private void btnPickPart_Click(object sender, EventArgs e)
{
// declaration for object user will select
ModelObject pickedObject = null;
// New picker for user interface
TSMUI.Picker picker = new TSMUI.Picker();
try
{
// if user picks an object
pickedObject = picker.PickObject(TSMUI.Picker.PickObjectEnum.PICK_ONE_OBJECT);
}
catch
{
// if user interrupts
pickedObject = null;
MessageBox.Show("No object was selected.");
}
finally
{
if (pickedObject != null)
{
// get coordinate system for object
T3D.CoordinateSystem objectSystem = pickedObject.GetCoordinateSystem();
// set transformation plane to picked object coordinate system
Model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane(objectSystem));
Model.CommitChanges();
}
}
}
private TSG.OBB CreateOrientedBoundingBox(TSM.Part part)
{
TSG.OBB obb = null;
if (part != null)
{
WorkPlaneHandler workPlaneHandler = model.GetWorkPlaneHandler();
TransformationPlane originalTransformationPlane = workPlaneHandler.GetCurrentTransformationPlane();
Solid solid = part.GetSolid();
TSG.Point minPointInCurrentPlane = solid.MinimumPoint;
TSG.Point maxPointInCurrentPlane = solid.MaximumPoint;
TSG.Point centerPoint = CalculateCenterPoint(minPointInCurrentPlane, maxPointInCurrentPlane);
TSG.CoordinateSystem coordSys = part.GetCoordinateSystem();
TransformationPlane localTransformationPlane = new TransformationPlane(coordSys);
workPlaneHandler.SetCurrentTransformationPlane(localTransformationPlane);
solid = part.GetSolid();
TSG.Point minPoint = solid.MinimumPoint;
TSG.Point maxPoint = solid.MaximumPoint;
double extent0 = (maxPoint.X - minPoint.X) / 2;
double extent1 = (maxPoint.Y - minPoint.Y) / 2;
double extent2 = (maxPoint.Z - minPoint.Z) / 2;
workPlaneHandler.SetCurrentTransformationPlane(originalTransformationPlane);
obb = new TSG.OBB(centerPoint, coordSys.AxisX, coordSys.AxisY,
coordSys.AxisX.Cross(coordSys.AxisY), extent0, extent1, extent2);
}
return(obb);
}
private void PasteToTarget(Assembly targetAssembly)
{
_targetCoordsys = targetAssembly.GetMainPart().GetCoordinateSystem();
if (_sourceModelObject is Assembly)
{
if (!_childrenOnly)
{
CopyAssembly(_sourceModelObject as Assembly, targetAssembly);
}
else
{
ArrayList subAssemblies = (_sourceModelObject as Assembly).GetSubAssemblies();
foreach (Assembly subAssembly in subAssemblies)
{
CopyAssembly(subAssembly, targetAssembly);
}
CopyChildren(_sourceModelObject as Assembly, targetAssembly);
}
}
else
{
ModelObject resultObject = CopyObject(_sourceModelObject);
if (resultObject is IAssemblable)
{
targetAssembly.Add(resultObject as IAssemblable);
targetAssembly.Modify();
}
}
}
private static void GetCoordinateSystemAndNameOfSelectedObject(TSM.ModelObjectEnumerator SelectedModelObjects, out TSG.CoordinateSystem ModelObjectCoordSys, out string ModelObjectName)
{
if (SelectedModelObjects.Current is TSM.Part)
{
ModelObjectCoordSys = (SelectedModelObjects.Current as TSM.Part).GetCoordinateSystem();
ModelObjectName = (SelectedModelObjects.Current as TSM.Part).GetPartMark();
}
else if (SelectedModelObjects.Current is TSM.Assembly)
{
ModelObjectCoordSys = (SelectedModelObjects.Current as TSM.Assembly).GetCoordinateSystem();
ModelObjectName = (SelectedModelObjects.Current as TSM.Assembly).AssemblyNumber.Prefix + (SelectedModelObjects.Current as TSM.Assembly).AssemblyNumber.StartNumber;
}
else if (SelectedModelObjects.Current is TSM.BaseComponent)
{
ModelObjectCoordSys = (SelectedModelObjects.Current as TSM.BaseComponent).GetCoordinateSystem();
ModelObjectName = (SelectedModelObjects.Current as TSM.BaseComponent).Name;
}
else if (SelectedModelObjects.Current is TSM.Task)
{
ModelObjectCoordSys = new TSG.CoordinateSystem();
ModelObjectName = (SelectedModelObjects.Current as TSM.Task).Name;
}
else
{
ModelObjectCoordSys = new TSG.CoordinateSystem();
ModelObjectName = string.Empty;
}
}
public void CK06_ByPickPart()
{
ModelObject PickedObject = null;
Picker Picker = new Picker();
try
{
PickedObject = Picker.PickObject(Picker.PickObjectEnum.PICK_ONE_OBJECT);
}
catch { PickedObject = null; }
