExportPath);
testRunner.Type("{Enter}");
testRunner.Wait(2);
Console.WriteLine(gcodeExportPath);
resultsHarness.AddTestResult(File.Exists(gcodeExportPath) == true);
Debugger.Break();
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 2);
}
public void LibraryQueueViewRefreshesOnAddItem()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
testRunner.ClickByName("Library Tab", 5);
MatterControlUtilities.NavigateToFolder(testRunner, "Local Library Row Item Collection");
testRunner.Wait(1);
testRunner.ClickByName("Row Item Calibration - Box");
testRunner.ClickByName("Row Item Calibration - Box View Button");
testRunner.Wait(1);
SystemWindow systemWindow;
GuiWidget partPreview = testRunner.GetWidgetByName("View3DWidget", out systemWindow, 3);
View3DWidget view3D = partPreview as View3DWidget;
resultsHarness.AddTestResult(testRunner.ClickByName("3D View Edit", 3));
resultsHarness.AddTestResult(testRunner.ClickByName("3D View Copy", 3), "Click Copy");
// wait for the copy to finish
testRunner.Wait(.1);
resultsHarness.AddTestResult(testRunner.ClickByName("3D View Remove", 3), "Click Delete");
resultsHarness.AddTestResult(testRunner.ClickByName("Save As Menu", 3), "Click Save As Menu");
resultsHarness.AddTestResult(testRunner.ClickByName("Save As Menu Item", 3), "Click Save As");
testRunner.Wait(1);
testRunner.Type("0Test Part");
resultsHarness.AddTestResult(MatterControlUtilities.NavigateToFolder(testRunner, "Local Library Row Item Collection"));
resultsHarness.AddTestResult(testRunner.ClickByName("Save As Save Button", 1));
view3D.CloseOnIdle();
testRunner.Wait(.5);
// ensure that it is now in the library folder (that the folder updated)
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item " + "0Test Part", 5), "The part we added should be in the library");
testRunner.Wait(.5);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun, queueItemFolderToAdd: QueueTemplate.Three_Queue_Items);
Assert.IsTrue(testHarness.AllTestsPassed(8));
}
public void CopyButtonClickedMakesCopyOfPartOnBed()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
SystemWindow systemWindow;
//Navigate to Local Library
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Local Library Row Item Collection");
testRunner.Wait(1);
testRunner.ClickByName("Row Item Calibration - Box");
testRunner.ClickByName("Row Item Calibration - Box Print Button");
testRunner.Wait(1);
//Get View3DWidget and count MeshGroups before Copy button is clicked
GuiWidget partPreview = testRunner.GetWidgetByName("View3DWidget", out systemWindow, 3);
View3DWidget view3D = partPreview as View3DWidget;
string copyButtonName = "3D View Copy";
//Click Edit button to make edit controls visible
testRunner.ClickByName("3D View Edit");
testRunner.Wait(1);
int partCountBeforeCopy = view3D.MeshGroups.Count();
resultsHarness.AddTestResult(partCountBeforeCopy == 1);
//Click Copy button and count MeshGroups
testRunner.ClickByName(copyButtonName);
System.Threading.Thread.Sleep(2000);
int partCountAfterCopy = view3D.MeshGroups.Count();
resultsHarness.AddTestResult(partCountAfterCopy == 2);
testRunner.Wait(1);
//Click Copy button a second time and count MeshGroups again
testRunner.ClickByName(copyButtonName);
System.Threading.Thread.Sleep(2000);
int partCountAfterSecondCopy = view3D.MeshGroups.Count();
resultsHarness.AddTestResult(partCountAfterSecondCopy == 3);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 3); // make sure we ran all our tests
}
public void SaveAsToLocalLibrary()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
//Navigate to Local Library
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Local Library Row Item Collection");
testRunner.Wait(1);
testRunner.ClickByName("Row Item Calibration - Box");
testRunner.ClickByName("Row Item Calibration - Box Print Button");
testRunner.Wait(1);
//Click Edit button to make edit controls visible
testRunner.ClickByName("3D View Edit");
testRunner.Wait(1);
for (int i = 0; i <= 2; i++)
{
testRunner.ClickByName("3D View Copy");
testRunner.Wait(1);
}
//Click Save As button to save changes to the part
testRunner.ClickByName("Save As Menu");
testRunner.Wait(1);
testRunner.ClickByName("Save As Menu Item");
testRunner.Wait(1);
