protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var getNumber = new GetInteger();
getNumber.SetLowerLimit(2, false);
getNumber.SetUpperLimit(10000000, false);
getNumber.SetDefaultInteger(RcCore.It.EngineSettings.Samples);
getNumber.SetCommandPrompt("Set Debug Options");
var toggleVerbose = new OptionToggle(RcCore.It.EngineSettings.Verbose, "No", "Yes");
var toggleInteractive = new OptionToggle(RcCore.It.EngineSettings.UseInteractiveRenderer, "No", "Yes");
var spotlightFactor = new OptionDouble(RcCore.It.EngineSettings.SpotlightFactor, 0.0, 1000000.0);
var pointlightFactor = new OptionDouble(RcCore.It.EngineSettings.PointlightFactor, 0.0, 1000000.0);
var sunlightFactor = new OptionDouble(RcCore.It.EngineSettings.SunlightFactor, 0.0, 1000000.0);
var arealightFactor = new OptionDouble(RcCore.It.EngineSettings.ArealightFactor, 0.0, 1000000.0);
var polishFactor = new OptionDouble(RcCore.It.EngineSettings.PolishFactor, 0.0, 1000000.0);
getNumber.AddOptionToggle("verbose", ref toggleVerbose);
getNumber.AddOptionToggle("use_interactive_renderer", ref toggleInteractive);
getNumber.AddOptionDouble("spotlight_factor", ref spotlightFactor);
getNumber.AddOptionDouble("pointlight_factor", ref pointlightFactor);
getNumber.AddOptionDouble("sunlight_factor", ref sunlightFactor);
getNumber.AddOptionDouble("arealight_factor", ref arealightFactor);
getNumber.AddOptionDouble("polish_factor", ref polishFactor);
while (true)
{
var getRc = getNumber.Get();
if (getNumber.CommandResult() != Result.Success) return getNumber.CommandResult();
switch (getRc)
{
case GetResult.Nothing:
case GetResult.Number:
RcCore.It.EngineSettings.Samples = getNumber.Number();
ReadOptions(toggleVerbose, toggleInteractive, spotlightFactor, pointlightFactor, sunlightFactor, arealightFactor, polishFactor);
break;
case GetResult.Option:
ReadOptions(toggleVerbose, toggleInteractive, spotlightFactor, pointlightFactor, sunlightFactor, arealightFactor, polishFactor);
continue;
default:
continue;
}
break;
}
return Result.Success;
}
public static Rhino.Commands.Result CommandLineOptions(Rhino.RhinoDoc doc)
{
// For this example we will use a GetPoint class, but all of the custom
// "Get" classes support command line options.
Rhino.Input.Custom.GetPoint gp = new Rhino.Input.Custom.GetPoint();
gp.SetCommandPrompt("GetPoint with options");
// set up the options
Rhino.Input.Custom.OptionInteger intOption = new Rhino.Input.Custom.OptionInteger(1, 1, 99);
Rhino.Input.Custom.OptionDouble dblOption = new Rhino.Input.Custom.OptionDouble(2.2, 0, 99.9);
Rhino.Input.Custom.OptionToggle boolOption = new Rhino.Input.Custom.OptionToggle(true, "Off", "On");
string[] listValues = new string[] { "Item0", "Item1", "Item2", "Item3", "Item4" };
gp.AddOptionInteger("Integer", ref intOption);
gp.AddOptionDouble("Double", ref dblOption);
gp.AddOptionToggle("Boolean", ref boolOption);
int listIndex = 3;
int opList = gp.AddOptionList("List", listValues, listIndex);
while (true)
{
// perform the get operation. This will prompt the user to input a point, but also
// allow for command line options defined above
Rhino.Input.GetResult get_rc = gp.Get();
if (gp.CommandResult() != Rhino.Commands.Result.Success)
return gp.CommandResult();
if (get_rc == Rhino.Input.GetResult.Point)
{
doc.Objects.AddPoint(gp.Point());
doc.Views.Redraw();
Rhino.RhinoApp.WriteLine("Command line option values are");
Rhino.RhinoApp.WriteLine(" Integer = {0}", intOption.CurrentValue);
Rhino.RhinoApp.WriteLine(" Double = {0}", dblOption.CurrentValue);
Rhino.RhinoApp.WriteLine(" Boolean = {0}", boolOption.CurrentValue);
Rhino.RhinoApp.WriteLine(" List = {0}", listValues[listIndex]);
}
else if (get_rc == Rhino.Input.GetResult.Option)
{
if (gp.OptionIndex() == opList)
listIndex = gp.Option().CurrentListOptionIndex;
continue;
}
break;
}
return Rhino.Commands.Result.Success;
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
ObjRef obj_ref;
var rc = RhinoGet.GetOneObject("Select surface", false, ObjectType.Surface, out obj_ref);
if (rc != Result.Success || obj_ref == null)
return rc;
var surface = obj_ref.Surface();
var gp = new GetPoint();
gp.SetCommandPrompt("Point on surface");
gp.Constrain(surface, false);
var option_toggle = new OptionToggle(false, "U", "V");
gp.AddOptionToggle("Direction", ref option_toggle);
Point3d point = Point3d.Unset;
while (true)
{
var grc = gp.Get();
if (grc == GetResult.Option)
continue;
else if (grc == GetResult.Point)
{
point = gp.Point();
break;
}
else
return Result.Nothing;
}
if (point == Point3d.Unset)
return Result.Nothing;
int direction = option_toggle.CurrentValue ? 1 : 0; // V : U
double u_parameter, v_parameter;
if (!surface.ClosestPoint(point, out u_parameter, out v_parameter)) return Result.Failure;
var iso_curve = surface.IsoCurve(direction, direction == 1 ? u_parameter : v_parameter);
if (iso_curve == null) return Result.Failure;
doc.Objects.AddCurve(iso_curve);
doc.Views.Redraw();
return Result.Success;
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Rhino.Input.Custom.GetOption go = new GetOption();
go.SetCommandPrompt("Set Faro scan settings");
Rhino.Input.Custom.GetString gs = new GetString();
gs.SetCommandPrompt("Set Faro IP address.");
gs.SetDefaultString("127.0.0.1");
gs.AddOption("Scanner IP");
gs.Get();
string val = gs.StringResult();
Rhino.RhinoApp.WriteLine("IP: " + val);
// set up the options
