/// <summary>
/// GetCredentialCreateOptions method implementation (RequestNewCredential)
/// </summary>
/// <returns>CredentialCreateOptions including a challenge to be sent to the browser/authr to create new credentials</returns>
/// <param name="attestationPreference">This member is intended for use by Relying Parties that wish to express their preference for attestation conveyance. The default is none.</param>
/// <param name="excludeCredentials">Recommended. This member is intended for use by Relying Parties that wish to limit the creation of multiple credentials for the same account on a single authenticator.The client is requested to return an error if the new credential would be created on an authenticator that also contains one of the credentials enumerated in this parameter.</param>
public CredentialCreateOptions GetRegisterCredentialOptions(Fido2User user, List <PublicKeyCredentialDescriptor> excludeCredentials, AuthenticatorSelection authenticatorSelection, AttestationConveyancePreference attestationPreference, AuthenticationExtensionsClientInputs extensions = null)
{
var challenge = new byte[_config.ChallengeSize];
_crypto.GetBytes(challenge);
var options = CredentialCreateOptions.Create(_config, challenge, user, authenticatorSelection, attestationPreference, excludeCredentials, extensions);
return(options);
}
public async Task <AttestationVerificationSuccess> VerifyAsync(CredentialCreateOptions originalOptions, Fido2Configuration config, IsCredentialIdUniqueToUserAsyncDelegate isCredentialIdUniqueToUser, IMetadataService metadataService, byte[] requestTokenBindingId)
{
// https://www.w3.org/TR/webauthn/#registering-a-new-credential
// 1. Let JSONtext be the result of running UTF-8 decode on the value of response.clientDataJSON.
// 2. Let C, the client data claimed as collected during the credential creation, be the result of running an implementation-specific JSON parser on JSONtext.
// Note: C may be any implementation-specific data structure representation, as long as C’s components are referenceable, as required by this algorithm.
// Above handled in base class constructor
// 3. Verify that the value of C.type is webauthn.create
if (Type != "webauthn.create")
{
throw new VerificationException("AttestationResponse is not type webauthn.create");
}
// 4. Verify that the value of C.challenge matches the challenge that was sent to the authenticator in the create() call.
// 5. Verify that the value of C.origin matches the Relying Party's origin.
// 6. Verify that the value of C.tokenBinding.status matches the state of Token Binding for the TLS connection over which the assertion was obtained.
// If Token Binding was used on that TLS connection, also verify that C.tokenBinding.id matches the base64url encoding of the Token Binding ID for the connection.
BaseVerify(config.Origin, originalOptions.Challenge, requestTokenBindingId);
if (Raw.Id == null || Raw.Id.Length == 0)
{
throw new VerificationException("AttestationResponse is missing Id");
}
if (Raw.Type != PublicKeyCredentialType.PublicKey)
{
throw new VerificationException("AttestationResponse is missing type with value 'public-key'");
}
var authData = new AuthenticatorData(AttestationObject.AuthData);
// 7. Compute the hash of response.clientDataJSON using SHA-256.
byte[] clientDataHash, rpIdHash;
using (var sha = CryptoUtils.GetHasher(HashAlgorithmName.SHA256))
{
clientDataHash = sha.ComputeHash(Raw.Response.ClientDataJson);
rpIdHash = sha.ComputeHash(Encoding.UTF8.GetBytes(originalOptions.Rp.Id));
}
// 8. Perform CBOR decoding on the attestationObject field of the AuthenticatorAttestationResponse structure to obtain the attestation statement format fmt, the authenticator data authData, and the attestation statement attStmt.
// Handled in AuthenticatorAttestationResponse::Parse()
// 9. Verify that the rpIdHash in authData is the SHA-256 hash of the RP ID expected by the Relying Party
if (false == authData.RpIdHash.SequenceEqual(rpIdHash))
{
throw new VerificationException("Hash mismatch RPID");
}
// 10. Verify that the User Present bit of the flags in authData is set.
if (false == authData.UserPresent)
{
throw new VerificationException("User Present flag not set in authenticator data");
}
// 11. If user verification is required for this registration, verify that the User Verified bit of the flags in authData is set.
// see authData.UserVerified
// TODO: Make this a configurable option and add check to require
// 12. Verify that the values of the client extension outputs in clientExtensionResults and the authenticator extension outputs in the extensions in authData are as expected,
// considering the client extension input values that were given as the extensions option in the create() call. In particular, any extension identifier values
// in the clientExtensionResults and the extensions in authData MUST be also be present as extension identifier values in the extensions member of options, i.e.,
// no extensions are present that were not requested. In the general case, the meaning of "are as expected" is specific to the Relying Party and which extensions are in use.
