public CrossPoint(bool existTopLine, bool existLeftLine, int index, int rowIndex, int columnIndex, int x, int y, CellLine horizontal, CellLine vertical)
{
ExistTopLine = existTopLine;
ExistLeftLine = existLeftLine;
Index = index;
RowIndex = rowIndex;
ColumnIndex = columnIndex;
X = x;
Y = y;
Horizontal = horizontal;
Vertical = vertical;
}
static CellLines GetVerticalAllInBox(CellLine top, CellLine bottom, CellLine left, CellLine right, CellLines verticals, int lineDistance, ref Dictionary <int, int> duplicateDic)
{
CellLines verticalsAll = new CellLines();
foreach (CellLine line in verticals)
{
if (!duplicateDic.ContainsKey(line.Index) &&
line.StartX >= left.StartX &&
line.EndX <= right.EndX &&
line.StartY >= top.StartY - lineDistance &&
line.EndY <= bottom.StartY + lineDistance)
{
verticalsAll.Add(line);
}
}
return(verticalsAll);
}
static bool ExistBottomLine(int topIndex, CellLine verticalLeft, CellLine verticalRight, CellLines horizontals, int lineDistance, ref Dictionary <int, int> duplicateDic, out CellLine bottom)
{
bottom = new CellLine();
foreach (CellLine horizontal in horizontals)
{
if (!duplicateDic.ContainsKey(horizontal.Index) && horizontal.Index != topIndex)
{
// 두 수직선과 끝점이 만나야 함
if (Math.Abs(horizontal.StartX - verticalLeft.StartX) <= lineDistance &&
Math.Abs(horizontal.EndX - verticalRight.EndX) <= lineDistance &&
Math.Abs(horizontal.StartY - verticalLeft.EndY) <= lineDistance &&
Math.Abs(horizontal.EndY - verticalRight.EndY) <= lineDistance)
{
bottom = horizontal;
return(true);
}
}
}
return(false);
}
static void RemoveNoiseLine(CellLine top, CellLine bottom, CellLine left, CellLine right, CellLines innerHorizontals, CellLines innerVerticals, int lineDistance, ref Dictionary <int, int> duplicateDic, out CellLines horizontalsFinal, out CellLines verticalsFinal)
{
// 최종적으로 찾은 것을 duplicateDic에 추가한다. (이렇게 하면 박스 안의 박스는 별도로 처리 가능)
horizontalsFinal = new CellLines();
verticalsFinal = new CellLines();
CellLines horizontals = new CellLines();
CellLines verticals = new CellLines();
CellLines horizontalFirst = new CellLines();
CellLines verticalFirst = new CellLines();
// 일단 가장 외각선과 맞닿는 부분이 있는 라인만 인정한다.
foreach (CellLine line in innerHorizontals)
{
if (Math.Abs(line.StartX - left.StartX) <= lineDistance || Math.Abs(line.EndX - right.EndX) <= lineDistance)
{
horizontals.Add(line);
}
else
{
horizontalFirst.Add(line);
}
}
// 일단 가장 외각선과 맞닿는 부분이 있는 라인만 인정한다.
foreach (CellLine line in innerVerticals)
{
if (Math.Abs(line.StartY - top.StartY) <= lineDistance || Math.Abs(line.EndY - bottom.EndY) <= lineDistance)
{
verticals.Add(line);
}
else
{
verticalFirst.Add(line);
}
}
// 가장 외각선과 맞닿는 부분이 있는 라인과 맞닿은 라인은 인정한다.
// Data Sheet 같이 복잡한 테이블을 처리하기 위해 4번 돌린다.
CellLines horizontalSecond, verticalSecond, horizontalThird, verticalThird, horizontalFourth, verticalFourth;
GetInsideLine(horizontalSamples: horizontalFirst, verticalSamples: verticalFirst, lineDistance: lineDistance, horizontals: ref horizontals, verticals: ref verticals, horizontalRests: out horizontalSecond, verticalRests: out verticalSecond);
GetInsideLine(horizontalSamples: horizontalSecond, verticalSamples: verticalSecond, lineDistance: lineDistance, horizontals: ref horizontals, verticals: ref verticals, horizontalRests: out horizontalThird, verticalRests: out verticalThird);
GetInsideLine(horizontalSamples: horizontalThird, verticalSamples: verticalThird, lineDistance: lineDistance, horizontals: ref horizontals, verticals: ref verticals, horizontalRests: out horizontalFourth, verticalRests: out verticalFourth);
bool matchStart, matchEnd;
// top, bottom을 수평선에 추가한다.
horizontals.Add(top);
horizontals.Add(bottom);
// left, right를 수직선에 추가한다.
