public override void IfcParse(int propIndex, IPropertyValue value)
{
switch (propIndex)
{
case 0:
case 1:
case 2:
case 3:
base.IfcParse(propIndex, value);
break;
case 4:
_connectionGeometry = (IfcConnectionGeometry)value.EntityVal;
break;
case 5:
_relatingElement = (IfcElement)value.EntityVal;
break;
case 6:
_relatedElement = (IfcElement)value.EntityVal;
break;
default:
this.HandleUnexpectedAttribute(propIndex, value); break;
}
}
public override void Parse(int propIndex, IPropertyValue value, int[] nestedIndex)
{
switch (propIndex)
{
case 0:
case 1:
case 2:
case 3:
base.Parse(propIndex, value, nestedIndex);
return;
case 4:
_connectionGeometry = (IfcConnectionGeometry)(value.EntityVal);
return;
case 5:
_relatingElement = (IfcElement)(value.EntityVal);
return;
case 6:
_relatedElement = (IfcElement)(value.EntityVal);
return;
default:
throw new XbimParserException(string.Format("Attribute index {0} is out of range for {1}", propIndex + 1, GetType().Name.ToUpper()));
}
}
public override void Parse(int propIndex, IPropertyValue value, int[] nestedIndex)
{
switch (propIndex)
{
case 0:
case 1:
case 2:
case 3:
base.Parse(propIndex, value, nestedIndex);
return;
case 4:
_relatingSpace = (IfcSpace)(value.EntityVal);
return;
case 5:
_relatedBuildingElement = (IfcElement)(value.EntityVal);
return;
case 6:
_connectionGeometry = (IfcConnectionGeometry)(value.EntityVal);
return;
case 7:
_physicalOrVirtualBoundary = (IfcPhysicalOrVirtualEnum)System.Enum.Parse(typeof(IfcPhysicalOrVirtualEnum), value.EnumVal, true);
return;
case 8:
_internalOrExternalBoundary = (IfcInternalOrExternalEnum)System.Enum.Parse(typeof(IfcInternalOrExternalEnum), value.EnumVal, true);
return;
default:
throw new XbimParserException(string.Format("Attribute index {0} is out of range for {1}", propIndex + 1, GetType().Name.ToUpper()));
}
}
public AssetInfoType(IfcElement ifcElement, CoBieLiteHelper helper)
: this()
{
externalEntityName = helper.ExternalEntityName(ifcElement);
externalID = helper.ExternalEntityIdentity(ifcElement);
externalSystemName = helper.ExternalSystemName(ifcElement);
AssetName = ifcElement.Name;
AssetDescription = ifcElement.Description;
AssetSerialNumber = helper.GetCoBieProperty("AssetSerialNumber", ifcElement);
AssetInstallationDate = helper.GetCoBieProperty<DateTime>("AssetInstallationDate", ifcElement);
AssetInstallationDateSpecified = AssetInstallationDate != default(DateTime);
AssetInstalledModelNumber = helper.GetCoBieProperty("AssetInstalledModelNumber", ifcElement);
AssetWarrantyStartDate = helper.GetCoBieProperty<DateTime>("AssetWarrantyStartDate", ifcElement);
AssetWarrantyStartDateSpecified = AssetWarrantyStartDate != default(DateTime);
AssetStartDate = helper.GetCoBieProperty("AssetStartDate", ifcElement); //why isn't this a date in the schema?
AssetTagNumber = helper.GetCoBieProperty("AssetTagNumber", ifcElement);
AssetBarCode = helper.GetCoBieProperty("AssetBarCode", ifcElement);
AssetIdentifier = helper.GetCoBieProperty("AssetIdentifier", ifcElement);
AssetLocationDescription = helper.GetCoBieProperty("AssetLocationDescription", ifcElement);
//Attributes
var ifcAttributes = helper.GetAttributes(ifcElement);
if (ifcAttributes != null && ifcAttributes.Any())
AssetAttributes = new AttributeCollectionType { Attribute = ifcAttributes };
//System Assignments
List<IfcSystem> systems;
if (helper.SystemLookup.TryGetValue(ifcElement, out systems))
{
AssetSystemAssignments = new SystemAssignmentCollectionType { SystemAssignment = new List<SystemKeyType>(systems.Count) };
for (int i = 0; i < systems.Count; i++)
{
AssetSystemAssignments.SystemAssignment.Add(new SystemKeyType(systems[i], helper));
}
}
//Space Assignments
List<IfcSpace> spaces;
if (helper.SpaceAssetLookup.TryGetValue(ifcElement, out spaces))
{
AssetSpaceAssignments = new SpaceAssignmentCollectionType { SpaceAssignment = new List<SpaceKeyType>(spaces.Count) };
for (int i = 0; i < spaces.Count; i++)
{
AssetSpaceAssignments.SpaceAssignment.Add(new SpaceKeyType(spaces[i], helper));
}
}
//Issues
//Documents
}
public override void IfcParse(int propIndex, IPropertyValue value)
{
switch (propIndex)
{
case 0:
case 1:
case 2:
case 3:
base.IfcParse(propIndex, value);
break;
case 4:
_relatingPort = (IfcPort) value.EntityVal;
break;
case 5:
_relatedElement = (IfcElement) value.EntityVal;
break;
default:
this.HandleUnexpectedAttribute(propIndex, value); break;
}
}
public override void IfcParse(int propIndex, IPropertyValue value)
{
switch (propIndex)
{
case 0:
case 1:
case 2:
case 3:
base.IfcParse(propIndex, value);
break;
case 4:
_relatingBuildingElement = (IfcElement)value.EntityVal;
break;
case 5:
_relatedOpeningElement = (IfcFeatureElementSubtraction)value.EntityVal;
break;
default:
this.HandleUnexpectedAttribute(propIndex, value); break;
}
}
public override void IfcParse(int propIndex, IPropertyValue value)
{
switch (propIndex)
{
case 0:
case 1:
case 2:
case 3:
base.IfcParse(propIndex, value);
break;
case 4:
_relatingSpace = (IfcSpace)value.EntityVal;
break;
case 5:
_relatedBuildingElement = (IfcElement)value.EntityVal;
break;
case 6:
_connectionGeometry = (IfcConnectionGeometry)value.EntityVal;
break;
case 7:
