public valmoWin()
{
try
{
DirectoryInfo dirUpgrade = new DirectoryInfo("upgrade");
DirectoryInfo dirBackup = new DirectoryInfo("backup");
DirectoryInfo dirIpr = new DirectoryInfo("ipr");
DirectoryInfo dirJpeg = new DirectoryInfo("jpeg");
DirectoryInfo dirRec = new DirectoryInfo("rec");
DirectoryInfo dirLns = new DirectoryInfo("lines");
if (!dirUpgrade.Exists)
{
dirUpgrade.Create();
}
if (!dirBackup.Exists)
{
dirBackup.Create();
}
if (!dirJpeg.Exists)
{
dirJpeg.Create();
}
if (!dirIpr.Exists)
{
dirIpr.Create();
}
if (!dirRec.Exists)
{
dirRec.Create();
}
if (!dirLns.Exists)
{
dirLns.Create();
}
dv.feedbackHandle = callbackObjLstFunc;
callbackObjLstHandle = new callBackObjEvent(callbackObjLstFunc);
execHandle = new execEvent(execInvoke);
execMsg = new execMsgEvent(execMsgFunc);
setPageToNrHandle = setPangetoNr;
setCurPageDisHandle = setCurPageDis;
SCurUser = dv.users.curUser;
InitializeComponent();
ctrlsObjInit();
setUnitResources(objUnit.unitBase[UnitType.Len_mm]);
setUnitResources(objUnit.unitBase[UnitType.Temp_C]);
setUnitResources(objUnit.unitBase[UnitType.Prs_Mpa]);
setUnitResources(objUnit.unitBase[UnitType.Force_ton]);
valmoWin.dv.SysPr[5].addHandle(handle_sys005, plcLstSpd.lowSpdType);
vm.getTm("-------- 1 ------------");
if (dv.getLink())
{
vm.getTm("-------- 2 ------------");
//开机时，检测报警灯是否是开着的状态。如果开着，需要将其关闭
if (valmoWin.dv.SysPr[187].valueNew == 1)
valmoWin.dv.SysPr[187].valueNew = 0;
//unitInit();
setUnitResources(objUnit.lenUnitBasic);
setUnitResources(objUnit.tempUnitBasic);
setUnitResources(objUnit.prsUnitBasic);
setUnitResources(objUnit.forceUnitBasic);
foreach (nullEvent func in lstStartUpInit)
{
func();
}
setPangetoNr(0);
}
else
{
execFunc(opeOrderType.winMsg, new WinMsg(WinMsgType.mwLinkPlcError));
}
vm.getTm("-------- 3 ------------");
checkUsbFunc();
lanCheck();
checkAccredit();
}
catch (Exception ex)
{
vm.perror(ex.ToString());
}
dv.SysPr[14].add();
BackstageTimer = new DispatcherTimer();
BackstageTimer.Interval = new TimeSpan(0, 0, 0, 0, 500);
BackstageTimer.Tick += new EventHandler(ClockTick);
BackstageTimer.Start();
lastEventTime = DateTime.Now;
valmoWin.BackstageClockTick += ScreenSaverTimer;
}
//2、添加新用户
//2、add new user
//先检查用户名是否已经存在
//如果不存在就保存到结构中，并写到文件中；
public int addUser(string name, string password, DateTime dt, byte level,string lan)
{
try
{
if (name == null || name == "")
return -2;//用户名错误
userClass userNew = getUserByName(name);
if (userNew != null) //该用户已经存在
return -1;
int userid = 76;
switch (level)
{
case 1:
{
userid = Properties.Settings.Default.opID;
userNew = new userClass(name, password, userid, dt, level);
Properties.Settings.Default.opID = userid + 1;
lstOp.Add(userNew);
saveToFile(1);
break;
}
case 2:
{
userid = Properties.Settings.Default.mtID;
userNew = new userClass(name, password, userid, dt, level);
userid = Properties.Settings.Default.mtID = userid + 1;
lstMt.Add(userNew);
saveToFile(2);
break;
}
case 3:
break;
}
vm.printLn("add new user ok！");
return 1;
//vm.printLn("name : {0} password : {1} userid : {2} createtime : {3} accessleve : {4} ", name, password, userid, dt, level);
}
catch (Exception ex)
{
vm.printLn(ex.ToString());
}
return 0;
}
/************************************************
* 方法
* 0、构造函数
* 1、匹配用户名、密码
* 2、添加新用户
* 3、删除一个用户
* 4、修改用户信息
************************************************/
//0、构造函数
