private Path getPiece()
{
if ((piece == cross))
{
Path lines = new Path();
LineGeometry line1 = new LineGeometry();
LineGeometry line2 = new LineGeometry();
GeometryGroup linegroup = new GeometryGroup();
line1.StartPoint = new Point(0, 0);
line1.EndPoint = new Point(60, 60);
line2.StartPoint = new Point(60, 0);
line2.EndPoint = new Point(0, 60);
linegroup.Children.Add(line1);
linegroup.Children.Add(line2);
lines.Data = linegroup;
lines.Stroke = new SolidColorBrush(Colors.Red);
lines.StrokeThickness = 5;
lines.Margin = new Thickness(10);
return lines;
}
else
{
EllipseGeometry ellipse = new EllipseGeometry();
Path circle = new Path();
ellipse.Center = new Point(30, 30);
ellipse.RadiusX = 30;
ellipse.RadiusY = 30;
circle.Data = ellipse;
circle.Stroke = new SolidColorBrush(Colors.Blue);
circle.StrokeThickness = 5;
circle.Margin = new Thickness(10);
return circle;
}
}
public static void AddLineGeometry(
this D2D.GeometrySink sink, Jupiter.Media.LineGeometry lineGeometry)
{
sink.BeginFigure(
lineGeometry.StartPoint.ToSharpDX(),
D2D.FigureBegin.Hollow);
sink.AddLine(
lineGeometry.EndPoint.ToSharpDX());
sink.EndFigure(D2D.FigureEnd.Open);
}
public TileUC()
{
this.InitializeComponent();
brush = new SolidColorBrush(Colors.Green);
var c = 32;
for (int i = 0; i < c; i++) {
var f = Dim / c;
var p = f * i;
{
var geo = new LineGeometry() { StartPoint = new Point(0, p), EndPoint = new Point(Dim - p, Dim) };
var item = new Path();
item.Data = geo;
item.Stroke = brush;
item.StrokeThickness = .5;
item.StrokeEndLineCap = PenLineCap.Square;
this.Content.Children.Add(item);
}
if (i == 0) continue;
{
var geo = new LineGeometry() { StartPoint = new Point(p, 0), EndPoint = new Point(Dim, Dim - p) };
var item = new Path();
item.Data = geo;
item.Stroke = brush;
item.StrokeThickness = .5;
item.StrokeEndLineCap = PenLineCap.Square;
this.Content.Children.Add(item);
}
}
}
public static WMedia.Geometry ToWindows(this Geometry geometry)
{
WMedia.Geometry wGeometry = null;
if (geometry is LineGeometry)
{
LineGeometry lineGeometry = geometry as LineGeometry;
wGeometry = new WMedia.LineGeometry
{
StartPoint = lineGeometry.StartPoint.ToWindows(),
EndPoint = lineGeometry.EndPoint.ToWindows()
};
}
else if (geometry is RectangleGeometry)
{
var rect = (geometry as RectangleGeometry).Rect;
wGeometry = new WMedia.RectangleGeometry
{
Rect = new WFoundation.Rect(rect.X, rect.Y, rect.Width, rect.Height)
};
}
else if (geometry is EllipseGeometry)
{
EllipseGeometry ellipseGeometry = geometry as EllipseGeometry;
wGeometry = new WMedia.EllipseGeometry
{
Center = ellipseGeometry.Center.ToWindows(),
RadiusX = ellipseGeometry.RadiusX,
RadiusY = ellipseGeometry.RadiusY
};
}
else if (geometry is GeometryGroup)
{
GeometryGroup geometryGroup = geometry as GeometryGroup;
wGeometry = new WMedia.GeometryGroup
{
FillRule = ConvertFillRule(geometryGroup.FillRule)
};
foreach (Geometry children in geometryGroup.Children)
{
WMedia.Geometry winChild = children.ToWindows();
(wGeometry as WMedia.GeometryGroup).Children.Add(winChild);
}
}
else if (geometry is PathGeometry)
{
PathGeometry pathGeometry = geometry as PathGeometry;
WMedia.PathGeometry wPathGeometry = new WMedia.PathGeometry