// TODO?: Implement sort of like this: ClientExtensions.Keys.Any(x => options.extensions.contains(x);
if (false == authData.HasAttestedCredentialData)
{
throw new VerificationException("Attestation flag not set on attestation data");
}
// 13. Determine the attestation statement format by performing a USASCII case-sensitive match on fmt against the set of supported WebAuthn Attestation Statement Format Identifier values.
// An up-to-date list of registered WebAuthn Attestation Statement Format Identifier values is maintained in the IANA registry of the same name
// https://www.w3.org/TR/webauthn/#defined-attestation-formats
AttestationVerifier verifier = default;
switch (AttestationObject.Fmt)
{
case "none":
verifier = new None(); // https://www.w3.org/TR/webauthn/#none-attestation
break;
case "tpm":
verifier = new Tpm(); // https://www.w3.org/TR/webauthn/#tpm-attestation
break;
case "android-key":
verifier = new AndroidKey(); // https://www.w3.org/TR/webauthn/#android-key-attestation
break;
case "android-safetynet":
verifier = new AndroidSafetyNet(metadataService.TimestampDriftTolerance); // https://www.w3.org/TR/webauthn/#android-safetynet-attestation
break;
case "fido-u2f":
verifier = new FidoU2f(); // https://www.w3.org/TR/webauthn/#fido-u2f-attestation
break;
case "packed":
verifier = new Packed(); // https://www.w3.org/TR/webauthn/#packed-attestation
break;
case "apple":
verifier = new Apple(); // https://www.w3.org/TR/webauthn/#apple-anonymous-attestation
break;
default:
throw new VerificationException("Missing or unknown attestation type");
}
;
// 14. Verify that attStmt is a correct attestation statement, conveying a valid attestation signature,
// by using the attestation statement format fmt’s verification procedure given attStmt, authData and the hash of the serialized client data computed in step 7
(var attType, var trustPath) = verifier.Verify(AttestationObject.AttStmt, AttestationObject.AuthData, clientDataHash);
// 15. If validation is successful, obtain a list of acceptable trust anchors (attestation root certificates or ECDAA-Issuer public keys) for that attestation type and attestation statement format fmt, from a trusted source or from policy.
// For example, the FIDO Metadata Service [FIDOMetadataService] provides one way to obtain such information, using the aaguid in the attestedCredentialData in authData.
var entry = metadataService?.GetEntry(authData.AttestedCredentialData.AaGuid);
// while conformance testing, we must reject any authenticator that we cannot get metadata for
if (metadataService?.ConformanceTesting() == true && null == entry && AttestationType.None != attType && "fido-u2f" != AttestationObject.Fmt)
{
throw new VerificationException("AAGUID not found in MDS test metadata");
}
if (null != trustPath)
{
// If the authenticator is listed as in the metadata as one that should produce a basic full attestation, build and verify the chain
if ((entry?.MetadataStatement?.AttestationTypes.Contains(MetadataAttestationType.ATTESTATION_BASIC_FULL.ToEnumMemberValue()) ?? false) ||
(entry?.MetadataStatement?.AttestationTypes.Contains(MetadataAttestationType.ATTESTATION_PRIVACY_CA.ToEnumMemberValue()) ?? false))
{
var attestationRootCertificates = entry.MetadataStatement.AttestationRootCertificates
.Select(x => new X509Certificate2(Convert.FromBase64String(x)))
.ToArray();
if (false == CryptoUtils.ValidateTrustChain(trustPath, attestationRootCertificates))
{
throw new VerificationException("Invalid certificate chain");
}
}
// If the authenticator is not listed as one that should produce a basic full attestation, the certificate should be self signed
if ((!entry?.MetadataStatement?.AttestationTypes.Contains(MetadataAttestationType.ATTESTATION_BASIC_FULL.ToEnumMemberValue()) ?? false) &&
(!entry?.MetadataStatement?.AttestationTypes.Contains(MetadataAttestationType.ATTESTATION_PRIVACY_CA.ToEnumMemberValue()) ?? false) &&
(!entry?.MetadataStatement?.AttestationTypes.Contains(MetadataAttestationType.ATTESTATION_ANONCA.ToEnumMemberValue()) ?? false))
{
if (trustPath.FirstOrDefault().Subject != trustPath.FirstOrDefault().Issuer)
{
throw new VerificationException("Attestation with full attestation from authenticator that does not support full attestation");
}
}
}
// Check status resports for authenticator with undesirable status
foreach (var report in entry?.StatusReports ?? Enumerable.Empty <StatusReport>())
{
if (true == Enum.IsDefined(typeof(UndesiredAuthenticatorStatus), (UndesiredAuthenticatorStatus)report.Status))
{
throw new VerificationException("Authenticator found with undesirable status");
}
}
// 16. Assess the attestation trustworthiness using the outputs of the verification procedure in step 14, as follows:
// If self attestation was used, check if self attestation is acceptable under Relying Party policy.