if (PickedObject != null)
{
T3D.CoordinateSystem ObjectSystem = PickedObject.GetCoordinateSystem();
Model.GetWorkPlaneHandler()
.SetCurrentTransformationPlane(new TransformationPlane(ObjectSystem));
double StartX = 500;
for (int i = 0; i < 7; i++)
{
T3D.Point p1 = new T3D.Point(StartX, 0);
T3D.Point p2 = new T3D.Point(StartX, 0, 1000);
CreateBeam("test Beam", "I30B1_20_93", p1, p2);
StartX += 500;
}
ViewHandler.SetRepresentation("standard"); //PKh> should be add for Tekla-2018
Model.CommitChanges();
}
mw.Msg("Изображение ПСК теперь на стартовой точке - на желтой ручке балки:"
+ " Х по опорной линии, Y вверх. Перпендикулярно балке создано"
+ " 7 дополнительных отрезков другого цвета. [OK]");
MessageBox.Show("вывел ПСК и 7 перпендикулярных дополнительных балок");
mw.Msg();
}
private void button1_Click(object sender, EventArgs e)
{
if (!validarMuroSeleccionado())
{
return;
}
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane());
TransformationPlane currentTP = model.GetWorkPlaneHandler().GetCurrentTransformationPlane();
T3D.CoordinateSystem coordenadasMuro = muro.GetCoordinateSystem();
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TransformationPlane(coordenadasMuro));
ParametrosPanel p = new ParametrosPanel(muro);
p.dx = Double.Parse(this.txtDx.Text);
p.dy = Double.Parse(this.txtDz.Text);
p.adicionalDerecha = Double.Parse(this.txtAddDer.Text);
p.adicionalIzquierda = Double.Parse(this.txtAdIzq.Text);
p.adicionalSuperior = Double.Parse(this.txtAdicionalSup.Text);
p.adicionalInferior = Double.Parse(this.txtAdicionalInf.Text);
p.diametroBarras = 7.0;
p.diametroDiagonal = 4.0;
PanelMoldar panel = new PanelMoldar(p);
panel.fabricar();
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(currentTP);
model.CommitChanges();
}
private void AddView(string Name, TSD.Drawing MyDrawing, ArrayList Parts, TSG.CoordinateSystem coordinateSystem)
{
TSD.View MyView = new TSD.View(MyDrawing.GetSheet(), coordinateSystem, coordinateSystem, Parts);
MyView.Name = Name;
MyView.Insert();
}
private static bool isView2D(TSD.View currentView)
{
T3D.CoordinateSystem disp = currentView.DisplayCoordinateSystem as T3D.CoordinateSystem;
T3D.CoordinateSystem viewp = currentView.ViewCoordinateSystem as T3D.CoordinateSystem;
if (disp.AxisX.Z != viewp.AxisX.Z || disp.AxisY.Z != viewp.AxisY.Z)
{
return(false);
}
return(true);
}
public void CK07_Column()
{
// Create Column after Pick a Point of this column
T3D.Point FirstPoint = null;
Picker Picker = new Picker();
try
{
ArrayList PickedPoints = Picker.PickPoints(Picker.PickPointEnum.PICK_ONE_POINT);
FirstPoint = PickedPoints[0] as T3D.Point;
}
catch { FirstPoint = null; }
if (FirstPoint != null)
{
T3D.Point SecondPoint = new T3D.Point(FirstPoint.X, FirstPoint.Y, FirstPoint.Z + 8000);
Beam ThisBeam = CreateBeam("MyColumn", mw.prfStr, FirstPoint, SecondPoint);
ThisBeam.Finish = "D";
ThisBeam.Class = "7";
ThisBeam.AssemblyNumber.Prefix = "C";
ThisBeam.AssemblyNumber.StartNumber = 1;
ThisBeam.Position.Depth = Position.DepthEnum.MIDDLE;
ThisBeam.Position.Plane = Position.PlaneEnum.MIDDLE;
ThisBeam.Position.Rotation = Position.RotationEnum.TOP;
ThisBeam.Modify();
//ThisBeam.SetUserProperty("USER_FIELD_1", "PEOPLE");
//string UserField = "";
//ThisBeam.GetUserProperty("USER_FIELD_1", ref UserField);
//Solid BeamSolid = ThisBeam.GetSolid();
T3D.CoordinateSystem BeamCoordinateSystem = ThisBeam.GetCoordinateSystem();
Assembly BeamAssembly = ThisBeam.GetAssembly();
ModelObjectEnumerator BeamsBolt = ThisBeam.GetBolts();
ReperShow(BeamCoordinateSystem);
Model.CommitChanges();
Matrix FromColumnSystem = MatrixFactory.FromCoordinateSystem(ThisBeam.GetCoordinateSystem());
T3D.Point FrontFacePoint = FromColumnSystem.Transform(new T3D.Point(50, 50, 500));
GraphicsDrawer Drawer = new GraphicsDrawer();
// Label for Front Face
var label = new Color(0, 0, 0);
Drawer.DrawLineSegment(new LineSegment(FirstPoint, FrontFacePoint), label);
Drawer.DrawText(FrontFacePoint, "THIS IS FRONT FACE", label);
mw.Msg("В выбранной точке создается колонна с осью Х ПСК, направленой вверх."
