//パソコンによる空気調和計算法 pp.180
private static void makeRoom(double timeStep, out Zone room, out Wall exWall, out Wall inWall, out Wall ceiling, out Wall floor,
out Sun sun, out Outdoor outdoor)
{
//太陽を作成//東京
sun = new Sun(35, 139, 134);
//外界を作成
outdoor = new Outdoor();
outdoor.Sun = sun;
//室を作成
room = new Zone();
room.Volume = 353;
room.SensibleHeatCapacity = 3500 * 1000;
room.InitializeAirState(26, 0.018);
room.VentilationVolume = room.Volume * 0.2;
room.TimeStep = timeStep;
WallLayers layers;
WallLayers.Layer layer;
//外壁を作成
layers = new WallLayers();
layer = new WallLayers.Layer(new WallMaterial("アルミ化粧板", 210, 2373), 0.002);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("中空層", 1d / 0.086d, 0), 0);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("ロックウール", 0.042, 84), 0.050);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("コンクリート", 1.4, 1934), 0.150);
layers.AddLayer(layer);
exWall = new Wall(layers);
exWall.SurfaceArea = 22.4;
exWall.TimeStep = timeStep;
WallSurface ews = exWall.GetSurface(true);
ews.SolarAbsorptance = 0.7;
ews.LongWaveEmissivity = 0.9;
ews.Albedo = 0.2;
WallSurface iws = exWall.GetSurface(false);
ews.FilmCoefficient = 23;
iws.FilmCoefficient = 9.3;
exWall.SetIncline(new Incline(Incline.Orientation.SW, 0.5 * Math.PI), true);
room.AddSurface(iws); //部屋に追加
outdoor.AddWallSurface(ews); //外界に追加
room.SetShortWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
room.SetLongWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
//内壁を作成
layers = new WallLayers();
layer = new WallLayers.Layer(new WallMaterial("コンクリート", 1.4, 1934), 0.120, 2);
layers.AddLayer(layer);
inWall = new Wall(layers);
inWall.SurfaceArea = 100.8;
inWall.TimeStep = timeStep;
iws = inWall.GetSurface(true);
iws.FilmCoefficient = 9.3;
room.AddSurface(iws);
room.SetShortWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
room.SetLongWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
//床と天井を作成
layers = new WallLayers();
layer = new WallLayers.Layer(new WallMaterial("カーペット", 0.08, 318), 0.015);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("コンクリート", 1.4, 1934), 0.150);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("中空層", 1d / 0.086d, 0), 0);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("石膏ボード", 0.17, 1030), 0.012);
layers.AddLayer(layer);
//床
floor = new Wall(layers);
floor.SurfaceArea = 98;
floor.TimeStep = timeStep;
iws = floor.GetSurface(true);
iws.FilmCoefficient = 9.3;
room.AddSurface(iws);
room.SetShortWaveRadiationRate(iws, iws.Area * 2.0); //放射成分吸収比率を設定**多め
room.SetLongWaveRadiationRate(iws, iws.Area * 2.0); //放射成分吸収比率を設定**多め
//天井
ceiling = new Wall(layers);
ceiling.SurfaceArea = 98;
ceiling.TimeStep = timeStep;
iws = ceiling.GetSurface(false);
iws.FilmCoefficient = 9.3;
room.AddSurface(iws);
room.SetShortWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
room.SetLongWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
//室温・隣室温度を設定
inWall.AirTemperature2 = ceiling.AirTemperature1 = floor.AirTemperature2 = 25;
//窓を作成
GlassPanes glassPanes = new GlassPanes(0.79, 0.04, 190);
Window window = new Window(glassPanes);
WindowSurface ws = window.GetSurface(true);
ws.FilmCoefficient = 23;
ws.Albedo = 0.2;
window.SurfaceArea = 28;
window.OutSideIncline = new Incline(Incline.Orientation.SW, 0.5 * Math.PI);
ws = window.GetSurface(false);
ws.FilmCoefficient = 9.3;
room.AddWindow(window);
outdoor.AddWindow(window);
window.ShadowRate = 0;
room.SetShortWaveRadiationRate(window, window.SurfaceArea); //放射成分吸収比率を設定
room.SetLongWaveRadiationRate(window, window.SurfaceArea); //放射成分吸収比率を設定
//壁体初期化
inWall.InitializeTemperature(22);
exWall.InitializeTemperature(22);
floor.InitializeTemperature(22);
ceiling.InitializeTemperature(22);
}
/// <summary>多数室テスト</summary>
/// <remarks>
/// 東西2室で壁・窓表面の相互放射を考慮した計算を行う。
/// 東側は南北で2ゾーンに分割する。
/// 壁体は全て200mmのコンクリートとする。
/// 幅×奥行き×高さ = 8m×7m×3mとする。
/// 地面（床）は考慮しない。
///
/// N1 N2
/// -------------------------
/// | | |
/// | | znE1 | E1
/// | | |
/// W | znW |- - - - - -|
/// | | |
/// | | znE2 | E2
/// | | |
/// ----+++++----------------
/// S1 S2
///
/// </remarks>
private static void multiRoomTest()
{
const double TIME_STEP = 3600;
const double INIT_TEMP = 15;
const double H_GAIN = 0;
const int ITER_NUM = 100;
const double W_AI = 8;
const double E_AI = 9.3;
const double W_AO = 20;
const double E_AO = 23;
bool USE_TUBE = false;
//モデル作成処理*********************************************************
//屋外
Outdoor outDoor = new Outdoor();
Sun sun = new Sun(Sun.City.Tokyo);
sun.Update(new DateTime(2001, 1, 1, 0, 0, 0));
outDoor.Sun = sun;
//壁リスト
Wall[] walls = new Wall[12];
//ゾーンを作成
Zone znW = new Zone();
znW.Volume = 7 * 4 * 3;
znW.SensibleHeatCapacity = znW.Volume * 12000;//単位容積あたり12kJ
Zone znE1 = new Zone();
znE1.Volume = 3.5 * 4 * 3;
znE1.SensibleHeatCapacity = znE1.Volume * 12000;//単位容積あたり12kJ
Zone znE2 = new Zone();
znE2.Volume = 3.5 * 4 * 3;
znE2.SensibleHeatCapacity = znE2.Volume * 12000;//単位容積あたり12kJ
znW.TimeStep = znE1.TimeStep = znE2.TimeStep = TIME_STEP;
//壁構成を作成（コンクリート）
WallLayers layers;
WallLayers.Layer layer;
layers = new WallLayers();
layer = new WallLayers.Layer(new WallMaterial("コンクリート", 1.4, 1934), 0.150, 2);
layers.AddLayer(layer);
//西外壁
walls[0] = new Wall(layers);
walls[0].SurfaceArea = 7 * 3;
WallSurface ews = walls[0].GetSurface(true);
WallSurface iws = walls[0].GetSurface(false);
ews.FilmCoefficient = W_AO;
iws.FilmCoefficient = W_AI;
walls[0].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), true);
znW.AddSurface(iws);
outDoor.AddWallSurface(ews);
//東外壁1
walls[1] = new Wall(layers);
walls[1].SurfaceArea = 3.5 * 3;
ews = walls[1].GetSurface(true);
iws = walls[1].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[1].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), true);
znE1.AddSurface(iws);
outDoor.AddWallSurface(ews);
//東外壁2
walls[2] = new Wall(layers);
walls[2].SurfaceArea = 3.5 * 3;
ews = walls[2].GetSurface(true);
iws = walls[2].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[2].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), true);
znE2.AddSurface(iws);
outDoor.AddWallSurface(ews);
//北外壁1
walls[3] = new Wall(layers);
walls[3].SurfaceArea = 4 * 3;
ews = walls[3].GetSurface(true);
iws = walls[3].GetSurface(false);
ews.FilmCoefficient = W_AO;
iws.FilmCoefficient = W_AI;
walls[3].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), true);
znW.AddSurface(iws);
outDoor.AddWallSurface(ews);
//北外壁2
walls[4] = new Wall(layers);
walls[4].SurfaceArea = 4 * 3;
ews = walls[4].GetSurface(true);
iws = walls[4].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[4].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), true);
znE1.AddSurface(iws);
outDoor.AddWallSurface(ews);
//南外壁1
walls[5] = new Wall(layers);
walls[5].SurfaceArea = 4 * 3;
ews = walls[5].GetSurface(true);
iws = walls[5].GetSurface(false);
ews.FilmCoefficient = W_AO;
iws.FilmCoefficient = W_AI;
walls[5].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), true);
znW.AddSurface(iws);
outDoor.AddWallSurface(ews);
//南外壁2
walls[6] = new Wall(layers);
walls[6].SurfaceArea = 4 * 3;
ews = walls[6].GetSurface(true);
iws = walls[6].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[6].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), true);
znE2.AddSurface(iws);
outDoor.AddWallSurface(ews);
//屋根1
walls[7] = new Wall(layers);
walls[7].SurfaceArea = 4 * 7;
ews = walls[7].GetSurface(true);
iws = walls[7].GetSurface(false);
ews.FilmCoefficient = W_AO;
iws.FilmCoefficient = W_AI;
walls[7].SetIncline(new Incline(Incline.Orientation.N, 0), true);
znW.AddSurface(iws);
outDoor.AddWallSurface(ews);
//屋根2
walls[8] = new Wall(layers);
walls[8].SurfaceArea = 4 * 3.5;
ews = walls[8].GetSurface(true);
iws = walls[8].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[8].SetIncline(new Incline(Incline.Orientation.N, 0), true);
znE1.AddSurface(iws);
outDoor.AddWallSurface(ews);
//屋根3
walls[9] = new Wall(layers);
walls[9].SurfaceArea = 4 * 3.5;
ews = walls[9].GetSurface(true);
iws = walls[9].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[9].SetIncline(new Incline(Incline.Orientation.N, 0), true);
znE2.AddSurface(iws);
outDoor.AddWallSurface(ews);
//内壁1
walls[10] = new Wall(layers);
walls[10].SurfaceArea = 7 * 3.5;
ews = walls[10].GetSurface(true);
iws = walls[10].GetSurface(false);
ews.FilmCoefficient = E_AI;
iws.FilmCoefficient = W_AI;
znW.AddSurface(iws);
znE1.AddSurface(ews);
//内壁2
walls[11] = new Wall(layers);
walls[11].SurfaceArea = 7 * 3.5;
ews = walls[11].GetSurface(true);
iws = walls[11].GetSurface(false);
ews.FilmCoefficient = E_AI;
iws.FilmCoefficient = W_AI;
znW.AddSurface(iws);
znE2.AddSurface(ews);
//南窓
GlassPanes gPanes = new GlassPanes(new GlassPanes.Pane[] {
new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.TransparentGlass03mm),
new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.HeatAbsorbingGlass03mm)
});
//外側ブラインド
GlassPanes gPanesWithBlind = new GlassPanes(new GlassPanes.Pane[] {
new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.TransparentGlass03mm),
new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.HeatAbsorbingGlass03mm),
new GlassPanes.Pane(0.05, 0.35, 9999)
});
Window window = new Window(gPanes, new Incline(Incline.Orientation.S, 0.5 * Math.PI));
window.SurfaceArea = 1 * 3;
WindowSurface ws1 = window.GetSurface(true);
WindowSurface ws2 = window.GetSurface(false);
ws1.LongWaveEmissivity = 0.7;
ws1.FilmCoefficient = W_AO;
ws2.FilmCoefficient = W_AI;
znW.AddWindow(window);
outDoor.AddWindow(window);
/*//debug
for (int i = 0; i < walls.Length; i++)
{
walls[i].GetSurface(true).ConvectiveRate = 0;
walls[i].GetSurface(false).ConvectiveRate = 0;
}
//window.GetSurface(false).ConvectiveRate = 0;
//debug*/
//発熱体*****************************************************************
znW.AddHeatGain(new ConstantHeatGain(0, H_GAIN, 0));
//制御*******************************************************************
znE1.ControlDrybulbTemperature = false;
znE1.DrybulbTemperatureSetPoint = 20;
znE2.ControlDrybulbTemperature = false;
znE2.DrybulbTemperatureSetPoint = 20;
znW.ControlDrybulbTemperature = false;
znW.DrybulbTemperatureSetPoint = 20;
//外界条件設定***********************************************************
outDoor.AirState = new MoistAir(30, 0.020);
outDoor.SetWallSurfaceBoundaryState();
//天井に冷水配管を設置
if (USE_TUBE)
{
Tube tube = new Tube(0.999, 0.275, 4186);
tube.SetFlowRate(0.222);
tube.FluidTemperature = 10;
walls[7].AddTube(tube, 0);
walls[8].AddTube(tube, 0);
walls[9].AddTube(tube, 0);
}
//室温・壁温初期化*******************************************************
for (int i = 0; i < walls.Length; i++) walls[i].InitializeTemperature(INIT_TEMP);
znE1.InitializeAirState(INIT_TEMP, 0.015);
znE2.InitializeAirState(INIT_TEMP, 0.015);
znW.InitializeAirState(INIT_TEMP, 0.015);
