Example #1
0
 private void QRbutton_Click(object sender, EventArgs e)
 {
     if (changeGDdelegate != null)
     {
         int index = GDdataGridView.CurrentRow.Index;
         changeGDdelegate(RwList[index], SBHID);
         this.Close();
         return;
     }
     if (GDdataGridView.SelectedRows.Count == 1)
     {
         int      index = GDdataGridView.CurrentRow.Index;
         frmTL2_1 form  = new frmTL2_1(RwList[index], SBHID, RigthType);
         push(form, this);
     }
     else
     {
         int index = GDdataGridView.CurrentCell.RowIndex;
         if (index >= 0)
         {
             index = GDdataGridView.CurrentCell.RowIndex;
             frmTL2_1 form = new frmTL2_1(RwList[index], SBHID, RigthType);
             push(form, this);
         }
         else
         {
             //MessageBox.Show("切换工单必须选择一行", "消息框");
             ShowMeg(q(Msg_Type.msggdchocierow));
         }
     }
 }
Example #2
0
        private void button1_Click(object sender, EventArgs e)
        {
            if (string.IsNullOrEmpty(GZZXcomboBox.Text))
            {
                MessageBox.Show("工作中心不能为空!!!", "消息框");
                return;
            }
            if (string.IsNullOrEmpty(SBcomboBox.Text))
            {
                MessageBox.Show("设备号不能为空!!!", "消息框");
                return;
            }
            MES_PD_SCRW model = new MES_PD_SCRW();

            model.SBBH = Convert.ToString(SBcomboBox.SelectedValue);
            SBHID      = model.SBBH;
            SELECT_MES_PD_SCRW Smodel = ServicModel.PD_SCRW.SELECT(model, getToken());

            if (Smodel.MES_RETURN.TYPE == "E")
            {
                MessageBox.Show(Smodel.MES_RETURN.MESSAGE, "消息框");
                return;
            }

            if (Smodel.MES_PD_SCRW_LIST.Length == 0)
            {
                MessageBox.Show("找不到工作中心是" + GZZXcomboBox.Text + "设备号是" + SBcomboBox.Text + "对应的派单任务!!!", "消息框");
                return;
            }
            else if (Smodel.MES_PD_SCRW_LIST.Length == 1)
            {
                frmTL2_1 form = new frmTL2_1(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);
                push(form, this);
            }
            else if (Smodel.MES_PD_SCRW_LIST.Length > 1)
            {
                frmChange_GD form = new frmChange_GD(Smodel.MES_PD_SCRW_LIST, model.SBBH, RigthType);
                show(form);
                this.Close();
            }
        }
Example #3
0
        public void RWDSCAN(MES_PD_SCRW_LIST rw, int rigthID, string gc, string gzzx, int wllb, Form form1, string tmText)
        {
            form1.Close();
            form1.Hide();
            if (string.IsNullOrEmpty(gc))
            {
                bool isValid = true;
                if (rigthID == 0)
                {
                    isValid = false;
                }
                else
                {
                    RigthType = (Rigth_Type)rigthID;
                    if (RigthType == Rigth_Type.fujitl)
                    {
                        //frmFujiTL fjtlform = new frmFujiTL(Smodel.MES_PD_SCRW_LIST, sbList[0].SBMS, sbList[0].SBBH);

