public void Output(string path)
{
average = (int)Math.Ceiling(layerPowderAmounts.Average(a => a));
sum = layerPowderAmounts.Sum(b => b);
FileStream fs = File.Open(path, FileMode.Create);
using (EnglishStreamWriter2 writer = new EnglishStreamWriter2(fs))
{
writer.WriteLine(String.Format("Sum-{0}", sum));
for (int i = 0; i < layerPowderAmounts.Count; i++)
{
writer.WriteLine(String.Format("Layer{0}-{1}", i, layerPowderAmounts[i]));
}
writer.Flush();
}
}
public bool GenerateDefineFile()
{
//string headerFile = Application.CommonAppDataPath + "\\composition\\Header.txt";
string headerFile = MainParameter.AppdataPath + MainParameter.AssemblyFileVersion + "\\composition\\Autodesk.txt";
MainParameter.DefineFile = headerFile;
FileStream fs = File.Open(headerFile, FileMode.Create);
EnglishStreamWriter2 writer = new EnglishStreamWriter2(fs);
try
{
writer.WriteLine("This file generate by XYZSDK for Autodesk.");
writer.Flush();
writer.Close();
return(true);
}
catch (Exception ex)
{
SVGTo3WL.logFile.writer.WriteLine("3WL Data, Error encountered: GenerateDefineFile.");
SVGTo3WL.logFile.writer.WriteLine("3WL Data exception: {0}", ex.ToString());
SVGTo3WL.logFile.writer.Flush();
Console.WriteLine("3WL Data, Error encountered: GenerateDefineFile");
Console.WriteLine("3WL Data exception: {0}", ex.ToString());
gCode.Release();
return(false);
}
}
public bool GenerateHeaderFile()
{
//string headerFile = Application.CommonAppDataPath + "\\composition\\Header.txt";
string headerFile = MainParameter.AppdataPath + MainParameter.AssemblyFileVersion + "\\composition\\Header.txt";
FileStream fs = File.Open(headerFile, FileMode.Create);
EnglishStreamWriter2 writer = new EnglishStreamWriter2(fs);
try
{
writer.WriteLine("; total dxf file size (kb): " + Math.Round(MainParameter.TotalDXFFileSize, 2));
writer.Write("; total Estimated Marking time (secs): " + Math.Round(MainParameter.totalEstimatedTime, 4));
writer.Flush();
writer.Close();
return(true);
}
catch (Exception ex)
{
SVGTo3WL.logFile.writer.WriteLine("3WL Data, Error encountered: GenerateHeaderFile.");
SVGTo3WL.logFile.writer.WriteLine("3WL Data exception: {0}", ex.ToString());
SVGTo3WL.logFile.writer.Flush();
Console.WriteLine("3WL Data, Error encountered: GenerateHeaderFile");
Console.WriteLine("3WL Data exception: {0}", ex.ToString());
gCode.Release();
return(false);
}
}
public void CreateNew(int index)
{
dxfFilePath = dxfPath + string.Format("\\layer{0}.dxf", index);
FileStream fs = File.Open(dxfFilePath, FileMode.Create);
writer = new EnglishStreamWriter2(fs);
writer.WriteLine(" 0\nSECTION\n 2\nENTITIES");
}
public void AddPolygon(float[] points)
{
writer.WriteLine(" 0\nLINE\n8\nL1");
writer.WriteLine(" 10");
writer.WriteLine((points[0] - widthOffset).ToString("0.0000"));
writer.WriteLine(" 20");
writer.WriteLine(points[1] - depthOffset);
writer.WriteLine(" 30");
writer.WriteLine("0.0000");
for (int i = 2; i < points.Length - 1; i += 2)
{
float X = points[i] - widthOffset;
float Y = points[i + 1] - depthOffset;
writer.WriteLine(" 11");
writer.WriteLine(X.ToString());
writer.WriteLine(" 21");
writer.WriteLine(Y.ToString());
writer.WriteLine(" 31");
writer.WriteLine("0.0000");
writer.WriteLine(" 0\nLINE\n8\nL1");
writer.WriteLine(" 10");
writer.WriteLine(X.ToString());
writer.WriteLine(" 20");
writer.WriteLine(Y.ToString());
writer.WriteLine(" 30");
writer.WriteLine("0.0000");
}
writer.WriteLine(" 11");
writer.WriteLine(points[0] - widthOffset);
writer.WriteLine(" 21");
writer.WriteLine(points[1] - depthOffset);
writer.WriteLine(" 31");
writer.WriteLine("0.0000");
}
public void Header(float layerHeight, int layerAmount)
{
float printDensity = (float)PrinterSetting.PrintAreaWidth * (float)PrinterSetting.PrintAreaDepth * layerAmount * layerHeight;
//float packingDensity = ((float)MainParameter.gCodeVolume / printDensity) * 100f;
float packingDensity = (float)MainParameter.PackingDensity;
//List<model.PrintModel> models = Main.main.objectPlacement.models;
writer.WriteLine("3DPSNKG13WTW0000");
writer.WriteLine("; machine: SLS 1.0");
writer.WriteLine("; ----------Summary Details---------- ");
writer.WriteLine("; layer height: " + layerHeight.ToString());
writer.WriteLine("; filled: no");
writer.WriteLine("; volume: " + MainParameter.gCodeVolume.ToString("#,0.0000"));
writer.WriteLine("; model width: 1");
writer.WriteLine("; model length: 1");
writer.WriteLine("; model height: {0}", MainParameter.selLayerHeight * MainParameter.layercount);
writer.WriteLine("; layer count: " + layerAmount.ToString());
