override protected void SetupInterface()
{
maxsubdivisions = 512;
minsubdivisions = 3;
minpointscount = 3;
alwaysrendershapehints = true;
// Load stored settings
subdivisions = General.Clamp(General.Settings.ReadPluginSetting("drawellipsemode.subdivisions", 8), minsubdivisions, maxsubdivisions);
bevelwidth = General.Settings.ReadPluginSetting("drawellipsemode.bevelwidth", 0);
int angledeg = General.Settings.ReadPluginSetting("drawellipsemode.angle", 0);
angle = Angle2D.DegToRad(angledeg);
currentbevelwidth = bevelwidth;
//Add options docker
panel = new DrawEllipseOptionsPanel();
panel.MaxSubdivisions = maxsubdivisions;
panel.MinSubdivisions = minsubdivisions;
panel.MinSpikiness = (int)General.Map.FormatInterface.MinCoordinate;
panel.MaxSpikiness = (int)General.Map.FormatInterface.MaxCoordinate;
panel.Spikiness = bevelwidth;
panel.Angle = angledeg;
panel.Subdivisions = subdivisions;
panel.OnValueChanged += OptionsPanelOnValueChanged;
panel.OnContinuousDrawingChanged += OnContinuousDrawingChanged;
panel.OnShowGuidelinesChanged += OnShowGuidelinesChanged;
// Needs to be set after adding the OnContinuousDrawingChanged event...
panel.ContinuousDrawing = General.Settings.ReadPluginSetting("drawellipsemode.continuousdrawing", false);
panel.ShowGuidelines = General.Settings.ReadPluginSetting("drawellipsemode.showguidelines", false);
}
private void OptionsPanelOnValueChanged(object sender, EventArgs eventArgs)
{
bevelwidth = panel.Spikiness;
subdivisions = Math.Min(maxsubdivisions, panel.Subdivisions);
angle = Angle2D.DegToRad(panel.Angle);
Update();
}
//mxd
public void SetPitch(int newpitch)
{
BeforePropsChange();
pitch = General.ClampAngle(newpitch);
switch (rendermode)
{
case ThingRenderMode.MODEL:
double pmult = General.Map.Config.BuggyModelDefPitch ? 1 : -1;
ModelData md = General.Map.Data.ModeldefEntries[type];
if (md.InheritActorPitch || md.UseActorPitch)
{
pitchrad = Angle2D.DegToRad(pmult * (md.InheritActorPitch ? -pitch : pitch));
}
else
{
pitchrad = 0;
}
break;
case ThingRenderMode.FLATSPRITE:
pitchrad = Angle2D.DegToRad(pitch);
break;
default:
pitchrad = 0;
break;
}
if (type != General.Map.Config.Start3DModeThingType)
{
General.Map.IsChanged = true;
}
}
//mxd
public override void OnMouseDown(MouseEventArgs e)
{
base.OnMouseDown(e);
closestline = MapSet.NearestLinedef(selectedlines, mousedownmappos);
// Special cases...
int distance;
if(panel.FixedCurve)
{
if(panel.Angle > 0)
{
// Calculate diameter for current angle...
double ma = Angle2D.DegToRad(panel.Angle);
double d = (closestline.Length / Math.Tan(ma / 2f)) / 2;
double D = d / Math.Cos(ma / 2f);
distance = (int)Math.Round(D - d) * Math.Sign(panel.Distance);
}
else
{
distance = 0; // Special cases...
}
}
else
{
distance = panel.Distance;
}
// Store offset between intial mouse position and curve top
Vector2D perpendicular = closestline.Line.GetPerpendicular().GetNormal();
if(distance != 0) perpendicular *= distance; // Special cases...
Vector2D curvetop = closestline.GetCenterPoint() - perpendicular;
mousedownoffset = mousedownmappos - curvetop;
}
//mxd. merged from GZDoomEditing plugin
// This applies the given values on the vertices
private static void SetupSurfaceVertices(FlatVertex[] vertices, Sector s, ImageData img, Vector2D offset,
Vector2D scale, double rotate, int color, int light, bool absolute)
{
// Prepare for math!
rotate = Angle2D.DegToRad(rotate);
Vector2D texscale = new Vector2D(1.0f / img.ScaledWidth, 1.0f / img.ScaledHeight);
if (!absolute)
{
light = s.Brightness + light;
}
PixelColor lightcolor = PixelColor.FromInt(color);
PixelColor brightness = PixelColor.FromInt(General.Map.Renderer2D.CalculateBrightness(light));
PixelColor finalcolor = PixelColor.Modulate(lightcolor, brightness);
color = finalcolor.WithAlpha(255).ToInt();
// Do the math for all vertices
for (int i = 0; i < vertices.Length; i++)
{
Vector2D pos = new Vector2D(vertices[i].x, vertices[i].y);
pos = pos.GetRotated(rotate);
pos.y = -pos.y;
pos = (pos + offset) * scale * texscale;
vertices[i].u = (float)pos.x;
vertices[i].v = (float)pos.y;
vertices[i].c = color;
}
}
private void absrot_Validated(object sender, EventArgs e)
{
if(userinput)
{
float rad = Angle2D.DegToRad(absrot.GetResultFloat(this.absrotate));
mode.SetAbsRotation(rad);
}
}
// This performs an accurate test for object picking
public override bool PickAccurate(Vector3D from, Vector3D to, Vector3D dir, ref float u_ray)
{
u_ray = pickrayu;
// Check on which side of the nearest sidedef we are
Sidedef sd = MapSet.NearestSidedef(Sector.Sector.Sidedefs, pickintersect);
float side = sd.Line.SideOfLine(pickintersect);
//mxd. Alpha based picking. Used only on extrafloors with transparent or masked textures
if ((side <= 0.0f && sd.IsFront) || (side > 0.0f && !sd.IsFront))
{
if (!BuilderPlug.Me.AlphaBasedTextureHighlighting || !Texture.IsImageLoaded || extrafloor == null || RenderPass == RenderPass.Solid || (!Texture.IsTranslucent && !Texture.IsMasked))
{
return(true);
}
// Some textures (e.g. HiResImage) may lie about their size, so use bitmap size instead
Bitmap image = Texture.GetBitmap();
lock (image)
{
// Fetch ZDoom fields
float rotate = Angle2D.DegToRad(level.sector.Fields.GetValue("rotationfloor", 0.0f));
Vector2D offset = new Vector2D(level.sector.Fields.GetValue("xpanningfloor", 0.0f), level.sector.Fields.GetValue("ypanningfloor", 0.0f));
Vector2D scale = new Vector2D(level.sector.Fields.GetValue("xscalefloor", 1.0f), level.sector.Fields.GetValue("yscalefloor", 1.0f));
Vector2D texscale = new Vector2D(1.0f / Texture.ScaledWidth, 1.0f / Texture.ScaledHeight);
// Texture coordinates
Vector2D o = pickintersect;
o = o.GetRotated(rotate);
o.y = -o.y;
o = (o + offset) * scale * texscale;
o.x = (o.x * image.Width) % image.Width;
o.y = (o.y * image.Height) % image.Height;
// Make sure coordinates are inside of texture dimensions...
if (o.x < 0)
{
o.x += image.Width;
}
if (o.y < 0)
{
o.y += image.Height;
}
// Make final texture coordinates...
int ox = General.Clamp((int)Math.Floor(o.x), 0, image.Width - 1);
int oy = General.Clamp((int)Math.Floor(o.y), 0, image.Height - 1);
// Check pixel alpha
return(image.GetPixel(ox, oy).A > 0);
}
}
return(false);
}
//mxd. This checks if the thing has model override and whether pitch/roll values should be used
internal void UpdateCache()
{
if (General.Map.Data == null)
{
return;
}
// Check if the thing has model override
if (General.Map.Data.ModeldefEntries.ContainsKey(type))
{
ModelData md = General.Map.Data.ModeldefEntries[type];
if ((md.LoadState == ModelLoadState.None && General.Map.Data.ProcessModel(type)) || md.LoadState != ModelLoadState.None)
{
rendermode = (General.Map.Data.ModeldefEntries[type].IsVoxel ? ThingRenderMode.VOXEL : ThingRenderMode.MODEL);
}
}
else // reset rendermode if we SUDDENLY became a sprite out of a model. otherwise it crashes violently.
