internal PimSettingForm(Settings_Pim settings, List <int> list_)
{
this.settings = settings;
selectPort = list_;
InitializeComponent();
gbxFrequency.Visible = false;
}
private void btnAdd_Click(object sender, EventArgs e)
{//添加
m_isAdd = true;
btnAdd.Enabled = false;
btnSelect.Enabled = false;
//初始化方案
Settings_Pim sp = new Settings_Pim(m_listScript[0].settings.fileName);
m_listScript[0].settings.Clone(sp);
m_listScript.Add(new PimTestScript(sp));
int n = m_listScript.Count - 1;
sp.projectName = "BAND-" + n.ToString();
//刷新列表
listBoxProject.Items.Add(sp.projectName);
listBoxProject.SelectedIndex = m_listScript.Count - 1;
btnDel.Enabled = false;
listBoxProject.Enabled = false;
groupSettings.Enabled = true;
tbxName.Enabled = true;
btnModOk.Text = "确认";
btnModCancel.Enabled = true;
}
/// <summary>
/// 传递配置文件名称，
/// 依次为互调模块配置文件、频谱分析模块配置文件、
/// 隔离度模块配置文件、驻波比模块配置文件、二次谐波模块配置文件、
/// 射频功放的规格配置文件、仪表频率规划的配置文件
/// </summary>
/// <param name="fileNames"></param>
internal static void NewSettings(string[] fileNames)
{
//iso = new Settings_Iso(fileNames[2]);
//vsw = new Settings_Vsw(fileNames[3]);
//har = new Settings_Har(fileNames[4]);
sgn_1 = new Settings_Sgn(fileNames[0], "signal_1");
sgn_2 = new Settings_Sgn(fileNames[0], "signal_2");
pim = new Settings_Pim(fileNames[1]);
spc = new Settings_Spc(fileNames[2]);
spfc = new Specifics(fileNames[3]);
}
///<summary>
///获取指定的时间扫描数据
///</summary>
internal TimeSweepParam GetTimeSweepParam(Settings_Pim settings,
string filePath,
string gsm,
string mode,
int imOrder,
string cate,
float num)
{
TimeSweepParam tsp = new TimeSweepParam();
IniFile.SetFileName(filePath);
string name = GetName(gsm, mode, imOrder, cate);
tsp.F1 = float.Parse(IniFile.GetString(name, "tx1", "935"));
tsp.F2 = float.Parse(IniFile.GetString(name, "tx2", "960"));
tsp.Rx = float.Parse(IniFile.GetString(name, "rx", "910"));
if (App_Configure.Cnfgs.Cal_Use_Table)
{
//----------------------------------------
tsp.P1 = (float)settings.Tx + Tx_Tables.pim_rev_tx1.Offset(tsp.F1, settings.Tx, Tx_Tables.pim_rev_offset1);
tsp.P2 = (float)settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(tsp.F2, settings.Tx2, Tx_Tables.pim_rev_offset2);
//if (settings.PimSchema == ImSchema.REV)
//{
// tsp.P1 = (float)settings.Tx + Tx_Tables.pim_rev_tx1.Offset(tsp.F1, settings.Tx, Tx_Tables.pim_rev_offset1);
// tsp.P2 = (float)settings.Tx + Tx_Tables.pim_rev_tx2.Offset(tsp.F2, settings.Tx, Tx_Tables.pim_rev_offset2);
//}
//else
//{
// tsp.P1 = (float)settings.Tx + Tx_Tables.pim_frd_tx1.Offset(tsp.F1, settings.Tx, Tx_Tables.pim_frd_offset1);
// tsp.P2 = (float)settings.Tx + Tx_Tables.pim_frd_tx2.Offset(tsp.F2, settings.Tx, Tx_Tables.pim_frd_offset2);
//}
//----------------------------------------
}
else
{