Rhino.Input.Custom.OptionInteger intOption = new Rhino.Input.Custom.OptionInteger(1, 1, 99);
Rhino.Input.Custom.OptionDouble dblOption = new Rhino.Input.Custom.OptionDouble(2.2, 0, 99.9);
Rhino.Input.Custom.OptionToggle boolOption = new Rhino.Input.Custom.OptionToggle(true, "Off", "On");
string[] resolutionValues = new string[] { "Full", "Half", "Quarter", "Eighth", "Sixsteenth" };
string[] measurementValues = new string[] { "Low", "Medium", "High" };
string[] noiseValues = new string[] { "Low", "Medium", "High" };
go.AddOptionInteger("Integer", ref intOption);
go.AddOptionDouble("Double", ref dblOption);
go.AddOptionToggle("Boolean", ref boolOption);
int resolutionIndex = 2;
int measurementIndex = 1;
int noiseIndex = 1;
int resolutionList = go.AddOptionList("Resolution", resolutionValues, resolutionIndex);
int measurementList = go.AddOptionList("MeasurementRate", measurementValues, measurementIndex);
int noiseList = go.AddOptionList("NoiseCompression", noiseValues, noiseIndex);
while (true)
{
// perform the get operation. This will prompt the user to input a point, but also
// allow for command line options defined above
Rhino.Input.GetResult get_rc = go.Get();
Rhino.RhinoApp.WriteLine(get_rc.ToString());
if (go.CommandResult() != Rhino.Commands.Result.Success)
{
return(go.CommandResult());
}
if (get_rc == Rhino.Input.GetResult.Nothing)
{
//doc.Objects.AddPoint(go.Point());
doc.Views.Redraw();
Rhino.RhinoApp.WriteLine("Command line option values are");
Rhino.RhinoApp.WriteLine(" Integer = {0}", intOption.CurrentValue);
Rhino.RhinoApp.WriteLine(" Double = {0}", dblOption.CurrentValue);
Rhino.RhinoApp.WriteLine(" Boolean = {0}", boolOption.CurrentValue);
Rhino.RhinoApp.WriteLine(" Measurement rate = {0}", measurementValues[measurementIndex]);
Rhino.RhinoApp.WriteLine(" Resolution = {0}", resolutionValues[resolutionIndex]);
}
else if (get_rc == Rhino.Input.GetResult.Option)
{
if (go.OptionIndex() == resolutionList)
{
resolutionIndex = go.Option().CurrentListOptionIndex;
}
else if (go.OptionIndex() == measurementList)
{
measurementIndex = go.Option().CurrentListOptionIndex;
}
continue;
}
break;
}
return(Rhino.Commands.Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
double tolerance = doc.ModelAbsoluteTolerance;
List <Curve> curves = new List <Curve>();
//Select surface
GetObject gs = new Rhino.Input.Custom.GetObject();
gs.SetCommandPrompt("Surface to orient on");
gs.GeometryFilter = Rhino.DocObjects.ObjectType.Surface;
gs.SubObjectSelect = true;
gs.DeselectAllBeforePostSelect = true;
gs.OneByOnePostSelect = true;
gs.Get();
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
Rhino.DocObjects.ObjRef objref_Surface = gs.Object(0);
Rhino.DocObjects.RhinoObject obj = objref_Surface.Object();
if (obj == null)
{
return(Result.Failure);
}
surface = objref_Surface.Surface();
if (surface == null)
{
return(Result.Failure);
}
obj.Select(false);
//Select Line(s)
GetObject gl = new GetObject();
gl.SetCommandPrompt("Select one or two line(s)");
gl.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
gl.DeselectAllBeforePostSelect = true;
gl.OneByOnePostSelect = true;
gl.GetMultiple(1, 0);
for (int i = 0; i < gl.ObjectCount; i++)
{
Rhino.DocObjects.ObjRef objref_Line = gl.Object(i);
curve = objref_Line.Curve();
Curve curveRe = curve.Rebuild(60, 3, true);
curves.Add(curveRe);
}
List <Guid> cir_guid_list = new List <Guid>();
if (curves.Count > 1)
{
Curve curve2 = curves[0];
Curve curve3 = curves[1];
if (curve2.IsClosed || curve3.IsClosed)
{
Rhino.UI.Dialogs.ShowMessage("Please only select open curves for two line pave.", "Warning!");
return(Result.Failure);
}
while (true)
{
cir_guid_list = new List <Guid>();
var tweenCurves = Curve.CreateTweenCurvesWithSampling(curve2, curve3, 1, 30, tolerance);
Curve tCurve = tweenCurves[0];
//3 point circle
Point3d po1 = curve2.PointAtStart;
Point3d po2 = curve3.PointAtStart;
LineCurve line1 = new LineCurve(po1, po2);
double[] param = line1.DivideByCount(2, false);
double param1 = param[0];
double param2 = param[0];
double param3 = param[0];
Curve curve1 = line1;
while (true)
{
Circle outCircle = Circle.TryFitCircleTTT(curve1, curve2, curve3, param1, param2, param3);
//circle normal to surface
Point3d outCircleCenter = outCircle.Center;
double outCircleRadius = outCircle.Radius;
double u, v;
surface.ClosestPoint(outCircleCenter, out u, out v);
var direction = surface.NormalAt(u, v);
Point3d surfCenter = surface.PointAt(u, v);
Plane pl1 = new Plane(surfCenter, direction);
Circle circle = new Circle(pl1, surfCenter, outCircleRadius - offSetStone);
Circle circleDist = new Circle(pl1, surfCenter, outCircleRadius + stoneDist);
Guid cir_guid = doc.Objects.AddCircle(circle);
cir_guid_list.Add(cir_guid);
//Cut tween curve at latest circle center
Point3d pointOnCurve;
Point3d pointOnCircle;
Curve circleDistCurve = circleDist.ToNurbsCurve();
tCurve.Domain = new Interval(0, tCurve.GetLength());
Curve[] splitCurves = tCurve.Split(outCircleRadius);
if (splitCurves is null)
{
break;
}
tCurve = splitCurves[splitCurves.Length - 1];
tCurve.ClosestPoints(circleDistCurve, out pointOnCurve, out pointOnCircle);
//Cut tween curve at latest circle border
double curveSplitParam;
tCurve.Domain = new Interval(0, tCurve.GetLength());
tCurve.ClosestPoint(pointOnCurve, out curveSplitParam);
splitCurves = tCurve.Split(curveSplitParam);
if (splitCurves is null)
{
break;
}
tCurve = splitCurves[splitCurves.Length - 1];
//New parameter at curve1