{
FillRule = ConvertFillRule(pathGeometry.FillRule)
};
foreach (PathFigure xamPathFigure in pathGeometry.Figures)
{
WMedia.PathFigure wPathFigure = new WMedia.PathFigure
{
StartPoint = xamPathFigure.StartPoint.ToWindows(),
IsFilled = xamPathFigure.IsFilled,
IsClosed = xamPathFigure.IsClosed
};
wPathGeometry.Figures.Add(wPathFigure);
foreach (PathSegment pathSegment in xamPathFigure.Segments)
{
// LineSegment
if (pathSegment is LineSegment)
{
LineSegment lineSegment = pathSegment as LineSegment;
WMedia.LineSegment winSegment = new WMedia.LineSegment
{
Point = lineSegment.Point.ToWindows()
};
wPathFigure.Segments.Add(winSegment);
}
// PolylineSegment
if (pathSegment is PolyLineSegment)
{
PolyLineSegment polyLineSegment = pathSegment as PolyLineSegment;
WMedia.PolyLineSegment wSegment = new WMedia.PolyLineSegment();
foreach (var point in polyLineSegment.Points)
{
wSegment.Points.Add(point.ToWindows());
}
wPathFigure.Segments.Add(wSegment);
}
// BezierSegment
if (pathSegment is BezierSegment)
{
BezierSegment bezierSegment = pathSegment as BezierSegment;
WMedia.BezierSegment wSegment = new WMedia.BezierSegment
{
Point1 = bezierSegment.Point1.ToWindows(),
Point2 = bezierSegment.Point2.ToWindows(),
Point3 = bezierSegment.Point3.ToWindows()
};
wPathFigure.Segments.Add(wSegment);
}
// PolyBezierSegment
else if (pathSegment is PolyBezierSegment)
{
PolyBezierSegment polyBezierSegment = pathSegment as PolyBezierSegment;
WMedia.PolyBezierSegment wSegment = new WMedia.PolyBezierSegment();
foreach (var point in polyBezierSegment.Points)
{
wSegment.Points.Add(point.ToWindows());
}
wPathFigure.Segments.Add(wSegment);
}
// QuadraticBezierSegment
if (pathSegment is QuadraticBezierSegment)
{
QuadraticBezierSegment quadraticBezierSegment = pathSegment as QuadraticBezierSegment;
WMedia.QuadraticBezierSegment wSegment = new WMedia.QuadraticBezierSegment
{
Point1 = quadraticBezierSegment.Point1.ToWindows(),
Point2 = quadraticBezierSegment.Point2.ToWindows()
};
wPathFigure.Segments.Add(wSegment);
}
// PolyQuadraticBezierSegment
else if (pathSegment is PolyQuadraticBezierSegment)
{
PolyQuadraticBezierSegment polyQuadraticBezierSegment = pathSegment as PolyQuadraticBezierSegment;
WMedia.PolyQuadraticBezierSegment wSegment = new WMedia.PolyQuadraticBezierSegment();
foreach (var point in polyQuadraticBezierSegment.Points)
{
wSegment.Points.Add(point.ToWindows());
}
wPathFigure.Segments.Add(wSegment);
}
// ArcSegment
else if (pathSegment is ArcSegment)
{
ArcSegment arcSegment = pathSegment as ArcSegment;
WMedia.ArcSegment wSegment = new WMedia.ArcSegment
{
Size = new WFoundation.Size(arcSegment.Size.Width, arcSegment.Size.Height),
RotationAngle = arcSegment.RotationAngle,
IsLargeArc = arcSegment.IsLargeArc,
SweepDirection = arcSegment.SweepDirection == SweepDirection.Clockwise ? WMedia.SweepDirection.Clockwise : WMedia.SweepDirection.Counterclockwise,
Point = arcSegment.Point.ToWindows()
};
wPathFigure.Segments.Add(wSegment);
}
}
}
wGeometry = wPathGeometry;
}
return(wGeometry);
}
public object ConvertToNative(Geometry geometry)
{
winMedia.Geometry winGeometry = null;
// Determine what type of geometry we're dealing with.
