public static bool DeleteTerrain(string nodeNamesStr)
{
bool b = false;
try
{
//从setup文件中删除有关地形的相应的段
MainWindow.setupStr = MainWindow.setupStr.Remove(MainWindow.setupStr.IndexOf("begin_<globals>"), MainWindow.setupStr.IndexOf("end_<globals>") - MainWindow.setupStr.IndexOf("begin_<globals>") + 15);
MainWindow.setupStr = MainWindow.setupStr.Remove(MainWindow.setupStr.IndexOf("begin_<studyarea>"), MainWindow.setupStr.IndexOf("end_<studyarea>") - MainWindow.setupStr.IndexOf("begin_<studyarea>") + "end_<studyarea>".Length + 2);
MainWindow.setupStr = MainWindow.setupStr.Remove(MainWindow.setupStr.IndexOf("begin_<feature>"), MainWindow.setupStr.IndexOf("end_<feature>") - MainWindow.setupStr.IndexOf("begin_<feature>") + "end_<feature>".Length + 2);
//从工程树中删除原来的地形结点
MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes[0].Nodes.Remove(MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes[0].Nodes[0]);
//在.info文件中找出地形的名字，经纬度的大小字符串
string iniTerrain = StringFound.FoundBackStr("<terrain>", nodeNamesStr, false);
string iniLongitude = StringFound.FoundBackStr("<longitude>", nodeNamesStr, false);
string iniLatitude = StringFound.FoundBackStr("<latitude>", nodeNamesStr, false);
//从info文件中删除原来添加的地形的相关信息，然后将删除后的字符串写到info文件中
nodeNamesStr = nodeNamesStr.Remove(nodeNamesStr.IndexOf("<terrain>"), 12 + iniTerrain.Length);
nodeNamesStr = nodeNamesStr.Remove(nodeNamesStr.IndexOf("<longitude>"), 14 + iniLongitude.Length);
nodeNamesStr = nodeNamesStr.Remove(nodeNamesStr.IndexOf("<latitude>"), 13 + iniLatitude.Length);
FileOperation.WriteFile(nodeNamesStr, MainWindow.nodeInfoFullPath, false);
//将原来添加的地形从工程文件中删除
File.Delete(MainWindow.projectRealPath + "\\" + iniTerrain);
File.Delete(MainWindow.projectRealPath + "\\" + iniTerrain + ".terinfo");
b = true;
}
catch (Exception e)
{
//如果捕获到异常，则表示删除失败。
LogFileManager.ObjLog.fatal(e.Message, e);
b = false;
}
return(b);
}
//根据索引字符串找出其后的yes或no,再根据CheckBox的状态去修改yes或no
void ResultSet(CheckBox ch, string indexStr)
{
int site = MainWindow.setupStr.IndexOf(indexStr) + indexStr.Length + 1;
//找出yes或no
string initStr = StringFound.FoundBackStr(indexStr, MainWindow.setupStr, true);
//当初始是no
if (initStr.Equals("no"))
{
//如果CheckBox被选中
if (ch.Checked)
{
MainWindow.setupStr = MainWindow.setupStr.Remove(site, 2);
MainWindow.setupStr = MainWindow.setupStr.Insert(site, "yes");
}
}
//当初始是yes
else
{
//CheckBox没被选中
if (!ch.Checked)
{
MainWindow.setupStr = MainWindow.setupStr.Remove(site, 3);
MainWindow.setupStr = MainWindow.setupStr.Insert(site, "no");
}
}
}
//当单击删除时执行此函数
public static bool ReceiverDelMenu(TreeNode currentNode)
{
bool b = false;
DialogResult result = MessageBox.Show("您确定要删除\"" + currentNode.Text + "\"接收机吗？", "提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Question);
if (result == DialogResult.OK)
{
try
{
//分别调用上面的三个函数
if (ReceiverDelOfRxAndInfoFile(currentNode) && ReceiverDelOfWaveInfo(currentNode) && ReceiverUpdateOfSetup())
{
switch (currentNode.Parent.Text)
{
case "点状分布":
//删除match文件中有关辐射源的信息
StringFound.DelBackIndStr(SetupContent.pointReceiverOfRxStr0 + " " + currentNode.Text + "*");
break;
case "区域分布":
StringFound.DelBackIndStr(SetupContent.gridReceiverOfRxStr0 + " " + currentNode.Text + "*");
break;
}
b = true;
}
}
catch (Exception e)
{
LogFileManager.ObjLog.fatal(e.Message, e);
//b = false;
//MainWindow.IsReturnMidwayInNewProcess = true;
}
}
return(b);
}
//将单击确定按钮后新插入的接收机的编号替换为原来的编号，并利用原来保存的位置信息写到相应的文件中
private static bool rxStrRecoverInitReceiverNum(TreeNode currentNode, string initReceiverNum, int initialReceiverBlockSite, int initialReceiverNodeSite)
{
bool b = false;
//将单击新建接收机窗口中确定按钮后rx文件中新插入的接收机块提取出来 放在newInsertReceiverBlock
try
{
string rxFilePath = MainWindow.projectRealPath + "\\" + MainWindow.onlyProjectName + ".rx";
string rxFileStr = FileOperation.ReadFile(rxFilePath);
string beginStr = null;
string endStr = null;
switch (currentNode.Parent.Text)
{
case "点状分布":
beginStr = SetupContent.pointReceiverOfRxStr0;
endStr = SetupContent.transmitterStr24OfTr;
break;
case "区域分布":
beginStr = SetupContent.gridReceiverOfRxStr0;
endStr = SetupContent.gridReceiverOfRxStr11;
break;
}
int start = rxFileStr.LastIndexOf(beginStr);
int end = rxFileStr.LastIndexOf(endStr) + endStr.Length + 2;
//提取出来单击新建接收机确定按钮后的新添加的相应的接收机块
string newInsertReceiverBlock = rxFileStr.Substring(start, end - start);
//将新增加的接收机块删除
rxFileStr = rxFileStr.Remove(start, end - start);
string receiverName = StringFound.FoundBackStr(beginStr, newInsertReceiverBlock, true);
//获得新增加接收机的编号