+ " Профиль колонны как в поле TextBox выше. Черная надпись показывает"
+ " переднюю грань. [ОК]");
MessageBox.Show("Создал колонну и вывел репер, указал переднюю грань");
mw.Msg();
}
}
private void AddRotatedView(string Name, TSD.Drawing MyDraiwng, ArrayList Parts, TSG.CoordinateSystem coordinateSystem)
{
TSG.CoordinateSystem displayCoordinateSystem = new TSG.CoordinateSystem();
TSG.Matrix RotationAroundX = TSG.MatrixFactory.Rotate(20.0 * Math.PI * 2.0 / 360.0, coordinateSystem.AxisX);
TSG.Matrix RotationAroundZ = TSG.MatrixFactory.Rotate(30.0 * Math.PI * 2.0 / 360.0, coordinateSystem.AxisY);
TSG.Matrix Rotation = RotationAroundX * RotationAroundZ;
displayCoordinateSystem.AxisX = new TSG.Vector(Rotation.Transform(new TSG.Point(coordinateSystem.AxisX)));
displayCoordinateSystem.AxisY = new TSG.Vector(Rotation.Transform(new TSG.Point(coordinateSystem.AxisY)));
TSD.View FrontView = new TSD.View(MyDraiwng.GetSheet(), coordinateSystem, displayCoordinateSystem, Parts);
FrontView.Name = Name;
FrontView.Insert();
}
private void CreateViews(TSG.CoordinateSystem ModelObjectCoordSys, string ModelObjectName, TSD.GADrawing MyDrawing, ArrayList Parts)
{
if (createFrontView.Checked)
{
AddView("Front view of " + ModelObjectName, MyDrawing, Parts, GetBasicViewsCoordinateSystemForFrontView(ModelObjectCoordSys));
}
if (createTopView.Checked)
{
AddView("Top view of " + ModelObjectName, MyDrawing, Parts, GetBasicViewsCoordinateSystemForTopView(ModelObjectCoordSys));
}
if (createEndView.Checked)
{
AddView("End view of " + ModelObjectName, MyDrawing, Parts, GetBasicViewsCoordinateSystemForEndView(ModelObjectCoordSys));
}
if (create3dView.Checked)
{
AddRotatedView("3d view of " + ModelObjectName, MyDrawing, Parts, GetBasicViewsCoordinateSystemForFrontView(ModelObjectCoordSys));
}
}
private TSG.CoordinateSystem GetBasicViewsCoordinateSystemForTopView(TSG.CoordinateSystem objectCoordinateSystem)
{
TSG.CoordinateSystem result = new TSG.CoordinateSystem()
{
Origin = new TSG.Point(objectCoordinateSystem.Origin),
AxisX = new TSG.Vector(objectCoordinateSystem.AxisX) * -1.0,
AxisY = new TSG.Vector(objectCoordinateSystem.AxisY)
};
TSG.Vector tempVector = (result.AxisX.Cross(UpDirection));
if (tempVector == new TSG.Vector())
{
tempVector = (objectCoordinateSystem.AxisY.Cross(UpDirection));
}
result.AxisX = tempVector.Cross(UpDirection).GetNormal();
result.AxisY = UpDirection.GetNormal();
return(result);
}
public void AddObjectToClipBoard(Identifier selectedID)
{
_sourceModelObject = _tsModel.SelectModelObject(selectedID);
Assembly fatherAssembly = null;
if (_sourceModelObject is IAssemblable)
{
fatherAssembly = (_sourceModelObject as IAssemblable).GetAssembly();
_sourceCoordsys = fatherAssembly.GetMainPart().GetCoordinateSystem();
}
else if (_sourceModelObject is Assembly)
{
fatherAssembly = _sourceModelObject as Assembly;
_sourceCoordsys = fatherAssembly.GetAssembly().GetMainPart().GetCoordinateSystem();
}
else if (_sourceModelObject is Reinforcement)
{
fatherAssembly = ((_sourceModelObject as Reinforcement).Father as Part).GetAssembly();
_sourceCoordsys = fatherAssembly.GetMainPart().GetCoordinateSystem();
}
_sourceRootAssembly = GetRootAssembly(fatherAssembly);
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
try
{
TSM.Model model = new TSM.Model();