if (geometry is LineGeometry)
{
LineGeometry xamGeometry = geometry as LineGeometry;
winGeometry = new winMedia.LineGeometry
{
StartPoint = ConvertPoint(xamGeometry.StartPoint),
EndPoint = ConvertPoint(xamGeometry.EndPoint)
};
}
else if (geometry is RectangleGeometry)
{
Rect rect = (geometry as RectangleGeometry).Rect;
winGeometry = new winMedia.RectangleGeometry
{
Rect = new winFound.Rect(rect.X, rect.Y, rect.Width, rect.Height)
};
}
else if (geometry is EllipseGeometry)
{
EllipseGeometry xamGeometry = geometry as EllipseGeometry;
winGeometry = new winMedia.EllipseGeometry
{
Center = ConvertPoint(xamGeometry.Center),
RadiusX = xamGeometry.RadiusX,
RadiusY = xamGeometry.RadiusY
};
}
else if (geometry is GeometryGroup)
{
GeometryGroup xamGeometry = geometry as GeometryGroup;
winGeometry = new winMedia.GeometryGroup
{
FillRule = ConvertFillRule(xamGeometry.FillRule)
};
foreach (Geometry xamChild in xamGeometry.Children)
{
winMedia.Geometry winChild = ConvertToNative(xamChild) as winMedia.Geometry;
(winGeometry as winMedia.GeometryGroup).Children.Add(winChild);
}
}
else if (geometry is PathGeometry)
{
PathGeometry xamPathGeometry = geometry as PathGeometry;
winMedia.PathGeometry winPathGeometry = new winMedia.PathGeometry
{
FillRule = ConvertFillRule(xamPathGeometry.FillRule)
};
foreach (PathFigure xamPathFigure in xamPathGeometry.Figures)
{
winMedia.PathFigure winPathFigure = new winMedia.PathFigure
{
StartPoint = ConvertPoint(xamPathFigure.StartPoint),
IsFilled = xamPathFigure.IsFilled,
IsClosed = xamPathFigure.IsClosed
};
winPathGeometry.Figures.Add(winPathFigure);
foreach (PathSegment xamPathSegment in xamPathFigure.Segments)
{
// LineSegment
if (xamPathSegment is LineSegment)
{
LineSegment xamSegment = xamPathSegment as LineSegment;
winMedia.LineSegment winSegment = new winMedia.LineSegment
{
Point = ConvertPoint(xamSegment.Point)
};
winPathFigure.Segments.Add(winSegment);
}
// PolylineSegment
if (xamPathSegment is PolyLineSegment)
{
PolyLineSegment xamSegment = xamPathSegment as PolyLineSegment;
winMedia.PolyLineSegment winSegment = new winMedia.PolyLineSegment();
foreach (Point point in xamSegment.Points)
{
winSegment.Points.Add(ConvertPoint(point));
}
winPathFigure.Segments.Add(winSegment);
}
// BezierSegment
if (xamPathSegment is BezierSegment)
{
BezierSegment xamSegment = xamPathSegment as BezierSegment;
winMedia.BezierSegment winSegment = new winMedia.BezierSegment
{
Point1 = ConvertPoint(xamSegment.Point1),
Point2 = ConvertPoint(xamSegment.Point2),
Point3 = ConvertPoint(xamSegment.Point3)
};
winPathFigure.Segments.Add(winSegment);
}
// PolyBezierSegment
else if (xamPathSegment is PolyBezierSegment)
{
PolyBezierSegment xamSegment = xamPathSegment as PolyBezierSegment;
winMedia.PolyBezierSegment winSegment = new winMedia.PolyBezierSegment();
foreach (Point point in xamSegment.Points)
{
winSegment.Points.Add(ConvertPoint(point));
}
winPathFigure.Segments.Add(winSegment);
}
// QuadraticBezierSegment
if (xamPathSegment is QuadraticBezierSegment)
{
QuadraticBezierSegment xamSegment = xamPathSegment as QuadraticBezierSegment;
winMedia.QuadraticBezierSegment winSegment = new winMedia.QuadraticBezierSegment
{
Point1 = ConvertPoint(xamSegment.Point1),
Point2 = ConvertPoint(xamSegment.Point2),
};
winPathFigure.Segments.Add(winSegment);
}
// PolyQuadraticBezierSegment
else if (xamPathSegment is PolyQuadraticBezierSegment)
{
PolyQuadraticBezierSegment xamSegment = xamPathSegment as PolyQuadraticBezierSegment;
winMedia.PolyQuadraticBezierSegment winSegment = new winMedia.PolyQuadraticBezierSegment();
foreach (Point point in xamSegment.Points)
{
winSegment.Points.Add(ConvertPoint(point));
}
winPathFigure.Segments.Add(winSegment);
}
// ArcSegment
else if (xamPathSegment is ArcSegment)
{
ArcSegment xamSegment = xamPathSegment as ArcSegment;
winMedia.ArcSegment winSegment = new winMedia.ArcSegment();
winSegment.Size = new winFound.Size(xamSegment.Size.Width, xamSegment.Size.Height);
winSegment.RotationAngle = xamSegment.RotationAngle;
winSegment.IsLargeArc = xamSegment.IsLargeArc;
winSegment.SweepDirection = xamSegment.SweepDirection == SweepDirection.Clockwise ? winMedia.SweepDirection.Clockwise : winMedia.SweepDirection.Counterclockwise;
winSegment.Point = ConvertPoint(xamSegment.Point);
winPathFigure.Segments.Add(winSegment);
}
}
}
winGeometry = winPathGeometry;
}
// Set transform.