_physicalOrVirtualBoundary =
(IfcPhysicalOrVirtualEnum)Enum.Parse(typeof(IfcPhysicalOrVirtualEnum), value.EnumVal, true);
break;
case 8:
_internalOrExternalBoundary =
(IfcInternalOrExternalEnum)Enum.Parse(typeof(IfcInternalOrExternalEnum), value.EnumVal, true);
break;
default:
this.HandleUnexpectedAttribute(propIndex, value); break;
}
}
private bool Covering(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcCovering ifcCovering = ifcElement as IfcCovering;
if (ifcCovering != null)
{
var ifcCoveringType = ifcCovering.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcCoveringType>(); //Excel cell ref A426
//Excel A276 to A285 id full range of the IfcCoveringTypeEnum which is a property of IfcCoveringType, so if we have ifcCoveringType.Any() then we have covered this requirement
if (ifcCoveringType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
//assume any covering is Architectural
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
}
return _mergeDefault;
}
private bool BuildingElementPart(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcBuildingElementPart ifcBuildingElementPart = ifcElement as IfcBuildingElementPart;
if (ifcBuildingElementPart != null)
{
//IfcCoolingTowerType is not a class of IfcBuildingElementType, but IfcEnergyConversionDeviceType so moved to EnergyConversionDevice() method
//IfcShadingDevice/IfcShadingDeviceType is Ifc 2x4, not supported at this time. A1093
}
return _mergeDefault;
}
private bool Window(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
//IfcWindow is Ifc 2x4 with IfcWindowTypeEnum property .PredefinedType , not supported at this time. A823
IfcWindow ifcWindow = ifcElement as IfcWindow;
if (ifcWindow != null)//A1389
{
//assume any window will want to be in Architectural
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
}
return _mergeDefault;
}
private bool DistributionFlowElement(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcDistributionFlowElement ifcDistributionFlowElement = ifcElement as IfcDistributionFlowElement;
if (ifcDistributionFlowElement != null)
{
//IfcTubeBundle is Ifc 2x4, not supported at this time. A1284
//as stored in Ifc 2x3
var ifcTubeBundleType = ifcDistributionFlowElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcTubeBundleType>(); //Excel cell ref A1284
//Excel A1282 to A1283 id full range of the IfcTubeBundleTypeEnum which is a property of IfcTubeBundleType, so if we have ifcTubeBundleType.Any() then we have covered this requirement
if (ifcTubeBundleType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
//IfcTankType is Ifc 2x4, IfcTankTypeEnum has more values, not supported at this time. A1252
//as stored in Ifc 2x3
var ifcTankType = ifcDistributionFlowElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcTankType>(); //Excel cell ref A1252
//Excel A1244 to A1251 id full range of the IfcTankTypeEnum(2x4) assume that 2x3 full values OK which is a property of IfcTankType, so if we have ifcTankType.Any() then we have covered this requirement
if (ifcTankType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//IfcFlowMeter is Ifc 2x4, IfcFlowMeterTypeEnum has less values, not supported at this time. A758
//as stored in Ifc 2x3
var ifcFlowMeterType = ifcDistributionFlowElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFlowMeterType>(); //Excel cell ref A758
//Excel A753 to A757 id full range of the IfcFlowMeterTypeEnum(2x4) assume that 2x3 full values OK which is a property of IfcFlowMeterType, so if we have IfcFlowMeterType.Any() then we have covered this requirement
if (ifcFlowMeterType.Any())
{
switch (ifcFlowMeterType.First().PredefinedType)
{
case IfcFlowMeterTypeEnum.ELECTRICMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
case IfcFlowMeterTypeEnum.ENERGYMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
case IfcFlowMeterTypeEnum.FLOWMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical); //assume this from name
case IfcFlowMeterTypeEnum.GASMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
case IfcFlowMeterTypeEnum.OILMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
case IfcFlowMeterTypeEnum.WATERMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Plumbing);
case IfcFlowMeterTypeEnum.USERDEFINED:
return _mergeDefault;
case IfcFlowMeterTypeEnum.NOTDEFINED:
return false;
default:
return _mergeDefault;
}
}
}
return _mergeDefault;
}
public override void IfcParse(int propIndex, IPropertyValue value)
{
switch (propIndex)
{
case 0:
case 1:
case 2:
case 3:
base.IfcParse(propIndex, value);
break;
case 4:
_relatingSpace = (IfcSpace) value.EntityVal;
break;
case 5:
_relatedBuildingElement = (IfcElement) value.EntityVal;
break;
case 6:
_connectionGeometry = (IfcConnectionGeometry) value.EntityVal;
break;
case 7:
_physicalOrVirtualBoundary =
(IfcPhysicalOrVirtualEnum) Enum.Parse(typeof (IfcPhysicalOrVirtualEnum), value.EnumVal, true);
break;
case 8:
_internalOrExternalBoundary =
(IfcInternalOrExternalEnum) Enum.Parse(typeof (IfcInternalOrExternalEnum), value.EnumVal, true);
break;
default:
this.HandleUnexpectedAttribute(propIndex, value); break;
}
}
public static bool HasBoundingElement(this IfcSpace space, IModel model, IfcElement element)
