public MainWindowViewModel()
{
_client = new ServiceClient();
_joystickState = new vJoy.JoystickState();
/* Before it we should check if service is available */
if ((JoyCapabilities = _client.ConnectJoystick()).JoyId != 0)
{
JoyVM = new JoyVM();
JoyVM.PropertyChanged += JoyVM_PropertyChanged;
}
}
public void InformNewWiimoteState(WiimoteLib.WiimoteState ws)
{
// make a report
vJoy.JoystickState iReport = new vJoy.JoystickState();
// specify device
iReport.bDevice = (byte)wrappedJoystickId;
// now position data:
iReport.AxisX = RescaleAxis(-ws.AccelState.Values.Y, Xmax);
iReport.AxisY = RescaleAxis(ws.AccelState.Values.X, Ymax);
iReport.AxisZ = RescaleAxis(ws.AccelState.Values.Z, Zmax);
// now buttons
iReport.Buttons = WiimoteToUint(ws);
wrappedJoystick.UpdateVJD(wrappedJoystickId, ref iReport);
}
//initializer
public JoyControl()
{
joystick = new vJoy();
iReport = new vJoy.JoystickState();
if (!joystick.vJoyEnabled())
{
sta="vJoy driver not enabled: Failed Getting vJoy attributes.";
return;
}
else
sta= "Vendor: " + joystick.GetvJoyManufacturerString() + "\nProduct :" + joystick.GetvJoyProductString() + "\nVersion Number:" + joystick.GetvJoySerialNumberString();
iReport.AxisXRot = 16500;
iReport.AxisYRot = 16500;
iReport.AxisZRot = 16500;
iReport.AxisX = 16500;
iReport.AxisY = 16500;
iReport.AxisZ = 16500;
if (!joystick.UpdateVJD(id, ref iReport))
{
joystick.AcquireVJD(id);
}
}
static void Main(string[] args)
{
try
{
joystick = new vJoy();
iReport = new vJoy.JoystickState();
}
catch
{
Console.ForegroundColor = ConsoleColor.Red;
Console.WriteLine("vJoy error,please reinstall vjoy.");
return;
}
if (!joystick.vJoyEnabled())
{
Console.ForegroundColor = ConsoleColor.Red;
Console.WriteLine("vJoy driver not enabled: Failed Getting vJoy attributes.\n");
return;
}
// Get the state of the requested device
VjdStat status = joystick.GetVJDStatus(id);
switch (status)
{
case VjdStat.VJD_STAT_OWN:
Console.WriteLine("vJoy Device {0} is already owned by this feeder\n", id);
break;
case VjdStat.VJD_STAT_FREE:
Console.WriteLine("vJoy Device {0} is free\n", id);
break;
case VjdStat.VJD_STAT_BUSY:
Console.ForegroundColor = ConsoleColor.Red;
Console.WriteLine("vJoy Device {0} is already owned by another feeder\nCannot continue\n", id);
return;
case VjdStat.VJD_STAT_MISS:
Console.ForegroundColor = ConsoleColor.Red;
Console.WriteLine("vJoy Device {0} is not installed or disabled\nCannot continue\n", id);
return;
default:
Console.ForegroundColor = ConsoleColor.Red;
Console.WriteLine("vJoy Device {0} general error\nCannot continue\n", id);
return;
};
// Check which axes are supported
bool AxisX = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_X);
bool AxisY = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_Y);
bool AxisZ = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_Z);
bool AxisRX = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_RX);
bool AxisRY = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_RX);
bool AxisRZ = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_RZ);
bool AxisSL0 = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_SL0);
bool AxisSL1 = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_SL1);
// Get the number of buttons and POV Hat switchessupported by this vJoy device
int nButtons = joystick.GetVJDButtonNumber(id);
int ContPovNumber = joystick.GetVJDContPovNumber(id);
int DiscPovNumber = joystick.GetVJDDiscPovNumber(id);
// Print results
Console.WriteLine("vJoy Device {0}", id);
Console.WriteLine("Checking...Numner of buttons\t\t{0}\tPass", nButtons);
Console.WriteLine("Checking...Numner of Continuous POVs\t{0}\tPass", ContPovNumber);
Console.WriteLine("Checking...Numner of Descrete POVs\t{0}\tPass", DiscPovNumber);
if (ContPovNumber > DiscPovNumber)
isPovCon = true;
Console.WriteLine("Checking...Axis X\t\t\t{0}\tPass", AxisX ? "Yes" : "No");
Console.WriteLine("Checking...Axis Y\t\t\t{0}\tPass", AxisX ? "Yes" : "No");
