public void conversionToJson(string filePath)
{//将dbc文件转换为JSON文件
FileStream fs = new FileStream(filePath, FileMode.Open, FileAccess.Read);
StreamReader sr = new StreamReader(fs, System.Text.Encoding.GetEncoding("GB2312"));
ToXml tx = new ToXml();
tx.cmarr = new List <CanMessageAndSignal>();
CanMessage tm;
CanMessageAndSignal cms = new CanMessageAndSignal();
string s;
List <CanSignal> cs = new List <CanSignal>();
//信号为ts，与之相对应
int[] signalnum = new int[100];// 每条CAN信息中的CAN Signal的数目 不能够超过99，这个数组熊1开始
while ((s = sr.ReadLine()) != null)
{
string[] arr = s.Split(' ');
int cnt = 0;
int snum = 0; // 每条CAN信息中的CAN Signal的数目
if (string.IsNullOrWhiteSpace(s))
{
cs = new List <CanSignal>();
continue;
}
else if (arr.Length == 5) //CAN message
{
// cs = new List<CanSignal>();
cms = new CanMessageAndSignal();
tm = new CanMessage();
cs = new List <CanSignal>();
cms.canm = tm;
cms.cansarr = cs;
tx.cmarr.Add(cms);
tm.CANmessageTAG = arr[0];
tm.mId = Convert.ToUInt32(arr[1]);
int n;//表示“：”在数组中的位置；
n = arr[2].IndexOf(':');
tm.messageName = arr[2].Substring(0, n);
tm.mSeparator = ":";
tm.DLC = Convert.ToInt32(arr[3]);
tm.mNodeName = arr[4];
signalnum[cnt] = snum; // 这个数组从1开始
cnt++;
snum = 0;
}
else
{
string[] arr1 = s.Trim().Split(' ');
CanSignal ts = new CanSignal();
ts.CANsignalTAG = arr1[0];
//Console.Write(arr1[0]);
//Console.Write(arr1[1]);
ts.signalName = arr1[1];
//Console.Write(arr1[2]);
ts.sSeparator = arr1[2];
ts.startToEnd = arr1[3];
ts.AB = arr1[4];
ts.CD = arr1[5];
ts.unit = arr1[6];
ts.sNodeName = arr1[8];
cs.Add(ts);
snum++;
}
}
if (!File.Exists(ConversiontoJsonPath))
{
string fn = ConversiontoJsonPath;
FileStream fs1 = new FileStream(ConversiontoJsonPath, FileMode.Create, FileAccess.Write);//创建写入文件
string tmp;
StreamWriter sw1 = new StreamWriter(fs1, System.Text.Encoding.GetEncoding("GB2312"));
if (tx != null && !string.IsNullOrEmpty(fn))
{
tmp = JsonConvert.SerializeObject(tx.cmarr, Newtonsoft.Json.Formatting.Indented);
sw1.WriteLine(tmp + "\n");
}
//sw.WriteLine(this.textBox3.Text.Trim() + "+" + this.textBox4.Text);//开始写入值
sw1.Close();
fs1.Close();
}
else
{
string fn = ConversiontoJsonPath;
FileStream fs1 = new FileStream(ConversiontoJsonPath, FileMode.Create, FileAccess.Write);//创建写入文件
string tmp;
StreamWriter sw1 = new StreamWriter(fs1, System.Text.Encoding.GetEncoding("GB2312"));
if (tx != null && !string.IsNullOrEmpty(fn))
{
tmp = JsonConvert.SerializeObject(tx.cmarr, Newtonsoft.Json.Formatting.Indented);
sw1.WriteLine(tmp + "\n");
/* 另一种方法，不过转换成的格式都集中在一行，不太智能
* System.Runtime.Serialization.Json.DataContractJsonSerializer serializer = new System.Runtime.Serialization.Json.DataContractJsonSerializer(tx.cmarr.GetType());
* using (MemoryStream ms = new MemoryStream())
* {
* serializer.WriteObject(ms, tx.cmarr);
* tmp = Encoding.UTF8.GetString(ms.ToArray());
* }
* sw1.WriteLine(tmp + "\n");*/
}
//sw.WriteLine(this.textBox3.Text.Trim() + "+" + this.textBox4.Text);//开始写入值
sw1.Close();
fs1.Close();
}
}
public void dbcPreprocess(string filePath)
{ //将dbc文件转换为XML文件
FileStream fs = new FileStream(filePath, FileMode.Open, FileAccess.Read);
StreamReader sr = new StreamReader(fs, System.Text.Encoding.GetEncoding("GB2312"));
ToXml tx = new ToXml();
tx.cmarr = new List <CanMessageAndSignal>();
CanMessage tm;
CanMessageAndSignal cms = new CanMessageAndSignal();
string s;
List <CanSignal> cs = new List <CanSignal>();
//信号为ts，与之相对应
