public static ArcModelMini GetArcParametersFromThreePoints(UnitPoint startPoint, UnitPoint midPoint, UnitPoint endPoint)
{
ArcModelMini arcModel = new ArcModelMini();
arcModel.Clockwise = HitUtil.IsClockwiseByCross(startPoint, midPoint, endPoint);
arcModel.Center = HitUtil.CenterPointFrom3Points(startPoint, midPoint, endPoint);
arcModel.Radius = (float)HitUtil.Distance(arcModel.Center, startPoint);
arcModel.StartAngle = (float)HitUtil.RadiansToDegrees(HitUtil.LineAngleR(arcModel.Center, startPoint, 0));
float EndAngle = (float)HitUtil.RadiansToDegrees(HitUtil.LineAngleR(arcModel.Center, endPoint, 0));
arcModel.SweepAngle = (float)HitUtil.CalAngleSweep(arcModel.StartAngle, EndAngle, arcModel.Clockwise);
return(arcModel);
}
/// <summary>
/// 直线与直线，补偿求交点
/// </summary>
/// <param name="p1"></param>
/// <param name="p2"></param>
/// <param name="p3"></param>
/// <param name="indexCur"></param>
/// <returns></returns>
private static List <UnitPointBulge> CalCompensationsBy2Line(UnitPointBulge p1, UnitPointBulge p2, UnitPointBulge p3, int indexCur, CompensationModel compensationParam, bool isOutside)
{
var retPoints = new List <UnitPointBulge>();
var cPoints1 = GetCompensationsPoint(p1, p2, compensationParam.Size, isOutside);
var cPoints2 = GetCompensationsPoint(p2, p3, compensationParam.Size, isOutside);
//如果两点距离在误差范围内，当做同一个点处理
if (HitUtil.Distance(cPoints1.Item2.Point, cPoints2.Item1.Point) < errorRange)
{
retPoints.Add(new UnitPointBulge(cPoints1.Item2.Point, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
return(retPoints);
}
var line1 = DrawingOperationHelper.GetLineEquation(cPoints1.Item1.Point, cPoints1.Item2.Point);
var line2 = DrawingOperationHelper.GetLineEquation(cPoints2.Item1.Point, cPoints2.Item2.Point);
UnitPoint point = DrawingOperationHelper.GetIntersectionPointBy2Line(line1.Item1, line1.Item2, line1.Item3, line2.Item1, line2.Item2, line2.Item3);
if (double.IsNaN(point.X) || double.IsNaN(point.Y))
{
//平行
retPoints.Add(new UnitPointBulge(cPoints1.Item2.Point, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
return(retPoints);
}
else
{
bool pointInLine = HitUtil.IsPointInLine(cPoints1.Item1.Point, cPoints1.Item2.Point, point, errorRange);
if (compensationParam.IsSmooth && !pointInLine)
{
//圆角处理，转换为带弧度的点
bool closewise = HitUtil.IsClockwiseByCross(cPoints1.Item1.Point, cPoints1.Item2.Point, p2.Point);
double bulge = BulgeHelper.GetBulgeFromTwoPointsAndCenter(p2.Point, cPoints1.Item2.Point, cPoints2.Item1.Point, closewise);
retPoints.Add(new UnitPointBulge(cPoints1.Item2.Point, bulge, hasMicroConn: p2.HasMicroConn, position: -1 - indexCur));
retPoints.Add(new UnitPointBulge(cPoints2.Item1.Point, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
return(retPoints);
}
else
{
retPoints.Add(new UnitPointBulge(point, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
return(retPoints);
}
}
}
/// <summary>
/// 圆弧到直线，补偿求交点
/// </summary>
/// <param name="p1"></param>
/// <param name="p2"></param>
/// <param name="p3"></param>
/// <param name="indexCur"></param>
/// <returns></returns>