//0、construct function
public userBase()
{
try
{
string processorID = hardware.getProcessorId();
if (processorID == Properties.Settings.Default.processorId)
{
string str = Properties.Settings.Default.root;
string[] strTmp = str.Split('\t');
//if (strTmp[0] == "root")
//{
userRoot = new userClass(strTmp[0], strTmp[1], Int32.Parse(strTmp[2]), new DateTime(2012, 3, 25, 0, 0, 0), 5);
//}
str = Properties.Settings.Default.ser;
strTmp = str.Split('\t');
//if (strTmp[0] == "ser")
//{
userSer = new userClass(strTmp[0], strTmp[1], Int32.Parse(strTmp[2]), new DateTime(2012, 3, 25, 0, 0, 0), 4);
//}
str = Properties.Settings.Default.mgr;
strTmp = str.Split('\t');
//if (strTmp[0] == "mgr")
//{
userMgr = new userClass(strTmp[0], strTmp[1], Int32.Parse(strTmp[2]), new DateTime(2012, 3, 25, 0, 0, 0), 3);
//}
str = Properties.Settings.Default.mt;
strTmp = str.Split('\t');
//if (strTmp[0] == "mt")
//{
userMt = new userClass(strTmp[0], strTmp[1], Int32.Parse(strTmp[2]), new DateTime(2012, 3, 25, 0, 0, 0), 2);
//}
str = Properties.Settings.Default.op;
strTmp = str.Split('\t');
//if (strTmp[0] == "op")
//{
userOp = new userClass(strTmp[0], strTmp[1], Int32.Parse(strTmp[2]), new DateTime(2012, 3, 25, 0, 0, 0), 1);
//}
str = Properties.Settings.Default.lstMt;
strTmp = str.Split('#');
int num = Int32.Parse(strTmp[0]);
if (strTmp.Length == num + 2)
{
for (int i = 1; i < num + 1; i++)
{
string[] strVar = strTmp[i].Split('\t');
lstMt.Add(new userClass(strVar[0], strVar[1], Int32.Parse(strVar[2]), DateTime.Parse(strVar[3]), Byte.Parse(strVar[4])));
}
}
str = Properties.Settings.Default.lstOp;
strTmp = str.Split('#');
num = Int32.Parse(strTmp[0]);
if (strTmp.Length == num + 2)
{
for (int i = 1; i < num + 1; i++)
{
string[] strVar = strTmp[i].Split('\t');
lstOp.Add(new userClass(strVar[0], strVar[1], Int32.Parse(strVar[2]), DateTime.Parse(strVar[3]), Byte.Parse(strVar[4])));
}
}
}
else
{
userRoot = new userClass("root", "Yehill", 5, new DateTime(2012, 3, 25, 0, 0, 0), 5);
userSer = new userClass("ser", "Action", 4, new DateTime(2012, 3, 25, 0, 0, 0), 4);
userMgr = new userClass("mgr", "2013", 3, new DateTime(2012, 3, 25, 0, 0, 0), 3);
userMt = new userClass("mt", "222", 2, new DateTime(2012, 3, 25, 0, 0, 0), 2);
userOp = new userClass("op", "111", 1, new DateTime(2012, 3, 25, 0, 0, 0), 1);
Properties.Settings.Default.root = userRoot.toString();
Properties.Settings.Default.ser = userSer.toString();
Properties.Settings.Default.mgr = userMgr.toString();
Properties.Settings.Default.mt = userMt.toString();
Properties.Settings.Default.op = userOp.toString();
Properties.Settings.Default.lstMt = "0#";
Properties.Settings.Default.lstOp = "0#";
Properties.Settings.Default.processorId = processorID;
Properties.Settings.Default.Save();
}
}
catch
{
}
userLiuzs = new userClass("liuzs","643",6,new DateTime(2012, 3, 25, 0, 0, 0), 3);
userNull = new userClass("guest", "null", 0, new DateTime(2012, 3, 25, 0, 0, 0), 0);
}
/// <summary>
/// 复制用户
/// </summary>
/// <param name="user_scr">源用户</param>
public void user_copy(userClass user_scr)
{
if (this == user_scr)
return;
name = user_scr.name;
user_password = user_scr.user_password;
user_userId = user_scr.user_userId;
user_createTime = user_scr.user_createTime;
user_accessLevel = user_scr.user_accessLevel;
user_language = user_scr.user_language;
}