private int[] intProposedCompressedSize = new int[5]; // An array to hold the compressed size of message for each proposal.
public ProtocolB2(ProtocolInitial Parent, ref TChannelProperties stcNewChannel, ref ArrayList aryMessages)
{
//
// Initialize the keepalive timer used during long file downloads to keep the remote TCP link from timing out
//
// tmrKeepAlive = New Timer
// AddHandler tmrKeepAlive.Elapsed, AddressOf OnKeepAliveTimer
// tmrKeepAlive.AutoReset = False
// tmrKeepAlive.Interval = 120000 ' 2 minutes
// Instantiates a B2 channel protocol handler...
stcChannel = stcNewChannel;
objInitialProtocol = Parent;
StateChange(EB2States.WaitingForNewCommand);
Globals.blnFQSeen = false;
if (!string.IsNullOrEmpty(stcChannel.RemoteCallsign))
{
var strTokens = stcChannel.RemoteCallsign.Split('-');
strBaseConnectedCall = strTokens[0];
}
aryOutboundMessages = aryMessages;
B2OutboundProposal();
} // New
} // Abort
public ModemTelnet(ref TChannelProperties strNewChannel)
{
stcChannel = strNewChannel;
Globals.blnChannelActive = true;
enmState = LinkStates.Initialized;
Globals.queRateDisplay.Enqueue("Internet");
} // New
public bool InitializeSerialPort(ref TChannelProperties stcChannel)
{
// Opens the serial port used to control the radio. Returns true if port opens...
if (stcChannel.RDOControl == "Via PTCII")
{
blnViaPTC = true;
if (stcChannel.TNCType == "PTC II")
{
Globals.ObjScsModem.SendRadioCommand("#TRX TY K " + stcChannel.RDOControlBaud + " A");
}
else if (stcChannel.TTLLevel)
{
Globals.ObjScsModem.SendRadioCommand("#TRX TY K " + stcChannel.RDOControlBaud + " A TTL");
}
else
{
Globals.ObjScsModem.SendRadioCommand("#TRX TY K " + stcChannel.RDOControlBaud + " A V24");
}
Thread.Sleep(200);
return(true);
}
try
{
if (objSerial is object)
{
if (objSerial.IsOpen)
{
objSerial.DiscardInBuffer();
objSerial.DiscardOutBuffer();
objSerial.Close(); // Close the serial port if already open
Thread.Sleep(Globals.intComCloseTime);
}
objSerial.WriteTimeout = 1000;
objSerial.ReceivedBytesThreshold = 1; // Minimum of 1 bytes for interrupt
objSerial.BaudRate = Convert.ToInt32(stcChannel.RDOControlBaud);
objSerial.DataBits = 8;
objSerial.Parity = Parity.None;
objSerial.StopBits = StopBits.Two; // two stop bits for TS-440, 450, 690
objSerial.PortName = stcChannel.RDOControlPort;
objSerial.Handshake = Handshake.None;
objSerial.RtsEnable = true;
objSerial.DtrEnable = true;
objSerial.NewLine = ";";
objSerial.Open();
objSerial.DiscardInBuffer();
objSerial.DiscardOutBuffer();
return(objSerial.IsOpen);
}
}
catch (Exception ex)
{
_log.Error("[RadioKenwood.InitializeSerialPort] " + ex.Message);
return(false);
}
return(default);
} // tmrPollClient_Tick
public void UpdateChannelProperties(ref TChannelProperties Channel)
{
Channel.RemoteCallsign = cmbCallSigns.Text.Trim().ToUpper();
Channel.RDOCenterFrequency = cmbFrequencies.Text.Trim();
// Channels.UpdateChannel(Channel)
Globals.stcEditedSelectedChannel = Channel;
blnChangesNotSaved = false;
} // UpdateProperties
private string strChallengePhrase = ""; // Challenge phrase as received by ;PQ: command
public ProtocolInitial(IModem Parent, ref TChannelProperties strNewChannel)
{
ObjModem = Parent;
stcChannel = strNewChannel;
Globals.strConnectedCallsign = strNewChannel.RemoteCallsign; // Set the global callsign for use by Radar
Globals.strConnectedGridSquare = ""; // and clear the connected Grid square
strSID = "[Paclink-" + Application.ProductVersion + "-" + SSIDTag() + "B2FIHM$]";
ProtocolStateChange(EProtocolStates.Connected);
} // New
public bool InitializeSerialPort(ref TChannelProperties Channel)
{
// Opens the serial port used to control the radio. Returns true if port opens...
