/// <summary>
/// Loads the config for the Welding or prepares default values and generates a new config
/// </summary>
private void initConfig()
{
D.PluginConfiguration oldConfig = D.PluginConfiguration.CreateFor(Constants.settingXmlOldConfigFileName);
bool oldConfigFound = oldConfig.exists();
if (oldConfigFound)
{
oldConfig = D.PluginConfiguration.CreateFor();
oldConfig.load();
oldConfig.delete();
Log.dbg("old configfile found and deleted");
}
_config = FileManager.loadConfig();
_config.dataBaseAutoReload = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingDbAutoReload) : _config.dataBaseAutoReload;
_config.allowCareerMode = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingAllowCareer) : _config.allowCareerMode;
Welder.includeAllNodes = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingAllNodes) : _config.includeAllNodes;
Welder.dontProcessMasslessParts = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingDontProcessMasslessParts) : _config.dontProcessMasslessParts;
Welder.StrengthCalcMethod = oldConfigFound ? StrengthParamsCalcMethod.ArithmeticMean : _config.StrengthCalcMethod;
Welder.MaxTempCalcMethod = oldConfigFound ? MaxTempCalcMethod.ArithmeticMean : _config.MaxTempCalcMethod;
Welder.runInTestMode = oldConfigFound ? false : _config.runInTestMode;
Welder.precisionDigits = oldConfigFound ? 6 : _config.precisionDigits;
Welder.fileSimplification = oldConfigFound ? false : _config.fileSimplification;
}
/// <summary>
/// saves the config file and the modulelist file so that it is possible to change them without the need to recompile
/// </summary>
/// <param name="configToSave"></param>
public static void saveConfig(WeldingConfiguration configToSave)
{
try {
saveConfig(configToSave, Constants.settingXmlConfigFileName, Constants.settingXmlListFileName);
} catch (Exception e) {
Log.warn(e.Message);
saveConfig(configToSave, Constants.settingXmlConfigFileName, Constants.settingXmlListFileName);
}
}
/// <summary>
/// loads configfile and prepares it with all needed lists
/// </summary>
/// <returns></returns>
public static WeldingConfiguration loadConfig()
{
WeldingConfiguration configuration = new WeldingConfiguration();
ModuleLists moduleList = new ModuleLists();
FileStream FileStream;
if (System.IO.File.Exists(_configFile))
{
XmlSerializer configSerializer = new XmlSerializer(typeof(WeldingConfiguration));
configSerializer.UnknownNode += new XmlNodeEventHandler(serializer_UnknownNode);
configSerializer.UnknownAttribute += new XmlAttributeEventHandler(serializer_UnknownAttribute);
FileStream = new FileStream(_configFile, FileMode.Open);
configuration = (WeldingConfiguration)configSerializer.Deserialize(FileStream);
FileStream.Close();
if (configuration.MainWindowXPosition > (Screen.width - Constants.guiScreenEdgeClearance))
{
configuration.MainWindowXPosition = Screen.width - Constants.guiScreenEdgeClearance;
}
if (configuration.MainWindowYPosition > (Screen.height - Constants.guiScreenEdgeClearance))
{
configuration.MainWindowYPosition = Screen.height - Constants.guiScreenEdgeClearance;
}
FileStream.Close();
}
if (System.IO.File.Exists(_moduleListFile))
{
XmlSerializer moduleListSerializer = new XmlSerializer(typeof(ModuleLists));
moduleListSerializer.UnknownNode += new XmlNodeEventHandler(serializer_UnknownNode);
moduleListSerializer.UnknownAttribute += new XmlAttributeEventHandler(serializer_UnknownAttribute);
FileStream = new FileStream(_moduleListFile, FileMode.Open);
moduleList = (ModuleLists)moduleListSerializer.Deserialize(FileStream);
FileStream.Close();
configuration.vector2CurveModules = WeldingHelpers.convertFromToStringArray(moduleList.vector2CurveModules);
configuration.vector4CurveModules = WeldingHelpers.convertFromToStringArray(moduleList.vector4CurveModules);
