public void AddFixture(FixtureE fixture, SystemInfoElec systemInfo)
{
if (!ElecFixturesDic.ContainsKey(systemInfo))
{
ElecFixturesDic.Add(systemInfo, new List <FixtureE>());
}
ElecFixturesDic[systemInfo].Add(fixture);
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
#region The basic from Revit datebase.
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Autodesk.Revit.ApplicationServices.
Application app = uiapp.Application;
Document doc = uidoc.Document;
#endregion
List <Room> roomSelected = new List <Room>();
///Step1-Confirm the range of calculation.
///
///Ask the user for range of rooms to calculate.
///This is in case multiple houses or group of
///houses are in the same rvt files while their
///electircal system are seperate.
///
///The result will be in roomSelected as a list.
#region Code block of step-1
///Prepare the dialog to show later.
TaskDialog td = new TaskDialog("RoomSelection");
TaskDialogResult tdR;
string roomNames;
///Start selection.If retry button is hit,
///do the loop again.
do
{
///Cleare the result if retry is hit.
roomSelected.Clear();
roomNames = "";
///1-ask user to choose all rooms or not.
td.CommonButtons = TaskDialogCommonButtons.Yes
| TaskDialogCommonButtons.No;
td.MainInstruction = "Do you want to calculate " +
"electrical route for all rooms?\n" +
"If not,press no and select the rooms to " +
"calculate in the model afterward.\n" +
"是否为模型中所有房间计算电路路由？\n" +
"如果不是，选择no并随后在模型中选择需要计算的房间";
tdR = td.Show();
///2-Filter out the rooms selected.
try
{///If yes, than select all rooms in the project.
if (tdR == TaskDialogResult.Yes)
{
FilteredElementCollector colR =
new FilteredElementCollector(doc)
.WhereElementIsNotElementType()
.OfCategory(BuiltInCategory.OST_Rooms);
foreach (Element e in colR)
{
roomSelected.Add(e as Room);
roomNames += e.Name + "\n";
}
}
///If no, prompt the user to select.
///Using the SelFilterRoom to restrain
///the type of selection to room.
else if (tdR == TaskDialogResult.No)
{
IList <Element> elems = uidoc.Selection.
PickElementsByRectangle
(new SelFilterRoom(),
"Choose the room to calculate route.");
foreach (Element e in elems)
{
roomSelected.Add(e as Room);
roomNames += e.Name + "\n";
}
}
///If window is closed,stop the command.
else
{
return(Result.Failed);
}
}
catch (Exception e)
{
TaskDialog.Show("Error", "Something went wrong." +
"Detail infomation:\n" +
"命令出错，详细信息：\n" + e.Message);
return(Result.Failed);
}
///3-Confirm selection with user.
td.CommonButtons = TaskDialogCommonButtons.Yes
| TaskDialogCommonButtons.Retry
| TaskDialogCommonButtons.Cancel;
td.MainInstruction = "Rooms selected 选中房间:\n" +
roomNames + "continue?是否继续?";
td.DefaultButton = TaskDialogResult.Cancel;
tdR = td.Show();
///Choose result:
///Yes-Confirm the selection,break the loop.
///Cancel-Stop the command.
///Retry-Restart the selection process.
if (tdR == TaskDialogResult.Yes)
{
break;
}
if (tdR == TaskDialogResult.Cancel)
{
return(Result.Failed);
}
} while (tdR == TaskDialogResult.Retry);
#endregion
List <RoomInfoElec> roomInfoList
= new List <RoomInfoElec>();
List <SystemInfoElec> systemInfoList
= new List <SystemInfoElec>();
///Step2-Initialize the roominfos and systeminfos.
///
///RoomInfoElec is a custom built type to pre calculate
///and then store the geometry and node infomation
///of each room and contain function relative to
///electrical route calculation.
///
///SystemInfoElec is a cusstom built type to store
///the node and route infomation of an electrical circuit.
///
///This part initialize those info based on rooms selected.
///
///The result is stored in the above two list.
#region Code block of step-2
///1-Ask the user for structural levels.
///
///This infomation is not able to acquire directly from
///the Room type.
///The program assume all room share same structural
///floor and ceiling level.
///
double structCeilingH = 0;
double structFloorH = 0;
///Using a form to display all the reference levels
///for user to choose from.
using (CmdAutoRouteEform input = new CmdAutoRouteEform())
{
///Filter out all the levels.