//多数室オブジェクトを作成・初期化
Room[] rooms = new Room[2];
rooms[0] = new Room(new Zone[] { znW });
rooms[1] = new Room(new Zone[] { znE1, znE2 });
MultiRoom mRoom = new MultiRoom(rooms);
mRoom.SetTimeStep(TIME_STEP);
//初期化
mRoom.Initialize();
//室間換気設定***********************************************************
znW.VentilationVolume = znW.Volume * 0;
znE1.VentilationVolume = znE1.Volume * 0;
znE2.VentilationVolume = znE2.Volume * 0;
znW.VentilationAirState = outDoor.AirState;
znE1.VentilationAirState = outDoor.AirState;
znE2.VentilationAirState = outDoor.AirState;
//mRoom.SetAirFlow(znE1, znE2, 10);
//mRoom.SetAirFlow(znE2, znW, 10);
//mRoom.SetAirFlow(znW, znE1, 10);
//熱収支確認用変数*******************************************************
double heatTransferToExWall = 0;
double heatTransferToTube = 0;
double heatTransferToWindow = 0;
double oaLoad = 0;
//外気データ読み込み*****************************************************
StreamReader sReader = new StreamReader("BESTestWeather.csv");
sReader.ReadLine();
//室温更新テスト*********************************************************
for (int i = 0; i < ITER_NUM; i++)
{
//外気条件設定
string[] wData = sReader.ReadLine().Split(',');
outDoor.AirState = new MoistAir(double.Parse(wData[2]), double.Parse(wData[3]));
sun.DirectNormalRadiation = double.Parse(wData[4]);
sun.GlobalHorizontalRadiation = double.Parse(wData[5]);
sun.DiffuseHorizontalRadiation = double.Parse(wData[6]);
outDoor.NocturnalRadiation = double.Parse(wData[8]);
//12~13時は外側ブラインドを利用
if (sun.CurrentDateTime.Hour == 12 && sun.CurrentDateTime.Minute == 0) window.Initialize(gPanesWithBlind);
if (sun.CurrentDateTime.Hour == 13 && sun.CurrentDateTime.Minute == 0) window.Initialize(gPanes);
Console.WriteLine(
znW.CurrentDrybulbTemperature.ToString("F3").PadLeft(5) + " | "
+ znE1.CurrentDrybulbTemperature.ToString("F3").PadLeft(5) + " | "
+ znE2.CurrentDrybulbTemperature.ToString("F3").PadLeft(5) + " | "
+ znW.CurrentSensibleHeatLoad.ToString("F2").PadLeft(5) + " | "
+ znE1.CurrentSensibleHeatLoad.ToString("F2").PadLeft(5) + " | "
+ znE2.CurrentSensibleHeatLoad.ToString("F2").PadLeft(5) + " | "
+ walls[0].GetWallTemprature(true).ToString("F2").PadLeft(5) + " | "
+ walls[0].GetWallTemprature(false).ToString("F2").PadLeft(5) + " | "
);
//壁体状態更新
for (int j = 0; j < walls.Length; j++) walls[j].Update();
//外気条件を壁に設定
outDoor.SetWallSurfaceBoundaryState();
//室状態更新
mRoom.UpdateRoomTemperatures();
mRoom.UpdateRoomHumidities();
//壁体への熱移動量を積算
for (int j = 0; j < 10; j++) heatTransferToExWall += walls[j].GetHeatTransfer(true);
//窓面への熱移動量を積算
heatTransferToWindow += window.AbsorbedHeatGain + window.TransferHeatGain + window.TransmissionHeatGain;
heatTransferToWindow -= rooms[0].TransmissionHeatLossFromWindow + rooms[1].TransmissionHeatLossFromWindow;
//チューブへの熱移動量を積算
heatTransferToTube += walls[7].GetHeatTransferToTube(0) + walls[8].GetHeatTransferToTube(0) + walls[9].GetHeatTransferToTube(0);
//外気負荷を計算
Zone[] zns = new Zone[] { znE1, znE2, znW };
for (int j = 0; j < zns.Length; j++)
{
if (zns[j].VentilationVolume != 0)
{
double airDS = 1d / (MoistAir.GetAirStateFromDBHR(zns[j].CurrentDrybulbTemperature, zns[j].CurrentHumidityRatio, MoistAir.Property.SpecificVolume));
double cpAir = MoistAir.GetSpecificHeat(zns[j].CurrentHumidityRatio);
oaLoad += zns[j].VentilationVolume * airDS * cpAir * (zns[j].VentilationAirState.DryBulbTemperature - zns[j].CurrentDrybulbTemperature);
}
}
//日時更新
sun.Update(sun.CurrentDateTime.AddSeconds(TIME_STEP));
}
sReader.Close();
//熱収支を書き出し
//屋外から壁体への熱移動量[MJ]
heatTransferToExWall *= TIME_STEP / 1000000d;
//窓面への熱移動量[MJ]
heatTransferToWindow *= TIME_STEP / 1000000d;
//壁体からチューブへの熱移動量[MJ]
heatTransferToTube *= TIME_STEP / 1000000d;
//外気負荷[MJ]
oaLoad *= TIME_STEP / 1000000d / 3.6;
//壁体蓄熱量[MJ]
double wallHeatStorage = 0;
for (int i = 0; i < walls.Length; i++) wallHeatStorage += walls[i].GetHeatStorage(INIT_TEMP);
wallHeatStorage /= 1000d;
//室蓄熱量[MJ]
double zoneHeatStorage = (znE1.GetHeatStorage(INIT_TEMP) + znE2.GetHeatStorage(INIT_TEMP) + znW.GetHeatStorage(INIT_TEMP)) / 1000d;
//発熱量
double heatGain = (H_GAIN * TIME_STEP * ITER_NUM) / 1000000;
//書き出し
Console.WriteLine("壁体への熱移動[MJ] | 窓面への熱移動[MJ] | 壁体の蓄熱量[MJ] | 室の蓄熱量[MJ] | 発熱量[MJ] | チューブへの熱移動[MJ] | 外気負荷[MJ]");
Console.WriteLine(heatTransferToExWall.ToString("F2") + " | " + heatTransferToWindow.ToString("F2") + " | " +
wallHeatStorage.ToString("F2") + " | " + zoneHeatStorage.ToString("F2") + " | " + heatGain + " | " + heatTransferToTube.ToString("F2") + " | " + oaLoad.ToString("F2"));
Console.WriteLine("熱収支[MJ] = " + (heatTransferToExWall + heatTransferToWindow - heatTransferToTube - wallHeatStorage - zoneHeatStorage + heatGain + oaLoad));
Console.Read();
}
private static void windowTest()
{
//パソコンによる空気調和計算法。pp.117
//設計用気象データ
double[] wdIdn = new double[] { 0, 0, 0, 0, 0, 244, 517, 679, 774, 829, 856, 862, 847, 809, 739, 619, 415, 97, 0, 0, 0, 0, 0, 0 };
double[] wdIsky = new double[] { 0, 0, 0, 0, 21, 85, 109, 116, 116, 113, 110, 109, 111, 114, 116, 114, 102, 63, 0, 0, 0, 0, 0, 0 };
double[] wdDbt = new double[] { 27.4, 27.1, 26.8, 26.5, 26.9, 27.7, 28.8, 29.8, 30.8, 31.5, 32.1, 32.6, 32.9, 33.2, 33.5, 33.1, 32.4, 31.5, 30.6, 29.8, 29.1, 28.5, 28.1, 27.7 };
double[] wdAhd = new double[] { 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018 };
double[] wdRN = new double[] { 24, 24, 24, 24, 24, 24, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 25, 25, 25, 25, 24, 24, 24 };
GlassPanes wPropS = new GlassPanes(0.85, 0.02, 6.4);
GlassPanes wPropE = new GlassPanes(0.85, 0.02, 6.4);
Window winS = new Window(wPropS);
WindowSurface ws = winS.GetSurface(true);
winS.SurfaceArea = 1;
ws.Albedo = 0.2;
winS.OutSideIncline = new Incline(Incline.Orientation.S, Math.PI * 0.5);
Window winE = new Window(wPropE);
ws = winE.GetSurface(true);
winE.SurfaceArea = 1;
winE.OutSideIncline = new Incline(Incline.Orientation.E, Math.PI * 0.5);
ws.Albedo = 0.2;
SunShade ss1 = SunShade.MakeHorizontalSunShade(2, 1.8, 0.6, 0.25, 0.25, 0, winS.OutSideIncline);
SunShade ss2 = SunShade.MakeVerticalSunShade(2, 1.8, 0.6, 0.5, winS.OutSideIncline);
SunShade ss3 = SunShade.MakeGridSunShade(3, 2, 1.3, 0.6, 0.6, 0.3, -0.9, winE.OutSideIncline);
Sun sun = new Sun(Sun.City.Tokyo);
DateTime dTime = new DateTime(2001, 7, 21, 5, 0, 0);
sun.Update(dTime);
winS.Sun = sun;
winE.Sun = sun;
for (int i = 4; i < 18; i++)
{
sun.SetGlobalHorizontalRadiation(wdIsky[i], wdIdn[i]);
winS.NocturnalRadiation = wdRN[i];
winE.NocturnalRadiation = wdRN[i];
ws = winS.GetSurface(true);
ws.AirTemperature = wdDbt[i];
ws = winE.GetSurface(true);
ws.AirTemperature = wdDbt[i];
Console.Write((i + 1).ToString() + "h: " + winS.TransmissionHeatGain.ToString("F0") + ", " + winS.AbsorbedHeatGain.ToString("F0") + ", ");
winS.ShadowRate = ss1.GetShadowRate(sun);
Console.Write(winS.ShadowRate.ToString("F3") + ", " + winS.TransmissionHeatGain.ToString("F0") + ", " + winS.AbsorbedHeatGain.ToString("F0") + ", ");
winS.ShadowRate = ss2.GetShadowRate(sun);
Console.Write(winS.ShadowRate.ToString("F3") + ", " + winS.TransmissionHeatGain.ToString("F0") + ", " + winS.AbsorbedHeatGain.ToString("F0") + ", ");
winE.ShadowRate = ss3.GetShadowRate(sun);
Console.WriteLine(winE.ShadowRate.ToString("F3") + ", " + winE.TransmissionHeatGain.ToString("F0") + ", " + winE.AbsorbedHeatGain.ToString("F0"));
dTime = dTime.AddHours(1);
sun.Update(dTime);
}
}
private static void windowTest1()
{
//気象データ//直達日射,天空放射,乾球温度,夜間放射
double[] wdIdn = new double[] { 0, 0, 0, 0, 0, 244, 517, 679, 774, 829, 856, 862, 847, 809, 739, 619, 415, 97, 0, 0, 0, 0, 0, 0 };
double[] wdIsky = new double[] { 0, 0, 0, 0, 21, 85, 109, 116, 116, 113, 110, 109, 111, 114, 116, 114, 102, 63, 0, 0, 0, 0, 0, 0 };
double[] wdDbt = new double[] { 27, 27, 27, 27, 27, 28, 29, 30, 31, 32, 32, 33, 33, 33, 34, 33, 32, 32, 31, 30, 29, 29, 28, 28 };
double[] wdRN = new double[] { 24, 24, 24, 24, 24, 24, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 25, 25, 25, 25, 24, 24, 24 };
//3mm透明ガラスの窓を作成
GlassPanes.Pane pane = new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.TransparentGlass03mm);
GlassPanes glassPane = new GlassPanes(pane);
Window window = new Window(glassPane);
//表面総合熱伝達率を設定
WindowSurface ws = window.GetSurface(true);
ws.FilmCoefficient = 23d;
ws = window.GetSurface(false);
ws.FilmCoefficient = 9.3;
//屋外面の傾斜を設定//南向き垂直壁
Incline incline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
window.OutSideIncline = incline;
//地表面反射率：アルベドを設定
ws.Albedo = 0.2;
//日除けは無し
window.Shade = SunShade.EmptySunShade;
//7月21日0:00の東京の太陽を作成
Sun sun = new Sun(Sun.City.Tokyo);
DateTime dTime = new DateTime(2001, 7, 21, 0, 0, 0);
sun.Update(dTime);
window.Sun = sun;
//室内側乾球温度は25度で一定とする
ws = window.GetSurface(false);
ws.AirTemperature = 25;
//計算結果タイトル行
Console.WriteLine(" 時刻 | 透過日射[W] | 吸収日射[W] | 貫流熱[W] | 対流熱取得[W] | 放射熱取得[W]");
//終日の計算実行
for (int i = 0; i < 24; i++)
{
//日射量設定
sun.SetGlobalHorizontalRadiation(wdIsky[i], wdIdn[i]);
//夜間放射設定
window.NocturnalRadiation = wdRN[i];
//外気乾球温度を設定
ws = window.GetSurface(true);
ws.AirTemperature = wdDbt[i];
//計算結果書き出し
Console.WriteLine(dTime.ToShortTimeString().PadLeft(5) + " | " +
window.TransmissionHeatGain.ToString("F1").PadLeft(11) + " | " +
window.AbsorbedHeatGain.ToString("F1").PadLeft(11) + " | " +
window.TransferHeatGain.ToString("F1").PadLeft(9) + " | " +
window.ConvectiveHeatGain.ToString("F1").PadLeft(13) + " | " +
window.RadiativeHeatGain.ToString("F1").PadLeft(13));
//時刻更新
dTime = dTime.AddHours(1);
sun.Update(dTime);
}
Console.Read();
}
/// <summary>室の温湿度変動テスト(MultiRoomクラス)</summary>
private static void RoomModelTest2()
{
//気象データ:乾球温度,絶対湿度,夜間放射,直達日射,天空日射
double[] dbt = new double[] { 24.2, 24.1, 24.1, 24.2, 24.3, 24.2, 24.4, 25.1, 26.1, 27.1, 28.8, 29.9,
30.7, 31.2, 31.6, 31.4, 31.3, 30.8, 29.4, 28.1, 27.5, 27.1, 26.6, 26.3 };
double[] ahd = new double[] { 0.0134, 0.0136, 0.0134, 0.0133, 0.0131, 0.0134, 0.0138, 0.0142, 0.0142, 0.0140, 0.0147, 0.0149,
0.0142, 0.0146, 0.0140, 0.0145, 0.0144, 0.0146, 0.0142, 0.0136, 0.0136, 0.0135, 0.0136, 0.0140 };
double[] nrd = new double[] { 32, 30, 30, 29, 26, 24, 24, 25, 25, 25, 24, 24, 24, 23, 24, 24, 24, 24, 23, 23, 24, 26, 25, 23 };
double[] dnr = new double[] { 0, 0, 0, 0, 0, 0, 106, 185, 202, 369, 427, 499, 557, 522, 517, 480, 398, 255, 142, 2, 0, 0, 0, 0 };
double[] drd = new double[] { 0, 0, 0, 0, 0, 0, 36, 115, 198, 259, 314, 340, 340, 349, 319, 277, 228, 167, 87, 16, 0, 0, 0, 0 };
//屋外を作成
Outdoor outdoor = new Outdoor();
Sun sun = new Sun(Sun.City.Tokyo);
outdoor.Sun = sun;
outdoor.GroundTemperature = 25;
//傾斜を作成
Incline nIn = new Incline(Incline.Orientation.N, 0.5 * Math.PI); //北
Incline eIn = new Incline(Incline.Orientation.E, 0.5 * Math.PI); //東
Incline wIn = new Incline(Incline.Orientation.W, 0.5 * Math.PI); //西
Incline sIn = new Incline(Incline.Orientation.S, 0.5 * Math.PI); //南