if (Channel.RDOControl == "Via PTCII")
{
blnViaPTC = true;
if (Channel.TNCType == "PTC II")
{
Globals.ObjScsModem.SendRadioCommand("#TRX TY Y " + Channel.RDOControlBaud + " A");
}
else if (Channel.TTLLevel)
{
Globals.ObjScsModem.SendRadioCommand("#TRX TY Y " + Channel.RDOControlBaud + " A TTL");
}
else
{
Globals.ObjScsModem.SendRadioCommand("#TRX TY Y " + Channel.RDOControlBaud + " A V24");
}
Thread.Sleep(100);
return(true);
}
try
{
if (objSerial.IsOpen)
{
objSerial.DiscardInBuffer();
objSerial.DiscardOutBuffer();
objSerial.Close();
Thread.Sleep(Globals.intComCloseTime);
}
objSerial.WriteTimeout = 1000;
objSerial.ReceivedBytesThreshold = 1;
objSerial.BaudRate = Convert.ToInt32(Channel.RDOControlBaud);
objSerial.DataBits = 8;
objSerial.Parity = Parity.None;
objSerial.StopBits = StopBits.Two;
objSerial.PortName = Channel.RDOControlPort;
objSerial.Handshake = Handshake.None;
objSerial.RtsEnable = true;
objSerial.DtrEnable = true;
objSerial.NewLine = ";";
objSerial.Open();
objSerial.DiscardInBuffer();
objSerial.DiscardOutBuffer();
OpenRadio(Channel.RDOModel);
return(objSerial.IsOpen);
}
catch (Exception e)
{
_log.Error("[RadioYaesu.InitializeSerialPort] " + e.Message);
return(false);
}
} // InitializeSerialPort
} // RemoveChannel
public static void UpdateChannel(ref TChannelProperties stcChannel)
{
//
// Updates the properties for the channel represented in stcChannel.
//
string strName = stcChannel.ChannelName;
if (IsChannel(strName))
{
UpdateProperties(ref stcChannel);
}
} // UpdateChannel
} // ClearEntries
private void SetEntries()
{
stcSelectedChannel = (TChannelProperties)Channels.Entries[cmbChannelName.Text];
{
var withBlock = stcSelectedChannel;
nudPriority.Value = withBlock.Priority;
chkEnabled.Checked = withBlock.Enabled;
}
btnAdd.Enabled = false;
btnRemove.Enabled = true;
btnUpdate.Enabled = true;
} // SetEntries
} // SetEntries
private void btnAdd_Click(object sender, EventArgs e)
{
cmbChannelName.Text = cmbChannelName.Text.Trim();
cmbChannelName.Text = cmbChannelName.Text.Replace("|", "");
if (!Globals.IsValidFileName(cmbChannelName.Text))
{
cmbChannelName.Focus();
return;
}
if (string.IsNullOrEmpty(cmbChannelName.Text))
{
MessageBox.Show("A channel name is required...", "Error", MessageBoxButtons.OK, MessageBoxIcon.Information);
cmbChannelName.Focus();
return;
}
if (Channels.IsAccount(cmbChannelName.Text))
{
MessageBox.Show(cmbChannelName.Text + " is in use as an account name...", "Error", MessageBoxButtons.OK, MessageBoxIcon.Information);
cmbChannelName.Focus();
return;
}
if (Channels.IsChannel(cmbChannelName.Text))
{
MessageBox.Show("The channel name " + cmbChannelName.Text + " is already in use...", "Error", MessageBoxButtons.OK, MessageBoxIcon.Information);
cmbChannelName.Focus();
}
else
{
var stcNewChannel = new TChannelProperties()
{
ChannelType = ChannelMode.Telnet,
ChannelName = cmbChannelName.Text,
Priority = Convert.ToInt32(nudPriority.Value),
Enabled = chkEnabled.Checked,
EnableAutoforward = true, // Telnet Channels always enabled
RemoteCallsign = "WL2K"
};
Channels.AddChannel(ref stcNewChannel);
Channels.FillChannelCollection();
FillChannelList();
ClearEntries();
Globals.Settings.Save("Properties", "Last Telnet Channel", cmbChannelName.Text);
Close();
}
} // btnAdd_Click
public bool InitializeSerialPort(ref TChannelProperties Channel)
{
// Opens the serial port used to control the radio. Returns true if port opens...