FilteredElementCollector levels =
new FilteredElementCollector(doc)
.WhereElementIsNotElementType()
.OfCategory(BuiltInCategory.OST_Levels);
///Acquire level names and height.
string[] levelNames =
levels.Select(l => l.Name).ToArray();
double[] levelH =
levels.Select(l => l as Level)
.Select(l => l.ProjectElevation)
.ToArray();
///Display the levels on the form.
input.InputLevels(levelNames);
DialogResult dr = input.ShowDialog();
///Result OK-Log the height choosen.
///Result Cancel or other-Cancel the command.
if (dr == DialogResult.OK)
{
structCeilingH = levelH
[input.listCeilingLevel.SelectedIndex];
structFloorH = levelH
[input.listFloorLevel.SelectedIndex];
}
else
{
return(Result.Cancelled);
}
}
///2-Create roomInfo object for each room selected.
foreach (Room r in roomSelected)
{///The constructor of RoomInfoElec will do the job automaticly.
roomInfoList.Add(new RoomInfoElec
(r, structCeilingH, structFloorH));
}
///3-Create systemInfo object for eacy electrical circuit.
/// Add the fixtures info to roomInfo and systemInfo object.
try
{
///Filter out all the electrical circuits.
FilteredElementCollector col =
new FilteredElementCollector(doc)
.WhereElementIsNotElementType()
.OfCategory(BuiltInCategory.OST_ElectricalCircuit);
///Create systemInfo object for each circuit.
foreach (Element elecCir in col)
{
///Transfer the result to electricalsystem type.
ElectricalSystem elecSys
= elecCir as ElectricalSystem;
///The constructor of SystemInfoElec will do the
///basic automaticly.
SystemInfoElec systemInfo
= new SystemInfoElec(elecSys);
///Add each normal fixtures in this system.
foreach (Element f in elecSys.Elements)
{
///If the fixture don't have room which it
///belong to,abandon it.
FamilyInstance fixture = f as FamilyInstance;
if (fixture.Room == null)
{
continue;
}
///Find the roomInfo object for the room.
var roomInfoE = roomInfoList
.Where(r => r.Room.Id == fixture.Room.Id)
.First();
if (roomInfoE == null)
{
continue;
}
///Create the fixture object.
///FixtureE is a custom built type that will
///be used in the calculation later on.
FixtureE fE = new FixtureE(fixture);
///The accessnode of a fixture is where it will
///access the circuit.Refer to the object for details.
fE.SetAccessNode(roomInfoE);
///Add this fixture to both roominfo and systeminfo.
roomInfoE.AddFixture(fE, systemInfo);
systemInfo.AddFixture(fE, roomInfoE);
}
///Add electrical panel as another fixture.
Room room = systemInfo.BaseEquipment.Room;
RoomInfoElec rInfo = roomInfoList
.Where(r => r.Room.Name == room.Name)
.FirstOrDefault()
as RoomInfoElec;
systemInfo.AddFixture
(systemInfo.BaseEquipment, rInfo);
rInfo.AddFixture
(systemInfo.BaseEquipment, systemInfo);
///Finish adding fixture and enlist the object
systemInfoList.Add(systemInfo);
}
}
catch (Exception e)
{
TaskDialog.Show("Error", e.Message);
return(Result.Failed);
}
#endregion
///Step3-Calculate the place to cross the wall.
///
/// In order to avoid some unnecessary calculation,
/// this command calculate the room topology first
/// and find the place for electrical wires to cross
/// the wall.
///
/// The crossing point at eachside of a wall will be
/// added as a special fixtures to the system and room.
///
/// And they will be connected in the systemGraph.
/// While other fixtures will only be allowed to connect
/// with the fixtures in the same room in the following
/// systemGraph.
///
#region Code block of step3
///1-Initialize the vertices and the roomgraph.
List <Vertex> vRooms = new List <Vertex>();
foreach (RoomInfoElec r in roomInfoList)
{
vRooms.Add(new Vertex(r));
}
Graph roomGraph = new Graph(vRooms);
int vNum = roomGraph.VertexCount;
///2-Calculate the fixtures centroid of each room.
foreach (RoomInfoElec r in roomInfoList)
{
r.CalculateFixCentroid();
}
///Find the room where the panel are located.