if (geometry.Transform != null)
{
winGeometry.Transform = (winMedia.Transform)geometry.Transform.GetNativeObject();
}
return(winGeometry);
}
public Crossline(Color color, PointerPoint point)
{
this.horizontalPath = new Path();
this.verticalPath = new Path();
this.point = point;
horizontalPath.Stroke = new SolidColorBrush(color);
verticalPath.Stroke = new SolidColorBrush(color);
LineGeometry horizontalLg = new LineGeometry();
horizontalLg.StartPoint = new Point(0, 0);
horizontalLg.EndPoint = new Point(Window.Current.Bounds.Width, 0);
TranslateTransform horizontalLineTrans = new TranslateTransform();
horizontalLineTrans.Y = point.Position.Y;
horizontalLineTrans.X = 0;
horizontalLg.Transform = horizontalLineTrans;
horizontalPath.Data = horizontalLg;
horizontalPath.StrokeThickness = strokeThickness;
LineGeometry verticalLg = new LineGeometry();
verticalLg.StartPoint = new Point(0, 0);
verticalLg.EndPoint = new Point(0, Window.Current.Bounds.Height);
TranslateTransform verticalLineTrans = new TranslateTransform();
verticalLineTrans.X = point.Position.X;
verticalLineTrans.Y = 0;
verticalLg.Transform = verticalLineTrans;
verticalPath.Data = verticalLg;
verticalPath.StrokeThickness = strokeThickness;
}
public void DisplayTime()
{
//txtTo.Text = DateTime.Now.ToString("mm/dd/yyyy HH:mm:ss");
string HH_str = DateTime.Now.ToString("HH");
int hour = Convert.ToInt32(HH_str); ;
shadow1.Stroke = new SolidColorBrush(Colors.Black);
shadow2.Stroke = new SolidColorBrush(Colors.Black);
shadow1.StrokeThickness = 3;
shadow2.StrokeThickness = 3;
LineGeometry s1Geometry = new LineGeometry();
LineGeometry s2Geometry = new LineGeometry();
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(231, 300);
shadow1.Data = s1Geometry;
shadow1.HorizontalAlignment = HorizontalAlignment.Left;
shadow1.VerticalAlignment = VerticalAlignment.Center;
if (hour > 3 && hour < 21)
{
shadow1.Visibility = Visibility.Visible;
shadow2.Visibility = Visibility.Visible;
}
switch (hour)
{
case 4:
//shadow 1
shadow1.Margin = new Thickness { Left = 228.655, Top = 220, Right = 193.5, Bottom = 336 };
//shadow 2
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(235, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 92.5;
shadow2.Width = 45.345;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 193.5, Bottom = 311.5 };
break;
case 5:
//shadow 1
shadow1.Margin = new Thickness { Left = 228.655, Top = 238.25, Right = 162, Bottom = 336 };
//shadow 2
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(235, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 82.25;
shadow2.Width = 80.832;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 162, Bottom = 303.5 };
break;
case 6:
//shadow 1
shadow1.Margin = new Thickness { Left = 228.655, Top = 260, Right = 143, Bottom = 336 };
//shadow 2
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(235, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 60.5;
shadow2.Width = 99.082;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 143.75, Bottom = 303.5 };
break;
case 7:
//shadow 1
shadow1.Margin = new Thickness { Left = 228.655, Top = 286.5, Right = 138, Bottom = 336 };
//shadow 2
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(235, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 34;
shadow2.Width = 104.832;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 138, Bottom = 303.5 };
break;
case 8:
//shadow 1
shadow1.Margin = new Thickness { Left = 228.655, Top = 286.5, Right = 145.25, Bottom = 311.5 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(261, 300);
shadow1.Data = s1Geometry;
//shadow 2
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(235, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 7.4;
shadow2.Width = 97.932;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 146.4, Bottom = 305 };
break;
case 9:
//shadow 1
shadow1.Margin = new Thickness { Left = 228.655, Top = 286.5, Right = 161, Bottom = 297 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(261, 300);