strCIVAddress = Channel.CIVAddress;
bytCIVAddress = byte.Parse(strCIVAddress, System.Globalization.NumberStyles.HexNumber);
if (Channel.RDOControl == "Via PTCII")
{
blnViaPTC = true;
Globals.ObjScsModem.SendRadioCommand("#TRX TY I " + Channel.RDOControlBaud + " $" + Channel.CIVAddress);
Thread.Sleep(200); // Changed to 200 by W4PHS
return(true);
}
try
{
if (objSerial.IsOpen)
{
objSerial.DiscardInBuffer();
objSerial.DiscardOutBuffer();
objSerial.Close(); // Close the serial port if it is already open
Thread.Sleep(Globals.intComCloseTime);
}
objSerial.WriteTimeout = 1000;
objSerial.ReceivedBytesThreshold = 1;
objSerial.BaudRate = Convert.ToInt32(Channel.RDOControlBaud);
objSerial.DataBits = 8;
objSerial.Parity = Parity.None;
objSerial.StopBits = StopBits.One;
objSerial.PortName = Channel.RDOControlPort;
objSerial.Handshake = Handshake.None;
objSerial.RtsEnable = true;
objSerial.DtrEnable = true;
objSerial.Open();
objSerial.DiscardInBuffer();
objSerial.DiscardOutBuffer();
return(objSerial.IsOpen);
}
catch (Exception ex)
{
_log.Error("[RadioIcom.InitializeSerialPort] " + ex.Message);
return(false);
}
} // InitializeSerialPort
} // InitializeSerialPort
public bool SetParameters(ref TChannelProperties Channel)
{
bool SetParametersRet = default;
// Function to set parameters for frequency and filters, possibly other parameters later...
strRadioModel = Channel.RDOModel;
SetParametersRet = true;
if (Channel.ChannelType == ChannelMode.PacketTNC)
{
SetParametersRet = SetVHFFrequency(Globals.ExtractFreq(ref Channel.RDOCenterFrequency), Channel.CIVAddress, Channel.RDOModel);
}
else
{
SetHFFrequency(Globals.ExtractFreq(ref Channel.RDOCenterFrequency), Channel.AudioToneCenter, Channel.CIVAddress, Channel.RDOModel, Channel.NarrowFilter);
}
return(SetParametersRet);
} // SetParameters
} // FillChannelCollection
public static void AddChannel(ref TChannelProperties stcChannel)
{
//
// Adds the channel properties of a new channel to the registry.
//
string strName = stcChannel.ChannelName;
if (!string.IsNullOrEmpty(strName))
{
if (!IsChannel(strName))
{
string strChannelNames = Globals.Settings.Get("Properties", "Channel Names", "");
strChannelNames = strChannelNames + strName + "|";
Globals.Settings.Save("Properties", "Channel Names", strChannelNames);
}
UpdateProperties(ref stcChannel);
}
} // SaveChannel
} // SetEntries
private void UpdateChannelProperties(ref TChannelProperties stcChannel)
{
stcChannel.ChannelType = ChannelMode.PacketTNC;
stcChannel.ChannelName = cmbChannelName.Text;
stcChannel.Priority = Convert.ToInt32(nudPriority.Value);
stcChannel.RemoteCallsign = CleanupCallSign(cmbRemoteCallsign.Text);
stcChannel.RDOCenterFrequency = cmbFreqs.Text;
stcChannel.Enabled = chkEnabled.Checked;
stcChannel.TNCTimeout = Convert.ToInt32(nudActivityTimeout.Value);
stcChannel.TNCScript = txtScript.Text;
stcChannel.TNCScriptTimeout = Convert.ToInt32(nudScriptTimeout.Value);
stcChannel.TNCSerialPort = cmbTNCSerialPort.Text;
stcChannel.TNCBaudRate = cmbTNCBaudRate.Text;
stcChannel.TNCConfigurationFile = txtTNCConfigurationFile.Text;
stcChannel.TNCConfigureOnFirstUseOnly = chkFirstUseOnly.Checked;
stcChannel.TNCPort = Convert.ToInt32(nudTNCPort.Value);
stcChannel.TNCType = cmbTNCType.Text;
stcChannel.TNCOnAirBaud = Convert.ToInt32(cmbOnAirBaud.Text);
stcChannel.EnableAutoforward = true; // Packet Channels always enabled
if (!rdoManual.Checked)
{
stcChannel.RDOCenterFrequency = (1000 * double.Parse(txtFreqMHz.Text, System.Globalization.NumberStyles.AllowDecimalPoint)).ToString("##00000.0");
}
stcChannel.RDOControlBaud = cmbRadioBaud.Text;
stcChannel.RDOControlPort = cmbRadioPort.Text;
stcChannel.RDOModel = cmbRadioModel.Text;
stcChannel.CIVAddress = txtRadioAdd.Text.Trim().ToUpper();
if (rdoViaPTCII.Checked)
{
stcChannel.RDOControl = "Via PTCII";
}
else if (rdoSerial.Checked)
{
stcChannel.RDOControl = "Serial";
}
else
{
stcChannel.RDOControl = "Manual";
}
stcChannel.TTLLevel = rdoTTL.Checked;
} // UpdateProperties
public DialogPactorConnect(IModem objSender, ref TChannelProperties Channel)
{
// This call is required by the Windows Form Designer...