double circleParam;
circleDistCurve.ClosestPoint(pointOnCircle, out circleParam);
param1 = circleParam;
curve1 = circleDistCurve;
//New parameter at curves[0]
double paramCurve0New;
curve2.ClosestPoint(pointOnCircle, out paramCurve0New);
Point3d pointCurve0New = curve2.PointAt(paramCurve0New);
double distNewPoints0 = pointOnCircle.DistanceTo(pointCurve0New);
param2 = paramCurve0New + distNewPoints0;
//New parameter at curves[1]
double paramCurve1New;
curve3.ClosestPoint(pointOnCircle, out paramCurve1New);
Point3d pointCurve1New = curve3.PointAt(paramCurve1New);
double distNewPoints1 = pointOnCircle.DistanceTo(pointCurve1New);
param3 = paramCurve1New + distNewPoints1;
}
doc.Views.Redraw();
//Options
var go = new GetOption();
go.SetCommandPrompt("Set options.");
var stoneOff = new Rhino.Input.Custom.OptionDouble(offSetStone);
var distStone = new Rhino.Input.Custom.OptionDouble(stoneDist);
var boolOption = new Rhino.Input.Custom.OptionToggle(false, "Off", "On");
go.AddOptionDouble("Offset", ref stoneOff);
go.AddOptionDouble("Distance", ref distStone);
go.AddOptionToggle("Reverse", ref boolOption);
go.AcceptNothing(true);
var res = go.Get();
if (res == GetResult.Nothing)
{
break;
}
if (res == GetResult.Cancel)
{
break;
}
foreach (var gui in cir_guid_list)
{
var gu = doc.Objects.Find(gui);
doc.Objects.Delete(gu);
}
offSetStone = stoneOff.CurrentValue;
stoneDist = distStone.CurrentValue;
optionBool = boolOption.CurrentValue;
if (optionBool == true)
{
curve2.Reverse();
curve2 = curve2.Rebuild(60, 3, false);
curve3.Reverse();
curve3 = curve3.Rebuild(60, 3, false);
optionBool = false;
}
}
}
else
{
while (true)
{
cir_guid_list = new List <Guid>();
List <Point3d> points = new List <Point3d>();
double length = (diamStone / 2) + offSetStone;
double crv_length = curve.GetLength();
Point3d point = curve.PointAtLength(length);
points.Add(point);
while (true)
{
length += diamStone + offSetStone;
if (length > crv_length)
{
break;
}
point = curve.PointAtLength(length);
points.Add(point);
}
foreach (var poi in points)
{
double u, v;
surface.ClosestPoint(poi, out u, out v);
var direction = surface.NormalAt(u, v);
double x = direction.X;
double y = direction.Y;
double z = direction.Z;
Vector3d vt1 = new Vector3d(x, y, z);
Plane pl1 = new Plane(poi, vt1);
Circle circle = new Circle(pl1, poi, diamStone / 2);
Guid cir_guid = doc.Objects.AddCircle(circle);
cir_guid_list.Add(cir_guid);
}
doc.Views.Redraw();
//Options
var go = new GetOption();
go.SetCommandPrompt("Set options.");
var stoneDiam = new Rhino.Input.Custom.OptionDouble(diamStone);
var stoneOff = new Rhino.Input.Custom.OptionDouble(offSetStone);
var boolOption = new Rhino.Input.Custom.OptionToggle(false, "Off", "On");
go.AddOptionDouble("StoneDiam", ref stoneDiam);
go.AddOptionDouble("Offset", ref stoneOff);
go.AddOptionToggle("Reverse", ref boolOption);
go.AcceptNothing(true);
var res = go.Get();
if (res == GetResult.Nothing)
{
break;
}
if (res == GetResult.Cancel)
{
break;
}
foreach (var gui in cir_guid_list)
{
var gu = doc.Objects.Find(gui);
doc.Objects.Delete(gu);
}
diamStone = stoneDiam.CurrentValue;
offSetStone = stoneOff.CurrentValue;
optionBool = boolOption.CurrentValue;
if (optionBool == true)
{
curve.Reverse();
}
}
}
doc.Views.Redraw();
doc.Groups.Add(cir_guid_list);
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
points.Clear();
while (true)
{
m_escape_key_pressed = false;
RhinoApp.EscapeKeyPressed += RhinoApp_EscapeKeyPressed;
bool undo = false;
Point3d pt0;
Point3d pt0M;
int insert;
GetPoint getPoint = new GetPoint();
getPoint.SetCommandPrompt("Please select point");
var boolOptionAxis = new Rhino.Input.Custom.OptionToggle(front, "Front", "Side");
getPoint.AddOptionToggle("MirrorPlane", ref boolOptionAxis);
var boolOption = new Rhino.Input.Custom.OptionToggle(clamped, "Off", "On");
getPoint.AddOptionToggle("Closed", ref boolOption);
var undoOption = new Rhino.Input.Custom.OptionToggle(undo, "No", "Yes");
getPoint.AddOptionToggle("Undo", ref undoOption);
if (points.Count > 1)
{
getPoint.DynamicDraw += DynDrawCurve;
}
getPoint.AcceptNothing(true);
GetResult gr = getPoint.Get();
if (gr == GetResult.Nothing)
{
break;
}
else if (gr == GetResult.Option)
{
clamped = boolOption.CurrentValue;
front = boolOptionAxis.CurrentValue;
undo = undoOption.CurrentValue;
if (front == false)
{
xm = -1;
ym = 1;
}
else if (front)
{
xm = 1;
ym = -1;
}
if (undo)
{
points.RemoveAt(points.Count / 2);
points.RemoveAt(points.Count / 2);
}
}
else if (gr == GetResult.Point)
{
pt0 = getPoint.Point();
pt0M = new Point3d(xm * pt0.X, ym * pt0.Y, pt0.Z);
insert = points.Count / 2;
points.Insert(insert, pt0);
points.Insert(insert + 1, pt0M);
}
if (m_escape_key_pressed)
{
break;
}
}
NurbsCurve nc = NurbsCurve.Create(clamped, 3, points);
RhinoApp.EscapeKeyPressed -= RhinoApp_EscapeKeyPressed;
doc.Objects.AddCurve(nc);
doc.Views.Redraw();
return(Result.Success);
}
private static void ReadOptions(OptionToggle toggleVerbose, OptionToggle toggleInteractive,
OptionDouble spotlightFactor, OptionDouble pointlightFactor, OptionDouble sunlightFactor,
OptionDouble arealightFactor, OptionDouble polishFactor)
{
RcCore.It.EngineSettings.Verbose = toggleVerbose.CurrentValue;
RcCore.It.EngineSettings.UseInteractiveRenderer = toggleInteractive.CurrentValue;
RcCore.It.EngineSettings.SpotlightFactor = (float) spotlightFactor.CurrentValue;
RcCore.It.EngineSettings.PointlightFactor = (float) pointlightFactor.CurrentValue;