shadow1.Data = s1Geometry;
//228.655,286.5,161,297"
//shadow 2
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(240, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 16.65;
shadow2.Width = 83.332;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 161, Bottom = 293.75 };
break;
case 10:
//shadow 1
shadow1.Margin = new Thickness { Left = 228.655, Top = 286.5, Right = 179, Bottom = 280 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(261, 300);
shadow1.Data = s1Geometry;
//shadow 2 shadow2" Data="M238,324.00107 L240,387.00137" Margin="0,0,179,280" Width="65.332" Height="30.4" >10
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(240, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 30.4;
shadow2.Width = 65.332;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 179, Bottom = 280 };
break;
case 11:
//shadow 1 shadow1" Data="M235,208 L251,300" Margin="228.655,286.5,203.333,268.999" />11
shadow1.Margin = new Thickness { Left = 228.655, Top = 286.5, Right = 203.333, Bottom = 268.999 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(261, 300);
shadow1.Data = s1Geometry;
//shadow 2 shadow2" Data="M238,324.00107 L240,387.00137" Margin="0,0,203.333,268.999" Width="40.999" Height="41.401" /> 11
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(240, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 41.401;
shadow2.Width = 40.999;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 203.333, Bottom = 268.999 };
break;
case 12:
//shadow 1 shadow1" Data="M235,208 L251,300" Margin="228.655,286.5,226.833,264" /> 12
shadow1.Margin = new Thickness { Left = 228.655, Top = 286.5, Right = 226.833, Bottom = 264 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(261, 300);
shadow1.Data = s1Geometry;
//shadow 2 shadow2" Data="M238,324.00107 L240,387.00137" Margin="0,0,226.833,264" Width="17.499" Height="46.4" /> 12
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(240, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 46.4;
shadow2.Width = 17.499;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 226.833, Bottom = 264 };
break;
case 13:
//shadow 1 M235,208 L261,300" Data="M235,208 L251,300" Margin="228.655,286.5,250.345,264" />1
shadow1.Margin = new Thickness { Left = 228.655, Top = 286.5, Right = 250.345, Bottom = 260 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(251, 300);
shadow1.HorizontalAlignment = HorizontalAlignment.Right;
shadow1.VerticalAlignment = VerticalAlignment.Bottom;
shadow1.Data = s1Geometry;
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(230, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 49.6;
shadow2.Width = 9.2;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 241, Bottom = 260 };
break;
case 14:
//shadow 1shadow1" Data="M235,208 L231,300" Margin="207.667,284.25,253.333,260"
shadow1.Margin = new Thickness { Left = 207.667, Top = 284.25, Right = 253.333, Bottom = 260 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(231, 300);
shadow1.HorizontalAlignment = HorizontalAlignment.Right;
shadow1.VerticalAlignment = VerticalAlignment.Bottom;
shadow1.Data = s1Geometry;
// shadow2" Data="M238,324.00107 L230,387.00137" Margin="0,0,241.333,260" Width="31" Height="47.333" /> 2
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(230, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 47.333;
shadow2.Width = 31;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 241.333, Bottom = 260 };
break;
case 15:
//shadow1" Data="M235,208 L231,300" Margin="180,284.25,253.333,264" /> 3
shadow1.Margin = new Thickness { Left = 180, Top = 284.25, Right = 253.333, Bottom = 264 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(231, 300);
shadow1.HorizontalAlignment = HorizontalAlignment.Right;
shadow1.VerticalAlignment = VerticalAlignment.Bottom;
shadow1.Data = s1Geometry;
// shadow2" Data="M238,324.00107 L230,387.00137" Margin="0,0,241.333,264" Width="58.667" Height="43.333" /> 3
