public PolylineFeature(PolylineFeature feature)
{
m_oStyle = feature.m_oStyle;
m_oParts = new List<Part>();
foreach (Part part in feature.m_oParts)
{
Part newPart = new Part();
m_oParts.Add(newPart);
foreach (DPoint point in part.Points)
{
newPart.Points.Add(new DPoint(point));
}
}
}
/// <summary>
/// Casts a point onto polyline and returns location of its projection.
/// </summary>
/// <param name="feature">feature of polyline type</param>
/// <param name="part">part number to analyse</param>
/// <param name="x">point being cast x coord</param>
/// <param name="y">point being cast y coord</param>
/// <param name="a">normalized cast location along the polyline part [0..1]</param>
/// <param name="x_cast">cast x location on the polyline</param>
/// <param name="y_cast">cast y location on the polyline</param>
/// <param name="dDist">distance of point and polyline</param>
/// <param name="dPolyLen">calculated polyline length</param>
/// <param name="segNo">number of polyline segment that was closest (0-based)</param>
/// <param name="a_seg">normalized position within polyline segment (note that a_seg might be outside of 0..1 range). Value smaller than 0 or greater than 1 denotes, that point is cast to end point of segment.</param>
/// <param name="b_seg">distance from a line defined by polyline segment. Side is indicated by sign: positive for right side, negative for left side.</param>
public void castToPolyline(PolylineFeature feature, int part, double x, double y,
out double a, out double x_cast, out double y_cast,
out double dDist, out double dPolyLen,
out int segNo, out double a_seg, out double b_seg)
{
if (feature == null) throw new Exception("Invalid parameter: feature can not be null.");
if (part < 0 || part > feature.m_oParts.Count) throw new Exception("Invalid parameter: part.");
Part polylinePart = feature.m_oParts[part];
if (polylinePart.Points.Count == 0)
{
dDist = double.MaxValue;
a = 0;
x_cast = double.MaxValue;
y_cast = double.MaxValue;
dPolyLen = 0;
segNo = -1;
a_seg = 1;
b_seg = 1;
return;
}
double a_tmp, b_tmp;
double dSegLen;
double dDistMin = -1;
double dDistTmp = -1;
dDist = 0;
dPolyLen = 0;
a = 0;
a_seg = 0;
b_seg = 0;
segNo = 0;
x_cast = 0;
y_cast = 0;
for (int j = 1; j < polylinePart.Points.Count; j++)
{
double ax, ay, bx, by;
ax = polylinePart.Points[j - 1].X;
ay = polylinePart.Points[j - 1].Y;
bx = polylinePart.Points[j].X;
by = polylinePart.Points[j].Y;
dSegLen = Math.Sqrt((ax - bx) * (ax - bx) + (ay - by) * (ay - by));
if (dSegLen > 0)
{
// a=0..1 -> rzut punktu x jest miedzy poczatkiem i koncem odcinka ab
a_tmp = ((x - ax) * (bx - ax) + (y - ay) * (by - ay)) / ((bx - ax) * (bx - ax) + (by - ay) * (by - ay));
b_tmp = ((bx - ax) * (ay - y) - (by - ay) * (ax - x)) / dSegLen;
if (a_tmp > 0 && a_tmp < 1)
{ // policz odleglosc w rzucie do odcinka
dDistTmp = Math.Abs(b_tmp);
}
else if (a_tmp >= 1)
{
dDistTmp = Math.Sqrt((bx - x) * (bx - x) + (by - y) * (by - y));
}
else
{
dDistTmp = Math.Sqrt((ax - x) * (ax - x) + (ay - y) * (ay - y));
}
}
else
{
// ignore this segment
a_tmp = 0;
b_tmp = 0;
dDistTmp = Math.Sqrt((ax - x) * (ax - x) + (ay - y) * (ay - y));
}
if (dDistTmp < dDistMin || dDistMin == -1)
{
a_seg = a_tmp;
b_seg = b_tmp;
segNo = j - 1;
dDist = dDistTmp;
dDistMin = dDistTmp;
double dA_tmp;
dA_tmp = a_seg;
if (dA_tmp > 1) dA_tmp = 1;
if (dA_tmp < 0) dA_tmp = 0;
a = dPolyLen + dA_tmp * dSegLen;
}
dPolyLen += dSegLen;
}
if (dPolyLen == 0) throw new Exception("Polyline length can not be zero.");
a = a / dPolyLen;
{
double ax, ay, bx, by;
ax = polylinePart.Points[segNo].X;
ay = polylinePart.Points[segNo].Y;
bx = polylinePart.Points[segNo + 1].X;
by = polylinePart.Points[segNo + 1].Y;
if (a_seg >= 0 && a_seg <= 1)
{
x_cast = ax + (bx - ax) * a_seg;
y_cast = ay + (by - ay) * a_seg;
}
else if (a_seg < 0)
{
x_cast = ax;
y_cast = ay;
}
else if (a_seg > 1)
{
x_cast = bx;
y_cast = by;
}
}
}
public void recordAddFeature(PolylineFeature feature)
{