{
IfcRelSpaceBoundary relation =
model.Instances.Where<IfcRelSpaceBoundary>(
rel => rel.RelatingSpace == space && rel.RelatedBuildingElement == element).FirstOrDefault();
return relation != null;
}
private bool FlowMovingDevice(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcFlowMovingDevice ifcFlowMovingDevice = ifcElement as IfcFlowMovingDevice;
if (ifcFlowMovingDevice != null)
{
var ifcCompressorType = ifcFlowMovingDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcCompressorType>(); //Excel cell ref A219
//Excel A187 to A202 id full range of the IfcCompressorTypeEnum which is a property of IfcCompressorType, so if we have ifcCompressorType.Any() then we have covered this requirement
if (ifcCompressorType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcFanType = ifcFlowMovingDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFanType>(); //Excel cell ref A710
//Excel A702 to A709 id full range of the IfcFanTypeEnum which is a property of IfcFanType, so if we have ifcFanType.Any() then we have covered this requirement
if (ifcFanType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical );
var ifcPumpType = ifcFlowMovingDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcPumpType>(); //Excel cell ref A999
//Excel A991 to A998 id full range of the IfcPumpTypeEnum which is a property of IfcPumpType, so if we have ifcPumpType.Any() then we have covered this requirement
if (ifcPumpType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Plumbing | COBieMergeRoles.FireProtection);
}
return _mergeDefault;
}
/// <summary>
/// Add element relationship to a parent object
/// </summary>
/// <param name="ifcElement">IfcElement object</param>
/// <param name="spaceNames">Name used as key to find parent object</param>
private void AddElementRelationship(IfcElement ifcElement, string spaceNames)
{
spaceNames = spaceNames.ToLower().Trim();
IfcSpace ifcSpace = null;
IfcBuildingStorey ifcBuildingStorey = null;
//see if the full name is in spaces
ifcSpace = IfcSpaces.Where(space => space.Name.ToString().ToLower().Trim() == spaceNames).FirstOrDefault();
if (ifcSpace != null)
ifcSpace.AddElement(ifcElement);
else //not in spaces so try Floors
{
ifcBuildingStorey = IfcBuildingStoreys.Where(bs => bs.Name.ToString().ToLower().Trim() == spaceNames).FirstOrDefault();
if (ifcBuildingStorey != null)
ifcBuildingStorey.AddElement(ifcElement);
else //not in floors so see if the space names is a delimited list
{
char splitKey = GetSplitChar(spaceNames);
string[] spaceArray = spaceNames.Split(splitKey);
if (spaceArray.Count() > 1) //if one we have already tried above, if more than one then try each item
{
foreach (string spaceitem in spaceArray)
{
string spaceName = spaceitem.Trim();
ifcSpace = IfcSpaces.Where(space => space.Name.ToString().ToLower().Trim() == spaceName).FirstOrDefault();
if (ifcSpace != null)
ifcSpace.AddElement(ifcElement);
else
{
ifcBuildingStorey = IfcBuildingStoreys.Where(bs => bs.Name.ToString().ToLower().Trim() == spaceName).FirstOrDefault();
if (ifcBuildingStorey != null)
ifcBuildingStorey.AddElement(ifcElement);
else
GetBuilding().AddElement(ifcElement); //default to building, probably give incorrect bounding box as we do not know what the element parent was
}
}
}
else
{
GetBuilding().AddElement(ifcElement); //default to building, probably give incorrect bounding box as we do not know what the element parent was
}
}
}
}
private bool FlowTerminal(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcFlowTerminal ifcFlowTerminal = ifcElement as IfcFlowTerminal;
if (ifcFlowTerminal != null)
{
var ifcAirTerminalType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcAirTerminalType>(); //Excel cell ref E26
//Excel E21 to E25 part range of the IfcAirTerminalTypeEnum which is a property of IfcAirTerminalType, so if we have ifcAirTerminalType.Any() then we need to test the requirement
//Note: IfcAirTerminalTypeEnum.LOUVRE is Ifc 2x4, not supported
if (ifcAirTerminalType.Any())
{
//if (ifcAirTerminalType.Where(att => att.PredefinedType == IfcAirTerminalTypeEnum.DIFFUSER).Any())
// return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//if (ifcAirTerminalType.Where(att => att.PredefinedType == IfcAirTerminalTypeEnum.GRILLE).Any())
// return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//if (ifcAirTerminalType.Where(att => att.PredefinedType == IfcAirTerminalTypeEnum.REGISTER).Any())
// return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//if (ifcAirTerminalType.Where(att => att.PredefinedType == IfcAirTerminalTypeEnum.NOTDEFINED).Any())
// return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical); //as Ifc 2x4 covers all enumeration, assume Ifc 2x3 covers all enumeration
}
var ifcElectricApplianceType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcElectricApplianceType>(); //Excel cell ref E618
//Excel E594 to E617 part range of the ifcElectricApplianceTypeEnum which is a property of ifcElectricApplianceType, so if we have ifcElectricApplianceType.Any() then we need to test the requirement
if (ifcElectricApplianceType.Any()) //although not all are in Excel sheet, I will assume that all should be based on types!!