private static List <UnitPointBulge> CalCompensationsByArcLine(UnitPointBulge p1, UnitPointBulge p2, UnitPointBulge p3, int indexCur, CompensationModel compensationParam, bool isOutside)
{
var retPoints = new List <UnitPointBulge>();
ArcModelMini arc = DrawingOperationHelper.GetArcParametersFromBulge(p1.Point, p2.Point, (float)p1.Bulge);
var cPoints = GetCompensationsPoint(p2, p3, compensationParam.Size, isOutside);
double r = arc.Clockwise ? arc.Radius - compensationParam.Size : arc.Radius + compensationParam.Size;
if (isOutside)
{
r = arc.Clockwise ? arc.Radius + compensationParam.Size : arc.Radius - compensationParam.Size;
}
UnitPoint point1 = HitUtil.GetLinePointByDistance(arc.Center, p2.Point, r, true);
//如果两点距离在误差范围内，当做同一个点处理
if (HitUtil.Distance(point1, cPoints.Item1.Point) < errorRange)
{
retPoints.Add(new UnitPointBulge(point1, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
return(retPoints);
}
var line = DrawingOperationHelper.GetLineEquation(cPoints.Item1.Point, cPoints.Item2.Point);
var intersects = DrawingOperationHelper.GetIntersectPointByLineAndCircle(line.Item1, line.Item2, line.Item3, arc.Center, r);
var validPoint = new UnitPoint(double.NaN, double.NaN);
UnitPoint intersecteArcPoint = new UnitPoint(double.NaN, double.NaN);
//筛选有交点,如果有两个点就选距离p2近的点
if (intersects.Count == 1)
{
validPoint = intersects[0];
}
else if (intersects.Count == 2)
{
validPoint = HitUtil.Distance(intersects[0], p2.Point) < HitUtil.Distance(intersects[1], p2.Point) ? intersects[0] : intersects[1];
}
if (validPoint.IsEmpty) //|| !HitUtil.IsPointInLine(cPoints.Item1.Point, cPoints.Item2.Point, validPoint, errorRange))
{
//求圆弧的切线的交点
if (arc.Clockwise != HitUtil.IsClockwiseByCross(p2.Point, point1, cPoints.Item1.Point))
{
var l1 = DrawingOperationHelper.GetLineEquationByVerticalLine(point1, p2.Point);
intersecteArcPoint = DrawingOperationHelper.GetIntersectionPointBy2Line(l1.Item1, l1.Item2, l1.Item3, line.Item1, line.Item2, line.Item3);
}
}
bool completedSmooth = false; //是否完成圆角处理
if (compensationParam.IsSmooth) //圆角处理
{
if (!intersecteArcPoint.IsEmpty ||
(!validPoint.IsEmpty && !HitUtil.IsPointInLine(cPoints.Item1.Point, cPoints.Item2.Point, validPoint, errorRange)))
{
bool closewise = HitUtil.IsClockwiseByCross(p2.Point, cPoints.Item1.Point, cPoints.Item2.Point);
double bulge = BulgeHelper.GetBulgeFromTwoPointsAndCenter(p2.Point, point1, cPoints.Item1.Point, closewise);
retPoints.Add(new UnitPointBulge(point1, bulge, hasMicroConn: p2.HasMicroConn, position: -1 - indexCur));
retPoints.Add(new UnitPointBulge(cPoints.Item1.Point, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
completedSmooth = true;
}
}
if (!completedSmooth)
{
if (!intersecteArcPoint.IsEmpty)
{
retPoints.Add(new UnitPointBulge(point1, position: indexCur));
retPoints.Add(new UnitPointBulge(intersecteArcPoint, position: indexCur));
}
else if (!validPoint.IsEmpty)
{
retPoints.Add(new UnitPointBulge(validPoint, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
return(retPoints);
}
else
{
retPoints.Add(new UnitPointBulge(point1, position: indexCur));
retPoints.Add(new UnitPointBulge(p2.Point, position: indexCur));
retPoints.Add(new UnitPointBulge(cPoints.Item1.Point, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