//Type in name of new part and then save to Local Library
testRunner.Type("Save As Local Library");
MatterControlUtilities.NavigateToFolder(testRunner, "Local Library Row Item Collection");
testRunner.Wait(1);
testRunner.ClickByName("Save As Save Button");
//Make sure there is a new Local Library item with a name that matcheds the new opart
testRunner.Wait(1);
testRunner.ClickByName("Library Tab");
testRunner.Wait(10);
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item Save As Local Library", 5));
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 1); // make sure we ran all our tests
}
public void ClickQueueRoWItemViewAndRemove()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
/*
* Tests:
* 1. When the remove button on a queue item is clicked the queue tab count decreases by one
* 2. When the remove button on a queue item is clicked the item is removed
* 3. When the View button on a queue item is clicked the part preview window is opened
*/
testRunner.Wait(2);
int currentQueueItemCount = QueueData.Instance.Count;
resultsHarness.AddTestResult(testRunner.WaitForName("Queue Item " + "Batman", 1));
resultsHarness.AddTestResult(testRunner.WaitForName("Queue Item " + "2013-01-25_Mouthpiece_v2", 1));
testRunner.ClickByName("Queue Item " + "Batman", 1);
testRunner.ClickByName("Queue Item " + "Batman" + " Remove");
testRunner.Wait(2);
int queueItemCountAfterRemove = QueueData.Instance.Count;
resultsHarness.AddTestResult(currentQueueItemCount - 1 == queueItemCountAfterRemove);
bool batmanQueueItemExists = testRunner.WaitForName("Queue Item " + "Batman", 1);
resultsHarness.AddTestResult(batmanQueueItemExists == false);
bool partPreviewWindowExists1 = testRunner.WaitForName("Queue Item " + "2013-01-25_Mouthpiece_v2" + " Part Preview", 1);
resultsHarness.AddTestResult(partPreviewWindowExists1 == false);
testRunner.ClickByName("Queue Item " + "2013-01-25_Mouthpiece_v2", 1);
testRunner.Wait(2);
testRunner.ClickByName("Queue Item " + "2013-01-25_Mouthpiece_v2" + " View", 1);
bool partPreviewWindowExists2 = testRunner.WaitForName("Queue Item " + "2013-01-25_Mouthpiece_v2" + " Part Preview", 2);
resultsHarness.AddTestResult(partPreviewWindowExists2 == true);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun, queueItemFolderToAdd: QueueTemplate.Three_Queue_Items, overrideWidth: 600);
Assert.IsTrue(testHarness.AllTestsPassed(6));
}
public void LocalLibraryAddButtonAddsMultipleItemsToLibrary()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
//Names of Items to be added
string firstItemName = "Row Item " + "Fennec Fox";
string secondItemName = "Row Item " + "Batman";
//Navigate to Local Library
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Local Library Row Item Collection");
//Make sure both Items do not exist before the test begins
bool firstItemExists = testRunner.WaitForName(firstItemName, 1);
bool secondItemExists = testRunner.WaitForName(secondItemName, 1);
resultsHarness.AddTestResult(firstItemExists == false);
resultsHarness.AddTestResult(secondItemExists == false);
//Click Local Library Add Button
testRunner.ClickByName("Library Add Button");
//Get Library Item to Add
string firstRowItemPath = MatterControlUtilities.GetTestItemPath("Fennec_Fox.stl");
string secondRowItemPath = MatterControlUtilities.GetTestItemPath("Batman.stl");
string textForBothRowItems = String.Format("\"{0}\" \"{1}\"", firstRowItemPath, secondRowItemPath);
testRunner.Wait(2);
testRunner.Type(textForBothRowItems);
testRunner.Wait(1);
testRunner.Type("{Enter}");
bool firstRowItemWasAdded = testRunner.WaitForName(firstItemName, 2);
bool secondRowItemWasAdded = testRunner.WaitForName(secondItemName, 2);
resultsHarness.AddTestResult(firstRowItemWasAdded == true);
resultsHarness.AddTestResult(secondRowItemWasAdded == true);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 4); // make sure we ran all our tests
}
public void ClickOnLibraryCheckBoxes()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUITests.DefaultTestImages);
// Now do the actions specific to this test. (replace this for new tests)
{
testRunner.ClickByName("Library Tab");
testRunner.Wait(1);
SystemWindow systemWindow;
GuiWidget rowItem = testRunner.GetWidgetByName("Local Library Row Item Collection", out systemWindow);