{
ThingTypeInfo ti = General.Map.Data.GetThingInfo(Type);
rendermode = (ti != null) ? ti.RenderMode : ThingRenderMode.NORMAL;
}
// Update radian versions of pitch and roll
switch (rendermode)
{
case ThingRenderMode.MODEL:
float pmult = General.Map.Config.BuggyModelDefPitch ? 1 : -1;
ModelData md = General.Map.Data.ModeldefEntries[type];
rollrad = (md.UseActorRoll ? Angle2D.DegToRad(roll) : 0);
pitchrad = ((md.InheritActorPitch || md.UseActorPitch) ? Angle2D.DegToRad(pmult * (md.InheritActorPitch ? -pitch : pitch)) : 0);
break;
case ThingRenderMode.FLATSPRITE:
rollrad = Angle2D.DegToRad(roll);
pitchrad = Angle2D.DegToRad(pitch);
break;
case ThingRenderMode.WALLSPRITE:
rollrad = Angle2D.DegToRad(roll);
pitchrad = 0;
break;
case ThingRenderMode.NORMAL:
rollrad = (rollsprite ? Angle2D.DegToRad(roll) : 0);
pitchrad = 0;
break;
case ThingRenderMode.VOXEL:
rollrad = 0;
pitchrad = 0;
break;
default: throw new NotImplementedException("Unknown ThingRenderMode");
}
}
//mxd
private void ChangeAngle(int increment)
{
PreAction(UndoGroup.AngleChange);
float incrementrad = Angle2D.DegToRad(increment);
List <IVisualEventReceiver> objs = GetSelectedObjects(true, false, true);
foreach (IVisualEventReceiver i in objs)
{
i.OnChangeTargetAngle(incrementrad);
}
PostAction();
}
//mxd
public void SetRoll(int newroll)
{
BeforePropsChange();
roll = General.ClampAngle(newroll);
rollrad = ((rollsprite || (rendermode == ThingRenderMode.MODEL && General.Map.Data.ModeldefEntries[type].UseActorRoll))
? Angle2D.DegToRad(roll) : 0);
if (type != General.Map.Config.Start3DModeThingType)
{
General.Map.IsChanged = true;
}
}
//mxd. This checks if the thing has model override and whether pitch/roll values should be used
internal void UpdateCache()
{
if (General.Map.Data == null)
{
return;
}
// Check if the thing has model override
if (General.Map.Data.ModeldefEntries.ContainsKey(type))
{
ModelData md = General.Map.Data.ModeldefEntries[type];
if ((md.LoadState == ModelLoadState.None && General.Map.Data.ProcessModel(type)) || md.LoadState != ModelLoadState.None)
{
rendermode = (General.Map.Data.ModeldefEntries[type].IsVoxel ? ThingRenderMode.VOXEL : ThingRenderMode.MODEL);
}
}
// Update radian versions of pitch and roll
switch (rendermode)
{
case ThingRenderMode.MODEL:
ModelData md = General.Map.Data.ModeldefEntries[type];
rollrad = (md.UseActorRoll ? Angle2D.DegToRad(roll) : 0);
pitchrad = ((md.InheritActorPitch || md.UseActorPitch) ? Angle2D.DegToRad(md.InheritActorPitch ? -pitch : pitch) : 0);
break;
case ThingRenderMode.FLATSPRITE:
rollrad = Angle2D.DegToRad(roll);
pitchrad = Angle2D.DegToRad(pitch);
break;
case ThingRenderMode.WALLSPRITE:
rollrad = Angle2D.DegToRad(roll);
pitchrad = 0;
break;
case ThingRenderMode.NORMAL:
rollrad = (rollsprite ? Angle2D.DegToRad(roll) : 0);
pitchrad = 0;
break;
case ThingRenderMode.VOXEL:
rollrad = 0;
pitchrad = 0;
break;
default: throw new NotImplementedException("Unknown ThingRenderMode");
}
}
// Constructor
internal Renderer3D(D3DDevice graphics) : base(graphics)
{
// Initialize
CreateProjection();
CreateMatrices2D();
SetupThingCage();
SetupTextures();
renderthingcages = true;
showselection = true;
showhighlight = true;
// Dummy frustum
frustum = new ProjectedFrustum2D(new Vector2D(), 0.0f, 0.0f, PROJ_NEAR_PLANE,
General.Settings.ViewDistance, Angle2D.DegToRad(General.Settings.VisualFOV));
}
// This creates matrices for a camera view
public void PositionAndLookAt(Vector3D pos, Vector3D lookat)
{
// Calculate delta vector
cameraposition = pos;
Vector3D delta = lookat - pos;
float anglexy = delta.GetAngleXY();
float anglez = delta.GetAngleZ();
// Create frustum
frustum = new ProjectedFrustum2D(pos, anglexy, anglez, PROJ_NEAR_PLANE,
General.Settings.ViewDistance, Angle2D.DegToRad(General.Settings.VisualFOV));
// Make the view matrix
view3d = Matrix.LookAtRH(D3DDevice.V3(pos), D3DDevice.V3(lookat), new Vector3(0f, 0f, 1f));
// Make the billboard matrix
billboard = Matrix.RotationZ(anglexy + Angle2D.PI);
}
// This creates the projection
internal void CreateProjection()
{
// Calculate aspect
float aspect = (float)General.Map.Graphics.RenderTarget.ClientSize.Width /
(float)General.Map.Graphics.RenderTarget.ClientSize.Height;
// The DirectX PerspectiveFovRH matrix method calculates the scaling in X and Y as follows:
// yscale = 1 / tan(fovY / 2)
// xscale = yscale / aspect
// The fov specified in the method is the FOV over Y, but we want the user to specify the FOV
// over X, so calculate what it would be over Y first;
float fov = Angle2D.DegToRad((float)General.Settings.VisualFOV);
float reversefov = 1.0f / (float)Math.Tan(fov / 2.0f);
float reversefovy = reversefov * aspect;
float fovy = (float)Math.Atan(1.0f / reversefovy) * 2.0f;
// Make the projection matrix
projection = Matrix.PerspectiveFovRH(fovy, aspect, PROJ_NEAR_PLANE, General.Settings.ViewDistance);
// Apply matrices
ApplyMatrices3D();
}
/*public DrawEllipseMode()
* {
* autoclosedrawing = false;
* }*/
#endregion
#region ================== Settings panel
override protected void SetupInterface()
{
maxsubdivisions = 512;
minsubdivisions = 3;
minpointscount = 3;
alwaysrendershapehints = true;
// Load stored settings
subdivisions = General.Clamp(General.Settings.ReadPluginSetting("drawellipsemode.subdivisions", 8), minsubdivisions, maxsubdivisions);
int angledeg = General.Settings.ReadPluginSetting("drawellipsemode.angle", 0);
angle = Angle2D.DegToRad(angledeg);
//currentbevelwidth = bevelwidth;
//Add options docker
panel = new DrawEllipseOptionsPanel();
panel.MaxSubdivisions = maxsubdivisions;
panel.MinSubdivisions = minsubdivisions;
panel.Angle = angledeg;
panel.Subdivisions = subdivisions;
panel.OnValueChanged += OptionsPanelOnValueChanged;
}
/// <summary>
/// Updates the arch with the values currently entered in the dialog
/// </summary>
private void UpdateArch()
{
double t = theta.GetResultFloat(originaltheta);
double o = offset.GetResultFloat(originaloffset);
double s = scale.GetResultFloat(originalscale * 100.0) / 100.0;
// Flip the scale if "down" is checked
if (!up.Checked)
{
s *= -1.0;
}
slopearcher.Theta = Angle2D.DegToRad(t);
slopearcher.OffsetAngle = Angle2D.DegToRad(o);
slopearcher.Scale = s;
slopearcher.HeightOffset = heightoffset.GetResultFloat(originalheightoffset);
slopearcher.ApplySlope();
// BaseVisualMode added a event handler to the dialog, so BaseVisualMode will update the geometry when we tell it to
UpdateChangedObjects?.Invoke(this, EventArgs.Empty);
}
// Redraw the control
private void AngleControl_Paint(object sender, PaintEventArgs e)
{
float rad = Angle2D.DegToRad((float)angle);
e.Graphics.PixelOffsetMode = PixelOffsetMode.HighQuality;
e.Graphics.InterpolationMode = InterpolationMode.High;
e.Graphics.SmoothingMode = SmoothingMode.HighQuality;
e.Graphics.Clear(this.BackColor);
Pen linepen = new Pen(SystemColors.ControlText, LINE_THICKNESS);
PointF start = new PointF((float)this.Size.Width * 0.5f, (float)this.Size.Height * 0.5f);
float line_length = (float)this.Size.Width * 0.26f;
if ((rad >= 0) && (rad < 360))
{
PointF end = new PointF(start.X + (float)Math.Sin(rad + Angle2D.PIHALF) * line_length,
start.Y + (float)Math.Cos(rad + Angle2D.PIHALF) * line_length);
e.Graphics.DrawLine(linepen, start, end);
}
else
{
e.Graphics.DrawLine(linepen, start, start);
}
}
// This makes sure we are updated with the source linedef information
public override void Update()
{
ThingData td = data.Mode.GetThingData(thing);
Thing t = thing;
// Floor slope thing
if (t.Type == 9502)
{
t.DetermineSector(data.Mode.BlockMap);
if (t.Sector != null)
{
//mxd. Vertex zheight overrides this effect
if (General.Map.UDMF && t.Sector.Sidedefs.Count == 3)
{
foreach (Sidedef side in t.Sector.Sidedefs)
{
if (!double.IsNaN(side.Line.Start.ZFloor) || !double.IsNaN(side.Line.End.ZFloor))
{
return;
}
}
}
double angle = Angle2D.DoomToReal((int)Angle2D.RadToDeg(t.Angle));
double vangle = Angle2D.DegToRad(General.Clamp(t.Args[0], 0, 180)); //mxd. Don't underestimate user stupidity (or curiosity)!