{
//assume any user defined is lightly to be in the same role as generic type will be electrical
return MatchRoles(fileRoles, COBieMergeRoles.Electrical); //as Ifc 2x4 covers all enumeration, assume Ifc 2x3 covers all enumeration
}
//IfcAirTerminalBox is Ifc 2x4, not supported at this time. A33
//Try search on type
var ifcAirTerminalBoxType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcAirTerminalBoxType>(); //Excel cell ref A33
//Excel A23 to A32 part range of the IfcAirTerminalBoxTypeEnum which is a property of IfcAirTerminalBoxType, so if we have ifcAirTerminalBoxType.Any() then we have covered this requirement
if (ifcAirTerminalBoxType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
}
//IfcAudioVisualAppliance and IfcAudioVisualApplianceType is Ifc 2x4, not supported at this time. A80
//IfcCommunicationsAppliance and IfcCommunicationsApplianceType is Ifc 2x4, not supported at this time. A183
//IfcMedicalDevice is Ifc 2x4, not supported at this time. A303
//IfcLamp is Ifc 2x4, not supported at this time. A876
//Try search on type
var ifcLampType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcLampType>(); //Excel cell ref A876
//Excel A866 to A875 part range of the IfcLampTypeEnum which is a property of IfcLampType, so if we have ifcLampType.Any() then we have covered this requirement
if (ifcLampType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
//IfcLightFixture is Ifc 2x4, not supported at this time. A883
//Try search on type
var ifcLightFixtureType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcLightFixtureType>(); //Excel cell ref A876
//Excel A866 to A875 part range of the IfcLightFixtureTypeEnum which is a property of IfcLightFixtureType, so if we have ifcLightFixtureType.Any() then we have covered this requirement
if (ifcLightFixtureType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
//IfcOutlet is Ifc 2x4, not supported at this time. A941
//Try search on type
var ifcOutletType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcOutletType>(); //Excel cell ref A941
//Excel A935 to A940 part range of the IfcOutletTypeEnum which is a property of IfcOutletType, so if we have ifcOutletType.Any() then we have covered this requirement
if (ifcOutletType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
//IfcSanitaryTerminal is Ifc 2x4, not supported at this time. A1058
//Try search on type
var ifcSanitaryTerminalType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcSanitaryTerminalType>(); //Excel cell ref A1058
//Excel A1047 to A1057 part range of the IfcSanitaryTerminalTypeEnum which is a property of IfcSanitaryTerminalType, so if we have ifcSanitaryTerminalType.Any() then we have covered this requirement
if (ifcSanitaryTerminalType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Plumbing);
}
//IfcStackTerminal is Ifc 2x4, not supported at this time. A1119
//Try search on type
var ifcStackTerminalType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcStackTerminalType>(); //Excel cell ref A1119
//Excel A1115 to A1118 part range of the IfcStackTerminalTypeEnum which is a property of IfcStackTerminalType, so if we have ifcStackTerminalType.Any() then we have covered this requirement
if (ifcStackTerminalType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
}
//IfcWasteTerminal is Ifc 2x4, not supported at this time. A1369
//Try search on type
var ifcWasteTerminalType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcWasteTerminalType>(); //Excel cell ref A1119
//Excel A1361 to A1368 part range of the IfcWasteTerminalTypeEnum which is a property of IfcWasteTerminalType, so if we have ifcWasteTerminalType.Any() then we have covered this requirement
if (ifcWasteTerminalType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Plumbing);
}
}
return _mergeDefault;
}
private bool FlowStorageDevice(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
IfcFlowStorageDevice ifcFlowStorageDevice = ifcElement as IfcFlowStorageDevice;
if (ifcFlowStorageDevice != null)
{
//IfcElectricFlowStorageDevice is Ifc 2x4, not supported at this time. A644,
//as stored in Ifc2x3
var ifcElectricFlowStorageDeviceType = ifcFlowStorageDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcElectricFlowStorageDeviceType>(); //Excel cell ref A644
//Excel A639 to A643 id full range of the IfcElectricFlowStorageDeviceType which is a property of IfcElectricFlowStorageDeviceType, so if we have ifcElectricFlowStorageDeviceType.Any() then we have covered this requirement
if (ifcElectricFlowStorageDeviceType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
return _mergeDefault;
}
private bool FlowTreatmentDevice(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
IfcFlowTreatmentDevice ifcFlowTreatmentDevice = ifcElement as IfcFlowTreatmentDevice;
if (ifcFlowTreatmentDevice != null)
{
//IfcFilter is Ifc 2x4, not supported at this time. A723
//as stored in Ifc 2x3
var ifcFilterType = ifcFlowTreatmentDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFilterType>(); //Excel cell ref A723
//Excel A716 to A722 id full range of the IfcFilterTypeEnum which is a property of IfcFilterType, so if we have ifcFilterType.Any() then we have covered this requirement
if (ifcFilterType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//IfcFireSuppressionTerminal is Ifc 2x4, not supported at this time. A733
//Try search on type
var ifcFireSuppressionTerminalType = ifcFlowTreatmentDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFireSuppressionTerminalType>(); //Excel cell ref A733
//Excel A716 to A722 id full range of the IfcFireSuppressionTerminalTypeEnum which is a property of IfcFireSuppressionTerminalType, so if we have ifcFireSuppressionTerminalType.Any() then we have covered this requirement
