/// <summary>
/// 发送串口命令
/// </summary>
/// <param name="SendData">发送数据</param>
/// <param name="ReceiveData">接收数据</param>
/// <param name="Overtime">重复次数</param>
/// <returns></returns>
public int SendCommand(byte[] SendData, ref byte[] ReceiveData, int Overtime)
{
int ret = 0;
try
{
if (!(comPort.IsOpen))
{
comPort.Open();
}
ReceiveEventFlag = true; //关闭接收事件
comPort.ReadExisting();
comPort.Write(SendData, 0, SendData.Length);
System.Threading.Thread.Sleep(Overtime);
if (comPort.BytesToRead >= ReceiveData.Length)
{
ret = comPort.Read(ReceiveData, 0, ReceiveData.Length);
}
ReceiveEventFlag = false; //打开事件
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
return(ret);
}
/// <summary>
/// 只连接 不绑定 事件
/// </summary>
public bool OnlyConnect()
{
bool blRet = false;
try
{
if (string.IsNullOrEmpty(strIp))
{
MessageUtil.ShowTips("指纹门禁IP为空");
return(blRet);
}
if (iPort == 0)
{
MessageUtil.ShowTips(strIp + "-指纹门禁端口号未设置");
return(blRet);
}
blRet = axCZKEM1.Connect_Net(strIp, iPort);
if (blRet == true)
{
blConnoct = true;
}
else
{
blRet = false;
}
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
return(blRet);
}
public bool GetDoorState(ref DoorsState state)
{
bool blRet = false;
try
{
int iState = 0;
if (axCZKEM1.GetDoorState(iMachineNumber, ref iState))
{
blRet = true;
if (iState == 0)
{
state = DoorsState.开门;
}
else if (iState == 1)
{
state = DoorsState.关门;
}
}
else
{
blRet = false;
}
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
return(blRet);
}
/// <summary>
/// 打开端口
/// </summary>
/// <returns></returns>
public void OpenPort()
{
try
{
if (comPort.IsOpen)
{
comPort.Close();
}
comPort.PortName = _portName;
comPort.BaudRate = (int)_baudRate;
comPort.Parity = _parity;
comPort.DataBits = (int)_dataBits;
comPort.StopBits = _stopBits;
comPort.Open();
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
}
private void timerWg_Execute()
{
try
{
if (watching != null)
{
updateControllerStatus();
if (QueRecText.Count > 0)
{
txtInfoHaveNewInfoEntry();
}
Application.DoEvents();//2010-8-1 09:09:06 显示
}
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
if (watching != null)
{
timerWg.Start();//下次执行
System.Threading.Interlocked.Exchange(ref dealingTxt, 0);
}
}
}
/// <summary>
/// 连接控制器
/// </summary>
/// <returns></returns>
public async Task <bool> ConnectZk()
{
bool blRet = false;
await Task.Factory.StartNew(() => {
try
{
if (string.IsNullOrEmpty(strIp))
{
MessageUtil.ShowTips("指纹门禁 IP 为空");
return(blRet);
}
if (iPort == 0)
{
MessageUtil.ShowTips("指纹门禁 端口号 未设置");
return(blRet);
}
blRet = axCZKEM1.Connect_Net(strIp, iPort);
if (blRet == true)
{ //连接成功
blConnoct = true;
int iMachineNumber = 1; //In fact,when you are using the tcp/ip communication,this parameter will be ignored,that is any integer will all right.Here we use 1.