Console.WriteLine("Checking...Axis Z\t\t\t{0}\tPass", AxisX ? "Yes" : "No");
Console.WriteLine("Checking...Axis Rx\t\t\t{0}\tPass", AxisRX ? "Yes" : "No");
Console.WriteLine("Checking...Axis Ry\t\t\t{0}\tPass", AxisRY ? "Yes" : "No");
Console.WriteLine("Checking...Axis Rz\t\t\t{0}\tPass", AxisRZ ? "Yes" : "No");
Console.WriteLine("Checking...Axis SL0\t\t\t{0}\tPass", AxisSL0 ? "Yes" : "No");
Console.WriteLine("Checking...Axis SL1\t\t\t{0}\tPass", AxisSL1 ? "Yes" : "No");
// Test if DLL matches the driver
UInt32 DllVer = 0, DrvVer = 0;
bool match = joystick.DriverMatch(ref DllVer, ref DrvVer);
if (match)
Console.WriteLine("Checking...Version of Driver Matches DLL Version ({0:X})\n", DllVer);
else
Console.WriteLine("Checking...Version of Driver ({0:X}) does NOT match DLL Version ({1:X})\n", DrvVer, DllVer);
// Acquire the target
if ((status == VjdStat.VJD_STAT_OWN) || ((status == VjdStat.VJD_STAT_FREE) && (!joystick.AcquireVJD(id))))
{
Console.ForegroundColor = ConsoleColor.Red;
Console.WriteLine("Failed to acquire vJoy device number {0}.\n", id);
return;
}
else
Console.WriteLine("Acquired: vJoy device number {0}.\n", id);
joystick.ResetAll();
Console.ForegroundColor = ConsoleColor.Green;
Console.WriteLine("System All Green.Now Start...");
Console.ForegroundColor = ConsoleColor.White;
readConfig();
printHello();
joystick.GetVJDAxisMax(id, HID_USAGES.HID_USAGE_X, ref axisMaxval);
UdpState axisUdpState = new UdpState();
axisUdpState.ipEndPoint = new IPEndPoint(IPAddress.Any, AxisPort);
axisUdpState.udpClient = new UdpClient(AxisPort);
axisUdpState.udpClient.BeginReceive(AxisUDPRecieved, axisUdpState);
UdpState ctlUdpState = new UdpState();
ctlUdpState.ipEndPoint = new IPEndPoint(IPAddress.Any, CtlPort);
ctlUdpState.udpClient = new UdpClient(CtlPort);
ctlUdpState.udpClient.BeginReceive(CtlUDPRecieved, ctlUdpState);
try
{
NetworkInterface[] nics = NetworkInterface.GetAllNetworkInterfaces();
foreach (NetworkInterface adapter in nics)
{
if (adapter.OperationalStatus != OperationalStatus.Up) //filter unavaliable interface
continue;
if (adapter.NetworkInterfaceType == NetworkInterfaceType.Ethernet | adapter.NetworkInterfaceType == NetworkInterfaceType.Wireless80211)
{
IPInterfaceProperties ip = adapter.GetIPProperties();
UnicastIPAddressInformationCollection ipCollection = ip.UnicastAddresses;
foreach (UnicastIPAddressInformation ipadd in ipCollection)
{
if (ipadd.Address.AddressFamily == AddressFamily.InterNetwork)
//判断是否为ipv4
Console.WriteLine(adapter.Name + " : " + ipadd.Address.ToString());//获取ip
}
}
}
}
catch (System.Security.SecurityException)
{
Console.WriteLine("firewall banned application.");
}
catch (Exception e)
{
Console.WriteLine(e.ToString());
}
while (true) Thread.Sleep(1000000);
}
private vJoy initVjoy(uint id)
{
var joystick = new vJoy();
var iReport = new vJoy.JoystickState();
// Get the state of the requested device
VjdStat status = joystick.GetVJDStatus(id);
/*switch (status)
{
case VjdStat.VJD_STAT_OWN:
MessageBox.Show(string.Format("vJoy Device {0} is already owned by this feeder\n", id));
break;
case VjdStat.VJD_STAT_FREE:
MessageBox.Show(string.Format("vJoy Device {0} is free\n", id));
break;
case VjdStat.VJD_STAT_BUSY:
MessageBox.Show(string.Format("vJoy Device {0} is already owned by another feeder\nCannot continue\n", id));
return joystick;
case VjdStat.VJD_STAT_MISS:
MessageBox.Show(string.Format("vJoy Device {0} is not installed or disabled\nCannot continue\n", id));
return joystick;
default:
MessageBox.Show(string.Format("vJoy Device {0} general error\nCannot continue\n", id));
return joystick;
}*/
bool AxisX = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_X);
if (joystick.AcquireVJD(id) == false)
MessageBox.Show("Could not acquire vJoy " + id);
Console.WriteLine(AxisX);
return joystick;
}
public void Initialize()
{
// Create one joystick object and a position structure.