testRunner.Wait(1);
SearchRegion rowItemRegion = testRunner.GetRegionByName("Local Library Row Item Collection");
testRunner.ClickByName("Library Edit Button");
testRunner.Wait(1);
SystemWindow containingWindow;
GuiWidget foundWidget = testRunner.GetWidgetByName("Row Item Select Checkbox", out containingWindow, searchRegion: rowItemRegion);
CheckBox checkBoxWidget = foundWidget as CheckBox;
resultsHarness.AddTestResult(checkBoxWidget != null, "We should have an actual checkbox");
resultsHarness.AddTestResult(checkBoxWidget.Checked == false, "currently not checked");
testRunner.ClickByName("Row Item Select Checkbox", searchRegion: rowItemRegion);
testRunner.Wait(.5);
resultsHarness.AddTestResult(checkBoxWidget.Checked == true, "currently checked");
testRunner.ClickByName("Local Library Row Item Collection");
testRunner.Wait(.5);
resultsHarness.AddTestResult(checkBoxWidget.Checked == false, "currently not checked");
MatterControlUITests.CloseMatterControl(testRunner);
}
};
#if !__ANDROID__
// Set the static data to point to the directory of MatterControl
StaticData.Instance = new MatterHackers.Agg.FileSystemStaticData(Path.Combine("..", "..", "..", "..", "StaticData"));
#endif
bool showWindow;
MatterControlApplication matterControlWindow = MatterControlApplication.CreateInstance(out showWindow);
AutomationTesterHarness testHarness = AutomationTesterHarness.ShowWindowAndExectueTests(matterControlWindow, testToRun, 1000);
// NOTE: In the future we may want to make the "Local Library Row Item Collection" not clickable.
// If that is the case fix this test to click on a child of "Local Library Row Item Collection" instead.
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 4); // make sure we ran all our tests
}
public void DownloadsAddButtonAddsMultipleFiles()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
string itemName = "Row Item " + "Fennec Fox";
string itemNameTwo = "Row Item " + "Batman";
//Navigate to Downloads Library Provider
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Downloads Row Item Collection");
testRunner.ClickByName("Library Add Button");
testRunner.Wait(3);
//Get parts to add
string rowItemPath = MatterControlUtilities.PathToQueueItemsFolder("Fennec_Fox.stl");
string secondRowItemPath = MatterControlUtilities.PathToQueueItemsFolder("Batman.stl");
//Get files to delete from Downloads once each test has completed and then add them to List
string firstFileToDelete = Path.Combine(MatterControlUtilities.PathToDownloadsFolder, "Fennec_Fox.stl");
string secondFileToDelete = Path.Combine(MatterControlUtilities.PathToDownloadsFolder, "Batman.stl");
addedFiles.Add(firstFileToDelete);
addedFiles.Add(secondFileToDelete);
//Format text to add both items to Downloads and then type paths into file dialogues
string textForBothRowItems = String.Format("\"{0}\" \"{1}\"", rowItemPath, secondRowItemPath);
testRunner.Wait(2);
testRunner.Type(textForBothRowItems);
testRunner.Wait(1);
testRunner.Type("{Enter}");
//Get test results
bool rowItemWasAdded = testRunner.WaitForName(itemName, 2);
resultsHarness.AddTestResult(rowItemWasAdded == true);
bool secondRowItemWasAdded = testRunner.WaitForName(itemNameTwo, 2);
resultsHarness.AddTestResult(secondRowItemWasAdded == true);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
MatterControlUtilities.CleanUpDownloadsDirectoryAfterTest(addedFiles);
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 2); // make sure we ran all our tests
}
public void DownloadsAddButtonAddsMultipleFiles()
{
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
MatterControlUtilities.CreateDownloadsSubFolder();
//Navigate to Downloads Library Provider
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Downloads Row Item Collection");
MatterControlUtilities.NavigateToFolder(testRunner, "-Temporary Row Item Collection");
testRunner.ClickByName("Library Add Button");
testRunner.Wait(3);
testRunner.Wait(2);
// Add both files to the FileOpen dialog
testRunner.Type(
string.Format(
"\"{0}\" \"{1}\"",
MatterControlUtilities.GetTestItemPath("Fennec_Fox.stl"),
MatterControlUtilities.GetTestItemPath("Batman.stl")));
testRunner.Wait(1);
testRunner.Type("{Enter}");