RcCore.It.EngineSettings.SunlightFactor = (float) sunlightFactor.CurrentValue;
RcCore.It.EngineSettings.ArealightFactor = (float) arealightFactor.CurrentValue;
RcCore.It.EngineSettings.PolishFactor = (float) polishFactor.CurrentValue;
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
SearchMode sm = SearchMode.CurveLength;
Curve[] curves;
OptionToggle tog = new OptionToggle(false, "Hide", "Show");
OptionDouble tol = new OptionDouble(RhinoDoc.ActiveDoc.ModelAbsoluteTolerance, true, 0.0);
using (CurvesGetter getLines = new CurvesGetter("Select curves meeting at endpoints. Press Enter when done"))
{
for( ; ;)
{
getLines.ClearCommandOptions();
getLines.EnableClearObjectsOnEntry(false);
int showInt = getLines.AddOptionToggle("Topology", ref tog);
int tolInt = getLines.AddOptionDouble("Tolerance", ref tol);
int modeInt = GetterExtension.AddEnumOptionList(getLines, sm);
if (getLines.Curves(1, 0, out curves))
break;
else
{
if (getLines.Result() == GetResult.Option)
{
if (getLines.Option().Index == modeInt)
{
sm = GetterExtension.RetrieveEnumOptionValue<SearchMode>
(getLines.Option().CurrentListOptionIndex);
}
continue;
}
else
{
RhinoApp.WriteLine("Less than three lines were selected");
return Result.Cancel;
}
}
}
}
CurvesTopology crvTopology = new CurvesTopology(curves, tol.CurrentValue);
Guid[] ids = null;
if (tog.CurrentValue)
ids = CurvesTopologyPreview.Mark(crvTopology, Color.LightBlue, Color.LightCoral);
int walkFromIndex;
using (var getStart = new TrackingPointGetter("Select the start point of the walk on the curves", crvTopology))
{
if (getStart.GetPointOnTopology(out walkFromIndex) != Result.Success)
{
EndOperations(ids);
return Result.Cancel;
}
}
Result wasSuccessful = Result.Cancel;
for (; ; )
{
int walkToIndex;
double[] distances;
using (var getEnd = new TrackingPointGetter("Select the end point", crvTopology, walkFromIndex, sm))
{
if (getEnd.GetPointOnTopology(out walkToIndex) != Result.Success)
{
break;
}
distances = getEnd.DistanceCache;
}
if (walkFromIndex == walkToIndex)
{
RhinoApp.WriteLine("Start and end points are equal");
EndOperations(ids);
return Result.Nothing;
}
PathMethod pathSearch = PathMethod.FromMode(sm, crvTopology, distances);
int[] nIndices, eIndices;
bool[] eDirs;
double totLength;
Curve c =
pathSearch.Cross(walkFromIndex, walkToIndex, out nIndices, out eIndices, out eDirs, out totLength);
if (c != null && c.IsValid)
{
if (tog.CurrentValue)
{
RhinoApp.WriteLine("Vertices: {0}", FormatNumbers(nIndices));
RhinoApp.WriteLine("Edges: {0}", FormatNumbers(eIndices));
}
var a = RhinoDoc.ActiveDoc.CreateDefaultAttributes();
Guid g = RhinoDoc.ActiveDoc.Objects.AddCurve(c, a);
var obj = RhinoDoc.ActiveDoc.Objects.Find(g);
if (obj != null)
{
obj.Select(true);
wasSuccessful = Result.Success;
walkFromIndex = walkToIndex;
}
else
{
RhinoApp.WriteLine("An error occurred while adding the new polycurve.");
wasSuccessful = Result.Failure;
break;
}
}
else
{
RhinoApp.WriteLine("No path was found. Nodes are isolated.");
wasSuccessful = Result.Nothing;
}
}
EndOperations(ids);
return wasSuccessful;
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Mesh meshSurf;
List <Guid> ids = new List <Guid>();
double tolerance = doc.ModelAbsoluteTolerance;
const Rhino.DocObjects.ObjectType geometryFilter = Rhino.DocObjects.ObjectType.Surface |
Rhino.DocObjects.ObjectType.PolysrfFilter |
Rhino.DocObjects.ObjectType.Mesh;
GetObject gs = new Rhino.Input.Custom.GetObject();
gs.SetCommandPrompt("Surface to orient on");
gs.GeometryFilter = geometryFilter;
gs.SubObjectSelect = true;
gs.DeselectAllBeforePostSelect = true;
gs.OneByOnePostSelect = true;
gs.Get();
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
Rhino.DocObjects.ObjRef objref = gs.Object(0);
Rhino.DocObjects.RhinoObject obj = objref.Object();
if (obj == null)
{
return(Result.Failure);
}
brepSurf = objref.Brep();
if (brepSurf == null)
{
meshSurf = objref.Mesh();
brepSurf = Brep.CreateFromMesh(meshSurf, true);
}
if (brepSurf == null)
{
return(Result.Failure);
}
obj.Select(false);
while (true)
{
w_key_pressed = false;
s_key_pressed = false;
a_key_pressed = false;
d_key_pressed = false;
m_escape_key_pressed = false;
RhinoApp.EscapeKeyPressed += RhinoApp_EscapeKeyPressed;
RhinoApp.KeyboardEvent += OnRhinoKeyboardEvent;
Point3d pt0;
GetPoint getPointAction = new GetPoint();
getPointAction.SetCommandPrompt("Please select insert point(s) on surface.");
getPointAction.Constrain(brepSurf, -1, -1, false);
var stoneDiam = new Rhino.Input.Custom.OptionDouble(diamStone);
var stoneOff = new Rhino.Input.Custom.OptionDouble(offSetStone);
var boolOption = new Rhino.Input.Custom.OptionToggle(false, "Off", "On");
var moveOption = new Rhino.Input.Custom.OptionToggle(false, "Off", "On");
getPointAction.AddOptionDouble("StoneDiam", ref stoneDiam);
getPointAction.AddOptionDouble("Offset", ref stoneOff);
getPointAction.AddOptionToggle("Delete", ref boolOption);
getPointAction.AddOptionToggle("Move", ref moveOption);
getPointAction.DynamicDraw += RefCircleDraw;
getPointAction.Tag = obj;
getPointAction.AcceptString(false);
getPointAction.AcceptNothing(true);
var res = getPointAction.Get();
if (w_key_pressed || s_key_pressed)
{
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
w_key_pressed = false;
s_key_pressed = false;
stoneDiam.CurrentValue = diamStone;
}
if (a_key_pressed || d_key_pressed)
{