                        //push(fjtlform);
                    }
                    else if (RigthType == Rigth_Type.gangketl_cc || RigthType == Rigth_Type.jidiantitl_cc || RigthType == Rigth_Type.mfqqingxi || RigthType == Rigth_Type.gmgtl_cc || RigthType == Rigth_Type.fujifengkoujitl_cc || RigthType == Rigth_Type.zhengjifengkoujitl_cc)
                    {
                        //frmTL2  form = new frmTL2(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);
                        //push(form);
                        frmTL2_1 form = new frmTL2_1(rw, rw.SBBH, RigthType);
                        push(form, this);
                    }
                    else if (RigthType == Rigth_Type.ddjtl_cc)
                    {
                        frmTL2_2 form = new frmTL2_2(rw, rw.SBBH, RigthType);
                        push(form, this);
                    }
                    else if (RigthType == Rigth_Type.zhuxiancc)
                    {
                        frmZX_CC form = new frmZX_CC(rw, rw.SBBH, RigthType);
                        push(form, this);
                    }
                    else if (RigthType == Rigth_Type.baobiaocc || RigthType == Rigth_Type.dczztl_cc)
                    {
                        //frmBaobiao form = new frmBaobiao(rw, rw.SBBH, RigthType, rw.SBH,tmText);
                        frmBaobiao form = new frmBaobiao(rw, rw.SBBH, RigthType, rw.SBH);
                        push(form, this);
                    }
                    else if (RigthType == Rigth_Type.baozhuangcc)
                    {
                        frmBaozhuang form = new frmBaozhuang(new MES_PD_SCRW_LIST(), rw.SBBH, RigthType, rw.SBH);
                        push(form, this);
                    }
                    else if (RigthType == Rigth_Type.zhuxiantl || RigthType == Rigth_Type.zhujizhengjitl)
                    {
                        frmZX_TL form = new frmZX_TL(rw, rw.SBBH, RigthType);;
                        push(form, this);
                    }
                }

                if (isValid)
                {
                }
                else
                {
                    ShowMeg(q(Msg_Type.rwdexcept));//"获取任务单信息异常,请联系管理员"
                }
            }
            else
            {
                //扫描工单string gc,string gzzx,int wllb
                MES_SY_GZZX_SBH model = new MES_SY_GZZX_SBH();
                model.GZZXBH = gzzx;
                model.GC     = gc;
                model.WLLB   = wllb;
                MES_SY_GZZX_SBH[] list = ServicModel.SY_GZZX_SBH.SELECT(model, getToken());

                if (rigthID != 0)
                {
                    RigthType = (Rigth_Type)rigthID;
                    if (list.Length != 0)
                    {
                        frmFindSBH form = new frmFindSBH(list, gzzx, RigthType, tmText);
                        push(form, this);
                    }
                    else
                    {
                        ShowMeg(gzzx + q(Msg_Type.sbhempty));//对应的设备号为空
                    }
                }
                else
                {
                    ShowMeg(q(Msg_Type.rolegdexcept));//工单对应的权限异常,请联系管理员
                }
            }
        }
Example #4
0
        public void ScanTM()
        {
            if (smtextBox1.Text.Trim().Length != 10)
            {
                ShowMeg(q(Msg_Type.msgnosbh));//"扫描的不是设备号条码"
                return;
            }
            MES_SY_GZZX_SBH sbhmodel = new MES_SY_GZZX_SBH();

            sbhmodel.SBBH = smtextBox1.Text.Trim();
            MES_SY_GZZX_SBH[] sbList = ServicModel.SY_GZZX_SBH.SELECT(sbhmodel, getToken());
            if (sbList.Length == 1)
            {
                bool isGZZX_SB = false;
                for (int i = 0; i < Sbhlist.Length; i++)
                {
                    if (sbList[0].SBBH == Sbhlist[i].SBBH)
                    {
                        isGZZX_SB = true;
                        break;
                    }
                }
                if (isGZZX_SB)
                {
                    MES_PD_SCRW model = new MES_PD_SCRW();
                    model.SBBH = sbList[0].SBBH;
                    model.ZPRQ = GetSystemDate(Date_Type.hour, 0, "yyyy-MM-dd");// DateTime.Now.ToString("yyyy-MM-dd");
                    //model.GC = getGC("value");
                    //model.GZZXBH = getUserInfo("gzzxvalue");
                    SBHID = model.SBBH;

                    SELECT_MES_PD_SCRW Smodel;//SELEXT_LAST只查询最后一个任务,SELECT查询的是所有当天的任务.暂时只有负极和主线
                    switch (RigthType)
                    {
                    case Rigth_Type.gangketl_cc:
                        Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());