if (ifcFireSuppressionTerminalType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.FireProtection);
//IfcHumidifier is Ifc 2x4, not supported at this time. A850
//Try search on type
var ifcHumidifierType = ifcFlowTreatmentDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcHumidifierType>(); //Excel cell ref A850
//Excel A935 to A849 id full range of the IffcHumidifierTypeEnum which is a property of IfcHumidifierType, so if we have ifcFireSuppressionTerminalType.Any() then we have covered this requirement
if (ifcHumidifierType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
}
return _mergeDefault;
}
private bool FurnishingElement(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
IfcFurnishingElement ifcFurnishingElement = ifcElement as IfcFurnishingElement;
if (ifcFurnishingElement != null)
{
//IfcFurniture is Ifc 2x4, not supported at this time. A823
//as stored in Ifc 2x3
var ifcFurnitureType = ifcFurnishingElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFurnitureType>(); //Excel cell ref A723
if (ifcFurnitureType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
//IfcSystemFurnitureElement is Ifc 2x4, not supported at this time. A828
//as stored in Ifc 2x3
var ifcSystemFurnitureElementType = ifcFurnishingElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcSystemFurnitureElementType>(); //Excel cell ref A723
if (ifcSystemFurnitureElementType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
}
return _mergeDefault;
}
private bool Roof(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcRoof ifcRoof = ifcElement as IfcRoof;
if (ifcRoof != null)//A1045
{
//no type Ifc entity, here the IfcRoofTypeEnum is the ShapeType property of the ifcRoof
//Excel A1030 to A1044 id full range of the IfcRoofTypeEnum then we have covered this requirement
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
}
return _mergeDefault;
}
private bool DistributionControlElement(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcDistributionControlElement ifcDistributionControlElement = ifcElement as IfcDistributionControlElement;
if (ifcDistributionControlElement != null) //Excel row 3 to 11, 12 to 13 is Ifc2x4 which is not implemented in Xbim at this time
{
var ifcActuatorType = ifcDistributionControlElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcActuatorType>(); //Excel cell ref E4
//Excel A6 to A11 id full range of the IfcActuatorTypeEnum which is a property of IfcActuatorType, so if we have ifcActuatorType.Any() then we have covered this requirement
if (ifcActuatorType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical | COBieMergeRoles.Plumbing | COBieMergeRoles.FireProtection);
//IfcDistributionControlElementType is ignored as this is the parent class of the ifcAlarmType, IfcActuatorType, IfcControllerType, IfcSensorType and IfcFlowInstrumentType (IfcFlowInstrumentType, which has no reference in excel sheet)
var ifcAlarmType = ifcDistributionControlElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcAlarmType>(); //Excel cell ref E43
//Excel A50 to A57 id full range of the IfcAlarmTypeEnum which is a property of IfcAlarmType, so if we have ifcAlarmType.Any() then we have covered this requirement
if (ifcAlarmType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical | COBieMergeRoles.FireProtection);
//IfcDistributionControlElementType see note above
var ifcControllerType = ifcDistributionControlElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcControllerType>(); //Excel cell ref E241
//Excel A242 to A249 id full range of the IfcControllerTypeEnum which is a property of IfcControllerType, so if we have ifcControllerType.Any() then we have covered this requirement
if (ifcControllerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical | COBieMergeRoles.Plumbing | COBieMergeRoles.FireProtection);
//down as ? in excel sheet, but assume this i think A751
var ifcFlowInstrumentType = ifcDistributionControlElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFlowInstrumentType>(); //Excel cell ref E751
//Excel A742 to A750 id full range of the IfcFlowInstrumentTypeEnum which is a property of IfcFlowInstrumentType, so if we have ifcFlowInstrumentType.Any() then we have covered this requirement
if (ifcFlowInstrumentType.Any())
{
switch (ifcFlowInstrumentType.First().PredefinedType)
{
case IfcFlowInstrumentTypeEnum.PRESSUREGAUGE:
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
case IfcFlowInstrumentTypeEnum.THERMOMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
case IfcFlowInstrumentTypeEnum.AMMETER:
case IfcFlowInstrumentTypeEnum.FREQUENCYMETER:
case IfcFlowInstrumentTypeEnum.POWERFACTORMETER:
case IfcFlowInstrumentTypeEnum.PHASEANGLEMETER:
case IfcFlowInstrumentTypeEnum.VOLTMETER_PEAK:
case IfcFlowInstrumentTypeEnum.VOLTMETER_RMS:
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
case IfcFlowInstrumentTypeEnum.NOTDEFINED:
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
case IfcFlowInstrumentTypeEnum.USERDEFINED:
return _mergeDefault;
default:
return _mergeDefault;
}
}
//IfcDistributionControlElementType see note above
var ifcSensorType = ifcDistributionControlElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcSensorType>(); //Excel cell ref E241
//Excel E1060 to E1080 , CONDUCTANCESENSOR, CONTACTSENSOR, IONCONCENTRATIONSENSOR, LEVELSENSOR, PHSENSOR, RADIATIONSENSOR, RADIOACTIVITYSENSOR, WINDSENSOR - IFC2x4(not supported)
//sheet shows nothing for IFC2x3, assumed that if the IfcSensorTypeEnum (ifc2x3) contains any of the ifc2x4 items that the rule would hold.