}
}
return(retPoints);
}
/// <summary>
/// 圆弧到圆弧,补偿求交点
/// </summary>
/// <param name="p1"></param>
/// <param name="p2"></param>
/// <param name="p3"></param>
/// <param name="indexCur"></param>
/// <returns></returns>
private static List <UnitPointBulge> CalCompensationsBy2Arc(UnitPointBulge p1, UnitPointBulge p2, UnitPointBulge p3, int indexCur, CompensationModel compensationParam, bool isOutside)
{
var retPoints = new List <UnitPointBulge>();
ArcModelMini arc1 = DrawingOperationHelper.GetArcParametersFromBulge(p1.Point, p2.Point, (float)p1.Bulge);
ArcModelMini arc2 = DrawingOperationHelper.GetArcParametersFromBulge(p2.Point, p3.Point, (float)p2.Bulge);
double r1 = arc1.Clockwise ? arc1.Radius - compensationParam.Size : arc1.Radius + compensationParam.Size;
double r2 = arc2.Clockwise ? arc2.Radius - compensationParam.Size : arc2.Radius + compensationParam.Size;
if (isOutside)
{
r1 = arc1.Clockwise ? arc1.Radius + compensationParam.Size : arc1.Radius - compensationParam.Size;
r2 = arc2.Clockwise ? arc2.Radius + compensationParam.Size : arc2.Radius - compensationParam.Size;
}
UnitPoint point1 = HitUtil.GetLinePointByDistance(arc1.Center, p2.Point, r1, true);
UnitPoint point2 = HitUtil.GetLinePointByDistance(arc2.Center, p2.Point, r2, true);
if (HitUtil.Distance(point1, point2) < errorRange)
{
retPoints.Add(new UnitPointBulge(point2, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
return(retPoints);
}
var intersects = DrawingOperationHelper.GetIntersectPointBy2Circle(arc1.Center, r1, arc2.Center, r2);
var validPoint = new UnitPoint(double.NaN, double.NaN);
UnitPoint intersecteArcPoint = new UnitPoint(double.NaN, double.NaN);
//筛选有交点,如果有两个点就选距离p2近的点
if (intersects.Count == 1)
{
validPoint = intersects[0];
}
else if (intersects.Count == 2)
{
validPoint = HitUtil.Distance(intersects[0], p2.Point) < HitUtil.Distance(intersects[1], p2.Point) ? intersects[0] : intersects[1];
}
bool closewise = HitUtil.IsClockwiseByCross(p2.Point, point1, point2);
if (validPoint.IsEmpty)
{
if (arc1.Clockwise != closewise || arc2.Clockwise != closewise)//求两个圆弧的切线的交点
{
var line1 = DrawingOperationHelper.GetLineEquationByVerticalLine(point1, arc1.Center);
var line2 = DrawingOperationHelper.GetLineEquationByVerticalLine(point2, arc2.Center);
intersecteArcPoint = DrawingOperationHelper.GetIntersectionPointBy2Line(line1.Item1, line1.Item2, line1.Item3, line2.Item1, line2.Item2, line2.Item3);
}
}
bool completedSmooth = false; //是否完成圆角处理
if (compensationParam.IsSmooth) //圆角处理
{
bool needSmooth = false;
if (!validPoint.IsEmpty)
{
double lineAngle = HitUtil.LineAngleR(arc1.Center, validPoint, 0);
bool pointInArc = HitUtil.IsPointInArc(HitUtil.RadiansToDegrees(lineAngle), HitUtil.RadiansToDegrees(arc1.StartAngle), HitUtil.RadiansToDegrees(arc1.EndAngle), arc1.Clockwise);
needSmooth = !pointInArc;
}
if (!intersecteArcPoint.IsEmpty || needSmooth)
{
double bulge = BulgeHelper.GetBulgeFromTwoPointsAndCenter(p2.Point, point1, point2, closewise);
retPoints.Add(new UnitPointBulge(point1, bulge, hasMicroConn: p2.HasMicroConn, position: -1 - indexCur));
retPoints.Add(new UnitPointBulge(point2, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
