public virtual Tuple <FlashBuilderConsts.flash_page, UInt32> _next_nonsame_page(UInt32 i)
{
if (i >= this.page_list.Count)
{
return(new Tuple <FlashBuilderConsts.flash_page, UInt32>(null, i));
}
FlashBuilderConsts.flash_page page = this.page_list[(int)i];
while ((bool)page.same)
{
i += 1;
if (i >= this.page_list.Count)
{
return(new Tuple <FlashBuilderConsts.flash_page, UInt32>(null, i));
}
page = this.page_list[(int)i];
}
return(Tuple.Create(page, i + 1));
}
//
// Determine fastest method of flashing and then run flash programming.
//
// Data must have already been added with addData
//
public virtual FlashBuilderConsts.ProgrammingInfo program(bool?chip_erase = null, Action <double> progress_cb = null, bool smart_flash = true, bool fast_verify = false)
{
// Assumptions
// 1. Page erases must be on page boundaries ( page_erase_addr % page_size == 0 )
// 2. Page erase can have a different size depending on location
// 3. It is safe to program a page with less than a page of data
// Examples
// - lpc4330 -Non 0 base address
// - nRF51 -UICR location far from flash (address 0x10001000)
// - LPC1768 -Different sized pages
DateTime program_start = DateTime.Now;
progress_cb = progress_cb ?? FlashBuilderConsts._stub_progress;
// There must be at least 1 flash operation
if (this.flash_operation_list.Count == 0)
{
Trace.TraceWarning("No pages were programmed");
return(null);
}
// Convert the list of flash operations into flash pages
UInt32 program_byte_count = 0;
UInt32 flash_addr = this.flash_operation_list[0].addr;
FlashConsts.PageInfo info = this.flash.getPageInfo(flash_addr);
UInt32 page_addr = flash_addr - flash_addr % (UInt32)info.size;
var current_page = new FlashBuilderConsts.flash_page(page_addr, (UInt32)info.size, new List <byte>(), (double)info.erase_weight, (double)info.program_weight);
this.page_list.Add(current_page);
foreach (FlashBuilderConsts.flash_operation flash_op in this.flash_operation_list)
{
UInt32 pos = 0;
while (pos < flash_op.data.Count)
{
// Check if operation is in next page
flash_addr = flash_op.addr + pos;
if (flash_addr >= current_page.addr + current_page.size)
{
info = this.flash.getPageInfo(flash_addr);
page_addr = flash_addr - flash_addr % (UInt32)info.size;
current_page = new FlashBuilderConsts.flash_page(page_addr, (UInt32)info.size, new List <byte>(), (double)info.erase_weight, (double)info.program_weight);
this.page_list.Add(current_page);
}
// Fill the page gap if there is one
UInt32 page_data_end = current_page.addr + (UInt32)current_page.data.Count;
if (flash_addr != page_data_end)
{
List <byte> old_data = this.flash.target.readBlockMemoryUnaligned8(page_data_end, flash_addr - page_data_end);
current_page.data.AddRange(old_data);
}
// Copy data to page and increment pos
UInt32 space_left_in_page = (UInt32)(info.size - current_page.data.Count);
UInt32 space_left_in_data = (UInt32)flash_op.data.Count - pos;
UInt32 amount = Math.Min(space_left_in_page, space_left_in_data);
current_page.data.AddRange(flash_op.data.GetRange((int)pos, (int)amount));
program_byte_count += amount;
//increment position
pos += amount;
}
}
// If smart flash was set to false then mark all pages
// as requiring programming
if (!smart_flash)
{
this._mark_all_pages_for_programming();
}
// If the first page being programmed is not the first page
// in ROM then don't use a chip erase
if (this.page_list[0].addr > this.flash_start)
{
if (chip_erase == null)
{
chip_erase = false;
}
else if (chip_erase == true)
{
Trace.TraceWarning("Chip erase used when flash address 0x{0:X} is not the same as flash start 0x{1:X}", this.page_list[0].addr, this.flash_start);
}
}
this.flash.init();
var _tup_1 = this._compute_chip_erase_pages_and_weight();
var chip_erase_count = _tup_1.Item1;
TimeSpan chip_erase_program_time = TimeSpan.FromSeconds(_tup_1.Item2);
TimeSpan page_erase_min_program_time = TimeSpan.FromSeconds(this._compute_page_erase_pages_weight_min());
// If chip_erase hasn't been specified determine if chip erase is faster
// than page erase regardless of contents
if (chip_erase == null && chip_erase_program_time < page_erase_min_program_time)
{
chip_erase = true;
}
TimeSpan page_program_time = TimeSpan.Zero;
UInt32 sector_erase_count = 0;
// If chip erase isn't True then analyze the flash
if (!(bool)chip_erase)
{
DateTime analyze_start = DateTime.Now;
if ((bool)this.flash.getFlashInfo().crc_supported)
{
var _tup_2 = this._compute_page_erase_pages_and_weight_crc32(fast_verify);
sector_erase_count = _tup_2.Item1;
page_program_time = TimeSpan.FromSeconds(_tup_2.Item2);
this.perf.analyze_type = FlashBuilder.FLASH_ANALYSIS_CRC32;
}
else
{
var _tup_3 = this._compute_page_erase_pages_and_weight_sector_read();
sector_erase_count = _tup_3.Item1;
page_program_time = TimeSpan.FromSeconds(_tup_3.Item2);
this.perf.analyze_type = FlashBuilder.FLASH_ANALYSIS_PARTIAL_PAGE_READ;
}
DateTime analyze_finish = DateTime.Now;
this.perf.analyze_time = analyze_finish - analyze_start;
Trace.TraceInformation(String.Format("Analyze time: {0}", analyze_finish - analyze_start));
}
// If chip erase hasn't been set then determine fastest method to program
if (chip_erase == null)
{
Trace.TraceInformation(String.Format("Chip erase count {0}, Page erase est count {1}", chip_erase_count, sector_erase_count));
//Trace.TraceInformation(String.Format("Chip erase weight {0}, Page erase weight {2}", chip_erase_program_time, page_program_time));
chip_erase = chip_erase_program_time < page_program_time;
}
byte?flash_operation = null;
if ((bool)chip_erase)
{
if (this.flash.isDoubleBufferingSupported() && this.enable_double_buffering)
{
Trace.TraceInformation("Using double buffer chip erase program");
flash_operation = this._chip_erase_program_double_buffer(progress_cb);
}
else
{
flash_operation = this._chip_erase_program(progress_cb);
}
}
else if (this.flash.isDoubleBufferingSupported() && this.enable_double_buffering)
{
Trace.TraceInformation("Using double buffer page erase program");
flash_operation = this._page_erase_program_double_buffer(progress_cb);
}
else
{
flash_operation = this._page_erase_program(progress_cb);
}
this.flash.target.resetStopOnReset();
DateTime program_finish = DateTime.Now;
this.perf.program_time = program_finish - program_start;
this.perf.program_type = flash_operation.ToString();
Trace.TraceInformation("Programmed {0} bytes ({1} pages) at {2:0.00} kB/s", program_byte_count, this.page_list.Count, program_byte_count / 1024 / ((TimeSpan)this.perf.program_time).TotalSeconds);
return(this.perf);
}