Vector2D point = new Vector2D(t.Position.x + Math.Cos(angle) * Math.Sin(vangle), t.Position.y + Math.Sin(angle) * Math.Sin(vangle));
Vector2D perpendicular = new Line2D(t.Position, point).GetPerpendicular();
Vector3D v1 = new Vector3D(t.Position.x, t.Position.y, t.Position.z + t.Sector.FloorHeight);
Vector3D v2 = new Vector3D(
point.x + perpendicular.x,
point.y + perpendicular.y,
t.Position.z + t.Sector.FloorHeight + Math.Cos(vangle)
);
Vector3D v3 = new Vector3D(
point.x - perpendicular.x,
point.y - perpendicular.y,
t.Position.z + t.Sector.FloorHeight + Math.Cos(vangle)
);
SectorData sd = data.Mode.GetSectorData(t.Sector);
sd.AddUpdateSector(data.Sector, true);
if (!sd.Updated)
{
sd.Update();
}
td.AddUpdateSector(t.Sector, true);
sd.Floor.plane = new Plane(v1, v2, v3, true);
}
}
// Ceiling slope thing
else if (t.Type == 9503)
{
t.DetermineSector(data.Mode.BlockMap);
if (t.Sector != null)
{
//mxd. Vertex zheight overrides this effect
if (General.Map.UDMF && t.Sector.Sidedefs.Count == 3)
{
foreach (Sidedef side in t.Sector.Sidedefs)
{
if (!double.IsNaN(side.Line.Start.ZCeiling) || !double.IsNaN(side.Line.End.ZCeiling))
{
return;
}
}
}
double angle = Angle2D.DoomToReal((int)Angle2D.RadToDeg(t.Angle));
double vangle = Angle2D.DegToRad(General.Clamp(t.Args[0], 0, 180)); //mxd. Don't underestimate user stupidity (or curiosity)!
Vector2D point = new Vector2D(t.Position.x + Math.Cos(angle) * Math.Sin(vangle), t.Position.y + Math.Sin(angle) * Math.Sin(vangle));
Vector2D perpendicular = new Line2D(t.Position, point).GetPerpendicular();
Vector3D v1 = new Vector3D(t.Position.x, t.Position.y, t.Position.z + t.Sector.CeilHeight);
Vector3D v2 = new Vector3D(
point.x + perpendicular.x,
point.y + perpendicular.y,
t.Position.z + t.Sector.CeilHeight + Math.Cos(vangle)
);
Vector3D v3 = new Vector3D(
point.x - perpendicular.x,
point.y - perpendicular.y,
t.Position.z + t.Sector.CeilHeight + Math.Cos(vangle)
);
SectorData sd = data.Mode.GetSectorData(t.Sector);
sd.AddUpdateSector(data.Sector, true);
if (!sd.Updated)
{
sd.Update();
}
td.AddUpdateSector(t.Sector, true);
sd.Ceiling.plane = new Plane(v1, v2, v3, false);
}
}
}
//mxd
public bool Setup(SectorLevel level, Effect3DFloor extrafloor, bool innerside)
{
Sector s = level.sector;
Vector2D texscale;
this.innerside = innerside;
base.Setup(level, extrafloor);
// Fetch ZDoom fields
float rotate = Angle2D.DegToRad(s.Fields.GetValue("rotationfloor", 0.0f));
Vector2D offset = new Vector2D(s.Fields.GetValue("xpanningfloor", 0.0f),
s.Fields.GetValue("ypanningfloor", 0.0f));
Vector2D scale = new Vector2D(s.Fields.GetValue("xscalefloor", 1.0f),
s.Fields.GetValue("yscalefloor", 1.0f));
//Load floor texture
if (s.LongFloorTexture != MapSet.EmptyLongName)
{
base.Texture = General.Map.Data.GetFlatImage(s.LongFloorTexture);
if (base.Texture == null || base.Texture is UnknownImage)
{
base.Texture = General.Map.Data.UnknownTexture3D;
setuponloadedtexture = s.LongFloorTexture;
}
else if (!base.Texture.IsImageLoaded)
{
setuponloadedtexture = s.LongFloorTexture;
}
}
else
{
// Use missing texture
base.Texture = General.Map.Data.MissingTexture3D;
setuponloadedtexture = 0;
}
// Determine texture scale
if (base.Texture.IsImageLoaded)
{
texscale = new Vector2D(1.0f / base.Texture.ScaledWidth, 1.0f / base.Texture.ScaledHeight);
}
else
{
texscale = new Vector2D(1.0f / 64.0f, 1.0f / 64.0f);
}
// Determine brightness
int color = PixelColor.FromInt(level.color).WithAlpha((byte)General.Clamp(level.alpha, 0, 255)).ToInt();
//mxd. Top extrafloor level should calculate fogdensity
//from the brightness of the level above it
int targetbrightness;
if (extrafloor != null && extrafloor.VavoomType && !level.disablelighting)
{
targetbrightness = 0;
SectorData sd = mode.GetSectorData(this.Sector.Sector);
for (int i = 0; i < sd.LightLevels.Count - 1; i++)
{
if (sd.LightLevels[i] == level)
{
targetbrightness = sd.LightLevels[i + 1].brightnessbelow;
break;
}
}
}
else
{
targetbrightness = level.brightnessbelow;
}
//mxd. Determine fog density
fogfactor = CalculateFogFactor(targetbrightness);
// Make vertices
ReadOnlyCollection <Vector2D> triverts = Sector.Sector.Triangles.Vertices;
WorldVertex[] verts = new WorldVertex[triverts.Count];
for (int i = 0; i < triverts.Count; i++)
{
// Color shading
verts[i].c = color; //mxd
// Vertex coordinates
verts[i].x = triverts[i].x;
verts[i].y = triverts[i].y;
verts[i].z = level.plane.GetZ(triverts[i]);
// Texture coordinates
Vector2D pos = triverts[i];
pos = pos.GetRotated(rotate);
pos.y = -pos.y;
pos = (pos + offset) * scale * texscale;
verts[i].u = pos.x;
verts[i].v = pos.y;
}
// The sector triangulation created clockwise triangles that
// are right up for the floor. For the ceiling we must flip
// the triangles upside down.