string newReceiverNum = GetReceiverNumLine(beginStr, receiverName, newInsertReceiverBlock);
//用原来接收机的编号去代替新加接收机的编号
newInsertReceiverBlock = newInsertReceiverBlock.Replace(newReceiverNum, initReceiverNum);
//将修改了接收机编号后的接收机块插入到setupStr中
rxFileStr = rxFileStr.Insert(initialReceiverBlockSite, newInsertReceiverBlock);
FileOperation.WriteFile(rxFileStr, rxFilePath, false);
string receiverNodeInfo = FileOperation.ReadFile(MainWindow.nodeInfoFullPath);
//将更改后的接收机信息插入到原来的位置
receiverNodeInfo = receiverNodeInfo.Insert(initialReceiverNodeSite, beginStr + " " + receiverName + "\r\n");
//在info文件中删除增加的接收机结点信息
receiverNodeInfo = receiverNodeInfo.Remove(receiverNodeInfo.LastIndexOf(beginStr));
FileOperation.WriteFile(receiverNodeInfo, MainWindow.nodeInfoFullPath, false);
b = true;
}
catch (Exception e)
{
LogFileManager.ObjLog.fatal(e.Message, e);
//return false;
}
return(b);
}
//选中天线后，波形自动加载
private void newTransmitterAntennaName_comboBox3_SelectedValueChanged(object sender, EventArgs e)
{
if (File.Exists(MainWindow.relationOfAntAndWavePath))
{
string antennaAndWaveStr = FileOperation.ReadFile(MainWindow.relationOfAntAndWavePath);
string waveOfAntenna = StringFound.FoundBackStr(SetupContent.antennaIndeStr + " " + (string)newTransmitterAntennaName_comboBox3.SelectedItem + "#", antennaAndWaveStr);
//char[] sep = { '#' };
//string[] waveStr = waveOfAntenna.Split(sep);
//newTransmitterWaveformName_textBox1.Text = waveStr[1];
newTransmitterWaveformName_textBox1.Text = waveOfAntenna;
}
}
private static bool setupStrRecoverInitWaveformNum(TreeNode currentNode, string initWaveformNum, int initialWaveformBlockSite, int initialWaveformNodeSite)
{
bool b = false;
//将单击新建波形窗口中确定按钮后插入的新波形块提取出来 放在newInsertAntennaBlock
try
{
int start = MainWindow.setupStr.LastIndexOf(SetupContent.waveFormStr1);
int end = MainWindow.setupStr.LastIndexOf(SetupContent.waveFormStr2 + "\r\n") + (SetupContent.waveFormStr2 + "\r\n").Length;
//提取出来单击新建天线确定按钮后的心添加的相应的天线块
string newInsertWaveformBlock = MainWindow.setupStr.Substring(start, end - start);
//将新增加的天线块删除
MainWindow.setupStr = MainWindow.setupStr.Remove(start, end - start);
string waveformName = StringFound.FoundBackStr(SetupContent.waveFormStr1, newInsertWaveformBlock, true);
//获得新增加天线的编号
string newAntennaNum = GetWaveformNumLine(waveformName, newInsertWaveformBlock);
//用原来天线的编号去代替新加天线的编号
newInsertWaveformBlock = newInsertWaveformBlock.Replace(newAntennaNum, initWaveformNum);
//将修改了天线编号后的天线块插入到setupStr中
MainWindow.setupStr = MainWindow.setupStr.Insert(initialWaveformBlockSite, newInsertWaveformBlock);
FileOperation.WriteFile(MainWindow.setupStr, MainWindow.mProjectFullName, false);
if (System.IO.File.Exists(MainWindow.relationOfAntAndWavePath))
{
string updatedWaveformAndAntennaMatch = FileOperation.ReadFile(MainWindow.relationOfAntAndWavePath);
updatedWaveformAndAntennaMatch = updatedWaveformAndAntennaMatch.Replace("#" + currentNode.Text + "\r\n", "#" + waveformName + "\r\n");
FileOperation.WriteFile(updatedWaveformAndAntennaMatch, MainWindow.relationOfAntAndWavePath, false);
}
string waveformNodeInfo = FileOperation.ReadFile(MainWindow.nodeInfoFullPath);
//在info文件中先删除增加的天线结点信息
waveformNodeInfo = waveformNodeInfo.Remove(waveformNodeInfo.LastIndexOf(SetupContent.waveFormStr1));
//将更改后的天线信息插入到原来的位置
waveformNodeInfo = waveformNodeInfo.Insert(initialWaveformNodeSite, SetupContent.waveFormStr1 + " " + waveformName + "\r\n");
FileOperation.WriteFile(waveformNodeInfo, MainWindow.nodeInfoFullPath, false);
b = true;
}
catch (Exception e)
{
LogFileManager.ObjLog.fatal(e.Message, e);
}
return(b);
}
//将更改后辐射源的编号调整为原来的编号
private static bool trStrRecoverInitTransmitterNum(string initTransmitterNum, int initialTransmitterBlockSite, int initialTransmitterNodeSite)
{
bool b = false;
//将单击新建波形窗口中确定按钮后tr文件中新插入的辐射源块提取出来 放在newInsertTransmitterBlock
try
{
string trFilePath = MainWindow.projectRealPath + "\\" + MainWindow.onlyProjectName + ".tx";
string trFileStr = FileOperation.ReadFile(trFilePath);
int start = trFileStr.LastIndexOf(SetupContent.transmitterStr1OfTr);
//int end = trFileStr.LastIndexOf(SetupContent.transmitterStr24OfTr + "\r\n") +( SetupContent.transmitterStr24OfTr + "\r\n").Length ;
int end = trFileStr.LastIndexOf("MHZ\r\n") + ("MHZ\r\n").Length;
//提取出来单击新建辐射源确定按钮后的新添加的相应的天线块
string newInsertTransmitterBlock = trFileStr.Substring(start, end - start);
//将新增加的辐射源块删除
trFileStr = trFileStr.Remove(start, end - start);
//在更改时可能会改变辐射源的名字，因此需要在提取出辐射源的名字