int[] signalnum = new int[100]; // 每条CAN信息中的CAN Signal的数目 不能够超过99，这个数组熊1开始
int snum = 0; // 每条CAN信息中的CAN Signal的数目
int cnt = 0;
while ((s = sr.ReadLine()) != null)
{
string[] arr = s.Split(' ');
if (string.IsNullOrWhiteSpace(s))
{
cs = new List <CanSignal>();
continue;
}
else if (arr.Length == 5) //CAN message
{
// cs = new List<CanSignal>();
cms = new CanMessageAndSignal();
tm = new CanMessage();
cs = new List <CanSignal>();
cms.canm = tm;
cms.cansarr = cs;
tx.cmarr.Add(cms);
tm.CANmessageTAG = arr[0];
tm.mId = Convert.ToUInt32(arr[1]);
int n;//表示“：”在数组中的位置；
n = arr[2].IndexOf(':');
tm.messageName = arr[2].Substring(0, n);
tm.mSeparator = ":";
tm.DLC = Convert.ToInt32(arr[3]);
tm.mNodeName = arr[4];
signalnum[cnt] = snum; // 这个数组从1开始
cnt++;
snum = 0;
}
else
{
string[] arr1 = s.Trim().Split(' ');
CanSignal ts = new CanSignal();
ts.CANsignalTAG = arr1[0];
//Console.Write(arr1[0]);
//Console.Write(arr1[1]);
ts.signalName = arr1[1];
//Console.Write(arr1[2]);
ts.sSeparator = arr1[2];
ts.startToEnd = arr1[3];
ts.AB = arr1[4];
ts.CD = arr1[5];
ts.unit = arr1[6];
ts.sNodeName = arr1[8];
cs.Add(ts);
snum++;
}
}
signalnum[cnt] = snum; // 这个数组从1开始
/*int cancnt = 0;
* for(int i = 0; i < 100; i++)
* {
* if(signalnum[i] != 0)
* {
* cancnt++;
* }
* }*/
if (!File.Exists(ConversionPathEndConvert))
{
string fn = ConversionPathEndConvert;
FileStream fs1 = new FileStream(ConversionPathEndConvert, FileMode.Create, FileAccess.Write);//创建写入文件
StreamWriter sw = new StreamWriter(fs1, System.Text.Encoding.GetEncoding("GB2312"));
//StreamWriter sw1 = new StreamWriter(fs1);
int pointer = 1;
foreach (CanMessageAndSignal cmas in tx.cmarr)
{
CanMessage canm1 = new CanMessage();
canm1 = cmas.canm;
string ss;
ss = canm1.messageName + canm1.mSeparator + " " + canm1.mId + " " + canm1.DLC;
sw.WriteLine(ss);
sw.WriteLine(signalnum[pointer]);
sw.WriteLine();
pointer++;
foreach (CanSignal cs1 in cmas.cansarr)
{
string s1;
int m = cs1.AB.IndexOf(",");
int i = cs1.AB.Length;
int n = cs1.CD.IndexOf("|");
int j = cs1.CD.Length;
string a;
string b;
a = cs1.AB;
b = cs1.CD;
int p = cs1.startToEnd.IndexOf("|");
int q = cs1.startToEnd.IndexOf("@");
int r = cs1.startToEnd.Length;
s1 = cs1.signalName + " " + cs1.startToEnd.Substring(0, p) + " " + cs1.startToEnd.Substring(p + 1, q - p - 1) + " " + cs1.startToEnd.Substring(q + 1, r - q - 2) + " " + a.Substring(1, m - 1) + " " + a.Substring(m + 1, i + -m - 2) + " " + b.Substring(1, n - 1) + " " + b.Substring(n + 1, j - n - 2) + " " + cs1.unit;
sw.WriteLine(s1);
}
sw.WriteLine();
}
//sw.WriteLine(this.textBox3.Text.Trim() + "+" + this.textBox4.Text);//开始写入值
sw.Close();
fs1.Close();
}
else
{
string fn = ConversionPathEndConvert;
FileStream fs1 = new FileStream(ConversionPathEndConvert, FileMode.Create, FileAccess.Write);//创建写入文件
StreamWriter sw = new StreamWriter(fs1, System.Text.Encoding.GetEncoding("GB2312"));
//StreamWriter sw1 = new StreamWriter(fs1);
int pointer = 1;
foreach (CanMessageAndSignal cmas in tx.cmarr)
{
CanMessage canm1 = new CanMessage();
canm1 = cmas.canm;
string ss;
ss = canm1.messageName + canm1.mSeparator + " " + canm1.mId + " " + canm1.DLC;
sw.WriteLine(ss);
sw.WriteLine(signalnum[pointer]);
sw.WriteLine();
pointer++;
foreach (CanSignal cs1 in cmas.cansarr)
{
string s1;
int m = cs1.AB.IndexOf(",");
int i = cs1.AB.Length;
int n = cs1.CD.IndexOf("|");
int j = cs1.CD.Length;
string a;
string b;
a = cs1.AB;
b = cs1.CD;