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(230, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 47.333;
shadow2.Width = 58.667;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 241.333, Bottom = 264 };
break;
case 16:
//shadow1" Data="M235,208 L231,300" Margin="154.333,284.25,253.333,275" />4
shadow1.Margin = new Thickness { Left = 154.333, Top = 284.25, Right = 253.333, Bottom = 275 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(231, 300);
shadow1.HorizontalAlignment = HorizontalAlignment.Right;
shadow1.VerticalAlignment = VerticalAlignment.Bottom;
shadow1.Data = s1Geometry;
// shadow2" Data="M238,324.00107 L230,387.00137" Margin="0,0,241.333,275" Width="84.334" Height="32.333" />
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(230, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 32.333;
shadow2.Width = 84.334;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 241.333, Bottom = 275 };
break;
case 17:
//shadow1" Data="M235,208 L231,300" Margin="129,284.25,253.333,293.75" />5
shadow1.Margin = new Thickness { Left = 129, Top = 284.25, Right = 253.333, Bottom = 293.75 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(231, 300);
shadow1.HorizontalAlignment = HorizontalAlignment.Right;
shadow1.VerticalAlignment = VerticalAlignment.Bottom;
shadow1.Data = s1Geometry;
// shadow2" Data="M238,324.00107 L230,387.00137" Margin="0,0,241.333,293.75" Width="109.667" Height="13.583" />5
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(230, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 13.583;
shadow2.Width = 109.667;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 241.333, Bottom = 293.75 };
break;
case 18:
//shadow1" Data="M235,208 L231,300" Margin="107,284.25,253.333,321" /> 6
shadow1.Margin = new Thickness { Left = 107, Top = 284.25, Right = 253.333, Bottom = 321 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(231, 300);
shadow1.HorizontalAlignment = HorizontalAlignment.Right;
shadow1.VerticalAlignment = VerticalAlignment.Bottom;
shadow1.Data = s1Geometry;
// shadow2" Data="M238,324.00107 L260,387.00137" Margin="0,0,241.333,305.333" Width="131.667" Height="16" />6
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(260, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 16;
shadow2.Width = 131.667;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 241.333, Bottom = 305.333 };
break;
case 19:
//shadow1" Data="M235,208 L261,300" Margin="107,271.667,253.333,338.333" /> 7
shadow1.Margin = new Thickness { Left = 107, Top = 271.667, Right = 253.333, Bottom = 338.333 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(261, 300);
shadow1.HorizontalAlignment = HorizontalAlignment.Right;
shadow1.VerticalAlignment = VerticalAlignment.Bottom;
shadow1.Data = s1Geometry;
// Data="M238,324.00107 L260,387.00137" Margin="0,0,241.333,305.333" Width="131.667" Height="47" /> 7
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(260, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 47;
shadow2.Width = 131.667;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 241.333, Bottom = 305.333 };
break;
case 20:
//s shadow1" Data="M235,208 L261,300" Margin="121.667,244.333,253.333,338.333" /> 8
shadow1.Margin = new Thickness { Left = 121.667, Top = 244, Right = 253.333, Bottom = 338.333 };
s1Geometry.StartPoint = new Point(235, 208);
s1Geometry.EndPoint = new Point(261, 300);
shadow1.HorizontalAlignment = HorizontalAlignment.Right;
shadow1.VerticalAlignment = VerticalAlignment.Bottom;
shadow1.Data = s1Geometry;
// w2" Data="M238,324.00107 L260,387.00137" Margin="0,0,241.333,305.333" Width="116.667" Height="74" /> 8
s2Geometry.StartPoint = new Point(238, 324.00107);
s2Geometry.EndPoint = new Point(260, 387.00137);
shadow2.Data = s2Geometry;
shadow2.HorizontalAlignment = HorizontalAlignment.Right;
shadow2.VerticalAlignment = VerticalAlignment.Bottom;
shadow2.Height = 74;
shadow2.Width = 116.667;