TSD.DrawingHandler drawingHandler = new TSD.DrawingHandler();
TSG.Vector UpDirection = new TSG.Vector(0.0, 0.0, 1.0);
TSD.Size A3 = new TSD.Size(410, 287);
TSM.TransformationPlane current = model.GetWorkPlaneHandler().GetCurrentTransformationPlane();
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new TSM.TransformationPlane());
TSM.ModelObjectEnumerator modelObjectEnum = model.GetModelObjectSelector().GetSelectedObjects();
while (modelObjectEnum.MoveNext())
{
if (modelObjectEnum.Current is Tekla.Structures.Model.Part)
{
TSM.Part selectedPart = (TSM.Part)modelObjectEnum.Current;
string USER_FIELD_3 = "", USER_FIELD_4 = "";
selectedPart.GetUserProperty("USER_FIELD_3", ref USER_FIELD_3);
selectedPart.GetUserProperty("USER_FIELD_4", ref USER_FIELD_4);
USER_FIELD_4 = USER_FIELD_4.Replace("(?)", "");
selectedPart.SetUserProperty("USER_FIELD_4", USER_FIELD_4);
if (USER_FIELD_3 == "M")
{
TSD.Drawing gaDrawing = new TSD.GADrawing("BRAD-Mod-Ass", A3);
gaDrawing.Name = selectedPart.Name;
gaDrawing.Title1 = "SITEWORK";
gaDrawing.Title2 = USER_FIELD_3 + USER_FIELD_4;
gaDrawing.Title3 = "";
gaDrawing.Insert();
drawingHandler.SetActiveDrawing(gaDrawing, false);
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new Tekla.Structures.Model.TransformationPlane(selectedPart.GetCoordinateSystem()));
TSM.Solid tsolid = selectedPart.GetSolid();
TSG.Point tsMinPt = tsolid.MinimumPoint;
TSG.Point tsMaxPt = tsolid.MaximumPoint;
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(new Tekla.Structures.Model.TransformationPlane());
if (selectedPart.Name.Contains("BEAM"))
{
TSG.CoordinateSystem ModelObjectCoordSys = selectedPart.GetCoordinateSystem();
TSG.CoordinateSystem PlanViewCoordSys = new TSG.CoordinateSystem();
PlanViewCoordSys.Origin = new TSG.Point(ModelObjectCoordSys.Origin);
PlanViewCoordSys.AxisX = new TSG.Vector(ModelObjectCoordSys.AxisX) * -1.0;
PlanViewCoordSys.AxisY = new TSG.Vector(ModelObjectCoordSys.AxisY);
TSG.Vector tempVector = (PlanViewCoordSys.AxisX.Cross(UpDirection));
if (tempVector == new TSG.Vector())
{
tempVector = (ModelObjectCoordSys.AxisY.Cross(UpDirection));
}
PlanViewCoordSys.AxisX = tempVector.Cross(UpDirection);
PlanViewCoordSys.AxisY = tempVector;
TSM.Solid solid = selectedPart.GetSolid();
TSG.AABB aabbPlanView = new TSG.AABB();
aabbPlanView.MinPoint = new TSG.Point(-50, tsMinPt.Z - 50, tsMinPt.Y - 50);
aabbPlanView.MaxPoint = new TSG.Point(tsMaxPt.X + 50, tsMaxPt.Z + 50, tsMaxPt.Y + 50);
TSD.View PlanView = new TSD.View(gaDrawing.GetSheet(), PlanViewCoordSys, PlanViewCoordSys, aabbPlanView, "BRAD-Mod-Ass");
PlanView.Name = "TOP";
PlanView.Scale = 10;
PlanView.Attributes.Shortening.CutParts = true;
PlanView.Attributes.Shortening.MinimumLength = 1200;
PlanView.Attributes.Shortening.Offset = 0.5;
PlanView.Insert();
PlanView.Attributes.FixedViewPlacing = true;
PlanView.Origin = new TSG.Point(100, 200);
PlanView.Modify();
TSG.CoordinateSystem FrontViewCoordSys = (TSG.CoordinateSystem)PlanViewCoordSys;
FrontViewCoordSys.AxisX = tempVector.Cross(UpDirection).GetNormal();
FrontViewCoordSys.AxisY = UpDirection.GetNormal();
TSG.AABB aabbFrontView = new TSG.AABB();
aabbFrontView.MinPoint = new TSG.Point(-50, tsMinPt.Y - 50, tsMinPt.Z - 50);
aabbFrontView.MaxPoint = new TSG.Point(tsMaxPt.X + 50, tsMaxPt.Y + 50, tsMaxPt.Z + 50);