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
a_key_pressed = false;
d_key_pressed = false;
stoneOff.CurrentValue = offSetStone;
}
if (res == GetResult.Nothing)
{
break;
}
if (m_escape_key_pressed)
{
break;
}
diamStone = stoneDiam.CurrentValue;
offSetStone = stoneOff.CurrentValue;
optionBool = boolOption.CurrentValue;
moveBool = moveOption.CurrentValue;
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
if (moveBool == true)
{
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
while (true)
{
GetObject gcd = new Rhino.Input.Custom.GetObject();
gcd.SetCommandPrompt("Select circle(s) to move. Press enter when done");
gcd.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
gcd.SubObjectSelect = false;
gcd.DeselectAllBeforePostSelect = true;
gcd.AcceptNothing(true);
if (gcd.Get() == GetResult.Nothing)
{
break;
}
gcd.Get();
Rhino.DocObjects.ObjRef delobjref = gcd.Object(0);
Rhino.DocObjects.RhinoObject delobj = delobjref.Object();
Curve curveRadius = delobjref.Curve();
Circle circleRadius = new Circle();
curveRadius.TryGetCircle(out circleRadius, tolerance);
diamStone = circleRadius.Diameter;
doc.Objects.Delete(delobj, true);
doc.Views.Redraw();
getPointAction.Get();
pt0 = getPointAction.Point();
Point3d closestPoint;
ComponentIndex compIndex;
double u, v;
Vector3d vt1;
brepSurf.ClosestPoint(pt0, out closestPoint, out compIndex, out u, out v, 0.01, out vt1);
Plane pl1 = new Plane(pt0, vt1);
Circle cr1 = new Circle(pl1, pt0, diamStone / 2);
var crgu = doc.Objects.AddCircle(cr1);
ids.Add(crgu);
doc.Views.Redraw();
}
moveBool = false;
}
if (optionBool == true)
{
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
while (true)
{
GetObject gcd = new Rhino.Input.Custom.GetObject();
gcd.SetCommandPrompt("Select circle(s) to delete. Press enter when done");
gcd.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
gcd.SubObjectSelect = false;
gcd.DeselectAllBeforePostSelect = true;
gcd.AcceptNothing(true);
if (gcd.Get() == GetResult.Nothing)
{
break;
}
gcd.Get();
Rhino.DocObjects.ObjRef delobjref = gcd.Object(0);
Rhino.DocObjects.RhinoObject delobj = delobjref.Object();
Curve curveRadius = delobjref.Curve();
Circle circleRadius = new Circle();
curveRadius.TryGetCircle(out circleRadius, tolerance);
diamStone = circleRadius.Diameter;
doc.Objects.Delete(delobj, true);
doc.Views.Redraw();
}
optionBool = false;
}
if (res == GetResult.Point)
{
pt0 = getPointAction.Point();
Point3d closestPoint;
ComponentIndex compIndex;
double u, v;
Vector3d vt1;
brepSurf.ClosestPoint(pt0, out closestPoint, out compIndex, out u, out v, 0.01, out vt1);
Plane pl1 = new Plane(pt0, vt1);
Circle cr1 = new Circle(pl1, pt0, diamStone / 2);
var crgu = doc.Objects.AddCircle(cr1);
ids.Add(crgu);
doc.Views.Redraw();
}
}
RhinoApp.KeyboardEvent -= OnRhinoKeyboardEvent;
RhinoApp.EscapeKeyPressed -= RhinoApp_EscapeKeyPressed;
doc.Groups.Add(ids);
return(Result.Success);
}
protected override Rhino.Commands.Result RunCommand(RhinoDoc doc, Rhino.Commands.RunMode mode)
{
Rhino.DocObjects.ObjRef objref;
var rc = Rhino.Input.RhinoGet.GetOneObject("Select object", true, Rhino.DocObjects.ObjectType.AnyObject, out objref);
if (rc != Rhino.Commands.Result.Success)
return rc;
rc = Rhino.Input.RhinoGet.GetPoint("Start point", false, out m_point_start);
if (rc != Rhino.Commands.Result.Success)
return rc;
var obj = objref.Object();
if (obj == null)
return Rhino.Commands.Result.Failure;
// create an instance of a GetPoint class and add a delegate
// for the DynamicDraw event
var gp = new Rhino.Input.Custom.GetPoint();
gp.DrawLineFromPoint(m_point_start, true);
var optdouble = new Rhino.Input.Custom.OptionDouble(m_distance);
bool constrain = false;
var optconstrain = new Rhino.Input.Custom.OptionToggle(constrain, "Off", "On");
gp.AddOptionDouble("Distance", ref optdouble);
gp.AddOptionToggle("Constrain", ref optconstrain);
gp.DynamicDraw += ArrayByDistanceDraw;
gp.Tag = obj;
while (gp.Get() == Rhino.Input.GetResult.Option)
{
m_distance = optdouble.CurrentValue;
if (constrain != optconstrain.CurrentValue)
{
constrain = optconstrain.CurrentValue;
if (constrain)
{
var gp2 = new Rhino.Input.Custom.GetPoint();
gp2.DrawLineFromPoint(m_point_start, true);
gp2.SetCommandPrompt("Second point on constraint line");
if (gp2.Get() == Rhino.Input.GetResult.Point)
gp.Constrain(m_point_start, gp2.Point());
else
{
gp.ClearCommandOptions();
optconstrain.CurrentValue = false;
constrain = false;
gp.AddOptionDouble("Distance", ref optdouble);
gp.AddOptionToggle("Constrain", ref optconstrain);
}
}
else
{
gp.ClearConstraints();
}
}
}
if (gp.CommandResult() == Rhino.Commands.Result.Success)
{
m_distance = optdouble.CurrentValue;
var pt = gp.Point();
var vec = pt - m_point_start;
double length = vec.Length;
vec.Unitize();
int count = (int)(length / m_distance);
for (int i = 1; i < count; i++)
{
var translate = vec * (i * m_distance);
var xf = Rhino.Geometry.Transform.Translation(translate);
doc.Objects.Transform(obj, xf, false);
}
doc.Views.Redraw();
}
return gp.CommandResult();
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
double tolerance = doc.ModelAbsoluteTolerance;
double angleTolerance = doc.ModelAngleToleranceRadians;
List <Curve> icur = new List <Curve>();
GetObject gcr = new Rhino.Input.Custom.GetObject();
gcr.SetCommandPrompt("Select reference circles for prongs. (No curves)");
gcr.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
gcr.GroupSelect = true;