// If ECDAA was used, verify that the identifier of the ECDAA-Issuer public key used is included in the set of acceptable trust anchors obtained in step 15.
// Otherwise, use the X.509 certificates returned by the verification procedure to verify that the attestation public key correctly chains up to an acceptable root certificate.
// 17. Check that the credentialId is not yet registered to any other user.
// If registration is requested for a credential that is already registered to a different user, the Relying Party SHOULD fail this registration ceremony, or it MAY decide to accept the registration, e.g. while deleting the older registration
if (false == await isCredentialIdUniqueToUser(new IsCredentialIdUniqueToUserParams(authData.AttestedCredentialData.CredentialID, originalOptions.User)))
{
throw new VerificationException("CredentialId is not unique to this user");
}
// 18. If the attestation statement attStmt verified successfully and is found to be trustworthy, then register the new credential with the account that was denoted in the options.user passed to create(),
// by associating it with the credentialId and credentialPublicKey in the attestedCredentialData in authData, as appropriate for the Relying Party's system.
var result = new AttestationVerificationSuccess()
{
CredentialId = authData.AttestedCredentialData.CredentialID,
PublicKey = authData.AttestedCredentialData.CredentialPublicKey.GetBytes(),
User = originalOptions.User,
Counter = authData.SignCount,
CredType = AttestationObject.Fmt,
Aaguid = authData.AttestedCredentialData.AaGuid,
};
return(result);
// 19. If the attestation statement attStmt successfully verified but is not trustworthy per step 16 above, the Relying Party SHOULD fail the registration ceremony.
// This implementation throws if the outputs are not trustworthy for a particular attestation type.
}
/// <summary>
/// SetRegisterCredentialResult method implementation
/// </summary>
private int SetRegisterCredentialResult(AuthenticationContext ctx, string jsonResponse, out string error)
{
bool isDeserialized = false;
try
{
string jsonOptions = ctx.CredentialOptions;
if (string.IsNullOrEmpty(jsonOptions))
{
throw new ArgumentNullException(jsonOptions);
}
if (string.IsNullOrEmpty(jsonResponse))
{
throw new ArgumentNullException(jsonResponse);
}
MFAWebAuthNUser user = RuntimeRepository.GetUser(Config, ctx.UPN);
if (user != null)
{
CredentialCreateOptions options = CredentialCreateOptions.FromJson(jsonOptions);
#pragma warning disable CS1998 // Cette méthode async n'a pas d'opérateur 'await' et elle s'exécutera de façon synchrone
IsCredentialIdUniqueToUserAsyncDelegate callback = async(args) =>
#pragma warning restore CS1998 // Cette méthode async n'a pas d'opérateur 'await' et elle s'exécutera de façon synchrone
{
var users = RuntimeRepository.GetUsersByCredentialId(Config, user, args.CredentialId);
if (users.Count > 0)
{
return(false);
}
return(true);
};
AuthenticatorAttestationRawResponse attestationResponse = JsonConvert.DeserializeObject <AuthenticatorAttestationRawResponse>(jsonResponse);
isDeserialized = true;
CredentialMakeResult success = _webathn.SetRegisterCredentialResult(attestationResponse, options, callback).Result;
RuntimeRepository.AddUserCredential(Config, user, new MFAUserCredential
{
Descriptor = new MFAPublicKeyCredentialDescriptor(success.Result.CredentialId),
PublicKey = success.Result.PublicKey,
UserHandle = success.Result.User.Id,
SignatureCounter = success.Result.Counter,
CredType = success.Result.CredType,
RegDate = DateTime.Now,
AaGuid = success.Result.Aaguid,
NickName = ctx.NickName
});
error = string.Empty;
return((int)AuthenticationResponseKind.Biometrics);
}
else
{
Log.WriteEntry(string.Format("{0}\r\n{1}", ctx.UPN, "User does not exists !"), System.Diagnostics.EventLogEntryType.Error, 5000);