joystick = new vJoy();
iReport = new vJoy.JoystickState();
// Get the driver attributes (Vendor ID, Product ID, Version Number)
if (!joystick.vJoyEnabled())
{
Console.WriteLine("vJoy driver not enabled: Failed Getting vJoy attributes.\n");
return;
}
else
Console.WriteLine("Vendor: {0}\nProduct :{1}\nVersion Number:{2}\n", joystick.GetvJoyManufacturerString(), joystick.GetvJoyProductString(), joystick.GetvJoySerialNumberString());
// Get the state of the requested device
VjdStat status = joystick.GetVJDStatus(deviceId);
switch (status)
{
case VjdStat.VJD_STAT_OWN:
Console.WriteLine("vJoy Device {0} is already owned by this feeder\n", deviceId);
break;
case VjdStat.VJD_STAT_FREE:
Console.WriteLine("vJoy Device {0} is free\n", deviceId);
break;
case VjdStat.VJD_STAT_BUSY:
Console.WriteLine("vJoy Device {0} is already owned by another feeder\nCannot continue\n", deviceId);
return;
case VjdStat.VJD_STAT_MISS:
Console.WriteLine("vJoy Device {0} is not installed or disabled\nCannot continue\n", deviceId);
return;
default:
Console.WriteLine("vJoy Device {0} general error\nCannot continue\n", deviceId);
return;
};
// Check which axes are supported
bool AxisX = joystick.GetVJDAxisExist(deviceId, HID_USAGES.HID_USAGE_X);
bool AxisY = joystick.GetVJDAxisExist(deviceId, HID_USAGES.HID_USAGE_Y);
bool AxisZ = joystick.GetVJDAxisExist(deviceId, HID_USAGES.HID_USAGE_Z);
bool AxisRX = joystick.GetVJDAxisExist(deviceId, HID_USAGES.HID_USAGE_RX);
bool AxisRZ = joystick.GetVJDAxisExist(deviceId, HID_USAGES.HID_USAGE_RZ);
// Get the number of buttons and POV Hat switchessupported by this vJoy device
int nButtons = joystick.GetVJDButtonNumber(deviceId);
int ContPovNumber = joystick.GetVJDContPovNumber(deviceId);
int DiscPovNumber = joystick.GetVJDDiscPovNumber(deviceId);
// Print results
Console.WriteLine("\nvJoy Device {0} capabilities:\n", deviceId);
Console.WriteLine("Numner of buttons\t\t{0}\n", nButtons);
Console.WriteLine("Numner of Continuous POVs\t{0}\n", ContPovNumber);
Console.WriteLine("Numner of Descrete POVs\t\t{0}\n", DiscPovNumber);
Console.WriteLine("Axis X\t\t{0}\n", AxisX ? "Yes" : "No");
Console.WriteLine("Axis Y\t\t{0}\n", AxisX ? "Yes" : "No");
Console.WriteLine("Axis Z\t\t{0}\n", AxisX ? "Yes" : "No");
Console.WriteLine("Axis Rx\t\t{0}\n", AxisRX ? "Yes" : "No");
Console.WriteLine("Axis Rz\t\t{0}\n", AxisRZ ? "Yes" : "No");
// Test if DLL matches the driver
UInt32 DllVer = 0, DrvVer = 0;
bool match = joystick.DriverMatch(ref DllVer, ref DrvVer);
if (match)
Console.WriteLine("Version of Driver Matches DLL Version ({0:X})\n", DllVer);
else
Console.WriteLine("Version of Driver ({0:X}) does NOT match DLL Version ({1:X})\n", DrvVer, DllVer);
System.Threading.Thread.Sleep(500);
// Acquire the target
if ((status == VjdStat.VJD_STAT_OWN) || ((status == VjdStat.VJD_STAT_FREE) && (!joystick.AcquireVJD(deviceId))))
{
Console.WriteLine("Failed to acquire vJoy device number {0}.\n", deviceId);
return;
}
else
Console.WriteLine("Acquired: vJoy device number {0}.\n", deviceId);
joystick.GetVJDAxisMax(deviceId, HID_USAGES.HID_USAGE_X, ref xMaxVal);
joystick.GetVJDAxisMin(deviceId, HID_USAGES.HID_USAGE_X, ref xMinVal);
joystick.GetVJDAxisMax(deviceId, HID_USAGES.HID_USAGE_Y, ref yMaxVal);
joystick.GetVJDAxisMin(deviceId, HID_USAGES.HID_USAGE_Y, ref yMinVal);
}
public static void Main(string[] args)
{
// Create one joystick object and a position structure.