if ((extrafloor != null) && !extrafloor.VavoomType && !innerside)
{
SwapTriangleVertices(verts);
}
// Determine render pass
if (extrafloor != null)
{
if (extrafloor.Sloped3dFloor) //mxd
{
this.RenderPass = RenderPass.Mask;
}
else if (extrafloor.RenderAdditive) //mxd
{
this.RenderPass = RenderPass.Additive;
}
else if (level.alpha < 255)
{
this.RenderPass = RenderPass.Alpha;
}
else
{
this.RenderPass = RenderPass.Mask;
}
}
else
{
this.RenderPass = RenderPass.Solid;
}
//mxd. Update sky render flag
UpdateSkyRenderFlag();
// Apply vertices
base.SetVertices(verts);
return(verts.Length > 0);
}
/// <summary>
/// Exports the sectors to images
/// </summary>
public void Export()
{
Bitmap texturebitmap = null;
Bitmap brightmapbitmap = null;
Graphics gbrightmap = null;
Graphics gtexture = null;
Vector2D offset;
Vector2D size;
GetSizeAndOffset(out size, out offset);
// Normal texture
texturebitmap = new Bitmap((int)size.x, (int)size.y, settings.PixelFormat);
gtexture = Graphics.FromImage(texturebitmap);
gtexture.Clear(Color.Black); // If we don't clear to black we'll see seams where the sectors touch, due to the AA
gtexture.InterpolationMode = InterpolationMode.HighQualityBilinear;
gtexture.CompositingQuality = CompositingQuality.HighQuality;
gtexture.PixelOffsetMode = PixelOffsetMode.HighQuality;
gtexture.SmoothingMode = SmoothingMode.AntiAlias; // Without AA the sector edges will be quite rough
// Brightmap
if (settings.Brightmap)
{
brightmapbitmap = new Bitmap((int)size.x, (int)size.y, settings.PixelFormat);
gbrightmap = Graphics.FromImage(brightmapbitmap);
gbrightmap.Clear(Color.Black); // If we don't clear to black we'll see seams where the sectors touch, due to the AA
gbrightmap.InterpolationMode = InterpolationMode.HighQualityBilinear;
gbrightmap.CompositingQuality = CompositingQuality.HighQuality;
gbrightmap.PixelOffsetMode = PixelOffsetMode.HighQuality;
gbrightmap.SmoothingMode = SmoothingMode.AntiAlias; // Without AA the sector edges will be quite rough
}
foreach (Sector s in sectors)
{
GraphicsPath p = new GraphicsPath();
float rotation = (float)s.Fields.GetValue("rotationfloor", 0.0);
// If a sector is rotated any offset is on the rotated axes. But we need to offset by
// map coordinates. We'll use this vector to compute that offset
Vector2D rotationvector = Vector2D.FromAngle(Angle2D.DegToRad(rotation) + Angle2D.PIHALF);
// Sectors are triangulated, so draw every triangle
for (int i = 0; i < s.Triangles.Vertices.Count / 3; i++)
{
// The GDI image has the 0/0 coordinate in the top left, so invert the y component
Vector2D v1 = s.Triangles.Vertices[i * 3] - offset; v1.y *= -1.0;
Vector2D v2 = s.Triangles.Vertices[i * 3 + 1] - offset; v2.y *= -1.0;
Vector2D v3 = s.Triangles.Vertices[i * 3 + 2] - offset; v3.y *= -1.0;
p.AddLine((float)v1.x, (float)v1.y, (float)v2.x, (float)v2.y);
p.AddLine((float)v2.x, (float)v2.y, (float)v3.x, (float)v3.y);
p.CloseFigure();
}
Bitmap brushtexture;
if (settings.Floor)
{
brushtexture = General.Map.Data.GetFlatImage(s.FloorTexture).ExportBitmap();
}
else
{
brushtexture = General.Map.Data.GetFlatImage(s.CeilTexture).ExportBitmap();
}
if (!settings.Fullbright)
{
brushtexture = AdjustBrightness(brushtexture, s.Brightness > 0 ? s.Brightness / 255.0f : 0.0f);
}
Vector2D textureoffset = new Vector2D();
textureoffset.x = s.Fields.GetValue("xpanningfloor", 0.0);
textureoffset.y = s.Fields.GetValue("ypanningfloor", 0.0);
// Create the transformation matrix
Matrix matrix = new Matrix();
matrix.Rotate(rotation);
matrix.Translate((float)(-offset.x * rotationvector.x), (float)(offset.x * rotationvector.y)); // Left/right offset from the map origin
matrix.Translate((float)(offset.y * rotationvector.y), (float)(offset.y * rotationvector.x)); // Up/down offset from the map origin
matrix.Translate(-(float)textureoffset.x, -(float)textureoffset.y); // Texture offset
// Create the texture brush and apply the matrix
TextureBrush tbrush = new TextureBrush(brushtexture);
tbrush.Transform = matrix;
// Draw the islands of the sector
gtexture.FillPath(tbrush, p);
// Create the brightmap based on the sector brightness
if (settings.Brightmap)
{
SolidBrush sbrush = new SolidBrush(Color.FromArgb(255, s.Brightness, s.Brightness, s.Brightness));
gbrightmap.FillPath(sbrush, p);
}
}
// Finally save the image(s)
if (settings.Tiles)
{
SaveImageAsTiles(texturebitmap);
if (settings.Brightmap)
{
SaveImageAsTiles(brightmapbitmap, "_brightmap");
}
}
else
{
texturebitmap.Save(Path.Combine(settings.Path, settings.Name) + settings.Extension, settings.ImageFormat);
if (settings.Brightmap)
{
brightmapbitmap.Save(Path.Combine(settings.Path, settings.Name) + "_brightmap" + settings.Extension, settings.ImageFormat);
}
}
}
/// <summary>
/// This loads all nodes structures data from the lumps
/// </summary>
private bool LoadClassicStructures()
{
// Load the nodes structure
MemoryStream nodesstream = General.Map.GetLumpData("NODES");
int numnodes = (int)nodesstream.Length / 28;
//mxd. Boilerplate!
if (numnodes < 1)
{
// Cancel mode
MessageBox.Show("The map has only one subsector. Please add more sectors, then try running this mode again.", "THY NODETH ARETH BROKH!", MessageBoxButtons.OK, MessageBoxIcon.Error);
General.Editing.CancelMode();
return(false);
}
BinaryReader nodesreader = new BinaryReader(nodesstream);
nodes = new Node[numnodes];
for (int i = 0; i < nodes.Length; i++)
{
nodes[i].linestart.x = nodesreader.ReadInt16();
nodes[i].linestart.y = nodesreader.ReadInt16();
nodes[i].linedelta.x = nodesreader.ReadInt16();
nodes[i].linedelta.y = nodesreader.ReadInt16();
float top = nodesreader.ReadInt16();
float bot = nodesreader.ReadInt16();
float left = nodesreader.ReadInt16();
float right = nodesreader.ReadInt16();
nodes[i].rightbox = new RectangleF(left, top, (right - left), (bot - top));
top = nodesreader.ReadInt16();
bot = nodesreader.ReadInt16();
left = nodesreader.ReadInt16();
right = nodesreader.ReadInt16();
nodes[i].leftbox = new RectangleF(left, top, (right - left), (bot - top));
int rightindex = nodesreader.ReadInt16();
int leftindex = nodesreader.ReadInt16();
nodes[i].rightchild = rightindex & 0x7FFF;
nodes[i].leftchild = leftindex & 0x7FFF;
nodes[i].rightsubsector = (rightindex & 0x8000) != 0;
nodes[i].leftsubsector = (leftindex & 0x8000) != 0;
}
nodesreader.Close();
// Add additional properties to nodes
nodes[nodes.Length - 1].parent = -1;
SetupNodes(); //mxd
// Load the segs structure
MemoryStream segsstream = General.Map.GetLumpData("SEGS");
BinaryReader segsreader = new BinaryReader(segsstream);
int numsegs = (int)segsstream.Length / 12;
//mxd. Boilerplate!
if (numsegs < 1)
{
// Cancel mode
MessageBox.Show("The map has empty SEGS lump. Please rebuild the nodes, then try running this mode again.", "THY SEGS HATH SINNETH!", MessageBoxButtons.OK, MessageBoxIcon.Error);
General.Editing.CancelMode();
return(false);
}
//mxd. ZDoom SEGS overflow error
if (numsegs >= ushort.MaxValue)
{
// Cancel mode
MessageBox.Show("The map has too many SEGS (" + numsegs + "/" + ushort.MaxValue + ").\nIt won't load in Vanilla-style source ports\nand may not load in some enhanced source ports.", "THY SEGS ARETH WAAAY TOO PHAT!", MessageBoxButtons.OK, MessageBoxIcon.Error);
General.Editing.CancelMode();
return(false);
}
//mxd. Vanilla SEGS overflow warning
else if (numsegs >= short.MaxValue)
{
MessageBox.Show("The map has too many SEGS (" + numsegs + "/" + short.MaxValue + ").\nIt won't load in Vanilla-style source ports.", "THY SEGS ARETH TOO PHAT!", MessageBoxButtons.OK, MessageBoxIcon.Warning);
}
segs = new Seg[numsegs];
for (int i = 0; i < segs.Length; i++)
{
segs[i].startvertex = segsreader.ReadUInt16();
segs[i].endvertex = segsreader.ReadUInt16();
segs[i].angle = Angle2D.DegToRad(General.ClampAngle(segsreader.ReadInt16() / 182 + 90)); //mxd 182 == 65536 / 360;
segs[i].lineindex = segsreader.ReadUInt16();
segs[i].leftside = segsreader.ReadInt16() != 0;
segs[i].offset = segsreader.ReadInt16();
}
segsreader.Close();
// Load the vertexes structure
MemoryStream vertsstream = General.Map.GetLumpData("VERTEXES");
BinaryReader vertsreader = new BinaryReader(vertsstream);
int numverts = (int)vertsstream.Length / 4;
//mxd. Boilerplate!