                        break;

                    case Rigth_Type.jidiantitl_cc:
                        Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                        break;

                    case Rigth_Type.fujitl:
                        Smodel = ServicModel.PD_SCRW.SELECT(model, getToken());
                        break;

                    case Rigth_Type.fujicc:
                        Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                        break;

                    case Rigth_Type.zhengjicc:
                        Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                        break;

                    case Rigth_Type.zhuxiantl:
                        Smodel = ServicModel.PD_SCRW.SELECT(model, getToken());
                        break;

                    case Rigth_Type.zhujizhengjitl:
                        Smodel = ServicModel.PD_SCRW.SELECT(model, getToken());
                        break;

                    case Rigth_Type.zhuxiancc:
                        Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                        break;

                    case Rigth_Type.baobiaocc:
                        Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                        break;

                    case Rigth_Type.dczztl_cc:
                        Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                        break;

                    case Rigth_Type.baozhuangcc:
                        Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                        break;

                    case Rigth_Type.ddjtl_cc:
                        Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                        break;

                    default:
                        Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                        break;
                    }
                    if (Smodel.MES_RETURN.TYPE == "E")
                    {
                        if (RigthType == Rigth_Type.baobiaocc || RigthType == Rigth_Type.dczztl_cc)
                        {
                            frmBaobiao form = new frmBaobiao(new MES_PD_SCRW_LIST(), model.SBBH, RigthType, sbList[0].SBMS);
                            push(form, this);
                            return;
                        }
                        else if (RigthType == Rigth_Type.baozhuangcc)
                        {
                            frmBaozhuang form = new frmBaozhuang(new MES_PD_SCRW_LIST(), model.SBBH, RigthType, sbList[0].SBMS);
                            push(form, this);
                            return;
                        }
                        else
                        {
                            //MessageBox.Show(Smodel.MES_RETURN.MESSAGE, "消息框");
                            ShowMeg(Smodel.MES_RETURN.MESSAGE);
                            return;
                        }
                    }
                    if (Smodel.MES_PD_SCRW_LIST.Length == 0)
                    {
                        //MessageBox.Show("找不到工作中心是" + Gzzx + "设备号是" + sbList[0].SBMS + "对应的派单任务!!!", "消息框");
                        ShowMeg(string.Format(q(Msg_Type.msgnorw), Gzzx, sbList[0].SBMS));
                        return;
                    }
                    else if (Smodel.MES_PD_SCRW_LIST.Length == 1)
                    {
                        if (RigthType == Rigth_Type.fujitl)
                        {
                            ini.IniWriteValue(ini.Section_Machine, "fjsbh", smtextBox1.Text.Trim());
                            frmFujiTL_N fjtlform = new frmFujiTL_N(Smodel.MES_PD_SCRW_LIST, sbList[0].SBMS, sbList[0].SBBH);
                            push(fjtlform, this);
                        }
                        else if (RigthType == Rigth_Type.gangketl_cc || RigthType == Rigth_Type.jidiantitl_cc || RigthType == Rigth_Type.mfqqingxi || RigthType == Rigth_Type.gmgtl_cc || RigthType == Rigth_Type.fujifengkoujitl_cc)
                        {
                            frmTL2_1 form = new frmTL2_1(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);
                            push(form, this);
                        }
                        else if (RigthType == Rigth_Type.ddjtl_cc)
                        {
                            frmTL2_2 form = new frmTL2_2(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);
                            push(form, this);
                        }
                        else if (RigthType == Rigth_Type.zhuxiancc)
                        {
                            frmZX_CC form = new frmZX_CC(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);
                            push(form, this);
                        }
                        else if (RigthType == Rigth_Type.baobiaocc || RigthType == Rigth_Type.dczztl_cc)
                        {
                            frmBaobiao form = new frmBaobiao(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType, sbList[0].SBMS);
                            push(form, this);
                        }
                        else if (RigthType == Rigth_Type.baozhuangcc)
                        {
                            frmBaozhuang form = new frmBaozhuang(new MES_PD_SCRW_LIST(), model.SBBH, RigthType, sbList[0].SBMS);
                            push(form, this);
                        }
                        else if (RigthType == Rigth_Type.zhuxiantl || RigthType == Rigth_Type.zhujizhengjitl)
                        {
                            frmZX_TL form = new frmZX_TL(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);;
                            push(form, this);
                        }
                    }
                    else if (Smodel.MES_PD_SCRW_LIST.Length > 1)
                    {
                        if (RigthType == Rigth_Type.fujitl)
                        {
                            ini.IniWriteValue(ini.Section_Machine, "fjsbh", smtextBox1.Text.Trim());
                            frmFujiTL_N fjtlform = new frmFujiTL_N(Smodel.MES_PD_SCRW_LIST, sbList[0].SBMS, sbList[0].SBBH);
                            push(fjtlform, this);
                        }
                        else if (RigthType == Rigth_Type.zhuxiantl || RigthType == Rigth_Type.zhujizhengjitl)
                        {
                            frmZX_TL form = new frmZX_TL(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);
                            push(form, this);
                        }
                        this.Close();
                    }
                }
                else
                {
                    ShowMeg(q(Msg_Type.msgsbhnomacthgzzz));//"扫描的设备号不是当前工作中心下的"
                }
            }
            else if (sbList.Length == 0)
            {
                ShowMeg(q(Msg_Type.msgscannosbh));//"扫描的不是设备号条码"
                return;
            }
            else
            {
                ShowMeg(q(Msg_Type.msgsystemerror));//"系统异常请联系管理员"
                return;
            }
        }
Example #5
0
        private void btn_Click(object sender, EventArgs e)
        {
            Button      btn   = (Button)sender;
            string      sbbh  = Convert.ToString(btn.Tag);
            MES_PD_SCRW model = new MES_PD_SCRW();

