/// <summary>
/// Retrieve the room plan view boundary
/// polygon loops and convert to 2D integer-based.
/// For optimisation and consistency reasons,
/// convert all coordinates to integer values in
/// millimetres. Revit precision is limited to
/// 1/16 of an inch, which is abaut 1.2 mm, anyway.
/// </summary>
static JtLoops GetRoomLoops(Room room)
{
SpatialElementBoundaryOptions opt
= new SpatialElementBoundaryOptions();
opt.SpatialElementBoundaryLocation =
SpatialElementBoundaryLocation.Center; // loops closed
//SpatialElementBoundaryLocation.Finish; // loops not closed
IList <IList <BoundarySegment> > loops = room.
GetBoundarySegments(opt);
int nLoops = loops.Count;
JtLoops jtloops = new JtLoops(nLoops);
foreach (IList <BoundarySegment> loop in loops)
{
int nSegments = loop.Count;
JtLoop jtloop = new JtLoop(nSegments);
XYZ p0 = null; // loop start point
XYZ p; // segment start point
XYZ q = null; // segment end point
foreach (BoundarySegment seg in loop)
{
// Todo: handle non-linear curve.
// Especially: if two long lines have a
// short arc in between them, skip the arc
// and extend both lines.
p = seg.Curve.GetEndPoint(0);
jtloop.Add(new Point2dInt(p));
Debug.Assert(null == q || q.IsAlmostEqualTo(p),
"expected last endpoint to equal current start point");
q = seg.Curve.GetEndPoint(1);
if (_debug_output)
{
Debug.Print("{0} --> {1}",
Util.PointString(p),
Util.PointString(q));
}
if (null == p0)
{
p0 = p; // save loop start point
}
}
Debug.Assert(q.IsAlmostEqualTo(p0),
"expected last endpoint to equal loop start point");
jtloops.Add(jtloop);
}
return(jtloops);
}
/// <summary>
/// Retrieve all plan view boundary loops from
/// all solids of given element united together.
/// If the element is a family instance, transform
/// its loops from the instance placement
/// coordinate system back to the symbol
/// definition one.
/// If no geometry can be determined, use the
/// bounding box instead.
/// </summary>
static JtLoops GetPlanViewBoundaryLoops(
Element e,
ref int nFailures)
{
Autodesk.Revit.Creation.Application creapp
= e.Document.Application.Create;
JtLoops loops = null;
Options opt = new Options();
GeometryElement geo = e.get_Geometry(opt);
if (null != geo)
{
Document doc = e.Document;
if (e is FamilyInstance)
{
// Retrieve family instance geometry
// transformed back to symbol definition
// coordinate space by inverting the
// family instance placement transformation
LocationPoint lp = e.Location
as LocationPoint;
Transform t = Transform.CreateTranslation(
-lp.Point);
Transform r = Transform.CreateRotationAtPoint(
XYZ.BasisZ, -lp.Rotation, lp.Point);
geo = geo.GetTransformed(t * r);
}
loops = GetPlanViewBoundaryLoopsGeo(
creapp, geo, ref nFailures);
}
if (null == loops || 0 == loops.Count)
{
Debug.Print(
"Unable to determine geometry for "
+ Util.ElementDescription(e)
+ "; using bounding box instead.");
BoundingBoxXYZ bb;
if (e is FamilyInstance)
{
bb = (e as FamilyInstance).Symbol
.get_BoundingBox(null);
}
else
{
bb = e.get_BoundingBox(null);
}
JtLoop loop = new JtLoop(4);
loop.Add(new Point2dInt(bb.Min));
loop.Add(new Point2dInt(bb.Max.X, bb.Min.Y));
loop.Add(new Point2dInt(bb.Max));
loop.Add(new Point2dInt(bb.Min.X, bb.Max.Y));
loops.Add(loop);
}
return(loops);
}
/// <summary>
/// Return a closed loop of integer-based points
/// scaled to millimetres from a given Revit model
/// face in feet.
/// </summary>
internal static JtLoop GetLoop(
Autodesk.Revit.Creation.Application creapp,
Face face)
{
JtLoop loop = null;
foreach (EdgeArray a in face.EdgeLoops)
{
int nEdges = a.Size;
List <Curve> curves
= new List <Curve>(nEdges);
XYZ p0 = null; // loop start point
XYZ p; // edge start point
XYZ q = null; // edge end point
// Test ValidateCurveLoops
//CurveLoop loopIfc = new CurveLoop();
foreach (Edge e in a)
{
// This requires post-processing using
// SortCurvesContiguous:
Curve curve = e.AsCurve();
if (_debug_output)
{
p = curve.GetEndPoint(0);
q = curve.GetEndPoint(1);
Debug.Print("{0} --> {1}",
Util.PointString(p),
Util.PointString(q));
}
// This returns the curves already
// correctly oriented:
curve = e.AsCurveFollowingFace(
face);
if (_debug_output)
{
p = curve.GetEndPoint(0);
q = curve.GetEndPoint(1);
Debug.Print("{0} --> {1} following face",
Util.PointString(p),
Util.PointString(q));
}
curves.Add(curve);
// Throws an exception saying "This curve
// will make the loop not contiguous.
// Parameter name: pCurve"
//loopIfc.Append( curve );
}
// We never reach this point:
//List<CurveLoop> loopsIfc
// = new List<CurveLoop>( 1 );
//loopsIfc.Add( loopIfc );
//IList<CurveLoop> loopsIfcOut = ExporterIFCUtils
// .ValidateCurveLoops( loopsIfc, XYZ.BasisZ );
// This is no longer needed if we use
// AsCurveFollowingFace instead of AsCurve:
CurveUtils.SortCurvesContiguous(
creapp, curves, _debug_output);
q = null;
loop = new JtLoop(nEdges);
foreach (Curve curve in curves)
{
// Todo: handle non-linear curve.
// Especially: if two long lines have a
// short arc in between them, skip the arc
// and extend both lines.
p = curve.GetEndPoint(0);
Debug.Assert(null == q ||
q.IsAlmostEqualTo(p, 1e-04),
string.Format(
"expected last endpoint to equal current start point, not distance {0}",
(null == q ? 0 : p.DistanceTo(q))));
q = curve.GetEndPoint(1);
if (_debug_output)
{
Debug.Print("{0} --> {1}",
Util.PointString(p),
Util.PointString(q));
}
if (null == p0)
{
p0 = p; // save loop start point
}
int n = -1;
if (_tessellate_curves &&
_min_tessellation_curve_length_in_feet
< q.DistanceTo(p))
{
IList <XYZ> pts = curve.Tessellate();
n = pts.Count;
Debug.Assert(1 < n, "expected at least two points");
Debug.Assert(p.IsAlmostEqualTo(pts[0]), "expected tessellation start equal curve start point");
Debug.Assert(q.IsAlmostEqualTo(pts[n - 1]), "expected tessellation end equal curve end point");
if (2 == n)
{
n = -1; // this is a straight line
}
else
{
--n; // skip last point
for (int i = 0; i < n; ++i)
{
loop.Add(new Point2dInt(pts[i]));
}
}
}
// If tessellation is disabled,
// or curve is too short to tessellate,
// or has only two tessellation points,
// just add the start point:
if (-1 == n)
{
loop.Add(new Point2dInt(p));
}
}
Debug.Assert(q.IsAlmostEqualTo(p0, 1e-05),
string.Format(
"expected last endpoint to equal current start point, not distance {0}",
p0.DistanceTo(q)));
}
return(loop);
}