joystick = new vJoy();
iReport = new vJoy.JoystickState();
// Device ID can only be in the range 1-16
if (args.Length>0 && !String.IsNullOrEmpty(args[0]))
id = Convert.ToUInt32(args[0]);
if (id <= 0 || id > 16)
{
Console.WriteLine("Illegal device ID {0}\nExit!",id);
return;
}
// Get the driver attributes (Vendor ID, Product ID, Version Number)
if (!joystick.vJoyEnabled())
{
Console.WriteLine("vJoy driver not enabled: Failed Getting vJoy attributes.\n");
return;
}
else
Console.WriteLine("Vendor: {0}\nProduct :{1}\nVersion Number:{2}\n", joystick.GetvJoyManufacturerString(), joystick.GetvJoyProductString(), joystick.GetvJoySerialNumberString());
// Get the state of the requested device
VjdStat status = joystick.GetVJDStatus(id);
switch (status)
{
case VjdStat.VJD_STAT_OWN:
Console.WriteLine("vJoy Device {0} is already owned by this feeder\n", id);
break;
case VjdStat.VJD_STAT_FREE:
Console.WriteLine("vJoy Device {0} is free\n", id);
break;
case VjdStat.VJD_STAT_BUSY:
Console.WriteLine("vJoy Device {0} is already owned by another feeder\nCannot continue\n", id);
return;
case VjdStat.VJD_STAT_MISS:
Console.WriteLine("vJoy Device {0} is not installed or disabled\nCannot continue\n", id);
return;
default:
Console.WriteLine("vJoy Device {0} general error\nCannot continue\n", id);
return;
};
// Check which axes are supported
bool AxisX = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_X);
bool AxisY = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_Y);
//bool AxisRX = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_RX);
//bool AxisRY = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_RY);
//bool AxisRZ = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_RZ);
// Get the number of buttons and POV Hat switchessupported by this vJoy device
int nButtons = joystick.GetVJDButtonNumber(id);
int ContPovNumber = joystick.GetVJDContPovNumber(id);
int DiscPovNumber = joystick.GetVJDDiscPovNumber(id);
// Print results
Console.WriteLine("\nvJoy Device {0} capabilities:\n", id);
Console.WriteLine("Numner of buttons\t\t{0}\n", nButtons);
Console.WriteLine("Numner of Continuous POVs\t{0}\n", ContPovNumber);
Console.WriteLine("Numner of Descrete POVs\t\t{0}\n", DiscPovNumber);
Console.WriteLine("Axis X\t\t{0}\n", AxisX ? "Yes" : "No");
Console.WriteLine("Axis Y\t\t{0}\n", AxisY ? "Yes" : "No");
//Console.WriteLine("Axis RX\t\t{0}\n", AxisRX ? "Yes" : "No");
//Console.WriteLine("Axis RY\t\t{0}\n", AxisRY ? "Yes" : "No");
//Console.WriteLine("Axis RZ\t\t{0}\n", AxisRZ ? "Yes" : "No");
// Test if DLL matches the driver
UInt32 DllVer = 0, DrvVer = 0;
bool match = joystick.DriverMatch(ref DllVer, ref DrvVer);
if (match)
Console.WriteLine("Version of Driver Matches DLL Version ({0:X})\n", DllVer);
else
Console.WriteLine("Version of Driver ({0:X}) does NOT match DLL Version ({1:X})\n", DrvVer, DllVer);
// Acquire the target
if ((status == VjdStat.VJD_STAT_OWN) || ((status == VjdStat.VJD_STAT_FREE) && (!joystick.AcquireVJD(id))))
{
Console.WriteLine("Failed to acquire vJoy device number {0}.\n", id);
return ;
}
else
Console.WriteLine("Acquired: vJoy device number {0}.\n", id);
Console.WriteLine("\npress enter to stat feeding");
//Console.ReadKey(true);
uint count = 0;
X = 20;
Y = 30;
joystick.GetVJDAxisMax(id, HID_USAGES.HID_USAGE_X, ref maxval);
#if ROBUST
// Reset this device to default values
joystick.ResetVJD(id);
// Feed the device in endless loop
while (true)
{
lock (_locker)
{
//Console.WriteLine("JOYSTICK X: " + X.ToString() + " Y: " + Y.ToString());
//Console.WriteLine("coefficient: " + coefficient.ToString());
// Set position of 4 axes
res = joystick.SetAxis(X, id, HID_USAGES.HID_USAGE_X);
res = joystick.SetAxis(Y, id, HID_USAGES.HID_USAGE_Y);
//res = joystick.SetAxis(RY, id, HID_USAGES.HID_USAGE_RX);
//res = joystick.SetAxis(RY, id, HID_USAGES.HID_USAGE_RY);
//res = joystick.SetAxis(RZ, id, HID_USAGES.HID_USAGE_RZ);
// Press/Release Buttons
//res = joystick.SetBtn(true, id, count / 50);
//res = joystick.SetBtn(false, id, 1 + count / 50);
}
//Console.WriteLine(X);
//Console.WriteLine(Y);
// If Continuous POV hat switches installed - make them go round
// For high values - put the switches in neutral state
/*if (ContPovNumber>0)
{
if ((count * 70) < 30000)
{
res = joystick.SetContPov(((int)count * 70), id, 1);
//res = joystick.SetContPov(((int)count * 70) + 2000, id, 2);
res = joystick.SetContPov(((int)count * 70) + 4000, id, 3);
res = joystick.SetContPov(((int)count * 70) + 6000, id, 4);
}
else
{
res = joystick.SetContPov(-1, id, 1);
res = joystick.SetContPov(-1, id, 2);
res = joystick.SetContPov(-1, id, 3);
res = joystick.SetContPov(-1, id, 4);
};
};*/
// If Discrete POV hat switches installed - make them go round
// From time to time - put the switches in neutral state
/*if (DiscPovNumber>0)
{
if (count < 550)
{
