public void ParseJal(RvcPayload payload, InstructionPayload instructionPayload)
{
Logger.Info("Parsing C.JAL");
instructionPayload.Rd = 1;
instructionPayload.SignedImmediate = DecodeJalOffset(payload.Immediate);
}
public void ParseLui(RvcPayload payload, InstructionPayload instructionPayload)
{
//
// C.LUI loads the non-zero 6-bit immediate field into bits 17–12 of the destination register, clears the
// bottom 12 bits, and sign-extends bit 17 into all higher bits of the destination.C.LUI expands into
// lui rd, nzimm[17:12].C.LUI is only valid when rd̸ = { x0, x2 }, and when the immediate is not
// equal to zero. The code points with nzimm = 0 are reserved; the remaining code points with rd = x0
// are HINTs; and the remaining code points with rd = x2 correspond to the C.ADDI16SP instruction.
//
Logger.Info("Parsing C.LUI");
// nzimm[17...12] = payload.immediate
if (payload.Rd == 0 || payload.Rd == 2)
{
throw new RvcFormatException("C.LUI does not accept RD=0 or RD=2");
}
instructionPayload.Rd = payload.Rd;
uint uimmediate = Convert.ToUInt32(payload.Immediate << 12);
// Expand Bit 17 to the higher ones (31....17)
uint bitmask = 0xFFFFC000;
uint b17 = 0x020000;
if ((uimmediate & b17) == b17)
{
uimmediate |= bitmask;
}
instructionPayload.UnsignedImmediate = uimmediate;
}
public void ParseSrli(RvcPayload payload, InstructionPayload instructionPayload)
{
//
// C.SRLI is a CB-format instruction that performs a logical right shift of the value in register rd ′
// then writes the result to rd ′. The shift amount is encoded in the shamt field.For RV128C, a shift
// amount of zero is used to encode a shift of 64.Furthermore, the shift amount is sign - extended for
// RV128C, and so the legal shift amounts are 1–31, 64, and 96–127.C.SRLI expands into srli rd ′,
// rd ′, shamt[5:0], except for RV128C with shamt = 0, which expands to srli rd ′, rd ′, 64.
//
// For RV32C, shamt[5] must be zero; the code points with shamt[5]=1 are reserved for custom
// extensions.For RV32C and RV64C, the shift amount must be non - zero; the code points with
// shamt = 0 are HINTs.
Logger.Info("Parsing C.SRLI");
if ((payload.Immediate & 0x20) == 0x20)
{
throw new RvcFormatException("Bit 5 for the RV32C C.SRLI must be zero");
}
// SRLI rd`,rd`,shamt[5:0]
// srli rd rs1 31..26=0 shamt 14..12=5 6..2=0x04 1..0=3
instructionPayload.Funct3 = 5;
instructionPayload.Rs1 = payload.Rs1;
instructionPayload.Rd = payload.Rd;
instructionPayload.SignedImmediate = payload.Immediate;
}
public void ParseCaGeneric(RvcPayload payload, InstructionPayload instructionPayload)
{
//
// These instructions use the CA format.
//
// C.AND computes the bitwise AND of the values in registers rd ′ and rs2 ′, then writes the result to
// register rd ′. C.AND expands into and rd ′, rd ′, rs2 ′.
//
// C.OR computes the bitwise OR of the values in registers rd ′ and rs2 ′, then writes the result to
// register rd ′. C.OR expands into or rd ′, rd ′, rs2 ′.
//
// C.XOR computes the bitwise XOR of the values in registers rd ′ and rs2 ′, then writes the result to
// register rd ′. C.XOR expands into xor rd ′, rd ′, rs2 ′.
//
// C.SUB subtracts the value in register rs2 ′ from the value in register rd ′, then writes the result to
// register rd ′. C.SUB expands into sub rd ′, rd ′, rs2 ′.