configuration.subModules = WeldingHelpers.convertFromToStringArray(moduleList.subModules);
configuration.modulesToIgnore = WeldingHelpers.convertFromToStringArray(moduleList.modulesToIgnore);
configuration.averagedModuleAttributes = WeldingHelpers.convertFromToStringArray(moduleList.averagedModuleAttributes);
configuration.unchangedModuleAttributes = WeldingHelpers.convertFromToStringArray(moduleList.unchangedModuleAttributes);
configuration.breakingModuleAttributes = WeldingHelpers.convertFromToStringArray(moduleList.breakingModuleAttributes);
FileStream.Close();
}
else
{
configuration.vector2CurveModules = Constants.basicVector2CurveModules;
configuration.vector4CurveModules = Constants.basicVector4CurveModules;
configuration.subModules = Constants.basicSubModules;
configuration.modulesToIgnore = Constants.basicModulesToIgnore;
configuration.averagedModuleAttributes = Constants.basicAveragedModuleAttributes;
configuration.unchangedModuleAttributes = Constants.basicUnchangedModuleAttributes;
configuration.breakingModuleAttributes = Constants.basicBreakingModuleAttributes;
}
Debug.Log(string.Format("{0} Config was loaded", Constants.logPrefix));
return(configuration);
}
/// <summary>
/// saves the config file and the modulelist file so that it is possible to change them without the need to recompile
/// </summary>
/// <param name="configToSave"></param>
public static void saveConfig(WeldingConfiguration configToSave)
{
try {
saveConfig(configToSave, CONFIG_FULLPATHNAME, MODULELIST_FULLPATHNAME);
} catch (Exception e) {
Log.warn(e.Message);
checkPathnameAvailability(CONFIG_FULLPATHNAME);
checkPathnameAvailability(MODULELIST_FULLPATHNAME);
saveConfig(configToSave, CONFIG_FULLPATHNAME, MODULELIST_FULLPATHNAME);
}
}
private static void saveConfig(WeldingConfiguration configToSave, String configFullPathName, String moduleFullPathName)
{
WeldingConfiguration configuration = (WeldingConfiguration)configToSave.clone();
ModuleLists moduleList = new ModuleLists();
TextWriter fileStreamWriter;
if (configuration == null)
{
configuration = new WeldingConfiguration();
}
configuration.vector2CurveModules = null;
configuration.vector4CurveModules = null;
configuration.subModules = null;
configuration.modulesToIgnore = null;
configuration.modulesToMultiply = null;
configuration.maximizedModuleAttributes = null;
configuration.minimizedModuleAttributes = null;
configuration.averagedModuleAttributes = null;
configuration.unchangedModuleAttributes = null;
configuration.breakingModuleAttributes = null;
XmlSerializer configSerializer = new XmlSerializer(typeof(WeldingConfiguration));
fileStreamWriter = new StreamWriter(configFullPathName);
configSerializer.Serialize(fileStreamWriter, configuration);
fileStreamWriter.Close();
//ModuleList from the constants or the actual config, depending on length of the array, in case user did add some entries
moduleList.vector2CurveModules = WeldingHelpers.convertStringFromToArray(configToSave.vector2CurveModules != null && (configToSave.vector2CurveModules.Length > Constants.basicVector2CurveModules.Length) ? configToSave.vector2CurveModules : Constants.basicVector2CurveModules);
moduleList.vector4CurveModules = WeldingHelpers.convertStringFromToArray(configToSave.vector4CurveModules != null && (configToSave.vector4CurveModules.Length > Constants.basicVector4CurveModules.Length) ? configToSave.vector4CurveModules : Constants.basicVector4CurveModules);
moduleList.subModules = WeldingHelpers.convertStringFromToArray(configToSave.subModules != null && (configToSave.subModules.Length > Constants.basicSubModules.Length) ? configToSave.subModules : Constants.basicSubModules);