tsp.P1 = (float)App_Factors.pim_tx1.ValueWithOffset(tsp.F1, settings.Tx);
tsp.P2 = (float)App_Factors.pim_tx2.ValueWithOffset(tsp.F2, settings.Tx2);
}
tsp.N1 = num;
return(tsp);
}
/// <summary>
/// 将对象深度拷贝到目标dest
/// </summary>
/// <param name="dest"></param>
internal void Clone(Settings_Pim dest)
{
if (dest != null)
{
dest.Tx = this.tx;
dest.Tx2 = this.tx2;
dest.F1 = this.f1;
dest.F2 = this.f2;
dest.F1s = this._f1s;
dest.F1e = this._f1e;
dest.F2s = this._f2s;
dest.F2e = this._f2e;
dest.Setp1 = this._setp1;
dest.Setp2 = this._setp2;
bool flag = false;
if (enableSquence == 1)
{
flag = true;
}
dest.EnableSquence = flag;
dest.PimSchema = (ImSchema)this.schema;
dest.Limit_Pim = this.limit;
dest.Vbw_Spc = this.vbw_spc;
dest.Rbw_Spc = this.rbw_spc;
dest.Att_Spc = this.att_spc;
dest.TimeSweepTimes = this.scanum1;
dest.TimeSweepPoints = this.scanum2;
dest.FreqSweepPoints = this.scanum3;
dest.FreqSweepTimes = this.scanum4;
dest.PimUnit = (ImUint)this.unit;
dest.PimOrder = (ImOrder)this.order;
dest.SweepType = (SweepType)this.mode;
dest.scanband = this.scanband;
dest.SpecDelay = this.SpecDelay;
dest.tsDelay = this.tsDelay;
dest.fsDelay = this.fsDelay;
}
}
public PimTestScript(Settings_Pim sp)
{
this.settings = sp;
result = "";
}
///<summary>
///获取不使用指定的时间扫描参数
///</summary>
/// <param name="order"></param>
/// <param name="num"></param>
/// <returns></returns>
internal TimeSweepParam TimeSweep(Settings_Pim settings, int order, int num)
{
int n, m;
m = (order - 1) / 2;
n = m + 1;
TimeSweepParam tsp = new TimeSweepParam();
tsp.F1 = settings.F1s;
tsp.F2 = settings.F2e;
if (App_Configure.Cnfgs.Cal_Use_Table)
{
//tsp.P1 = (float)settings.Tx + Tx_Tables.pim_rev_tx1.Offset(tsp.F1, settings.Tx, Tx_Tables.pim_rev_offset1);
//tsp.P2 = (float)settings.Tx + Tx_Tables.pim_rev_tx2.Offset(tsp.F2, settings.Tx, Tx_Tables.pim_rev_offset2);
//ygq
if (App_Configure.Cnfgs.Mode >= 2)
{
if (PimForm.port1_rev_fwd == 1 || PimForm.port1_rev_fwd == 2)
{
tsp.P1 = (float)settings.Tx + Tx_Tables.pim_rev_tx1.Offset(tsp.F1, settings.Tx, Tx_Tables.pim_rev_offset1);
tsp.P2 = (float)settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(tsp.F2, settings.Tx2, Tx_Tables.pim_rev_offset2);
}
else
{
tsp.P1 = (float)settings.Tx + Tx_Tables.pim_rev2_tx1.Offset(tsp.F1, settings.Tx, Tx_Tables.pim_rev2_offset1);
tsp.P2 = (float)settings.Tx2 + Tx_Tables.pim_rev2_tx2.Offset(tsp.F2, settings.Tx2, Tx_Tables.pim_rev2_offset2);
}
}
else
{
tsp.P1 = (float)settings.Tx + Tx_Tables.pim_rev_tx1.Offset(tsp.F1, settings.Tx, Tx_Tables.pim_rev_offset1);
tsp.P2 = (float)settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(tsp.F2, settings.Tx2, Tx_Tables.pim_rev_offset2);
}
//ygq
}
else
{
tsp.P1 = (float)App_Factors.pim_tx1.ValueWithOffset(tsp.F1, settings.Tx);