shadow2.Margin = new Thickness { Left = 0, Top = 0, Right = 241.333, Bottom = 305.333 };
break;
}
}
public override Path CreateGrid()
{
Path _outline = base.CreateGrid();
_outline.Name = "RADIAL_GRID";
if (Dim1 == null || Dim2 == null) return _outline;
GeometryGroup gg = new GeometryGroup();
Point origin = new Point(0, 0);
double inc = (_dim1.Inc <= 0) ? 5 : _dim1.Inc;
for (double r = _dim1.Start; r <= _dim1.End; r += inc)
{
EllipseGeometry eg = new EllipseGeometry();
eg.Center = origin;
eg.RadiusX = eg.RadiusY = r;
gg.Children.Add(eg);
}
inc = (_dim2.Inc <= 0) ? 5 : _dim2.Inc;
for (double a = _dim2.Start; a <= _dim2.End; a += _dim2.Inc)
{
double aa = a * Math.PI / 180;
double xs = _dim1.Start * Math.Cos(aa);
double ys = _dim1.Start * Math.Sin(aa);
Point start = new Point(xs, ys);
double xe = _dim1.End * Math.Cos(aa);
double ye = _dim1.End * Math.Sin(aa);
Point end = new Point(xe, ye);
LineGeometry lg = new LineGeometry();
lg.StartPoint = start;
lg.EndPoint = end;
gg.Children.Add(lg);
}
_outline.Data = gg;
return _outline;
}
private Path getPiece(int player)
{
if ((player == 1)) // Draw X
{
Path lines = new Path();
LineGeometry line1 = new LineGeometry();
LineGeometry line2 = new LineGeometry();
GeometryGroup linegroup = new GeometryGroup();
line1.StartPoint = new Point(0, 0);
line1.EndPoint = new Point(30, 30);
line2.StartPoint = new Point(30, 0);
line2.EndPoint = new Point(0, 30);
linegroup.Children.Add(line1);
linegroup.Children.Add(line2);
lines.Data = linegroup;
lines.Stroke = new SolidColorBrush(Colors.Red);
lines.StrokeThickness = 2;
lines.Margin = new Thickness(4);
return lines;
}
else // Draw O
{
EllipseGeometry ellipse = new EllipseGeometry();
Path circle = new Path();
ellipse.Center = new Point(15, 15);
ellipse.RadiusX = 15;
ellipse.RadiusY = 15;
circle.Data = ellipse;
circle.Stroke = new SolidColorBrush(Colors.Blue);
circle.StrokeThickness = 2;
circle.Margin = new Thickness(4);
return circle;
}
}
public async Task<bool> DrawWaveform(Canvas canvas)
{
if (this.WaveFile == null)
{
this.WaveFile = await WaveFile.Create(AudioFile);
}
double W = canvas.ActualWidth;
double H = canvas.ActualHeight;
double y_c = H / 2.0;
canvas.Children.Clear();
double dseconds = (1.0 / 16000.0);
double dpixels = PixelsPerSecond * dseconds;
canvas.Width = this.WaveFile.SmoothedSamples.Count * dpixels;
Path path = new Path();
path.Stroke = new SolidColorBrush(Windows.UI.Colors.DeepSkyBlue);
path.StrokeThickness = 2.0;
GeometryGroup geomGroup = new GeometryGroup();
for (int i = 0; i < Samples.Count; ++i)
{
double f = Samples[i];
Point a = new Point((i * dpixels) + 0.5, y_c - f * y_c);
Point b = new Point((i * dpixels) + 0.5, y_c + f * y_c);
LineGeometry line = new LineGeometry();
line.StartPoint = a;
line.EndPoint = b;
geomGroup.Children.Add(line);
}
path.Data = geomGroup;
canvas.Children.Add(path);
return true;
}
private void DrawYLines()
{
RemoveGuidlines(GuideLines.Y);
var height = ActualHeight;
var loops = (int) height/YGuideLineResolution; // amount of Y info
for (var i = 1; i < loops; i++)
{
// text
var length = _seriesMaxY - _seriesMinY;
var interval = length/(loops - 1);
//
var tb = new TextBlock
{
Text = Math.Round(_seriesMinY + (i*interval), 1).ToString(),
Foreground = GuideTextColor,
FontSize = GuideTextSize,
Margin = new Thickness(5, _drawAreaBottom - (i*(ActualHeight/6)) - 5, 0, 0)
};
var p = new Path();
var geo = new LineGeometry
{
StartPoint = new Point(25, _drawAreaBottom - (i*(ActualHeight/6))),
EndPoint = new Point(ActualWidth - 25, _drawAreaBottom - (i*(ActualHeight/6)))
};
p.Stroke = GuideLineColor;
p.StrokeDashArray = new DoubleCollection {5, 20};
p.StrokeThickness = GuideLineThickness;
p.Data = geo;
if (ShowText)
_yDataMarkers.Add(tb);
_yGuideLines = p;
if (ShowText)
SetZIndex(tb, 15);
SetZIndex(p, 14);
if (ShowText)
Children.Add(tb);
Children.Add(p);
}
}
private void DrawXLines()
{
RemoveGuidlines(GuideLines.X);
var width = ActualWidth; // just in case it changes?