_objModem = objSender;
stcChannel = Channel;
blnLoading = true;
InitializeComponent();
_cmbCallSigns.Name = "cmbCallSigns";
_cmbFrequencies.Name = "cmbFrequencies";
_Label1.Name = "Label1";
_Label2.Name = "Label2";
_lblUSB.Name = "lblUSB";
_lblBusy.Name = "lblBusy";
_Label4.Name = "Label4";
_btnConnect.Name = "btnConnect";
_btnCancel.Name = "btnCancel";
_btnHelp.Name = "btnHelp";
_lblPMBOType.Name = "lblPMBOType";
_chkResumeDialog.Name = "chkResumeDialog";
} // New
} // ClearEntries
private void SetEntries()
{
stcSelectedChannel = (TChannelProperties)Channels.Entries[cmbChannelName.Text];
{
var withBlock = stcSelectedChannel;
nudPriority.Value = withBlock.Priority;
cmbAGWPort.Text = withBlock.AGWPort;
txtRemoteCallsign.Text = withBlock.RemoteCallsign;
nudActivityTimeout.Value = withBlock.AGWTimeout;
nudPacketLength.Value = withBlock.AGWPacketLength;
nudMaxOutstanding.Value = Math.Max(1, withBlock.AGWMaxFrames); // temp fix to fix channels with old values of 0
nudScriptTimeout.Value = withBlock.AGWScriptTimeout;
txtScript.Text = withBlock.AGWScript;
chkEnabled.Checked = withBlock.Enabled;
}
btnAdd.Enabled = false;
btnRemove.Enabled = true;
btnUpdate.Enabled = true;
} // SetEntries
public bool SetParameters(ref TChannelProperties stcTNC)
{
bool SetParametersRet = default;
// Function to set parameters for frequency and filters, possibly other parameters later...
SetParametersRet = true;
try
{
string strKilohertz = Globals.StripMode(stcTNC.RDOCenterFrequency); // Strip off any mode designator
int intHertz = Globals.KHzToHz(strKilohertz) - Convert.ToInt32(stcTNC.AudioToneCenter);
if (!SetFrequency(intHertz))
{
SetParametersRet = false;
}
}
catch
{
SetParametersRet = false;
}
return(SetParametersRet);
} // SetParameters
public bool SetParameters(ref TChannelProperties Channel)
{
// Function to set parameters for frequency and filters, possibly other parameters later...
try
{
if (Channel.ChannelType == ChannelMode.PacketTNC)
{
SetVHFFrequency(Globals.ExtractFreq(ref Channel.RDOCenterFrequency), Channel.RDOModel);
}
else
{
SetHFFrequency(Globals.ExtractFreq(ref Channel.RDOCenterFrequency), Channel.AudioToneCenter, Channel.RDOModel);
SetFilter(Channel.NarrowFilter, Globals.ExtractFreq(ref Channel.RDOCenterFrequency), Channel.RDOModel, Channel.AudioToneCenter);
}
return(true);
}
catch (Exception e)
{
_log.Error("[RadioYaesu.SetParameters] " + e.Message);
return(false);
}
} // SetParameters
} // UpdateChannel
private static void UpdateProperties(ref TChannelProperties stcChannel)
{
//
// Updates the registry as required for the properties carried in strChannel.
//
string strName = stcChannel.ChannelName;
Globals.Settings.Save(strName, "Channel Type", stcChannel.ChannelType.ToString());
Globals.Settings.Save(strName, "Channel Name", stcChannel.ChannelName);
Globals.Settings.Save(strName, "Priority", stcChannel.Priority);
Globals.Settings.Save(strName, "Remote Callsign", stcChannel.RemoteCallsign);
// objPropertiesFile.WriteInteger(strName, "Frequencies Scanned", .FrequenciesScanned)
Globals.Settings.Save(strName, "Enabled", stcChannel.Enabled);
if (stcChannel.ChannelType == ChannelMode.Telnet)
{
// Telnet only properties...
Globals.Settings.Save(strName, "Enable Autoforward", stcChannel.EnableAutoforward);
}
// objPropertiesFile.WriteString(strName, "LocalIP Address Index", .LocalIPAddressIndex.ToString)
else if (stcChannel.ChannelType == ChannelMode.PacketAGW)
{
// Packet AGW only properties...
Globals.Settings.Save(strName, "AGW Port", stcChannel.AGWPort);
Globals.Settings.Save(strName, "AGW Timeout", stcChannel.AGWTimeout);
Globals.Settings.Save(strName, "AGW Packet Length", stcChannel.AGWPacketLength);
Globals.Settings.Save(strName, "AGW Max Frames", stcChannel.AGWMaxFrames);
Globals.Settings.Save(strName, "AGW Script Timeout", stcChannel.AGWScriptTimeout);
Globals.Settings.Save(strName, "AGW Allow Inbound", stcChannel.AGWAllowInbound);
Globals.Settings.Save(strName, "Enable Autoforward", stcChannel.EnableAutoforward);
SaveScript(strName, stcChannel.AGWScript);
}
else if (stcChannel.ChannelType == ChannelMode.PacketTNC)
{
// Packet TNC only properties...