error = string.Format("{0}\r\n{1}", ctx.UPN, "User does not exists !");
return((int)AuthenticationResponseKind.Error);
}
}
catch (Exception e)
{
if (isDeserialized)
{
Log.WriteEntry(string.Format("{0}\r\n{1}", ctx.UPN, e.Message), EventLogEntryType.Error, 5000);
}
else
{
Log.WriteEntry(string.Format("{0}\r\n{1}", ctx.UPN, jsonResponse), EventLogEntryType.Error, 5000);
}
error = e.Message;
return((int)AuthenticationResponseKind.Error);
}
}
/// <summary>
/// GetRegisterCredentialOptions method implementation
/// </summary>
private string GetRegisterCredentialOptions(AuthenticationContext ctx)
{
try
{
if (string.IsNullOrEmpty(ctx.UPN))
{
throw new ArgumentNullException(ctx.UPN);
}
string attType = this.ConveyancePreference; // none, direct, indirect
string authType = this.Attachement; // <empty>, platform, cross-platform
UserVerificationRequirement userVerification = this.UserVerificationRequirement; // preferred, required, discouraged
bool requireResidentKey = this.RequireResidentKey; // true,false
MFAWebAuthNUser user = RuntimeRepository.GetUser(Config, ctx.UPN);
if (user != null)
{
List <MFAPublicKeyCredentialDescriptor> existingKeys = RuntimeRepository.GetCredentialsByUser(Config, user).Select(c => c.Descriptor).ToList();
// 3. Create options
AuthenticatorSelection authenticatorSelection = new AuthenticatorSelection
{
RequireResidentKey = requireResidentKey,
UserVerification = userVerification
};
if (!string.IsNullOrEmpty(authType))
{
authenticatorSelection.AuthenticatorAttachment = authType.ToEnum <AuthenticatorAttachment>();
}
AuthenticationExtensionsClientInputs exts = new AuthenticationExtensionsClientInputs()
{
Extensions = this.Extentions,
UserVerificationMethod = this.UserVerificationMethod
};
CredentialCreateOptions options = null;
if (existingKeys.Count > 0)
{
options = _webathn.GetRegisterCredentialOptions(user.ToCore(), existingKeys.ToCore(), authenticatorSelection, attType.ToEnum <AttestationConveyancePreference>(), exts);
}
else
{
options = _webathn.GetRegisterCredentialOptions(user.ToCore(), null, authenticatorSelection, attType.ToEnum <AttestationConveyancePreference>(), exts);
}
string result = options.ToJson();
ctx.CredentialOptions = result;
return(result);
}
else
{
Log.WriteEntry(string.Format("{0}\r\n{1}", ctx.UPN, "User does not exists !"), EventLogEntryType.Error, 5000);
string result = (new CredentialMakeResult {
Status = "error", ErrorMessage = string.Format("{0}", "User does not exists !")
}).ToJson();
ctx.CredentialOptions = result;
return(result);
}
}
catch (Exception e)
{
Log.WriteEntry(string.Format("{0}\r\n{1}", ctx.UPN, e.Message), System.Diagnostics.EventLogEntryType.Error, 5000);
string result = (new CredentialMakeResult {
Status = "error", ErrorMessage = string.Format("{0}{1}", e.Message, e.InnerException != null ? " (" + e.InnerException.Message + ")" : "")
}).ToJson();
ctx.CredentialOptions = result;
return(result);
}
}
/// <summary>
/// Verifies the response from the browser/authr after creating new credentials (MakeNewCredentialAsync)
/// </summary>
/// <param name="attestationResponse"></param>
/// <param name="origChallenge"></param>
/// <returns></returns>
public async Task <CredentialMakeResult> SetRegisterCredentialResult(AuthenticatorAttestationRawResponse attestationResponse, CredentialCreateOptions origChallenge, IsCredentialIdUniqueToUserAsyncDelegate isCredentialIdUniqueToUser, byte[] requestTokenBindingId = null)
{
var parsedResponse = AuthenticatorAttestationResponse.Parse(attestationResponse);
var success = await parsedResponse.VerifyAsync(origChallenge, _config, isCredentialIdUniqueToUser, _metadataService, requestTokenBindingId);
try
{
return(new CredentialMakeResult
{
Status = "ok",
ErrorMessage = string.Empty,
Result = success
});
}
catch (Exception e)
{
return(new CredentialMakeResult
{
Status = "error",
ErrorMessage = e.Message,
Result = success
});
}
}