/// <summary>Runs repeating charges for the date passed in, usually today. Can't use 'out' variables because this runs over Middle Tier.</summary>
public static RepeatChargeResult RunRepeatingCharges(DateTime dateRun)
{
if (RemotingClient.RemotingRole == RemotingRole.ClientWeb)
{
return(Meth.GetObject <RepeatChargeResult>(MethodBase.GetCurrentMethod(), dateRun));
}
Prefs.UpdateDateT(PrefName.RepeatingChargesBeginDateTime, dateRun);
try {
RepeatChargeResult result = new RepeatChargeResult();
List <RepeatCharge> listRepeatingCharges = RepeatCharges.Refresh(0).ToList();
if (PrefC.IsODHQ)
{
//Remove all eService repeating charges.
//EService charges have already been calculated and stored in EServiceBilling table. Add those here.
List <string> listEServiceCodes = EServiceCodeLink.GetProcCodesForAll();
listRepeatingCharges.RemoveAll(x => listEServiceCodes.Contains(x.ProcCode));
result.ProceduresAddedCount += EServiceBillings.AddEServiceRepeatingChargesHelper(dateRun).Count;
}
DateTime startedUsingFKs = UpdateHistories.GetDateForVersion(new Version("16.1.0.0")); //We started using FKs from procs to repeat charges in 16.1.
foreach (RepeatCharge repeatCharge in listRepeatingCharges)
{
if (!repeatCharge.IsEnabled || (repeatCharge.DateStop.Year > 1880 && repeatCharge.DateStop.AddMonths(3) < dateRun))
{
continue; //This repeating charge is too old to possibly create a new charge. Not precise but greatly reduces calls to DB.
//We will filter by more stringently on the DateStop later on.
}
long codeNum = ProcedureCodes.GetCodeNum(repeatCharge.ProcCode);
//Must contain all procedures that affect the date range.
DateTime procRangeStart = repeatCharge.DateStart.AddMonths(-1); //Minus 1 month to catch accounts that have changed their billing date
List <Procedure> listExistingProcs = Procedures.GetCompletedForDateRange(procRangeStart, dateRun,
new List <long> {
codeNum
},
new List <long> {
repeatCharge.PatNum
});
for (int j = listExistingProcs.Count - 1; j >= 0; j--) //iterate backwards to remove elements
{
Procedure proc = listExistingProcs[j];
if (((proc.RepeatChargeNum == repeatCharge.RepeatChargeNum) //Check the procedure's FK first
//Use the old logic without matching FKs only if the procedure was added before updating to 16.1
//Match patnum, codenum, fee, year, and month (IsRepeatDateHelper uses special logic to determine correct month)
//Procedures with the ProcDate prior to the RepeatCharge.StartDate should not be considered as valid procedures
//associated to the current repeat charge.
|| ((proc.ProcDate < startedUsingFKs || startedUsingFKs.Year < 1880) &&
proc.PatNum == repeatCharge.PatNum &&
proc.CodeNum == codeNum &&
proc.ProcFee.IsEqual(repeatCharge.ChargeAmt))) &&
(proc.ProcDate >= repeatCharge.DateStart || //Consider procedures that fall on or after the repeat charge start date.
proc.ProcDate.Day != repeatCharge.DateStart.Day)) //Consider procs only when days are not the same. Catches procs that have changed their billing date
{
continue; //This existing procedure needs to be counted for this repeat charge.
}
listExistingProcs.RemoveAt(j); //Removing so that another repeat charge of the same code, date, and amount will be added.
}
List <DateTime> listBillingDates; //This list will have 1 or 2 dates where a repeating charge might be added
if (PrefC.GetBool(PrefName.BillingUseBillingCycleDay))
{
listBillingDates = GetBillingDatesHelper(repeatCharge.DateStart, repeatCharge.DateStop, dateRun, listExistingProcs, repeatCharge,
Patients.GetPat(repeatCharge.PatNum).BillingCycleDay);
}
else
{
listBillingDates = GetBillingDatesHelper(repeatCharge.DateStart, repeatCharge.DateStop, dateRun, listExistingProcs, repeatCharge);
}
listBillingDates.RemoveAll(x => x.Date > DateTime.Today.Date && !PrefC.GetBool(PrefName.FutureTransDatesAllowed));
//If any billing dates have not been filtered out, add a repeating charge on those dates
foreach (DateTime billingDate in listBillingDates)
{
Procedure procAdded = AddRepeatingChargeHelper(repeatCharge, billingDate, dateRun);
List <Claim> listClaimsAdded = new List <Claim>();
if (repeatCharge.CreatesClaim && !ProcedureCodes.GetProcCode(repeatCharge.ProcCode).NoBillIns)
{
listClaimsAdded = AddClaimsHelper(repeatCharge, procAdded);
}
result.ProceduresAddedCount++;
result.ClaimsAddedCount += listClaimsAdded.Count;
}
}
return(result);
}
finally {
Prefs.UpdateString(PrefName.RepeatingChargesBeginDateTime, "");
}
}
/// <summary>Runs repeating charges for the date passed in, usually today. Can't use 'out' variables because this runs over Middle Tier.</summary>
public static RepeatChargeResult RunRepeatingCharges(DateTime dateRun)
{
if (RemotingClient.RemotingRole == RemotingRole.ClientWeb)
{
return(Meth.GetObject <RepeatChargeResult>(MethodBase.GetCurrentMethod(), dateRun));
}
Prefs.UpdateDateT(PrefName.RepeatingChargesBeginDateTime, dateRun);
try {
RepeatChargeResult result = new RepeatChargeResult();
List <RepeatCharge> listRepeatingCharges = RepeatCharges.Refresh(0).ToList();
if (PrefC.IsODHQ)
{
//Remove all eService repeating charges.