moduleList.modulesToIgnore = WeldingHelpers.convertStringFromToArray(configToSave.modulesToIgnore != null && (configToSave.modulesToIgnore.Length > Constants.basicModulesToIgnore.Length) ? configToSave.modulesToIgnore : Constants.basicModulesToIgnore);
moduleList.modulesToMultiply = WeldingHelpers.convertStringFromToArray(configToSave.modulesToMultiply != null && (configToSave.modulesToMultiply.Length > Constants.basicModulesToMultiply.Length) ? configToSave.modulesToMultiply : Constants.basicModulesToMultiply);
moduleList.maximizedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.maximizedModuleAttributes != null && (configToSave.maximizedModuleAttributes.Length > Constants.basicMaximizedModuleAttributes.Length) ? configToSave.maximizedModuleAttributes : Constants.basicMaximizedModuleAttributes);
moduleList.minimizedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.minimizedModuleAttributes != null && (configToSave.minimizedModuleAttributes.Length > Constants.basicMinimizedModuleAttributes.Length) ? configToSave.minimizedModuleAttributes : Constants.basicMinimizedModuleAttributes);
moduleList.averagedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.averagedModuleAttributes != null && (configToSave.averagedModuleAttributes.Length > Constants.basicAveragedModuleAttributes.Length) ? configToSave.averagedModuleAttributes : Constants.basicAveragedModuleAttributes);
moduleList.unchangedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.unchangedModuleAttributes != null && (configToSave.unchangedModuleAttributes.Length > Constants.basicUnchangedModuleAttributes.Length) ? configToSave.unchangedModuleAttributes : Constants.basicUnchangedModuleAttributes);
moduleList.breakingModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.breakingModuleAttributes != null && (configToSave.breakingModuleAttributes.Length > Constants.basicBreakingModuleAttributes.Length) ? configToSave.breakingModuleAttributes : Constants.basicBreakingModuleAttributes);
XmlSerializer moduleListSerializer = new XmlSerializer(typeof(ModuleLists));
fileStreamWriter = new StreamWriter(moduleFullPathName);
moduleListSerializer.Serialize(fileStreamWriter, moduleList);
fileStreamWriter.WriteLine("");
foreach (string s in comments)
{
fileStreamWriter.WriteLine(s);
}
fileStreamWriter.Close();
Log.dbg("Config was saved");
}
/// <summary>
/// saves the config file and the modulelist file so that it is possible to change them without the need to recompile
/// </summary>
/// <param name="configToSave"></param>
public static void saveConfig(WeldingConfiguration configToSave)
{
WeldingConfiguration configuration = (WeldingConfiguration)configToSave.clone();
ModuleLists moduleList = new ModuleLists();
TextWriter fileStreamWriter;
if (configuration == null)
{
configuration = new WeldingConfiguration();
}
configuration.vector2CurveModules = null;
configuration.vector4CurveModules = null;
configuration.subModules = null;
configuration.modulesToIgnore = null;
configuration.averagedModuleAttributes = null;
configuration.unchangedModuleAttributes = null;
configuration.breakingModuleAttributes = null;
XmlSerializer configSerializer = new XmlSerializer(typeof(WeldingConfiguration));
fileStreamWriter = new StreamWriter(_configFile);
configSerializer.Serialize(fileStreamWriter, configuration);
fileStreamWriter.Close();
//ModuleList from the constants or the actual config, depending on length of the array, in case user did add some entries
moduleList.vector2CurveModules = WeldingHelpers.convertStringFromToArray(configToSave.vector2CurveModules.Length > Constants.basicVector2CurveModules.Length ? configToSave.vector2CurveModules : Constants.basicVector2CurveModules);