gcr.SubObjectSelect = true;
gcr.DeselectAllBeforePostSelect = true;
gcr.OneByOnePostSelect = false;
gcr.GetMultiple(1, 0);
for (int ie = 0; ie < gcr.ObjectCount; ie++)
{
Rhino.DocObjects.ObjRef objref = gcr.Object(ie);
Rhino.DocObjects.RhinoObject obj = objref.Object();
if (obj == null)
{
return(Result.Failure);
}
Curve refcr = objref.Curve();
if (refcr == null)
{
return(Result.Failure);
}
obj.Select(false);
icur.Add(refcr);
}
while (true)
{
m_escape_key_pressed = false;
RhinoApp.EscapeKeyPressed += RhinoApp_EscapeKeyPressed;
Point3d pt0 = new Point3d(0, 0, hight);
Point3d pt1 = new Point3d(0, 0, -(length - hight));
double rotationRadiant = ((rotation / 180) * 3.1415);
List <Point3d> curvePoints = new List <Point3d>()
{
pt0, pt1
};
Curve prongCurve = Curve.CreateInterpolatedCurve(curvePoints, 3);
if (!capBool)
{
capMode = PipeCapMode.Flat;
}
else if (capBool)
{
capMode = PipeCapMode.Round;
}
Brep[] cylBrep1 = Brep.CreatePipe(prongCurve, prongDia / 2, false, capMode, false, tolerance, angleTolerance);
Brep cylBrep2 = cylBrep1[0];
cylBrep2.Faces.RemoveAt(2);
Brep cylBrep3 = cylBrep2.CapPlanarHoles(tolerance);
if (capBool)
{
Vector3d scaleVec = new Vector3d(0, 0, 1);
var scalePlane = new Plane(pt0, scaleVec);
var capScale = Transform.Scale(scalePlane, 1.0, 1.0, capHight);
var surf2 = cylBrep3.Faces[1].UnderlyingSurface();
NurbsSurface nurbSurf2 = surf2.ToNurbsSurface();
nurbSurf2.Transform(capScale);
Brep capBrep = nurbSurf2.ToBrep();
cylBrep3.Append(capBrep);
cylBrep3.Faces.RemoveAt(1);
}
cylBrep3.Compact();
cylBrep3.JoinNakedEdges(tolerance);
string instDefCount = DateTime.Now.ToString("ddMMyyyyHHmmss");
Brep[] brepArray = new Brep[1] {
cylBrep3
};
var prongIndex = doc.InstanceDefinitions.Add("Prong" + instDefCount, "RefProng", Point3d.Origin, brepArray);
foreach (Curve c in icur)
{
Circle circleProngs = new Circle();
c.TryGetCircle(out circleProngs, tolerance);
NurbsCurve curveProngs = circleProngs.ToNurbsCurve();
Plane planeNew = circleProngs.Plane;
Vector3d plVec = planeNew.Normal;
if (planeNew == null)
{
curveProngs.DivideByCount(3, true, out Point3d[] curveProngsPoints);
planeNew = new Plane(curvePoints[0], curveProngsPoints[1], curveProngsPoints[2]);
}
Curve[] offsetCurveArray = curveProngs.Offset(planeNew, prongDia / 4, tolerance, CurveOffsetCornerStyle.Sharp);
Curve offsetCurve = offsetCurveArray[0];
double[] segParameters = offsetCurve.DivideByCount(prongCount, true);
List <Point3d> prongPoints = new List <Point3d>();
List <Guid> idsInter = new List <Guid>();
foreach (double p in segParameters)
{
Point3d zen = new Point3d(0, 0, 0);
Point3d prongPoint = offsetCurve.PointAt(p);
Point3d center = circleProngs.Center;
Vector3d moveV = new Vector3d(prongPoint);
Vector3d zaxis = new Vector3d(0.0, 0.0, 1.0);
Plane planeOr = new Plane(zen, zaxis);
Plane plane = new Plane(prongPoint, plVec);
var transform1 = Transform.PlaneToPlane(planeOr, plane);
var transform2 = Transform.Rotation(rotationRadiant, plVec, center);
var prongA = doc.Objects.AddInstanceObject(prongIndex, transform1);
var prongB = doc.Objects.Transform(prongA, transform2, true);
ids.Add(prongB);
}
doc.Views.Redraw();
}
GetOption go = new Rhino.Input.Custom.GetOption();
go.SetCommandPrompt("Set prong parameters.");
go.AcceptNothing(true);
var countProng = new Rhino.Input.Custom.OptionInteger(prongCount);
var diaProng = new Rhino.Input.Custom.OptionDouble(prongDia);
var hightProng = new Rhino.Input.Custom.OptionDouble(hight);
var lengthProng = new Rhino.Input.Custom.OptionDouble(length);
var rotProng = new Rhino.Input.Custom.OptionDouble(rotation);
var capProng = new Rhino.Input.Custom.OptionToggle(capBool, "Flat", "Round");
var hightCap = new Rhino.Input.Custom.OptionDouble(capHight);
go.AddOptionInteger("Count", ref countProng);
go.AddOptionDouble("Diameter", ref diaProng);
go.AddOptionDouble("Hight", ref hightProng);
go.AddOptionDouble("Length", ref lengthProng);
go.AddOptionDouble("Rotation", ref rotProng);
go.AddOptionToggle("Cap", ref capProng);
if (capBool)
{
go.AddOptionDouble("Caphight", ref hightCap);
}
GetResult res = go.Get();
if (m_escape_key_pressed)
{
break;
}
hight = hightProng.CurrentValue;
length = lengthProng.CurrentValue;
prongCount = countProng.CurrentValue;
prongDia = diaProng.CurrentValue;
rotation = rotProng.CurrentValue;
capBool = capProng.CurrentValue;
capHight = hightCap.CurrentValue;
if (length <= 0.0)
{
length = 1.0;
}
if (prongCount <= 0)
{
prongCount = 1;
}
if (prongDia <= 0.0)
{
prongDia = 1.0;
}
if (res == GetResult.Nothing)
{
break;
}
doc.Objects.Delete(ids, true);
}
RhinoApp.EscapeKeyPressed -= RhinoApp_EscapeKeyPressed;
doc.Groups.Add(ids);
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
//pick surface to orient to or block instance to relocate
GetObject gs = new Rhino.Input.Custom.GetObject();
gs.SetCommandPrompt("Surface to orient new object on or BlockInstance to move");
gs.GeometryFilter = Rhino.DocObjects.ObjectType.Surface | Rhino.DocObjects.ObjectType.InstanceReference;
gs.SubObjectSelect = true;
gs.DeselectAllBeforePostSelect = false;
gs.OneByOnePostSelect = true;
gs.Get();
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
Rhino.DocObjects.ObjRef objref = gs.Object(0);
Rhino.DocObjects.RhinoObject obj = objref.Object();
if (obj == null)
{
return(Result.Failure);
}
surface = objref.Surface();
//relocate block instance
if (surface == null)
{