if (numverts < 1)
{
// Cancel mode
MessageBox.Show("The map has empty VERTEXES lump. Please rebuild the nodes, then try running this mode again.", "THY VERTEXES ARETH FOUL!", MessageBoxButtons.OK, MessageBoxIcon.Error);
General.Editing.CancelMode();
return(false);
}
verts = new Vector2D[numverts];
for (int i = 0; i < verts.Length; i++)
{
verts[i].x = vertsreader.ReadInt16();
verts[i].y = vertsreader.ReadInt16();
}
vertsreader.Close();
// Load the subsectors structure
MemoryStream ssecstream = General.Map.GetLumpData("SSECTORS");
BinaryReader ssecreader = new BinaryReader(ssecstream);
int numssec = (int)ssecstream.Length / 4;
//mxd. Boilerplate!
if (numssec < 1)
{
// Cancel mode
MessageBox.Show("The map has empty SSECTORS lump. Please rebuild the nodes, then try running this mode again.", "THY SSECTORS ARETH HERETYSH!", MessageBoxButtons.OK, MessageBoxIcon.Error);
General.Editing.CancelMode();
return(false);
}
ssectors = new Subsector[numssec];
for (int i = 0; i < ssectors.Length; i++)
{
ssectors[i].numsegs = ssecreader.ReadUInt16(); //TECH: these are short in Doom, ushort in ZDoom/PRBoom+
ssectors[i].firstseg = ssecreader.ReadUInt16();
}
ssecreader.Close();
// Link all segs to their subsectors
for (int i = 0; i < ssectors.Length; i++)
{
int lastseg = ssectors[i].firstseg + ssectors[i].numsegs - 1;
for (int sg = ssectors[i].firstseg; sg <= lastseg; sg++)
{
segs[sg].ssector = i;
}
}
return(true);
}
// This returns the aligned and snapped draw position
public static DrawnVertex GetCurrentPosition(Vector2D mousemappos, bool snaptonearest, bool snaptogrid, bool snaptocardinal, bool usefourcardinaldirections, IRenderer2D renderer, List <DrawnVertex> points)
{
DrawnVertex p = new DrawnVertex();
p.stitch = true; //mxd. Setting these to false seems to be a good way to create invalid geometry...
p.stitchline = true; //mxd
snaptocardinal = (snaptocardinal && points.Count > 0); //mxd. Don't snap to cardinal when there are no points
//mxd. If snap to cardinal directions is enabled and we have points, modify mouse position
Vector2D vm, gridoffset;
if (snaptocardinal)
{
Vector2D offset = mousemappos - points[points.Count - 1].pos;
float angle;
if (usefourcardinaldirections)
{
angle = Angle2D.DegToRad((General.ClampAngle((int)Angle2D.RadToDeg(offset.GetAngle()))) / 90 * 90 + 45);
}
else
{
angle = Angle2D.DegToRad((General.ClampAngle((int)Angle2D.RadToDeg(offset.GetAngle()) + 22)) / 45 * 45);
}
offset = new Vector2D(0, -offset.GetLength()).GetRotated(angle);
vm = points[points.Count - 1].pos + offset;
//mxd. We need to be snapped relative to initial position
Vector2D prev = points[points.Count - 1].pos;
gridoffset = prev - General.Map.Grid.SnappedToGrid(prev);
}
else
{
vm = mousemappos;
gridoffset = new Vector2D();
}
float vrange = BuilderPlug.Me.StitchRange / renderer.Scale;
// Snap to nearest?
if (snaptonearest)
{
// Go for all drawn points
foreach (DrawnVertex v in points)
{
if (Vector2D.DistanceSq(vm, v.pos) < (vrange * vrange))
{
p.pos = v.pos;
return(p);
}
}
// Try the nearest vertex
Vertex nv = General.Map.Map.NearestVertexSquareRange(vm, vrange);
if (nv != null)
{
//mxd. Line angle must stay the same
if (snaptocardinal)
{
Line2D ourline = new Line2D(points[points.Count - 1].pos, vm);
if (Math.Round(ourline.GetSideOfLine(nv.Position), 1) == 0)
{
p.pos = nv.Position;
return(p);
}
}
else
{
p.pos = nv.Position;
return(p);
}
}
// Try the nearest linedef. mxd. We'll need much bigger stitch distance when snapping to cardinal directions
Linedef nl = General.Map.Map.NearestLinedefRange(vm, BuilderPlug.Me.StitchRange / renderer.Scale);
if (nl != null)
{
//mxd. Line angle must stay the same
if (snaptocardinal)
{
Line2D ourline = new Line2D(points[points.Count - 1].pos, vm);
Line2D nearestline = new Line2D(nl.Start.Position, nl.End.Position);
Vector2D intersection = Line2D.GetIntersectionPoint(nearestline, ourline, false);
if (!float.IsNaN(intersection.x))
{
// Intersection is on nearestline?
float u = Line2D.GetNearestOnLine(nearestline.v1, nearestline.v2, intersection);
if (u < 0f || u > 1f)
{
}
else
{
p.pos = new Vector2D((float)Math.Round(intersection.x, General.Map.FormatInterface.VertexDecimals),
(float)Math.Round(intersection.y, General.Map.FormatInterface.VertexDecimals));
return(p);
}
}
}
// Snap to grid?
else if (snaptogrid)
{
// Get grid intersection coordinates
List <Vector2D> coords = nl.GetGridIntersections(General.Map.Grid.GridRotate,
General.Map.Grid.GridOriginX, General.Map.Grid.GridOriginY);
// Find nearest grid intersection
bool found = false;
float found_distance = float.MaxValue;
Vector2D found_coord = new Vector2D();
foreach (Vector2D v in coords)
{
Vector2D delta = vm - v;
if (delta.GetLengthSq() < found_distance)
{
found_distance = delta.GetLengthSq();
found_coord = v;
found = true;
}
}
if (found)
{
// Align to the closest grid intersection
p.pos = found_coord;
return(p);
}
}
else
{
// Aligned to line
p.pos = nl.NearestOnLine(vm);
return(p);
}
}
}
else
{
// Always snap to the first drawn vertex so that the user can finish a complete sector without stitching
if (points.Count > 0)
{
if (Vector2D.DistanceSq(vm, points[0].pos) < (vrange * vrange))
{
p.pos = points[0].pos;
return(p);
}
}
}
// if the mouse cursor is outside the map bondaries check if the line between the last set point and the
// mouse cursor intersect any of the boundary lines. If it does, set the position to this intersection
if (points.Count > 0 &&
(mousemappos.x < General.Map.Config.LeftBoundary || mousemappos.x > General.Map.Config.RightBoundary ||
mousemappos.y > General.Map.Config.TopBoundary || mousemappos.y < General.Map.Config.BottomBoundary))
{
Line2D dline = new Line2D(mousemappos, points[points.Count - 1].pos);
bool foundintersection = false;
float u = 0.0f;
List <Line2D> blines = new List <Line2D>();
// lines for left, top, right and bottom boundaries
blines.Add(new Line2D(General.Map.Config.LeftBoundary, General.Map.Config.BottomBoundary, General.Map.Config.LeftBoundary, General.Map.Config.TopBoundary));
blines.Add(new Line2D(General.Map.Config.LeftBoundary, General.Map.Config.TopBoundary, General.Map.Config.RightBoundary, General.Map.Config.TopBoundary));
blines.Add(new Line2D(General.Map.Config.RightBoundary, General.Map.Config.TopBoundary, General.Map.Config.RightBoundary, General.Map.Config.BottomBoundary));
blines.Add(new Line2D(General.Map.Config.RightBoundary, General.Map.Config.BottomBoundary, General.Map.Config.LeftBoundary, General.Map.Config.BottomBoundary));
// check for intersections with boundaries
for (int i = 0; i < blines.Count; i++)
{
if (!foundintersection)
{
// only check for intersection if the last set point is not on the
// line we are checking against
if (blines[i].GetSideOfLine(points[points.Count - 1].pos) != 0.0f)
{
foundintersection = blines[i].GetIntersection(dline, out u);
}
}
}
// if there was no intersection set the position to the last set point
if (!foundintersection)
{
vm = points[points.Count - 1].pos;
}
else
{
vm = dline.GetCoordinatesAt(u);
}
}
// Snap to grid?
if (snaptogrid)
{
// Aligned to grid
p.pos = General.Map.Grid.SnappedToGrid(vm - gridoffset) + gridoffset;
// special handling
if (p.pos.x > General.Map.Config.RightBoundary)
{
p.pos.x = General.Map.Config.RightBoundary;
}
if (p.pos.y < General.Map.Config.BottomBoundary)
{
p.pos.y = General.Map.Config.BottomBoundary;
}
return(p);
}
else
{
// Normal position
p.pos.x = (float)Math.Round(vm.x); //mxd
p.pos.y = (float)Math.Round(vm.y); //mxd
return(p);
}
}
// This builds the geometry. Returns false when no geometry created.