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item Fennec Fox", 2), "Fennec Fox item exists");
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item Batman", 2), "Batman item exists");
testRunner.Wait(1);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = null;
try
{
testHarness = MatterControlUtilities.RunTest(testToRun);
}
catch { }
finally
{
MatterControlUtilities.DeleteDownloadsSubFolder();
}
Assert.IsTrue(testHarness.AllTestsPassed(2));
}
public void DownloadsAddButtonAddsZipFiles()
{
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
MatterControlUtilities.CreateDownloadsSubFolder();
// Navigate to Downloads Library Provider
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Downloads Row Item Collection");
MatterControlUtilities.NavigateToFolder(testRunner, "-Temporary Row Item Collection");
testRunner.ClickByName("Library Add Button");
testRunner.Wait(2);
// Add AMF part items to Downloads and then type paths into file dialogs
testRunner.Wait(2);
testRunner.Type(MatterControlUtilities.GetTestItemPath("Test.zip"));
testRunner.Wait(1);
testRunner.Type("{Enter}");
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item Chinese Dragon", 2), "Chinese Dragon item exists");
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item chichen-itza pyramid", 2), "chichen-itza item exists");
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item Circle Calibration", 2), "Circle Calibration item exists");
testRunner.Wait(1);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = null;
try
{
testHarness = MatterControlUtilities.RunTest(testToRun);
}
catch { }
// Give MatterControl a moment to shutdown
Thread.Sleep(2000);
try
{
// Then attempt to clean up
MatterControlUtilities.DeleteDownloadsSubFolder();
}
catch { }
Assert.IsTrue(testHarness.AllTestsPassed(3));
}
public void RaftEnabledPassedToSliceEngine()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.SelectAndAddPrinter(testRunner, "Airwolf 3D", "HD", true);
//Navigate to Local Library
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Local Library Row Item Collection");
testRunner.Wait(1);
testRunner.ClickByName("Row Item Calibration - Box");
testRunner.ClickByName("Row Item Calibration - Box Print Button");
testRunner.Wait(1);
testRunner.ClickByName("Layer View Tab");
testRunner.ClickByName("Bread Crumb Button Home");
testRunner.Wait(1);
testRunner.ClickByName("SettingsAndControls");
testRunner.Wait(1);
testRunner.ClickByName("User Level Dropdown");
testRunner.Wait(1);
testRunner.ClickByName("Advanced Menu Item");
testRunner.Wait(1);
testRunner.ClickByName("Skirt and Raft Tab");
testRunner.Wait(1);
testRunner.ClickByName("Create Raft Checkbox");
testRunner.Wait(1.5);
testRunner.ClickByName("Save Slice Settings Button");
testRunner.ClickByName("Generate Gcode Button");
testRunner.Wait(5);
//Call compare slice settings methode here
resultsHarness.AddTestResult(MatterControlUtilities.CompareExpectedSliceSettingValueWithActualVaue("enableRaft", "True"));
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 1); // make sure we ran all our tests
}
public void PauseOnLayerDoesPauseOnPrint()
{
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner();
{
MatterControlUtilities.PrepForTestRun(testRunner, MatterControlUtilities.PrepAction.CloseSignInAndPrinterSelect);
var emualtorProccess = MatterControlUtilities.LaunchAndConnectToPrinterEmulator(testRunner);
resultsHarness.AddTestResult(ProfileManager.Instance.ActiveProfile != null);
MatterControlUtilities.SwitchToAdvancedSettings(testRunner, resultsHarness);
resultsHarness.AddTestResult(testRunner.ClickByName("General Tab", 1));
resultsHarness.AddTestResult(testRunner.ClickByName("Single Print Tab", 1));
resultsHarness.AddTestResult(testRunner.ClickByName("Layer(s) To Pause:" + " Edit"));
testRunner.Type("4;2;a;not;6");
resultsHarness.AddTestResult(testRunner.ClickByName("Layer View Tab"));
resultsHarness.AddTestResult(testRunner.ClickByName("Generate Gcode Button", 1));
resultsHarness.AddTestResult(testRunner.ClickByName("Display Checkbox", 10));
resultsHarness.AddTestResult(testRunner.ClickByName("Sync To Print Checkbox", 1));
resultsHarness.AddTestResult(testRunner.ClickByName("Start Print Button", 1));