Incline hIn = new Incline(Incline.Orientation.S, 0); //水平
//ゾーンを作成
Zone[] zones = new Zone[4];
Zone wpZone = zones[0] = new Zone("西室ペリメータ");
wpZone.Volume = 3 * 5 * 3;
Zone wiZone = zones[1] = new Zone("西室インテリア");
wiZone.Volume = 4 * 5 * 3;
Zone epZone = zones[2] = new Zone("東室ペリメータ");
epZone.Volume = 3 * 5 * 3;
Zone eiZone = zones[3] = new Zone("東室インテリア");
eiZone.Volume = 4 * 5 * 3;
foreach (Zone zn in zones)
{
zn.TimeStep = 3600;
zn.DrybulbTemperatureSetPoint = 26;
zn.HumidityRatioSetPoint = 0.01;
}
//東側インテリアに発熱体を設定
eiZone.AddHeatGain(new ConstantHeatGain(100, 100, 20));
//壁構成を作成:400mmコンクリート
WallLayers wl = new WallLayers();
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.ReinforcedConcrete), 0.4));
//窓構成を作成
GlassPanes gPanes = new GlassPanes(new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.HeatReflectingGlass06mm));
//壁体をゾーンに追加
Wall[] walls = new Wall[18];
List<WallSurface> outdoorSurfaces = new List<WallSurface>();
Wall wpwWall = walls[0] = new Wall(wl, "西室ペリメータ西壁");
wpwWall.SurfaceArea = 3 * 3;
outdoorSurfaces.Add(wpwWall.GetSurface(true));
wpZone.AddSurface(wpwWall.GetSurface(false));
wpwWall.SetIncline(wIn, true);
Wall wpcWall = walls[1] = new Wall(wl, "西室ペリメータ天井");
wpcWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(wpcWall.GetSurface(true));
wpZone.AddSurface(wpcWall.GetSurface(false));
wpcWall.SetIncline(hIn, true);
Wall wpfWall = walls[2] = new Wall(wl, "西室ペリメータ床");
wpfWall.SurfaceArea = 3 * 5;
outdoor.AddGroundWallSurface(wpfWall.GetSurface(true));
wpZone.AddSurface(wpfWall.GetSurface(false));
Wall winWall = walls[3] = new Wall(wl, "西室インテリア北壁");
winWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(winWall.GetSurface(true));
wiZone.AddSurface(winWall.GetSurface(false));
winWall.SetIncline(nIn, true);
Wall wiwWall = walls[4] = new Wall(wl, "西室インテリア西壁");
wiwWall.SurfaceArea = 3 * 4;
outdoorSurfaces.Add(wiwWall.GetSurface(true));
wiZone.AddSurface(wiwWall.GetSurface(false));
wiwWall.SetIncline(wIn, true);
Wall wicWall = walls[5] = new Wall(wl, "西室インテリア天井");
wicWall.SurfaceArea = 4 * 5;
outdoorSurfaces.Add(wicWall.GetSurface(true));
wiZone.AddSurface(wicWall.GetSurface(false));
wicWall.SetIncline(hIn, true);
Wall wifWall = walls[6] = new Wall(wl, "西室インテリア床");
wifWall.SurfaceArea = 4 * 5;
outdoor.AddGroundWallSurface(wifWall.GetSurface(true));
wiZone.AddSurface(wifWall.GetSurface(false));
Wall epwWall = walls[7] = new Wall(wl, "東室ペリメータ東壁");
epwWall.SurfaceArea = 3 * 3;
outdoorSurfaces.Add(epwWall.GetSurface(true));
epZone.AddSurface(epwWall.GetSurface(false));
epwWall.SetIncline(eIn, true);
Wall epcWall = walls[8] = new Wall(wl, "東室ペリメータ天井");
epcWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(epcWall.GetSurface(true));
epZone.AddSurface(epcWall.GetSurface(false));
epcWall.SetIncline(hIn, true);
Wall epfWall = walls[9] = new Wall(wl, "東室ペリメータ床");
epfWall.SurfaceArea = 3 * 5;
outdoor.AddGroundWallSurface(epfWall.GetSurface(true));
epZone.AddSurface(epfWall.GetSurface(false));
Wall einWall = walls[10] = new Wall(wl, "東室インテリア北壁");
einWall.SurfaceArea = 5 * 3;
outdoorSurfaces.Add(einWall.GetSurface(true));
eiZone.AddSurface(einWall.GetSurface(false));
einWall.SetIncline(nIn, true);
Wall eiwWall = walls[11] = new Wall(wl, "東室インテリア東壁");
eiwWall.SurfaceArea = 4 * 3;
outdoorSurfaces.Add(eiwWall.GetSurface(true));
eiZone.AddSurface(eiwWall.GetSurface(false));
eiwWall.SetIncline(eIn, true);
Wall eicWall = walls[12] = new Wall(wl, "東室インテリア天井");
eicWall.SurfaceArea = 4 * 5;
outdoorSurfaces.Add(eicWall.GetSurface(true));
eiZone.AddSurface(eicWall.GetSurface(false));
eicWall.SetIncline(hIn, true);
Wall eifWall = walls[13] = new Wall(wl, "東室インテリア床");
eifWall.SurfaceArea = 4 * 5;
outdoor.AddGroundWallSurface(eifWall.GetSurface(true));
eiZone.AddSurface(eifWall.GetSurface(false));
Wall cpWall = walls[14] = new Wall(wl, "ペリメータ部の内壁");
cpWall.SurfaceArea = 3 * 3;
wpZone.AddSurface(cpWall.GetSurface(true));
epZone.AddSurface(cpWall.GetSurface(false));
Wall ciWall = walls[15] = new Wall(wl, "インテリア部の内壁");
ciWall.SurfaceArea = 4 * 3;
wiZone.AddSurface(ciWall.GetSurface(true));
eiZone.AddSurface(ciWall.GetSurface(false));
Wall wpsWall = walls[16] = new Wall(wl, "西側ペリメータ南壁");
wpsWall.SurfaceArea = 5 * 3 - 3 * 2;
outdoorSurfaces.Add(wpsWall.GetSurface(true));
wpZone.AddSurface(wpsWall.GetSurface(false));
wpsWall.SetIncline(sIn, true);
Wall epsWall = walls[17] = new Wall(wl, "東側ペリメータ南壁");
epsWall.SurfaceArea = 5 * 3 - 3 * 2;
outdoorSurfaces.Add(epsWall.GetSurface(true));
epZone.AddSurface(epsWall.GetSurface(false));
epsWall.SetIncline(sIn, true);
//外表面を初期化
foreach (WallSurface ws in outdoorSurfaces)
{
//屋外に追加
outdoor.AddWallSurface(ws);
//放射率を初期化
ws.InitializeEmissivity(WallSurface.SurfaceMaterial.Concrete);
}
//窓をゾーンに追加
Window wWind = new Window(gPanes, "西室ペリメータ南窓");
wWind.SurfaceArea = 3 * 2;
wpZone.AddWindow(wWind);
outdoor.AddWindow(wWind);
Window eWind = new Window(gPanes, "東室ペリメータ南窓");
eWind.SurfaceArea = 3 * 2;
eWind.Shade = SunShade.MakeHorizontalSunShade(3, 2, 1, 1, 1, 0.5, sIn);
wpZone.AddWindow(eWind);
outdoor.AddWindow(eWind);
//多数室オブジェクトを作成
Room eRm = new Room(new Zone[] { epZone, eiZone }); //東側の室
Room wRm = new Room(new Zone[] { wpZone, wiZone }); //西側の室
MultiRoom mRoom = new MultiRoom(new Room[] { eRm, wRm }); //多数室
mRoom.SetTimeStep(3600);
//換気の設定
wpZone.VentilationVolume = 10; //西室ペリメータのみ外気導入
mRoom.SetAirFlow(wpZone, wiZone, 10);
mRoom.SetAirFlow(epZone, eiZone, 10);
mRoom.SetAirFlow(eiZone, epZone, 10);
//短波長放射の入射比率を調整:ペリメータ床面6割、その他は面積比率
double sfSum = 0;
foreach (ISurface isf in eRm.GetSurface()) sfSum += isf.Area;
sfSum -= epfWall.SurfaceArea;
foreach (ISurface isf in eRm.GetSurface()) eRm.SetShortWaveRadiationRate(isf, isf.Area / sfSum * 0.4);
eRm.SetShortWaveRadiationRate(epfWall.GetSurface(false), 0.6);
sfSum = 0;
foreach (ISurface isf in wRm.GetSurface()) sfSum += isf.Area;
sfSum -= wpfWall.SurfaceArea;
foreach (ISurface isf in wRm.GetSurface()) wRm.SetShortWaveRadiationRate(isf, isf.Area / sfSum * 0.4);
wRm.SetShortWaveRadiationRate(wpfWall.GetSurface(false), 0.6);
//タイトル行書き出し
StreamWriter sWriter = new StreamWriter("室の温湿度変動テスト2.csv", false, Encoding.GetEncoding("Shift_JIS"));
foreach (Zone zn in zones) sWriter.Write(zn.Name + "乾球温度[C], " + zn.Name + "絶対湿度[kg/kgDA], " + zn.Name + "顕熱負荷[W], " + zn.Name + "潜熱負荷[W], ");
sWriter.WriteLine();
//計算実行
for (int i = 0; i < 100; i++)
{
DateTime dTime = new DateTime(2007, 8, 3, 0, 0, 0);
for (int j = 0; j < 24; j++)
{
//時刻を設定
sun.Update(dTime);
mRoom.SetCurrentDateTime(dTime);
//空調設定
bool operating = (8 <= dTime.Hour && dTime.Hour <= 19);
foreach (Zone zn in zones)
{
zn.ControlHumidityRatio = operating;
zn.ControlDrybulbTemperature = operating;
}
//気象条件を設定
outdoor.AirState = new MoistAir(dbt[j], ahd[j]);
outdoor.NocturnalRadiation = nrd[j];
sun.SetGlobalHorizontalRadiation(drd[j], dnr[j]);
//換気の設定
wpZone.VentilationAirState = outdoor.AirState;
//外壁表面の状態を設定
outdoor.SetWallSurfaceBoundaryState();
//壁体を更新
foreach (Wall wal in walls) wal.Update();
//多数室を更新
mRoom.UpdateRoomTemperatures();
mRoom.UpdateRoomHumidities();
//時刻を更新
dTime = dTime.AddHours(1);
//書き出し設定
if (i == 99)
{
foreach (Zone zn in zones)
{
sWriter.Write(zn.CurrentDrybulbTemperature.ToString("F1") + ", " + zn.CurrentHumidityRatio.ToString("F3") + ", " +
zn.CurrentSensibleHeatLoad.ToString("F0") + ", " + zn.CurrentLatentHeatLoad.ToString("F0") + ", ");
}
sWriter.WriteLine();
}
}
}
sWriter.Close();
}
/// <summary>気象状態計算の例</summary>
private static void weatherTest()
{
//東京における太陽を作成
Sun sun = new Sun(Sun.City.Tokyo);
//太陽位置を12月21日12時に調整
DateTime dTime = new DateTime(1983, 12, 21, 12, 0, 0);
sun.Update(dTime);
sun.GlobalHorizontalRadiation = 467;
Console.WriteLine("東京の12月21日12時における");
Console.WriteLine("太陽高度=" + Sky.RadianToDegree(sun.Altitude).ToString("F1") + " 度");
Console.WriteLine("太陽方位=" + Sky.RadianToDegree(sun.Orientation).ToString("F1") + " 度");
Console.WriteLine("水平面全天日射=" + sun.GlobalHorizontalRadiation.ToString("F1") + " W/m2");
//傾斜面を作成（南西の垂直面と東の45°傾斜面）
Incline seInc = new Incline(Incline.Orientation.SE, 0.5 * Math.PI);
Incline wInc = new Incline(Incline.Orientation.W, 0.25 * Math.PI);
//直散分離の手法を取得
Array methods = Enum.GetValues(typeof(Sun.DiffuseAndDirectNormalRadiationEstimatingMethod));
foreach (Sun.DiffuseAndDirectNormalRadiationEstimatingMethod method in methods)
{
//直散分離を実行して太陽に設定
sun.EstimateDiffuseAndDirectNormalRadiation(sun.GlobalHorizontalRadiation, method);
//傾斜面へ入射する直達日射成分を計算する
double cosThetaSE, cosThetaW;
cosThetaSE = seInc.GetDirectSolarRadiationRate(sun);
cosThetaW = wInc.GetDirectSolarRadiationRate(sun);
Console.WriteLine();
Console.WriteLine("直散分離手法 : " + method.ToString());
Console.WriteLine("法線面直達日射=" + sun.DirectNormalRadiation.ToString("F1") + " W/m2");
Console.WriteLine("水平面直達日射=" + (sun.DirectNormalRadiation * Math.Sin(sun.Altitude)).ToString("F1") + " W/m2");
Console.WriteLine("天空日射=" + sun.DiffuseHorizontalRadiation.ToString("F1") + " W/m2");
Console.WriteLine("南西垂直面の直達日射=" + (sun.DirectNormalRadiation * cosThetaSE).ToString("F1") + " W/m2");
Console.WriteLine("東45度面の直達日射=" + (sun.DirectNormalRadiation * cosThetaW).ToString("F1") + " W/m2");
}
Console.Read();
}
/// <summary>気象データ作成処理</summary>
/// <param name="wdataPath">元の気象データのパス</param>
/// <param name="outputPath">変換後の気象データのパス</param>
public static void ReadAndWriteBESTestWeatherData(string wdataPath, string outputPath)
{
bool success;
WeatherDataTable wdTable = TMY1Converter.ToPWeatherData(wdataPath, out success);
using (StreamWriter sWriter = new StreamWriter(outputPath))
{
sWriter.WriteLine("Date,Time,Drybulb temperature[C],Humidity ratio[kg/kg],Dirct normal radiation[W/m2],Global horizontal radiation[W/m2],Diffuse horizontal radiation[W/m2],Cloud cover,Nocturnal radiation[W/m2],Solar altitude[radian],Ground temperature(0.675m)[C],Ground temperature(1.35m)[C],Ground temperature(2.35m)[C]");
ImmutableWeatherRecord wr;
ImmutableWeatherData wd;
DateTime dTime;
//年平均気温、年較差、最大平均気温日の通日を計算
double dbt;
double dbtAve = 0;
double dbtMin = 100;
double dbtMax = -100;
double dbtMinSum = 0;
double dbtMaxSum = 0;
double maxDay = 1;
double daySum = 0;
double maxDaySum = 0;
double[] maxAve = new double[12];
double[] minAve = new double[12];
dTime = new DateTime(1999, 1, 1, 0, 0, 0);
int days = 0;
for (int i = 0; i < wdTable.WeatherRecordNumber; i++)
{
wr = wdTable.GetWeatherRecord(i);
dbt = wr.GetData(WeatherRecord.RecordType.DryBulbTemperature).Value;
dbtAve += dbt;
dbtMin = Math.Min(dbt, dbtMin);
dbtMax = Math.Max(dbt, dbtMax);
daySum += dbt;
if (dTime.Hour == 23)
{
days++;
dbtMaxSum += dbtMax;
dbtMinSum += dbtMin;
dbtMax = -100;
dbtMin = 100;
if (maxDaySum < daySum)
{
maxDaySum = daySum;
maxDay = (i / 24) + 1;
}
daySum = 0;
}
dTime = dTime.AddHours(1);
if ((dTime.Day == 1) && (dTime.Hour == 0))
{
if (dTime.Month == 1)
{