// add rd rs1 rs2 31..25 = 0 14..12 = 0 6..2 = 0x0C 1..0 = 3
// sub rd rs1 rs2 31..25 = 32 14..12 = 0 6..2 = 0x0C 1..0 = 3
// sll rd rs1 rs2 31..25 = 0 14..12 = 1 6..2 = 0x0C 1..0 = 3
// slt rd rs1 rs2 31..25 = 0 14..12 = 2 6..2 = 0x0C 1..0 = 3
// sltu rd rs1 rs2 31..25 = 0 14..12 = 3 6..2 = 0x0C 1..0 = 3
// xor rd rs1 rs2 31..25 = 0 14..12 = 4 6..2 = 0x0C 1..0 = 3
// srl rd rs1 rs2 31..25 = 0 14..12 = 5 6..2 = 0x0C 1..0 = 3
// sra rd rs1 rs2 31..25 = 32 14..12 = 5 6..2 = 0x0C 1..0 = 3
// or rd rs1 rs2 31..25 = 0 14..12 = 6 6..2 = 0x0C 1..0 = 3
// and rd rs1 rs2 31..25 = 0 14..12 = 7 6..2 = 0x0C 1..0 = 3
Logger.Info("Parsing C.SUB / C.XOR / C.OR / C.AND");
instructionPayload.Rs1 = payload.Rs1;
instructionPayload.Rs2 = payload.Rs2;
instructionPayload.Rd = payload.Rd;
if (payload.CAMode == 0)
{
// C.SUB
// f3 = 0
instructionPayload.Funct7 = 0x32;
}
if (payload.CAMode == 1)
{
// C.XOR
instructionPayload.Funct3 = 4;
}
if (payload.CAMode == 2)
{
// C.OR
instructionPayload.Funct3 = 6;
}
if (payload.CAMode == 3)
{
// C.AND
instructionPayload.Funct3 = 7;
}
}
private InstructionPayload DecodeTypeI(Instruction instruction, IEnumerable <byte> inst32Coding)
{
if (instruction == null)
{
throw new ArgumentNullException("instruction");
}
var payload = new InstructionPayload(instruction, inst32Coding);
var bytes = inst32Coding;
int workingBuffer;
// b4 (bit 0...7)
// b3 (bit 8...15)
// b2 (bit 16...23)
// b1 (bit 24...31)
//
// Opcode = 0 ... 6
// rd = 7 ... 11
// funct3 = 12 ... 14
// rs1 = 15 ... 19
// Imm. = 20 ... 31
var b4 = bytes.ElementAt(3);
var b3 = bytes.ElementAt(2);
var b2 = bytes.ElementAt(1);
// decode funct3
workingBuffer = b2;
workingBuffer >>= 4;
int funct3 = Convert.ToInt32(workingBuffer & 0x7);
// decode rs1
workingBuffer = b3;
workingBuffer <<= 8;
workingBuffer |= b2;
// working Buffer = b3b2;
workingBuffer >>= 7;
workingBuffer &= 0x1F;
int rs1 = Convert.ToInt32(workingBuffer);
// decode immediate
workingBuffer = b4;
workingBuffer <<= 8;
workingBuffer |= b3;
workingBuffer >>= 4;
int immediate = MathHelper.GetSignedInteger(workingBuffer, instruction.Type);
var rd = GetRd(inst32Coding);
payload.Rd = rd;
payload.Funct3 = funct3;
payload.Rs1 = rs1;
payload.SignedImmediate = immediate;
payload.UnsignedImmediate = Convert.ToUInt32(workingBuffer);
payload.SignedImmediateComplete = Convert.ToInt32(workingBuffer);
return(payload);
}
public void ParseSd(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
Logger.Info("Parsing C.SD");
instructionPayload.Funct3 = 3;
instructionPayload.Rs1 = rvcPayload.Rs1;
instructionPayload.Rs2 = rvcPayload.Rs2;
instructionPayload.SignedImmediate = DecodeLoadStoreOffset(rvcPayload.Immediate);
}
public void ParseSlli(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
Logger.Info("Parsing C.SLLI");
// slli rd rs1 31..26=0 shamt 14..12=1 6..2=0x04 1..0=3
instructionPayload.Rd = rvcPayload.Rd;
instructionPayload.Rs1 = rvcPayload.Rs1;
instructionPayload.Funct3 = 1;
instructionPayload.SignedImmediate = rvcPayload.Immediate;
}
public void ParseLdSp(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
Logger.Info("Parsing C.LDSP");
// ld rd rs1 imm12 14..12=3 6..2=0x00 1..0=3
instructionPayload.Rd = rvcPayload.Rd;
instructionPayload.Rs1 = 2;
instructionPayload.Funct3 = 3;
instructionPayload.SignedImmediate = DecodeLoadStoreSpOffset(rvcPayload.Immediate);
}
public void ParseLd(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
Logger.Info("Parsing C.LD");
// rs1
// rd
// Offset : 5 4 3 7 6 (scaled by 8 (3 2 1 0))
instructionPayload.Funct3 = 3;
instructionPayload.Rs1 = rvcPayload.Rs1;
instructionPayload.Rd = rvcPayload.Rd;
instructionPayload.SignedImmediate = DecodeLoadStoreOffset(rvcPayload.Immediate);
}
public void ParseSdSp(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
Logger.Info("Parsing C.SDSP");
// sd imm12hi rs1 rs2 imm12lo 14..12=3 6..2=0x08 1..0=3
instructionPayload.Rd = rvcPayload.Rd;
instructionPayload.Rs1 = 2;
instructionPayload.Rs2 = rvcPayload.Rs2;
instructionPayload.Funct3 = 3;
instructionPayload.SignedImmediate = DecodeLoadStoreSpOffset(rvcPayload.Immediate);
}
public void ParseSlli(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
// C.SLLI is a CI-format instruction that performs a logical left shift of the value in register rd then
// writes the result to rd.The shift amount is encoded in the shamt field.