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.FIRESENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.FireProtection);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.FLOWSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.GASSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.HEATSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.FireProtection);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.HUMIDITYSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.LIGHTSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.MOISTURESENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.MOVEMENTSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.PRESSURESENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.SMOKESENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.SOUNDSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical | COBieMergeRoles.FireProtection);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.TEMPERATURESENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical );
//assume if any flow controller is attached then set roles below
var ifcFlowControllers = ifcDistributionControlElement.AssignedToFlowElement.Select(rfcl => rfcl.RelatingFlowElement).OfType<IfcFlowController>(); //Excel cell ref E3
if (ifcFlowControllers.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical | COBieMergeRoles.Plumbing | COBieMergeRoles.FireProtection);
}
return _mergeDefault;
}
public static void AddBoundingElement(this IfcSpace space, IModel model, IfcElement element,
IfcPhysicalOrVirtualEnum physicalOrVirtualBoundary,
IfcInternalOrExternalEnum internalOrExternalBoundary)
{
//avoid adding element which is already defined as bounding element
if (space.HasBoundingElement(model, element)) return;
IfcRelSpaceBoundary relation = model.Instances.New<IfcRelSpaceBoundary>(rel =>
{
rel.RelatingSpace = space;
rel.InternalOrExternalBoundary =
internalOrExternalBoundary;
rel.RelatedBuildingElement = element;
rel.PhysicalOrVirtualBoundary =
physicalOrVirtualBoundary;
});
}
public bool Merge(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
Type ifcType = ifcElement.GetType();
if (FilterTypes.Contains(ifcType)) //ok we have possible merge
{
switch (ifcType.Name)
{
case "IfcBuildingElementPart":
return BuildingElementPart(ifcElement, fileRoles);
case "IfcCovering":
return Covering(ifcElement, fileRoles);
case "IfcDistributionControlElement":
return DistributionControlElement(ifcElement, fileRoles);
case "IfcDistributionFlowElement":
return DistributionFlowElement(ifcElement, fileRoles);
case "IfcDoor":
return Door(ifcElement, fileRoles);
case "IfcEnergyConversionDevice":
return EnergyConversionDevice(ifcElement, fileRoles);
case "IfcFlowController":
case "IfcElectricDistributionPoint": //specific flow controller;
return FlowController(ifcElement, fileRoles);
case "IfcFlowFitting":
return FlowFitting(ifcElement, fileRoles);
case "IfcFlowMovingDevice":
return FlowMovingDevice(ifcElement, fileRoles);
case "IfcFlowStorageDevice":
return FlowStorageDevice(ifcElement, fileRoles);
case "IfcFlowTerminal":
return FlowTerminal(ifcElement, fileRoles);
case "IfcFlowTreatmentDevice":
return FlowTreatmentDevice(ifcElement, fileRoles);
case "IfcFurnishingElement":
return FurnishingElement(ifcElement, fileRoles);
case "IfcRoof":
return Roof(ifcElement, fileRoles);
case "IfcWindow":
return Window(ifcElement, fileRoles);
case "IfcTransportElement":
return TransportElement(ifcElement, fileRoles);
default:
return false;
}
}
return true; //not a filter type so ok to add
}
private bool FlowController(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcFlowController ifcFlowController = ifcElement as IfcFlowController;
if (ifcFlowController != null)
{
List<string> testStrings = new List<string>(){"Facility Lightning Protection", "Circuit", "Switch"};
var ifcDamperType = ifcFlowController.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcDamperType>(); //Excel cell ref E463
//Excel A437 to A449 id full range of the IfcDamperTypeEnum which is a property of IfcDamperType, so if we have ifcDamperType.Any() then we have covered this requirement
if (ifcDamperType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//Excel A622 to A631 id full range of the IfcElectricDistributionPointEnum which is a property of IfcElectricDistributionPoint, so if we have a IfcElectricDistributionPoint then we have covered this requirement
if (ifcFlowController is IfcElectricDistributionPoint)//Excel cell ref E637
{
IfcElectricDistributionPoint ifcElectricDistributionPoint = (IfcElectricDistributionPoint)ifcFlowController;
//Excel cell ref E738
if (ifcElectricDistributionPoint.DistributionPointFunction == IfcElectricDistributionPointFunctionEnum.USERDEFINED)
{
if ((!string.IsNullOrEmpty(ifcElectricDistributionPoint.UserDefinedFunction)) &&
testStrings.Contains(ifcElectricDistributionPoint.UserDefinedFunction)
)
{
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
else
return false;
}
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
var ifcElectricTimeControlType = ifcFlowController.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcElectricTimeControlType>(); //Excel cell ref E665
//Excel A660 to A664 id full range of the IfcElectricTimeControlTypeEnum which is a property of IfcElectricTimeControlType, so if we have ifcElectricTimeControlType.Any() then we have covered this requirement
if (ifcElectricTimeControlType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
var ifcProtectiveDeviceType = ifcFlowController.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcProtectiveDeviceType>(); //Excel cell ref E982
//Excel A973 to A981 id full range of the IfcProtectiveDeviceTypeEnum which is a property of IfcProtectiveDeviceType, so if we have ifcProtectiveDeviceType.Any() then we have covered this requirement
//note Ifc 2x4 has EARTHLEAKAGECIRCUITBREAKER, EARTHINGSWITCH but Ifc 2x3 has EARTHFAILUREDEVICE, assume this equals the Ifc 2x4 requirement