///And change the centroid of this room to panel location.
Room panelRoom = systemInfoList[0].BaseEquipment.Room;
Vertex panelVertex = roomGraph.Vertices
.Where(v => v.Object.ToString() == panelRoom.Name)
.ToArray().First() as Vertex;
RoomInfoElec panelRoomInfo = panelVertex.Object
as RoomInfoElec;
panelRoomInfo.AssignFixCentroid
(systemInfoList[0].BaseEquipment.OriginNode);
///3-Initialize the edges for roomGraph.
for (int i = 0; i < vNum; i++)
{
for (int j = i + 1; j < vNum; j++)
{
///Find the vertex and object first.
Vertex v1 = roomGraph.Vertices.ElementAt(i);
Vertex v2 = roomGraph.Vertices.ElementAt(j);
RoomInfoElec r1 = v1.Object as RoomInfoElec;
RoomInfoElec r2 = v2.Object as RoomInfoElec;
///If this two room is adjacent and have a
///path to cross the wall,create the edge in
///the roomGraph.
if (r1.AdjacentPathTo
(r2, r2.StructCeilingLevel
, out PathExWall path, out double roughL))
{
Edge e = new Edge(v1, v2, path, roughL);
roomGraph.AddEdge(e);
}
}
}
///Using the DijkstraTree algorithm to calculate the
///crosswall path tree in which each room can have a
///shortest path to the panel.
Edge[] mstRoomDij = roomGraph.DijkstraTree(panelVertex);
#endregion
///Step4-Create systemGraph and add cross wall point.
///
///The systemGraph contains all the fixtures of one system
///as vertex in the graph.And the routes between fixtures
///are stored as edges in the graph.
///
///Later will use mininum span tree to decided which route
///to use and which to abandon.
List <Graph> sysGraphList = new List <Graph>();
List <PathExWall> crossWallPaths = new List <PathExWall>();
#region Code block of step4
///1-Correct all the direction of crosspoint.
///Make them start from panelroom to the other room.
foreach (Vertex v in vRooms)
{
///Skip the root room.
if (v == v.Parent)
{
continue;
}
///Find the path from this room to its parent.
Edge e = roomGraph.FindEdge(v, v.Parent);
PathExWall p = e.Object as PathExWall;
///If direction is wront,reverse it.
if (e.Begin != v.Parent)
{
e.Reverse();
p.Reverse();
}
///Acquire the path for further use.
crossWallPaths.Add(p);
}
///2-Add vertex for each system the graph.
foreach (SystemInfoElec sys in systemInfoList)
{
///sysGraph is the graph of fixtures for this system.
Graph sysGraph = new Graph();
///sysRooms contains all the rooms in which there are
///fixtures of this system.
List <RoomInfoElec> sysRooms
= sys.ElecFixturesDic.Keys.ToList();
///sysRoomsV are all the roomVertex that system
///will need to path through.
///It may not be all rooms but may also be
///more than sysRooms.(Non adjacent rooms need to
///use other room to connect)
List <Vertex> sysRoomsV = roomGraph.UpTrace
(vRooms.Where(v => sysRooms
.Contains(v.Object as RoomInfoElec)));
///First add all the normal fixture as vertex.
foreach (FixtureE f in sys.ElecFixtures)
{
sysGraph.AddVertex(new Vertex(f));
}
///Second add the crossing paths.
///(Both vertex and edge)
foreach (Vertex v in sysRoomsV)
{
///Skip the root room.
if (v.Parent == v)
{
continue;
}
///Find the rooms.
///toR is the one further to the root(panel).
RoomInfoElec toR = v.Object
as RoomInfoElec;
RoomInfoElec fromR = v.Parent.Object
as RoomInfoElec;
///Find the edge that connect two vertices.
Edge e = roomGraph.FindEdge(v, v.Parent);
PathExWall p = e.Object as PathExWall;
///Add the crossing point in eachroom
///as a fixture to roomInfo object.
fromR.AddFixture(p.CurrentBegin, sys);
toR.AddFixture(p.CurrentEnd, sys);
///Add them also to the systemInfo.
sys.AddFixture(p.CurrentBegin, fromR);
sys.AddFixture(p.CurrentEnd, toR);
///Add crossing point as vertex to systemGraph.
///And the path connect them as edge.
