private void createPump(ComponentTable ct, String[] tokens) { id = Convert.ToInt32(tokens[1]); x = Convert.ToInt32(tokens[2]); y = Convert.ToInt32(tokens[3]); int f = Convert.ToInt32(tokens[4]); int isOutAvail = Convert.ToInt32(tokens[5]); Point p = new Point(x, y); Pump pump = new Pump(id, p, type); ct.CompList.Add(pump); pump.Flow = f; pump.IsOutAvailable = isOutAvail; }
private void leftClickBehaviour(object sender, MouseEventArgs e) { //You cannot click outside of the mapbox if (((e.X + menuImages.Images[0].Width < mapBox.Width) && (e.Y + menuImages.Images[0].Height < mapBox.Height)) || typeC == (int)EnumTypes.Pipe) { if (ct.OverlappingComp(e.Location, menuImages) != -1 && typeC <= (int)EnumTypes.Merger) { MessageBox.Show("There cannot be an overlapping of components!"); } else { Component c1 = null; // Creating a Component object in order to use the heritage (subcomponents) switch (typeC) // Switching between type of Component in order to place the different images depending on the clicked button { case (int)EnumTypes.Sink: // Creating the new object (Sick in this case) - The (int)EnumTypes.Sink uses the enum created so you don't need to remember which number is it each type. c1 = new Sink(id, e.Location, 0, (int)EnumTypes.Sink); break; case (int)EnumTypes.Pump: c1 = new Pump(id, e.Location, (int)EnumTypes.Pump); break; case (int)EnumTypes.Merger: c1 = new Merger(id, e.Location, (int)EnumTypes.Merger); break; case (int)EnumTypes.Regulable: c1 = new Regulable(id, e.Location, 1, 50, (int)EnumTypes.Regulable); break; case (int)EnumTypes.Normal: c1 = new Normal(id, e.Location, 0, (int)EnumTypes.Normal); break; case (int)EnumTypes.Pipe: if (idStart == -1) { int resulStart = ct.pointOverlappingComp(e.Location, menuImages); if (resulStart != -1) { if (ct.isComponentConnectionAvailable(resulStart, e.Location, menuImages) == -1) { idStart = resulStart; typeOfConnectionStart = ct.whatKindOfCoennectionIs(idStart, e.Location, menuImages); } else { MessageBox.Show(ct.isComponentConnectionAvailable(resulStart, e.Location, menuImages).ToString()); cleanValues(); } } else { MessageBox.Show("You should click ontop of a component"); cleanValues(); } } else { int resulEnd = ct.pointOverlappingComp(e.Location, menuImages); if (resulEnd != -1 && (idStart != resulEnd)) { if (ct.isComponentConnectionAvailable(resulEnd, e.Location, menuImages) == -1) { idEnd = resulEnd; typeOfConnectionEnd = ct.whatKindOfCoennectionIs(idEnd, e.Location, menuImages); if (ct.isTheConecctionPossible(typeOfConnectionStart, typeOfConnectionEnd)) { pipeFlowForm = new AskFlow((int)EnumTypes.Pipe); if (pipeFlowForm.ShowDialog(this) == DialogResult.OK) { pipeFlow = (int)pipeFlowForm.GetFlow.Value; if (pipesCoordAux == null) { p = new Pipe(idStart, idEnd, typeOfConnectionStart, typeOfConnectionEnd, pipeId, pipeFlow); } else { p = new Pipe(idStart, idEnd, typeOfConnectionStart, typeOfConnectionEnd, pipesCoordAux, pipeId, pipeFlow); } if (!ct.pipeOverlappingComponent(p, menuImages)) { //makeConnectionInaccessible ct.invalidateConnection(idStart, typeOfConnectionStart, pipeId); ct.invalidateConnection(idEnd, typeOfConnectionEnd, pipeId); ct.PipeList.Add(p); pipeId++; // Inserting the flow into the different components currentFlow = ct.FlowOut(idStart, typeOfConnectionStart, pipeId); //MessageBox.Show(currentFlow.ToString()); /*if (currentFlow >= p.MaxFlow) * { * p.CurrentFlow = p.MaxFlow; * } * else * { * p.CurrentFlow = currentFlow; * }*/ p.CurrentFlow = currentFlow; ct.FlowIn(idEnd, typeOfConnectionEnd, pipeId, p.CurrentFlow); // End cleanValues(); } else { MessageBox.Show("This pipe is overlapping a component"); cleanValues(); } } else { MessageBox.Show("Cancelled!"); } pipeFlowForm.Dispose(); } else { MessageBox.Show("This kind of connection isnĀ“t possible"); cleanValues(); } } else { MessageBox.Show(ct.isComponentConnectionAvailable(resulEnd, e.Location, menuImages).ToString()); cleanValues(); } } else { if (pipesCoordAux == null) { pipesCoordAux = new List <Point>(); pipesCoordAux.Add(e.Location); } else { pipesCoordAux.Add(e.Location); } } } break; case (int)EnumTypes.Remove: ct.RemoveComp(e.Location, menuImages); break; default: break; } if (c1 != null) { id++; // Increments the id of component ct.CompList.Add(c1); // Adding component to the List in the ComponentTable. } else if (c1 == null && typeC > (int)EnumTypes.Pipe) { // If theres no component created and the typeC is out from the component range if (typeC != (int)EnumTypes.Remove) { MessageBox.Show("Error selecting object."); } } } Refresh(); } }