//EService charges have already been calculated and stored in EServiceBilling table. Add those here.
List <string> listEServiceCodes = EServiceCodeLink.GetProcCodesForAll();
listRepeatingCharges.RemoveAll(x => listEServiceCodes.Contains(x.ProcCode));
result.ProceduresAddedCount += EServiceBillings.AddEServiceRepeatingChargesHelper(dateRun).Count;
}
//Must contain all procedures that affect the date range, safe to contain too many, bad to contain too few.
List <Procedure> listExistingProcs = Procedures.GetCompletedForDateRange(dateRun.AddMonths(-3), dateRun.AddDays(1),
listRepeatingCharges.Select(x => x.ProcCode).Distinct().Select(x => ProcedureCodes.GetProcCode(x).CodeNum).ToList());
DateTime startedUsingFKs = UpdateHistories.GetDateForVersion(new Version("16.1.0.0")); //We started using FKs from procs to repeat charges in 16.1.
foreach (RepeatCharge repeatCharge in listRepeatingCharges)
{
if (!repeatCharge.IsEnabled || (repeatCharge.DateStop.Year > 1880 && repeatCharge.DateStop.AddMonths(3) < dateRun))
{
continue; //This repeating charge is too old to possibly create a new charge. Not precise but greatly reduces calls to DB.
//We will filter by more stringently on the DateStop later on.
}
Patient pat = null;
List <DateTime> listBillingDates; //This list will have 1 or 2 dates where a repeating charge might be added
if (PrefC.GetBool(PrefName.BillingUseBillingCycleDay))
{
pat = Patients.GetPat(repeatCharge.PatNum);
listBillingDates = GetBillingDatesHelper(repeatCharge.DateStart, repeatCharge.DateStop, dateRun, pat.BillingCycleDay);
}
else
{
listBillingDates = GetBillingDatesHelper(repeatCharge.DateStart, repeatCharge.DateStop, dateRun);
}
long codeNum = ProcedureCodes.GetCodeNum(repeatCharge.ProcCode);
//Remove billing dates if there is a procedure from this repeat charge in that month and year
for (int i = listBillingDates.Count - 1; i >= 0; i--) //iterate backwards to remove elements
{
DateTime billingDate = listBillingDates[i];
for (int j = listExistingProcs.Count - 1; j >= 0; j--) //iterate backwards to remove elements
{
Procedure proc = listExistingProcs[j];
if ((proc.RepeatChargeNum == repeatCharge.RepeatChargeNum && //Check the procedure's FK first
IsRepeatDateHelper(repeatCharge, billingDate, proc.ProcDate, pat))
//Use the old logic without matching FKs only if the procedure was added before updating to 16.1
//Match patnum, codenum, fee, year, and month (IsRepeatDateHelper uses special logic to determine correct month)
|| ((proc.ProcDate < startedUsingFKs || startedUsingFKs.Year < 1880) &&
proc.PatNum == repeatCharge.PatNum &&
proc.CodeNum == codeNum &&
IsRepeatDateHelper(repeatCharge, billingDate, proc.ProcDate, pat) &&
proc.ProcFee.IsEqual(repeatCharge.ChargeAmt)))
{
//This is a match to an existing procedure.
listBillingDates.RemoveAt(i); //Removing so that a procedure will not get added on this date.
listExistingProcs.RemoveAt(j); //Removing so that another repeat charge of the same code, date, and amount will be added.
break; //Go to the next billing date
}
}
}
//If any billing dates have not been filtered out, add a repeating charge on those dates
foreach (DateTime billingDate in listBillingDates)
{
Procedure procAdded = AddRepeatingChargeHelper(repeatCharge, billingDate, dateRun);
List <Claim> listClaimsAdded = new List <Claim>();
if (repeatCharge.CreatesClaim && !ProcedureCodes.GetProcCode(repeatCharge.ProcCode).NoBillIns)
{
listClaimsAdded = AddClaimsHelper(repeatCharge, procAdded);
}
result.ProceduresAddedCount++;
result.ClaimsAddedCount += listClaimsAdded.Count;
}
}
return(result);
}
finally {
Prefs.UpdateString(PrefName.RepeatingChargesBeginDateTime, "");
}
}