tsp.P2 = (float)App_Factors.pim_tx2.ValueWithOffset(tsp.F2, settings.Tx2);
}
if (App_Configure.Cnfgs.Mode >= 2)
{
if (PimForm.port1_rev_fwd == 1 || PimForm.port1_rev_fwd == 2)
{
tsp.Rx = n * tsp.F1 - m * tsp.F2;
}
else
{
tsp.Rx = m * tsp.F1 - n * tsp.F2;
}
}
else
{
if (App_Configure.Cnfgs.Mode == 1)
{
tsp.Rx = n * tsp.F1 - m * tsp.F2;
}
else if (App_Configure.Cnfgs.Mode == 0)
{
tsp.Rx = n * tsp.F2 - m * tsp.F1;
}
else
{
tsp.Rx = n * tsp.F1 - m * tsp.F2;
}
}
tsp.N = num;
return(tsp);
}
//#region 获取不指定的序列频率扫描数据
///// <summary>
///// 获取不指定的序列频率扫描数据
///// </summary>
///// <param name="order"></param>
///// <param name="i"></param>
///// <param name="num"></param>
//internal FreqSweepParam FreqSweep(Settings_Pim settings, int order)
//{
// int n, m;
// m = (order - 1) / 2;
// n = m + 1;
// FreqSweepParam fsp = new FreqSweepParam();
// float f1Ups = settings.F1s;
// float f1Upe = settings.F1e;
// float f2Fixed = settings.F2e;
// float f1Fixed = settings.F1s;
// float f2Ups = settings.F2s;
// float f2Upe = settings.F2e;
// float value = settings.Setp1;
// float value1 = settings.Setp2;
// int sn1 = Convert.ToInt32(Math.Ceiling((f1Upe - f1Ups) / value))+1;
// int sn2 = Convert.ToInt32(Math.Ceiling((f2Upe - f2Ups) / value1))+1;
// FreqSweepItem[] sweepItem1 = new FreqSweepItem[sn1];
// FreqSweepItem[] sweepItem2 = new FreqSweepItem[sn2];
// for (int j = 0; j < sn1; j++)
// {
// sweepItem1[j] = new FreqSweepItem();
// sweepItem1[j].Tx2 = f2Fixed;
// if (j == sn1 - 1)
// sweepItem1[j].Tx1 = f1Upe;
// else
// sweepItem1[j].Tx1 = j * value + f1Ups;
// float f3 = n * sweepItem1[j].Tx1 - m * sweepItem1[j].Tx2;
// float f4 = n * sweepItem1[j].Tx2 - m * sweepItem1[j].Tx1;
// if (f3 > f4 || f3 == f4)
// {
// sweepItem1[j].Rx = f4;
// }
// else
// sweepItem1[j].Rx = f3;
// if (App_Configure.Cnfgs.Cal_Use_Table)
// {
// //----------------------------------------
// sweepItem1[j].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem1[j].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
// sweepItem1[j].P2 = settings.Tx + Tx_Tables.pim_rev_tx2.Offset(sweepItem1[j].Tx2, settings.Tx, Tx_Tables.pim_rev_offset2);
// //----------------------------------------
// }
// else
// {
// sweepItem1[j].P1 = (float)App_Factors.pim_tx1.ValueWithOffset(sweepItem1[j].Tx1, settings.Tx);
// sweepItem1[j].P2 = (float)App_Factors.pim_tx2.ValueWithOffset(sweepItem1[j].Tx2, settings.Tx);
// }
// }
// for (int k = 0; k < sn2; k++)
// {
// sweepItem2[k] = new FreqSweepItem();
// sweepItem2[k].Tx1 = f1Fixed;
// if (k == sn2 - 1)
// sweepItem2[k].Tx2 = f2Ups;
// else
// sweepItem2[k].Tx2 = f2Upe - k * value1;
// float f5 = n * sweepItem2[k].Tx1 - m * sweepItem2[k].Tx2;
// float f6 = n * sweepItem2[k].Tx2 - m * sweepItem2[k].Tx1;
// if (f5 > f6 || f5 == f6)
// {