TSD.View FrontView = new TSD.View(gaDrawing.GetSheet(), FrontViewCoordSys, FrontViewCoordSys, aabbFrontView, "BRAD-Mod-Ass");
FrontView.Name = "FRONT";
FrontView.Scale = 10;
FrontView.Attributes.Shortening.CutParts = true;
FrontView.Attributes.Shortening.MinimumLength = 1200;
FrontView.Attributes.Shortening.Offset = 0.5;
FrontView.Insert();
FrontView.Attributes.FixedViewPlacing = true;
FrontView.Origin = new TSG.Point(100, (200 - FrontView.Height - 2));
FrontView.Modify();
}
if (selectedPart.Name.Contains("COLUMN"))
{
TSG.CoordinateSystem ModelObjectCoordSys = selectedPart.GetCoordinateSystem();
TSG.CoordinateSystem PlanViewCoordSys = new TSG.CoordinateSystem();
PlanViewCoordSys.Origin = new TSG.Point(ModelObjectCoordSys.Origin);
PlanViewCoordSys.AxisX = new TSG.Vector(ModelObjectCoordSys.AxisX);
PlanViewCoordSys.AxisY = new TSG.Vector(ModelObjectCoordSys.AxisY);
TSG.Vector tempVector = (PlanViewCoordSys.AxisX.Cross(UpDirection));
if (tempVector == new TSG.Vector())
{
tempVector = (ModelObjectCoordSys.AxisY.Cross(UpDirection));
}
TSG.AABB aabbPlanView = new TSG.AABB();
aabbPlanView.MinPoint = new TSG.Point(-50, tsMinPt.Y - 50, tsMinPt.Z - 50);
aabbPlanView.MaxPoint = new TSG.Point(tsMaxPt.X + 50, tsMaxPt.Y + 50, tsMaxPt.Z + 50);
TSD.View PlanView = new TSD.View(gaDrawing.GetSheet(), PlanViewCoordSys, PlanViewCoordSys, aabbPlanView, "BRAD-Mod-Ass");
PlanView.Name = "TOP";
PlanView.Scale = 10;
PlanView.Attributes.Shortening.CutParts = true;
PlanView.Attributes.Shortening.MinimumLength = 1200;
PlanView.Attributes.Shortening.Offset = 0.5;
PlanView.Origin = new TSG.Point(100, 200);
PlanView.Insert();
PlanView.Attributes.FixedViewPlacing = true;
PlanView.Modify();
TSG.CoordinateSystem FrontViewCoordSys = (TSG.CoordinateSystem)PlanViewCoordSys;
FrontViewCoordSys.AxisY = new TSG.Vector(ModelObjectCoordSys.AxisY).Cross(UpDirection) * -1;
TSG.AABB aabbFrontView = new TSG.AABB();
aabbFrontView.MinPoint = new TSG.Point(-50, tsMinPt.Z - 50, tsMinPt.Y - 50);
aabbFrontView.MaxPoint = new TSG.Point(tsMaxPt.X + 50, tsMaxPt.Z + 50, tsMaxPt.Y + 50);
TSD.View FrontView = new TSD.View(gaDrawing.GetSheet(), FrontViewCoordSys, FrontViewCoordSys, aabbFrontView, "BRAD-Mod-Ass");
FrontView.Name = "FRONT";
FrontView.Scale = 10;
FrontView.Attributes.Shortening.CutParts = true;
FrontView.Attributes.Shortening.MinimumLength = 1200;
FrontView.Attributes.Shortening.Offset = 0.5;
FrontView.Origin = new TSG.Point(100, (200 - FrontView.Height - 30));
FrontView.Insert();
FrontView.Attributes.FixedViewPlacing = true;
FrontView.Modify();
}
drawingHandler.CloseActiveDrawing(true);
}
}
}
MessageBox.Show("Drawings Created");
model.GetWorkPlaneHandler().SetCurrentTransformationPlane(current);
}
catch { }
}
public void AddChildrenToClipBoard(Identifier selectedID)
{
_sourceModelObject = _tsModel.SelectModelObject(selectedID);
_sourceCoordsys = _sourceModelObject.GetCoordinateSystem();
_childrenOnly = true;
}
private void btnConvert_Click(object sender, EventArgs e)
{
ModelObjectSelector mos = new ModelObjectSelector();
TSM.ModelObjectEnumerator moe = mos.GetSelectedObjects();
moe.SelectInstances = false;
while (moe.MoveNext())
{
if (moe.Current is TSM.Part)
{
TSM.Part part = moe.Current as TSM.Part;
// this method needs to be called to properly fill all the properties of the part