public override bool Setup(SectorLevel level, Effect3DFloor extrafloor)
{
WorldVertex[] verts;
Sector s = level.sector;
Vector2D texscale;
base.Setup(level, extrafloor);
// Fetch ZDoom fields
float rotate = Angle2D.DegToRad(s.Fields.GetValue("rotationceiling", 0.0f));
Vector2D offset = new Vector2D(s.Fields.GetValue("xpanningceiling", 0.0f),
s.Fields.GetValue("ypanningceiling", 0.0f));
Vector2D scale = new Vector2D(s.Fields.GetValue("xscaleceiling", 1.0f),
s.Fields.GetValue("yscaleceiling", 1.0f));
// Load floor texture
base.Texture = General.Map.Data.GetFlatImage(s.LongCeilTexture);
if (base.Texture == null)
{
base.Texture = General.Map.Data.MissingTexture3D;
setuponloadedtexture = s.LongCeilTexture;
}
else
{
if (!base.Texture.IsImageLoaded)
{
setuponloadedtexture = s.LongCeilTexture;
}
}
// Determine texture scale
if (base.Texture.IsImageLoaded)
{
texscale = new Vector2D(1.0f / base.Texture.ScaledWidth, 1.0f / base.Texture.ScaledHeight);
}
else
{
texscale = new Vector2D(1.0f / 64.0f, 1.0f / 64.0f);
}
// Make vertices
ReadOnlyCollection <Vector2D> triverts = base.Sector.Sector.Triangles.Vertices;
verts = new WorldVertex[triverts.Count];
for (int i = 0; i < triverts.Count; i++)
{
// Color shading
PixelColor c = PixelColor.FromInt(level.color);
verts[i].c = c.WithAlpha((byte)General.Clamp(level.alpha, 0, 255)).ToInt();
// Vertex coordinates
verts[i].x = triverts[i].x;
verts[i].y = triverts[i].y;
verts[i].z = level.plane.GetZ(triverts[i]); //(float)s.CeilHeight;
// Texture coordinates
Vector2D pos = triverts[i];
pos = pos.GetRotated(rotate);
pos.y = -pos.y;
pos = (pos + offset) * scale * texscale;
verts[i].u = pos.x;
verts[i].v = pos.y;
}
// The sector triangulation created clockwise triangles that
// are right up for the floor. For the ceiling we must flip
// the triangles upside down.
if ((extrafloor == null) || extrafloor.VavoomType)
{
SwapTriangleVertices(verts);
}
// Determine render pass
if (extrafloor != null)
{
if (level.alpha < 255)
{
this.RenderPass = RenderPass.Alpha;
}
else
{
this.RenderPass = RenderPass.Mask;
}
}
else
{
this.RenderPass = RenderPass.Solid;
}
// Apply vertices
base.SetVertices(verts);
return(verts.Length > 0);
}
private void DecreaseAngle()
{
panel.Angle = General.ClampAngle(panel.Angle - 5);
angle = Angle2D.DegToRad(panel.Angle);
Update();
}
// Apply clicked
private void apply_Click(object sender, EventArgs e)
{
//mxd. Make Undo
MakeUndo();
List <string> defaultflags = new List <string>();
// Verify the tag
if (General.Map.FormatInterface.HasThingTag) //mxd
{
tagSelector.ValidateTag(); //mxd
if (((tagSelector.GetTag(0) < General.Map.FormatInterface.MinTag) || (tagSelector.GetTag(0) > General.Map.FormatInterface.MaxTag)))
{
General.ShowWarningMessage("Thing tag must be between " + General.Map.FormatInterface.MinTag + " and " + General.Map.FormatInterface.MaxTag + ".", MessageBoxButtons.OK);
return;
}
}
// Verify the type
if (!string.IsNullOrEmpty(thingtype.TypeStringValue) && ((thingtype.GetResult(0) < General.Map.FormatInterface.MinThingType) || (thingtype.GetResult(0) > General.Map.FormatInterface.MaxThingType)))
{
General.ShowWarningMessage("Thing type must be between " + General.Map.FormatInterface.MinThingType + " and " + General.Map.FormatInterface.MaxThingType + ".", MessageBoxButtons.OK);
return;
}
// Verify the action
if (General.Map.FormatInterface.HasThingAction && ((action.Value < General.Map.FormatInterface.MinAction) || (action.Value > General.Map.FormatInterface.MaxAction)))
{
General.ShowWarningMessage("Thing action must be between " + General.Map.FormatInterface.MinAction + " and " + General.Map.FormatInterface.MaxAction + ".", MessageBoxButtons.OK);
return;
}
// Go for all the things
int offset = 0; //mxd
foreach (Thing t in things)
{
// Coordination
//mxd. Randomize rotations?
if (cbrandomangle.Checked)
{
int newangle = General.Random(0, 359);
if (General.Map.Config.DoomThingRotationAngles)
{
newangle = newangle / 45 * 45;
}
t.Rotate(newangle);
}
if (cbrandompitch.Checked)
{
t.SetPitch(General.Random(0, 359));
}
if (cbrandomroll.Checked)
{
t.SetRoll(General.Random(0, 359));
}
//mxd. Check position
double px = General.Clamp(t.Position.x, General.Map.Config.LeftBoundary, General.Map.Config.RightBoundary);
double py = General.Clamp(t.Position.y, General.Map.Config.BottomBoundary, General.Map.Config.TopBoundary);
if (t.Position.x != px || t.Position.y != py)
{
t.Move(new Vector2D(px, py));
}
// Action/tags
t.Tag = General.Clamp(tagSelector.GetSmartTag(t.Tag, offset), General.Map.FormatInterface.MinTag, General.Map.FormatInterface.MaxTag); //mxd
if (!action.Empty)
{
t.Action = action.Value;
}
//mxd. Apply args
argscontrol.Apply(t, offset);
//mxd. Custom fields
fieldslist.Apply(t.Fields);
if (!string.IsNullOrEmpty(conversationID.Text))
{
UniFields.SetInteger(t.Fields, "conversation", conversationID.GetResult(t.Fields.GetValue("conversation", 0)), 0);
}
if (!string.IsNullOrEmpty(floatbobphase.Text))
{
UniFields.SetInteger(t.Fields, "floatbobphase", General.Clamp(floatbobphase.GetResult(t.Fields.GetValue("floatbobphase", -1)), -1, 63), -1);
}
if (!string.IsNullOrEmpty(gravity.Text))
{
UniFields.SetFloat(t.Fields, "gravity", gravity.GetResultFloat(t.Fields.GetValue("gravity", 1.0)), 1.0);
}
if (!string.IsNullOrEmpty(health.Text))
{
UniFields.SetInteger(t.Fields, "health", health.GetResult(t.Fields.GetValue("health", 1)), 1);
}
if (!string.IsNullOrEmpty(score.Text))
{
UniFields.SetInteger(t.Fields, "score", score.GetResult(t.Fields.GetValue("score", 0)), 0);
}
//mxd. User vars. Should be called after fieldslist.Apply()
ThingTypeInfo ti = General.Map.Data.GetThingInfoEx(t.Type);
if (ti != null && ti.Actor != null && ti.Actor.UserVars.Count > 0)
{
fieldslist.ApplyUserVars(ti.Actor.UserVars, t.Fields);
}
color.ApplyTo(t.Fields, t.Fields.GetValue("fillcolor", 0));
//mxd. Comments
commenteditor.Apply(t.Fields);
// Update settings
t.UpdateConfiguration();
//mxd. Increase offset...