Globals.Settings.Save(strName, "TNC Type", stcChannel.TNCType);
Globals.Settings.Save(strName, "TNC Port", stcChannel.TNCPort);
Globals.Settings.Save(strName, "TNC Timeout", stcChannel.TNCTimeout);
Globals.Settings.Save(strName, "TNC Serial Port", stcChannel.TNCSerialPort);
Globals.Settings.Save(strName, "TNC Baud Rate", stcChannel.TNCBaudRate);
Globals.Settings.Save(strName, "TNC Configuration File", stcChannel.TNCConfigurationFile);
Globals.Settings.Save(strName, "TNC Configuration On First Use Only", stcChannel.TNCConfigureOnFirstUseOnly);
Globals.Settings.Save(strName, "TNC Script Timeout", stcChannel.TNCScriptTimeout);
// objPropertiesFile.WriteBoolean(strName, "TNC Allow Inbound", .TNCAllowInbound)
Globals.Settings.Save(strName, "Enable Autoforward", stcChannel.EnableAutoforward);
Globals.Settings.Save(strName, "Radio Control", stcChannel.RDOControl);
Globals.Settings.Save(strName, "Radio Control Port", stcChannel.RDOControlPort);
Globals.Settings.Save(strName, "Radio Control Baud", stcChannel.RDOControlBaud);
Globals.Settings.Save(strName, "Radio Model", stcChannel.RDOModel);
Globals.Settings.Save(strName, "Center Frequency", stcChannel.RDOCenterFrequency);
Globals.Settings.Save(strName, "Audio Tone Center", stcChannel.AudioToneCenter);
Globals.Settings.Save(strName, "CIV Address", stcChannel.CIVAddress);
Globals.Settings.Save(strName, "PTC II TTL Level", stcChannel.TTLLevel);
Globals.Settings.Save(strName, "Use NMEA Commands", stcChannel.NMEA);
Globals.Settings.Save(strName, "TNC On-Air Baud", stcChannel.TNCOnAirBaud);
SaveScript(strName, stcChannel.TNCScript);
}
else if (stcChannel.ChannelType == ChannelMode.PactorTNC)
{
// Pactor TNC only properties...
Globals.Settings.Save(strName, "TNC Type", stcChannel.TNCType);
Globals.Settings.Save(strName, "TNC Port", stcChannel.TNCPort);
Globals.Settings.Save(strName, "TNC Timeout", stcChannel.TNCTimeout);
Globals.Settings.Save(strName, "TNC Serial Port", stcChannel.TNCSerialPort);
Globals.Settings.Save(strName, "TNC Baud Rate", stcChannel.TNCBaudRate);
Globals.Settings.Save(strName, "TNC Configuration File", stcChannel.TNCConfigurationFile);
Globals.Settings.Save(strName, "TNC Configuration On First Use Only", stcChannel.TNCConfigureOnFirstUseOnly);
Globals.Settings.Save(strName, "TNC Busy Hold", stcChannel.TNCBusyHold);
Globals.Settings.Save(strName, "Enable Autoforward", stcChannel.EnableAutoforward);
Globals.Settings.Save(strName, "Radio Control", stcChannel.RDOControl);
Globals.Settings.Save(strName, "Radio Control Port", stcChannel.RDOControlPort);
Globals.Settings.Save(strName, "Radio Control Baud", stcChannel.RDOControlBaud);
Globals.Settings.Save(strName, "Radio Model", stcChannel.RDOModel);
Globals.Settings.Save(strName, "Center Frequency", stcChannel.RDOCenterFrequency);
Globals.Settings.Save(strName, "Audio Tone Center", stcChannel.AudioToneCenter);
Globals.Settings.Save(strName, "CIV Address", stcChannel.CIVAddress);
Globals.Settings.Save(strName, "Narrow Filter", stcChannel.NarrowFilter);
Globals.Settings.Save(strName, "TNC PSK Level", stcChannel.TNCPSKLevel);
Globals.Settings.Save(strName, "TNC FSK Level", stcChannel.TNCFSKLevel);
Globals.Settings.Save(strName, "Pactor 1 ID", stcChannel.PactorId);
Globals.Settings.Save(strName, "PTC II TTL Level", stcChannel.TTLLevel);
Globals.Settings.Save(strName, "Use NMEA Commands", stcChannel.NMEA);
}
else if (stcChannel.ChannelType == ChannelMode.Winmor)
{
Globals.Settings.Save(strName, "TNC Busy Hold", stcChannel.TNCBusyHold);