joystick.SetDiscPov((((int)count / 20) + 0) % 4, id, 1);
joystick.SetDiscPov((((int)count / 20) + 1) % 4, id, 2);
joystick.SetDiscPov((((int)count / 20) + 2) % 4, id, 3);
joystick.SetDiscPov((((int)count / 20) + 3) % 4, id, 4);
}
else
{
joystick.SetDiscPov(-1, id, 1);
joystick.SetDiscPov(-1, id, 2);
joystick.SetDiscPov(-1, id, 3);
joystick.SetDiscPov(-1, id, 4);
};
};*/
System.Threading.Thread.Sleep(20);
if (X > maxval) X = 0;
if (Y > maxval) Y = 0;
//Z += 350; if (Z > maxval) Z = 0;
//XR += 220; if (XR > maxval) XR = 0;
//ZR += 200; if (ZR > maxval) ZR = 0;
//count++;
//if (count > 640)
// count = 0;
} // While (Robust)
#endif // ROBUST
/*
#if EFFICIENT
byte[] pov = new byte[4];
while (true)
{
iReport.bDevice = (byte)id;
iReport.AxisX = X;
iReport.AxisY = Y;
iReport.AxisZ = Z;
iReport.AxisZRot = ZR;
iReport.AxisXRot = XR;
// Set buttons one by one
iReport.Buttons = (uint)(0x1 << (int)(count / 20));
if (ContPovNumber>0)
{
// Make Continuous POV Hat spin
iReport.bHats = (count*70);
iReport.bHatsEx1 = (count*70)+3000;
iReport.bHatsEx2 = (count*70)+5000;
iReport.bHatsEx3 = 15000 - (count*70);
if ((count*70) > 36000)
{
iReport.bHats = 0xFFFFFFFF; // Neutral state
iReport.bHatsEx1 = 0xFFFFFFFF; // Neutral state
iReport.bHatsEx2 = 0xFFFFFFFF; // Neutral state
iReport.bHatsEx3 = 0xFFFFFFFF; // Neutral state
};
}
else
{
// Make 5-position POV Hat spin
pov[0] = (byte)(((count / 20) + 0)%4);
pov[1] = (byte)(((count / 20) + 1) % 4);
pov[2] = (byte)(((count / 20) + 2) % 4);
pov[3] = (byte)(((count / 20) + 3) % 4);
iReport.bHats = (uint)(pov[3]<<12) | (uint)(pov[2]<<8) | (uint)(pov[1]<<4) | (uint)pov[0];
if ((count) > 550)
iReport.bHats = 0xFFFFFFFF; // Neutral state
};
/*** Feed the driver with the position packet - is fails then wait for input then try to re-acquire device ***/
/*
if (!joystick.UpdateVJD(id, ref iReport))
{
Console.WriteLine("Feeding vJoy device number {0} failed - try to enable device then press enter\n", id);
Console.ReadKey(true);
joystick.AcquireVJD(id);
}
System.Threading.Thread.Sleep(20);
count++;
if (count > 640) count = 0;
X += 150; if (X > maxval) X = 0;
Y += 250; if (Y > maxval) Y = 0;
Z += 350; if (Z > maxval) Z = 0;
XR += 220; if (XR > maxval) XR = 0;
ZR += 200; if (ZR > maxval) ZR = 0;
}; // While
#endif
// EFFICIENT*/
} // Main
public TesterForm()
{
InitializeComponent();
joystick = new vJoy();
position = new vJoy.JoystickState();
///// General driver data
short iVer = joystick.GetvJoyVersion();
bool enabled = joystick.vJoyEnabled();
string Prd = joystick.GetvJoyProductString();
string Mnf = joystick.GetvJoyManufacturerString();
string Srl = joystick.GetvJoySerialNumberString();
string prt = String.Format("Product: {0}; Version {1:X}; Manuf: {2}; Serial:{3}", Prd, iVer, Mnf, Srl);
label1.Text = prt;
Enbld.Checked = enabled;
///// vJoy Device properties
int nBtn = joystick.GetVJDButtonNumber(id);
int nDPov = joystick.GetVJDDiscPovNumber(id);
int nCPov = joystick.GetVJDContPovNumber(id);
bool X_Exist = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_X);
bool Y_Exist = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_Y);
bool Z_Exist = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_Z);
bool RX_Exist = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_RX);
prt = String.Format("Device[{0}]: Buttons={1}; DiscPOVs:{2}; ContPOVs:{3}", id, nBtn, nDPov, nCPov);
label2.Text = prt;
UInt32 DllVer = 0, DrvVer = 0;
bool match = joystick.DriverMatch(ref DllVer, ref DrvVer);
if (match)
prt = String.Format("Version of Driver Matches DLL Version {0:X}", DllVer);
else
prt = String.Format("Version of Driver ({0:X}) does NOT match DLL Version ({1:X})", DrvVer, DllVer);
label7.Text = prt;
long max = 10, min = 10;
bool ok;
ok = joystick.GetVJDAxisMax(id, HID_USAGES.HID_USAGE_X, ref max);
ok = joystick.GetVJDAxisMin(id, HID_USAGES.HID_USAGE_X, ref min);
///// Write access to vJoy Device - Basic
VjdStat status;
status = joystick.GetVJDStatus(id);
bool acq = joystick.AcquireVJD(id);
status = joystick.GetVJDStatus(id);
position.AxisX = 1000;
position.AxisY = 5000;
position.AxisZ = 10000;
position.AxisXRot = 20000;
position.Buttons = 0xA5A5A5A5;
position.ButtonsEx1 = 0;
bool upd = joystick.UpdateVJD(id, ref position);
status = joystick.GetVJDStatus(id);
//// Reset functions
joystick.ResetButtons(id);
// Register callback function
// Function to register: Removal()
// User data to pass: label2
joystick.RegisterRemovalCB(Removal, label2);
}
public KeyBind(int index, string label, string type, string keyname, byte keycode)
{
Index = index;
Label = label;
Type = type;
KeyName = keyname;
KeyCode = keycode;
if (type == "Joystick")
{
joystick = new vJoy();
joystickReport = new vJoy.JoystickState();
}
}
bool FeedDinputDevice(uint id, out string message)
{
message = "";
// Create one joystick object and a position structure.
