/// <summary>
/// Transform two triangles to two different triangles by flipping an edge
/// clockwise within a quadrilateral. Reverses the flip() operation so that
/// the data structures representing the triangles are back where they were
/// before the flip().
/// </summary>
/// <param name="flipedge"></param>
/// <remarks>
/// See above Flip() remarks for more information.
///
/// Upon completion of this routine, the 'flipedge' handle holds the edge
/// cd of triangle cdb, and is directed up, from vertex c to vertex d.
/// (Hence, the two triangles have rotated clockwise.)
/// </remarks>
internal void Unflip(ref Otri flipedge)
{
Otri botleft = default(Otri), botright = default(Otri);
Otri topleft = default(Otri), topright = default(Otri);
Otri top = default(Otri);
Otri botlcasing = default(Otri), botrcasing = default(Otri);
Otri toplcasing = default(Otri), toprcasing = default(Otri);
Osub botlsubseg = default(Osub), botrsubseg = default(Osub);
Osub toplsubseg = default(Osub), toprsubseg = default(Osub);
Vertex leftvertex, rightvertex, botvertex;
Vertex farvertex;
// Identify the vertices of the quadrilateral.
rightvertex = flipedge.Org();
leftvertex = flipedge.Dest();
botvertex = flipedge.Apex();
flipedge.Sym(ref top);
farvertex = top.Apex();
// Identify the casing of the quadrilateral.
top.Lprev(ref topleft);
topleft.Sym(ref toplcasing);
top.Lnext(ref topright);
topright.Sym(ref toprcasing);
flipedge.Lnext(ref botleft);
botleft.Sym(ref botlcasing);
flipedge.Lprev(ref botright);
botright.Sym(ref botrcasing);
// Rotate the quadrilateral one-quarter turn clockwise.
topleft.Bond(ref toprcasing);
botleft.Bond(ref toplcasing);
botright.Bond(ref botlcasing);
topright.Bond(ref botrcasing);
if (checksegments)
{
// Check for subsegments and rebond them to the quadrilateral.
topleft.Pivot(ref toplsubseg);
botleft.Pivot(ref botlsubseg);
botright.Pivot(ref botrsubseg);
topright.Pivot(ref toprsubseg);
if (toplsubseg.seg.hash == DUMMY)
{
botleft.SegDissolve(dummysub);
}
else
{
botleft.SegBond(ref toplsubseg);
}
if (botlsubseg.seg.hash == DUMMY)
{
botright.SegDissolve(dummysub);
}
else
{
botright.SegBond(ref botlsubseg);
}
if (botrsubseg.seg.hash == DUMMY)
{
topright.SegDissolve(dummysub);
}
else
{
topright.SegBond(ref botrsubseg);
}
if (toprsubseg.seg.hash == DUMMY)
{
topleft.SegDissolve(dummysub);
}
else
{
topleft.SegBond(ref toprsubseg);
}
}
// New vertex assignments for the rotated quadrilateral.
flipedge.SetOrg(botvertex);
flipedge.SetDest(farvertex);
flipedge.SetApex(leftvertex);
top.SetOrg(farvertex);
top.SetDest(botvertex);
top.SetApex(rightvertex);
}
/// <summary>
/// Transform two triangles to two different triangles by flipping an edge
/// counterclockwise within a quadrilateral.
/// </summary>
/// <param name="flipedge">Handle to the edge that will be flipped.</param>
/// <remarks>Imagine the original triangles, abc and bad, oriented so that the
/// shared edge ab lies in a horizontal plane, with the vertex b on the left
/// and the vertex a on the right. The vertex c lies below the edge, and
/// the vertex d lies above the edge. The 'flipedge' handle holds the edge
/// ab of triangle abc, and is directed left, from vertex a to vertex b.
///
/// The triangles abc and bad are deleted and replaced by the triangles cdb
/// and dca. The triangles that represent abc and bad are NOT deallocated;
/// they are reused for dca and cdb, respectively. Hence, any handles that
/// may have held the original triangles are still valid, although not
/// directed as they were before.
///
/// Upon completion of this routine, the 'flipedge' handle holds the edge
/// dc of triangle dca, and is directed down, from vertex d to vertex c.