Globals.Settings.Save(strName, "Enable Autoforward", stcChannel.EnableAutoforward);
Globals.Settings.Save(strName, "Radio Control", stcChannel.RDOControl);
Globals.Settings.Save(strName, "Radio Control Port", stcChannel.RDOControlPort);
Globals.Settings.Save(strName, "Radio Control Baud", stcChannel.RDOControlBaud);
Globals.Settings.Save(strName, "Radio Model", stcChannel.RDOModel);
Globals.Settings.Save(strName, "Center Frequency", stcChannel.RDOCenterFrequency);
Globals.Settings.Save(strName, "Audio Tone Center", stcChannel.AudioToneCenter);
Globals.Settings.Save(strName, "CIV Address", stcChannel.CIVAddress);
Globals.Settings.Save(strName, "Narrow Filter", stcChannel.NarrowFilter);
Globals.Settings.Save(strName, "Use NMEA Commands", stcChannel.NMEA);
Globals.Settings.Save(strName, "WINMOR BW", stcChannel.WMBandwidth);
Globals.Settings.Save(strName, "WM CaptureDevice", stcChannel.WMCaptureDevice);
Globals.Settings.Save(strName, "WM PlaybackDevice", stcChannel.WMPlaybackDevice);
Globals.Settings.Save(strName, "WM PTT Control", stcChannel.WMPTTControl);
Globals.Settings.Save(strName, "WM Serial Ctrl Signals", stcChannel.WMSerialCtrlSignals);
Globals.Settings.Save(strName, "WM Xmit Level", stcChannel.WMXmitLevel);
Globals.Settings.Save(strName, "WM CW ID", stcChannel.WMcwID);
Globals.Settings.Save(strName, "WM DebugLog", stcChannel.WMDebugLog);
}
} // UpdateProperties
} // ClearEntries
private void SetEntries()
{
stcSelectedChannel = (TChannelProperties)Channels.Entries[cmbChannelName.Text];
// chkFirstUseOnly.Enabled = False
chkFirstUseOnly.Checked = true;
{
var withBlock = stcSelectedChannel;
nudPriority.Value = withBlock.Priority;
nudActivityTimeout.Value = withBlock.TNCTimeout;
chkChannelEnabled.Checked = withBlock.Enabled;
if (Globals.IsAutoforwardEnabled())
{
chkAutoforwardEnabled.Checked = withBlock.EnableAutoforward;
}
else
{
chkAutoforwardEnabled.Checked = false;
}
if (stcSelectedChannel.TNCType.StartsWith("PTC"))
{
chkBusyHold.Visible = true;
}
else
{
chkBusyHold.Visible = false;
chkBusyHold.Checked = false;
}
cmbTNCSerialPort.Text = withBlock.TNCSerialPort;
cmbTNCBaudRate.Text = withBlock.TNCBaudRate;
cmbTNCType.Text = withBlock.TNCType;
// If (cmbTNCType.Text = "PK-232") Or (cmbTNCType.Text = "PK-900") Then txtAudioCenter.Enabled = False
if (cmbTNCType.Text == "PK-232" | cmbTNCType.Text == "DSP-232")
{
txtAudioCenter.Enabled = false;
}
txtTNCConfigurationFile.Text = withBlock.TNCConfigurationFile;
chkFirstUseOnly.Checked = withBlock.TNCConfigureOnFirstUseOnly;
txtAudioCenter.Text = withBlock.AudioToneCenter;
cmbRadioModel.Text = withBlock.RDOModel;
txtRadioAddress.Text = withBlock.CIVAddress;
chkNarrowFilter.Checked = withBlock.NarrowFilter;
cmbRadioBaud.Text = withBlock.RDOControlBaud;
cmbRadioPort.Text = withBlock.RDOControlPort;
rdoManual.Checked = withBlock.RDOControl == "Manual";
rdoSerial.Checked = withBlock.RDOControl == "Serial";
rdoViaPTCII.Checked = withBlock.RDOControl == "Via PTCII";
nudFSKLevel.Value = withBlock.TNCFSKLevel;
nudPSKLevel.Value = withBlock.TNCPSKLevel;
chkIDEnabled.Checked = withBlock.PactorId;
chkBusyHold.Checked = withBlock.TNCBusyHold;
rdoTTL.Checked = withBlock.TTLLevel;
rdoV24.Checked = !withBlock.TTLLevel;
chkNMEA.Checked = withBlock.NMEA;
if (cmbRadioModel.Text.IndexOf("Icom") != -1)
{
chkNMEA.Enabled = true;
lblRadioAddress.Enabled = true;
txtRadioAddress.Enabled = true;
}
else
{
chkNMEA.Enabled = false;
chkNMEA.Checked = false;
lblRadioAddress.Enabled = false;
txtRadioAddress.Enabled = false;
txtRadioAddress.Text = "";
}
// Remote Call signs...