part.Select();
double partLength = 0.0;
double partHeight = 0.0;
double partWidth = 0.0;
part.GetReportProperty("LENGTH", ref partLength);
part.GetReportProperty("HEIGHT", ref partHeight);
part.GetReportProperty("WIDTH", ref partWidth);
TSM.ModelObjectEnumerator MyAllBooleans = part.GetBooleans();
TSM.ModelObjectEnumerator MyAllBolts = part.GetBolts();
TSM.ModelObject MyFather = part.GetFatherComponent();
TSG.CoordinateSystem coordinateSystem = part.GetCoordinateSystem();
TSM.WorkPlaneHandler planeHandler = model.GetWorkPlaneHandler();
// before we create a new plane we need to store the old one
TSM.TransformationPlane original = planeHandler.GetCurrentTransformationPlane();
TSM.TransformationPlane partPlane = new TSM.TransformationPlane(coordinateSystem);
planeHandler.SetCurrentTransformationPlane(partPlane);
//this.DrawCoordinateSystem();
TSG.Point p1 = new TSG.Point(0, partHeight / 2, 0);
TSG.Point p2 = new TSG.Point(partLength, partHeight / 2, 0);
TSG.Point p3 = new TSG.Point(partLength, -partHeight / 2, 0);
TSG.Point p4 = new TSG.Point(0, -partHeight / 2, 0);
TSM.ContourPlate CP = new TSM.ContourPlate();
TSM.ContourPoint conturePoint1 = new TSM.ContourPoint(p1, null);
TSM.ContourPoint conturePoint2 = new TSM.ContourPoint(p2, null);
TSM.ContourPoint conturePoint3 = new TSM.ContourPoint(p3, null);
TSM.ContourPoint conturePoint4 = new TSM.ContourPoint(p4, null);
CP.AddContourPoint(conturePoint1);
CP.AddContourPoint(conturePoint2);
CP.AddContourPoint(conturePoint3);
CP.AddContourPoint(conturePoint4);
CP.Name = "NEM";
CP.Finish = "xxx";
CP.Profile.ProfileString = "PL" + partWidth;
CP.Material.MaterialString = "S235";
CP.Class = "1";
CP.Insert();
while (MyAllBooleans.MoveNext())
{
try
{
TSM.BooleanPart partBooleans = MyAllBooleans.Current as TSM.BooleanPart;
TSM.Part partBool = partBooleans.OperativePart as TSM.Part;
partBool.Class = TSM.BooleanPart.BooleanOperativeClassName;
partBool.Insert();
TSM.BooleanPart myboolpart = new TSM.BooleanPart();
myboolpart.Father = CP;
myboolpart.SetOperativePart(partBool);
myboolpart.Insert();
partBool.Delete();
}
catch (Exception)
{
throw;
}
}
while (MyAllBolts.MoveNext())
{
try
{
if (MyAllBolts.Current is TSM.BoltGroup)
{
TSM.BoltGroup b = MyAllBolts.Current as TSM.BoltGroup;
TSM.Part toBolted = b.PartToBeBolted as TSM.Part;
TSM.Part toBolt = b.PartToBoltTo as TSM.Part;
if (toBolted.Identifier.ID == toBolt.Identifier.ID)
{
b.PartToBeBolted = CP;
b.PartToBoltTo = CP;
}
else if (toBolted.Identifier.ID == part.Identifier.ID)
{
b.PartToBoltTo.GetBolts();
b.PartToBeBolted = CP;
}
else
{
b.PartToBoltTo = CP;
b.PartToBeBolted.GetBolts();
}
b.Insert();
}
}
catch (Exception)
{
throw;
}
}
if (MyFather != null)
{
TSM.ModelObjectEnumerator elementOfComponenet = MyFather.GetChildren();
while (elementOfComponenet.MoveNext())
{
TSM.Part element = elementOfComponenet.Current as TSM.Part;
try
{
if (element is TSM.Part)
{
if (element.Identifier.ID == part.Identifier.ID)
{
element = CP;
element.Modify();
}
else
{
continue;
}
}
else
{
continue;
}
}
catch (Exception)
{
throw;
}
}
}
part.Delete();
planeHandler.SetCurrentTransformationPlane(original);
}
}
this.model.CommitChanges();
}
public static void pcor(T3D.CoordinateSystem pc, string txt)
{
pvector(pc.AxisX, txt + " Axis X");
pvector(pc.AxisY, txt + " Axis Y");