verticals.Add(left);
verticals.Add(right);
// 양 끝점이 모두 vertical과 붙어 있어야 line으로 인정한다. Data Sheet의 경우 단순 밑줄이 마치 Line처럼 잡힘
foreach (CellLine horizontal in horizontals)
{
matchStart = false;
matchEnd = false;
foreach (CellLine vertical in verticals)
{
if (horizontal.StartY >= vertical.StartY && horizontal.EndY <= vertical.EndY)
{
if (Math.Abs(horizontal.StartX - vertical.StartX) <= lineDistance)
{
matchStart = true;
}
else if (Math.Abs(horizontal.EndX - vertical.EndX) <= lineDistance)
{
matchEnd = true;
}
}
if (matchStart && matchEnd)
{
horizontalsFinal.Add(horizontal);
// top, bottom이 추가 되었기 때문에 체크
if (!duplicateDic.ContainsKey(horizontal.Index))
{
duplicateDic.Add(horizontal.Index, horizontal.Index);
}
break;
}
}
}
// 양 끝점이 모두 horizontal과 붙어 있어야 line으로 인정한다. Data Sheet의 경우 단순 밑줄이 마치 Line처럼 잡힘
foreach (CellLine vertical in verticals)
{
matchStart = false;
matchEnd = false;
foreach (CellLine horizontal in horizontals)
{
if (vertical.StartX >= horizontal.StartX && vertical.EndX <= horizontal.EndX)
{
if (Math.Abs(vertical.StartY - horizontal.StartY) <= lineDistance)
{
matchStart = true;
}
else if (Math.Abs(vertical.EndY - horizontal.EndY) <= lineDistance)
{
matchEnd = true;
}
}
if (matchStart && matchEnd)
{
verticalsFinal.Add(vertical);
// left, right가 추가 되었기 때문에 체크
if (!duplicateDic.ContainsKey(vertical.Index))
{
duplicateDic.Add(vertical.Index, vertical.Index);
}
break;
}
}
}
}
static CellBoxes DetectCellBoxes(int lineDistance, ref CellLines horizontals, ref CellLines verticals)
{
CellBoxes cellBoxes = new CellBoxes();
CellLines horizontalsFinal, verticalsFinal;
CellLine left = new CellLine();
CellLine right = new CellLine();
CellLine top, bottom;
bool findLeft, findRight;
int index = 0;
Dictionary <int, int> duplicateDic = new Dictionary <int, int>();
// 위에서부터 아래로 찾는다.
foreach (CellLine horizontal in horizontals)
{
if (!duplicateDic.ContainsKey(horizontal.Index))
{
findLeft = findRight = false;
foreach (CellLine vertical in verticals)
{
if (!duplicateDic.ContainsKey(vertical.Index))
{
if (horizontal.MinX <= vertical.MaxX && horizontal.MaxX >= vertical.MinX && horizontal.MinY <= vertical.MaxY && horizontal.MaxY >= vertical.MinY)
{
// 현재 라인의 왼쪽과 같은 위치에서 시작되는 수직 라인을 찾는다.
if (Math.Abs(horizontal.StartX - vertical.StartX) <= lineDistance)
{
findLeft = true;
left = vertical;
}
// 현재 라인의 오른쪽과 같은 위치에서 시작되는 수직 라인을 찾는다.
else if (Math.Abs(horizontal.EndX - vertical.StartX) <= lineDistance)
{
findRight = true;
right = vertical;
}
}
// 두 라인을 찾으면
if (findLeft && findRight)
{
// 두 라인을 이용해서 두 수직 라인의 하단과 이어지는 수평 라인을 찾는다.
if (ExistBottomLine(topIndex: horizontal.Index, lineDistance: lineDistance, verticalLeft: left, verticalRight: right, horizontals: horizontals, duplicateDic: ref duplicateDic, bottom: out bottom))
{
top = horizontal;
duplicateDic.Add(top.Index, top.Index);
duplicateDic.Add(bottom.Index, bottom.Index);
duplicateDic.Add(left.Index, left.Index);
duplicateDic.Add(right.Index, right.Index);
horizontals = GetHorizonsAllInBox(lineDistance: lineDistance, top: top, bottom: bottom, left: left, right: right, horizontals: horizontals, duplicateDic: ref duplicateDic);
verticals = GetVerticalAllInBox(lineDistance: lineDistance, top: top, bottom: bottom, left: left, right: right, verticals: verticals, duplicateDic: ref duplicateDic);
RemoveNoiseLine(lineDistance: lineDistance, top: top, bottom: bottom, left: left, right: right, innerHorizontals: horizontals, innerVerticals: verticals, duplicateDic: ref duplicateDic, horizontalsFinal: out horizontalsFinal, verticalsFinal: out verticalsFinal);
cellBoxes.Add(new CellBox(index: index++, horizontals: new CellLines(horizontalsFinal.OrderBy(line => line.StartY)), verticals: new CellLines(verticalsFinal.OrderBy(line => line.StartX))));
break;
}
}
}
}
}
}
return(cellBoxes);
}