Logger.Info("Parsing C.SLLI");
instructionPayload.Rs1 = rvcPayload.Rs1;
instructionPayload.Rd = rvcPayload.Rd;
instructionPayload.Funct3 = 1;
// The type decoder automatically generated the correct order
instructionPayload.SignedImmediate = rvcPayload.Immediate;
}
public void ParseAddiW(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
Logger.Info("Parsing C.AddiW");
// addiw rd rs1 imm12 14..12=0 6..2=0x06 1..0=3
instructionPayload.Rd = rvcPayload.Rd;
instructionPayload.Rs1 = rvcPayload.Rs1;
var immediate = MathHelper.GetSignedInteger(rvcPayload.Immediate, 5);
instructionPayload.SignedImmediate = immediate;
}
public void ParseAddi16Sp(RvcPayload payload, InstructionPayload instructionPayload)
{
//
// C.ADDI16SP shares the opcode with C.LUI, but has a destination field of x2. C.ADDI16SP adds
// the non-zero sign - extended 6 - bit immediate to the value in the stack pointer(sp = x2), where the
// immediate is scaled to represent multiples of 16 in the range(-512,496). C.ADDI16SP is used
// to adjust the stack pointer in procedure prologues and epilogues. It expands into addi x2, x2,
// nzimm[9:4].C.ADDI16SP is only valid when nzimm̸ = 0; the code point with nzimm = 0 is reserved.
//
Logger.Info("Parsing C.ADDI16SP");
instructionPayload.Rd = 2;
instructionPayload.Rs1 = 2;
// b5
int buffer = payload.Immediate;
int immediate = buffer & 0x01;
immediate <<= 5;
// 8 7
buffer >>= 1;
int b87 = buffer & 0x03;
b87 <<= 7;
immediate |= b87;
// 6
buffer >>= 2;
int b6 = buffer & 0x01;
b6 <<= 6;
immediate |= b6;
// 4
buffer >>= 1;
int b4 = buffer & 0x01;
b4 <<= 4;
immediate |= b4;
// 9
buffer >>= 1;
int b9 = buffer & 0x01;
b9 <<= 9;
immediate |= b9;
instructionPayload.SignedImmediate = immediate;
}
public void ParseAddAndMv(RvcPayload payload, InstructionPayload instructionPayload)
{
Logger.Info("Parsing C.MV / C.ADD");
instructionPayload.Rd = payload.Rd;
instructionPayload.Rs2 = payload.Rs2;
// F4 == 9 => C.ADD
// F4 == 8 => C.MV und RS1 = x0
if (payload.Funct4 == 9)
{
instructionPayload.Rs1 = payload.Rd;
}
}
public void ParseAddi(RvcPayload payload, InstructionPayload instructionPayload)
{
//
// C.ADDI adds the non-zero sign-extended 6-bit immediate to the value in register rd then writes
// the result to rd. C.ADDI expands into addi rd, rd, nzimm[5:0].C.ADDI is only valid when
// rd̸ = x0 and nzimm̸ = 0.The code points with rd = x0 encode the C.NOP instruction; the remaining
// code points with nzimm = 0 encode HINTs.
