private void hslButton3_Click(object sender, EventArgs e)
{
COMconfig conf;
conf.botelv = "9600";
conf.zhanhao = "1";
conf.shujuwei = "8";
conf.tingzhiwei = "1";
conf.dataFromZero = true;
conf.stringReverse = false;
conf.COM_Name = "COM11";
conf.checkInfo = 0;
mr = new M_485Rtu(conf);
mr.connect();
}
private void Form1_Load(object sender, EventArgs e)
{
bpqCOMConf.botelv = "19200";
bpqCOMConf.zhanhao = "2";//站号
bpqCOMConf.shujuwei = "8";
bpqCOMConf.tingzhiwei = "1";
bpqCOMConf.dataFromZero = true;
bpqCOMConf.stringReverse = false;
bpqCOMConf.COM_Name = "COM11";
bpqCOMConf.checkInfo = 2;
bpqMR = new M_485Rtu(bpqCOMConf);
bpqMR.connect();//变频器串口连接
pushedFlag = false;
startFlag = false;
pushFlag = false;
maxHammer = -1;
maxPressure = -1;
c = new config();
c.channelCount = 4;//开启通道个数
//通道0 压力 pressure
//通道1 水冲击力 waterHammer
//通道2 温度
//通道3 变频器返回值
//通道4 流量
c.convertClkRate = 1000;//每个通道的时钟频率
c.deviceDescription = "PCI-1710HG,BID#0";
c.profilePath = "D:/demo.xml";
c.sectionCount = 0; //The 0 means setting 'streaming' mode.
c.sectionLength = 1000; //每个通道的缓冲区长度
c.startChannel = 0;
//初始化研华板卡的功能
daq = new DAQ_profile(0, c);
daq.InstantAo();
daq.InstantDi();
daq.InstantDo();
doData = new byte[2] {
0x00, 0x00
};
daq.InstantDo_Write(doData);
bpqzt.Text = "变频器当前状态：变频";
sbzt.Text = "水泵当前状态：";
sbyali.Value = Properties.Settings.Default.水泵压力;
try
{
numericUpDown1.Value = Properties.Settings.Default.保持时间;
startThreshold.Value = Properties.Settings.Default.开始计时阈值;
stopThreshold.Value = Properties.Settings.Default.停止阈值;
}
catch { }
hslCurve1.SetLeftCurve("压力", null, Color.DodgerBlue);
hslCurve1.SetLeftCurve("冲击力", null, Color.DarkOrange);
hslCurve1.ValueMaxLeft = 10;
hslCurve1.ValueMaxRight = 10;
hslCurve1.StrechDataCountMax = 1000;//设置显示数据量
//hslCurve1.IsAbscissaStrech = true;//这是数据全部显示
BindingSource bs = new BindingSource();
bs.DataSource = dt;
monitor = new System.Timers.Timer(500);
monitor.Elapsed += new System.Timers.ElapsedEventHandler(theout); //到达时间的时候执行事件；
monitor.AutoReset = true; //设置是执行一次（false）还是一直执行(true)；
monitor.Enabled = true; //是否执行System.Timers.Timer.Elapsed事件；
pushWork = new System.Timers.Timer(1);
pushWork.Elapsed += new System.Timers.ElapsedEventHandler(pushWorkThread); //到达时间的时候执行事件；
pushWork.AutoReset = false; //设置是执行一次（false）还是一直执行(true)；
dt.Columns.Add("时间", typeof(string));
dt.Columns.Add("压力", typeof(double)); //新建第一列
dt.Columns.Add("冲击力", typeof(double)); //新建第二列
dt.Columns.Add("温度", typeof(double));
WaveformAi();
waveformAiCtrl1_Start();
}
private void Form2_Load(object sender, EventArgs e)
{
//ti=new System.Threading.Timer(new TimerCallback(timer_Elapsed), null, 1000*10, 2000);
first6l = true;
firstadd0 = true;
first9l = true;
conf.botelv = "19200";
conf.zhanhao = "1";
conf.shujuwei = "8";
conf.tingzhiwei = "1";
conf.dataFromZero = true;
conf.stringReverse = false;
conf.COM_Name = "COM11";
conf.checkInfo = 2;
mr = new M_485Rtu(conf);
mr.connect();
mr.write_coil("10", true, 1);//停止累计流量
//MessageBox.Show("485连接成功");
maxFlow = -1;
pushedFlag = false;
loadDataFlag = false;
c = new config();
//c.channelCount = 3;
c.convertClkRate = 100;
c.deviceDescription = "PCI-1710HG,BID#0";
//c.deviceDescription = "DemoDevice,BID#0";
//c.profilePath = "D:/demo.xml";
c.sectionCount = 0;//The 0 means setting 'streaming' mode.