WaitForLayerAndResume(resultsHarness, testRunner, 2);
WaitForLayerAndResume(resultsHarness, testRunner, 4);
WaitForLayerAndResume(resultsHarness, testRunner, 6);
resultsHarness.AddTestResult(testRunner.WaitForName("Done Button", 30));
resultsHarness.AddTestResult(testRunner.WaitForName("Print Again Button", 1));
try
{
emualtorProccess.Kill();
}
catch {}
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun, maxTimeToRun: 200);
Assert.IsTrue(testHarness.AllTestsPassed(19));
}
public void RenameDownloadsPrintItem()
{
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.CreateDownloadsSubFolder();
//Navigate to Downloads Library Provider
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Downloads Row Item Collection");
MatterControlUtilities.NavigateToFolder(testRunner, "Temporary Row Item Collection");
testRunner.ClickByName("Library Add Button");
testRunner.Wait(2);
testRunner.Type(MatterControlUtilities.GetTestItemPath("Batman.stl"));
testRunner.Wait(1);
testRunner.Type("{Enter}");
//Rename added item
testRunner.ClickByName("Library Edit Button", 2);
testRunner.ClickByName("Row Item Batman");
testRunner.ClickByName("Rename From Library Button", 2);
testRunner.Wait(2);
testRunner.Type("Batman Renamed");
testRunner.ClickByName("Rename Button");
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item Batman Renamed", 2) == true);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = null;
try
{
testHarness = MatterControlUtilities.RunTest(testToRun);
}
catch { }
finally
{
MatterControlUtilities.CleanupDownloadsDirectory(MatterControlUtilities.PathToDownloadsSubFolder);
}
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 1);
}
public void AddMuiltipleItemsToQueue()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
/*
* Tests that Add button can add multiple files to the print queue:
* 1. The Queue count is increased by 2
* 2. 2 QueueRowItems are created and added to the queue
*/
int queueCountBeforeAdd = QueueData.Instance.Count;
//Click Add Button and Add Part To Queue
testRunner.ClickByName("Queue Add Button", 2);
string pathToFirstQueueItem = MatterControlUtilities.GetTestItemPath("Fennec_Fox.stl");
testRunner.Wait(1);
string pathToSecondQueueItem = MatterControlUtilities.GetTestItemPath("Batman.stl");
string textForBothQueueItems = String.Format("\"{0}\" \"{1}\"", pathToFirstQueueItem, pathToSecondQueueItem);
testRunner.Type(textForBothQueueItems);
testRunner.Wait(2);
testRunner.Type("{Enter}");
testRunner.Wait(2);
//Confirm that both items were added and that the queue count increases by the appropriate number
int queueCountAfterAdd = QueueData.Instance.Count;
resultsHarness.AddTestResult(QueueData.Instance.Count == queueCountBeforeAdd + 2);
bool firstQueueItemWasAdded = testRunner.WaitForName("Queue Item " + "Fennec_Fox", 2);
bool secondQueueItemWasAdded = testRunner.WaitForName("Queue Item " + "Batman", 2);
resultsHarness.AddTestResult(firstQueueItemWasAdded == true);
resultsHarness.AddTestResult(secondQueueItemWasAdded == true);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
Assert.IsTrue(testHarness.AllTestsPassed(3));
}
public void LocalLibraryAddButtonAddZipToLibrary()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
//Items in Batman.zip
string firstItemName = "Row Item " + "Batman";
string secondItemName = "Row Item " + "2013-01-25 Mouthpiece v2";
//Navigate to Local Library
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Local Library Row Item Collection");
//Make sure that Item does not exist before the test begins
bool firstItemInZipExists = testRunner.WaitForName(firstItemName, 1);
bool secondItemInZipExists = testRunner.WaitForName(secondItemName, 1);
resultsHarness.AddTestResult(firstItemInZipExists == false);
resultsHarness.AddTestResult(firstItemInZipExists == false);
//Click Local Library Add Button
testRunner.ClickByName("Library Add Button");
//Get Library Item to Add
string rowItemPath = MatterControlUtilities.GetTestItemPath("Batman.zip");
testRunner.Wait(2);
testRunner.Type(rowItemPath);
testRunner.Wait(1);
testRunner.Type("{Enter}");
bool firstItemInZipWasAdded = testRunner.WaitForName(firstItemName, 2);
bool secondItemInZipWasAdded = testRunner.WaitForName(secondItemName, 2);