// sweepItem2[k].Rx = f6;
// }
// else
// sweepItem2[k].Rx = f5;
// if (App_Configure.Cnfgs.Cal_Use_Table)
// {
// //----------------------------------------
// sweepItem2[k].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem2[k].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
// sweepItem2[k].P2 = settings.Tx + Tx_Tables.pim_rev_tx2.Offset(sweepItem2[k].Tx2, settings.Tx, Tx_Tables.pim_rev_offset2);
// //----------------------------------------
// }
// else
// {
// sweepItem2[k].P1 = (float)App_Factors.pim_tx1.ValueWithOffset(sweepItem2[k].Tx1, settings.Tx);
// sweepItem2[k].P2 = (float)App_Factors.pim_tx2.ValueWithOffset(sweepItem2[k].Tx2, settings.Tx);
// }
// }
// fsp.Items1 = sweepItem1;
// fsp.Items2 = sweepItem2;
// return fsp;
//}
// #endregion
#region 获取不指定的序列频率扫描数据
/// <summary>
/// 获取不指定的序列频率扫描数据
/// </summary>
/// <param name="order"></param>
/// <param name="i"></param>
/// <param name="num"></param>
internal FreqSweepParam FreqSweep(Settings_Pim settings, int order, int i)
{
int n, m;
m = (order - 1) / 2;
n = m + 1;
FreqSweepParam fsp = new FreqSweepParam();
float f1Ups = settings.F1s;
float f1Upe = settings.F1e;
float f2Fixed = settings.F2e;
float f1Fixed = settings.F1s;
float f2Ups = settings.F2s;
float f2Upe = settings.F2e;
float value1 = settings.Setp1;
float value2 = settings.Setp2;
int sn1 = Convert.ToInt32(Math.Ceiling((f1Upe - f1Ups) / value1)) + 1;
int sn2 = Convert.ToInt32(Math.Ceiling((f2Upe - f2Ups) / value2)) + 1;
//if (sn1 == 0)
// sn1 = 1;
//if (sn2 == 0)
// sn2 = 1;
FreqSweepItem[] sweepItem1 = new FreqSweepItem[sn1];
FreqSweepItem[] sweepItem2 = new FreqSweepItem[sn2];
for (int j = 0; j < sn1; j++)
{
sweepItem1[j] = new FreqSweepItem();
sweepItem1[j].Tx2 = f2Fixed;
if (j == sn1 - 1)
{
sweepItem1[j].Tx1 = f1Upe;
}
else
{
sweepItem1[j].Tx1 = j * value1 + f1Ups;
}
//float f3 = n * sweepItem1[j].Tx1 - m * sweepItem1[j].Tx2;
//float f4 = n * sweepItem1[j].Tx2 - m * sweepItem1[j].Tx1;
//ygq
float f3 = 0;
float f4 = 0;
if (App_Configure.Cnfgs.Mode >= 2)
{
if (PimForm.port1_rev_fwd == 1 || PimForm.port1_rev_fwd == 2)
{
f3 = n * sweepItem1[j].Tx1 - m * sweepItem1[j].Tx2;
//f4 = n * sweepItem1[j].Tx2 - m * sweepItem1[j].Tx1;
}
else
{
f3 = n * sweepItem1[j].Tx2 - m * sweepItem1[j].Tx1;
}
}
else
{
if (App_Configure.Cnfgs.Mode == 1)
{
f3 = n * sweepItem1[j].Tx1 - m * sweepItem1[j].Tx2;
//f4 = n * sweepItem1[j].Tx2 - m * sweepItem1[j].Tx1;
}
else if (App_Configure.Cnfgs.Mode == 0)
{
f3 = n * sweepItem1[j].Tx2 - m * sweepItem1[j].Tx1;
}
else
{
f3 = n * sweepItem1[j].Tx1 - m * sweepItem1[j].Tx2;
}
}
//ygq
//if (f3 > f4 || f3 == f4)
//{
// sweepItem1[j].Rx = f4;
//}
//else
sweepItem1[j].Rx = f3;
if (App_Configure.Cnfgs.Cal_Use_Table)
{