if (axCZKEM1.RegEvent(iMachineNumber, 65535))
{
blRet = true;
//当验证通过时触发该事件
this.axCZKEM1.OnAttTransactionEx += new zkemkeeper._IZKEMEvents_OnAttTransactionExEventHandler(axCZKEM1_OnAttTransactionEx);
this.axCZKEM1.OnDoor += new zkemkeeper._IZKEMEvents_OnDoorEventHandler(axCZKEM1_OnDoor);
this.axCZKEM1.OnAlarm += new zkemkeeper._IZKEMEvents_OnAlarmEventHandler(axCZKEM1_OnAlarm);
this.axCZKEM1.OnDisConnected += new zkemkeeper._IZKEMEvents_OnDisConnectedEventHandler(axCZKEM1_OnDisConnected);
}
else
{
blRet = false;
//axCZKEM1.GetLastError(ref idwErrorCode);
//lbRTShow.Items.Add("连接设备失败，错误码： " + idwErrorCode.ToString());
}
}
else
{
blRet = false;
//axCZKEM1.GetLastError(ref idwErrorCode);
//lbRTShow.Items.Add("连接设备失败，错误码： " + idwErrorCode.ToString());
}
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
return(blRet);
});
return(blRet);
}
/// <summary>
/// 加载所有工具柜
/// </summary>
//public void LoadBox()
//{
// try
// {
// #region 工具柜门禁
// if (boxDoorWatching != null)
// {
// boxDoorWatching.PauseWatch();
// if (clsWgWatchingBox.listWg.Count > 0)
// {
// lock (clsWgWatchingBox.listWg)
// {
// clsWgWatchingBox.listWg.Clear();
// }
// }
// }
// string strSql = "select tvChildId,AreaName,PlaceName,DoorIp,DoorSn,BoxHasRfid,BoxRfidMain from tb_Tools where " +
// "IsArea='" + ToolAreaType.工具柜.ToString() + "' and HasDoor='" + DeviceUsing.启用.ToString() + "' ";
// DataTable dt = datalogic.GetDataTable(strSql);
// foreach (DataRow datarow in dt.Rows)
// {
// string strChildId = datarow["tvChildId"].ToString();
// string strArea = datarow["AreaName"].ToString();
// string strName = datarow["PlaceName"].ToString();
// string strIp = datarow["DoorIp"].ToString();
// string strSn = datarow["DoorSn"].ToString();
// string strHasRfid = datarow["BoxHasRfid"].ToString();
// string strRfidMain = datarow["BoxRfidMain"].ToString();
// uint iSn = 0;
// if (!string.IsNullOrEmpty(strSn))
// {
// iSn = Convert.ToUInt32 (strSn);
// }
// else
// {
// MessageUtil.ShowTips(strName + " 工具柜门禁SN为空");
// }
// clsDoorBox boxDoor = new clsDoorBox(strIp, iSn, strName, strArea);
// boxDoor.StrChildId = strChildId;
// boxDoor.StrHasRfid = strHasRfid;
// boxDoor.StrRfidMain = strRfidMain;
// lock (clsWgWatchingBox.listWg)
// {
// clsWgWatchingBox.listWg.Add(boxDoor);
// }
// }
// if (clsWgWatchingBox.listWg.Count > 0)
// {
// if (boxDoorWatching == null)
// {
// boxDoorWatching = new clsWgWatchingBox();
// }
// boxDoorWatching.StartWatch();
// frmMain.UsingBox = DeviceUsing.启用;
// }
// else
// {
// frmMain.UsingBox = DeviceUsing.未启用;
// if (boxDoorWatching != null)
// {
// boxDoorWatching.StopWatch();
// boxDoorWatching = null;
// }
// }
// #endregion
// #region
// //#region 工具柜RFID
// //if (listBoxRfid.Count > 0)
// //{
// // lock (listBoxRfid)
// // {
// // for (int iIndexRfid = 0; iIndexRfid < listBoxRfid.Count; iIndexRfid++)
// // {
// // if (listBoxRfid[iIndexRfid] != null)
// // {
// // if (listBoxRfid[iIndexRfid].StateMainRead != BoxRfidState.不读)
// // listBoxRfid[iIndexRfid].StateMainRead = BoxRfidState.不读;
// // if (listBoxRfid[iIndexRfid].StateSlaveRead != BoxRfidState.不读)
// // listBoxRfid[iIndexRfid].StateSlaveRead = BoxRfidState.不读;
// // if (listBoxRfid[iIndexRfid].timerRfidFast.State == TimerState.Running)