int p = cs1.startToEnd.IndexOf("|");
int q = cs1.startToEnd.IndexOf("@");
int r = cs1.startToEnd.Length;
s1 = cs1.signalName + " " + cs1.startToEnd.Substring(0, p) + " " + cs1.startToEnd.Substring(p + 1, q - p - 1) + " " + cs1.startToEnd.Substring(q + 1, r - q - 2) + " " + a.Substring(1, m - 1) + " " + a.Substring(m + 1, i + -m - 2) + " " + b.Substring(1, n - 1) + " " + b.Substring(n + 1, j - n - 2) + " " + cs1.unit;
sw.WriteLine(s1);
}
sw.WriteLine();
}
//sw.WriteLine(this.textBox3.Text.Trim() + "+" + this.textBox4.Text);//开始写入值
sw.Close();
fs1.Close();
}
}
public void conversionToXml(string fileName)
{ //将dbc文件转换为XML文件
FileStream fs = new FileStream(fileName, FileMode.Open, FileAccess.Read);
StreamReader sr = new StreamReader(fs, System.Text.Encoding.GetEncoding("GB2312"));
ToXml tx = new ToXml();
tx.cmarr = new List <CanMessageAndSignal>();
CanMessage tm;
CanMessageAndSignal cms = new CanMessageAndSignal();
string s;
List <CanSignal> cs = new List <CanSignal>();
//信号为ts，与之相对应
int[] signalnum = new int [100]; // 每条CAN信息中的CAN Signal的数目 不能够超过99，这个数组熊1开始
int snum = 0; // 每条CAN信息中的CAN Signal的数目
int cnt = 0;
while ((s = sr.ReadLine()) != null)
{
string[] arr = s.Split(' ');
if (string.IsNullOrWhiteSpace(s))
{
cs = new List <CanSignal>();
continue;
}
else if (arr.Length == 5) //CAN message
{
// cs = new List<CanSignal>();
cms = new CanMessageAndSignal();
tm = new CanMessage();
cs = new List <CanSignal>();
cms.canm = tm;
cms.cansarr = cs;
tx.cmarr.Add(cms);
tm.CANmessageTAG = arr[0];
tm.mId = Convert.ToUInt32(arr[1]);
int n;//表示“：”在数组中的位置；
n = arr[2].IndexOf(':');
tm.messageName = arr[2].Substring(0, n);
tm.mSeparator = ":";
tm.DLC = Convert.ToInt32(arr[3]);
tm.mNodeName = arr[4];
signalnum[cnt] = snum; // 这个数组从1开始
cnt++;
snum = 0;
}
else
{
string[] arr1 = s.Trim().Split(' ');
CanSignal ts = new CanSignal();
ts.CANsignalTAG = arr1[0];
//Console.Write(arr1[0]);
//Console.Write(arr1[1]);
ts.signalName = arr1[1];
//Console.Write(arr1[2]);
ts.sSeparator = arr1[2];
ts.startToEnd = arr1[3];
ts.AB = arr1[4];
ts.CD = arr1[5];
ts.unit = arr1[6];
ts.sNodeName = arr1[8];
cs.Add(ts);
snum++;
}
}
signalnum[cnt] = snum; // 这个数组从1开始
if (!File.Exists(ConversionPath))
{
string fn = ConversionPath;
FileStream fs1 = new FileStream(ConversionPath, FileMode.Create, FileAccess.Write);//创建写入文件
//StreamWriter sw1 = new StreamWriter(fs1);
if (tx != null && !string.IsNullOrEmpty(fn))
{
using (StreamWriter sw1 = new StreamWriter(fs1, System.Text.Encoding.GetEncoding("GB2312")))
{
XmlSerializer xs = string.IsNullOrEmpty(null) ?
new XmlSerializer(tx.GetType()) :
new XmlSerializer(tx.GetType(), new XmlRootAttribute(null));
xs.Serialize(sw1, tx);
sw1.Close();
}
}
//sw.WriteLine(this.textBox3.Text.Trim() + "+" + this.textBox4.Text);//开始写入值
fs1.Close();
}
else
{
string fn = ConversionPath;
FileStream fs1 = new FileStream(ConversionPath, FileMode.Create, FileAccess.Write);//创建写入文件
//StreamWriter sw1 = new StreamWriter(fs1);
if (tx != null && !string.IsNullOrEmpty(fn))
{
using (StreamWriter sw1 = new StreamWriter(fs1, System.Text.Encoding.GetEncoding("GB2312")))
{
XmlSerializer xs = string.IsNullOrEmpty(null) ?
new XmlSerializer(tx.GetType()) :
new XmlSerializer(tx.GetType(), new XmlRootAttribute(null));
xs.Serialize(sw1, tx);
sw1.Close();
}
}
//sr.WriteLine(this.textBox3.Text.Trim() + "+" + this.textBox4.Text);//开始写入值
fs1.Close();
}
//int a = signalnum[1];
}