/// (Hence, the two triangles have rotated counterclockwise.)
///
/// WARNING: This transformation is geometrically valid only if the
/// quadrilateral adbc is convex. Furthermore, this transformation is
/// valid only if there is not a subsegment between the triangles abc and
/// bad. This routine does not check either of these preconditions, and
/// it is the responsibility of the calling routine to ensure that they are
/// met. If they are not, the streets shall be filled with wailing and
/// gnashing of teeth.
///
/// Terminology
///
/// A "local transformation" replaces a small set of triangles with another
/// set of triangles. This may or may not involve inserting or deleting a
/// vertex.
///
/// The term "casing" is used to describe the set of triangles that are
/// attached to the triangles being transformed, but are not transformed
/// themselves. Think of the casing as a fixed hollow structure inside
/// which all the action happens. A "casing" is only defined relative to
/// a single transformation; each occurrence of a transformation will
/// involve a different casing.
/// </remarks>
internal void Flip(ref Otri flipedge)
{
Otri botleft = default(Otri), botright = default(Otri);
Otri topleft = default(Otri), topright = default(Otri);
Otri top = default(Otri);
Otri botlcasing = default(Otri), botrcasing = default(Otri);
Otri toplcasing = default(Otri), toprcasing = default(Otri);
Osub botlsubseg = default(Osub), botrsubseg = default(Osub);
Osub toplsubseg = default(Osub), toprsubseg = default(Osub);
Vertex leftvertex, rightvertex, botvertex;
Vertex farvertex;
// Identify the vertices of the quadrilateral.
rightvertex = flipedge.Org();
leftvertex = flipedge.Dest();
botvertex = flipedge.Apex();
flipedge.Sym(ref top);
// SELF CHECK
//if (top.triangle.id == DUMMY)
//{
// logger.Error("Attempt to flip on boundary.", "Mesh.Flip()");
// flipedge.LnextSelf();
// return;
//}
//if (checksegments)
//{
// flipedge.SegPivot(ref toplsubseg);
// if (toplsubseg.ss != Segment.Empty)
// {
// logger.Error("Attempt to flip a segment.", "Mesh.Flip()");
// flipedge.LnextSelf();
// return;
// }
//}
farvertex = top.Apex();
// Identify the casing of the quadrilateral.
top.Lprev(ref topleft);
topleft.Sym(ref toplcasing);
top.Lnext(ref topright);
topright.Sym(ref toprcasing);
flipedge.Lnext(ref botleft);
botleft.Sym(ref botlcasing);
flipedge.Lprev(ref botright);
botright.Sym(ref botrcasing);
// Rotate the quadrilateral one-quarter turn counterclockwise.
topleft.Bond(ref botlcasing);
botleft.Bond(ref botrcasing);
botright.Bond(ref toprcasing);
topright.Bond(ref toplcasing);
if (checksegments)
{
// Check for subsegments and rebond them to the quadrilateral.
topleft.Pivot(ref toplsubseg);
botleft.Pivot(ref botlsubseg);
botright.Pivot(ref botrsubseg);
topright.Pivot(ref toprsubseg);
if (toplsubseg.seg.hash == DUMMY)
{
topright.SegDissolve(dummysub);
}
else
{
topright.SegBond(ref toplsubseg);
}
if (botlsubseg.seg.hash == DUMMY)
{
topleft.SegDissolve(dummysub);
}
else
{
topleft.SegBond(ref botlsubseg);
}
if (botrsubseg.seg.hash == DUMMY)
{
botleft.SegDissolve(dummysub);
}
else
{
botleft.SegBond(ref botrsubseg);
}
if (toprsubseg.seg.hash == DUMMY)
{
botright.SegDissolve(dummysub);
}
else
{
botright.SegBond(ref toprsubseg);
}
}
// New vertex assignments for the rotated quadrilateral.
flipedge.SetOrg(farvertex);
flipedge.SetDest(botvertex);
flipedge.SetApex(rightvertex);
top.SetOrg(botvertex);
top.SetDest(farvertex);
top.SetApex(leftvertex);
}