string transmitterName = StringFound.FoundBackStr(SetupContent.transmitterStr1OfTr, newInsertTransmitterBlock, true);
//获得新增加辐射源的编号
string newTransmitterNum = GetTransmitterNumLine(transmitterName, newInsertTransmitterBlock);
//用原来天线的编号去代替新加辐射源的编号
newInsertTransmitterBlock = newInsertTransmitterBlock.Replace(newTransmitterNum, initTransmitterNum);
//将修改了辐射源编号后的天线块写入到tr文件中
trFileStr = trFileStr.Insert(initialTransmitterBlockSite, newInsertTransmitterBlock);
FileOperation.WriteFile(trFileStr, trFilePath, false);
string transmitterNodeInfo = FileOperation.ReadFile(MainWindow.nodeInfoFullPath);
//将更改后的辐射源信息插入到原来的位置
transmitterNodeInfo = transmitterNodeInfo.Insert(initialTransmitterNodeSite, SetupContent.transmitterStr1Ofsetup + " " + transmitterName + "\r\n");
//在info文件中先删除增加的辐射源节点信息
transmitterNodeInfo = transmitterNodeInfo.Remove(transmitterNodeInfo.LastIndexOf(SetupContent.transmitterStr1Ofsetup));
FileOperation.WriteFile(transmitterNodeInfo, MainWindow.nodeInfoFullPath, false);
b = true;
}
catch (Exception e)
{
LogFileManager.ObjLog.fatal(e.Message, e);
}
return(b);
}
//删除辐射源后应及时更新setup文件中关于辐射源的信息
private static bool TransmitterUpdateOfSetup()
{
bool b = false;
string trFilePath = MainWindow.projectRealPath + "\\" + MainWindow.onlyProjectName + ".tx";
string trFileStr = FileOperation.ReadFile(trFilePath);
try
{
//当tr文件中的辐射源全部被删除时
if (trFileStr.Length <= 0)
{
//辐射源全部被删除时,要删除tr文件
File.Delete(trFilePath);
//辐射源全部被删除时,setup文件中关于辐射源的信息也要被删除
int start = MainWindow.setupStr.IndexOf(SetupContent.transmitterStr1Ofsetup + "\r\n");
int end = MainWindow.setupStr.IndexOf(SetupContent.transmitterStr4Ofsetup + "\r\n") + SetupContent.transmitterStr4Ofsetup.Length;
MainWindow.setupStr = MainWindow.setupStr.Remove(start, end - start);
//将删除辐射源后的setupStr保存到setup文件中
FileOperation.WriteFile(MainWindow.setupStr, MainWindow.mProjectFullName, false);
}
//当tr文件中的辐射源没有全部被删除时
else
{
//使setup文件中辐射源的数量减1
string transmitterCountStr = StringFound.FoundBackStr("\nFirstAvailableTxNumber", MainWindow.setupStr, true);
string transmitterCountLineOld = "\nFirstAvailableTxNumber " + transmitterCountStr + "\r\n";
int transmitterCount = int.Parse(transmitterCountStr);
transmitterCount = transmitterCount - 1;
string transmitterCountLineNew = "\nFirstAvailableTxNumber " + transmitterCount.ToString() + "\r\n";
MainWindow.setupStr = MainWindow.setupStr.Replace(transmitterCountLineOld, transmitterCountLineNew);
FileOperation.WriteFile(MainWindow.setupStr, MainWindow.mProjectFullName, false);
}
b = true;
}
catch (Exception e)
{
LogFileManager.ObjLog.fatal(e.Message, e);
}
return(b);
}
//从waveinfo文件中删除相应的辐射源信息
private static bool TransmitterDelOfWaveInfo(TreeNode currentNode)
{
bool b = false;
try
{
string transmitterAllInfo = FileOperation.ReadFile(MainWindow.waveinfoFilePath);
//只能用IndexOf(transmitterName)函数，因为"END" + antennaName也含有antennaName
string indStr = SetupContent.transmitterStr1Ofsetup + " " + currentNode.Text + "\r\n";
int delStart = transmitterAllInfo.IndexOf(indStr);
int delEnd = transmitterAllInfo.LastIndexOf("END" + indStr) + ("END" + indStr).Length;
transmitterAllInfo = transmitterAllInfo.Remove(delStart, delEnd - delStart);
FileOperation.WriteFile(transmitterAllInfo, MainWindow.waveinfoFilePath, false);
StringFound.DelBackIndStr(SetupContent.transmitterStr1Ofsetup + " " + currentNode.Text);
b = true;
}
catch (Exception ex)
{
LogFileManager.ObjLog.fatal(ex.Message, ex);
}
return(b);
}
//删除接收机时要更新setup文件中接收机的数目
private static bool ReceiverUpdateOfSetup()
{
bool b = false;
string rxFilePath = MainWindow.projectRealPath + "\\" + MainWindow.onlyProjectName + ".rx";
string rxFileStr = FileOperation.ReadFile(rxFilePath);
try
{
//如果接收机全部被删除
if (rxFileStr.Length <= 0)//删除后
{
File.Delete(rxFilePath);
int start = MainWindow.setupStr.IndexOf(SetupContent.receiverOfSetupStr0 + "\r\n");
int end = MainWindow.setupStr.IndexOf(SetupContent.receiverOfSetupStr3 + "\r\n") + (SetupContent.receiverOfSetupStr3 + "\r\n").Length;
MainWindow.setupStr = MainWindow.setupStr.Remove(start, end - start);
FileOperation.WriteFile(MainWindow.setupStr, MainWindow.mProjectFullName, false);
}
//接收机没有全部被删除
else
{
string receiverCountStr = StringFound.FoundBackStr("\nFirstAvailableRxNumber", MainWindow.setupStr, true);
string receiverCountLineOld = "\nFirstAvailableRxNumber " + receiverCountStr + "\r\n";
int receiverCount = int.Parse(receiverCountStr);
receiverCount = receiverCount - 1;
string receiverCountLineNew = "\nFirstAvailableRxNumber " + receiverCount.ToString() + "\r\n";