//sweepItem1[j].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem1[j].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
//sweepItem1[j].P2 = settings.Tx + Tx_Tables.pim_rev_tx2.Offset(sweepItem1[j].Tx2, settings.Tx, Tx_Tables.pim_rev_offset2);
//ygq
if (PimForm.port1_rev_fwd == 1 || PimForm.port1_rev_fwd == 2)
{
sweepItem1[j].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem1[j].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
sweepItem1[j].P2 = settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(sweepItem1[j].Tx2, settings.Tx2, Tx_Tables.pim_rev_offset2);
}
else
{
sweepItem1[j].P1 = settings.Tx + Tx_Tables.pim_rev2_tx1.Offset(sweepItem1[j].Tx1, settings.Tx, Tx_Tables.pim_rev2_offset1);
sweepItem1[j].P2 = settings.Tx2 + Tx_Tables.pim_rev2_tx2.Offset(sweepItem1[j].Tx2, settings.Tx2, Tx_Tables.pim_rev2_offset2);
}
//ygq
}
else
{
sweepItem1[j].P1 = (float)App_Factors.pim_tx1.ValueWithOffset(sweepItem1[j].Tx1, settings.Tx);
sweepItem1[j].P2 = (float)App_Factors.pim_tx2.ValueWithOffset(sweepItem1[j].Tx2, settings.Tx2);
}
}
for (int k = 0; k < sn2; k++)
{
sweepItem2[k] = new FreqSweepItem();
sweepItem2[k].Tx1 = f1Fixed;
if (k == sn2 - 1)
{
sweepItem2[k].Tx2 = f2Ups;
}
else
{
sweepItem2[k].Tx2 = f2Upe - k * value2;
}
//float f5 = n * sweepItem2[k].Tx1 - m * sweepItem2[k].Tx2;
//float f6 = n * sweepItem2[k].Tx2 - m * sweepItem2[k].Tx1;
//ygq
float f5 = 0;
float f6 = 0;
if (App_Configure.Cnfgs.Mode >= 2)
{
if (PimForm.port1_rev_fwd == 1 || PimForm.port1_rev_fwd == 2)
{
f5 = n * sweepItem2[k].Tx1 - m * sweepItem2[k].Tx2;
//f6 = n * sweepItem2[k].Tx2 - m * sweepItem2[k].Tx1;
}
else
{
f5 = n * sweepItem2[k].Tx2 - m * sweepItem2[k].Tx1;
}
}
else
{
if (App_Configure.Cnfgs.Mode == 1)
{
f5 = n * sweepItem2[k].Tx1 - m * sweepItem2[k].Tx2;
//f6 = n * sweepItem2[k].Tx2 - m * sweepItem2[k].Tx1;
}
else if (App_Configure.Cnfgs.Mode == 0)
{
f5 = n * sweepItem2[k].Tx2 - m * sweepItem2[k].Tx1;
}
else
{
f5 = n * sweepItem2[k].Tx1 - m * sweepItem2[k].Tx2;
}
}
//ygq
//if (f5 > f6 || f5 == f6)
//{
// sweepItem2[k].Rx = f6;
//}
//else
sweepItem2[k].Rx = f5;
if (App_Configure.Cnfgs.Cal_Use_Table)
{
//sweepItem2[k].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem2[k].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
//sweepItem2[k].P2 = settings.Tx + Tx_Tables.pim_rev_tx2.Offset(sweepItem2[k].Tx2, settings.Tx, Tx_Tables.pim_rev_offset2);
//ygq
if (PimForm.port1_rev_fwd == 1 || PimForm.port1_rev_fwd == 2)
{
sweepItem2[k].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem2[k].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
sweepItem2[k].P2 = settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(sweepItem2[k].Tx2, settings.Tx2, Tx_Tables.pim_rev_offset2);
}
else
{