resultsHarness.AddTestResult(firstItemInZipWasAdded == true);
resultsHarness.AddTestResult(secondItemInZipWasAdded == true);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 4); // make sure we ran all our tests
}
public void ClickOnLibraryCheckBoxes()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
// Now do the actions specific to this test. (replace this for new tests)
{
MatterControlUtilities.PrepForTestRun(testRunner);
testRunner.ClickByName("Library Tab", 3);
MatterControlUtilities.NavigateToFolder(testRunner, "Local Library Row Item Collection");
SystemWindow systemWindow;
string itemName = "Row Item " + "Calibration - Box";
GuiWidget rowItem = testRunner.GetWidgetByName(itemName, out systemWindow, 3);
SearchRegion rowItemRegion = testRunner.GetRegionByName(itemName, 3);
testRunner.ClickByName("Library Edit Button", 3);
testRunner.Wait(.5);
GuiWidget foundWidget = testRunner.GetWidgetByName("Row Item Select Checkbox", out systemWindow, 3, searchRegion: rowItemRegion);
CheckBox checkBoxWidget = foundWidget as CheckBox;
resultsHarness.AddTestResult(checkBoxWidget != null, "We should have an actual checkbox");
resultsHarness.AddTestResult(checkBoxWidget.Checked == false, "currently not checked");
testRunner.ClickByName("Row Item Select Checkbox", 3, searchRegion: rowItemRegion);
testRunner.ClickByName("Library Tab");
resultsHarness.AddTestResult(checkBoxWidget.Checked == true, "currently checked");
testRunner.ClickByName(itemName, 3);
testRunner.ClickByName("Library Tab");
resultsHarness.AddTestResult(checkBoxWidget.Checked == false, "currently not checked");
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
// NOTE: In the future we may want to make the "Local Library Row Item Collection" not clickable.
// If that is the case fix this test to click on a child of "Local Library Row Item Collection" instead.
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 4); // make sure we ran all our tests
}
public void DownloadsAddButtonAddsMultipleFiles()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
MatterControlUtilities.CreateDownloadsSubFolder();
//Navigate to Downloads Library Provider
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Downloads Row Item Collection");
MatterControlUtilities.NavigateToFolder(testRunner, "Temporary Row Item Collection");
testRunner.ClickByName("Library Add Button");
testRunner.Wait(3);
string firstRowItemPath = MatterControlUtilities.GetTestItemPath("Fennec_Fox.stl");
string secondRowItemPath = MatterControlUtilities.GetTestItemPath("Batman.stl");
string textForBothRowItems = String.Format("\"{0}\" \"{1}\"", firstRowItemPath, secondRowItemPath);
testRunner.Wait(2);
testRunner.Type(textForBothRowItems);
testRunner.Wait(1);
testRunner.Type("{Enter}");
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item Fennec Fox", 2) == true);
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item Batman", 2) == true);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = null;
try
{
testHarness = MatterControlUtilities.RunTest(testToRun);
}
catch { }
finally
{
MatterControlUtilities.CleanupDownloadsDirectory(MatterControlUtilities.PathToDownloadsSubFolder);
}
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 2); // make sure we ran all our tests
}
public void RemoveButtonRemovesMultipleItems()
{
//Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
/*
* Tests that when one item is selected
* 1. Queue Item count equals three before the test starts
* 2. Selecting multiple queue itema and then clicking the Remove button removes the item
* 3. Selecting multiple queue items and then clicking the Remove button decreases the queue tab count by one
*/
int queueItemCount = QueueData.Instance.Count;
testRunner.Wait(2);
testRunner.ClickByName("Queue Edit Button", 2);
testRunner.ClickByName("Queue Item " + "Batman", 2);
testRunner.ClickByName("Queue Remove Button", 2);
testRunner.Wait(1);
int queueItemCountAfterRemove = QueueData.Instance.Count;
resultsHarness.AddTestResult(queueItemCount - 2 == queueItemCountAfterRemove);
bool queueItemExists = testRunner.WaitForName("Queue Item " + "Batman", 2);
bool secondQueueItemExists = testRunner.WaitForName("Queue Item " + "2013-01-25_Mouthpiece_v2", 2);