moduleList.vector4CurveModules = WeldingHelpers.convertStringFromToArray(configToSave.vector4CurveModules.Length > Constants.basicVector4CurveModules.Length ? configToSave.vector4CurveModules: Constants.basicVector4CurveModules);
moduleList.subModules = WeldingHelpers.convertStringFromToArray(configToSave.subModules.Length > Constants.basicSubModules.Length ?configToSave.subModules: Constants.basicSubModules);
moduleList.modulesToIgnore = WeldingHelpers.convertStringFromToArray(configToSave.modulesToIgnore.Length > Constants.basicModulesToIgnore.Length ? configToSave.modulesToIgnore : Constants.basicModulesToIgnore);
moduleList.averagedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.averagedModuleAttributes.Length > Constants.basicAveragedModuleAttributes.Length ? configToSave.averagedModuleAttributes:Constants.basicAveragedModuleAttributes);
moduleList.unchangedModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.unchangedModuleAttributes.Length > Constants.basicUnchangedModuleAttributes.Length ? configToSave.unchangedModuleAttributes: Constants.basicUnchangedModuleAttributes);
moduleList.breakingModuleAttributes = WeldingHelpers.convertStringFromToArray(configToSave.breakingModuleAttributes.Length > Constants.basicBreakingModuleAttributes.Length ? configToSave.breakingModuleAttributes : Constants.basicBreakingModuleAttributes);
XmlSerializer moduleListSerializer = new XmlSerializer(typeof(ModuleLists));
fileStreamWriter = new StreamWriter(_moduleListFile);
moduleListSerializer.Serialize(fileStreamWriter, moduleList);
fileStreamWriter.WriteLine("");
foreach (string s in comments)
{
fileStreamWriter.WriteLine(s);
}
fileStreamWriter.Close();
Debug.Log(string.Format("{0} Config was saved", Constants.logPrefix));
}
/// <summary>
/// Loads the config for the Welding or prepares default values and generates a new config
/// </summary>
private void initConfig()
{
string xmlOldConfigFile = FileManager.FULLPATHNAME(Constants.settingXmlFilePath, Constants.settingXmlOldConfigFileName);
KSP.IO.PluginConfiguration oldConfig = KSP.IO.PluginConfiguration.CreateForType <OldWeldingPluginConfig>();
bool oldConfigFound = File.Exists(xmlOldConfigFile);
if (oldConfigFound)
{
oldConfig = KSP.IO.PluginConfiguration.CreateForType <OldWeldingPluginConfig>();
oldConfig.load();
File.Delete(xmlOldConfigFile);
Log.dbg("old configfile found and deleted");
}
if (!File.Exists(FileManager.CONFIG_FULLPATHNAME))
{
_config = new WeldingConfiguration();
FileManager.saveConfig(_config);
_config.vector2CurveModules = Constants.basicVector2CurveModules;
_config.vector4CurveModules = Constants.basicVector4CurveModules;
_config.subModules = Constants.basicSubModules;
_config.modulesToIgnore = Constants.basicModulesToIgnore;
_config.averagedModuleAttributes = Constants.basicAveragedModuleAttributes;
_config.unchangedModuleAttributes = Constants.basicUnchangedModuleAttributes;
_config.breakingModuleAttributes = Constants.basicBreakingModuleAttributes;
}
else
{
_config = FileManager.loadConfig();
}
_config.dataBaseAutoReload = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingDbAutoReload) : _config.dataBaseAutoReload;
_config.allowCareerMode = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingAllowCareer) : _config.allowCareerMode;
Welder.includeAllNodes = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingAllNodes) : _config.includeAllNodes;
Welder.dontProcessMasslessParts = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingDontProcessMasslessParts) : _config.dontProcessMasslessParts;
Welder.StrengthCalcMethod = oldConfigFound ? StrengthParamsCalcMethod.ArithmeticMean : _config.StrengthCalcMethod;
Welder.MaxTempCalcMethod = oldConfigFound ? MaxTempCalcMethod.ArithmeticMean : _config.MaxTempCalcMethod;
Welder.runInTestMode = oldConfigFound ? false : _config.runInTestMode;