maxAve[11] = dbtMaxSum / days;
minAve[11] = dbtMinSum / days;
}
else
{
maxAve[dTime.Month - 2] = dbtMaxSum / days;
minAve[dTime.Month - 2] = dbtMinSum / days;
}
dbtMaxSum = dbtMinSum = 0;
days = 0;
}
}
dbtAve /= 8760d;
for (int i = 0; i < maxAve.Length; i++)
{
dbtMax = Math.Max(maxAve[i], dbtMax);
dbtMin = Math.Min(minAve[i], dbtMin);
}
Sun sun = new Sun(39.8, 360 - 104.9, 360 - 105);
for (int i = 0; i < wdTable.WeatherRecordNumber; i++)
{
wr = wdTable.GetWeatherRecord(i);
dTime = wr.DataDTime;
sun.Update(dTime.AddMinutes(30));
sWriter.Write(dTime.ToShortDateString() + "," + dTime.ToShortTimeString() + ",");
dbt = wr.GetData(WeatherRecord.RecordType.DryBulbTemperature).Value;
sWriter.Write(dbt + ",");
double dpt = wr.GetData(WeatherRecord.RecordType.DewPointTemperature).Value;
double atm = wr.GetData(WeatherRecord.RecordType.AtmosphericPressure).Value;
double ahd = MoistAir.GetSaturatedHumidityRatio(dpt, MoistAir.Property.DryBulbTemperature, atm);
sWriter.Write(ahd + ",");
wd = wr.GetData(WeatherRecord.RecordType.DirectNormalRadiation);
sWriter.Write(wd.Value + ",");
sun.DirectNormalRadiation = wd.Value;
wd = wr.GetData(WeatherRecord.RecordType.GlobalHorizontalRadiation);
sWriter.Write(wd.Value + ",");
sun.GlobalHorizontalRadiation = wd.Value;
//日の出の場合の補正
if (sun.SunRiseTime.Hour == sun.CurrentDateTime.Hour) sun.Update(sun.CurrentDateTime.AddMinutes(30));
//日没の場合の補正
if (sun.SunSetTime.Hour == sun.CurrentDateTime.Hour) sun.Update(sun.CurrentDateTime.AddMinutes(-30));
sWriter.Write(Math.Max(0, Sun.GetDiffuseHorizontalRadiation(sun.DirectNormalRadiation, sun.GlobalHorizontalRadiation, sun.Altitude)) + ","); ;
wd = wr.GetData(WeatherRecord.RecordType.TotalSkyCover);
double cc;
if (wd.Source == WeatherData.DataSource.MissingValue) cc = 10;
else cc = wd.Value;
sWriter.Write(cc + ",");
double wbp = MoistAir.GetWaterVaporPressure(ahd, atm);
double nr = Sky.GetNocturnalRadiation(dbt, cc, wbp);
sWriter.Write(nr + ",");
//太陽高度
sWriter.Write(sun.Altitude + ",");
//地中温度[C]
double nd = dTime.DayOfYear + dTime.Hour / 24d + (dTime.Minute + 30d) / 24d / 60d;
//0.675m
double tgrz = dbtAve + 0.5 * (dbtMax - dbtMin) * Math.Exp(-0.526 * 0.675) * Math.Cos((nd - maxDay - 30.556 * 0.675) * 0.017214);
sWriter.Write(tgrz + ",");
//1.35m
tgrz = dbtAve + 0.5 * (dbtMax - dbtMin) * Math.Exp(-0.526 * 1.35) * Math.Cos((nd - maxDay - 30.556 * 1.35) * 0.017214);
sWriter.Write(tgrz + ",");
//2.65m
tgrz = dbtAve + 0.5 * (dbtMax - dbtMin) * Math.Exp(-0.526 * 2.65) * Math.Cos((nd - maxDay - 30.556 * 2.65) * 0.017214);
sWriter.Write(tgrz + ",");
sWriter.WriteLine();
dTime = dTime.AddHours(1);
}
}
}
private static void makeGroundCouplingBuilding(out Zone[] rooms, out Wall[] walls, out Window[] windows, out Outdoor[] outdoor, out Sun sun)
{
//放射率
double extswEmissivity = 0.9;
double extlwEmissivity = 0.6;
//表面熱伝達率
double ao = 29.3;
double aowin = 21;
double ai = 8.29;
double ago = 100000;
//室を作成
rooms = new Zone[1];
rooms[0] = new Zone();
rooms[0].Volume = 8 * 6 * 2.7; //室容積[m3]
//内部負荷[W]
rooms[0].AddHeatGain(new ConstantHeatGain(200 * 0.4, 200 * 0.6, 0));
if (CALCULATE_ELEVATION_EFFECT) rooms[0].AtmosphericPressure = MoistAir.GetAtmosphericPressure(1609);
else rooms[0].AtmosphericPressure = 101.325d;
rooms[0].TimeStep = 3600;
rooms[0].InitializeAirState(20, 0.01);
rooms[0].FilmCoefficient = ai;
//対流成分
rooms[0].SetConvectiveRate(3.16 / ai);
//漏気量
rooms[0].VentilationVolume = rooms[0].Volume * 0.5;
if (!CALCULATE_ELEVATION_EFFECT) rooms[0].Volume *= 0.82;
//外界を作成
outdoor = new Outdoor[2];
outdoor[0] = new Outdoor();
outdoor[1] = new Outdoor();
sun = new Sun(39.8, 360 - 104.9, 360 - 105);
outdoor[0].Sun = sun;
//壁構成を作成
WallLayers exwL, flwL, rfwL, grwL;
makeWallLayer(true, out exwL, out flwL, out rfwL);
makeGroundWallLayer(out flwL, out grwL);
//壁表面を作成
WallSurface ews, iws;
//壁リストを作成
walls = new Wall[9];
//屋根を作成
walls[0] = new Wall(rfwL);
walls[0].Name = "屋根";
walls[0].SurfaceArea = 48;
walls[0].SetIncline(new Incline(Incline.Orientation.N, 0), false);
walls[0].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[0].SetFilmCoefficient(ao, false); //外表面総合熱伝達率[W/(m2K)]
walls[0].InitializeTemperature(25);
//壁表面の設定
iws = walls[0].GetSurface(true);
ews = walls[0].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//床を作成
walls[1] = new Wall(flwL);
walls[1].Name = "床";
walls[1].SurfaceArea = 48;
walls[1].SetIncline(new Incline(Incline.Orientation.N, Math.PI), false);
walls[1].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[1].SetFilmCoefficient(ago, false); //外表面総合熱伝達率[W/(m2K)]//地面絶縁体
walls[1].InitializeTemperature(25);
//壁表面の設定
iws = walls[1].GetSurface(true);
ews = walls[1].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[1].AddGroundWallSurface(ews);
//北外壁を作成
walls[2] = new Wall(exwL);
walls[2].Name = "北外壁";
walls[2].SurfaceArea = 8 * 1.35;
walls[2].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), false);
walls[2].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[2].SetFilmCoefficient(ao, false); //外表面総合熱伝達率[W/(m2K)]
walls[2].InitializeTemperature(25);
//壁表面の設定
iws = walls[2].GetSurface(true);
ews = walls[2].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//北外壁（土中）を作成
walls[3] = new Wall(grwL);
walls[3].Name = "北外壁（土中）";
walls[3].SurfaceArea = 8 * 1.35;
walls[3].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), false);
walls[3].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[3].SetFilmCoefficient(ago, false); //外表面総合熱伝達率[W/(m2K)]
walls[3].InitializeTemperature(25);
//壁表面の設定
iws = walls[3].GetSurface(true);
ews = walls[3].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//東外壁を作成
walls[4] = new Wall(exwL);
walls[4].Name = "東外壁";
walls[4].SurfaceArea = 6 * 1.35;
walls[4].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), false);
walls[4].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[4].SetFilmCoefficient(ao, false); //外表面総合熱伝達率[W/(m2K)]
walls[4].InitializeTemperature(25);
//壁表面の設定
iws = walls[4].GetSurface(true);
ews = walls[4].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//東外壁（土中）を作成
walls[5] = new Wall(grwL);
walls[5].Name = "東外壁（土中）";
walls[5].SurfaceArea = 6 * 1.35;
walls[5].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), false);
walls[5].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[5].SetFilmCoefficient(ago, false); //外表面総合熱伝達率[W/(m2K)]
walls[5].InitializeTemperature(25);
//壁表面の設定
iws = walls[5].GetSurface(true);
ews = walls[5].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//西外壁を作成
walls[6] = new Wall(exwL);
walls[6].Name = "西外壁";
walls[6].SurfaceArea = 6 * 1.35;
walls[6].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), false);
walls[6].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[6].SetFilmCoefficient(ao, false); //外表面総合熱伝達率[W/(m2K)]
walls[6].InitializeTemperature(25);
//壁表面の設定
iws = walls[6].GetSurface(true);
ews = walls[6].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//西外壁（土中）を作成
walls[7] = new Wall(grwL);
walls[7].Name = "西外壁（土中）";
walls[7].SurfaceArea = 6 * 1.35;
walls[7].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), false);
walls[7].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[7].SetFilmCoefficient(ago, false); //外表面総合熱伝達率[W/(m2K)]
walls[7].InitializeTemperature(25);
//壁表面の設定
iws = walls[7].GetSurface(true);
ews = walls[7].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//南外壁（土中）
walls[8] = new Wall(grwL);
walls[8].Name = "南外壁（土中）";
walls[8].SurfaceArea = 8 * 1.35;
walls[8].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), false);
walls[8].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[8].SetFilmCoefficient(ago, false); //外表面総合熱伝達率[W/(m2K)]
walls[8].InitializeTemperature(25);
//壁表面の設定
iws = walls[8].GetSurface(true);
ews = walls[8].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//窓を作成
GlassPanes glassPanes = new GlassPanes(0.74745, 0.043078, 1d / (1d / 333 + 1d / 333 + 1d / 6.297));
//glassPanes.LongWaveEmissivity = extlwEmissivity;
//glassPanes.ConvectiveRate = 3.16 / ai;
glassPanes.AngularDependenceCoefficients = new double[] { 1.3930, 5.5401, -19.5736, 19.0379 };
Window window1 = new Window(glassPanes);
Window window2 = new Window(glassPanes);
//長波長吸収率
WindowSurface ws;
ws = window1.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin; //表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
ws = window2.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin; //表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
//対流・放射成分
ws = window1.GetSurface(false);
ws.FilmCoefficient = ai; //表面総合熱伝達率[W/(m2K)]
ws.ConvectiveRate = 3.16 / ai;
ws = window2.GetSurface(false);
ws.FilmCoefficient = ai; //表面総合熱伝達率[W/(m2K)]
ws.ConvectiveRate = 3.16 / ai;
//窓面積
window1.SurfaceArea = 5.4;
window2.SurfaceArea = 5.4;
window1.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
window2.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
//室と外界に追加
rooms[0].AddWindow(window1);
rooms[0].AddWindow(window2);
outdoor[0].AddWindow(window1);
outdoor[0].AddWindow(window2);
windows = new Window[] { window1, window2 };
//短波長放射入射比率を設定
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.642); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.168); //天井面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.038 * 0.5); //東面
rooms[0].SetShortWaveRadiationRate(walls[6].GetSurface(true), 0.038 * 0.5); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.053 * 0.5); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.038 * 0.5); //東面（土中）
rooms[0].SetShortWaveRadiationRate(walls[7].GetSurface(true), 0.038 * 0.5); //西面（土中）
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.053 * 0.5); //北面（土中）
rooms[0].SetShortWaveRadiationRate(walls[8].GetSurface(true), 0.026 * 10.8 / 9.6); //南面（土中）
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.0175 * 10.8 / 12d);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.0175 * 10.8 / 12d);
}
//対流成分設定
rooms[0].SetConvectiveRate(3.16 / ai);
outdoor[0].SetConvectiveRate(24.67 / ao);
}
private static void makeSunZoneBuilding(out Zone[] rooms, out Wall[] walls, out Window[] windows, out Outdoor[] outdoor, out Sun sun)
{
const double ai = 8.29;
const double ao = 29.3;
const double aowin = 21;
const double extswEmissivity = 0.6d;
const double extlwEmissivity = 0.9d;
//室を作成
rooms = new Zone[2];
//BackZoneを作成
rooms[0] = new Zone();
rooms[0].Volume = 8 * 6 * 2.7; //室容積[m3]
//内部負荷[W]
rooms[0].AddHeatGain(new ConstantHeatGain(200 * 0.4, 200 * 0.6, 0));
if (CALCULATE_ELEVATION_EFFECT) rooms[0].AtmosphericPressure = MoistAir.GetAtmosphericPressure(1609);
else rooms[0].AtmosphericPressure = 101.325d;
rooms[0].TimeStep = 3600;
rooms[0].InitializeAirState(20, 0.01);
rooms[0].FilmCoefficient = ai;
//対流成分
rooms[0].SetConvectiveRate(3.16 / ai);
//漏気量
rooms[0].VentilationVolume = rooms[0].Volume * 0.5;
if (!CALCULATE_ELEVATION_EFFECT) rooms[0].Volume *= 0.82;