Rhino.DocObjects.InstanceObject instance1 = objref.Object() as Rhino.DocObjects.InstanceObject;
instancePoint = instance1.InsertionPoint;
double g, h;
surface2.ClosestPoint(instancePoint, out g, out h);
var instanceDirection = surface2.NormalAt(g, h);
instancePlane = new Plane(instancePoint, instanceDirection);
Rhino.Input.Custom.GetPoint gpss = new Rhino.Input.Custom.GetPoint();
gpss.SetCommandPrompt("Point on surface to orient to");
gpss.Constrain(surface2, false);
gpss.DynamicDraw += RefObjDraw;
gpss.Tag = instance1;
gpss.Get();
if (gpss.CommandResult() != Rhino.Commands.Result.Success)
{
return(gpss.CommandResult());
}
Point3d ptss = gpss.Point();
surface2.ClosestPoint(ptss, out g, out h);
var direction1 = surface2.NormalAt(g, h);
Plane pl11 = new Plane(ptss, direction1);
Transform iform = Rhino.Geometry.Transform.PlaneToPlane(instancePlane, pl11);
doc.Objects.Transform(instance1, iform, true);
return(Result.Success);
}
obj.Select(false);
//pick objekt to orient
var copy = new Rhino.Input.Custom.OptionToggle(false, "No", "Yes");
GetObject go = new GetObject();
go.SetCommandPrompt("Select object to orient.");
go.AddOptionToggle("Copy", ref copy);
go.SubObjectSelect = true;
go.DeselectAllBeforePostSelect = false;
go.GroupSelect = true;
for (; ;)
{
var res = go.GetMultiple(1, -1);
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
if (res == GetResult.Option)
{
copyBol = copy.CurrentValue;
continue;
}
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
break;
}
int obCount = go.ObjectCount;
string instDefCount = DateTime.Now.ToString("ddMMyyyyHHmmss");
//create block instance and plane for instance
Rhino.Input.Custom.GetPoint gp = new Rhino.Input.Custom.GetPoint();
gp.SetCommandPrompt("Point to orient from");
gp.Get();
if (gp.CommandResult() != Rhino.Commands.Result.Success)
{
return(gp.CommandResult());
}
Vector3d vt1 = new Vector3d(0, 0, 1);
Point3d pt1 = gp.Point();
sourcePlane = new Plane(pt1, vt1);
Plane originPlane = new Plane(Point3d.Origin, vt1);
Transform bform = Rhino.Geometry.Transform.PlaneToPlane(sourcePlane, originPlane);
//block instance
GeometryBase[] obj1List = new GeometryBase[obCount];
List <Brep> opList = new List <Brep>();
for (int igo = 0; igo < obCount; igo++)
{
Rhino.DocObjects.ObjRef objref1 = go.Object(igo);
Rhino.DocObjects.RhinoObject obj1 = objref1.Object();
if (obj == null)
{
return(Result.Failure);
}
obj.Select(false);
Rhino.Geometry.Brep opItem = objref1.Brep();
opList.Add(opItem);
GeometryBase obj1Base = obj1.Geometry;
obj1Base.Transform(bform);
obj1List[igo] = obj1Base;
}
var orientBlock = doc.InstanceDefinitions.Add("Block" + instDefCount, "OrientBlock", Point3d.Origin, obj1List);
//get all go.Objects to .Tag
Brep[] op = new Brep[obCount];
op = Brep.CreateBooleanUnion(opList, 0.01);
Brep od = new Brep();
od = op[0];
var odGuid = doc.Objects.AddBrep(od);
Rhino.DocObjects.ObjRef objref2 = new Rhino.DocObjects.ObjRef(odGuid);
Rhino.DocObjects.RhinoObject objDrw = objref2.Object();
//orient plane to surface
if (copyBol)
{
while (true)
{
Rhino.Input.Custom.GetPoint gps = new Rhino.Input.Custom.GetPoint();
gps.SetCommandPrompt("Point on surface to orient to. Press enter when done.");
gps.Constrain(surface, false);
gps.AcceptNothing(true);
gps.DynamicDraw += RefObjDraw;
gps.Tag = objDrw;
var res = gps.Get();
if (res == GetResult.Nothing)
{
break;
}
//else if (gps.CommandResult() != Rhino.Commands.Result.Success)
// return gps.CommandResult();
Point3d pts = gps.Point();
double u, v;
surface.ClosestPoint(pts, out u, out v);
Vector3d direction = surface.NormalAt(u, v);
Plane pl1 = new Plane(pts, direction);
Rhino.Geometry.Transform xform = Rhino.Geometry.Transform.PlaneToPlane(originPlane, pl1);
doc.Objects.AddInstanceObject(orientBlock, xform);
doc.Objects.Delete(objDrw);
}
copyBol = false;
}
else
{
Rhino.Input.Custom.GetPoint gps = new Rhino.Input.Custom.GetPoint();
gps.SetCommandPrompt("Point on surface to orient to");
gps.Constrain(surface, false);
gps.DynamicDraw += RefObjDraw;
gps.Tag = objDrw;
gps.Get();
if (gps.CommandResult() != Rhino.Commands.Result.Success)
{
return(gps.CommandResult());
}
Point3d pts = gps.Point();
double u, v;
surface.ClosestPoint(pts, out u, out v);
Vector3d direction = surface.NormalAt(u, v);
Plane pl1 = new Plane(pts, direction);
Rhino.Geometry.Transform xform = Rhino.Geometry.Transform.PlaneToPlane(originPlane, pl1);
doc.Objects.AddInstanceObject(orientBlock, xform);
doc.Objects.Delete(objDrw);
}
surface2 = surface;
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var getNumber = new GetNumber();
getNumber.SetLowerLimit(2.0, false);
getNumber.SetUpperLimit(100000.0, false);
getNumber.SetDefaultInteger(RcCore.It.EngineSettings.Samples);
getNumber.SetCommandPrompt("Set render samples");
var useCustomSettings = new OptionToggle(RcCore.It.EngineSettings.UseCustomQualitySettings, "No", "Yes");
var minBounce = new OptionInteger(RcCore.It.EngineSettings.MinBounce, 0, 500);
var maxBounce = new OptionInteger(RcCore.It.EngineSettings.MaxBounce, 0, 500);
var maxDiffuseBounce = new OptionInteger(RcCore.It.EngineSettings.MaxDiffuseBounce, 0, 200);
var maxGlossyBounce = new OptionInteger(RcCore.It.EngineSettings.MaxGlossyBounce, 0, 200);
var maxTransmissionBounce = new OptionInteger(RcCore.It.EngineSettings.MaxTransmissionBounce, 0, 200);
var maxVolumeBounce = new OptionInteger(RcCore.It.EngineSettings.MaxVolumeBounce, 0, 200);