ppoint(pc.Origin, txt + " Origin");
}
public void CK07_Beam()
{
string prf = mw.prfStr;
// Create Beam after Pick 2 Points - StartPoint and EndPoint of Beam
T3D.Point FirstPoint = null, SecondPoint = null;
Picker Picker = new Picker();
try
{
ArrayList PickedPoints = Picker.PickPoints(Picker.PickPointEnum.PICK_TWO_POINTS);
FirstPoint = PickedPoints[0] as T3D.Point;
SecondPoint = PickedPoints[1] as T3D.Point;
}
catch { FirstPoint = SecondPoint = null; }
if (FirstPoint != null && SecondPoint != null)
{
Beam ThisBeam = CreateBeam("MyBeam", prf, FirstPoint, SecondPoint);
ThisBeam.Finish = "GALVANIZED";
ThisBeam.Class = "4";
ThisBeam.AssemblyNumber.Prefix = "B";
ThisBeam.AssemblyNumber.StartNumber = 1;
ThisBeam.Position.Depth = Position.DepthEnum.BEHIND;
ThisBeam.Position.Plane = Position.PlaneEnum.MIDDLE;
ThisBeam.Position.Rotation = Position.RotationEnum.TOP;
ThisBeam.Modify();
ThisBeam.SetUserProperty("USER_FIELD_1", "PEOPLE");
string UserField = "";
ThisBeam.GetUserProperty("USER_FIELD_1", ref UserField);
Solid BeamSolid = ThisBeam.GetSolid();
T3D.CoordinateSystem BeamCoordinateSystem = ThisBeam.GetCoordinateSystem();
Assembly BeamAssembly = ThisBeam.GetAssembly();
ModelObjectEnumerator BeamsBolt = ThisBeam.GetBolts();
ReperShow(BeamCoordinateSystem);
Model.CommitChanges();
mw.Msg("Балка и репер выводится в точке 1 с осью Х по направлению к фиолетовой точке"
+ " (ручке конца балки) - точке 2. Профиль как в поле TextBox выше. [ОК]");
MessageBox.Show("Создал балку по 2 точкам и вывел репер");
mw.Msg();
string ReportProfile = "—200*20";
ThisBeam.Class = "2";
ThisBeam.Profile.ProfileString = ReportProfile;
ThisBeam.Modify();
double Height = 0;
ThisBeam.GetReportProperty("HEIGHT", ref Height);
ThisBeam.GetReportProperty("PROFILE", ref ReportProfile);
Model.CommitChanges();
mw.Msg("Профиль балки изменяется на красную пластину -200x20 [OK]");
MessageBox.Show("Beam Modified - PL");
ThisBeam.Delete();
Model.CommitChanges();
mw.Msg("После всех предыдущих манипуляций, балка стерта. [ОК]");
MessageBox.Show("Beam DELETED");
mw.Msg();
}
Model.GetWorkPlaneHandler()
.SetCurrentTransformationPlane(new TransformationPlane());
ViewHandler.SetRepresentation("standard"); //PKh> should be add for Tekla-2018
Model.CommitChanges();
}
private void btn_multiBeams_Click(object sender, EventArgs e)
{
try
{
Picker picker = new Picker();
ArrayList points = picker.PickPoints(Picker.PickPointEnum.PICK_POLYGON);
if (points.Count >= 3)
{
TSG.Point start = new TSG.Point(0, 0, 0);
TSG.Point middle = new TSG.Point(0, 0, 0);
TSG.Point end = new TSG.Point(0, 0, 0);
TSG.Vector vectorFit = new TSG.Vector();
TSG.Vector vectorZ = new TSG.Vector();
TSG.Vector vectorOne = new TSG.Vector();
TSG.Vector vectorTwo = new TSG.Vector();
ArrayList listBeams = new ArrayList();
ArrayList listPlates = new ArrayList();
double angelDegree = 0.0;
for (int i = 0; i < points.Count - 1; i++)
{
TSM.Beam beam = BeamFirst(points[i] as TSG.Point, points[i + 1] as TSG.Point);
beam.Insert();
listBeams.Add(beam);
this.model.CommitChanges();
}
double primaryWidth = 0.0;
double primaryHeight = 0.0;
for (int i = 0; i < points.Count - 1; i++)
{
try
{
start = points[i] as TSG.Point;
middle = points[i + 1] as TSG.Point;
end = points[i + 2] as TSG.Point;
}
catch
{
}