// // listBoxRfid[iIndexRfid].StopRead();
// // if (listBoxRfid[iIndexRfid].BlConnent)
// // {
// // listBoxRfid[iIndexRfid].CloseNetPort();
// // }
// // if (listBoxRfid[iIndexRfid].timerRfidFast != null)
// // listBoxRfid[iIndexRfid].timerRfidFast = null;
// // listBoxRfid[iIndexRfid] = null;
// // }
// // }
// // listBoxRfid.Clear();
// // }
// //}
// //strSql = "select tvChildId,AreaName,PlaceName,BoxRfidIp,BoxRfidPort,BoxRfidMain,BoxRfidAnt1,BoxRfidAnt2,BoxRfidAnt3,BoxRfidAnt4 from tb_Tools where " +
// // "IsArea='" + ToolAreaType.工具柜.ToString() + "' and BoxHasRfid='" + DeviceUsing.启用.ToString() + "' ";
// //dt = datalogic.GetDataTable(strSql);
// //foreach (DataRow datarow in dt.Rows)
// //{
// // string strId = datarow["tvChildId"].ToString();
// // string strArea = datarow["AreaName"].ToString();
// // string strName = datarow["PlaceName"].ToString();
// // string strIp = datarow["BoxRfidIp"].ToString();
// // string strPort = datarow["BoxRfidPort"].ToString();
// // string strMain = datarow["BoxRfidMain"].ToString();
// // #region 天线
// // DeviceUsing ant1 = DeviceUsing.未启用;
// // DeviceUsing ant2 = DeviceUsing.未启用;
// // DeviceUsing ant3 = DeviceUsing.未启用;
// // DeviceUsing ant4 = DeviceUsing.未启用;
// // string strAnt = datarow["BoxRfidAnt1"].ToString();
// // if (strAnt == DeviceUsing.启用.ToString())
// // ant1 = DeviceUsing.启用;
// // else
// // ant1 = DeviceUsing.未启用;
// // strAnt = datarow["BoxRfidAnt2"].ToString();
// // if (strAnt == DeviceUsing.启用.ToString())
// // ant2 = DeviceUsing.启用;
// // else
// // ant2 = DeviceUsing.未启用;
// // strAnt = datarow["BoxRfidAnt3"].ToString();
// // if (strAnt == DeviceUsing.启用.ToString())
// // ant3 = DeviceUsing.启用;
// // else
// // ant3 = DeviceUsing.未启用;
// // strAnt = datarow["BoxRfidAnt4"].ToString();
// // if (strAnt == DeviceUsing.启用.ToString())
// // ant4 = DeviceUsing.启用;
// // else
// // ant4 = DeviceUsing.未启用;
// // #endregion
// // bool blHas = false;
// // int iPort = 0;
// // if (!string.IsNullOrEmpty(strPort))
// // {
// // iPort = Convert.ToInt32(strPort);
// // }
// // else
// // {
// // MessageUtil.ShowTips(strName + " 工具柜RFID端口号为空");
// // }
// // #region 已有
// // if (listBoxRfid.Count > 0)
// // {
// // int iCount = listBoxRfid.Count;
// // for (int iIndex = 0; iIndex < iCount; iIndex++)
// // {
// // if (listBoxRfid[iIndex].StrIp == strIp && listBoxRfid[iIndex].IPort == iPort)
// // {
// // blHas = true;
// // if (listBoxRfid[iIndex].StrChildIdMain == null)
// // {
// // listBoxRfid[iIndex].StrChildIdMain = strId;
// // listBoxRfid[iIndex].StrNameMain = strName;
// // listBoxRfid[iIndex].AntMain1 = ant1;
// // listBoxRfid[iIndex].AntMain2 = ant2;
// // }
// // else if (listBoxRfid[iIndex].StrChildIdSlave == null)
// // {
// // listBoxRfid[iIndex].StrChildIdSlave = strId;
// // listBoxRfid[iIndex].StrNameSlave = strName;
// // listBoxRfid[iIndex].AntSlave1 = ant3;
// // listBoxRfid[iIndex].AntSlave2 = ant4;
// // }
// // }
// // }
// // }
// // #endregion
// // #region 无，添加
// // if (blHas == false)
// // {
// // RfidReadBox rfidRead = new RfidReadBox();
// // rfidRead.StrIp = strIp;
// // rfidRead.IPort = iPort;
// // if (strMain == BoxRfidMain.主机.ToString())
// // {
// // rfidRead.StrChildIdMain = strId;
// // rfidRead.StrNameMain = strName;