cmbCallSigns.Text = withBlock.RemoteCallsign;
// Frequencies...
cmbFreqs.Text = withBlock.RDOCenterFrequency;
cmbTNCBaudRate.Items.Clear();
if (cmbTNCType.Text.StartsWith("PTC II") | cmbTNCType.Text == "PTC DR-7800")
{
cmbTNCBaudRate.Items.Add("38400");
cmbTNCBaudRate.Items.Add("57600");
cmbTNCBaudRate.Items.Add("115200");
if (Convert.ToInt32(withBlock.TNCBaudRate) < 38400)
{
withBlock.TNCBaudRate = "38400";
}
}
else
{
cmbTNCBaudRate.Items.Add("4800");
cmbTNCBaudRate.Items.Add("9600");
cmbTNCBaudRate.Items.Add("19200");
cmbTNCBaudRate.Items.Add("38400");
cmbTNCBaudRate.Items.Add("57600");
cmbTNCBaudRate.Items.Add("115200");
}
cmbTNCBaudRate.Text = withBlock.TNCBaudRate;
btnAdd.Enabled = false;
btnRemove.Enabled = true;
btnUpdate.Enabled = true;
cmbFreqs.Enabled = true;
cmbCallSigns.Enabled = true;
}
} // SetEntries
} // SetEntries
private void UpdateChannelProperties(ref TChannelProperties stcChannel)
{
stcChannel.ChannelType = ChannelMode.PactorTNC; // TODO: Needs error checking for some parameters
stcChannel.ChannelName = cmbChannelName.Text;
stcChannel.Priority = Convert.ToInt32(nudPriority.Value);
stcChannel.Enabled = chkChannelEnabled.Checked;
stcChannel.TNCTimeout = Convert.ToInt32(nudActivityTimeout.Value);
stcChannel.TNCSerialPort = cmbTNCSerialPort.Text;
stcChannel.TNCBaudRate = cmbTNCBaudRate.Text;
stcChannel.TNCConfigurationFile = txtTNCConfigurationFile.Text;
stcChannel.TNCConfigureOnFirstUseOnly = chkFirstUseOnly.Checked;
stcChannel.TNCType = cmbTNCType.Text;
var switchExpr = cmbTNCType.Text;
switch (switchExpr)
{
case "KAM/+":
case "KAMXL":
{
stcChannel.TNCPort = 2;
break;
}
case "KAM98":
case "PK-232": // , "PK-900"
{
stcChannel.TNCPort = 1; // TODO: needs verification, not sure of correct port for XL and 98
break;
}
case "PTC II":
case "PTC IIe":
case "PTC IIex":
case "PTC IIpro":
case "PTC IIusb":
case "PTC DR-7800":
{
stcChannel.TNCPort = 31; // port 31 for SCS Pactor
break;
}
}
stcChannel.EnableAutoforward = chkAutoforwardEnabled.Checked;
stcChannel.AudioToneCenter = txtAudioCenter.Text.Trim();
stcChannel.RDOControlBaud = cmbRadioBaud.Text;
stcChannel.RDOControlPort = cmbRadioPort.Text;
stcChannel.RDOModel = cmbRadioModel.Text;
stcChannel.CIVAddress = txtRadioAddress.Text.Trim().ToUpper();
stcChannel.NarrowFilter = chkNarrowFilter.Checked;
if (rdoViaPTCII.Checked)
{
stcChannel.RDOControl = "Via PTCII";
}
else if (rdoSerial.Checked)
{
stcChannel.RDOControl = "Serial";
}
else
{
stcChannel.RDOControl = "Manual";
}
stcChannel.TNCFSKLevel = Convert.ToInt32(nudFSKLevel.Value);
stcChannel.TNCPSKLevel = Convert.ToInt32(nudPSKLevel.Value);
stcChannel.TNCBusyHold = chkBusyHold.Checked;
stcChannel.PactorId = chkIDEnabled.Checked;
stcChannel.RemoteCallsign = GetCallSign();
// .FrequenciesScanned = cmbFreqs.Items.Count
stcChannel.RDOCenterFrequency = cmbFreqs.Text;
stcChannel.TTLLevel = rdoTTL.Checked;
stcChannel.NMEA = chkNMEA.Checked;
} // UpdateProperties
// **********************************************************************************************************
// Open serial port and establish communications with the radio. Do initial radio setup.
//
// Return true on success of false on failure
// **********************************************************************************************************
public bool InitializeSerialPort(ref TChannelProperties stcTNC)
{
int retc;
try
{
if (MICOMOpenPort(ref stcTNC.RDOControlPort, Convert.ToInt32(stcTNC.RDOControlBaud)) != 0) // Com port open worked
{
// *****************************************************************
// * Perform initial radio setup.