private void leftClickBehaviour(object sender, MouseEventArgs e) { //You cannot click outside of the mapbox if (((e.X + menuImages.Images[0].Width < mapBox.Width) && (e.Y + menuImages.Images[0].Height < mapBox.Height)) || typeC == (int)EnumTypes.Pipe) { if (ct.OverlappingComp(e.Location, menuImages) != -1 && typeC <= (int)EnumTypes.Merger) { MessageBox.Show("There cannot be an overlapping of components!"); } else { Component c1 = null; // Creating a Component object in order to use the heritage (subcomponents) switch (typeC) // Switching between type of Component in order to place the different images depending on the clicked button { case (int)EnumTypes.Sink: // Creating the new object (Sick in this case) - The (int)EnumTypes.Sink uses the enum created so you don't need to remember which number is it each type. c1 = new Sink(id, e.Location, 20, (int)EnumTypes.Sink); break; case (int)EnumTypes.Pump: c1 = new Pump(id, e.Location, (int)EnumTypes.Pump); break; case (int)EnumTypes.Merger: c1 = new Merger(id, e.Location, (int)EnumTypes.Merger); break; case (int)EnumTypes.Regulable: c1 = new Regulable(id, e.Location, 1, 50, (int)EnumTypes.Regulable); break; case (int)EnumTypes.Normal: c1 = new Normal(id, e.Location, 0, (int)EnumTypes.Normal); break; case (int)EnumTypes.Pipe: if (idStart == -1) { int resulStart = ct.pointOverlappingComp(e.Location, menuImages); if (resulStart != -1) { if (ct.isComponentConnectionAvailable(resulStart, e.Location, menuImages) == -1) { idStart = resulStart; typeOfConnectionStart = ct.whatKindOfCoennectionIs(idStart, e.Location, menuImages); } else { MessageBox.Show(ct.isComponentConnectionAvailable(resulStart, e.Location, menuImages).ToString()); cleanValues(); } } else { MessageBox.Show("You should click ontop of a component"); cleanValues(); } } else { int resulEnd = ct.pointOverlappingComp(e.Location, menuImages); if (resulEnd != -1 && (idStart != resulEnd)) { if (ct.isComponentConnectionAvailable(resulEnd, e.Location, menuImages) == -1) { idEnd = resulEnd; typeOfConnectionEnd = ct.whatKindOfCoennectionIs(idEnd, e.Location, menuImages); pipeFlowForm = new AskFlow((int)EnumTypes.Pipe); if (pipeFlowForm.ShowDialog(this) == DialogResult.OK) { pipeFlow = (int)pipeFlowForm.GetFlow.Value; if (pipesCoordAux == null) { p = new Pipe(idStart, idEnd, typeOfConnectionStart, typeOfConnectionEnd, pipeId, pipeFlow); } else { p = new Pipe(idStart, idEnd, typeOfConnectionStart, typeOfConnectionEnd, pipesCoordAux, pipeId, pipeFlow); } if (!ct.pipeOverlappingComponent(p, menuImages)) { //makeConnectionInaccessible ct.invalidateConnection(idStart, typeOfConnectionStart, pipeId); ct.invalidateConnection(idEnd, typeOfConnectionEnd, pipeId); ct.PipeList.Add(p); pipeId++; // Inserting the flow into the different components currentFlow = ct.FlowOut(idStart, typeOfConnectionStart, pipeId); //MessageBox.Show(currentFlow.ToString()); if (currentFlow >= p.MaxFlow) { p.CurrentFlow = p.MaxFlow; } else { p.CurrentFlow = currentFlow; } ct.FlowIn(idEnd, typeOfConnectionEnd, pipeId, p.CurrentFlow); // End cleanValues(); } else { MessageBox.Show("This pipe is overlapping a component"); cleanValues(); } } else { MessageBox.Show("Cancelled!"); } pipeFlowForm.Dispose(); } else { MessageBox.Show(ct.isComponentConnectionAvailable(resulEnd, e.Location, menuImages).ToString()); cleanValues(); } } else { if (pipesCoordAux == null) { pipesCoordAux = new List<Point>(); pipesCoordAux.Add(e.Location); } else { pipesCoordAux.Add(e.Location); } } } break; case (int)EnumTypes.Remove: ct.RemoveComp(e.Location, menuImages); break; default: break; } if (c1 != null) { id++; // Increments the id of component ct.CompList.Add(c1); // Adding component to the List in the ComponentTable. } else if (c1 == null && typeC > (int)EnumTypes.Pipe) { // If theres no component created and the typeC is out from the component range if(typeC != (int)EnumTypes.Remove) MessageBox.Show("Error selecting object."); } } Refresh(); } }