MainWindow.setupStr = MainWindow.setupStr.Replace(receiverCountLineOld, receiverCountLineNew);
FileOperation.WriteFile(MainWindow.setupStr, MainWindow.mProjectFullName, false);
}
b = true;
}
catch (Exception e)
{
LogFileManager.ObjLog.fatal(e.Message, e);
}
return(b);
}
//当单击删除时执行如下方法
public static bool AntennaDelMenu(TreeNode currentNode)
{
bool b = false;
if (!StringFound.WaveOrAntennaInUse(currentNode.Text, "antenna"))
{
DialogResult result = MessageBox.Show("您确定要删除\"" + currentNode.Text + "\"天线吗？", "提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Question);
if (result == DialogResult.OK)
{
//AntennaDelOfSetupAndInfo(currentNode);
//AntennaDelOfWaveInfo(currentNode);
if (AntennaDelOfSetupAndInfo(currentNode) && AntennaDelOfWaveInfo(currentNode))
{
StringFound.DelBackIndStr(SetupContent.antennaStr1 + " " + currentNode.Text + "#");
b = true;
}
}
}
else
{
MessageBox.Show("您所删除的天线正在被使用，请修改辐射源或接收机后再删除此天线！", "错误", MessageBoxButtons.OK, MessageBoxIcon.Stop);
}
return(b);
}
public static bool WaveformDelMenu(TreeNode currentNode)
{
bool b = false;
if (!StringFound.WaveOrAntennaInUse(currentNode.Text, "wave"))
{
DialogResult result = MessageBox.Show("您确定要删除\"" + currentNode.Text + "\"波形吗？", "提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Question);
if (result == DialogResult.OK)
{
//AntennaDelOfSetupAndInfo(currentNode);
//AntennaDelOfWaveInfo(currentNode);
if (WaveformDelOfSetupAndInfo(currentNode) && WaveformDelOfWaveInfo(currentNode))
{
b = true;
}
}
}
else
{
MessageBox.Show("您所删除的波形正在被使用，请修改天线后再删除此波形！", "错误", MessageBoxButtons.OK, MessageBoxIcon.Stop);
//b = true;
}
return(b);
}
//单击更新菜单时，执行下面的操作
public static bool AntennaUpdateMenu(TreeNode currentNode)
{
bool b = false;
//保存setup文件中的字符串
string setupStrTemp = MainWindow.setupStr;
int initialAntennaBlockSite;
string initAntennaNum = null;
string antennaNodeInfoTemp = null;
int initialAntennaNodeSite;
string antennaParStrTemp = null;
try
{
//保存天线在setup文件中的位置
initialAntennaBlockSite = MainWindow.setupStr.IndexOf(SetupContent.antennaStr1 + " " + currentNode.Text + "\r\n");
//保存info文件中的所有字符串，原来天线的编号也要保存下来
initAntennaNum = GetAntennaNumLine(currentNode.Text, MainWindow.setupStr);
antennaNodeInfoTemp = FileOperation.ReadFile(MainWindow.nodeInfoFullPath);
//保存天线在waveinfo文件中的位置信息
initialAntennaNodeSite = antennaNodeInfoTemp.IndexOf(SetupContent.antennaStr1 + " " + currentNode.Text + "\r\n");
antennaParStrTemp = FileOperation.ReadFile(MainWindow.waveinfoFilePath);
}
catch (Exception e)
{
return(false);
}
NewAntennaWindow newAntennaWin = new NewAntennaWindow();
//newAntennaWin.newdipolewaveformname_comboBox2.DropDownStyle = ComboBoxStyle.DropDown;
AntennaDataRecoverOfProjectTree.AlterationAntennaPar(currentNode, antennaParStrTemp, newAntennaWin);
//newAntennaWin.newdipolewaveformname_comboBox2.DropDownStyle = ComboBoxStyle.DropDownList;
if (!(AntennaDelOfSetupAndInfo(currentNode) && AntennaDelOfWaveInfo(currentNode)))
{
MessageBox.Show("文件被破坏，导致错误，原工程不可再用！", "错误", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return(false);
}
MainWindow.creatSuccMesDisp = false;
MainWindow.newFuncSign = false;
newAntennaWin.Text = "更改天线";
newAntennaWin.ShowDialog();
switch (newAntennaWin.DialogResult)
{
case DialogResult.OK:
if (MainWindow.IsReturnMidwayInNewProcess)
{
FileOperation.WriteFile(setupStrTemp, MainWindow.mProjectFullName, false);
MainWindow.setupStr = setupStrTemp;
FileOperation.WriteFile(antennaParStrTemp, MainWindow.waveinfoFilePath, false);
FileOperation.WriteFile(antennaNodeInfoTemp, MainWindow.nodeInfoFullPath, false);
MainWindow.IsReturnMidwayInNewProcess = false;
return(false);
}
StringFound.DelBackIndStr(SetupContent.antennaStr1 + " " + currentNode.Text + "#");
if (!setupStrRecoverInitAntennaNum(currentNode, initAntennaNum, initialAntennaBlockSite, initialAntennaNodeSite))
{
MessageBox.Show("程序内部发生错误！", "错误", MessageBoxButtons.OK, MessageBoxIcon.Stop);
FileOperation.WriteFile(setupStrTemp, MainWindow.mProjectFullName, false);
MainWindow.setupStr = setupStrTemp;
FileOperation.WriteFile(antennaParStrTemp, MainWindow.waveinfoFilePath, false);
FileOperation.WriteFile(antennaNodeInfoTemp, MainWindow.nodeInfoFullPath, false);
return(false);
}
MainWindow.staticTreeView.SelectedNode.Text = MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes[2].LastNode.Text;
MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes[2].LastNode.Remove();
b = true;
break;
default:
FileOperation.WriteFile(setupStrTemp, MainWindow.mProjectFullName, false);