sweepItem2[k].P1 = settings.Tx + Tx_Tables.pim_rev2_tx1.Offset(sweepItem2[k].Tx1, settings.Tx, Tx_Tables.pim_rev2_offset1);
sweepItem2[k].P2 = settings.Tx2 + Tx_Tables.pim_rev2_tx2.Offset(sweepItem2[k].Tx2, settings.Tx2, Tx_Tables.pim_rev2_offset2);
}
//ygq
}
else
{
sweepItem2[k].P1 = (float)App_Factors.pim_tx1.ValueWithOffset(sweepItem2[k].Tx1, settings.Tx);
sweepItem2[k].P2 = (float)App_Factors.pim_tx2.ValueWithOffset(sweepItem2[k].Tx2, settings.Tx2);
}
}
fsp.Items1 = sweepItem1;
fsp.Items2 = sweepItem2;
return(fsp);
}
/// <summary>
/// 获取不指定的序列频率扫描数据
/// </summary>
/// <param name="order"></param>
/// <param name="i"></param>
/// <param name="num"></param>
internal FreqSweepParam FreqSweep(Settings_Pim settings, int order, int i, int num)
{
int n, m;
m = (order - 1) / 2;
n = m + 1;
FreqSweepParam fsp = new FreqSweepParam();
FreqSweepItem[] sweepItem1 = new FreqSweepItem[num];
FreqSweepItem[] sweepItem2 = new FreqSweepItem[num];
float f1Ups = App_Settings.spfc.ims[i].F1UpS;
float f2Fixed = App_Settings.spfc.ims[i].F2fixed;
float f1Fixed = App_Settings.spfc.ims[i].F1fixed;
float f2Dne = App_Settings.spfc.ims[i].F2DnE;
float ime = App_Settings.spfc.ims[i].ImE;
float ims = App_Settings.spfc.ims[i].ImS;
float value = (float)Math.Round((ime - ims) / (num - 1), 3);
for (int j = 0; j < num; j++)
{
sweepItem1[j] = new FreqSweepItem();
sweepItem2[j] = new FreqSweepItem();
sweepItem1[j].Tx2 = f2Fixed;
sweepItem1[j].Rx = ims + j * value;
sweepItem1[j].Tx1 = (float)Math.Round((m * sweepItem1[j].Tx2 + sweepItem1[j].Rx) / n, 1, MidpointRounding.AwayFromZero);
//sweepItem1[j].Rx = n * sweepItem1[j].Tx1 - m * sweepItem1[j].Tx2;
if (settings.IsHigh)//high-pim
{
sweepItem1[j].Rx = n * sweepItem1[j].Tx2 - m * sweepItem1[j].Tx1;
}
else
{
sweepItem1[j].Rx = n * sweepItem1[j].Tx1 - m * sweepItem1[j].Tx2;
}
sweepItem2[j].Tx1 = f1Fixed;
sweepItem2[j].Rx = ims + j * value;
sweepItem2[j].Tx2 = (float)Math.Round((n * sweepItem2[j].Tx1 - sweepItem2[j].Rx) / m, 1, MidpointRounding.AwayFromZero);
//sweepItem2[j].Rx = n * sweepItem2[j].Tx1 - m * sweepItem2[j].Tx2;
if (settings.IsHigh)//high-pim
{
sweepItem2[j].Rx = n * sweepItem2[j].Tx2 - m * sweepItem2[j].Tx1;
}
else
{
sweepItem2[j].Rx = n * sweepItem2[j].Tx1 - m * sweepItem2[j].Tx2;
}
if (App_Configure.Cnfgs.Cal_Use_Table)
{
//----------------------------------------
sweepItem1[j].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem1[j].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
sweepItem1[j].P2 = settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(sweepItem1[j].Tx2, settings.Tx2, Tx_Tables.pim_rev_offset2);
sweepItem2[j].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem2[j].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
sweepItem2[j].P2 = settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(sweepItem2[j].Tx2, settings.Tx2, Tx_Tables.pim_rev_offset2);