completedSmooth = true;
}
}
if (!completedSmooth)
{
if (!validPoint.IsEmpty)
{
retPoints.Add(new UnitPointBulge(validPoint, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
return(retPoints);
}
else if (!intersecteArcPoint.IsEmpty)
{
retPoints.Add(new UnitPointBulge(point1, position: indexCur));
retPoints.Add(new UnitPointBulge(intersecteArcPoint, position: indexCur));
retPoints.Add(new UnitPointBulge(point2, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
}
else
{
retPoints.Add(new UnitPointBulge(point1, position: indexCur));
retPoints.Add(new UnitPointBulge(p2.Point, position: indexCur));
retPoints.Add(new UnitPointBulge(point2, p2.Bulge, hasMicroConn: p2.HasMicroConn, position: indexCur));
}
}
return(retPoints);
}
public static List <IDrawObject> GetBridgeObjects(List <IDrawObject> drawObjects, UnitPoint p1, UnitPoint p2, BridgingModel param, out bool isChanged)
{
isChanged = false;//桥接是否改变了图形
List <BridgePoints> bridgePoints = new List <BridgePoints>();
#region 计算桥接点在图形中的点的坐标
drawObjects?.ForEach(drawObject =>
{
if ((drawObject.FigureType == FigureTypes.Circle))
{
Circle circle = drawObject as Circle;
var bridges = BridgeHelper.GetBridgeByCircle(circle, p1, p2, param);
bridgePoints.AddRange(bridges);
}
else if (drawObject.FigureType == FigureTypes.Arc)
{
ArcBase arc = drawObject as ArcBase;
var bridges = BridgeHelper.GetBridgeByArc(arc, p1, p2, param);
bridgePoints.AddRange(bridges);
}
else if (drawObject.FigureType == FigureTypes.LwPolyline)
{
MultiSegmentLineBase multiSegLine = drawObject as MultiSegmentLineBase;
var bridges = BridgeHelper.GetBridgeByMultiSegLine(multiSegLine, p1, p2, param);
bridgePoints.AddRange(bridges);
}
});
#endregion
#region 根据桥接点坐标，按直线的起点距离排序,如果奇数个将移除最后一个，保证偶数个可以连接
bridgePoints.Sort((x, y) => { if (x.Distance > y.Distance)
{
return(1);
}
return(-1); });
if (bridgePoints.Count % 2 == 1)
{
bridgePoints.RemoveAt(bridgePoints.Count - 1);
}
#endregion
#region 移除间距大于最大条件的点
List <BridgePoints> removes = new List <BridgePoints>();
for (int i = 0; i < bridgePoints.Count - 1; i += 2)
{
var bridge1 = bridgePoints[i];
var bridge2 = bridgePoints[i + 1];
if (Math.Abs(bridge1.Distance - bridge2.Distance) > param.MaxDistance)
{
removes.Add(bridge1);
removes.Add(bridge2);
}
}
removes.ForEach(e => bridgePoints.Remove(e));
#endregion
if (bridgePoints.Count > 0)
{
List <IDrawObject> temps = new List <IDrawObject>(); //计算后的图形
List <IDrawObject> oldDraws = new List <IDrawObject>(); //不用计算的原图
#region 根据桥接点的位置把原图形拆为多段线
foreach (IDrawObject drawObject in drawObjects)
{
var points = bridgePoints.FindAll(b => b.Owner == drawObject);
if (points.Count > 0)
{
List <IDrawObject> draws = null;
if (drawObject.FigureType == FigureTypes.Circle)
{
draws = BridgeHelper.ConvertToMultiSegLine(drawObject as Circle, points);
}
else if (drawObject.FigureType == FigureTypes.Arc)
{
draws = BridgeHelper.ConvertToMultiSegLine(drawObject as ArcBase, points);
}
else if (drawObject.FigureType == FigureTypes.LwPolyline)
{
draws = BridgeHelper.ConvertToMultiSegLine(drawObject as MultiSegmentLineBase, points);
}
if (draws != null)
{
draws.RemoveAll(p => (p as MultiSegmentLineBase).Points.Count < 2);