vectorOne = new TSG.Vector(middle.X - start.X, middle.Y - start.Y, middle.Z - start.Z);
vectorOne.Normalize();
vectorTwo = new TSG.Vector(middle.X - end.X, middle.Y - end.Y, middle.Z - end.Z);
vectorTwo.Normalize();
double angle = vectorOne.GetAngleBetween(vectorTwo);
angelDegree = angle * 180 / Math.PI;
//TSG.Vector vectorFit = new TSG.Vector(1 * Math.Cos(angle / 2), 1 * Math.Cos(angle / 2), 0);
vectorFit = new TSG.Vector(vectorOne.X + vectorTwo.X, vectorOne.Y + vectorTwo.Y, vectorOne.Z + vectorTwo.Z);
vectorZ = vectorOne.Cross(vectorTwo);
TSG.CoordinateSystem coordinateSystem = new TSG.CoordinateSystem();
double thick;
if (tb_thcikPlates.Text != string.Empty)
{
double.TryParse(tb_thcikPlates.Text, out thick);
}
else
{
thick = 20.0;
}
double offset = thick;
double angleFD = 90 - (angelDegree / 2);
double angleFR = Math.PI * angleFD / 180;
double width = 0.0;
double heigth = 0.0;
double x = Math.Round(vectorFit.X, 2, MidpointRounding.ToEven);
double y = Math.Round(vectorFit.Y, 2, MidpointRounding.ToEven);
double z = Math.Round(vectorFit.Z, 2, MidpointRounding.ToEven);
TSM.Beam beam1 = listBeams[i] as TSM.Beam;
TSM.Beam beam2 = listBeams[i + 1] as TSM.Beam;
beam1.GetReportProperty("WIDTH", ref primaryWidth);
beam1.GetReportProperty("HEIGHT", ref primaryHeight);
if (x == 0.0 && y == 0.0 && z == 0.0)
{
TSG.Vector bAxisX = beam1.GetCoordinateSystem().AxisX;
TSG.Vector bAxisY = beam1.GetCoordinateSystem().AxisY;
TSG.Vector bAxisZ = bAxisY.Cross(bAxisX);
coordinateSystem = new TSG.CoordinateSystem(middle, bAxisZ, bAxisY);
}
else
{
coordinateSystem = new TSG.CoordinateSystem(
middle, vectorFit, vectorZ);
}
TSM.WorkPlaneHandler planeHandler = model.GetWorkPlaneHandler();
TSM.TransformationPlane original = planeHandler.GetCurrentTransformationPlane();
TSM.TransformationPlane beamPlane = new TSM.TransformationPlane(coordinateSystem);
planeHandler.SetCurrentTransformationPlane(beamPlane);
FitBeam(beam1, -offset);
FitBeam(beam2, offset);
if (z != 0)
{
vectorZ = vectorTwo.Cross(vectorOne);
planeHandler.SetCurrentTransformationPlane(original);
TSG.CoordinateSystem coordinatePlate = new TSG.CoordinateSystem(
middle, vectorZ, vectorFit);
TSM.TransformationPlane beamPlate = new TSM.TransformationPlane(coordinatePlate);
planeHandler.SetCurrentTransformationPlane(beamPlate);
width = primaryWidth;
heigth = 50 + primaryHeight / (Math.Cos(angleFR));
}
else
{
width = 50 + primaryWidth / (Math.Cos(angleFR));
heigth = primaryHeight;
}
bool positionPlate = true;
for (int k = 0; k < 2; k++)
{
TSM.ContourPlate plate = PlateFirst(width, heigth, offset);
if (positionPlate)
{
plate.Position.Depth = TSM.Position.DepthEnum.BEHIND;
positionPlate = false;
}
else
{
plate.Position.Depth = TSM.Position.DepthEnum.FRONT;
}
plate.Insert();
listPlates.Add(plate);
}
TSM.ContourPlate plate1 = listPlates[0] as TSM.ContourPlate;
TSM.ContourPlate plate2 = listPlates[1] as TSM.ContourPlate;
BoltPlatetoPlate(plate1, plate2, heigth, width);
WeldBeamToPlate(beam1, plate1);
WeldBeamToPlate(beam2, plate2);
planeHandler.SetCurrentTransformationPlane(original);
this.model.CommitChanges();
listPlates.Clear();
}
this.model.CommitChanges();
listBeams.Clear();
}
else
{
MessageBox.Show(Tekla.Structures.Dialog.UIControls.LocalizeForm.Localization.GetText("albl_Invalid_input_parts"));//translation of text in message box
}
}
catch
{
}
}