//SunZoneを作成
rooms[1] = new Zone();
rooms[1].Volume = 8 * 2 * 2.7; //室容積[m3]
if (CALCULATE_ELEVATION_EFFECT) rooms[1].AtmosphericPressure = MoistAir.GetAtmosphericPressure(1609);
else rooms[1].AtmosphericPressure = 101.325d;
rooms[1].TimeStep = 3600;
rooms[1].InitializeAirState(20, 0.01);
rooms[1].FilmCoefficient = ai;
//対流成分
rooms[1].SetConvectiveRate(3.16 / ai);
//漏気量
rooms[1].VentilationVolume = rooms[1].Volume * 0.5;
if (!CALCULATE_ELEVATION_EFFECT) rooms[1].Volume *= 0.82;
//外界を作成
outdoor = new Outdoor[2];
outdoor[0] = new Outdoor();
outdoor[0].GroundTemperature = 10;
sun = new Sun(39.8, 360 - 104.9, 360 - 105);
outdoor[0].Sun = sun;
//壁構成を作成
WallLayers exwLL, flwLL, rfwLL, exwLH, flwLH, rfwLH;
makeWallLayer(true, out exwLL, out flwLL, out rfwLL);
makeWallLayer(true, out exwLH, out flwLH, out rfwLH);
//壁表面を作成
WallSurface ews, iws;
//壁を作成
walls = new Wall[11];
//屋根を作成1
walls[0] = new Wall(rfwLL);
walls[0].Name = "屋根";
walls[0].SurfaceArea = 48;
walls[0].SetIncline(new Incline(Incline.Orientation.N, 0), false);
walls[0].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[0].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[0].InitializeTemperature(25);
//壁表面の設定
iws = walls[0].GetSurface(true);
ews = walls[0].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//屋根を作成2
walls[1] = new Wall(rfwLH);
walls[1].Name = "屋根";
walls[1].SurfaceArea = 16;
walls[1].SetIncline(new Incline(Incline.Orientation.N, 0), false);
walls[1].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[1].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[1].InitializeTemperature(25);
//壁表面の設定
iws = walls[1].GetSurface(true);
ews = walls[1].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
rooms[1].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//床を作成1
walls[2] = new Wall(flwLL);
walls[2].Name = "床";
walls[2].SurfaceArea = 48;
walls[2].SetIncline(new Incline(Incline.Orientation.N, Math.PI), false);
walls[2].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[2].SetFilmCoefficient(0.04, false);//外表面総合熱伝達率[W/(m2K)]//地面絶縁体
walls[2].InitializeTemperature(25);
//壁表面の設定
iws = walls[2].GetSurface(true);
ews = walls[2].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//床を作成2
walls[3] = new Wall(flwLH);
walls[3].Name = "床";
walls[3].SurfaceArea = 8 * 2;
walls[3].SetIncline(new Incline(Incline.Orientation.N, Math.PI), false);
walls[3].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[3].SetFilmCoefficient(0.04, false);//外表面総合熱伝達率[W/(m2K)]//地面絶縁体
walls[3].InitializeTemperature(25);
//壁表面の設定
iws = walls[3].GetSurface(true);
ews = walls[3].GetSurface(false);
rooms[1].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//北外壁を作成
walls[4] = new Wall(exwLL);
walls[4].Name = "北外壁";
walls[4].SurfaceArea = 8 * 2.7;
walls[4].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), false);
walls[4].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[4].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[4].InitializeTemperature(25);
//壁表面の設定
iws = walls[4].GetSurface(true);
ews = walls[4].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//南外壁を作成
walls[5] = new Wall(exwLH);
walls[5].Name = "南外壁";
walls[5].SurfaceArea = 8 * 2.7 - 6d - 6d;
walls[5].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), false);
walls[5].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[5].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[5].InitializeTemperature(25);
//壁表面の設定
iws = walls[5].GetSurface(true);
ews = walls[5].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[1].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//東外壁を作成1
walls[6] = new Wall(exwLL);
walls[6].Name = "東外壁";
walls[6].SurfaceArea = 6 * 2.7;
walls[6].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), false);
walls[6].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[6].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[6].InitializeTemperature(25);
//壁表面の設定
iws = walls[6].GetSurface(true);
ews = walls[6].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//東外壁を作成2
walls[7] = new Wall(exwLH);
walls[7].Name = "東外壁";
walls[7].SurfaceArea = 2 * 2.7;
walls[7].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), false);
walls[7].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[7].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[7].InitializeTemperature(25);
//壁表面の設定
iws = walls[7].GetSurface(true);
ews = walls[7].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[1].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//西外壁を作成1
walls[8] = new Wall(exwLL);
walls[8].Name = "西外壁";
walls[8].SurfaceArea = 6 * 2.7;
walls[8].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), false);
walls[8].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[8].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[8].InitializeTemperature(25);
//壁表面の設定
iws = walls[8].GetSurface(true);
ews = walls[8].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//西外壁を作成2
walls[9] = new Wall(exwLH);
walls[9].Name = "西外壁";
walls[9].SurfaceArea = 2 * 2.7;
walls[9].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), false);
walls[9].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[9].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[9].InitializeTemperature(25);
//壁表面の設定
iws = walls[9].GetSurface(true);
ews = walls[9].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[1].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//共用壁を作成
WallLayers.Layer layer = new WallLayers.Layer(new WallMaterial("CommonWall", 0.510, 1400d * 1000d / 1000d), 0.2, 4);
WallLayers cWL = new WallLayers();
cWL.AddLayer(layer);
walls[10] = new Wall(cWL);
walls[10].Name = "共用壁";
walls[10].SurfaceArea = 8 * 2.7;
walls[10].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), false);
walls[10].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[10].SetFilmCoefficient(ai, false);//内表面総合熱伝達率[W/(m2K)]
walls[10].InitializeTemperature(25);
//壁表面の設定
iws = walls[10].GetSurface(true);
ews = walls[10].GetSurface(false);
rooms[0].AddSurface(iws);
rooms[1].AddSurface(ews);
//窓の作成
GlassPanes glassPane = new GlassPanes(0.74745, 0.043078, 1d / (1d / 333 + 1d / 333 + 1d / 6.297));
//glassPane.LongWaveEmissivity = extlwEmissivity;
//glassPane.ConvectiveRate = 3.16 / ai;
glassPane.AngularDependenceCoefficients = new double[] { 1.3930, 5.5401, -19.5736, 19.0379 };
Window window1 = new Window(glassPane);
Window window2 = new Window(glassPane);
//長波長吸収率・アルベド
WindowSurface ws;
ws = window1.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin;//表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
ws = window2.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin;//表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
//対流・放射成分
ws = window1.GetSurface(false);
ws.ConvectiveRate = 3.16 / ai;
ws.FilmCoefficient = ai;//表面総合熱伝達率[W/(m2K)]
ws = window2.GetSurface(false);
ws.ConvectiveRate = 3.16 / ai;
ws.FilmCoefficient = ai;//表面総合熱伝達率[W/(m2K)]
//窓面積
window1.SurfaceArea = 6;
window2.SurfaceArea = 6;
window1.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
window2.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
//室と外界に追加
rooms[1].AddWindow(window1);
rooms[1].AddWindow(window2);
outdoor[0].AddWindow(window1);
outdoor[0].AddWindow(window2);
windows = new Window[] { window1, window2 };
//放射率
rooms[1].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.6); //床面
rooms[1].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.06); //天井面
rooms[1].SetShortWaveRadiationRate(walls[7].GetSurface(true), 0.02); //東面
rooms[1].SetShortWaveRadiationRate(walls[9].GetSurface(true), 0.02); //西面
rooms[1].SetShortWaveRadiationRate(walls[10].GetSurface(false), 0.2); //北面
rooms[1].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.03); //南面
rooms[1].SetShortWaveRadiationRate(window1, 0.035);
rooms[1].SetShortWaveRadiationRate(window2, 0.035);
rooms[1].ControlDrybulbTemperature = false;
//対流成分設定
rooms[0].SetConvectiveRate(3.16 / ai);
rooms[1].SetConvectiveRate(3.16 / ai);
outdoor[0].SetConvectiveRate(24.67 / ao);
}
private static void makeBuilding(TestCase tCase, out Zone[] rooms, out Wall[] walls, out Window[] windows, out Outdoor[] outdoor, out Sun sun)
{
if (tCase == TestCase.C960)
{
makeSunZoneBuilding(out rooms, out walls, out windows, out outdoor, out sun);
return;
}
else if (tCase == TestCase.C990)
{
makeGroundCouplingBuilding(out rooms, out walls, out windows, out outdoor, out sun);
return;
}
bool hasEWWindow = (tCase & TestCase.HasEWWindow) == tCase;
bool hasSunShade = (tCase & TestCase.HasSunShade) == tCase;
bool hasHeatGain = (tCase & TestCase.HasHeatGain) == tCase;
bool hasHighConcuctanceWall = (tCase & TestCase.HasHighConcuctanceWall) == tCase;
bool isLowIntIREmissivity = (tCase & TestCase.LowIntIREmissivity) == tCase;
bool isLowExtIREmissivity = (tCase & TestCase.LowExtIREmissivity) == tCase;
bool isLowIntSWEmissivity = (tCase & TestCase.LowIntSWEmissivity) == tCase;
bool isHighIntSWEmissivity = (tCase & TestCase.HighIntSWEmissivity) == tCase;
bool noInfiltration = (tCase & TestCase.NoInfiltration) == tCase;
bool isLowExtSWEmissivity = (tCase & TestCase.LowExtSWEmissivity) == tCase;
bool isHeavyWeight = (tCase & TestCase.HeavyWeight) == tCase;
bool noWindow = (tCase & TestCase.NoWindow) == tCase;
//放射率
double extswEmissivity, extlwEmissivity;
if (isLowExtIREmissivity) extlwEmissivity = 0.1;
else extlwEmissivity = 0.9;
if (tCase == TestCase.C250) extswEmissivity = 0.9;
else if (isLowExtSWEmissivity) extswEmissivity = 0.1;
else extswEmissivity = 0.6;
//表面熱伝達率
double ao, aowin, ai;
if (isLowExtIREmissivity)
{
ao = 25.2;
aowin = 16.9;
}
else
{
ao = 29.3;
aowin = 21;
}
if (isLowIntIREmissivity) ai = 3.73;
else ai = 8.29;
//室を作成
rooms = new Zone[1];
rooms[0] = new Zone();
rooms[0].Volume = 8 * 6 * 2.7; //室容積[m3]
//内部負荷[W]
if (hasHeatGain) rooms[0].AddHeatGain(new ConstantHeatGain(200 * 0.4, 200 * 0.6, 0));
if (CALCULATE_ELEVATION_EFFECT) rooms[0].AtmosphericPressure = MoistAir.GetAtmosphericPressure(1609);
else rooms[0].AtmosphericPressure = 101.325d;
rooms[0].TimeStep = 3600;
rooms[0].InitializeAirState(20, 0.01);
rooms[0].FilmCoefficient = ai;
//対流成分
rooms[0].SetConvectiveRate(3.16 / ai);
//漏気量
if (tCase == TestCase.C230) rooms[0].VentilationVolume = rooms[0].Volume;
else if (noInfiltration) rooms[0].VentilationVolume = 0;
else rooms[0].VentilationVolume = rooms[0].Volume * 0.5;
if (!CALCULATE_ELEVATION_EFFECT) rooms[0].VentilationVolume *= 0.82;
//外界を作成
outdoor = new Outdoor[2];
outdoor[0] = new Outdoor();
outdoor[0].GroundTemperature = 10;
sun = new Sun(39.8, 360 - 104.9, 360 - 105);
outdoor[0].Sun = sun;
//壁構成を作成
WallLayers exwL, flwL, rfwL;
makeWallLayer(!isHeavyWeight, out exwL, out flwL, out rfwL);
//壁表面を作成
WallSurface ews, iws;
//壁リストを作成
if (hasHighConcuctanceWall) walls = new Wall[7];