c.sectionLength = 100;
c.startChannel = 0;
//初始化研华板卡的功能
daq = new DAQ_profile(4, c);
daq.InstantAo();
daq.InstantDi();
daq.InstantDo();
doData = new byte[2] {
0x00, 0x00
};
daq.InstantDo_Write(doData);
l = new List <double>();
l.Clear();
wendu = new List <double>();
wendu.Clear();
//dp.Enabled = true;
//bp.Enabled = false;
bpqzt.Text = "变频器当前状态：变频";
//sbzt.Text = "水泵当前状态：关闭";
try
{
sbyali.Value = Properties.Settings.Default.水泵压力;
numericUpDown1.Value = Properties.Settings.Default.保持时间;
startThreshold.Value = Properties.Settings.Default.开始计时阈值;
stopThreshold.Value = Properties.Settings.Default.停止阈值;
qmin.Value = Properties.Settings.Default.qmin;
}
catch { }
doData = new byte[2] {
0x00, 0x00
};
hslCurve1.SetLeftCurve("流量", null, Color.DodgerBlue); //流量
hslCurve1.SetRightCurve("温度", null, Color.DarkOrange); //温度
hslCurve1.ValueMaxLeft = 10;
hslCurve1.ValueMaxRight = 50;
hslCurve1.StrechDataCountMax = 300; //设置显示数据量
hslCurve1.IsAbscissaStrech = true; //这是数据全部显示
dt = new DataTable();
dt.Columns.Add("时间", typeof(string));
dt.Columns.Add("温度", typeof(double)); //新建第一列
dt.Columns.Add("流量", typeof(double)); //新建第二列 ElapsedEventHandler
//t = new System.Timers.Timer(100);
//t.Elapsed += new System.Timers.(theout);//到达时间的时候执行事件；
//t.AutoReset = true;//设置是执行一次（false）还是一直执行(true)；
//t.Enabled = false;
daq.InstantAi();
t2 = new System.Threading.Timer(new TimerCallback(theout), null, 200, 110);
//monitor = new System.Timers.Timer(500);
//monitor.Elapsed += new System.Timers.ElapsedEventHandler(monitorAction);//到达时间的时候执行事件；
//monitor.AutoReset = true;//设置是执行一次（false）还是一直执行(true)；
//monitor.Enabled = false;//是否执行System.Timers.Timer.Elapsed事件；
//monitor2 = new System.Threading.Timer(new TimerCallback(monitorAction), null, 0, 1000);
//pushWork = new System.Timers.Timer(10);
//pushWork.Elapsed += new System.Timers.ElapsedEventHandler(pushWorkThread);//到达时间的时候执行事件；
//pushWork.AutoReset = false;//设置是执行一次（false）还是一直执行(true)；
DateTime tt = DateTime.Now;
maxFlow = -1;
//hslCurve1.RemoveAllCurveData();
//dt.Clear();
//l.Clear();
//wendu.Clear();
l.Add(0);//绘图从零点开始
dt.Rows.Add(tt.ToString("yyyy-MM-dd hh:mm:ss:fff"), TEMP, 0);
pushedFlag = false;
first6l = true;
first9l = true;
//t.Start();
}