MainWindow.setupStr = setupStrTemp;
FileOperation.WriteFile(antennaParStrTemp, MainWindow.waveinfoFilePath, false);
FileOperation.WriteFile(antennaNodeInfoTemp, MainWindow.nodeInfoFullPath, false);
b = false;
break;
}
//b = true;
return(b);
}
private void OpenToolStripMenuItem_Click(object sender, EventArgs e)
{
LogFileManager.ObjLog.info("Begin");
if (mProjectFullName != null)
{
DialogResult result = MessageBox.Show("您是否要打开一个新的工程？若是则原工程将被关闭。", "提醒", MessageBoxButtons.OKCancel, MessageBoxIcon.Information);
if (DialogResult.OK == result)
{
MainWindow.staticTreeView.Nodes[0].Nodes[0].Remove();
}
else
{
MainWindow.mProjectFullName = null; //王佳修改
MainWindow.setupStr = null;
return;
}
}
openProject.Filter = "setup文件(*.setup)|*.setup|所有文件|*.*";
DialogResult dr = openProject.ShowDialog();
if (dr == DialogResult.OK)
{
//在新建一个工程时，又打开这个工程则什么也不做 否则执行下面的操作
if (mProjectFullName != openProject.FileName)
{
setupStr = FileOperation.ReadFile(openProject.FileName);
//.setup文件的包括路径的名字
mProjectFullName = openProject.FileName;
//.setup.info文件的包含路径的名字
nodeInfoFullPath = openProject.FileName + ".info";
transInfoFullPath = openProject.FileName + ".transinfo";
relationOfAntAndWavePath = openProject.FileName + ".match";
waveinfoFilePath = openProject.FileName + ".waveinfo";
//工程的路径 不包括文件
MainWindow.projectRealPath = openProject.FileName.Substring(0, openProject.FileName.LastIndexOf("\\"));
staticTreeView.Nodes.Clear();
//从信息文件中找出工程树中工程的名字将其加载到工程树中
string nodeNamesStr = FileOperation.ReadFile(nodeInfoFullPath);
string projectNameStr = StringFound.FoundBackStr(SetupContent.projectIndeStr, nodeNamesStr, true);
MainWindow.onlyProjectName = projectNameStr;
longitudeStr = StringFound.FoundBackStr(SetupContent.longitudeIndeStr, nodeNamesStr, true);
latitudeStr = StringFound.FoundBackStr(SetupContent.latitudeIndeStr, nodeNamesStr, true);
staticTreeView.Nodes.Add("工程名字");
staticTreeView.Nodes[0].Nodes.Add(projectNameStr);
staticTreeView.Nodes[0].Nodes[0].Nodes.Add("地形");
MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes.Add("波形");
MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes.Add("天线");
MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes.Add("辐射源");
MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes.Add("接收机");
MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes[4].Nodes.Add("点状分布");
MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes[4].Nodes.Add("区域分布");
MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes.Add("仿真结果设定");
ArrayList nodeNamesArr = new ArrayList();
//向工程树中添加波形节点
nodeNamesArr = ProjectTreeMatchString.MatchStr(nodeNamesStr, SetupContent.waveIndeStr, SetupContent.waveIndeStr.Length);
foreach (string s in nodeNamesArr)
{
staticTreeView.Nodes[0].Nodes[0].Nodes[1].Nodes.Add(s);
}
//向工程树中添加地形节点
nodeNamesArr = ProjectTreeMatchString.MatchStr(nodeNamesStr, SetupContent.terrainIndeStr, SetupContent.terrainIndeStr.Length);
foreach (string s in nodeNamesArr)
{
staticTreeView.Nodes[0].Nodes[0].Nodes[0].Nodes.Add(s);
}
//向工程树种添加天线结点
nodeNamesArr = ProjectTreeMatchString.MatchStr(nodeNamesStr, SetupContent.antennaIndeStr, SetupContent.antennaIndeStr.Length);
foreach (string s in nodeNamesArr)
{
staticTreeView.Nodes[0].Nodes[0].Nodes[2].Nodes.Add(s);
}
//向工程树种添加辐射源结点
nodeNamesArr = ProjectTreeMatchString.MatchStr(nodeNamesStr, SetupContent.transmitterIndeStr, SetupContent.transmitterIndeStr.Length);
foreach (string s in nodeNamesArr)
{
staticTreeView.Nodes[0].Nodes[0].Nodes[3].Nodes.Add(s);
}
//向工程树种添加点状接收机
nodeNamesArr = ProjectTreeMatchString.MatchStr(nodeNamesStr, SetupContent.pointReceiverIndeStr, SetupContent.pointReceiverIndeStr.Length);
foreach (string s in nodeNamesArr)
{
staticTreeView.Nodes[0].Nodes[0].Nodes[4].Nodes[0].Nodes.Add(s);
}
//向工程树种添加线状接收机
nodeNamesArr = ProjectTreeMatchString.MatchStr(nodeNamesStr, SetupContent.gridReceiverIndeStr, SetupContent.gridReceiverIndeStr.Length);
foreach (string s in nodeNamesArr)
{
staticTreeView.Nodes[0].Nodes[0].Nodes[4].Nodes[1].Nodes.Add(s);
}
//向工程树中加载结果设定的相应信息
string pathsResultStr = StringFound.FoundBackStr(SetupContent.resultSetIndeStr1, nodeNamesStr, false);
//若结果设定中的复选框被选中
if (GetResultSetStr(pathsResultStr))
{
//将复选框的状态保存到结果设定窗口中
PathsCheck.Checked = true;
//在工程树中加载结果设定结点中加载相应的信息
staticTreeView.Nodes[0].Nodes[0].Nodes[5].Nodes.Add(SetupContent.resultSetOfTreeIndeStr1);
}
string pathlossResultStr = StringFound.FoundBackStr(SetupContent.resultSetIndeStr2, nodeNamesStr, false);
if (GetResultSetStr(pathlossResultStr))
{