// // rfidRead.AntMain1 = ant1;
// // rfidRead.AntMain2 = ant2;
// // }
// // else if (strMain == BoxRfidMain.从机.ToString())
// // {
// // rfidRead.StrChildIdSlave = strId;
// // rfidRead.StrNameSlave = strName;
// // rfidRead.AntSlave1 = ant3;
// // rfidRead.AntSlave2 = ant4;
// // }
// // lock (listBoxRfid)
// // {
// // listBoxRfid.Add(rfidRead);
// // }
// // }
// // #endregion
// //}
// ////设置工具柜RFID天线
// ////for (int iIndex = 0; iIndex < listBoxRfid.Count; iIndex++)
// ////{
// //// DeviceUsing ant1 = listBoxRfid[iIndex].AntMain1;
// //// DeviceUsing ant2 = listBoxRfid[iIndex].AntMain2;
// //// DeviceUsing ant3 = listBoxRfid[iIndex].AntSlave1;
// //// DeviceUsing ant4 = listBoxRfid[iIndex].AntSlave2;
// ////}
// ////if (listBoxDoor.Count > 0)
// ////{
// //// //timerBoxDoor.Start();
// ////}
// ////else
// ////{
// //// //timerBoxDoor.Stop();
// ////}
// //#endregion
// #endregion
// }
// catch (Exception ex)
// {
// if (frmMain.blDebug)
// MessageUtil.ShowTips(ex.Message);
// }
//}
/// <summary>
/// 加载 所有工具
/// </summary>
public void LoadAllTools()
{
try
{
#region 加载所有工器具
string strSql = "select tvParent,ToolID,RFIDCoding,BorrowReturnTime,IsInStore,ToolType,ToolName,BorrowPeople,StoragePlace" +
" from tb_Tools where IsArea='" + ToolAreaType.工具.ToString() + "' and RFIDCoding <> '' ";
DataTable dt = datalogic.GetDataTable(strSql);
listTools.Clear();
if (dicTools != null && dicTools.Count > 0)
{
dicTools.Clear();
}
foreach (DataRow dr in dt.Rows)//dtTools ToolID RfidCoding ToolBR TimeBR ToolType ToolName
{
string strType = dr["ToolType"].ToString();
string strName = dr["ToolName"].ToString();
string strId = dr["ToolID"].ToString();
string strRfid = dr["RFIDCoding"].ToString();
string strTime = dr["BorrowReturnTime"].ToString();
string strState = dr["IsInStore"].ToString();
string strPeo = dr["BorrowPeople"].ToString();
string strTimeBorr = dr["BorrowReturnTime"].ToString();
string strParent = dr["tvParent"].ToString();
string strStation = dr["StoragePlace"].ToString();
ToolsState state = (ToolsState)Enum.Parse(typeof(ToolsState), strState);
DateTime dtime = DateTime.Now;
if (!string.IsNullOrEmpty(strTime))
{
dtime = Convert.ToDateTime(strTime);
}
ToolInfo toolsInfo = new ToolInfo(strId, strType, strName, strRfid, state, dtime, strPeo, "", strParent, strStation);
listTools.Add(toolsInfo);
if (!dicTools.ContainsKey(strRfid))
{
dicTools.Add(strRfid, toolsInfo);
}
}
#endregion
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
}
/// <summary>
/// 只断开连接 不注销事件
/// </summary>
public void OnlyDisConnect()
{
try
{
axCZKEM1.Disconnect();
blConnoct = false;
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
}
public bool DeleteUserInfo(string strId)
{
bool blRet = false;
try
{
blRet = axCZKEM1.SSR_DeleteEnrollData(iMachineNumber, strId, 12);
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
return(blRet);
}
/// <summary>
/// 写入数据
/// </summary>
/// <param name="msg">包含要写入端口的字节数组</param>
/// <param name="offset">参数从0字节开始的字节偏移量</param>
/// <param name="count">要写入的字节数</param>
public void WriteData(byte[] msg, int offset, int count)
{
try
{
if (!(comPort.IsOpen))
{
comPort.Open();
}
comPort.Write(msg, offset, count);
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
}
/// <summary>