joystick = new vJoy();
iReport = new vJoy.JoystickState();
// Device ID can only be in the range 1-16
if (id <= 0 || id > 16)
{
message += string.Format("Illegal device ID {0}\nExit!", id);
return false;
}
// Get the driver attributes (Vendor ID, Product ID, Version Number)
if (!joystick.vJoyEnabled())
{
message += string.Format("vJoy driver not enabled: Failed Getting vJoy attributes.\n");
return false;
}
else
message += string.Format("Vendor: {0}\nProduct :{1}\nVersion Number:{2}\n", joystick.GetvJoyManufacturerString(), joystick.GetvJoyProductString(), joystick.GetvJoySerialNumberString());
// Get the state of the requested device
VjdStat status = joystick.GetVJDStatus(id);
switch (status)
{
case VjdStat.VJD_STAT_OWN:
message += string.Format("vJoy Device {0} is already owned by this feeder\n", id);
break;
case VjdStat.VJD_STAT_FREE:
message += string.Format("vJoy Device {0} is free\n", id);
break;
case VjdStat.VJD_STAT_BUSY:
message += string.Format("vJoy Device {0} is already owned by another feeder\nCannot continue\n", id);
return false;
case VjdStat.VJD_STAT_MISS:
message += string.Format("vJoy Device {0} is not installed or disabled\nCannot continue\n", id);
return false;
default:
message += string.Format("vJoy Device {0} general error\nCannot continue\n", id);
return false;
};
// Check which axes are supported
bool AxisX = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_X);
bool AxisY = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_Y);
bool AxisZ = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_Z);
bool AxisRX = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_RX);
bool AxisRZ = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_RZ);
// Get the number of buttons and POV Hat switches supported by this vJoy device
int nButtons = joystick.GetVJDButtonNumber(id);
int ContPovNumber = joystick.GetVJDContPovNumber(id);
int DiscPovNumber = joystick.GetVJDDiscPovNumber(id);
// Print results
message += string.Format("\nvJoy Device {0} capabilities:\n", id);
message += string.Format("Number of buttons\t\t{0}\n", nButtons);
message += string.Format("Number of Continuous POVs\t{0}\n", ContPovNumber);
message += string.Format("Number of Discrete POVs\t\t{0}\n", DiscPovNumber);
message += string.Format("Axis X\t\t{0}\n", AxisX ? "Yes" : "No");
message += string.Format("Axis Y\t\t{0}\n", AxisX ? "Yes" : "No");
message += string.Format("Axis Z\t\t{0}\n", AxisX ? "Yes" : "No");
message += string.Format("Axis Rx\t\t{0}\n", AxisRX ? "Yes" : "No");
message += string.Format("Axis Rz\t\t{0}\n", AxisRZ ? "Yes" : "No");
// Test if DLL matches the driver
UInt32 DllVer = 0, DrvVer = 0;
bool match = joystick.DriverMatch(ref DllVer, ref DrvVer);
if (match)
{
message += string.Format("Version of Driver Matches DLL Version ({0:X})\n", DllVer);
}
else
{
message += string.Format("Version of Driver ({0:X}) does NOT match DLL Version ({1:X})\n", DrvVer, DllVer);
}
// Acquire the target
if ((status == VjdStat.VJD_STAT_OWN) || ((status == VjdStat.VJD_STAT_FREE) && (!joystick.AcquireVJD(id))))
{
message += string.Format("Failed to acquire vJoy device number {0}.\n", id);
return false;
}
else
{
message += string.Format("Acquired: vJoy device number {0}.\n", id);
}
int X, Y, Z, ZR, XR;
uint count = 0;
long maxval = 0;
X = 20;
Y = 30;
Z = 40;
XR = 60;
ZR = 80;
joystick.GetVJDAxisMax(id, HID_USAGES.HID_USAGE_X, ref maxval);
bool res;
// Reset this device to default values
joystick.ResetVJD(id);
// Feed the device in endless loop
while (!Program.IsClosing && FeedingEnabled)
{
// Set position of 4 axes
res = joystick.SetAxis(X, id, HID_USAGES.HID_USAGE_X);
res = joystick.SetAxis(Y, id, HID_USAGES.HID_USAGE_Y);
res = joystick.SetAxis(Z, id, HID_USAGES.HID_USAGE_Z);
res = joystick.SetAxis(XR, id, HID_USAGES.HID_USAGE_RX);