else walls = new Wall[6];
//屋根を作成
walls[0] = new Wall(rfwL);
walls[0].Name = "屋根";
walls[0].SurfaceArea = 48;
walls[0].SetIncline(new Incline(Incline.Orientation.N, 0), false);
walls[0].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[0].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[0].InitializeTemperature(25);
//壁表面の設定
iws = walls[0].GetSurface(true);
ews = walls[0].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//床を作成
walls[1] = new Wall(flwL);
walls[1].Name = "床";
walls[1].SurfaceArea = 48;
walls[1].SetIncline(new Incline(Incline.Orientation.N, Math.PI), false);
walls[1].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[1].SetFilmCoefficient(0.04, false);//外表面総合熱伝達率[W/(m2K)]//地面絶縁体
walls[1].InitializeTemperature(25);
//壁表面の設定
iws = walls[1].GetSurface(true);
ews = walls[1].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//北外壁を作成
walls[2] = new Wall(exwL);
walls[2].Name = "北外壁";
walls[2].SurfaceArea = 8 * 2.7;
walls[2].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), false);
walls[2].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[2].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[2].InitializeTemperature(25);
//壁表面の設定
iws = walls[2].GetSurface(true);
ews = walls[2].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//東外壁を作成
walls[3] = new Wall(exwL);
walls[3].Name = "東外壁";
if (hasEWWindow) walls[3].SurfaceArea = 6 * 2.7 - 6;
else walls[3].SurfaceArea = 6 * 2.7;
walls[3].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), false);
walls[3].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[3].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[3].InitializeTemperature(25);
//壁表面の設定
iws = walls[3].GetSurface(true);
ews = walls[3].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//西外壁を作成
walls[4] = new Wall(exwL);
walls[4].Name = "西外壁";
if (hasEWWindow) walls[4].SurfaceArea = 6 * 2.7 - 6;
else walls[4].SurfaceArea = 6 * 2.7;
walls[4].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), false);
walls[4].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[4].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[4].InitializeTemperature(25);
//壁表面の設定
iws = walls[4].GetSurface(true);
ews = walls[4].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//南外壁を作成
walls[5] = new Wall(exwL);
walls[5].Name = "南外壁";
if (noWindow || hasEWWindow) walls[5].SurfaceArea = 8 * 2.7;
else walls[5].SurfaceArea = 8 * 2.7 - 6d - 6d;
walls[5].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), false);
walls[5].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[5].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[5].InitializeTemperature(25);
//壁表面の設定
iws = walls[5].GetSurface(true);
ews = walls[5].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//窓を作成
if (!noWindow && !hasHighConcuctanceWall)
{
GlassPanes glassPane = new GlassPanes(0.74745, 0.043078, 1d / (1d / 333 + 1d / 333 + 1d / 6.297));
//glassPane.LongWaveEmissivity = extlwEmissivity;
//glassPane.ConvectiveRate = 3.16 / ai;
glassPane.AngularDependenceCoefficients = new double[] { 1.3930, 5.5401, -19.5736, 19.0379 };
Window window1 = new Window(glassPane);
Window window2 = new Window(glassPane);
//長波長吸収率・アルベド
WindowSurface ws;
ws = window1.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin;//表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
ws = window2.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin;//表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
//対流・放射成分
ws = window1.GetSurface(false);
ws.ConvectiveRate = 3.16 / ai;
ws.FilmCoefficient = ai;//表面総合熱伝達率[W/(m2K)]
ws = window2.GetSurface(false);
ws.ConvectiveRate = 3.16 / ai;
ws.FilmCoefficient = ai;//表面総合熱伝達率[W/(m2K)]
//窓面積
window1.SurfaceArea = 6;
window2.SurfaceArea = 6;
if (hasEWWindow)
{
window1.OutSideIncline = new Incline(Incline.Orientation.E, 0.5 * Math.PI);
window2.OutSideIncline = new Incline(Incline.Orientation.W, 0.5 * Math.PI);
if (hasSunShade)
{
window1.Shade = SunShade.MakeGridSunShade(3, 2, 1, 0, 0, 0, 0, window1.OutSideIncline);
window2.Shade = SunShade.MakeGridSunShade(3, 2, 1, 0, 0, 0, 0, window2.OutSideIncline);
}
}
else
{
window1.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
window2.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
if (hasSunShade)
{
window1.Shade = SunShade.MakeHorizontalSunShade(3, 2, 1, 4.5, 0.5, 0.5, window1.OutSideIncline);
window2.Shade = SunShade.MakeHorizontalSunShade(3, 2, 1, 0.5, 4.5, 0.5, window2.OutSideIncline);
}
}
//室と外界に追加
rooms[0].AddWindow(window1);
rooms[0].AddWindow(window2);
outdoor[0].AddWindow(window1);
outdoor[0].AddWindow(window2);
windows = new Window[] { window1, window2 };
}
else windows = new Window[0];
//HighConductanceWallを作成
if (hasHighConcuctanceWall)
{
walls[6] = new Wall(makeHighConductanceWall());
walls[6].SurfaceArea = 12;
walls[6].SetIncline(new Incline(Incline.Orientation.S, 0), false);
walls[6].SetFilmCoefficient(ai, true);
walls[6].SetFilmCoefficient(aowin, false);
walls[6].InitializeTemperature(25);
//壁表面の設定
iws = walls[6].GetSurface(true);
ews = walls[6].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
}
//短波長放射入射比率を設定
if (hasEWWindow)
{
if (isLowIntSWEmissivity)
{
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.642); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.168); //天井面
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.025); //東面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.025); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.0525); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.0525); //南面
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.0175);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.0175);
}
}
else
{
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.651); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.177); //天井面
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.027); //東面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.027); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.056); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.056); //南面
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.003);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.003);
}
}
}
else
{
if (isLowIntSWEmissivity)
{
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.244); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.192); //天井面
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.057); //東面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.057); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.082); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.065); //南面
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.152);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.152);
}
}
else if (isHighIntSWEmissivity)
{
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.651); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.177); //天井面
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.041); //東面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.041); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.056); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.028); //南面
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.003);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.003);
}
}
else
{
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.642); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.168); //天井面
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.038); //東面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.038); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.053); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.026); //南面
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.026);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.026);
}
}
}
//対流成分設定
rooms[0].SetConvectiveRate(3.16 / ai);
outdoor[0].SetConvectiveRate(24.67 / ao);
//HighConductanceWallの対流成分
if (hasHighConcuctanceWall)
{
ews = walls[6].GetSurface(false);
ews.ConvectiveRate = 16.37 / aowin;
}
}
static void Main(string[] args)
{
//makeWeatherData();
//Create an instance of the Outdoor class
Outdoor outdoor = new Outdoor();
Sun sun = new Sun(Sun.City.Tokyo); //Located in Tokyo
outdoor.Sun = sun;
outdoor.GroundTemperature = 20; //Ground temperature is assumed to be constant
//Create an instance of the Incline class
Dictionary<string, Incline> inclines = new Dictionary<string, Incline>();
inclines.Add("N", new Incline(Incline.Orientation.N, 0.5 * Math.PI)); //North, Vertical
inclines.Add("E", new Incline(Incline.Orientation.E, 0.5 * Math.PI)); //East, Vertical
inclines.Add("W", new Incline(Incline.Orientation.W, 0.5 * Math.PI)); //West, Vertical
inclines.Add("S", new Incline(Incline.Orientation.S, 0.5 * Math.PI)); //South, Vertical
inclines.Add("H", new Incline(Incline.Orientation.S, 0)); //Horizontal
//壁層を作成
Dictionary<string, WallLayers> wallLayers;
makeWallLayers(out wallLayers);
//室を作成
Dictionary<string, Zone> zones;
makeZones(out zones);
//窓を作成
Dictionary<string, Window> windows;
Dictionary<string, Wall> frames;
makeWindows(zones, inclines, outdoor, wallLayers, out windows, out frames);
//建具を作成
Dictionary<string, Wall> doors;
makeDoors(zones, wallLayers, inclines, outdoor, out doors);
//外壁を作成
Dictionary<string, Wall> exWalls;
makeExWalls(zones, wallLayers, inclines, windows, frames, doors, outdoor, out exWalls);
//内壁を作成
Dictionary<string, Wall> inWalls;
makeInWalls(zones, wallLayers, doors, out inWalls);
//床を作成
Dictionary<string, Wall> floors;
makeFloors(zones, wallLayers, out floors);
//Creat an insances of the Room class and MultiRoom class
List<Room> rooms = new List<Room>();
foreach (string key in zones.Keys) rooms.Add(new Room(new Zone[] { zones[key] }));
MultiRoom mRoom = new MultiRoom(rooms.ToArray());
mRoom.SetTimeStep(TIME_STEP);
//換気経路を設定
setAirFlow(mRoom, zones);
//空調制御OFF
foreach (string key in zones.Keys) zones[key].ControlDrybulbTemperature = false;
//Output title wrine to standard output stream
using (StreamWriter sWriter = new StreamWriter("out.csv", false, Encoding.GetEncoding("Shift_JIS")))
{
sWriter.Write("日時,");
foreach (string key in zones.Keys) sWriter.Write(zones[key].Name + "室温[C], " + zones[key].Name + "顕熱負荷[W], ");
sWriter.WriteLine();
DateTime dTime = new DateTime(1999, 11, 1, 0, 0, 0);
List<string[]> wData = new List<string[]>();
using (StreamReader sReader = new StreamReader("weather.csv"))
{
//タイトル行
sReader.ReadLine();
string strBuff;
while ((strBuff = sReader.ReadLine()) != null) wData.Add(strBuff.Split(','));
}
//反復計算
int iterNum = 0;
bool iter = true;
bool output = false;
double lastTemp = 9999;
while (iter)
{
iterNum++;
if (output) iter = false;
for (int j = 0; j < wData.Count; j++)
{
string[] strData = wData[j];
dTime = DateTime.Parse(strData[0]);
sun.Update(dTime);
mRoom.SetCurrentDateTime(dTime);
//Set weather state.
