public void GetProperties()
{
ModelObjectEnumerator modelObjectEnum = model.GetModelObjectSelector().GetSelectedObjects();
if (modelObjectEnum.GetSize() == 1)
{
while (modelObjectEnum.MoveNext())
{
if (modelObjectEnum.Current is Tekla.Structures.Model.Beam)
{
Tekla.Structures.Model.Beam beam = (Tekla.Structures.Model.Beam)modelObjectEnum.Current;
TransformationPlane currentTP = new TransformationPlane();
currentTP = model.GetWorkPlaneHandler().GetCurrentTransformationPlane();
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane());
beam.Select();
Assembly assembly = beam.GetAssembly() as Tekla.Structures.Model.Assembly;
assembly.GetReportProperty("ASSEMBLY_POSITION_CODE", ref gridLocation);
partType = beam.GetType().Name;
partID = beam.Identifier.ID.ToString();
beam.GetReportProperty("OWNER", ref owner);
zStart = beam.StartPoint.Z.ToString("F02");
zEnd = beam.EndPoint.Z.ToString("F02");
partPrefix = beam.PartNumber.Prefix;
partStartNo = beam.PartNumber.StartNumber.ToString();
assemblyPrefix = beam.AssemblyNumber.Prefix;
assemblyStartNo = beam.AssemblyNumber.StartNumber.ToString();
Phase CurrentPhase = new Phase();
beam.GetPhase(out CurrentPhase);
phase = CurrentPhase.PhaseNumber.ToString();
name = beam.Name;
profile = beam.Profile.ProfileString;
material = beam.Material.MaterialString;
finish = beam.Finish;
classValue = beam.Class;
if (beam.Position.Plane == Position.PlaneEnum.LEFT)
{
positionOnPlane = PositionPlaneEnum.Left;
}
else if (beam.Position.Plane == Position.PlaneEnum.MIDDLE)
{
positionOnPlane = PositionPlaneEnum.Middle;
}
else if (beam.Position.Plane == Position.PlaneEnum.RIGHT)
{
positionOnPlane = PositionPlaneEnum.Right;
}
positionOnPlaneOffset = beam.Position.PlaneOffset.ToString("F02");
if (beam.Position.Rotation == Position.RotationEnum.BACK)
{
positionRotation = PositionRotationEnum.Back;
}
else if (beam.Position.Rotation == Position.RotationEnum.BELOW)
{
positionRotation = PositionRotationEnum.Below;
}
else if (beam.Position.Rotation == Position.RotationEnum.FRONT)
{
positionRotation = PositionRotationEnum.Front;
}
else if (beam.Position.Rotation == Position.RotationEnum.TOP)
{
positionRotation = PositionRotationEnum.Top;
}
positionRotationOffset = beam.Position.RotationOffset.ToString("F02");
if (beam.Position.Depth == Position.DepthEnum.BEHIND)
{
positionAtDepth = PositionDepthEnum.Behind;
}
else if (beam.Position.Depth == Position.DepthEnum.FRONT)
{
positionAtDepth = PositionDepthEnum.Front;
}
else if (beam.Position.Depth == Position.DepthEnum.MIDDLE)
{
positionAtDepth = PositionDepthEnum.Middle;
}
positionAtDepthOffset = beam.Position.DepthOffset.ToString("F02");
offsetStartPointX = beam.StartPointOffset.Dx.ToString("F02");
offsetStartPointY = beam.StartPointOffset.Dy.ToString("F02");
offsetStartPointZ = beam.StartPointOffset.Dz.ToString("F02");
offsetEndPointX = beam.EndPointOffset.Dx.ToString("F02");
offsetEndPointY = beam.EndPointOffset.Dy.ToString("F02");
offsetEndPointZ = beam.EndPointOffset.Dz.ToString("F02");
beam.GetUserProperty("USER_FIELD_1", ref userfield1);
beam.GetUserProperty("USER_FIELD_2", ref userfield2);
beam.GetUserProperty("USER_FIELD_3", ref userfield3);
beam.GetUserProperty("USER_FIELD_4", ref userfield4);
beam.GetUserProperty("comment", ref notesComments);
beam.GetUserProperty("FIT_NOTES", ref fittingNotes);
beam.GetUserProperty("FIT_NOTES2", ref fittingNotes2);
beam.GetUserProperty("cambering", ref cambering);
beam.GetUserProperty("PAINT", ref paint);
beam.GetUserProperty("PRELIM_MARK", ref preliminaryMark);
beam.GetUserProperty("PAINT_WFT", ref paintWFT);
beam.GetUserProperty("PAINT_DFT", ref paintDFT);
double dblshear1 = 0; beam.GetUserProperty("shear1", ref dblshear1); dblshear1 = dblshear1 * 0.001; shearStart = dblshear1.ToString();
double dblshear2 = 0; beam.GetUserProperty("shear2", ref dblshear2); dblshear2 = dblshear2 * 0.001; shearEnd = dblshear2.ToString();
double dblaxial1 = 0; beam.GetUserProperty("axial1", ref dblaxial1); dblaxial1 = dblaxial1 * 0.001; axialStart = dblaxial1.ToString();
double dblaxial2 = 0; beam.GetUserProperty("axial2", ref dblaxial2); dblaxial2 = dblaxial2 * 0.001; axialEnd = dblaxial2.ToString();
double dblmoment1 = 0; beam.GetUserProperty("moment1", ref dblmoment1); dblmoment1 = dblmoment1 * 0.001; momentStart = dblmoment1.ToString();
double dblmoment2 = 0; beam.GetUserProperty("moment2", ref dblmoment2); dblmoment2 = dblmoment2 * 0.001; momentEnd = dblmoment2.ToString();
beam.GetUserProperty("CONN_CODE_END1", ref connCodeStart);
beam.GetUserProperty("CONN_CODE_END2", ref connCodeEnd);
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(currentTP);
}
}
}
if (modelObjectEnum.GetSize() > 1)
{
partType = "";
partID = "";
owner = "";
gridLocation = "";
partPrefix = "";
partStartNo = "";
assemblyPrefix = "";
assemblyStartNo = "";
phase = "";
name = "";
profile = "";
material = "";
finish = "";
classValue = "";
userfield1 = "";
userfield2 = "";
userfield3 = "";
userfield4 = "";
notesComments = "";
fittingNotes = "";
fittingNotes2 = "";
cambering = "";
paint = "";
preliminaryMark = "";
paintWFT = "";
paintDFT = "";
shearStart = "";
shearEnd = "";
axialStart = "";
axialEnd = "";
momentStart = "";
momentEnd = "";
connCodeStart = "";
connCodeEnd = "";
positionOnPlane = new PositionPlaneEnum();
positionOnPlaneOffset = "";
positionRotation = new PositionRotationEnum();
positionRotationOffset = "";
positionAtDepth = new PositionDepthEnum();
positionAtDepthOffset = "";
offsetStartPointX = "";
offsetStartPointY = "";
offsetStartPointZ = "";
offsetEndPointX = "";
offsetEndPointY = "";
offsetEndPointZ = "";
zStart = "";
zEnd = "";
}
}