//
Logger.Info("Parsing C.ADDI");
instructionPayload.Rd = payload.Rd;
instructionPayload.Rs1 = payload.Rs1;
instructionPayload.SignedImmediate = payload.Immediate; // non-zero immediate.
}
public void ParseBeqzAndBnez(RvcPayload payload, InstructionPayload instructionPayload, bool forEqual)
{
Logger.Info("Parsing C.BEQZ / C.BNEZ");
if (forEqual)
{
instructionPayload.Funct3 = 0;
}
else
{
instructionPayload.Funct3 = 1;
}
instructionPayload.Rs1 = payload.Rs1;
instructionPayload.SignedImmediate = DecodeCbOffset(payload.Immediate);
}
public void ParseAndi(RvcPayload payload, InstructionPayload instructionPayload)
{
//
// C.ANDI is a CB-format instruction that computes the bitwise AND of the value in register rd ′ and
// the sign-extended 6 - bit immediate, then writes the result to rd ′. C.ANDI expands to andi rd ′,
// rd ′, imm[5:0].
//
Logger.Info("Parsing C.ANDI");
instructionPayload.Funct3 = 7;
instructionPayload.Rs1 = payload.Rs1;
instructionPayload.Rd = payload.Rd;
// Signed 6 Bit imm
instructionPayload.SignedImmediate = MathHelper.GetSignedInteger(payload.Immediate, 5);
}
private InstructionPayload DecodeTypeU(Instruction instruction, IEnumerable <byte> inst32Coding)
{
if (instruction == null)
{
throw new ArgumentNullException("instruction");
}
var payload = new InstructionPayload(instruction, inst32Coding);
var bytes = inst32Coding;
uint workingBuffer;
// b4 (bit 0...7)
// b3 (bit 8...15)
// b2 (bit 16...23)
// b1 (bit 24...31)
//
// Opcode = 0 ... 6
// rd = 7 ... 11
// funct3 = 12 ... 14
// rs1 = 15 ... 19
// Imm. = 20 ... 31
var b4 = bytes.ElementAt(3);
var b3 = bytes.ElementAt(2);
var b2 = bytes.ElementAt(1);
// fill the buffer with b4 b3 b2
workingBuffer = b4;
workingBuffer <<= 8;
workingBuffer |= b3;
workingBuffer <<= 8;
workingBuffer |= b2;
// shift to the right and that's it. Signed bit ??
workingBuffer >>= 4;
uint immediate = workingBuffer;
var rd = GetRd(inst32Coding);
payload.Rd = rd;
payload.UnsignedImmediate = immediate;
return(payload);
}
public void ParseJrAndJalr(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
//
// F4 = 8
// C.JR (jump register) performs an unconditional control transfer to the address in register rs1.
// C.JR expands to jalr x0, 0(rs1).C.JR is only valid when rs1̸ = x0; the code point with rs1 = x0
// is reserved.
//
// F4 = 9
// C.JALR (jump and link register) performs the same operation as C.JR, but additionally writes the
// address of the instruction following the jump(pc + 2) to the link register, x1. C.JALR expands to
// jalr x1, 0(rs1).C.JALR is only valid when rs1̸ = x0; the code point with rs1 = x0 corresponds
// to the C.EBREAK instruction.
//
//
Logger.Info("Parsing C.JR / C.JALR with F4 = {f4:X}", rvcPayload.Funct4);
var f4 = rvcPayload.Funct4;
if (f4 == 8)
{
// C.JR
if (rvcPayload.Rs1 == 0)
{
throw new RvcFormatException("Invalid C.JR coding. Rs1 cannot be 0");
}
instructionPayload.Rs1 = rvcPayload.Rs1;
}
if (f4 == 9)
{
// C.JALR
if (rvcPayload.Rs1 == 0)
{
throw new RvcFormatException("Invalid C.JALR coding. Rs1 cannot be 0");
}
instructionPayload.Rd = 1;
instructionPayload.Rs1 = rvcPayload.Rs1;
}
// RvcFormatException
}
public void ParseLw(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
//
// C.LW loads a 32-bit value from memory into register rd ′. It computes an effective address by
// adding the zero - extended offset, scaled by 4, to the base address in register rs1 ′. It expands to lw
// rd ′, offset[6:2](rs1 ′).