temps.AddRange(draws);
}
}
else
{
oldDraws.Add(drawObject);
}
}
#endregion
#region 连接最新的桥接图形
for (int i = 0; i < bridgePoints.Count - 1; i += 2)
{
var bridge1 = bridgePoints[i];
var bridge2 = bridgePoints[i + 1];
bool clockwise1 = HitUtil.IsClockwiseByCross(p1, p2, bridge1.Point1.Point);
bool clockwise2 = HitUtil.IsClockwiseByCross(p1, p2, bridge2.Point1.Point);
UnitPointBulge point11 = !clockwise1 ? bridge1.Point1 : bridge1.Point2;
UnitPointBulge point12 = clockwise1 ? bridge1.Point1 : bridge1.Point2;
UnitPointBulge point21 = !clockwise2 ? bridge2.Point1 : bridge2.Point2;
UnitPointBulge point22 = clockwise2 ? bridge2.Point1 : bridge2.Point2;
MultiSegmentLineBase draw11 = temps.Find(d => (d as MultiSegmentLineBase).Points.Contains(point11)) as MultiSegmentLineBase;
MultiSegmentLineBase draw12 = temps.Find(d => (d as MultiSegmentLineBase).Points.Contains(point12)) as MultiSegmentLineBase;
MultiSegmentLineBase draw21 = temps.Find(d => (d as MultiSegmentLineBase).Points.Contains(point21)) as MultiSegmentLineBase;
MultiSegmentLineBase draw22 = temps.Find(d => (d as MultiSegmentLineBase).Points.Contains(point22)) as MultiSegmentLineBase;
if (draw11 == null)
{
draw11 = new MultiSegmentLineBase()
{
LayerId = (bridge1.Owner as DrawObjectBase).LayerId, GroupParam = CopyUtil.DeepCopy(bridge1.Owner.GroupParam), Points = new List <UnitPointBulge>()
};
}
if (draw12 == null)
{
draw12 = new MultiSegmentLineBase()
{
LayerId = (bridge1.Owner as DrawObjectBase).LayerId, GroupParam = CopyUtil.DeepCopy(bridge1.Owner.GroupParam), Points = new List <UnitPointBulge>()
};
}
if (draw21 == null)
{
draw21 = new MultiSegmentLineBase()
{
LayerId = (bridge2.Owner as DrawObjectBase).LayerId, GroupParam = CopyUtil.DeepCopy(bridge2.Owner.GroupParam), Points = new List <UnitPointBulge>()
};
}
if (draw22 == null)
{
draw22 = new MultiSegmentLineBase()
{
LayerId = (bridge2.Owner as DrawObjectBase).LayerId, GroupParam = CopyUtil.DeepCopy(bridge2.Owner.GroupParam), Points = new List <UnitPointBulge>()
};
}
#region 组合多段线
if (draw11 == draw12 && draw21 == draw22)
{
if (draw11.Points.Count > 0 && draw11.Points[0] == point11)
{
draw11.ReverseDirection();
}
if (draw21.Points.Count > 0 && draw21.Points[0] != point21)
{
draw11.ReverseDirection();
}
if (draw11.Points.Count > 0)
{
draw11.Points[draw11.Points.Count - 1].Bulge = double.NaN;
}
if (draw21.Points.Count > 0)
{
draw21.Points[draw21.Points.Count - 1].Bulge = double.NaN;
}
draw11.Points.AddRange(draw21.Points);
draw11.IsCloseFigure = true;
temps.Remove(draw21);
}
else if (draw11 == draw12 && draw21 != draw22)
{
if (draw21.Points.Count > 0 && draw21.Points[0] == point21)
{
draw21.ReverseDirection();
}
if (draw22.Points.Count > 0 && draw22.Points[0] != point22)
{
draw22.ReverseDirection();
}
if (draw11.Points.Count > 0 && draw11.Points[0] != point11)
{
draw11.ReverseDirection();
}
if (draw21.Points.Count > 0)
{
draw21.Points[draw21.Points.Count - 1].Bulge = double.NaN;
}
if (draw11.Points.Count > 0)
{
draw11.Points[draw11.Points.Count - 1].Bulge = double.NaN;
}
draw21.Points.AddRange(draw11.Points);
draw21.Points.AddRange(draw22.Points);
temps.Remove(draw11);