PathlossCheck.Checked = true;
staticTreeView.Nodes[0].Nodes[0].Nodes[5].Nodes.Add(SetupContent.resultSetOfTreeIndeStr2);
}
string eFieldResultStr = StringFound.FoundBackStr(SetupContent.resultSetIndeStr3, nodeNamesStr, false);
if (GetResultSetStr(eFieldResultStr))
{
EFieldCheck.Checked = true;
staticTreeView.Nodes[0].Nodes[0].Nodes[5].Nodes.Add(SetupContent.resultSetOfTreeIndeStr3);
}
string eFieldTotalResultStr = StringFound.FoundBackStr(SetupContent.resultSetIndeStr4, nodeNamesStr, false);
if (GetResultSetStr(eFieldTotalResultStr))
{
EFieldTotalCheck.Checked = true;
staticTreeView.Nodes[0].Nodes[0].Nodes[5].Nodes.Add(SetupContent.resultSetOfTreeIndeStr4);
}
string powerResultStr = StringFound.FoundBackStr(SetupContent.resultSetIndeStr5, nodeNamesStr, false);
if (GetResultSetStr(powerResultStr))
{
PowerCheck.Checked = true;
staticTreeView.Nodes[0].Nodes[0].Nodes[5].Nodes.Add(SetupContent.resultSetOfTreeIndeStr5);
}
//判断用户是否关闭WI
Process pro = null;
try
{
pro = Process.GetProcessById(wiProcessID);
}
catch (ArgumentException)
{
//如果ID所对应的WI进程已被关闭，则再重新开启WI
Process wiProcess = Process.Start(exePath, openProject.FileName);
this.WindowState = FormWindowState.Normal;
this.Activate();
MainWindow.wiProcessID = wiProcess.Id;
return;
}
if (pro == null)
{
//如果WI进程还存在，则先将其关闭再打开重新加载工程
pro.Kill();
}
else
{
Process wiProcess = Process.Start(exePath, openProject.FileName);
//Process wiProcess = Process.Start(exePath, openProject.FileName);
this.WindowState = FormWindowState.Normal;
//this.TopMost = true;
this.Activate();
this.WindowState = FormWindowState.Maximized;
MainWindow.wiProcessID = wiProcess.Id;
}
}
else
{
MessageBox.Show("该工程已经打开！", "警告", MessageBoxButtons.OK, MessageBoxIcon.Warning);
}
}
else
{
mProjectFullName = null;
}
}
private void newTerrainWindowOk_button1_Click(object sender, EventArgs e)
{
addTerrain = client.iGetTer((string)newTerrainName_comboBox1.SelectedItem);
LogFileManager.ObjLog.info((string)newTerrainName_comboBox1.SelectedItem);
//确保先创建工程。否则插入数据将会出错
if (MainWindow.mProjectFullName == null)
{
MessageBox.Show("请先创建一个工程之后再从本地添加地形!", "错误", MessageBoxButtons.OK, MessageBoxIcon.Error);
this.Close();
}
else
{
//必须先选择地形，再单击确定
if ((string)newTerrainName_comboBox1.SelectedItem != "")
{
string t = addTerrain.path;
//将经纬度存储到.setup.info文件中
FileOperation.WriteLineFile(SetupContent.longitudeIndeStr + " " + addTerrain.originX, MainWindow.nodeInfoFullPath, true);
FileOperation.WriteLineFile(SetupContent.latitudeIndeStr + " " + addTerrain.originY, MainWindow.nodeInfoFullPath, true);
if (File.Exists(t) == false)
{
MessageBox.Show("数据库中已不存在此地图", "错误", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
//查找begin_<project>后面的字符串temp
string temp = StringFound.FoundBackStr("begin_<project>", MainWindow.setupStr, true);
if (temp == null)
{
MessageBox.Show("程序内部发生错误!", "错误", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
else
{
//查找begin_<project>后面的字符串temp
string nodeNamesStr = FileOperation.ReadFile(MainWindow.nodeInfoFullPath);
//若信息文件中已经添加了地形，再次添加时要从setup文件先删除原来的地形，从从工程树中删除原来的地形
if (nodeNamesStr.LastIndexOf("<terrain>") != -1)
{
DialogResult result = MessageBox.Show("您确定要替换原来添加的地形吗？", "提醒", MessageBoxButtons.OKCancel, MessageBoxIcon.Information);
if (result == DialogResult.OK)
{
if (!TerrainOperation.DeleteTerrain(nodeNamesStr))
{
MessageBox.Show("对不起，程序内部发生错误，删除失败", "错误", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
MessageBox.Show("前一个地图已被替换", "提醒", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
else
{
return;
}
}
//向全局字符串setupStr插入<global>段
int startPosiGlobal = MainWindow.setupStr.IndexOf("begin_<project>") + 15 + temp.Length + 3;
string globalStr = SetupContent.terrainGlobalFixedStr1 + newTerrainLongtitude_textBox2.Text + "\r\n"
+ SetupContent.terrainGlobalFixedStr2 + newTerrainLatitude_textBox3.Text + "\r\n"
+ SetupContent.terrainGlobalFixedStr3 + "\r\n";
MainWindow.setupStr = MainWindow.setupStr.Insert(startPosiGlobal, globalStr);
////向全局字符串插入<studyarea>段 其中zmin zmax及地图顶点先设为默认值
int startPosiStudyArea = MainWindow.setupStr.IndexOf("FirstAvailableStudyAreaNumber") + 33;
string studyAreaStr = SetupContent.terrainStudyAreaStr1 + "\r\n"
+ SetupContent.terrainStudyAreaStr2 + newTerrainLongtitude_textBox2.Text + "\r\n"
+ SetupContent.terrainGlobalFixedStr2 + newTerrainLatitude_textBox3.Text + "\r\n"
+ SetupContent.terrainStudyAreaStr3 + addTerrain.Zmin.ToString() + "\r\n"
+ SetupContent.terrainStudyAreaStr4 + addTerrain.Zmax.ToString() + "\r\n"
+ SetupContent.terrainStudyAreaStr5 + "\r\n"