if (ifcProtectiveDeviceType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
//IfcProtectiveDeviceTrippingUnitType is Ifc 2x4, not supported at this time. E989
var ifcSwitchingDeviceType = ifcFlowController.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcSwitchingDeviceType>(); //Excel cell ref E1153
//Excel A1148 to A1158 id full range of the IfcSwitchingDeviceTypeEnum which is a property of IfcSwitchingDeviceType, so if we have ifcSwitchingDeviceType.Any() then we have covered this requirement
//note Ifc 2x4 has DIMMERSWITCH, KEYPAD, MOMENTARYSWITCH, SELECTORSWITCH not supported
if (ifcSwitchingDeviceType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
//IfcUnitaryControlElement/IfcUnitaryControlElementType is Ifc 2x4, not supported at this time.A1235
//IfcValve is Ifc 2x4, not supported at this time. A1327
//try Ifc2x3 type
var ifcValveType = ifcFlowController.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcValveType>(); //Excel cell ref A1327
//Excel A1305 to A1326 id full range of the IfcValveTypeEnum which is a property of IfcValveType, so if we have ifcValveType.Any() then we have covered this requirement
if (ifcValveType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Plumbing | COBieMergeRoles.FireProtection);
}
return _mergeDefault;
}
public override void IfcParse(int propIndex, IPropertyValue value)
{
switch (propIndex)
{
case 0:
case 1:
case 2:
case 3:
base.IfcParse(propIndex, value);
break;
case 4:
_relatingBuildingElement = (IfcElement) value.EntityVal;
break;
case 5:
_relatedOpeningElement = (IfcFeatureElementSubtraction) value.EntityVal;
break;
default:
this.HandleUnexpectedAttribute(propIndex, value); break;
}
}
private bool EnergyConversionDevice(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcEnergyConversionDevice ifcEnergyConversionDevice = ifcElement as IfcEnergyConversionDevice;
if (ifcEnergyConversionDevice != null)
{
List<string> testStrings = new List<string>() { "Furnaces", "Fuel-Fired Heaters", "Heat Exchangers for HVAC", "Refrigerant Condensers", "Packaged Water Chillers", "Cooling Towers", "Evaporative Air-Cooling Equipment" }; //A667 to A673
var ifcEnergyConversionDeviceType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcEnergyConversionDeviceType>(); //Excel cell ref A674
if (ifcEnergyConversionDeviceType.Where(ecdt => testStrings.Contains(ecdt.ElementType)).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcAirToAirHeatRecoveryType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcAirToAirHeatRecoveryType>(); //Excel cell ref A46
//Excel A36 to A45 id full range of the IfcAirToAirHeatRecoveryTypeEnum which is a property of IfcAirToAirHeatRecoveryType, so if we have ifcAirToAirHeatRecoveryType.Any() then we have this requirement
if (ifcAirToAirHeatRecoveryType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcBoilerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcBoilerType>(); //Excel cell ref A88
//Excel A91 to A34 id full range of the IfcBoilerTypeEnum which is a property of IfcBoilerType, so if we have ifcBoilerType.Any() then we have this requirement
if (ifcBoilerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//IfcBurnerType is Ifc 2x4, not supported at this time. A107
var ifcChillerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcChillerType>(); //Excel cell ref A144
//Excel A135 to A139 id full range of the IfcChillerTypeEnum which is a property of IfcChillerType, so if we have IfcChillerType.Any() then we have this requirement
if (ifcChillerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcCoilType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcCoilType>(); //Excel cell ref A165
//Excel A143 to A156 id full range of the IfcCoilTypeEnum which is a property of IfcCoilType, so if we have IfcCoilType.Any() then we have this requirement
if (ifcCoilType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcCondenserType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcCondenserType>(); //Excel cell ref A238
//Excel A222 to A223 id full range of the IfcCondenserTypeEnum which is a property of IfcCondenserType, so if we have ifcCondenserType.Any() then we have this requirement
if (ifcCondenserType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcElectricGeneratorType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcElectricGeneratorType>(); //Excel cell ref A650
//Excel A646 to A649 id full range of the IfcElectricGeneratorTypeEnum which is a property of IfcElectricGeneratorType, so if we have ifcElectricGeneratorType.Any() then we have this requirement
if (ifcElectricGeneratorType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
var ifcElectricMotorType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcElectricMotorType>(); //Excel cell ref A650
//Excel A652 to A657 id full range of the IfcElectricMotorTypeEnum which is a property of IfcElectricMotorType, so if we have ifcElectricMotorType.Any() then we have this requirement
if (ifcElectricMotorType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
//IfcEngineType is Ifc 2x4, not supported at this time. A673
var ifcEvaporativeCoolerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcEvaporativeCoolerType>(); //Excel cell ref A691
//Excel A681 to A690 id full range of the IfcEvaporativeCoolerTypeEnum which is a property of IfcEvaporativeCoolerType, so if we have ifcEvaporativeCoolerType.Any() then we have this requirement
if (ifcEvaporativeCoolerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcEvaporatorType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcEvaporatorType>(); //Excel cell ref A700
//Excel A693 to A699 id full range of the IfcEvaporatorTypeEnum which is a property of IfcEvaporatorType, so if we have ifcEvaporatorType.Any() then we have this requirement