offset++;
}
// Set as defaults
foreach (CheckBox c in flags.Checkboxes)
{
if (c.CheckState == CheckState.Checked)
{
defaultflags.Add(c.Tag.ToString());
}
}
General.Settings.DefaultThingType = thingtype.GetResult(General.Settings.DefaultThingType);
General.Settings.DefaultThingAngle = Angle2D.DegToRad((float)angle.GetResult((int)Angle2D.RadToDeg(General.Settings.DefaultThingAngle) - 90) + 90);
General.Settings.SetDefaultThingFlags(defaultflags);
// Done
General.Map.IsChanged = true;
if (OnValuesChanged != null)
{
OnValuesChanged(this, EventArgs.Empty); //mxd
}
this.DialogResult = DialogResult.OK;
this.Close();
}
// Apply clicked
private void apply_Click(object sender, EventArgs e)
{
MakeUndo();
List <string> defaultflags = new List <string>();
// Verify the tag
if (General.Map.FormatInterface.HasThingTag) //mxd
{
tagSelector.ValidateTag(); //mxd
if (((tagSelector.GetTag(0) < General.Map.FormatInterface.MinTag) || (tagSelector.GetTag(0) > General.Map.FormatInterface.MaxTag)))
{
General.ShowWarningMessage("Thing tag must be between " + General.Map.FormatInterface.MinTag + " and " + General.Map.FormatInterface.MaxTag + ".", MessageBoxButtons.OK);
return;
}
}
// Verify the type
if (!string.IsNullOrEmpty(thingtype.TypeStringValue) && ((thingtype.GetResult(0) < General.Map.FormatInterface.MinThingType) || (thingtype.GetResult(0) > General.Map.FormatInterface.MaxThingType)))
{
General.ShowWarningMessage("Thing type must be between " + General.Map.FormatInterface.MinThingType + " and " + General.Map.FormatInterface.MaxThingType + ".", MessageBoxButtons.OK);
return;
}
// Verify the action
if (General.Map.FormatInterface.HasThingAction && ((action.Value < General.Map.FormatInterface.MinAction) || (action.Value > General.Map.FormatInterface.MaxAction)))
{
General.ShowWarningMessage("Thing action must be between " + General.Map.FormatInterface.MinAction + " and " + General.Map.FormatInterface.MaxAction + ".", MessageBoxButtons.OK);
return;
}
// Go for all the things
int offset = 0; //mxd
foreach (Thing t in things)
{
// Coordination
if (cbRandomAngle.Checked) //mxd
{
int newangle = General.Random(0, 359);
if (General.Map.Config.DoomThingRotationAngles)
{
newangle = newangle / 45 * 45;
}
t.Rotate(newangle);
}
//mxd. Check position
float px = General.Clamp(t.Position.x, General.Map.Config.LeftBoundary, General.Map.Config.RightBoundary);
float py = General.Clamp(t.Position.y, General.Map.Config.BottomBoundary, General.Map.Config.TopBoundary);
if (t.Position.x != px || t.Position.y != py)
{
t.Move(new Vector2D(px, py));
}
// Apply all flags
foreach (CheckBox c in flags.Checkboxes)
{
switch (c.CheckState)
{
case CheckState.Checked: t.SetFlag(c.Tag.ToString(), true); break;
case CheckState.Unchecked: t.SetFlag(c.Tag.ToString(), false); break;
}
}
// Action/tags
t.Tag = General.Clamp(tagSelector.GetSmartTag(t.Tag, offset), General.Map.FormatInterface.MinTag, General.Map.FormatInterface.MaxTag); //mxd
if (!action.Empty)
{
t.Action = action.Value;
}
//mxd. Apply args
argscontrol.Apply(t, offset);
// Update settings
t.UpdateConfiguration();
//mxd. Increase offset...
offset++;
}
// Set as defaults
foreach (CheckBox c in flags.Checkboxes)
{
if (c.CheckState == CheckState.Checked)
{
defaultflags.Add(c.Tag.ToString());
}
}
General.Settings.DefaultThingType = thingtype.GetResult(General.Settings.DefaultThingType);
General.Settings.DefaultThingAngle = Angle2D.DegToRad((float)angle.GetResult((int)Angle2D.RadToDeg(General.Settings.DefaultThingAngle) - 90) + 90);
General.Settings.SetDefaultThingFlags(defaultflags);
// Done
General.Map.IsChanged = true;
if (OnValuesChanged != null)
{
OnValuesChanged(this, EventArgs.Empty); //mxd
}
this.DialogResult = DialogResult.OK;
this.Close();
}
//mxd
protected void AlignTextureToSlopeLine(Linedef slopeSource, float slopeAngle, bool isFront, bool alignx, bool aligny)
{
bool isFloor = (geometrytype == VisualGeometryType.FLOOR);
Sector.Sector.Fields.BeforeFieldsChange();
float sourceAngle = (float)Math.Round(General.ClampAngle(isFront ? -Angle2D.RadToDeg(slopeSource.Angle) + 90 : -Angle2D.RadToDeg(slopeSource.Angle) - 90), 1);
if (isFloor)
{
if ((isFront && slopeSource.Front.Sector.FloorHeight > slopeSource.Back.Sector.FloorHeight) ||
(!isFront && slopeSource.Front.Sector.FloorHeight < slopeSource.Back.Sector.FloorHeight))
{
sourceAngle = General.ClampAngle(sourceAngle + 180);
}
}
else
{
if ((isFront && slopeSource.Front.Sector.CeilHeight < slopeSource.Back.Sector.CeilHeight) ||
(!isFront && slopeSource.Front.Sector.CeilHeight > slopeSource.Back.Sector.CeilHeight))
{
sourceAngle = General.ClampAngle(sourceAngle + 180);
}
}
//update angle
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "rotationfloor" : "rotationceiling"), sourceAngle, 0f);
//update scaleY
string xScaleKey = (isFloor ? "xscalefloor" : "xscaleceiling");
string yScaleKey = (isFloor ? "yscalefloor" : "yscaleceiling");
float scaleX = Sector.Sector.Fields.GetValue(xScaleKey, 1.0f);
float scaleY;
//set scale
if (aligny)
{
scaleY = (float)Math.Round(scaleX * (1 / (float)Math.Cos(slopeAngle)), 2);
UniFields.SetFloat(Sector.Sector.Fields, yScaleKey, scaleY, 1.0f);
}
else
{
scaleY = Sector.Sector.Fields.GetValue(yScaleKey, 1.0f);
}
//update texture offsets
Vector2D offset;
if (isFloor)
{
if ((isFront && slopeSource.Front.Sector.FloorHeight < slopeSource.Back.Sector.FloorHeight) ||
(!isFront && slopeSource.Front.Sector.FloorHeight > slopeSource.Back.Sector.FloorHeight))
{
offset = slopeSource.End.Position;
}
else
{
offset = slopeSource.Start.Position;
}
}
else
{
if ((isFront && slopeSource.Front.Sector.CeilHeight > slopeSource.Back.Sector.CeilHeight) ||
(!isFront && slopeSource.Front.Sector.CeilHeight < slopeSource.Back.Sector.CeilHeight))
{
offset = slopeSource.End.Position;
}
else
{
offset = slopeSource.Start.Position;
}
}
offset = offset.GetRotated(Angle2D.DegToRad(sourceAngle));
if (alignx)
{
if (Texture != null && Texture.IsImageLoaded)
{
offset.x %= Texture.Width / scaleX;
}
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "xpanningfloor" : "xpanningceiling"), (float)Math.Round(-offset.x), 0f);
}
if (aligny)
{
if (Texture != null && Texture.IsImageLoaded)
{
offset.y %= Texture.Height / scaleY;
}
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "ypanningfloor" : "ypanningceiling"), (float)Math.Round(offset.y), 0f);
}
//update geometry
Sector.UpdateSectorGeometry(false);
}
//mxd
protected void AlignTextureToClosestLine(bool alignx, bool aligny)
{
if (!(mode.HighlightedObject is BaseVisualSector))
{
return;
}
// Do we need to align this? (and also grab texture scale while we are at it)
float scaleX, scaleY;
bool isFloor = (geometrytype == VisualGeometryType.FLOOR);
if (mode.HighlightedTarget is VisualFloor)
{
VisualFloor target = (VisualFloor)mode.HighlightedTarget;
// Check texture
if (target.Sector.Sector.FloorTexture != (isFloor ? Sector.Sector.FloorTexture : Sector.Sector.CeilTexture))
{
return;
}
scaleX = target.Sector.Sector.Fields.GetValue("xscalefloor", 1.0f);
scaleY = target.Sector.Sector.Fields.GetValue("yscalefloor", 1.0f);
}
else
{
VisualCeiling target = (VisualCeiling)mode.HighlightedTarget;
// Check texture
if (target.Sector.Sector.CeilTexture != (isFloor ? Sector.Sector.FloorTexture : Sector.Sector.CeilTexture))
{
return;
}
scaleX = target.Sector.Sector.Fields.GetValue("xscaleceiling", 1.0f);
scaleY = target.Sector.Sector.Fields.GetValue("yscaleceiling", 1.0f);