res = joystick.SetAxis(ZR, id, HID_USAGES.HID_USAGE_RZ);
// Press/Release Buttons
res = joystick.SetBtn(true, id, count / 50);
res = joystick.SetBtn(false, id, 1 + count / 50);
// If Continuous POV hat switches installed - make them go round
// For high values - put the switches in neutral state
if (ContPovNumber > 0)
{
if ((count * 70) < 30000)
{
res = joystick.SetContPov(((int)count * 70), id, 1);
res = joystick.SetContPov(((int)count * 70) + 2000, id, 2);
res = joystick.SetContPov(((int)count * 70) + 4000, id, 3);
res = joystick.SetContPov(((int)count * 70) + 6000, id, 4);
}
else
{
res = joystick.SetContPov(-1, id, 1);
res = joystick.SetContPov(-1, id, 2);
res = joystick.SetContPov(-1, id, 3);
res = joystick.SetContPov(-1, id, 4);
};
};
// If Discrete POV hat switches installed - make them go round
// From time to time - put the switches in neutral state
if (DiscPovNumber > 0)
{
if (count < 550)
{
joystick.SetDiscPov((((int)count / 20) + 0) % 4, id, 1);
joystick.SetDiscPov((((int)count / 20) + 1) % 4, id, 2);
joystick.SetDiscPov((((int)count / 20) + 2) % 4, id, 3);
joystick.SetDiscPov((((int)count / 20) + 3) % 4, id, 4);
}
else
{
joystick.SetDiscPov(-1, id, 1);
joystick.SetDiscPov(-1, id, 2);
joystick.SetDiscPov(-1, id, 3);
joystick.SetDiscPov(-1, id, 4);
};
};
System.Threading.Thread.Sleep(20);
X += 150; if (X > maxval) X = 0;
Y += 250; if (Y > maxval) Y = 0;
Z += 350; if (Z > maxval) Z = 0;
XR += 220; if (XR > maxval) XR = 0;
ZR += 200; if (ZR > maxval) ZR = 0;
count++;
if (count > 640)
count = 0;
} // While (Robust)
return true;
}
public MainForm()
{
// Create one joystick object and a position structure.
joystick = new vJoy();
iReport = new vJoy.JoystickState();
// Get the driver attributes (Vendor ID, Product ID, Version Number)
if (!joystick.vJoyEnabled())
{
Console.WriteLine("vJoy driver not enabled: Failed Getting vJoy attributes.\n");
return;
}
else
Console.WriteLine("Vendor: {0}\nProduct :{1}\nVersion Number:{2}\n", joystick.GetvJoyManufacturerString(), joystick.GetvJoyProductString(), joystick.GetvJoySerialNumberString());
// Get the state of the requested device
VjdStat status = joystick.GetVJDStatus(id);
switch (status)
{
case VjdStat.VJD_STAT_OWN:
Console.WriteLine("vJoy Device {0} is already owned by this feeder\n", id);
break;
case VjdStat.VJD_STAT_FREE:
Console.WriteLine("vJoy Device {0} is free\n", id);
break;
case VjdStat.VJD_STAT_BUSY:
Console.WriteLine("vJoy Device {0} is already owned by another feeder\nCannot continue\n", id);
return;
case VjdStat.VJD_STAT_MISS:
Console.WriteLine("vJoy Device {0} is not installed or disabled\nCannot continue\n", id);
return;
default:
Console.WriteLine("vJoy Device {0} general error\nCannot continue\n", id);
return;
};
// Check which axes are supported
bool AxisX = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_X);
bool AxisY = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_Y);
bool AxisZ = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_Z);
bool AxisRX = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_RX);
bool AxisRZ = joystick.GetVJDAxisExist(id, HID_USAGES.HID_USAGE_RZ);
// Get the number of buttons and POV Hat switchessupported by this vJoy device
int nButtons = joystick.GetVJDButtonNumber(id);
int ContPovNumber = joystick.GetVJDContPovNumber(id);
int DiscPovNumber = joystick.GetVJDDiscPovNumber(id);
// Print results
Console.WriteLine("\nvJoy Device {0} capabilities:\n", id);
Console.WriteLine("Numner of buttons\t\t{0}\n", nButtons);
Console.WriteLine("Numner of Continuous POVs\t{0}\n", ContPovNumber);
Console.WriteLine("Numner of Descrete POVs\t\t{0}\n", DiscPovNumber);
Console.WriteLine("Axis X\t\t{0}\n", AxisX ? "Yes" : "No");
Console.WriteLine("Axis Y\t\t{0}\n", AxisX ? "Yes" : "No");