Welder.precisionDigits = oldConfigFound ? 6 : _config.precisionDigits;
Welder.fileSimplification = oldConfigFound ? false : _config.fileSimplification;
}
/// <summary>
/// Loads the config for the Welding or prepares default values and generates a new config
/// </summary>
private void initConfig()
{
KSP.IO.PluginConfiguration oldConfig = KSP.IO.PluginConfiguration.CreateForType <OldWeldingPluginConfig>();
bool oldConfigFound = System.IO.File.Exists(string.Concat(Constants.settingRuntimeDirectory, Constants.settingXmlFilePath, Constants.settingXmlOldConfigFileName));
if (oldConfigFound)
{
oldConfig = KSP.IO.PluginConfiguration.CreateForType <OldWeldingPluginConfig>();
oldConfig.load();
System.IO.File.Delete(string.Concat(Constants.settingRuntimeDirectory, Constants.settingXmlFilePath, Constants.settingXmlOldConfigFileName));
Debug.Log(string.Format("{0}old configfile found and deleted", Constants.logPrefix));
}
if (!System.IO.File.Exists(string.Concat(Constants.settingRuntimeDirectory, Constants.settingXmlFilePath, Constants.settingXmlConfigFileName)))
{
_config = new WeldingConfiguration();
FileManager.saveConfig(_config);
_config.vector2CurveModules = Constants.basicVector2CurveModules;
_config.vector4CurveModules = Constants.basicVector4CurveModules;
_config.subModules = Constants.basicSubModules;
_config.modulesToIgnore = Constants.basicModulesToIgnore;
_config.averagedModuleAttributes = Constants.basicAveragedModuleAttributes;
_config.unchangedModuleAttributes = Constants.basicUnchangedModuleAttributes;
_config.breakingModuleAttributes = Constants.basicBreakingModuleAttributes;
}
else
{
_config = FileManager.loadConfig();
}
_config.dataBaseAutoReload = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingDbAutoReload) : _config.dataBaseAutoReload;
_config.allowCareerMode = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingAllowCareer) : _config.allowCareerMode;
Welder.includeAllNodes = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingAllNodes) : _config.includeAllNodes;
Welder.dontProcessMasslessParts = oldConfigFound ? oldConfig.GetValue <bool>(Constants.settingDontProcessMasslessParts) : _config.dontProcessMasslessParts;
Welder.StrengthCalcMethod = oldConfigFound ? StrengthParamsCalcMethod.ArithmeticMean : _config.StrengthCalcMethod;
Welder.MaxTempCalcMethod = oldConfigFound ? MaxTempCalcMethod.ArithmeticMean : _config.MaxTempCalcMethod;
Welder.runInTestMode = oldConfigFound ? false : _config.runInTestMode;
Welder.precisionDigits = oldConfigFound ? 6 : _config.precisionDigits;
}
/// <summary>
/// loads configfile and prepares it with all needed lists
/// </summary>
/// <returns></returns>
public static WeldingConfiguration loadConfig()
{
WeldingConfiguration configuration = new WeldingConfiguration();
ModuleLists moduleList = new ModuleLists();
FileStream FileStream = null;
try {
XmlSerializer configSerializer = new XmlSerializer(typeof(WeldingConfiguration));
configSerializer.UnknownNode += new XmlNodeEventHandler(serializer_UnknownNode);
configSerializer.UnknownAttribute += new XmlAttributeEventHandler(serializer_UnknownAttribute);
FileStream = new FileStream(CONFIG_FULLPATHNAME, FileMode.Open);
configuration = (WeldingConfiguration)configSerializer.Deserialize(FileStream);
if (configuration.MainWindowXPosition > (Screen.width - Constants.guiScreenEdgeClearance))
{
configuration.MainWindowXPosition = Screen.width - Constants.guiScreenEdgeClearance;
}
if (configuration.MainWindowYPosition > (Screen.height - Constants.guiScreenEdgeClearance))
{
configuration.MainWindowYPosition = Screen.height - Constants.guiScreenEdgeClearance;
}
} catch (Exception e) {
configuration = new WeldingConfiguration();
Log.warn(String.Format("{0} : {1}", CONFIG_FULLPATHNAME, e.Message));