resultsHarness.AddTestResult(queueItemExists == false);
resultsHarness.AddTestResult(secondQueueItemExists == false);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun, queueItemFolderToAdd: QueueTemplate.Three_Queue_Items);
Assert.IsTrue(testHarness.AllTestsPassed(3));
}
private static void WaitForLayerAndResume(AutomationTesterHarness resultsHarness, AutomationRunner testRunner, int indexToWaitFor)
{
testRunner.WaitForName("Resume Button", 30);
SystemWindow containingWindow;
GuiWidget layerNumber = testRunner.GetWidgetByName("Current GCode Layer Edit", out containingWindow, 20);
layerNumber.Invalidate();
testRunner.WaitUntil(() =>
{
return(layerNumber.Text == indexToWaitFor.ToString());
}, 2);
resultsHarness.AddTestResult(layerNumber.Text == indexToWaitFor.ToString());
resultsHarness.AddTestResult(testRunner.ClickByName("Resume Button", 1));
testRunner.Wait(.1);
}
public void HasHeatedBedCheckedHidesBedTemperatureOptions()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.SelectAndAddPrinter(testRunner, "Airwolf 3D", "HD", true);
//Navigate to Settings Tab and make sure Bed Temp Text box is visible
testRunner.ClickByName("SettingsAndControls");
testRunner.Wait(1);
testRunner.ClickByName("User Level Dropdown");
testRunner.Wait(1);
testRunner.ClickByName("Advanced Menu Item");
testRunner.Wait(1);
testRunner.ClickByName("Filament Tab");
testRunner.Wait(1);
resultsHarness.AddTestResult(testRunner.WaitForName("Bed Temperature Textbox", 2));
//Uncheck Has Heated Bed checkbox and make sure Bed Temp Textbox is not visible
testRunner.ClickByName("Printer Tab");
testRunner.Wait(1);
testRunner.ClickByName("Features Tab");
testRunner.Wait(1);
testRunner.ClickByName("Has Heated Bed Checkbox");
testRunner.Wait(.5);
testRunner.ClickByName("Filament Tab");
testRunner.Wait(1);
bool bedTemperatureTextBoxVisible = testRunner.WaitForName("Bed Temperature Textbox", 2);
resultsHarness.AddTestResult(bedTemperatureTextBoxVisible == false);
//Make sure Bed Temperature Options are not visible in printer controls
testRunner.ClickByName("Controls Tab");
bool bedTemperatureControlsWidget = testRunner.WaitForName("Bed Temperature Controls Widget", 2);
resultsHarness.AddTestResult(bedTemperatureTextBoxVisible == false);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 3); // make sure we ran all our tests
}
public void DownloadsAddButtonAddsZipFiles()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.CreateDownloadsSubFolder();
//Navigate to Downloads Library Provider
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Downloads Row Item Collection");
MatterControlUtilities.NavigateToFolder(testRunner, "Temporary Row Item Collection");
testRunner.ClickByName("Library Add Button");
testRunner.Wait(2);
//Add AMF part items to Downloads and then type paths into file dialogues
testRunner.Wait(2);
testRunner.Type(MatterControlUtilities.GetTestItemPath("Test.zip"));
testRunner.Wait(1);
testRunner.Type("{Enter}");
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item Chinese Dragon", 2) == true);
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item chichen-itza pyramid", 2) == true);
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item Circle Calibration", 2) == true);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = null;
try
{
testHarness = MatterControlUtilities.RunTest(testToRun);
}
catch { }
finally
{
MatterControlUtilities.CleanupDownloadsDirectory(MatterControlUtilities.PathToDownloadsSubFolder);
}
Assert.IsTrue(testHarness.AllTestsPassed);
Assert.IsTrue(testHarness.TestCount == 3);
}
public static AutomationTesterHarness RunTest(Action <AutomationTesterHarness> testToRun, string testDbFolder = null, string staticDataPathOverride = null, double maxTimeToRun = 60)
{
if (staticDataPathOverride == null)
{
staticDataPathOverride = Path.Combine("..", "..", "..", "..", "StaticData");
}
#if !__ANDROID__
// Set the static data to point to the directory of MatterControl
StaticData.Instance = new MatterHackers.Agg.FileSystemStaticData(staticDataPathOverride);
#endif
bool showWindow;
MatterControlUtilities.DataFolderState staticDataState = MatterControlUtilities.MakeNewStaticDataForTesting2(testDbFolder);