featuresContainer.addFeature(feature); // make feature attached
undoElementCurrent.addFeature(feature);
redoElements.Clear();
}
public void addFeature(PolylineFeature feature)
{
UndoElementPrimitive elem = new UndoElementPrimitive();
elem.featureAdded(feature);
undoPrimitives.Add(elem);
}
public void featureAdded(PolylineFeature feature)
{
operationType = UndoElementType.InsertFeature;
this.featureIndex = feature.FeatureID;
}
public override void KeyDown(object sender, KeyEventArgs e)
{
base.KeyDown(sender, e);
// delete selected features and points
if (e.KeyCode == Keys.Delete)
{
// delete selected points, split polyline into two where applicable
// start recording undo step
polylineLayer.Manager.startRecordingUndoElement();
symbolLayer.Manager.startRecordingUndoElement();
int count = polylineLayer.FeaturesCount;
for (int iFeature = count - 1; iFeature >= 0; iFeature--)
{
Feature feature = polylineLayer.FeatureGet(iFeature);
if (feature == null) continue;
if (feature.Selected)
{
// remove this polyliline and all related symbols
PolylineFeature poly = (PolylineFeature)feature;
for (int iPart = 0; iPart < poly.m_oParts.Count; iPart++)
{
Part part = poly.m_oParts[iPart];
for (int iPoint = 0; iPoint < part.Points.Count; iPoint++)
{
DPoint point = part.Points[iPoint];
symbolLayer.Manager.recordRemoveFeature((SymbolFeature)point.Tag);
}
}
polylineLayer.Manager.recordRemoveFeature((PolylineFeature)feature);
}
else
{
// building points of polyline
// select polyline points
if (feature is PolylineFeature)
{
PolylineFeature oP = (PolylineFeature)feature;
// if this polyline has selected point(s), it will be split
// calculate number of new polylines
int newPolylines = 0;
int partCount = oP.m_oParts.Count;
for (int iPart = partCount - 1; iPart >= 0; iPart--)
{
List<DPoint> points = oP.m_oParts[iPart].Points;
int pointCount = points.Count;
for (int iPoint = 1; iPoint < pointCount; iPoint++)
{
if (iPoint == 1)
{
newPolylines = (points[0].Selected ? 0 : 1);
}
if (points[iPoint - 1].Selected == true
&& points[iPoint].Selected == false)
{
newPolylines++;
}
}
}
if (newPolylines < 2)
{
// just modify existing polyline
int partCount1 = oP.m_oParts.Count;
for (int iPart = partCount1 - 1; iPart >= 0; iPart--)
{
List<DPoint> points = oP.m_oParts[iPart].Points;
int pointCount = points.Count;
for (int iPoint = pointCount - 1; iPoint >= 0; iPoint--)
{
if (points[iPoint].Selected)
{
symbolLayer.Manager.recordRemoveFeature((SymbolFeature)points[iPoint].Tag);
polylineLayer.Manager.recordRemovePoint(iFeature, iPart, iPoint);
}
}
if (points.Count == 0)
{
polylineLayer.Manager.recordRemovePart(iFeature, iPart);
}
}
if (oP.m_oParts.Count == 0)
{
polylineLayer.Manager.recordRemoveFeature((PolylineFeature)feature);
}
}
else
{
// add new polyline(s), delete original
PolylineFeature featureNew = null;
List<DPoint> newPoints = null;
// draw polyline points
int partCount1 = oP.m_oParts.Count;
for (int iPart = partCount1 - 1; iPart >= 0; iPart--)
{
List<DPoint> points = oP.m_oParts[iPart].Points;
int pointCount = points.Count;
for (int iPoint = 0; iPoint < pointCount; iPoint++)
{
if (points[iPoint].Selected)
{
if (newPoints != null)
{
featureNew = new PolylineFeature(newPoints, feature.Style);
polylineLayer.Manager.recordAddFeature(featureNew);
featureNew = null;
newPoints = null;
}
symbolLayer.Manager.recordRemoveFeature((SymbolFeature)points[iPoint].Tag);
}
else
{
if (newPoints == null) newPoints = new List<DPoint>();
newPoints.Add((DPoint)points[iPoint].Clone());
}
}
}
if (newPoints != null)
{
featureNew = new PolylineFeature(newPoints, feature.Style);
polylineLayer.Manager.recordAddFeature(featureNew);
featureNew = null;
newPoints = null;
}
polylineLayer.Manager.recordRemoveFeature(feature);
}
}
}
}
// finish recording undo step
polylineLayer.Manager.stopRecordingUndoElement();
symbolLayer.Manager.stopRecordingUndoElement();
// emit event
ToolUsed(this, new EventArgs());
}
// clear selection
MapControl.Globals.Instance.MapControl.InvalidateMap();
}