var noCaustics = new OptionToggle(RcCore.It.EngineSettings.NoCaustics, "Caustics", "NoCaustics");
var aaSamples = new OptionInteger(RcCore.It.EngineSettings.AaSamples, 1, 100);
var diffSamples = new OptionInteger(RcCore.It.EngineSettings.DiffuseSamples, 1, 100);
var glossySamples = new OptionInteger(RcCore.It.EngineSettings.GlossySamples, 1, 100);
var seed = new OptionInteger(RcCore.It.EngineSettings.Seed, 0, int.MaxValue);
var sensorWidth = new OptionDouble(RcCore.It.EngineSettings.SensorWidth, 10.0, 100.0);
var sensorHeight = new OptionDouble(RcCore.It.EngineSettings.SensorHeight, 10.0, 100.0);
var transparentMinBounce = new OptionInteger(RcCore.It.EngineSettings.TransparentMinBounce, 0, 200);
var transparentMaxBounce = new OptionInteger(RcCore.It.EngineSettings.TransparentMaxBounce, 0, 200);
var transparentShadows = new OptionToggle(RcCore.It.EngineSettings.TransparentShadows, "NoTransparentShadows", "TransparentShadows");
var branched = new OptionToggle(RcCore.It.EngineSettings.IntegratorMethod==IntegratorMethod.BranchedPath, "Path", "BranchedPath");
var samplingPattern = new OptionToggle(RcCore.It.EngineSettings.SamplingPattern == SamplingPattern.CMJ, "Sobol", "CMJ");
var filterGlossy = new OptionDouble(RcCore.It.EngineSettings.FilterGlossy, 0.0, 100.0);
var sampleClampDirect = new OptionDouble(RcCore.It.EngineSettings.SampleClampDirect, 0.0, 100.0);
var sampleClampIndirect = new OptionDouble(RcCore.It.EngineSettings.SampleClampIndirect, 0.0, 100.0);
var sampleAllLights = new OptionToggle(RcCore.It.EngineSettings.SampleAllLights, "no", "yes");
var sampleAllLightsIndirect = new OptionToggle(RcCore.It.EngineSettings.SampleAllLightsIndirect, "no", "yes");
getNumber.AddOptionToggle("use_custom_quality_settings", ref useCustomSettings);
getNumber.AddOptionInteger("min_bounces", ref minBounce);
getNumber.AddOptionInteger("max_bounces", ref maxBounce);
getNumber.AddOptionToggle("no_caustics", ref noCaustics);
getNumber.AddOptionInteger("max_diffuse_bounce", ref maxDiffuseBounce);
getNumber.AddOptionInteger("max_glossy_bounce", ref maxGlossyBounce);
getNumber.AddOptionInteger("max_transmission_bounce", ref maxTransmissionBounce);
getNumber.AddOptionInteger("max_volume_bounce", ref maxVolumeBounce);
getNumber.AddOptionInteger("transparent_min_bounce", ref transparentMinBounce);
getNumber.AddOptionInteger("transparent_max_bounce", ref transparentMaxBounce);
getNumber.AddOptionToggle("transparent_shadows", ref transparentShadows);
getNumber.AddOptionInteger("aa_samples", ref aaSamples);
getNumber.AddOptionInteger("diffuse_samples", ref diffSamples);
getNumber.AddOptionInteger("glossy_samples", ref glossySamples);
getNumber.AddOptionDouble("sensor_width", ref sensorWidth);
getNumber.AddOptionDouble("sensor_height", ref sensorHeight);
getNumber.AddOptionToggle("integrator_method", ref branched);
getNumber.AddOptionInteger("seed", ref seed, "Seed to use for sampling distribution");
getNumber.AddOptionToggle("sampling_pattern", ref samplingPattern);
getNumber.AddOptionDouble("filter_glossy", ref filterGlossy);
getNumber.AddOptionDouble("sample_clamp_direct", ref sampleClampDirect);
getNumber.AddOptionDouble("sample_clamp_indirect", ref sampleClampIndirect);
getNumber.AddOptionToggle("sample_all_lights", ref sampleAllLights);
getNumber.AddOptionToggle("sample_all_lights_indirect", ref sampleAllLightsIndirect);
while (true)
{
var getRc = getNumber.Get();
if (getNumber.CommandResult() != Result.Success) return getNumber.CommandResult();
switch (getRc)
{
case GetResult.Number:
RhinoApp.WriteLine($"We got: {getNumber.Number()}, {minBounce.CurrentValue}, {maxBounce.CurrentValue}");
RcCore.It.EngineSettings.Samples = (int)getNumber.Number();
RcCore.It.EngineSettings.UseCustomQualitySettings = useCustomSettings.CurrentValue;
RcCore.It.EngineSettings.Seed = seed.CurrentValue;
RcCore.It.EngineSettings.MaxBounce = maxBounce.CurrentValue;
RcCore.It.EngineSettings.MinBounce = minBounce.CurrentValue;
RcCore.It.EngineSettings.NoCaustics = noCaustics.CurrentValue;
RcCore.It.EngineSettings.MaxDiffuseBounce = maxDiffuseBounce.CurrentValue;
RcCore.It.EngineSettings.MaxGlossyBounce = maxGlossyBounce.CurrentValue;
RcCore.It.EngineSettings.MaxTransmissionBounce = maxTransmissionBounce.CurrentValue;
RcCore.It.EngineSettings.MaxVolumeBounce = maxVolumeBounce.CurrentValue;
RcCore.It.EngineSettings.TransparentMinBounce = transparentMinBounce.CurrentValue;
RcCore.It.EngineSettings.TransparentMaxBounce = transparentMaxBounce.CurrentValue;
RcCore.It.EngineSettings.TransparentShadows = transparentShadows.CurrentValue;
RcCore.It.EngineSettings.AaSamples = aaSamples.CurrentValue;
RcCore.It.EngineSettings.DiffuseSamples = diffSamples.CurrentValue;
RcCore.It.EngineSettings.GlossySamples = glossySamples.CurrentValue;
RcCore.It.EngineSettings.SensorWidth = (float)sensorWidth.CurrentValue;
RcCore.It.EngineSettings.SensorHeight = (float)sensorHeight.CurrentValue;
RcCore.It.EngineSettings.IntegratorMethod = branched.CurrentValue ? IntegratorMethod.BranchedPath : IntegratorMethod.Path;
RcCore.It.EngineSettings.SamplingPattern = SamplingPattern.Sobol;
RcCore.It.EngineSettings.FilterGlossy = 0.0f;
RcCore.It.EngineSettings.SampleClampDirect = 0.0f;
RcCore.It.EngineSettings.SampleClampIndirect = 0.0f;
RcCore.It.EngineSettings.SampleAllLights = true;
RcCore.It.EngineSettings.SampleAllLightsIndirect = true;
break;
case GetResult.Option:
continue;
}
break;
}
return Result.Success;
}