/*
GCode Process for building 3d DVP UV objects
* <Build Start>
* <Slicing Comments> comments containing the slicing and building parameters
* <Header Code> start.gcode - commands from this
* file are inserted, they contain whatever intiailization sequences are need to initialize the machine
* at this point, the build tray is in position to start printing a layer
* <Layer Start>
* Display the correct image slice for the current layer
* Delay for <Layertime> to expose the UV resin
* <Layer End>
*/
// here we prepare the gcode preprocessor and fill all nessesary variables
protected static PreProcessor PreparePreprocessor(SliceFile sf, MachineConfig pi)
{
PreProcessor pp = new PreProcessor();
pp.SetVar("$LayerThickness", sf.m_config.ZThick); // the thickenss of the layer in mm
pp.SetVar("$ZLiftDist", sf.m_config.liftdistance); // how far we're lifting
pp.SetVar("$ZLiftRate", sf.m_config.liftfeedrate); // the rate at which we're lifting
pp.SetVar("$ZRetractRate", sf.m_config.liftretractrate); // how fast we'r retracting
pp.SetVar("$SlideTiltVal", sf.m_config.slidetiltval); // any used slide / tilt value on the x axis
pp.SetVar("$BlankTime", sf.m_config.blanktime_ms); // how long to show the blank in ms
pp.SetVar("$LayerTime", sf.m_config.layertime_ms); // total delay for a layer for gcode commands to complete - not including expusre time
pp.SetVar("$FirstLayerTime", sf.m_config.firstlayertime_ms); // time to expose the first layers in ms
pp.SetVar("$NumFirstLayers", sf.m_config.numfirstlayers); // number of first layers
return pp;
}
/*
GCode Process for building 3d DVP UV objects
* <Build Start>
* <Slicing Comments> comments containing the slicing and building parameters
* <Header Code> start.gcode - commands from this
* file are inserted, they contain whatever intiailization sequences are need to initialize the machine
* at this point, the build tray is in position to start printing a layer
* <Layer Start>
* Display the correct image slice for the current layer
* Delay for <Layertime> to expose the UV resin
* <Layer End>
*/
// here we prepare the gcode preprocessor and fill all nessesary variables
protected static PreProcessor PreparePreprocessor(SliceFile sf, MachineConfig pi)
{
PreProcessor pp = new PreProcessor();
pp.SetVar("$LayerThickness", sf.m_config.ZThick);
pp.SetVar("$ZLiftDist", sf.m_config.liftdistance);
pp.SetVar("$ZLiftRate", sf.m_config.liftfeedrate);
pp.SetVar("$ZRetractRate", sf.m_config.liftretractrate);
pp.SetVar("$SlideTiltVal", sf.m_config.slidetiltval);
pp.SetVar("$BlankTime", sf.m_config.blanktime_ms);
pp.SetVar("$LayerTime", sf.m_config.layertime_ms);
pp.SetVar("$FirstLayerTime", sf.m_config.firstlayertime_ms);
return pp;
}