} finally {
if (null != FileStream)
{
FileStream.Close();
}
FileStream = null;
}
try {
XmlSerializer moduleListSerializer = new XmlSerializer(typeof(ModuleLists));
moduleListSerializer.UnknownNode += new XmlNodeEventHandler(serializer_UnknownNode);
moduleListSerializer.UnknownAttribute += new XmlAttributeEventHandler(serializer_UnknownAttribute);
FileStream = new FileStream(MODULELIST_FULLPATHNAME, FileMode.Open);
moduleList = (ModuleLists)moduleListSerializer.Deserialize(FileStream);
configuration.vector2CurveModules = moduleList.vector2CurveModules != null?WeldingHelpers.convertFromToStringArray(moduleList.vector2CurveModules) : new string[0];
configuration.vector4CurveModules = moduleList.vector4CurveModules != null?WeldingHelpers.convertFromToStringArray(moduleList.vector4CurveModules) : new string[0];
configuration.subModules = moduleList.subModules != null?WeldingHelpers.convertFromToStringArray(moduleList.subModules) : new string[0];
configuration.modulesToIgnore = moduleList.modulesToIgnore != null?WeldingHelpers.convertFromToStringArray(moduleList.modulesToIgnore) : new string[0];
configuration.modulesToMultiply = moduleList.modulesToMultiply != null?WeldingHelpers.convertFromToStringArray(moduleList.modulesToMultiply) : new string[0];
configuration.maximizedModuleAttributes = moduleList.maximizedModuleAttributes != null?WeldingHelpers.convertFromToStringArray(moduleList.maximizedModuleAttributes) : new string[0];
configuration.minimizedModuleAttributes = moduleList.minimizedModuleAttributes != null?WeldingHelpers.convertFromToStringArray(moduleList.minimizedModuleAttributes) : new string[0];
configuration.averagedModuleAttributes = moduleList.averagedModuleAttributes != null?WeldingHelpers.convertFromToStringArray(moduleList.averagedModuleAttributes) : new string[0];
configuration.unchangedModuleAttributes = moduleList.unchangedModuleAttributes != null?WeldingHelpers.convertFromToStringArray(moduleList.unchangedModuleAttributes) : new string[0];
configuration.breakingModuleAttributes = moduleList.breakingModuleAttributes != null?WeldingHelpers.convertFromToStringArray(moduleList.breakingModuleAttributes) : new string[0];
} catch (Exception e) {
configuration.vector2CurveModules = Constants.basicVector2CurveModules;
configuration.vector4CurveModules = Constants.basicVector4CurveModules;
configuration.subModules = Constants.basicSubModules;
configuration.modulesToIgnore = Constants.basicModulesToIgnore;
configuration.modulesToMultiply = Constants.basicModulesToMultiply;
configuration.maximizedModuleAttributes = Constants.basicMaximizedModuleAttributes;
configuration.minimizedModuleAttributes = Constants.basicMinimizedModuleAttributes;
configuration.averagedModuleAttributes = Constants.basicAveragedModuleAttributes;
configuration.unchangedModuleAttributes = Constants.basicUnchangedModuleAttributes;
configuration.breakingModuleAttributes = Constants.basicBreakingModuleAttributes;
Log.warn(String.Format("{0} : {1}", CONFIG_FULLPATHNAME, e.Message));
} finally {
if (null != FileStream)
{
FileStream.Close();
}
FileStream = null;
}
Log.dbg("Config was loaded");
return(configuration);
}
/*
* Main window
*/
private void HandleMainWindow(int windowID)
{
GUIStyle _settingsToggleGroupStyle = new GUIStyle(GUI.skin.toggle);
_settingsToggleGroupStyle.margin.left += 40;
//save Window Position
_config.MainWindowXPosition = (int)_editorMainWindow.xMin;
_config.MainWindowYPosition = (int)_editorMainWindow.yMin;
GUILayout.BeginVertical();
GUILayout.EndVertical();
GUILayout.BeginVertical();
if (GUILayout.Button(Constants.guiSettingsGUIContent, GUILayout.MaxWidth(160)))
{
_mainWindowsSettingsMode = !_mainWindowsSettingsMode;
}
//Settings