+ addTerrain.Vertex1X + " " + addTerrain.Vertex1Y + " " + addTerrain.Vertex1Z + "\r\n"
+ addTerrain.Vertex2X + " " + addTerrain.Vertex2Y + " " + addTerrain.Vertex2Z + "\r\n"
+ addTerrain.Vertex3X + " " + addTerrain.Vertex3Y + " " + addTerrain.Vertex3Z + "\r\n"
+ addTerrain.Vertex4X + " " + addTerrain.Vertex4Y + " " + addTerrain.Vertex4Z + "\r\n"
+ SetupContent.terrainStudyAreaStr6 + "\r\n";
MainWindow.setupStr = MainWindow.setupStr.Insert(startPosiStudyArea, studyAreaStr);
//向全局字符串插入<feature>段
int startPosiFeature = MainWindow.setupStr.IndexOf("end_<studyarea>") + 17;
string featureStr = SetupContent.terrainFeatureFixedStr1 + "\r\n"
+ SetupContent.terrainFeatureFixedStr2 + "0" + "\r\n"
+ SetupContent.terrainFeatureFixedStr3 + "\r\n"
+ SetupContent.terrainFeatureFixedStr4
+ MainWindow.projectRealPath + "\\" + (string)newTerrainName_comboBox1.SelectedItem + "\r\n"
+ SetupContent.terrainFeatureFixedStr5 + "\r\n";
MainWindow.setupStr = MainWindow.setupStr.Insert(startPosiFeature, featureStr);
string terFileName = t.Substring(t.LastIndexOf('\\') + 1, t.Length - 1 - t.LastIndexOf('\\'));
//将ter文件拷贝到工程目录下
FileCopyUI.FileCopy(addTerrain.path, MainWindow.projectRealPath + "\\" + terFileName);
FileCopyUI.FileCopy(addTerrain.path + ".terinfo", MainWindow.projectRealPath + "\\" + terFileName + ".terinfo");
string terainStr = FileOperation.ReadFile(MainWindow.nodeInfoFullPath);
if (terainStr.IndexOf(SetupContent.terrainIndeStr) != -1)
{
terainStr = terainStr.Remove(terainStr.IndexOf(SetupContent.terrainIndeStr), SetupContent.terrainIndeStr.Length + 2);
FileOperation.WriteFile(terainStr, MainWindow.nodeInfoFullPath, false);
}
//将工程树的节点信息写到.info文件中
FileOperation.WriteLineFile(SetupContent.terrainIndeStr + " " + terFileName, MainWindow.nodeInfoFullPath, true);
FileOperation.WriteFile(MainWindow.setupStr, MainWindow.mProjectFullName, false);
MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes[0].Nodes.Add(terFileName);
}
}
}
this.Close();
}
/*第一个string数组总共有8个元素
* 每个元素都包含两部分，一是标识字符串，另一是内容和"\r\n"*/
public string InsertAntenna8(string[] contents, string waveNameOfAntenna, string constStr1, string constStr2)
{
int insertSite = 0;
bool firstAntenna = false;
string antennaCount = null;
//插入的是第一个天线
if (sourceString.LastIndexOf(constStr1) == -1)
{
insertSite = sourceString.LastIndexOf(constStr2) + constStr2.Length + 2;
firstAntenna = true;
//当是第一次添加天线时，在traninfo文件中写入antenna 0
antennaCount = "0";
}
//插入的不是第一个天线
else
{
//插入的起始位置
insertSite = sourceString.LastIndexOf(constStr1) + constStr1.Length + 2;
//插入的不是第一个天线，算出天线的编号
int antennaSite = sourceString.LastIndexOf("\nantenna") + 9;//10是\nantenna的长度
while (sourceString[antennaSite] != '\r')
{
antennaCount = antennaCount + sourceString[antennaSite++];
}
int b = int.Parse(antennaCount) + 1;
antennaCount = string.Format("{0:##}", b);
}
//用户没有在combox中选择波形名称，则插入默认的正弦波
//if (waveNameOfAntenna==null)
//{
// string[] sinStr = { "Sinusoid", "Sinusoid", "1000000000", "1000000", "0" };
// sourceString = InsertWaveform5(sinStr, SetupContent.waveFormStr2, SetupContent.waveFormStr3,true);
//}
//else
//{
string[] waveNames = new string[30];
waveNames = waveformNames(SetupContent.waveFormStr1);
//插入setup文件中的波形
sourceString = sourceString.Insert(insertSite, contents[0]);
insertSite = insertSite + contents[0].Length;
//是第一次添加天线，天线的编号
if (firstAntenna)
{
sourceString = sourceString.Insert(insertSite, "antenna " + "0" + "\r\n");
insertSite = insertSite + 11;
}
//不是第一次添加天线，天线的编号
else
{
sourceString = sourceString.Insert(insertSite, "antenna " + antennaCount + "\r\n");
insertSite = insertSite + 10 + antennaCount.Length;
}
sourceString = sourceString.Insert(insertSite, contents[1]);
insertSite = insertSite + contents[1].Length;
//找到最大的waveform编号
//根据选中的波形名称去获得对应的波形编号
string waveStr = null;
int waveNameSite = sourceString.IndexOf(SetupContent.waveFormStr1 + " " + waveNameOfAntenna);
if (waveNameSite != -1)
{
//由begin_<Waveform>去获取waveform这一行字符串。第二次循环才获得waveform这一行字符串
for (int j = 0; j < 2; j++)
{
waveStr = null;
while (sourceString[waveNameSite + (SetupContent.waveFormStr1 + " " + waveNameOfAntenna).Length + 2] != '\r')
{
waveStr = waveStr + sourceString[waveNameSite + (SetupContent.waveFormStr1 + " " + waveNameOfAntenna).Length + 2];
waveNameSite++;
}
//跳过\r\n这两个字符
waveNameSite = waveNameSite + 2;
}
}
string antennaName = StringFound.FoundBackStr(SetupContent.antennaStr1, contents[0], true);
//将发射机需要的信息存放到.transinfo文件中