/// 写入数据
/// </summary>
/// <param name="msg">写入端口的字节数组</param>
public void WriteData(byte[] msg)
{
try
{
if (!(comPort.IsOpen))
{
comPort.Open();
}
comPort.Write(msg, 0, msg.Length);
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
}
/// <summary>
/// 写入数据
/// </summary>
/// <param name="msg"></param>
public void WriteData(string msg)
{
try
{
if (!(comPort.IsOpen))
{
comPort.Open();
}
comPort.ReadExisting();
comPort.Write(msg);
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
}
/// <summary>
/// 添加或修改 用户信息
/// </summary>
/// <param name="strUserNo"></param>
/// <param name="strName"></param>
/// <param name="strPsw"></param>
/// <param name="iPrivilege"></param>
/// <returns></returns>
public bool SetUserInfo(string strUserNo, string strName, string strPsw, int iPrivilege)
{
bool blRet = false;
try
{
axCZKEM1.EnableDevice(iMachineNumber, false);
blRet = axCZKEM1.SSR_SetUserInfo(iMachineNumber, strUserNo, strName, strPsw, iPrivilege, true);
axCZKEM1.EnableDevice(iMachineNumber, true);
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
return(blRet);
}
/// <summary>
/// 断开连接
/// </summary>
public void DisConnect()
{
try
{
axCZKEM1.Disconnect();
blConnoct = false;
//当验证通过时触发该事件
this.axCZKEM1.OnAttTransactionEx -= new zkemkeeper._IZKEMEvents_OnAttTransactionExEventHandler(axCZKEM1_OnAttTransactionEx);
this.axCZKEM1.OnDoor -= new zkemkeeper._IZKEMEvents_OnDoorEventHandler(axCZKEM1_OnDoor);
this.axCZKEM1.OnAlarm -= new zkemkeeper._IZKEMEvents_OnAlarmEventHandler(axCZKEM1_OnAlarm);
this.axCZKEM1.OnDisConnected -= new zkemkeeper._IZKEMEvents_OnDisConnectedEventHandler(axCZKEM1_OnDisConnected);
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
}
/// <summary>
/// 发送string数据命令
/// </summary>
/// <param name="strSend"></param>
/// <param name="Overtime"></param>
/// <returns></returns>
//public string SendReceStr(string strSend, int Overtime)
//{
// string strRece="";
// try
// {
// if (!(comPort.IsOpen)) comPort.Open();
// comPort.ReadExisting();
// comPort.Write(strSend);
// System.Threading.Thread.Sleep(Overtime);
// strRece = comPort.ReadExisting();
// }
// catch (Exception ex)
// {
// if (frmMain.blDebug)
// MessageUtil.ShowTips(ex.Message);
// }
// return strRece;
//}
public string SendReceStr(string strSend, int Overtime, IsWait isWait)
{
string strRece = "";
try
{
if (!(comPort.IsOpen))
{
comPort.Open();
}
comPort.ReadExisting();
comPort.Write(strSend);
for (int i = 0; i < Overtime; i++)
{
if (isWait == IsWait.OnlyWait)
{
Thread.Sleep(100);
}
else if (isWait == IsWait.CanStop)
{
if (clsEnvirControl.blAskAir)
{
Thread.Sleep(100);
}
else
{
i = Overtime;
}
}
}
strRece = comPort.ReadExisting();
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
return(strRece);
}
/// <summary>
/// 加载房间设备 一个房间对应的温湿度、烟感、空调控制器地址等
/// </summary>
public void LoadRooms()
{
clsEnvirControl.listRoom.Clear();
//string strSql = "select ID,RoomName,WsdAddr1,WsdAddr2,FireAddr1,FireAddr2,RelayAddr,AirAddr,AirFactory,AirAddr2,AirFactory2 from tb_RoomInfo ";
//DataTable dtRoom = datalogic.GetDataTable(strSql);
IList <TbRoominfo> list = TbRoominfo.FindAll("", "ID ASC", "", 0, 0);
if (list != null && list.Count > 0)
{
foreach (TbRoominfo roominfo in list)
{
try
{
int iWsd1 = 0;
int iWsd2 = 0;
int iAir1 = 0;
int iAir2 = 0;