Vertex v1 = new Vertex(p.CurrentBegin);
Vertex v2 = new Vertex(p.CurrentEnd);
Edge enew = new Edge
(v1, v2, p.CloneCurrent(), p.Cost);
sysGraph.AddVertex(v1);
sysGraph.AddVertex(v2);
sysGraph.AddEdge(enew);
}
///Generate next crossing path for next system.
///Including the paths which this system didnt use.
foreach (PathExWall p in crossWallPaths)
{
p.MoveNext();
}
///Add sysGraph to list.
sysGraphList.Add(sysGraph);
}
#endregion
///Step5-Calculate the final route.
///
///Use the mininum span tree to calculate the
///final route combination.
#region Code block of step5.
///1-Add all the route inside rooms to the graph.
int sysIndex = 0;
foreach (Graph sysGraph in sysGraphList)
{
foreach (RoomInfoElec r in roomInfoList)
{
///Get all the fixtures inside this room.
List <Vertex> fixs = sysGraph.Vertices
.Where(v => (v.Object as FixtureE)
.Room.Name == r.Room.Name)
.ToList();
int fixsNum = fixs.Count();
///Calculate path for each fixture pair.
///And add it to the graph
for (int i = 0; i < fixsNum; i++)
{
for (int j = i + 1; j < fixsNum; j++)
{
PathE p = r.FindPath
(fixs[i].Object as FixtureE,
fixs[j].Object as FixtureE);
sysGraph.AddEdge
(new Edge(fixs[i], fixs[j],
p, p.Cost));
}
}
}
///2-Using KruskalMinTree to generate the sysPaths
Edge[] sysPaths = sysGraph.KruskalMinTree();
///3-Store the path to systemInfo.
///Find the corresponding systemInfo object.
SystemInfoElec eSys = systemInfoList[sysIndex];
///Select the lines in the paths and add them
///as wires to the systemInfo object.
eSys.AddWires(sysPaths
.Select(e => e.Object as PathE)
.Select(p => p.Lines)
.SelectMany(c => c)
.ToList());
///Increment the index
sysIndex++;
}
#endregion
///Step6-Create the line
///
///Open a transaction and create the line as modelcurve.
///Each system will have a seperate linestyle with
///different color to seperate.
///And all the modelcurves in one system will be grouped.
#region Code block of step6
using (Transaction tx = new Transaction(doc))
{
tx.Start("Create Wires");
///1-Prepare new linestyle color.
Categories cats = doc.Settings.Categories;
Category lineCat = cats
.get_Item(BuiltInCategory.OST_Lines);
List <Color> colors = new List <Color>
{
new Color(255, 0, 0),
new Color(0, 255, 0),
new Color(0, 0, 255),
new Color(150, 150, 0),
new Color(0, 150, 150),
new Color(150, 0, 150)
};
short counter = 1;
foreach (SystemInfoElec eSys in systemInfoList)
{
Category newLineStyleCat = null;
Element newLineStyle = null;
///2-Create the new linestyle for this system.
///If having naming conflict,result will be null.
///Then redo the loop.
do
{
try
{
newLineStyleCat = cats.NewSubcategory
(lineCat, "ElectricalLine-" + counter);
doc.Regenerate();
newLineStyleCat.SetLineWeight
(7, GraphicsStyleType.Projection);
newLineStyleCat.LineColor = colors[counter - 1];
newLineStyle =
doc.GetElement(newLineStyleCat.Id);
}
catch
{
counter++;
}
} while (newLineStyleCat == null);
///3-Create the model line and set linestyle.
XYZ x0 = new XYZ();
List <ElementId> modelC = new List <ElementId>();
///If no wires is generated,skip.
if (eSys.Wires.Count == 0)
{
continue;
}
foreach (Curve c in eSys.Wires)
{
XYZ x1 = c.GetEndPoint(0);
XYZ x2 = c.GetEndPoint(1);
SketchPlane sp = SketchPlane.Create
(doc, Plane.CreateByThreePoints(x1, x2, x0));
ModelCurve mc = doc.Create.NewModelCurve(c, sp);
mc.LineStyle = newLineStyle;
modelC.Add(mc.Id);
}
///4-Group all the curves.
doc.Create.NewGroup(modelC);
counter++;
}
tx.Commit();
}
#endregion
return(Result.Succeeded);
}