// 1 set the radio into frequency mode vs channel mode
// 2 check to make sure it is in USB mode and report an error if not
// 3 turn off clarifier to prevent hard to find problems
// *****************************************************************
// Put the radio into frequency mode...
byte argMode = 2;
retc = MICOMSetMode(ref argMode);
if (retc == 0) // had a problem with the command
{
if (Timer2Popped == true)
{
_log.Error("[RadioMicom.InitializeSerialPort] " + "Radio response timeout. Check radio power and connection");
}
else
{
_log.Error("[RadioMicom.InitializeSerialPort] " + "MICOM Set MOde Command failed");
}
return(false);
}
else
{
retc = MICOMRptSSBState();
if (retc != 2)
{
MessageBox.Show("Radio must be in USB mode...", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
_log.Error("[RadioMicom.InitializeSerialPort] " + "MICOM not in USB mode");
return(false);
}
else
{
byte argClarifierState = 0;
retc = MICOMSetClarifier(ref argClarifierState);
if (retc == 0)
{
_log.Error("[RadioMicom.InitializeSerialPort] " + "Set Clarifier off failed");
return(false);
}
else
{
return(true);
}
}
}
}
else
{
_log.Error("[RadioMicom.InitializeSerialPort] " + "Serial port open failed: " + stcTNC.RDOControlPort);
return(false);
}
}
catch (Exception e)
{
_log.Error("[RadioMicom.InitializeSerialPort] " + e.Message);
return(false);
}
} // InitializeSerialPort
} // ClearEntries
private void SetEntries()
{
stcSelectedChannel = (TChannelProperties)Channels.Entries[cmbChannelName.Text];
{
var withBlock = stcSelectedChannel;
string strPhsFreq = withBlock.RDOCenterFrequency;
cmbFreqs.Text = withBlock.RDOCenterFrequency;
nudPriority.Value = withBlock.Priority;
// cmbRemoteCallsign.Text = .RemoteCallsign
nudActivityTimeout.Value = Math.Max(10, withBlock.TNCTimeout);
nudScriptTimeout.Value = withBlock.TNCScriptTimeout;
txtScript.Text = withBlock.TNCScript;
chkEnabled.Checked = withBlock.Enabled;
cmbTNCSerialPort.Text = withBlock.TNCSerialPort;
cmbTNCType.Text = withBlock.TNCType;
nudTNCPort.Value = withBlock.TNCPort;
txtTNCConfigurationFile.Text = withBlock.TNCConfigurationFile;
chkFirstUseOnly.Checked = withBlock.TNCConfigureOnFirstUseOnly;
// Radio Type
cmbRadioBaud.Text = stcSelectedChannel.RDOControlBaud;
cmbRadioPort.Text = stcSelectedChannel.RDOControlPort;
cmbRadioModel.Text = stcSelectedChannel.RDOModel;
cmbOnAirBaud.Text = stcSelectedChannel.TNCOnAirBaud.ToString();
txtRadioAdd.Text = stcSelectedChannel.CIVAddress;
rdoSerial.Checked = stcSelectedChannel.RDOControl == "Serial";
rdoViaPTCII.Checked = stcSelectedChannel.RDOControl == "Via PTCII";
rdoManual.Checked = stcSelectedChannel.RDOControl == "Manual";
rdoTTL.Checked = stcSelectedChannel.TTLLevel;
rdoV24.Checked = !stcSelectedChannel.TTLLevel;
try
{
txtFreqMHz.Text = (0.001 * double.Parse(stcSelectedChannel.RDOCenterFrequency, System.Globalization.NumberStyles.AllowDecimalPoint)).ToString("##00.000");
}
catch
{
}
cmbTNCBaudRate.Items.Clear();
if (cmbTNCType.Text.StartsWith("PTC II") | cmbTNCType.Text.IndexOf("DR-7800") != -1)
{
cmbTNCBaudRate.Items.Add("38400");
cmbTNCBaudRate.Items.Add("57600");
cmbTNCBaudRate.Items.Add("115200");
if (Convert.ToInt32(withBlock.TNCBaudRate) < 38400)
withBlock.TNCBaudRate = "38400";
}
else
{
cmbTNCBaudRate.Items.Add("4800");
cmbTNCBaudRate.Items.Add("9600");
cmbTNCBaudRate.Items.Add("19200");
cmbTNCBaudRate.Items.Add("38400");
cmbTNCBaudRate.Items.Add("57600");
cmbTNCBaudRate.Items.Add("115200");
}
cmbTNCBaudRate.Text = withBlock.TNCBaudRate;
}
btnAdd.Enabled = false;
btnRemove.Enabled = true;
btnUpdate.Enabled = true;
cmbFreqs.Enabled = true;
} // SetEntries