int iRelay = 0;
RoomClass room = new RoomClass(roominfo.RoomName);
room.YGCount = roominfo.YGCount;
room.WSDCount = roominfo.WSDCount;
room.KTCount = roominfo.KTCount;
room.IsExistCSJ = roominfo.IsExistCsj == DeviceUsing.启用.ToString() ? true : false;
room.IsExistJDQ = roominfo.IsExistRealy == DeviceUsing.启用.ToString() ? true : false;
room.IsExistJRQ = roominfo.IsExistJrq == DeviceUsing.启用.ToString() ? true : false;
room.IsExistXF = roominfo.IsExistXf == DeviceUsing.启用.ToString() ? true : false;
//温湿度
if (!string.IsNullOrEmpty(roominfo.WsdAddr1))
{
iWsd1 = Convert.ToInt32(roominfo.WsdAddr1);
}
if (!string.IsNullOrEmpty(roominfo.WsdAddr2))
{
iWsd2 = Convert.ToInt32(roominfo.WsdAddr2);
}
if (roominfo.WSDCount > 0)
{
if (iWsd1 != 0)
{
clsWsd wsd = new clsWsd(iWsd1);
room.listWsd.Add(wsd);
}
if (iWsd2 != 0)
{
clsWsd wsd = new clsWsd(iWsd2);
room.listWsd.Add(wsd);
}
}
//烟感
if (!string.IsNullOrEmpty(roominfo.FireAddr1))
{
clsFire fire = new clsFire(roominfo.FireAddr1);
room.listFire.Add(fire);
}
if (!string.IsNullOrEmpty(roominfo.FireAddr2))
{
clsFire fire = new clsFire(roominfo.FireAddr2);
room.listFire.Add(fire);
}
//空调控制器
if (roominfo.KTCount >= 2)
{//2个空调
if (!string.IsNullOrEmpty(roominfo.AirAddr))
{
iAir1 = Convert.ToInt32(roominfo.AirAddr);
}
if (!string.IsNullOrEmpty(roominfo.AirAddr2))
{
iAir2 = Convert.ToInt32(roominfo.AirAddr2);
}
if (iAir1 != 0)
{
AirFactoryType airType = AirFactoryType.大金;
if (roominfo.AirFactory != "大金")
{
airType = AirFactoryType.其他;
}
clsAir air = new clsAir(iAir1, airType);
room.listAir.Add(air);
}
if (iAir2 != 0)
{
AirFactoryType airType = AirFactoryType.大金;
if (roominfo.AirFactory2 != "大金")
{
airType = AirFactoryType.其他;
}
clsAir air = new clsAir(iAir2, airType);
room.listAir.Add(air);
}
}
else
{
if (!string.IsNullOrEmpty(roominfo.AirAddr))
{
iAir1 = Convert.ToInt32(roominfo.AirAddr);
}
if (iAir1 != 0)
{
AirFactoryType airType = AirFactoryType.大金;
if (roominfo.AirFactory != "大金")
{
airType = AirFactoryType.其他;
}
clsAir air = new clsAir(iAir1, airType);
room.listAir.Add(air);
}
}
//继电器板
if (!string.IsNullOrEmpty(roominfo.RelayAddr))
{
iRelay = Convert.ToInt32(roominfo.RelayAddr);
}
if (iRelay != 0)
{
room.roomRelay = new clsRelay(iRelay);
}
clsEnvirControl.listRoom.Add(room);
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
}
RoomClass roomrelay = clsEnvirControl.listRoom.Find(p => p.roomRelay != null);
foreach (RoomClass room in clsEnvirControl.listRoom)
{
if (room.roomRelay == null)
{
room.roomRelay = roomrelay.roomRelay;
}
}
}
}
private void timerMain_Execute()
{
try
{
#region 报语音
if (listVoice.Count > 0)
{
TimeSpan span = DateTime.Now - timeLastVoice;
if (span.TotalSeconds > iVoiceLen)
{
string strVoice = listVoice[0];
timeLastVoice = DateTime.Now;
iVoiceLen = (int)(strVoice.Length * 0.42);
bool blRet = serialVoice.SendVoice(strVoice);
if (blRet)
{
lock (listVoice)
{
listVoice.RemoveAt(0);
}
}
}
}
if (blVoiceOpenDoor)
{
TimeSpan ts = DateTime.Now - timeLastVoice;// TotalSeconds
if (ts.TotalMinutes >= ciIntervalVoice)
{
string statu = SoundPlayerHelper.Status;
{
if (statu != VoiceState.播放.ToString())
{
string str = Application.StartupPath + "\\Voice\\欢迎.WAV";
SoundPlayerHelper.Play(str, false);
blVoiceOpenDoor = false;
timeLastVoice = DateTime.Now;