FileOperation.WriteFile(contents[0] + "antenna " + antennaCount + "\r\n" + waveStr + "\r\n" + SetupContent.antennaStr3 + " " + antennaName + "\r\n", MainWindow.transInfoFullPath, true);
//将新建的天线和其对应的波形保存在.match文件中
string antennaNameTemp = StringFound.FoundBackStr(SetupContent.antennaIndeStr, contents[0], true);
//FileOperation.WriteLineFile(SetupContent.antennaIndeStr +" "+ antennaNameTemp + "#" + waveStr + "#" + waveNameOfAntenna, MainWindow.relationOfAntAndWavePath,true);
FileOperation.WriteLineFile(SetupContent.antennaIndeStr + " " + antennaNameTemp + "#" + waveNameOfAntenna, MainWindow.relationOfAntAndWavePath, true);
sourceString = sourceString.Insert(insertSite, waveStr + "\r\n");
insertSite = insertSite + waveStr.Length + 2;
//contents[2]到contents[7]都是按相同的规律插入
for (int j = 2; j < 8; j++)
{
sourceString = sourceString.Insert(insertSite, contents[j]);
insertSite = insertSite + contents[j].Length;
}
//}
return(sourceString);
}
private void newTerrainOk__Click(object sender, EventArgs e)
{
//确保先创建工程。否则插入数据将会出错
if (MainWindow.mProjectFullName == null)
{
//MessageBox.Show("请先创建一个工程之后再从本地添加地形!", "错误", MessageBoxButtons.OK, MessageBoxIcon.Error);
this.Close();
return;
}
else
{
//必须先浏览地形，再单击确定
if (openTerrainDialog.FileName != "")
{
//查找begin_<project>后面的字符串temp
string temp = StringFound.FoundBackStr("begin_<project>", MainWindow.setupStr, true);
if (temp == null)
{
MessageBox.Show("文件被破坏，产生错误错误!", "错误", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
else
{
//从信息文件中读取信息
string nodeNamesStr = FileOperation.ReadFile(MainWindow.nodeInfoFullPath);
//若信息文件中已经添加了地形，再次添加时要从setup文件先删除原来的地形，从从工程树中删除原来的地形
if (nodeNamesStr.LastIndexOf("<terrain>") != -1)
{
DialogResult result = MessageBox.Show("您确定要替换原来添加的地形吗？", "提醒", MessageBoxButtons.OKCancel, MessageBoxIcon.Information);
if (result == DialogResult.OK)
{
if (!TerrainOperation.DeleteTerrain(nodeNamesStr))
{
MessageBox.Show("对不起，发生错误，删除失败", "错误", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
MessageBox.Show("前一个地图已被替换", "提醒", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
else
{
return;
}
}
//向全局字符串setupStr插入<global>段
int startPosiGlobal = MainWindow.setupStr.IndexOf("begin_<project>") + 15 + temp.Length + 3;
string globalStr = SetupContent.terrainGlobalFixedStr1 + longtitude_textBox1.Text + "\r\n"
+ SetupContent.terrainGlobalFixedStr2 + latitude_textBox3.Text + "\r\n"
+ SetupContent.terrainGlobalFixedStr3 + "\r\n";
MainWindow.setupStr = MainWindow.setupStr.Insert(startPosiGlobal, globalStr);
//向全局字符串插入<studyarea>段
int startPosiStudyArea = MainWindow.setupStr.IndexOf("FirstAvailableStudyAreaNumber") + 33;
string studyAreaStr = SetupContent.terrainStudyAreaStr1 + "\r\n"
+ SetupContent.terrainStudyAreaStr2 + longtitude_textBox1.Text + "\r\n"
+ SetupContent.terrainGlobalFixedStr2 + latitude_textBox3.Text + "\r\n"
+ SetupContent.terrainStudyAreaStr3 + terrainValueStr[2] + "\r\n"
+ SetupContent.terrainStudyAreaStr4 + terrainValueStr[3] + "\r\n"
+ SetupContent.terrainStudyAreaStr5 + "\r\n" + terrainValueStr[4] + "\r\n"
+ terrainValueStr[5] + "\r\n" + terrainValueStr[6] + "\r\n" + terrainValueStr[7] + "\r\n"
+ SetupContent.terrainStudyAreaStr6 + "\r\n";
MainWindow.setupStr = MainWindow.setupStr.Insert(startPosiStudyArea, studyAreaStr);
//向全局字符串插入<feature>段
int startPosiFeature = MainWindow.setupStr.IndexOf("end_<studyarea>") + 17;
string featureStr = SetupContent.terrainFeatureFixedStr1 + "\r\n"
+ SetupContent.terrainFeatureFixedStr2 + "0" + "\r\n"
+ SetupContent.terrainFeatureFixedStr3 + "\r\n"
+ SetupContent.terrainFeatureFixedStr4
+ MainWindow.projectRealPath + "\\" + terrainname_textBox4.Text + "\r\n"
+ SetupContent.terrainFeatureFixedStr5 + "\r\n";
MainWindow.setupStr = MainWindow.setupStr.Insert(startPosiFeature, featureStr);
string t = openTerrainDialog.FileName;
string terFileName = t.Substring(t.LastIndexOf('\\') + 1, t.Length - 1 - t.LastIndexOf('\\'));
//将ter文件拷贝到工程目录下
FileCopyUI.FileCopy(openTerrainDialog.FileName, MainWindow.projectRealPath + "\\" + terFileName);
FileCopyUI.FileCopy(openTerrainDialog.FileName + ".terinfo", MainWindow.projectRealPath + "\\" + terFileName + ".terinfo");
//将工程树的节点信息写到.info文件中
FileOperation.WriteLineFile(SetupContent.terrainIndeStr + " " + terFileName, MainWindow.nodeInfoFullPath, true);
FileOperation.WriteFile(MainWindow.setupStr, MainWindow.mProjectFullName, false);
MainWindow.staticTreeView.Nodes[0].Nodes[0].Nodes[0].Nodes.Add(terFileName);
}
this.Close();
}
else
{
MessageBox.Show("请您从本地添加地形!", "错误", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
}
}