//if (settings.PimSchema == ImSchema.REV)
//{
// sweepItem1[j].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem1[j].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
// sweepItem1[j].P2 = settings.Tx + Tx_Tables.pim_rev_tx2.Offset(sweepItem1[j].Tx2, settings.Tx, Tx_Tables.pim_rev_offset2);
// sweepItem2[j].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem2[j].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
// sweepItem2[j].P2 = settings.Tx + Tx_Tables.pim_rev_tx2.Offset(sweepItem2[j].Tx2, settings.Tx, Tx_Tables.pim_rev_offset2);
//}
//else
//{
// sweepItem1[j].P1 = settings.Tx + Tx_Tables.pim_frd_tx1.Offset(sweepItem1[j].Tx1, settings.Tx, Tx_Tables.pim_frd_offset1);
// sweepItem1[j].P2 = settings.Tx + Tx_Tables.pim_frd_tx2.Offset(sweepItem1[j].Tx2, settings.Tx, Tx_Tables.pim_frd_offset2);
// sweepItem2[j].P1 = settings.Tx + Tx_Tables.pim_frd_tx1.Offset(sweepItem2[j].Tx1, settings.Tx, Tx_Tables.pim_frd_offset1);
// sweepItem2[j].P2 = settings.Tx + Tx_Tables.pim_frd_tx2.Offset(sweepItem2[j].Tx2, settings.Tx, Tx_Tables.pim_frd_offset2);
//}
//----------------------------------------
}
else
{
sweepItem1[j].P1 = (float)App_Factors.pim_tx1.ValueWithOffset(sweepItem1[j].Tx1, settings.Tx);
sweepItem1[j].P2 = (float)App_Factors.pim_tx2.ValueWithOffset(sweepItem1[j].Tx2, settings.Tx2);
sweepItem2[j].P1 = (float)App_Factors.pim_tx1.ValueWithOffset(sweepItem2[j].Tx1, settings.Tx);
sweepItem2[j].P2 = (float)App_Factors.pim_tx2.ValueWithOffset(sweepItem2[j].Tx2, settings.Tx2);
}
}
fsp.Items1 = sweepItem1;
fsp.Items2 = sweepItem2;
return(fsp);
}
/// <summary>
/// 获取指定的序列频率扫描数据
/// </summary>
/// <param name="filePath">读取的文件地址</param>
/// <param name="gsm"></param>
/// <param name="mode">REV，FWD</param>
/// <param name="imOder">阶数</param>
/// <param name="cate">fixed,sweep</param>
internal FreqSweepParam GetFreqSweepParam(Settings_Pim settings,
string filePath,
string gsm,
string mode,
string cate,
int imOrder)
{
IniFile.SetFileName(filePath);
string name = GetName(gsm, mode, imOrder, cate);
FreqSweepParam fsp = new FreqSweepParam();
FreqSweepItem[] sweepItem1 = null;
FreqSweepItem[] sweepItem2 = null;
string tx1_1 = IniFile.GetString(name, "tx1_1", "935");
string tx2_1 = IniFile.GetString(name, "tx2_1", "960");
string rx_1 = IniFile.GetString(name, "rx_1", "910");
string tx1_2 = IniFile.GetString(name, "tx1_2", "935");
string tx2_2 = IniFile.GetString(name, "tx2_2", "960");
string rx_2 = IniFile.GetString(name, "rx_2", "910");
string[] strTx1_1 = tx1_1.Split(char.Parse(","));
string[] strTx2_1 = tx2_1.Split(char.Parse(","));
string[] strRx_1 = rx_1.Split(char.Parse(","));
string[] strTx1_2 = tx1_2.Split(char.Parse(","));