}
//find a linedef to align to
Vector2D hitpos = mode.GetHitPosition();
if (!hitpos.IsFinite())
{
return;
}
//align to line of highlighted sector, which is closest to hitpos
Sector highlightedSector = ((BaseVisualSector)mode.HighlightedObject).Sector;
List <Linedef> lines = new List <Linedef>();
foreach (Sidedef side in highlightedSector.Sidedefs)
{
lines.Add(side.Line);
}
Linedef targetLine = MapSet.NearestLinedef(lines, hitpos);
if (targetLine == null)
{
return;
}
bool isFront = targetLine.SideOfLine(hitpos) > 0;
Sector.Sector.Fields.BeforeFieldsChange();
//find an angle to rotate texture
float sourceAngle = (float)Math.Round(General.ClampAngle(isFront ? -Angle2D.RadToDeg(targetLine.Angle) + 90 : -Angle2D.RadToDeg(targetLine.Angle) - 90), 1);
if (!isFront)
{
sourceAngle = General.ClampAngle(sourceAngle + 180);
}
//update angle
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "rotationfloor" : "rotationceiling"), sourceAngle, 0f);
//set scale
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "xscalefloor" : "xscaleceiling"), scaleX, 1.0f);
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "yscalefloor" : "yscaleceiling"), scaleY, 1.0f);
//update offset
float distToStart = Vector2D.Distance(hitpos, targetLine.Start.Position);
float distToEnd = Vector2D.Distance(hitpos, targetLine.End.Position);
Vector2D offset = (distToStart < distToEnd ? targetLine.Start.Position : targetLine.End.Position).GetRotated(Angle2D.DegToRad(sourceAngle));
if (alignx)
{
if (Texture != null && Texture.IsImageLoaded)
{
offset.x %= Texture.Width / scaleX;
}
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "xpanningfloor" : "xpanningceiling"), (float)Math.Round(-offset.x), 0f);
}
if (aligny)
{
if (Texture != null && Texture.IsImageLoaded)
{
offset.y %= Texture.Height / scaleY;
}
UniFields.SetFloat(Sector.Sector.Fields, (isFloor ? "ypanningfloor" : "ypanningceiling"), (float)Math.Round(offset.y), 0f);
}
//update geometry
Sector.UpdateSectorGeometry(false);
}
// This is called to update UV dragging
protected virtual void UpdateDragUV()
{
float u_ray = 1.0f;
// Calculate intersection position
this.Level.plane.GetIntersection(General.Map.VisualCamera.Position, General.Map.VisualCamera.Target, ref u_ray);
Vector3D intersect = General.Map.VisualCamera.Position + (General.Map.VisualCamera.Target - General.Map.VisualCamera.Position) * u_ray;
// Calculate offsets
Vector3D dragdelta = intersect - dragorigin;
float offsetx = dragdelta.x;
float offsety = dragdelta.y;
bool lockX = General.Interface.CtrlState && !General.Interface.ShiftState;
bool lockY = !General.Interface.CtrlState && General.Interface.ShiftState;
if (lockX || lockY)
{
float camAngle = Angle2D.RadToDeg(General.Map.VisualCamera.AngleXY);
if (camAngle > 315 || camAngle < 46)
{
if (lockX)
{
offsetx = 0;
}
if (lockY)
{
offsety = 0;
}
}
else if (camAngle > 225)
{
if (lockX)
{
offsety = 0;
}
if (lockY)
{
offsetx = 0;
}
}
else if (camAngle > 135)
{
if (lockX)
{
offsetx = 0;
}
if (lockY)
{
offsety = 0;
}
}
else
{
if (lockX)
{
offsety = 0;
}
if (lockY)
{
offsetx = 0;
}
}
}
//mxd. Modify offsets based on surface and camera angles
float angle;
if (GeometryType == VisualGeometryType.CEILING)
{
angle = Angle2D.DegToRad(level.sector.Fields.GetValue("rotationceiling", 0f));
}
else
{
angle = Angle2D.DegToRad(level.sector.Fields.GetValue("rotationfloor", 0f));
}
Vector2D v = new Vector2D(offsetx, offsety).GetRotated(angle);
offsetx = (int)Math.Round(v.x);
offsety = (int)Math.Round(v.y);
// Calculate deltas
int deltax, deltay;
if (General.Interface.CtrlState && General.Interface.ShiftState)
{
//mxd. Clamp to grid size?
int newoffsetx = startoffsetx - (int)Math.Round(offsetx);
int newoffsety = startoffsety + (int)Math.Round(offsety);
deltax = prevoffsetx - newoffsetx;
deltay = prevoffsety - newoffsety;
if (Math.Abs(deltax) >= General.Map.Grid.GridSize)
{
deltax = General.Map.Grid.GridSize * Math.Sign(deltax);
prevoffsetx = newoffsetx;
}
else
{
deltax = 0;
}
if (Math.Abs(deltay) >= General.Map.Grid.GridSize)
{
deltay = General.Map.Grid.GridSize * Math.Sign(deltay);
prevoffsety = newoffsety;
}
else
{
deltay = 0;
}
}
else
{
int newoffsetx = startoffsetx - (int)Math.Round(offsetx);
int newoffsety = startoffsety + (int)Math.Round(offsety);
deltax = prevoffsetx - newoffsetx;
deltay = prevoffsety - newoffsety;
prevoffsetx = newoffsetx;
prevoffsety = newoffsety;
}
//mxd. Apply offset?
if (deltax != 0 || deltay != 0)
{
mode.ApplyFlatOffsetChange(deltax, deltay);
}
mode.ShowTargetInfo();
}
// Apply clicked
private void apply_Click(object sender, EventArgs e)
{
List <string> defaultflags = new List <string>();
string undodesc = "thing";
// Verify the tag
if (General.Map.FormatInterface.HasThingTag && ((tag.GetResult(0) < General.Map.FormatInterface.MinTag) || (tag.GetResult(0) > General.Map.FormatInterface.MaxTag)))
{
General.ShowWarningMessage("Thing tag must be between " + General.Map.FormatInterface.MinTag + " and " + General.Map.FormatInterface.MaxTag + ".", MessageBoxButtons.OK);
return;
}
// Verify the type
if (((thingtype.GetResult(0) < General.Map.FormatInterface.MinThingType) || (thingtype.GetResult(0) > General.Map.FormatInterface.MaxThingType)))
{
General.ShowWarningMessage("Thing type must be between " + General.Map.FormatInterface.MinThingType + " and " + General.Map.FormatInterface.MaxThingType + ".", MessageBoxButtons.OK);
return;
}
// Verify the action
if (General.Map.FormatInterface.HasThingAction && ((action.Value < General.Map.FormatInterface.MinAction) || (action.Value > General.Map.FormatInterface.MaxAction)))
{
General.ShowWarningMessage("Thing action must be between " + General.Map.FormatInterface.MinAction + " and " + General.Map.FormatInterface.MaxAction + ".", MessageBoxButtons.OK);
return;
}
// Make undo
if (things.Count > 1)
{
undodesc = things.Count + " things";
}
General.Map.UndoRedo.CreateUndo("Edit " + undodesc);
// Go for all the things
foreach (Thing t in things)
{
// Thing type index
t.Type = General.Clamp(thingtype.GetResult(t.Type), General.Map.FormatInterface.MinThingType, General.Map.FormatInterface.MaxThingType);
// Coordination
t.Rotate(angle.GetResult(t.AngleDoom));
t.Move(t.Position.x, t.Position.y, (float)height.GetResult((int)t.Position.z));
// Apply all flags
foreach (CheckBox c in flags.Checkboxes)
{
if (c.CheckState == CheckState.Checked)
{
t.SetFlag(c.Tag.ToString(), true);
}
else if (c.CheckState == CheckState.Unchecked)
{
t.SetFlag(c.Tag.ToString(), false);
}
}
// Action/tags
t.Tag = tag.GetResult(t.Tag);
if (!action.Empty)
{
t.Action = action.Value;
}
t.Args[0] = arg0.GetResult(t.Args[0]);
t.Args[1] = arg1.GetResult(t.Args[1]);
t.Args[2] = arg2.GetResult(t.Args[2]);
t.Args[3] = arg3.GetResult(t.Args[3]);
t.Args[4] = arg4.GetResult(t.Args[4]);
// Custom fields
fieldslist.Apply(t.Fields);
// Update settings
t.UpdateConfiguration();
}
// Set as defaults
foreach (CheckBox c in flags.Checkboxes)
{
if (c.CheckState == CheckState.Checked)
{
defaultflags.Add(c.Tag.ToString());
}
}
General.Settings.DefaultThingType = thingtype.GetResult(General.Settings.DefaultThingType);
General.Settings.DefaultThingAngle = Angle2D.DegToRad((float)angle.GetResult((int)Angle2D.RadToDeg(General.Settings.DefaultThingAngle) - 90) + 90);
General.Settings.SetDefaultThingFlags(defaultflags);
// Done
General.Map.IsChanged = true;
Cleanup();
this.DialogResult = DialogResult.OK;
this.Close();
}