writer.WriteLine("; parts count: " + MainParameter.ModelCount.ToString());
writer.WriteLine("; packing density %: " + packingDensity.ToString("0.00"));
writer.WriteLine("; non-sintered powder: " + (printDensity - MainParameter.gCodeVolume).ToString("0.00") + "\n\n");
//if (MainParameter.ModelCount > 1)
//{
// writer.WriteLine("; ----------Parts Details---------- ");
// for (int i = 0; i < models.Count; i++)
// {
// model.PrintModel mod = models[i];
// //<Carson(Taipei)><07-02-2019><Modified - Fixed non-ascii encryption error>
// //writer.WriteLine("; part" + "[" + (i + 1) + "]" + ": " + mod);
// writer.WriteLine("; part" + "[" + (i + 1) + "]" + ": ");
// //<><><>
// writer.WriteLine("; volume: " + mod.ActiveModel.Volume().ToString("0.00"));
// writer.WriteLine("; part width: " + (mod.xMax - mod.xMin).ToString("0.00"));
// writer.WriteLine("; part length: " + (mod.yMax - mod.yMin).ToString("0.00"));
// writer.WriteLine("; part height: " + (mod.zMax - mod.zMin).ToString("0.00"));
// writer.WriteLine("; layer count: " + Math.Floor((mod.zMax - mod.zMin) / layerHeight).ToString("0") + "\n");
// }
// writer.WriteLine();
//}
writer.WriteLine("M601 ; Laser Off");;
}
public bool GenerateRecordFile()
{
try
{
//Main.main.LogMessage("Main", "Generating Record file ....." , "");
//string recordFilePath = Application.CommonAppDataPath + "\\composition\\RecordFile.txt";
string recordFilePath = MainParameter.AppdataPath + MainParameter.AssemblyFileVersion + "\\composition\\RecordFile.txt";
//StringBuilder shortPath = new StringBuilder(255);
//Main.GetShortPathName(recordFilePath, shortPath, shortPath.Capacity);
//recordFilePath = shortPath.ToString();
FileStream fs = File.Open(recordFilePath, FileMode.Create);
EnglishStreamWriter2 writer = new EnglishStreamWriter2(fs);
//Main.main.threedview.ui.ProfileSettings_UI.Dispatcher.Invoke(new Action(() =>{
//writer.WriteLine("Infill Scan Speed: "+Main.main.threedview.ui.ProfileSettings_UI.txt_InfillScanningSpeed.Text);
//writer.WriteLine("Contour Scan Speed: " + Main.main.threedview.ui.ProfileSettings_UI.txt_ContourScanningSpeed.Text);
//writer.WriteLine("Beam Offset: " + Main.main.threedview.ui.ProfileSettings_UI.txt_InfillContourOffset.Text);
//writer.WriteLine("Fill Round Pitch: " + Main.main.threedview.ui.ProfileSettings_UI.txt_InfillBorderOffset.Text);
//writer.WriteLine("Border: 0.12");
//writer.WriteLine("Step Angle: 90");
//writer.WriteLine("Offset Angle: 180");
//writer.WriteLine("Infill Pitch: " + Main.main.threedview.ui.ProfileSettings_UI.txt_InfillSinterPitch.Text);
//writer.WriteLine("Start Angle: " + Main.main.threedview.ui.ProfileSettings_UI.txt_StartAngle.Text);
//writer.WriteLine("Powder Density:" + Main.main.threedview.ui.ProfileSettings_UI.Powder_Density.Text);
//writer.WriteLine("Sintered Density:" + Main.main.threedview.ui.ProfileSettings_UI.Sintered_Density.Text);
//writer.WriteLine("Laser Sintering Twice: " + Main.main.threedview.ui.ProfileSettings_UI.SelectedProfileSettings.SinteringTwice.ToString());
////<timmy><9-15-2020><add base/cover in RecordFile.txt>
//writer.WriteLine("Base Layers: " + Main.main.threedview.ui.ProfileSettings_UI.SelectedProfileSettings.baselayercyclecount.ToString());
//writer.WriteLine("Cover Layers: " + Main.main.threedview.ui.ProfileSettings_UI.SelectedProfileSettings.coverlayer.ToString());
////<><><>
//}));
writer.WriteLine("Infill Scan Speed: 0");
writer.WriteLine("Contour Scan Speed: 0");
writer.WriteLine("Beam Offset: 0");
writer.WriteLine("Fill Round Pitch: 0");
writer.WriteLine("Border: 0");
writer.WriteLine("Step Angle: 0");
writer.WriteLine("Offset Angle: 0");
writer.WriteLine("Infill Pitch: 0");
writer.WriteLine("Start Angle: 0");
writer.WriteLine("Powder Density:0");
writer.WriteLine("Sintered Density:0");
writer.WriteLine("Laser Sintering Twice: 0");
//<timmy><9-15-2020><add base/cover in RecordFile.txt>
writer.WriteLine("Base Layers: 0");
writer.WriteLine("Cover Layers: 0");
//<><><>
writer.Flush();
writer.Dispose();
//Main.main.LogMessage("Main", "Success: Record File was Generated.", "");
return(true);
}
catch (Exception ex)
{
//Main.main.LogMessage("Main", "Failed: Generating record file.", "");
SVGTo3WL.logFile.writer.WriteLine("3WL Data, Error encountered: GenerateRecordFile.");
SVGTo3WL.logFile.writer.WriteLine("3WL Data exception: {0}", ex.ToString());
SVGTo3WL.logFile.writer.Flush();
Console.WriteLine("3WL Data, Error encountered: GenerateRecordFile");
Console.WriteLine("3WL Data exception: {0}", ex.ToString());
gCode.Release();
return(false);
}
}