string[] strTx2_2 = tx2_2.Split(char.Parse(","));
string[] strRx_2 = rx_2.Split(char.Parse(","));
sweepItem1 = new FreqSweepItem[strTx1_1.Length];
sweepItem2 = new FreqSweepItem[strTx1_2.Length];
for (int i = 0; i < strTx1_1.Length; i++)
{
sweepItem1[i] = new FreqSweepItem();
sweepItem1[i].Tx1 = float.Parse(strTx1_1[i]);
sweepItem1[i].Tx2 = float.Parse(strTx2_1[i]);
sweepItem1[i].Rx = float.Parse(strRx_1[i]);
sweepItem2[i] = new FreqSweepItem();
sweepItem2[i].Tx1 = float.Parse(strTx1_2[i]);
sweepItem2[i].Tx2 = float.Parse(strTx2_2[i]);
sweepItem2[i].Rx = float.Parse(strRx_2[i]);
if (App_Configure.Cnfgs.Cal_Use_Table)
{
//----------------------------------------
sweepItem1[i].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem1[i].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
sweepItem1[i].P2 = settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(sweepItem1[i].Tx2, settings.Tx2, Tx_Tables.pim_rev_offset2);
sweepItem2[i].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem2[i].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
sweepItem2[i].P2 = settings.Tx2 + Tx_Tables.pim_rev_tx2.Offset(sweepItem2[i].Tx2, settings.Tx2, Tx_Tables.pim_rev_offset2);
//if (settings.PimSchema == ImSchema.REV)
//{
// sweepItem1[i].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem1[i].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
// sweepItem1[i].P2 = settings.Tx + Tx_Tables.pim_rev_tx2.Offset(sweepItem1[i].Tx2, settings.Tx, Tx_Tables.pim_rev_offset2);
// sweepItem2[i].P1 = settings.Tx + Tx_Tables.pim_rev_tx1.Offset(sweepItem2[i].Tx1, settings.Tx, Tx_Tables.pim_rev_offset1);
// sweepItem2[i].P2 = settings.Tx + Tx_Tables.pim_rev_tx2.Offset(sweepItem2[i].Tx2, settings.Tx, Tx_Tables.pim_rev_offset2);
//}
//else
//{
// sweepItem1[i].P1 = settings.Tx + Tx_Tables.pim_frd_tx1.Offset(sweepItem1[i].Tx1, settings.Tx, Tx_Tables.pim_frd_offset1);
// sweepItem1[i].P2 = settings.Tx + Tx_Tables.pim_frd_tx2.Offset(sweepItem1[i].Tx2, settings.Tx, Tx_Tables.pim_frd_offset2);
// sweepItem2[i].P1 = settings.Tx + Tx_Tables.pim_frd_tx1.Offset(sweepItem2[i].Tx1, settings.Tx, Tx_Tables.pim_frd_offset1);
// sweepItem2[i].P2 = settings.Tx + Tx_Tables.pim_frd_tx2.Offset(sweepItem2[i].Tx2, settings.Tx, Tx_Tables.pim_frd_offset2);
//}
//----------------------------------------
}
else
{
sweepItem1[i].P1 = (float)App_Factors.pim_tx1.ValueWithOffset(sweepItem1[i].Tx1, settings.Tx);
sweepItem1[i].P2 = (float)App_Factors.pim_tx2.ValueWithOffset(sweepItem1[i].Tx2, settings.Tx2);
sweepItem2[i].P1 = (float)App_Factors.pim_tx1.ValueWithOffset(sweepItem2[i].Tx1, settings.Tx);
sweepItem2[i].P2 = (float)App_Factors.pim_tx2.ValueWithOffset(sweepItem2[i].Tx2, settings.Tx2);
}
}
fsp.Items1 = sweepItem1;
fsp.Items2 = sweepItem2;
return(fsp);
}