blVoiceBorrOver = true;
}
}
}
}
#endregion
if (infoOfSystem.usingBorrOver == DeviceUsing.启用)
{
#region 开门后 报外借超时
if (blVoiceBorrOver)
{
bool blHasOver = false;//是否有外借超时
for (int iToos = 0; iToos < listTools.Count; iToos++)
{
if (listTools[iToos].ToolState == ToolsState.外借超时)
{
blHasOver = true;
break;
}
}
if (blHasOver)
{
TimeSpan ts = DateTime.Now - timeLastVoice;// TotalSeconds
if (ts.TotalMinutes >= ciIntervalVoice)
{
string statu = SoundPlayerHelper.Status;
{
if (statu != VoiceState.播放.ToString())
{
string str = Application.StartupPath + "\\Voice\\工器具借出超时.WAV";
SoundPlayerHelper.Play(str, false);
timeLastVoice = DateTime.Now;
blVoiceBorrOver = false;
}
}
}
}
else
{
blVoiceBorrOver = false;
}
}
#endregion
#region 判读借出超时 一天判断一次
TimeSpan tsOver = DateTime.Now - timeBorrOver;// TotalSeconds
if (tsOver.TotalDays >= 1)
{
timeBorrOver = DateTime.Now;
for (int iToos = 0; iToos < listTools.Count; iToos++)
{
if (listTools[iToos].ToolState == ToolsState.借出 || listTools[iToos].ToolState == ToolsState.外借超时)
{
DateTime timeBorr = listTools[iToos].TimeBorrRet;
TimeSpan ts = DateTime.Now - timeBorr;
if (ts.TotalDays >= infoOfSystem.iOverDayBorr)
{
string strId = listTools[iToos].StrToolId;
string strPeople = listTools[iToos].StrPeopel;
string strTimeBorr = listTools[iToos].TimeBorrRet.ToString("yyyy-MM-dd");
ts = DateTime.Now - listTools[iToos].TimeBorrRet;
string strDuration = clsCommon.CalculateTime(ts);
string strType = AlarmsType.外借超时.ToString();
string strContent = strTimeBorr + "借出，借出时长：" + strDuration;
string strTime = DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss");
string strRfid = listTools[iToos].StrRfidCode;
DataRow dr = dtNewAlarm.NewRow();
dr["Type"] = strType;
dr["Point"] = strId;
dr["Content"] = strContent;
dr["People"] = strPeople;
dr["Time"] = strTime;
dtNewAlarm.Rows.Add(dr);
//tb_AlarmEvent Type Point EventContent People Time
string strSql = "insert into tb_AlarmEvent (Type,Point,EventContent,People,Time)" +
"values ('" + strType + "','" + strId + "','" + strContent + "','" + strPeople + "','" + strTime + "')";
datalogic.SqlComNonQuery(strSql);
strSql = "update tb_Tools set IsInStore='" + ToolsState.外借超时.ToString() + "' where RFIDCoding='" + strRfid + "' ";
datalogic.SqlComNonQuery(strSql);
lock (listTools)
{
listTools[iToos].ToolState = ToolsState.外借超时;
}
}
}
}
}
#endregion
}
}
catch (Exception ex)
{
if (frmMain.blDebug)
{
MessageUtil.ShowTips(ex.Message);
}
}
}
public bool AddPower(string strIcNo)
{
bool blRet = false;
#region 添加 权限 发送
bSendDoor[1] = MainControl.bDoorAddrL;
bSendDoor[2] = MainControl.bDoorAddrH;
bSendDoor[3] = 0x07;
bSendDoor[4] = 0x11;
bSendDoor[5] = 0x00;
bSendDoor[6] = 0x00;
//IC卡号
try
{
string strTemp = strIcNo.Substring(3, 5);
int iTemp = Convert.ToInt32(strTemp);
bSendDoor[7] = (byte)(iTemp & 0xff);
bSendDoor[8] = (byte)((iTemp >> 8) & 0xff);
strTemp = strIcNo.Substring(0, 3);
bSendDoor[9] = Convert.ToByte(strTemp);
}
catch (Exception ex)
{
MessageUtil.ShowTips(ex.Message);
}
//门号
bSendDoor[10] = 0x01;
//起始年月 2000年01月01
bSendDoor[11] = 0x21;
bSendDoor[12] = 0x00;
//终止年月 2050年12月31
bSendDoor[13] = 0x9F;
bSendDoor[14] = 0x65;
//时段
bSendDoor[15] = 0x01;
//密码 40 E2 01
bSendDoor[16] = 0x40;
bSendDoor[17] = 0xE2;
bSendDoor[18] = 0x01;
for (int i = 19; i < 31; i++)