outdoor.AirState = new MoistAir(double.Parse(strData[1]), double.Parse(strData[2]));
outdoor.NocturnalRadiation = double.Parse(strData[5]);
outdoor.GroundTemperature = double.Parse(strData[1]);
sun.SetGlobalHorizontalRadiation(double.Parse(strData[3]), double.Parse(strData[4]));
//Set ventilation air state.
foreach (string key in zones.Keys) zones[key].VentilationAirState = outdoor.AirState;
//空調制御
setHVACControl(dTime, zones);
//Update boundary state of outdoor facing surfaces.
outdoor.SetWallSurfaceBoundaryState();
//Update the walls.
foreach (string key in frames.Keys) frames[key].Update();
foreach (string key in doors.Keys) doors[key].Update();
foreach (string key in exWalls.Keys) exWalls[key].Update();
foreach (string key in inWalls.Keys) inWalls[key].Update();
foreach (string key in floors.Keys) floors[key].Update();
//Update the MultiRoom object.
mRoom.UpdateRoomTemperatures();
mRoom.UpdateRoomHumidities();
if (output)
{
sWriter.Write(dTime.ToString() + ",");
foreach (string key in zones.Keys) sWriter.Write(zones[key].CurrentDrybulbTemperature + ", " + zones[key].CurrentSensibleHeatLoad + ", ");
sWriter.WriteLine();
}
}
double err = Math.Abs(zones["床下"].CurrentDrybulbTemperature - lastTemp);
if (err < 0.01) output = true;
lastTemp = zones["床下"].CurrentDrybulbTemperature;
Console.WriteLine(iterNum + ":" + err);
}
}
}
/// <summary>Sample program calculating the air state and heat load of the building (MultiRoom class)</summary>
private static void AirStateAndHeatLoadTest2()
{
//A sample weather data
//Drybulb temperature [C]
double[] dbt = new double[] { 24.2, 24.1, 24.1, 24.2, 24.3, 24.2, 24.4, 25.1, 26.1, 27.1, 28.8, 29.9,
30.7, 31.2, 31.6, 31.4, 31.3, 30.8, 29.4, 28.1, 27.5, 27.1, 26.6, 26.3 };
//Humidity ratio [kg/kg(DA)]
double[] hum = new double[] { 0.0134, 0.0136, 0.0134, 0.0133, 0.0131, 0.0134, 0.0138, 0.0142, 0.0142, 0.0140, 0.0147, 0.0149,
0.0142, 0.0146, 0.0140, 0.0145, 0.0144, 0.0146, 0.0142, 0.0136, 0.0136, 0.0135, 0.0136, 0.0140 };
//Nocturnal radiation [W/m2]
double[] nrd = new double[] { 32, 30, 30, 29, 26, 24, 24, 25, 25, 25, 24, 24, 24, 23, 24, 24, 24, 24, 23, 23, 24, 26, 25, 23 };
//Direct normal radiation [W/m2]
double[] dnr = new double[] { 0, 0, 0, 0, 0, 0, 106, 185, 202, 369, 427, 499, 557, 522, 517, 480, 398, 255, 142, 2, 0, 0, 0, 0 };
//Diffuse horizontal radiation [W/m2]
double[] drd = new double[] { 0, 0, 0, 0, 0, 0, 36, 115, 198, 259, 314, 340, 340, 349, 319, 277, 228, 167, 87, 16, 0, 0, 0, 0 };
//Create an instance of the Outdoor class
Outdoor outdoor = new Outdoor();
Sun sun = new Sun(Sun.City.Tokyo); //Located in Tokyo
outdoor.Sun = sun;
outdoor.GroundTemperature = 25; //Ground temperature is assumed to be constant
//Create an instance of the Incline class
Incline nIn = new Incline(Incline.Orientation.N, 0.5 * Math.PI); //North, Vertical
Incline eIn = new Incline(Incline.Orientation.E, 0.5 * Math.PI); //East, Vertical
Incline wIn = new Incline(Incline.Orientation.W, 0.5 * Math.PI); //West, Vertical
Incline sIn = new Incline(Incline.Orientation.S, 0.5 * Math.PI); //South, Vertical
Incline hIn = new Incline(Incline.Orientation.S, 0); //Horizontal
//Create an instance of the Zone class
Zone[] zones = new Zone[4];
Zone wpZone = zones[0] = new Zone("West perimeter zone");
wpZone.Volume = 3 * 5 * 3; //Ceiling height is 3m
Zone wiZone = zones[1] = new Zone("West interior zone");
wiZone.Volume = 4 * 5 * 3;
Zone epZone = zones[2] = new Zone("East perimeter zone");
epZone.Volume = 3 * 5 * 3;
Zone eiZone = zones[3] = new Zone("East interior zone");
eiZone.Volume = 4 * 5 * 3;
foreach (Zone zn in zones)
{
zn.VentilationVolume = 10; //Ventilation volume[CMH]
zn.TimeStep = 3600;
zn.DrybulbTemperatureSetPoint = 26;
zn.HumidityRatioSetPoint = 0.01;
}
//Set a heat production element to the east interior zone
//Convective sensible heat=100W, Radiative sensible heat=100W, Latent heat=20W
eiZone.AddHeatGain(new ConstantHeatGain(100, 100, 20));
//Create an instance of the WallLayers class : Concrete,400mm
WallLayers wl = new WallLayers();
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.ReinforcedConcrete), 0.4));
//Create an instance of the GlassPanes class:Low-emissivity coating single glass
GlassPanes gPanes = new GlassPanes(new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.HeatReflectingGlass06mm));
//Set wall surfaces to the zone objects
Wall[] walls = new Wall[18];
List<WallSurface> outdoorSurfaces = new List<WallSurface>();
Wall wpwWall = walls[0] = new Wall(wl, "West wall in the west perimeter zone");
wpwWall.SurfaceArea = 3 * 3;
outdoorSurfaces.Add(wpwWall.GetSurface(true));
wpZone.AddSurface(wpwWall.GetSurface(false));
wpwWall.SetIncline(wIn, true);
Wall wpcWall = walls[1] = new Wall(wl, "Ceiling in the west perimeter zone");
wpcWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(wpcWall.GetSurface(true));
wpZone.AddSurface(wpcWall.GetSurface(false));
wpcWall.SetIncline(hIn, true);
Wall wpfWall = walls[2] = new Wall(wl, "Floor in the west perimeter zone");
wpfWall.SurfaceArea = 3 * 5;
outdoor.AddGroundWallSurface(wpfWall.GetSurface(true));
wpZone.AddSurface(wpfWall.GetSurface(false));
Wall winWall = walls[3] = new Wall(wl, "North wall in the west interior zone");
winWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(winWall.GetSurface(true));
wiZone.AddSurface(winWall.GetSurface(false));
winWall.SetIncline(nIn, true);
Wall wiwWall = walls[4] = new Wall(wl, "West wall in the west interior zone");
wiwWall.SurfaceArea = 3 * 4;
outdoorSurfaces.Add(wiwWall.GetSurface(true));
wiZone.AddSurface(wiwWall.GetSurface(false));
wiwWall.SetIncline(wIn, true);
Wall wicWall = walls[5] = new Wall(wl, "Ceiling in the west interior zone");
wicWall.SurfaceArea = 4 * 5;
outdoorSurfaces.Add(wicWall.GetSurface(true));
wiZone.AddSurface(wicWall.GetSurface(false));
wicWall.SetIncline(hIn, true);
Wall wifWall = walls[6] = new Wall(wl, "Floor in the west interior zone");
wifWall.SurfaceArea = 4 * 5;
outdoor.AddGroundWallSurface(wifWall.GetSurface(true));
wiZone.AddSurface(wifWall.GetSurface(false));
Wall epwWall = walls[7] = new Wall(wl, "East wall in the east perimeter zone");
epwWall.SurfaceArea = 3 * 3;
outdoorSurfaces.Add(epwWall.GetSurface(true));
epZone.AddSurface(epwWall.GetSurface(false));
epwWall.SetIncline(eIn, true);
Wall epcWall = walls[8] = new Wall(wl, "Ceiling in the east perimeter zone");
epcWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(epcWall.GetSurface(true));
epZone.AddSurface(epcWall.GetSurface(false));
epcWall.SetIncline(hIn, true);
Wall epfWall = walls[9] = new Wall(wl, "Floor in the east perimeter zone");
epfWall.SurfaceArea = 3 * 5;
outdoor.AddGroundWallSurface(epfWall.GetSurface(true));
epZone.AddSurface(epfWall.GetSurface(false));
Wall einWall = walls[10] = new Wall(wl, "North wall in the east interior zone");
einWall.SurfaceArea = 5 * 3;
outdoorSurfaces.Add(einWall.GetSurface(true));
eiZone.AddSurface(einWall.GetSurface(false));
einWall.SetIncline(nIn, true);
Wall eiwWall = walls[11] = new Wall(wl, "East wall in the east interior zone");
eiwWall.SurfaceArea = 4 * 3;
outdoorSurfaces.Add(eiwWall.GetSurface(true));
eiZone.AddSurface(eiwWall.GetSurface(false));
eiwWall.SetIncline(eIn, true);
Wall eicWall = walls[12] = new Wall(wl, "Ceiling in the east interior zone");
eicWall.SurfaceArea = 4 * 5;
outdoorSurfaces.Add(eicWall.GetSurface(true));
eiZone.AddSurface(eicWall.GetSurface(false));
eicWall.SetIncline(hIn, true);
Wall eifWall = walls[13] = new Wall(wl, "Floor in the east interior zone");
eifWall.SurfaceArea = 4 * 5;
outdoor.AddGroundWallSurface(eifWall.GetSurface(true));
eiZone.AddSurface(eifWall.GetSurface(false));
Wall cpWall = walls[14] = new Wall(wl, "Inner wall at perimeter");
cpWall.SurfaceArea = 3 * 3;
wpZone.AddSurface(cpWall.GetSurface(true));
epZone.AddSurface(cpWall.GetSurface(false));
Wall ciWall = walls[15] = new Wall(wl, "Inner wall at interior");
ciWall.SurfaceArea = 4 * 3;
wiZone.AddSurface(ciWall.GetSurface(true));
eiZone.AddSurface(ciWall.GetSurface(false));
Wall wpsWall = walls[16] = new Wall(wl, "South wall in the west perimeter zone");
wpsWall.SurfaceArea = 5 * 3 - 3 * 2; //Reduce window surface area
outdoorSurfaces.Add(wpsWall.GetSurface(true));
wpZone.AddSurface(wpsWall.GetSurface(false));
wpsWall.SetIncline(sIn, true);
Wall epsWall = walls[17] = new Wall(wl, "South wall in the east perimeter zone");
epsWall.SurfaceArea = 5 * 3 - 3 * 2; //Reduce window surface area
outdoorSurfaces.Add(epsWall.GetSurface(true));
epZone.AddSurface(epsWall.GetSurface(false));
epsWall.SetIncline(sIn, true);
//Initialize outdoor surfaces
foreach (WallSurface ws in outdoorSurfaces)
{
//Add wall surfaces to Outdoor object
outdoor.AddWallSurface(ws);
//Initialize emissivity of surface
ws.InitializeEmissivity(WallSurface.SurfaceMaterial.Concrete);
}
//Add windows to the west zone
Window wWind = new Window(gPanes, "Window in the west perimeter zone");
wWind.SurfaceArea = 3 * 2;
wpZone.AddWindow(wWind);
outdoor.AddWindow(wWind);
//Add windows to the east zone
Window eWind = new Window(gPanes, "Window in the east perimeter zone");
eWind.SurfaceArea = 3 * 2;
//Set horizontal sun shade.
eWind.Shade = SunShade.MakeHorizontalSunShade(3, 2, 1, 1, 1, 0.5, sIn);
wpZone.AddWindow(eWind);
outdoor.AddWindow(eWind);
//Creat an insances of the Room class and MultiRoom class
Room eRm = new Room(new Zone[] { epZone, eiZone }); //East room
Room wRm = new Room(new Zone[] { wpZone, wiZone }); //Weast room
MultiRoom mRoom = new MultiRoom(new Room[] { eRm, wRm }); //Multi room (east and west rooms)
mRoom.SetTimeStep(3600);
//Set ventilation volume
wpZone.VentilationVolume = 10; //Only west perimeter zone has outdoor air ventilation
mRoom.SetAirFlow(wpZone, wiZone, 10);
mRoom.SetAirFlow(epZone, eiZone, 10);
mRoom.SetAirFlow(eiZone, epZone, 10);
//Set short wave radiation distribution:60% of short wave is distributed to perimeter floor.