var height = ActualHeight;
var loops = (int) width/XGuideLineResolution; // amount of x info
/*
if ((width / this.data.Count) > this.xResolution) // if there are less data points than the resolution, show the absolute data points
{
loops = this.data.Count;
}
*/
for (var i = 1; i < loops; i++)
{
var x = width/(loops - 1)*i;
// text
var length = _seriesMaxX - _seriesMinX;
var interval = length/(loops - 1);
//
var tb = new TextBlock
{
Text = Math.Round(_seriesMinX + (i*interval), 1).ToString(),
Foreground = GuideTextColor,
FontSize = GuideTextSize
};
tb.Margin = new Thickness(x - (tb.Text.Length/2*6), height - 20, 0, 20);
var p = new Path();
var geo = new LineGeometry {StartPoint = new Point(x, 20), EndPoint = new Point(x, ActualHeight - 20)};
p.Stroke = GuideLineColor;
p.StrokeDashArray = new DoubleCollection {5, 20};
p.StrokeThickness = GuideLineThickness;
p.Data = geo;
if (ShowText)
_xDataMarkers.Add(tb);
_xGuideLines = p;
if (ShowText)
SetZIndex(tb, 15);
SetZIndex(p, 14);
if (ShowText)
Children.Add(tb);
Children.Add(p);
}
}
public static Windows.UI.Xaml.Shapes.Path GetGeometry(double width, double widthPoint1, double widthPoint2, double widthPoint3, double heightPoint1, double heightPoint2, SolidColorBrush color)
{
Windows.UI.Xaml.Shapes.Path myPath = new Windows.UI.Xaml.Shapes.Path();
myPath.Stroke = color;
myPath.StrokeThickness = 15;
LineGeometry myLineGeometry = new LineGeometry();
myLineGeometry.StartPoint = new Point(widthPoint1, heightPoint2);
myLineGeometry.EndPoint = new Point(widthPoint1, heightPoint1);
ArcSegment arc2 = new ArcSegment();
arc2.Point = new Point(widthPoint2, heightPoint1);
arc2.RotationAngle = 180;
arc2.SweepDirection = SweepDirection.Clockwise;
arc2.Size = new Size((double)(width / 6), heightPoint1);
LineGeometry line3 = new LineGeometry();
line3.StartPoint = new Point(widthPoint2, heightPoint1);
line3.EndPoint = new Point(widthPoint2, heightPoint2);
ArcSegment arc4 = new ArcSegment();
arc4.Point = new Point(widthPoint3, heightPoint2);
arc4.RotationAngle = 180;
arc4.SweepDirection = SweepDirection.Clockwise;
arc4.Size = new Size(width / 12, heightPoint1 / 2);
LineGeometry line5 = new LineGeometry();
line5.StartPoint = new Point(widthPoint3, heightPoint2);
line5.EndPoint = new Point(widthPoint3, heightPoint1);
PathFigure pathfigureforarc2 = new PathFigure();
pathfigureforarc2.StartPoint = new Point(widthPoint1, heightPoint1);
pathfigureforarc2.Segments.Add(arc2);
pathfigureforarc2.IsFilled = false;
PathFigure pathfigureforarc4 = new PathFigure();
pathfigureforarc4.StartPoint = new Point(widthPoint2, heightPoint2);
pathfigureforarc4.Segments.Add(arc4);
pathfigureforarc4.IsFilled = false;
PathGeometry pathgeoforarc2 = new PathGeometry();
pathgeoforarc2.Figures.Add(pathfigureforarc2);
PathGeometry pathgeoforarc4 = new PathGeometry();
pathgeoforarc4.Figures.Add(pathfigureforarc4);
GeometryGroup myGeometryGroup = new GeometryGroup();
myGeometryGroup.Children.Add(myLineGeometry);
myGeometryGroup.Children.Add(pathgeoforarc2);
myGeometryGroup.Children.Add(line3);
myGeometryGroup.Children.Add(pathgeoforarc4);
myGeometryGroup.Children.Add(line5);
myPath.Data = myGeometryGroup;
return myPath;
}
private void drawLine(Point point1, Point point2, int lineThickness, Color strokeColor)
{
LineGeometry line = new LineGeometry();
Path linePath = new Path();
line.StartPoint = point1;
line.EndPoint = point2;
linePath.Data = line;
linePath.Stroke = new SolidColorBrush(strokeColor);
linePath.StrokeThickness = lineThickness;
activeCanvas.Children.Add(linePath);
}
public static void Write(this StreamGeometryContext ctx, LineGeometry lineGeometry)
{
ctx.BeginFigure(lineGeometry.StartPoint, false);
ctx.LineTo(lineGeometry.EndPoint, true, false);
ctx.SetClosedState(true);
}