{
bSendDoor[i] = 0;
}
int iCheckSun = 0;
for (int i = 1; i < 31; i++)
{
iCheckSun += bSendDoor[i];
}
bSendDoor[31] = (byte)(iCheckSun & 0x00ff);
bSendDoor[32] = (byte)(iCheckSun >> 8);
//txt 发送
string strContent = SerialPortUtil.ByteToHex(bSendDoor);
txtLog.WriteTxt("Door.txt", "AddPower Send", strContent, false);
byte[] bRece = new byte[34];
int iLength = doorSerial.SendReceByte(bSendDoor, ref bRece, 500);
//txt 接受
if (iLength > 0)
{
strContent = SerialPortUtil.ByteToHex(bRece);
txtLog.WriteTxt("Door.txt", "AddPower Rece", strContent, true);//01 01 01 0F 11 8C
}
#endregion
#region 接受 判断
if (iLength == 34)
{
iCheckSun = 0;
for (int i = 1; i < 31; i++)
{
iCheckSun += bRece[i];
}
byte bL = (byte)(iCheckSun & 0x00ff);
byte bH = (byte)(iCheckSun >> 8);
if (bRece[0] == 0x7E && bRece[1] == MainControl.bDoorAddrL && bRece[2] == MainControl.bDoorAddrH && bRece[3] == 0x07 && bRece[4] == 0x11 &&
bRece[31] == bL && bRece[32] == bH && bRece[33] == 0x0D)
{
if (bRece[5] == 0x01)
{
blRet = true;
}
else
{
blRet = false;
}
}
else
{
blRet = false;
}
}
else
{
blRet = false;
}
#endregion
return(blRet);
}
/// <summary>
/// 判断时间 误差大于1分钟 校时
/// </summary>
/// <param name="ReceBuff"></param>
private void JudgeDatetime(byte[] ReceBuff)
{
int iYear = ConvertBCDToInt(ReceBuff[5]);
iYear += 2000;
int iMonth = ConvertBCDToInt(ReceBuff[6]);
int iDay = ConvertBCDToInt(ReceBuff[7]);
int iHour = ConvertBCDToInt(ReceBuff[9]);
int iMinute = ConvertBCDToInt(ReceBuff[10]);
int iSecond = ConvertBCDToInt(ReceBuff[11]);
DateTime dtRece = new DateTime(iYear, iMonth, iDay, iHour, iMinute, iSecond);
TimeSpan ts = DateTime.Now - dtRece;//记录历史温湿度数据间隔
if (ts.TotalSeconds >= 59 || ts.TotalSeconds <= -59)
{
DateTime dtNow = DateTime.Now;
bSendDoor[1] = MainControl.bDoorAddrL;
bSendDoor[2] = MainControl.bDoorAddrH;
bSendDoor[3] = 0x8B;
bSendDoor[4] = 0x10;
int i = dtNow.Year;
if (i >= 2000)
{
i -= 2000;
}
bSendDoor[5] = ConvertBCD((byte)i);
bSendDoor[6] = ConvertBCD((byte)(dtNow.Month));
bSendDoor[7] = ConvertBCD((byte)(dtNow.Day));
byte b = ConverWeekToInt(dtNow.DayOfWeek.ToString());
bSendDoor[8] = ConvertBCD(b);//周
bSendDoor[9] = ConvertBCD((byte)(dtNow.Hour));
bSendDoor[10] = ConvertBCD((byte)(dtNow.Minute));
bSendDoor[11] = ConvertBCD((byte)(dtNow.Second));
int iCheckSun = 0;
for (i = 1; i < 31; i++)
{
iCheckSun += bSendDoor[i];
}
bSendDoor[31] = (byte)(iCheckSun & 0x00ff);
bSendDoor[32] = (byte)(iCheckSun >> 8);
//txt 发送
string strContent = SerialPortUtil.ByteToHex(bSendDoor);
txtLog.WriteTxt("Door.txt", "Time Send", strContent, false);
byte[] bRece = new byte[34];
int iLength = doorSerial.SendReceByte(bSendDoor, ref bRece, 500);
//txt 接受
if (iLength > 0)
{
strContent = SerialPortUtil.ByteToHex(bRece);
txtLog.WriteTxt("Door.txt", "Time Rece", strContent, true);//01 01 01 0F 11 8C
}
if (iLength == 34)
{
iCheckSun = 0;
for (i = 1; i < 31; i++)
{
iCheckSun += ReceBuff[i];
}
byte bL = (byte)(iCheckSun & 0x00ff);
byte bH = (byte)(iCheckSun >> 8);
if (ReceBuff[0] == 0x7E && bRece[1] == MainControl.bDoorAddrL && bRece[2] == MainControl.bDoorAddrH && ReceBuff[3] == 0x8B && ReceBuff[4] == 0x10 &&
ReceBuff[31] == bL && ReceBuff[32] == bH && ReceBuff[33] == 0x0D)
{
if (frmMain.blDebug)
{
string str = "校时成功";
MessageUtil.ShowTips(str);
}
}
}
}
}