if (_mainWindowsSettingsMode)
{
_editorMainWindow.height = Constants.guiMainWindowHSettingsExpanded;
_settingsScrollPosition = GUILayout.BeginScrollView(_settingsScrollPosition);
_config.includeAllNodes = GUILayout.Toggle(_config.includeAllNodes, Constants.guiAllNodesGUIContent);
Welder.includeAllNodes = _config.includeAllNodes;
_config.dontProcessMasslessParts = GUILayout.Toggle(_config.dontProcessMasslessParts, Constants.guiDontProcessMasslessPartsGUIContent);
Welder.dontProcessMasslessParts = _config.dontProcessMasslessParts;
_config.dataBaseAutoReload = GUILayout.Toggle(_config.dataBaseAutoReload, Constants.guiDbAutoReloadGUIContent);
_config.useNamedCfgFile = GUILayout.Toggle(_config.useNamedCfgFile, Constants.guiUseNamedCfgFileGUIContent);
_config.advancedDebug = GUILayout.Toggle(_config.advancedDebug, Constants.guiAdvancedDebugGUIContent);
_config.clearEditor = GUILayout.Toggle(_config.clearEditor, Constants.guiClearEditorGUIContent);
_config.fileSimplification = GUILayout.Toggle(_config.fileSimplification, Constants.guiFileSimplificationGUIContent);
Welder.fileSimplification = _config.fileSimplification;
GUILayout.Space(10.0f);
GUILayout.Label(" Vector Precision: " + _config.precisionDigits);
_config.precisionDigits = (int)GUILayout.HorizontalSlider(_config.precisionDigits, 1, 6);
Welder.precisionDigits = _config.precisionDigits;
GUILayout.Space(10.0f);
GUILayout.Label("Strength params calculation method");
// _config.StrengthCalcMethod = (StrengthParamsCalcMethod)GUILayout.SelectionGrid((int)_config.StrengthCalcMethod, Constants.StrengthParamsCalcMethodsGUIContent, 1, GUILayout.MaxWidth(140));
foreach (StrengthParamsCalcMethod method in Enum.GetValues(typeof(StrengthParamsCalcMethod)))
{
if (GUILayout.Toggle((_config.StrengthCalcMethod == method), Constants.StrengthParamsCalcMethodsGUIContent[(int)method], _settingsToggleGroupStyle))
{
_config.StrengthCalcMethod = method;
Welder.StrengthCalcMethod = method;
}
}
GUILayout.Space(10.0f);
GUILayout.Label("MaxTemp calculation method");
// _config.MaxTempCalcMethod = (MaxTempCalcMethod)GUILayout.SelectionGrid((int)_config.MaxTempCalcMethod, Constants.MaxTempCalcMethodsGUIContent, 1, GUILayout.MaxWidth(140));
foreach (MaxTempCalcMethod method in Enum.GetValues(typeof(MaxTempCalcMethod)))
{
if (GUILayout.Toggle((_config.MaxTempCalcMethod == method), Constants.MaxTempCalcMethodsGUIContent[(int)method], _settingsToggleGroupStyle))
{
_config.MaxTempCalcMethod = method;
Welder.MaxTempCalcMethod = method;
}
}
GUILayout.EndScrollView();
// GUILayout.Space(10.0f);
if (GUILayout.Button(Constants.guiSaveSettingsButtonGUIContent, GUILayout.MaxWidth(160)))
{
FileManager.saveConfig(_config);
_config = FileManager.loadConfig();
}
}
else
{
_editorMainWindow.height = Constants.guiMainWindowH;
GUILayout.Space(20.0f);
}
//SelectPArtbranch button
if (GUILayout.RepeatButton(Constants.guiSelectPartGUIContent, GUILayout.MaxWidth(160)))
{
this.state = DisplayState.partSelection;
}
//Weld button
if (GUILayout.Button(Constants.guiWeldItButtonGUIContent, GUILayout.MaxWidth(160)))
{
FileManager.saveConfig(_config);
if (EditorLockManager.isEditorLocked())
{
if (_selectedPartbranch == null)
{
_selectedPartbranch = EditorLogic.RootPart;
}
repositionPreWeldment(_selectedPartbranch);
weldPart(_selectedPartbranch);
}
}
if (GUILayout.Button(Constants.guiCloseGUIContent, GUILayout.MaxWidth(160)))
{
closeMainwindow();
}
//Hints area
GUILayout.TextArea(GUI.tooltip, GUILayout.ExpandHeight(true), GUILayout.MaxHeight(100));
GUIStyle VersionLabelGUIStyle = new GUIStyle(GUI.skin.label);
VersionLabelGUIStyle.fontSize = 12;
GUILayout.Label(Constants.logVersion, VersionLabelGUIStyle);
GUILayout.EndVertical();
GUI.DragWindow();
} //private void OnMainWindow()