temps.Remove(draw22);
}
else if (draw11 != draw12 && draw21 == draw22)
{
if (draw11.Points.Count > 0 && draw11.Points[0] == point11)
{
draw11.ReverseDirection();
}
if (draw21.Points.Count > 0 && draw21.Points[0] != point21)
{
draw21.ReverseDirection();
}
if (draw12.Points.Count > 0 && draw12.Points[0] != point12)
{
draw12.ReverseDirection();
}
if (draw11.Points.Count > 0)
{
draw11.Points[draw11.Points.Count - 1].Bulge = double.NaN;
}
if (draw21.Points.Count > 0)
{
draw21.Points[draw21.Points.Count - 1].Bulge = double.NaN;
}
draw11.Points.AddRange(draw21.Points);
draw11.Points.AddRange(draw12.Points);
temps.Remove(draw21);
temps.Remove(draw12);
}
else if (draw11 == draw21 && draw12 == draw22)
{
if (draw11.Points.Count > 0 && draw11.Points[0] != point11)
{
draw11.ReverseDirection();
}
if (draw12.Points.Count > 0 && draw12.Points[0] != point12)
{
draw12.ReverseDirection();
}
if (draw11.Points.Count > 0)
{
draw11.Points[draw11.Points.Count - 1].Bulge = double.NaN;
}
if (draw12.Points.Count > 0)
{
draw12.Points[draw12.Points.Count - 1].Bulge = double.NaN;
}
draw11.IsCloseFigure = true;
draw12.IsCloseFigure = true;
}
else if (draw11 == draw21 && draw12 != draw22)
{
if (draw11.Points.Count > 0 && draw11.Points[0] != point11)
{
draw11.ReverseDirection();
}
if (draw12.Points.Count > 0 && draw12.Points[0] == point12)
{
draw12.ReverseDirection();
}
if (draw22.Points.Count > 0 && draw22.Points[0] != point22)
{
draw22.ReverseDirection();
}
if (draw11.Points.Count > 0)
{
draw11.Points[draw11.Points.Count - 1].Bulge = double.NaN;
}
if (draw12.Points.Count > 0)
{
draw12.Points[draw12.Points.Count - 1].Bulge = double.NaN;
}
draw11.IsCloseFigure = true;
draw12.Points.AddRange(draw22.Points);
temps.Remove(draw22);
}
else if (draw11 != draw21 && draw12 == draw22)
{
if (draw12.Points.Count > 0 && draw12.Points[0] != point12)
{
draw12.ReverseDirection();
}
if (draw11.Points.Count > 0 && draw11.Points[0] == point11)
{
draw11.ReverseDirection();
}
if (draw21.Points.Count > 0 && draw21.Points[0] != point21)
{
draw21.ReverseDirection();
}
if (draw12.Points.Count > 0)
{
draw12.Points[draw12.Points.Count - 1].Bulge = double.NaN;
}
if (draw11.Points.Count > 0)
{
draw11.Points[draw11.Points.Count - 1].Bulge = double.NaN;
}
draw12.IsCloseFigure = true;
draw11.Points.AddRange(draw21.Points);
temps.Remove(draw21);
}
else
{
if (draw11.Points.Count > 0 && draw11.Points[0] == point11)
{
draw11.ReverseDirection();
}
if (draw21.Points.Count > 0 && draw21.Points[0] != point21)
{
draw21.ReverseDirection();
}
if (draw12.Points.Count > 0 && draw12.Points[0] == point12)
{
draw12.ReverseDirection();
}
if (draw22.Points.Count > 0 && draw22.Points[0] != point22)
{
draw22.ReverseDirection();
}
if (draw11.Points.Count > 0)
{
draw11.Points[draw11.Points.Count - 1].Bulge = double.NaN;
}
if (draw12.Points.Count > 0)
{
draw12.Points[draw12.Points.Count - 1].Bulge = double.NaN;
}
draw11.Points.AddRange(draw21.Points);
draw12.Points.AddRange(draw22.Points);
temps.Remove(draw21);
temps.Remove(draw22);
}
#endregion
}
#endregion
isChanged = true;
temps.ForEach(d => d.Update());
temps.AddRange(oldDraws);
return(temps);
}
return(drawObjects);
}