MatterControlApplication matterControlWindow = MatterControlApplication.CreateInstance(out showWindow);
AutomationTesterHarness testHarness = AutomationTesterHarness.ShowWindowAndExectueTests(matterControlWindow, testToRun, maxTimeToRun);
MatterControlUtilities.RestoreStaticDataAfterTesting(staticDataState, true);
return(testHarness);
}
public void MatterControlRuns()
{
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner();
{
MatterControlUtilities.PrepForTestRun(testRunner, MatterControlUtilities.PrepAction.CloseSignInAndPrinterSelect);
resultsHarness.AddTestResult(testRunner.NameExists("SettingsAndControls"));
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun, maxTimeToRun: 200);
Assert.IsTrue(testHarness.AllTestsPassed(1));
}
public void DownloadsAddButtonAddsAMFFiles()
{
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
MatterControlUtilities.CreateDownloadsSubFolder();
//Navigate to Downloads Library Provider
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Downloads Row Item Collection");
MatterControlUtilities.NavigateToFolder(testRunner, "-Temporary Row Item Collection");
testRunner.ClickByName("Library Add Button");
testRunner.Wait(2);
//Add AMF part items to Downloads and then type paths into file dialogues
testRunner.Wait(2);
testRunner.Type(MatterControlUtilities.GetTestItemPath("Rook.amf"));
testRunner.Wait(1);
testRunner.Type("{Enter}");
resultsHarness.AddTestResult(testRunner.WaitForName("Row Item Rook", 2), "Rook item exists");
testRunner.Wait(1);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = null;
try
{
testHarness = MatterControlUtilities.RunTest(testToRun);
}
catch { }
finally
{
MatterControlUtilities.DeleteDownloadsSubFolder();
}
Assert.IsTrue(testHarness.AllTestsPassed(1));
}
public void AddSingleItemToQueue()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
/*
* Tests that Queue Add button adds a single part to queue:
* 1. The Queue count is increased by 1
* 2. A QueueRowItem is created and added to the queue
*/
int queueCountBeforeAdd = QueueData.Instance.Count;
//Click Add Button and Add Part To Queue
testRunner.ClickByName("Queue Add Button", 2);
testRunner.Wait(2);
string queueItemPath = MatterControlUtilities.GetTestItemPath("Fennec_Fox.stl");
testRunner.Type(queueItemPath);
testRunner.Wait(1);
testRunner.Type("{Enter}");
//Make sure single part is added and queue count increases by one
bool fennecFoxPartWasAdded = testRunner.WaitForName("Queue Item " + "Fennec_Fox", 2);
resultsHarness.AddTestResult(fennecFoxPartWasAdded == true);
int queueCountAfterAdd = QueueData.Instance.Count;
resultsHarness.AddTestResult(queueCountBeforeAdd + 1 == queueCountAfterAdd);
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun);
Assert.IsTrue(testHarness.AllTestsPassed(2));
}
public void RaftEnabledPassedToSliceEngine()
{
// Run a copy of MatterControl
Action <AutomationTesterHarness> testToRun = (AutomationTesterHarness resultsHarness) =>
{
AutomationRunner testRunner = new AutomationRunner(MatterControlUtilities.DefaultTestImages);
{
MatterControlUtilities.PrepForTestRun(testRunner);
MatterControlUtilities.AddAndSelectPrinter(testRunner, "Airwolf 3D", "HD");
//Navigate to Local Library
testRunner.ClickByName("Library Tab");
MatterControlUtilities.NavigateToFolder(testRunner, "Local Library Row Item Collection");
testRunner.Wait(1);
testRunner.ClickByName("Row Item Calibration - Box");
testRunner.ClickByName("Row Item Calibration - Box Print Button");
testRunner.Wait(1);
testRunner.ClickByName("Layer View Tab");
testRunner.ClickByName("Bread Crumb Button Home", 1);
MatterControlUtilities.SwitchToAdvancedSettings(testRunner, resultsHarness);
testRunner.ClickByName("Raft / Priming Tab", 1);
testRunner.ClickByName("Create Raft Checkbox", 1);
testRunner.Wait(1.5);
testRunner.ClickByName("Generate Gcode Button", 1);
testRunner.Wait(5);
//Call compare slice settings methode here
resultsHarness.AddTestResult(MatterControlUtilities.CompareExpectedSliceSettingValueWithActualVaue("enableRaft", "True"));
MatterControlUtilities.CloseMatterControl(testRunner);
}
};
AutomationTesterHarness testHarness = MatterControlUtilities.RunTest(testToRun, overrideWidth: 1224, overrideHeight: 800);
Assert.IsTrue(testHarness.AllTestsPassed(3));
}