Console.WriteLine("Axis Z\t\t{0}\n", AxisX ? "Yes" : "No");
Console.WriteLine("Axis Rx\t\t{0}\n", AxisRX ? "Yes" : "No");
Console.WriteLine("Axis Rz\t\t{0}\n", AxisRZ ? "Yes" : "No");
// Test if DLL matches the driver
UInt32 DllVer = 0, DrvVer = 0;
bool match = joystick.DriverMatch(ref DllVer, ref DrvVer);
if (match)
Console.WriteLine("Version of Driver Matches DLL Version ({0:X})\n", DllVer);
else
Console.WriteLine("Version of Driver ({0:X}) does NOT match DLL Version ({1:X})\n", DrvVer, DllVer);
// Acquire the target
if ((status == VjdStat.VJD_STAT_OWN) || ((status == VjdStat.VJD_STAT_FREE) && (!joystick.AcquireVJD(id))))
{
Console.WriteLine("Failed to acquire vJoy device number {0}.\n", id);
return;
}
else
Console.WriteLine("Acquired: vJoy device number {0}.\n", id);
//
// Required for Windows Form Designer support
//
InitializeComponent();
controllerBox = 0;
extendedView = false;
//pictureBox1.Image = new Bitmap(String.Concat(path,"\\images\\/images/xboxControllerFront.png"));
path = absPath();
//Background images
pictureBox1.Image = new Bitmap(this.GetType(), "xboxControllerFront.png");
pictureBox2.Image = new Bitmap(this.GetType(), "xboxControllerTop.png");
//Marks
mark = new Bitmap(this.GetType(), "green_mark.png");
markAxisL = new Bitmap(this.GetType(), "markAxis.png");
markAxisR = new Bitmap(this.GetType(), "markAxis.png");
markLB = new Bitmap(this.GetType(), "green_LB.png");
markRB = new Bitmap(this.GetType(), "green_RB.png");
markLT = new Bitmap(this.GetType(), "green_LT.png");
markRT = new Bitmap(this.GetType(), "green_RT.png");
//Extended triggers and bumpers
markFLB = new Bitmap(this.GetType(), "green_FLB.png");
markFRB = new Bitmap(this.GetType(), "green_FRB.png");
markFLT = new Bitmap(this.GetType(), "green_FLT.png");
markFRT = new Bitmap(this.GetType(), "green_FRT.png");
pictureBox1.Paint += new PaintEventHandler(pictureBox1_Paint);
pictureBox2.Paint += new PaintEventHandler(pictureBox2_Paint);
timer = new UITimer();
timer.Interval = 10;
timer.Tick += new EventHandler(timer_Tick);
timer.Start();
// Create the thread object. This does not start the thread.
workerObject = new Worker();
workerThread = new Thread(workerObject.DoWork);
// Start the worker thread.
//workerThread.Start();
}
private void Initialize_vJoy()
{
// Create one joystick object and a position structure.
joystick = new vJoy();
iReport = new vJoy.JoystickState();
// Get the driver attributes (Vendor ID, Product ID, Version Number)
if (!joystick.vJoyEnabled())
{
MessageBox.Show("vJoy driver not enabled: Failed Getting vJoy attributes.\n");
Program._shouldExit = true;
System.Environment.Exit(0);
}
// Get the state of the requested device
VjdStat status = joystick.GetVJDStatus(id);
switch (status)
{
case VjdStat.VJD_STAT_OWN:
break;
case VjdStat.VJD_STAT_FREE:
break;
case VjdStat.VJD_STAT_BUSY:
MessageBox.Show("vJoy Device is already owned by another feeder\nInput feeding will not occur.");
//System.Environment.Exit(0);
return;
case VjdStat.VJD_STAT_MISS:
MessageBox.Show("vJoy Device is not installed or disabled\nInput feeding will not occur.");
//System.Environment.Exit(0);
return;
default:
MessageBox.Show("vJoy Device general error\nInput feeding will not occur.");
//System.Environment.Exit(0);
return;
};
// Get the number of buttons and POV Hat switchessupported by this vJoy device
int nButtons = joystick.GetVJDButtonNumber(id);
int ContPovNumber = joystick.GetVJDContPovNumber(id);
int DiscPovNumber = joystick.GetVJDDiscPovNumber(id);
// Acquire the target
if ((status == VjdStat.VJD_STAT_OWN) || ((status == VjdStat.VJD_STAT_FREE) && (!joystick.AcquireVJD(id))))
{
MessageBox.Show("Failed to acquire vJoy device number");
Program._shouldExit = true;
System.Environment.Exit(0);
}
joystick.ResetVJD(id);
}