            model.SBBH = sbbh;
            //model.ZPRQ = DateTime.Now.ToString("yyyy-MM-dd");
            model.ZPRQ = Convert.ToDateTime(ServicModel.PUBLIC_FUNC.GET_TIME(getToken())).ToString("yyyy-MM-dd");
            string sydt = "";

            SBHID = model.SBBH;
            SELECT_MES_PD_SCRW Smodel;

            switch (RigthType)
            {
            case Rigth_Type.gangketl_cc:
                Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());

                break;

            case Rigth_Type.jidiantitl_cc:
                Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                break;

            case Rigth_Type.fujitl:
                sydt       = GetSystemDate(Date_Type.hour, -4, "yyyy-MM-dd");//Convert.ToDateTime(ServicModel.PUBLIC_FUNC.GET_TIME(getToken())).AddHours(-4).ToString("yyyy-MM-dd");//系统减4个小时
                model.ZPRQ = sydt;
                Smodel     = ServicModel.PD_SCRW.SELECT(model, getToken());
                break;

            case Rigth_Type.fujicc:
                sydt       = GetSystemDate(Date_Type.hour, -4, "yyyy-MM-dd");//Convert.ToDateTime(ServicModel.PUBLIC_FUNC.GET_TIME(getToken())).AddHours(-4).ToString("yyyy-MM-dd");//系统减4个小时
                model.ZPRQ = sydt;
                Smodel     = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                break;

            case Rigth_Type.zhengjicc:
                Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                break;

            case Rigth_Type.zhuxiantl:
                Smodel = ServicModel.PD_SCRW.SELECT(model, getToken());
                break;

            case Rigth_Type.zhujizhengjitl:
                Smodel = ServicModel.PD_SCRW.SELECT(model, getToken());
                break;

            case Rigth_Type.zhuxiancc:
                Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                break;

            case Rigth_Type.baobiaocc:
                Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                break;

            case Rigth_Type.dczztl_cc:
                Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                break;

            case Rigth_Type.baozhuangcc:
                Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                break;

            case Rigth_Type.ddjtl_cc:
                Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                break;

            default:
                Smodel = ServicModel.PD_SCRW.SELECT_LAST(model, getToken());
                break;
            }
            //如果是E的时候只有包标、组合电池、包装可以进入投料产出界面,在界面上扫描工单和托盘码生成相应的任务
            if (Smodel.MES_RETURN.TYPE == "E")
            {
                if (RigthType == Rigth_Type.baobiaocc || RigthType == Rigth_Type.dczztl_cc)
                {
                    if (string.IsNullOrEmpty(Tm))
                    {
                        frmBaobiao form = new frmBaobiao(new MES_PD_SCRW_LIST(), model.SBBH, RigthType, btn.Text);
                        push(form, this);
                    }
                    else
                    {
                        frmBaobiao form = new frmBaobiao(new MES_PD_SCRW_LIST(), model.SBBH, RigthType, btn.Text, Tm);
                        push(form, this);
                    }