double sfSum = 0;
foreach (ISurface isf in eRm.GetSurface()) sfSum += isf.Area;
sfSum -= epfWall.SurfaceArea;
foreach (ISurface isf in eRm.GetSurface()) eRm.SetShortWaveRadiationRate(isf, isf.Area / sfSum * 0.4);
eRm.SetShortWaveRadiationRate(epfWall.GetSurface(false), 0.6);
sfSum = 0;
foreach (ISurface isf in wRm.GetSurface()) sfSum += isf.Area;
sfSum -= wpfWall.SurfaceArea;
foreach (ISurface isf in wRm.GetSurface()) wRm.SetShortWaveRadiationRate(isf, isf.Area / sfSum * 0.4);
wRm.SetShortWaveRadiationRate(wpfWall.GetSurface(false), 0.6);
//Output title wrine to standard output stream
StreamWriter sWriter = new StreamWriter("AirStateAndHeatLoadTest2.csv");
foreach (Zone zn in zones) sWriter.Write(zn.Name + "Drybulb temperature[C], " + zn.Name +
"Humidity ratio[kg/kgDA], " + zn.Name + "Sensible heat load[W], " + zn.Name + "Latent heat load[W], ");
sWriter.WriteLine();
//Update the state (Iterate 100 times to make state steady)
for (int i = 0; i < 100; i++)
{
DateTime dTime = new DateTime(2007, 8, 3, 0, 0, 0);
for (int j = 0; j < 24; j++)
{
//Set date and time to Sun and Zone object.
sun.Update(dTime);
mRoom.SetCurrentDateTime(dTime);
//Operate HVAC system (8:00~19:00)
bool operating = (8 <= dTime.Hour && dTime.Hour <= 19);
foreach (Zone zn in zones)
{
zn.ControlHumidityRatio = operating;
zn.ControlDrybulbTemperature = operating;
}
//Set weather state.
outdoor.AirState = new MoistAir(dbt[j], hum[j]);
outdoor.NocturnalRadiation = nrd[j];
sun.SetGlobalHorizontalRadiation(drd[j], dnr[j]);
//Set ventilation air state.
wpZone.VentilationAirState = outdoor.AirState;
//Update boundary state of outdoor facing surfaces.
outdoor.SetWallSurfaceBoundaryState();
//Update the walls.
foreach (Wall wal in walls) wal.Update();
//Update the MultiRoom object.
mRoom.UpdateRoomTemperatures();
mRoom.UpdateRoomHumidities();
//Update date and time
dTime = dTime.AddHours(1);
//If it is last iteration, output result to CSV text.
if (i == 99)
{
foreach (Zone zn in zones)
{
sWriter.Write(zn.CurrentDrybulbTemperature.ToString("F1") + ", " + zn.CurrentHumidityRatio.ToString("F3") + ", " +
zn.CurrentSensibleHeatLoad.ToString("F0") + ", " + zn.CurrentLatentHeatLoad.ToString("F0") + ", ");
}
sWriter.WriteLine();
}
}
}
sWriter.Close();
}
/// <summary>Sample program calculating the heat gain from the air flow window</summary>
private static void airFlowWindowTest()
{
AirFlowWindow afWindow = new AirFlowWindow(new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.TransparentGlass06mm), 0.04,
new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.TransparentGlass06mm), 0.04, 0.8, 1.59, new Incline(Incline.Orientation.S, 0.5 * Math.PI));
Sun sun = new Sun(Sun.City.Tokyo);
afWindow.InteriorSideFilmCoefficient = 15 * 4.186 / 3.6;
afWindow.ExteriorSideFilmCoefficient = 8 * 4.186 / 3.6;
afWindow.Sun = sun;
using (StreamReader sReader = new StreamReader("bnd.csv"))
using (StreamWriter sWriter = new StreamWriter("out.csv"))
{
sun.Update(new DateTime(1985, 11, 21, 0, 30, 0));
afWindow.SetAirFlowVolume(0.22 * 0.032 * 3600 * 0.5, 0.22 * 0.032 * 3600 * 0.5);
afWindow.SetBlind(0.05, 0.45);
for (int i = 0; i < 24; i++)
{
string buff = sReader.ReadLine();
string[] sb = buff.Split(',');
afWindow.OutdoorTemperature = double.Parse(sb[2]);
afWindow.IndoorTemperature = double.Parse(sb[6]);
afWindow.SetInletAirTemperature(afWindow.IndoorTemperature);
afWindow.SetNocturnalRadiation(double.Parse(sb[7]));
sun.SetGlobalHorizontalRadiation(double.Parse(sb[9]), double.Parse(sb[8]));
sWriter.WriteLine(
afWindow.GetExteriorGlassTemperature() + "," + afWindow.GetBlindTemperature() + "," +
afWindow.GetInteriorGlassTemperature() + "," + afWindow.GetHeatRemovalByAirFlow());
sun.Update(sun.CurrentDateTime.AddHours(1));
}
sun.Update(new DateTime(1985, 11, 19, 0, 30, 0));
afWindow.SetAirFlowVolume(0.22 * 0.032 * 3600, 0.22 * 0.032 * 3600);
afWindow.SetBlind(0.05, 0.45);
for (int i = 0; i < 24; i++)
{
string buff = sReader.ReadLine();
string[] sb = buff.Split(',');
afWindow.OutdoorTemperature = double.Parse(sb[2]);
afWindow.IndoorTemperature = double.Parse(sb[6]);
afWindow.SetInletAirTemperature(afWindow.IndoorTemperature);
afWindow.SetNocturnalRadiation(double.Parse(sb[7]));
sun.SetGlobalHorizontalRadiation(double.Parse(sb[9]), double.Parse(sb[8]));
sWriter.WriteLine(
afWindow.GetExteriorGlassTemperature() + "," + afWindow.GetBlindTemperature() + "," +
afWindow.GetInteriorGlassTemperature() + "," + afWindow.GetHeatRemovalByAirFlow());
sun.Update(sun.CurrentDateTime.AddHours(1));
}
sun.Update(new DateTime(1985, 12, 3, 0, 30, 0));
afWindow.SetAirFlowVolume(0.22 * 0.032 * 3600 * 2, 0.22 * 0.032 * 3600 * 2);
afWindow.SetBlind(0.05, 0.45);
for (int i = 0; i < 24; i++)
{
string buff = sReader.ReadLine();
string[] sb = buff.Split(',');
afWindow.OutdoorTemperature = double.Parse(sb[2]);
afWindow.IndoorTemperature = double.Parse(sb[6]);
afWindow.SetInletAirTemperature(afWindow.IndoorTemperature);
afWindow.SetNocturnalRadiation(double.Parse(sb[7]));
sun.SetGlobalHorizontalRadiation(double.Parse(sb[9]), double.Parse(sb[8]));
sWriter.WriteLine(
afWindow.GetExteriorGlassTemperature() + "," + afWindow.GetBlindTemperature() + "," +
afWindow.GetInteriorGlassTemperature() + "," + afWindow.GetHeatRemovalByAirFlow());
sun.Update(sun.CurrentDateTime.AddHours(1));
}
sun.Update(new DateTime(1985, 10, 2, 0, 30, 0));
afWindow.SetAirFlowVolume(0.22 * 0.032 * 3600, 0.22 * 0.032 * 3600);
afWindow.SetBlind(0.027, 0.243);
for (int i = 0; i < 24; i++)
{
string buff = sReader.ReadLine();
string[] sb = buff.Split(',');
afWindow.OutdoorTemperature = double.Parse(sb[2]);
afWindow.IndoorTemperature = double.Parse(sb[6]);
afWindow.SetInletAirTemperature(afWindow.IndoorTemperature);
afWindow.SetNocturnalRadiation(double.Parse(sb[7]));
sun.SetGlobalHorizontalRadiation(double.Parse(sb[9]), double.Parse(sb[8]));
sWriter.WriteLine(
afWindow.GetExteriorGlassTemperature() + "," + afWindow.GetBlindTemperature() + "," +
afWindow.GetInteriorGlassTemperature() + "," + afWindow.GetHeatRemovalByAirFlow());
sun.Update(sun.CurrentDateTime.AddHours(1));
}
}
/*sun.Update(new DateTime(1985, 10, 2, 0, 30, 0));
Incline sinc = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
Console.WriteLine(sun.GetExtraterrestrialRadiation());
Console.WriteLine(sun.Altitude);
for (int i = 0; i < 24; i++)
{
sun.Update(sun.CurrentDateTime.AddHours(1));
//Console.WriteLine(sun.Altitude);
Console.WriteLine(sinc.GetDirectSolarRadiationRate(sun));
}*/
}
/// <summary>Sample program calculating the heat gain from the window</summary>
private static void windowTest()
{
//A sample weather data
//direct normal radiation [W/m2]
double[] wdIdn = new double[] { 0, 0, 0, 0, 0, 244, 517, 679, 774, 829, 856, 862, 847, 809, 739, 619, 415, 97, 0, 0, 0, 0, 0, 0 };
//diffuse horizontal radiation [W/m2]
double[] wdIsky = new double[] { 0, 0, 0, 0, 21, 85, 109, 116, 116, 113, 110, 109, 111, 114, 116, 114, 102, 63, 0, 0, 0, 0, 0, 0 };
//drybulb temperature [C]
double[] wdDbt = new double[] { 27, 27, 27, 27, 27, 28, 29, 30, 31, 32, 32, 33, 33, 33, 34, 33, 32, 32, 31, 30, 29, 29, 28, 28 };
//nocturnal radiation [W/m2]
double[] wdRN = new double[] { 24, 24, 24, 24, 24, 24, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 25, 25, 25, 25, 24, 24, 24 };
//Create a window with a single 3mm transparent glass pane
GlassPanes.Pane pane = new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.TransparentGlass03mm);
GlassPanes glassPane = new GlassPanes(pane);
Window window = new Window(glassPane);
//Set wall surface information
WindowSurface outsideWindowSurface = window.GetSurface(true);
outsideWindowSurface.FilmCoefficient = 23d;
outsideWindowSurface.Albedo = 0.2;
WindowSurface insideWindowSurface = window.GetSurface(false);
insideWindowSurface.FilmCoefficient = 9.3;
//Set incline of an outdoor surface : South, vertical incline
window.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
//There is no sun shade
window.Shade = SunShade.EmptySunShade;
//Initialize sun. Tokyo : 7/21 0:00
Sun sun = new Sun(Sun.City.Tokyo);
DateTime dTime = new DateTime(2001, 7, 21, 0, 0, 0);
sun.Update(dTime);
window.Sun = sun;
//Indoor drybulb temperature is constant (25C)
window.IndoorDrybulbTemperature = 25;
//Result : Title line
Console.WriteLine(" Time |Transmission[W]|Absorption[W]|Transfer[W]|Convective[W]|Radiative[W]");
//execute simulation
for (int i = 0; i < 24; i++)
{
//Set radiations (calculate global horizontal radiation from direct normal and diffuse horizontal radiation)
sun.SetGlobalHorizontalRadiation(wdIsky[i], wdIdn[i]);
//Set nocturnal radiation
window.NocturnalRadiation = wdRN[i];
//Set outdoor temperature
window.OutdoorDrybulbTemperature = wdDbt[i];
//Output result
Console.WriteLine(dTime.ToShortTimeString().PadLeft(5) + " | " + window.TransmissionHeatGain.ToString("F1").PadLeft(13) + " | " +
window.AbsorbedHeatGain.ToString("F1").PadLeft(11) + " | " + window.TransferHeatGain.ToString("F1").PadLeft(9) + " | " +
window.ConvectiveHeatGain.ToString("F1").PadLeft(11) + " | " + window.RadiativeHeatGain.ToString("F1").PadLeft(11));
//Update time
dTime = dTime.AddHours(1);
sun.Update(dTime);
}
Console.Read();
}
/// <summary>Sample program calculating weather state</summary>
private static void weatherTest()
{
//Create an instance of the Sun class. (Location is Tokyo)
Sun sun = new Sun(Sun.City.Tokyo);
//Set date and time information(1983/12/21 12:00)
DateTime dTime = new DateTime(1983, 12, 21, 12, 0, 0);
sun.Update(dTime);
//Create instances of the Incline class. Vertical south east surface and 45 degree west surface.
Incline seInc = new Incline(Incline.Orientation.SE, 0.5 * Math.PI);
Incline wInc = new Incline(Incline.Orientation.W, 0.25 * Math.PI);
//Estimate direct normal and diffuse horizontal radiation from global horizontal radiation (467 W/m2)
sun.EstimateDiffuseAndDirectNormalRadiation(467);
//Calculate insolation rate on the inclined plane.
double cosThetaSE, cosThetaW;
cosThetaSE = seInc.GetDirectSolarRadiationRate(sun);
cosThetaW = wInc.GetDirectSolarRadiationRate(sun);
Console.WriteLine("Location:Tokyo, Date and time:12/21 12:00");
Console.WriteLine("Altitude of sun=" + Sky.RadianToDegree(sun.Altitude).ToString("F1") + " degree");
Console.WriteLine("Orientation of sun=" + Sky.RadianToDegree(sun.Orientation).ToString("F1") + " degree");
Console.WriteLine("Direct normal radiation=" + sun.DirectNormalRadiation.ToString("F1") + " W/m2");
Console.WriteLine("Diffuse horizontal radiation=" + sun.GlobalHorizontalRadiation.ToString("F1") + " W/m2");
Console.WriteLine("Direct normal radiation to SE surface=" + (sun.DirectNormalRadiation * cosThetaSE).ToString("F1") + " W/m2");
Console.WriteLine("Direct normal radiation to W surface=" + (sun.DirectNormalRadiation * cosThetaW).ToString("F1") + " W/m2");
Console.Read();
}