//
Logger.Info("Parsing C.LW");
instructionPayload.Rd = rvcPayload.Rd;
instructionPayload.Rs1 = rvcPayload.Rs1;
instructionPayload.Funct3 = 2;
int immediate = DecodeLoadStoreW(rvcPayload.Immediate);
instructionPayload.SignedImmediate = immediate;
}
public void ParseSw(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
//
// C.SW stores a 32-bit value in register rs2 ′ to memory. It computes an effective address by adding
// the zero-extended offset, scaled by 4, to the base address in register rs1 ′. It expands to sw rs2 ′,
// offset[6:2](rs1 ′).
//
Logger.Info("Parsing C.SP");
instructionPayload.Funct3 = 2;
instructionPayload.Rs2 = rvcPayload.Rs2; // The source
instructionPayload.Rs1 = rvcPayload.Rs1; // The register pointing to the memory address
int immediate = DecodeLoadStoreW(rvcPayload.Immediate);
instructionPayload.SignedImmediate = immediate;
}
public void ParseAddi4Spn(RvcPayload payload, InstructionPayload instructionPayload)
{
// C.ADDI4SPN is a CIW-format instruction that adds a zero-extended non-zero immediate, scaled
// by 4, to the stack pointer, x2, and writes the result to rd ′. This instruction is used to generate
// pointers to stack-allocated variables, and expands to addi rd ′, x2, nzuimm[9:2].C.ADDI4SPN
// is only valid when nzuimm̸ = 0; the code points with nzuimm = 0 are reserved.
Logger.Info("Parsing C.ADDI4SPN");
// nzuimm 5 4 9 8 7 6 2 3
instructionPayload.Rs1 = 2;
instructionPayload.Rd = payload.Rd;
instructionPayload.Funct3 = 0;
// 3
int buffer = payload.Immediate;
int immediate = buffer & 0x01;
int current;
immediate <<= 3;
// 2
buffer >>= 1;
current = buffer & 0x01;
current <<= 2;
immediate |= current;
// 9 8 7 6
buffer >>= 1;
current = buffer & 0x0F;
current <<= 6;
immediate |= current;
// 5 4
buffer >>= 4;
current = buffer & 0x03;
current <<= 4;
immediate |= current;
instructionPayload.SignedImmediate = immediate;
}
public void ParseAddWSubW(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
Logger.Info("Parsing C.AddW / C.SubW");
// addw rd rs1 rs2 31..25 = 0 14..12 = 0 6..2 = 0x0E 1..0 = 3
// subw rd rs1 rs2 31..25 = 32 14..12 = 0 6..2 = 0x0E 1..0 = 3
instructionPayload.Funct3 = 0;
// C.SUBW
if (rvcPayload.CAMode == 0)
{
instructionPayload.Funct7 = 0x32;
}
instructionPayload.Rs1 = rvcPayload.Rs1;
instructionPayload.Rs2 = rvcPayload.Rs2;
instructionPayload.Rd = rvcPayload.Rd;
}
public void ParseSwSp(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
//
// C.SWSP stores a 32-bit value in register rs2 to memory. It computes an effective address by
// adding the zero - extended offset, scaled by 4, to the stack pointer, x2. It expands to sw rs2,
// offset[7:2](x2).
//
// Immediate : [5] [4] [3] [2] [7] [6]
Logger.Info("Parsing C.SWSP");
instructionPayload.Funct3 = 2;
instructionPayload.Rs2 = rvcPayload.Rs2; // The source
instructionPayload.Rs1 = 2; // The register pointing to the memory address
int immediate = DecodeLoadStoreSp(rvcPayload.Immediate);
instructionPayload.SignedImmediate = immediate;
}
public void ParseSrai(RvcPayload payload, InstructionPayload instructionPayload)
{
//
// C.SRAI is defined analogously to C.SRLI, but instead performs an arithmetic right shift. C.SRAI
// expands to srai rd ′, rd ′, shamt[5:0].