                    return;
                }
                else if (RigthType == Rigth_Type.baozhuangcc)
                {
                    if (string.IsNullOrEmpty(Tm))
                    {
                        frmBaozhuang form = new frmBaozhuang(new MES_PD_SCRW_LIST(), model.SBBH, RigthType, btn.Text);
                        push(form, this);
                    }
                    else
                    {
                        frmBaozhuang form = new frmBaozhuang(new MES_PD_SCRW_LIST(), model.SBBH, RigthType, btn.Text, Tm);
                        push(form, this);
                    }

                    return;
                }
                else
                {
                    //MessageBox.Show(Smodel.MES_RETURN.MESSAGE, "消息框");
                    ShowMeg(Smodel.MES_RETURN.MESSAGE);
                    return;
                }
            }

            if (Smodel.MES_PD_SCRW_LIST.Length == 0)
            {
                //MessageBox.Show("找不到工作中心是" + Gzzx + "设备号是" + btn.Text + "对应的派单任务!!!", "消息框");
                ShowMeg(string.Format(q(Msg_Type.msgnorw), Gzzx, btn.Text));
                return;
            }
            else if (Smodel.MES_PD_SCRW_LIST.Length == 1)
            {
                if (RigthType == Rigth_Type.fujitl)
                {
                    ini.IniWriteValue(ini.Section_Machine, "fjsbh", sbbh);
                    frmFujiTL_N fjtlform = new frmFujiTL_N(Smodel.MES_PD_SCRW_LIST, btn.Text, sbbh);

                    push(fjtlform, this);
                }
                else if (RigthType == Rigth_Type.gangketl_cc || RigthType == Rigth_Type.jidiantitl_cc || RigthType == Rigth_Type.mfqqingxi || RigthType == Rigth_Type.gmgtl_cc || RigthType == Rigth_Type.fujifengkoujitl_cc || RigthType == Rigth_Type.zhengjifengkoujitl_cc)
                {
                    //frmTL2  form = new frmTL2(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);
                    //push(form);
                    frmTL2_1 form = new frmTL2_1(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);
                    push(form, this);
                }
                else if (RigthType == Rigth_Type.ddjtl_cc)
                {
                    frmTL2_2 form = new frmTL2_2(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);
                    push(form, this);
                }
                else if (RigthType == Rigth_Type.zhuxiancc)
                {
                    frmZX_CC form = new frmZX_CC(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);
                    push(form, this);
                }
                else if (RigthType == Rigth_Type.baobiaocc || RigthType == Rigth_Type.dczztl_cc)
                {
                    if (string.IsNullOrEmpty(Tm))
                    {
                        frmBaobiao form = new frmBaobiao(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType, btn.Text);
                        push(form, this);
                    }
                    else
                    {
                        frmBaobiao form = new frmBaobiao(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType, btn.Text, Tm);
                        push(form, this);
                    }
                }
                else if (RigthType == Rigth_Type.baozhuangcc)
                {
                    if (string.IsNullOrEmpty(Tm))
                    {
                        frmBaozhuang form = new frmBaozhuang(new MES_PD_SCRW_LIST(), model.SBBH, RigthType, btn.Text);
                        push(form, this);
                    }
                    else
                    {
                        frmBaozhuang form = new frmBaozhuang(new MES_PD_SCRW_LIST(), model.SBBH, RigthType, btn.Text, Tm);
                        push(form, this);
                    }
                }
                else if (RigthType == Rigth_Type.zhuxiantl || RigthType == Rigth_Type.zhujizhengjitl)
                {
                    frmZX_TL form = new frmZX_TL(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);;
                    push(form, this);
                }
            }
            else if (Smodel.MES_PD_SCRW_LIST.Length > 1)//查询到的任务大于1的只有负极投料和主线投料
            {
                if (RigthType == Rigth_Type.fujitl)
                {
                    ini.IniWriteValue(ini.Section_Machine, "fjsbh", sbbh);
                    frmFujiTL_N fjtlform = new frmFujiTL_N(Smodel.MES_PD_SCRW_LIST, btn.Text, sbbh);
                    push(fjtlform, this);
                }
                else if (RigthType == Rigth_Type.zhuxiantl || RigthType == Rigth_Type.zhujizhengjitl)
                {
                    frmZX_TL form = new frmZX_TL(Smodel.MES_PD_SCRW_LIST[0], model.SBBH, RigthType);
                    push(form, this);
                }
                this.Close();
            }
        }