if (ifcEvaporatorType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcMotorConnectionType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcMotorConnectionType>(); //Excel cell ref A933
//Excel A929 to A932 id full range of the IfcMotorConnectionTypeEnum which is a property of IfcMotorConnectionType, so if we have ifcMotorConnectionType.Any() then we have this requirement
if (ifcMotorConnectionType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//IfcSolarDeviceType is Ifc 2x4, not supported at this time. A1108
//IfcSpaceHeater is Ifc 2x4, not supported at this time. A1113
var ifcTransformerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcTransformerType>(); //Excel cell ref A1260
//Excel A1254 to A1259 id full range of the IfcTransformerTypeEnum which is a property of IfcTransformerType, so if we have ifcTransformerType.Any() then we have this requirement
if (ifcTransformerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
var ifcUnitaryEquipmentType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcUnitaryEquipmentType>(); //Excel cell ref A1303
//Excel A1297 to A1302 id full range of the IfcUnitaryEquipmentTypeEnum which is a property of IfcUnitaryEquipmentType, so if we have ifcUnitaryEquipmentType.Any() then we have this requirement
if (ifcUnitaryEquipmentType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
var ifcHeatExchangerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcHeatExchangerType>(); //Excel cell ref A833
//Excel A830 to A832 id full range of the IfcHeatExchangerTypeEnum which is a property ofIfcHeatExchangerType so if we have ifcHeatExchangerType.Any() then we have this requirement
if (ifcHeatExchangerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcCoolingTowerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcCoolingTowerType>(); //Excel cell ref A272
//Excel A263 to A267 id full range of the IfcCoolingTowerTypeEnum which is a property of IfcCoolingTowerType, so if we have ifcCoolingTowerType.Any() then we have this requirement
if (ifcCoolingTowerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
}
return _mergeDefault;
}
/// <summary>
/// Add the IfcRelConnectsPorts to the model
/// </summary>
/// <param name="realizingElement">List of IfcElement names</param>
/// <param name="relatingPort">List of IfcPort Names</param>
/// <param name="relatedPort">List of IfcPort Names</param>
private void AddRelConnectsPorts(string realizingElement, string relatingPort, string relatedPort, IfcElement relatingElement, IfcElement relatedElement)
{
if (ValidateString(realizingElement) &&
ValidateString(relatingPort) &&
ValidateString(relatedPort)
)
{
List<string> realizingElementList = SplitTheString(realizingElement);
List<string> relatingPortList = SplitTheString(relatingPort);
List<string> relatedPortList = SplitTheString(relatedPort);
//check we have equal count for each list, if not we cannot create IfcRelConnectsPorts
if (relatedPortList.Count() == relatingPortList.Count())
{
for (int i = 0; i < relatedPortList.Count(); i++)
{
IfcDistributionPort ifcPortRelated = Model.Instances.New<IfcDistributionPort>(p => {p.Name = relatedPortList[i]; });
IfcDistributionPort ifcPortRelating = Model.Instances.New<IfcDistributionPort>(p => { p.Name = relatingPortList[i]; });
IfcRelConnectsPorts ifcRelConnectsPorts = Model.Instances.New<IfcRelConnectsPorts>(rcp =>
{
rcp.RelatedPort = ifcPortRelated;
rcp.RelatingPort = ifcPortRelating;
});
//see if we can add the RealizingElement, but only if list is in sync with port lists
if (realizingElementList.Count() == relatingPortList.Count())
ifcRelConnectsPorts.RealizingElement = GetElement(realizingElementList[i]);
//create the Relationship object
if (relatedElement != null)
Model.Instances.New<IfcRelConnectsPortToElement>(rcpe =>
{
rcpe.RelatingPort = ifcPortRelated;
rcpe.RelatedElement = relatedElement;
}
);
if (relatingElement != null)
Model.Instances.New<IfcRelConnectsPortToElement>(rcpe =>
{
rcpe.RelatingPort = ifcPortRelating;
rcpe.RelatedElement = relatingElement;
}
);
}
}
}
}
private bool Door(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcDoor ifcDoor = ifcElement as IfcDoor;
if (ifcDoor != null)
{
var ifcDoorStyle = ifcDoor.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcDoorStyle>(); //Excel cell ref A543
//Excel A480 to A507 id full range of the IfcDoorStyleOperationEnum/IfcDoorStyleConstructionEnum which are properties of IfcDoorStyle, so if we have ifcDoorStyle.Any() then we have covered this requirement
if (ifcDoorStyle.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
}
return _mergeDefault;
}
private bool FlowFitting(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcFlowFitting ifcFlowFitting = ifcElement as IfcFlowFitting;
if (ifcFlowFitting != null)
{
//IfcInterceptor/IfcInterceptorType is Ifc 2x4, not supported at this time.A859
var ifcJunctionBoxType = ifcFlowFitting.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcJunctionBoxType>(); //Excel cell ref A864
//Excel A851 to A863 id full range of the IfcJunctionBoxType which is a property of IfcJunctionBoxType.
//ifcJunctionBoxTypeEnum for Ifc2x3 does not hold "POWER" or "DATA", but lets assume that if we have the type we have the merge requirement
if (ifcJunctionBoxType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
return _mergeDefault;
}
private bool TransportElement(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcTransportElement ifcTransportElement = ifcElement as IfcTransportElement;
if (ifcTransportElement != null)
{
var ifcTransportElementType = ifcTransportElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcTransportElementType>(); //Excel cell ref A1280
//Excel A716 to A722 id full range of the IfcTransportElementEnum which is a property of IfcTransportElement, so if we have ifcTransportElement.Any() then we have covered this requirement
if (ifcTransportElementType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
return _mergeDefault;
}