//
// srai rd rs1 31..26 = 16 shamt 14..12 = 5 6..2 = 0x04 1..0 = 3
Logger.Info("Parsing C.SRAI");
if ((payload.Immediate & 0x20) == 0x20)
{
throw new RvcFormatException("Bit 5 for the RV32C C.SRAI must be zero");
}
instructionPayload.Funct3 = 5;
instructionPayload.Rs1 = payload.Rs1;
instructionPayload.Rd = payload.Rd;
instructionPayload.SignedImmediate = payload.Immediate | 0x400;
}
public void ParseLwSp(RvcPayload rvcPayload, InstructionPayload instructionPayload)
{
//
// C.LWSP loads a 32-bit value from memory into register rd. It computes an effective address
// by adding the zero-extended offset, scaled by 4, to the stack pointer, x2. It expands to lw rd,
// offset[7:2](x2).C.LWSP is only valid when rd̸ = x0; the code points with rd = x0 are reserved.
//
// 15...13 12 11..7 6 ... 2 1..0
// C.LWSP offset[5] dest̸=0 offset[4:2|7:6] C2
//
// Immediate : [5] [4] [3] [2] [7] [6]
Logger.Info("Parsing C.LWSP");
instructionPayload.Rd = rvcPayload.Rd;
instructionPayload.Funct3 = 2;
instructionPayload.Rs1 = 2;
int immediate = DecodeLoadStoreSp(rvcPayload.Immediate);
instructionPayload.SignedImmediate = immediate;
}
public void ParseLi(RvcPayload payload, InstructionPayload instructionPayload)
{
//
// C.LI loads the sign-extended 6-bit immediate, imm, into register rd. C.LI expands into addi rd,
// x0, imm[5:0].C.LI is only valid when rd̸ = x0; the code points with rd = x0 encode HINTs.
//
// rd = Signed Bit/5 4 3 2 1 0
// TODO: rd == 0 -> Hint... how?
// for now: throw an error with an indicatatio that the C.LI hint mode is not supported
// ---> MathHelper...
Logger.Info("Parsing C.LI");
if (payload.Rd == 0)
{
throw new RvcFormatException("C.LI using hint mode (rd=0) is currently not supported");
}
instructionPayload.Rd = payload.Rd;
// bit 4 3 2 1 0
int buffer = payload.Immediate;
int signedImmediate = buffer & 0x1F;
// signed bit 5
buffer >>= 5;
var b5 = buffer & 0x01;
b5 <<= 5;
signedImmediate |= b5;
instructionPayload.SignedImmediate = MathHelper.GetSignedInteger(signedImmediate, 5);
}
private InstructionPayload DecodeTypeR(Instruction instruction, IEnumerable <byte> inst32Coding)
{
if (instruction == null)
{
throw new ArgumentNullException("instruction");
}
var payload = new InstructionPayload(instruction, inst32Coding);
var bytes = inst32Coding;
uint workingBuffer;
// b4 (bit 0...7)
// b3 (bit 8...15)
// b2 (bit 16...23)
// b1 (bit 24...31)
//
// Opcode = 0 ... 6
// rd = 7 ... 11
// funct3 = 12 ... 14
// rs1 = 15 ... 19
// rs2 = 20 ... 24
// funct7 = 25 ... 31
var b4 = bytes.ElementAt(3);
var b3 = bytes.ElementAt(2);
var b2 = bytes.ElementAt(1);
// decode funct3
workingBuffer = b2;
workingBuffer >>= 4;
int funct3 = Convert.ToInt32(workingBuffer & 0x7);
// decode rs1
workingBuffer = b3;
workingBuffer <<= 8;
workingBuffer |= b2;
// working Buffer = b3b2;
workingBuffer >>= 7;
workingBuffer &= 0x1F;
int rs1 = Convert.ToInt32(workingBuffer);
// decode rs2
workingBuffer = b4;
workingBuffer <<= 8;
workingBuffer |= b3;
workingBuffer >>= 4;
workingBuffer &= 0x1F;
int rs2 = Convert.ToInt32(workingBuffer);
// funct 7
workingBuffer = b4;
workingBuffer >>= 1;
workingBuffer &= 0x7F;
int funct7 = Convert.ToInt32(workingBuffer);
var rd = GetRd(inst32Coding);
payload.Rd = rd;
payload.Funct3 = funct3;
payload.Rs1 = rs1;
payload.Rs2 = rs2;
payload.Funct7 = funct7;
return(payload);
}
private InstructionPayload DecodeTypeJ(Instruction instruction, IEnumerable <byte> inst32Coding)
{
if (instruction == null)
{
throw new ArgumentNullException("instruction");
}
var payload = new InstructionPayload(instruction, inst32Coding);
var bytes = inst32Coding;
int workingBuffer;
var b4 = bytes.ElementAt(3);
var b3 = bytes.ElementAt(2);
var b2 = bytes.ElementAt(1);
// fill the buffer with b4 b3 b2
workingBuffer = b4;
workingBuffer <<= 8;
workingBuffer |= b3;
workingBuffer <<= 8;
workingBuffer |= b2;
//
// Always a multiplier of 2 => first bit = 0.
//
// Imm 1...10 : 21...30
// Imm 11 : 20
// Imm 12..19 : 12 ... 19
// Imm 20 : Signed Bit
//
// Right shift and remove the rd bytes
workingBuffer >>= 4;
var rd = GetRd(inst32Coding);
// Ready. Now extract the pieces of the immediate
// Immm[19...12]
int immediate = workingBuffer & 0xFF;
immediate <<= 12;
// Imm[11]
workingBuffer >>= 8;
int b11 = workingBuffer & 0x01;
b11 <<= 11;
immediate |= b11;
// Imm[10...1]
workingBuffer >>= 1;
int b10to1 = workingBuffer & 0x3FF;
b10to1 <<= 1;
immediate |= b10to1;
// Imm[20]
workingBuffer >>= 10;
int b20 = workingBuffer & 0x01;
b20 <<= 20;
immediate |= b20;
//// shift by left for guaranteeing that we have 2 byte multiplier
//immediate <<= 1;
payload.Rd = rd;
payload.SignedImmediate = MathHelper.GetSignedInteger(immediate, instruction.Type);
return(payload);
}
private InstructionPayload DecodeTypeB(Instruction instruction, IEnumerable <byte> inst32Coding)
{
if (instruction == null)
{
throw new ArgumentNullException("instruction");
}
var payload = new InstructionPayload(instruction, inst32Coding);
var bytes = inst32Coding;
int workingBuffer;
// b4 (bit 0...7)
// b3 (bit 8...15)
// b2 (bit 16...23)
// b1 (bit 24...31)
//
// Opcode = 0 ... 6
// rd = 7 ... 11
// funct3 = 12 ... 14
// rs1 = 15 ... 19
// rs2 = 20 ... 24
// funct7 = 25 ... 31
var b4 = bytes.ElementAt(3);
var b3 = bytes.ElementAt(2);
var b2 = bytes.ElementAt(1);
var b1 = bytes.ElementAt(0);
// decode funct3
workingBuffer = b2;
workingBuffer >>= 4;
int funct3 = Convert.ToInt32(workingBuffer & 0x7);
// decode rs1
workingBuffer = b3;
workingBuffer <<= 8;
workingBuffer |= b2;
// working Buffer = b3b2;
workingBuffer >>= 7;
workingBuffer &= 0x1F;
int rs1 = Convert.ToInt32(workingBuffer);
// decode rs2
workingBuffer = b4;
workingBuffer <<= 8;
workingBuffer |= b3;
workingBuffer >>= 4;
workingBuffer &= 0x1F;
int rs2 = Convert.ToInt32(workingBuffer);
// compute the 12 bit signed integer
int immediate;
//
// Read Imm[4...1]
//
workingBuffer = b2;
workingBuffer <<= 8;
workingBuffer |= b1;
workingBuffer >>= 8; // Right shift the opcode and imm[11]
immediate = workingBuffer & 0x0F;
//
// Read Imm [10...5]
//
workingBuffer = b4;
workingBuffer >>= 1;
workingBuffer &= 0x7F;
workingBuffer <<= 4;
immediate |= workingBuffer;
//
// Read Imm [11]
//
workingBuffer = b1;
workingBuffer >>= 7;
workingBuffer <<= 10;
immediate |= workingBuffer;
//
// Read Imm[12]
//
workingBuffer = b4;
workingBuffer >>= 7;
workingBuffer <<= 11;
immediate |= workingBuffer;
// Finally a left shift to the immediate for making sure it is based on a multiple of 2.
// All in all a 12 Bit Signed Int
immediate <<= 1;
payload.Funct3 = funct3;
payload.Rs1 = rs1;
payload.Rs2 = rs2;
payload.SignedImmediate = MathHelper.GetSignedInteger(immediate, InstructionType.B_Type);
return(payload);
}