/// <summary>
/// 创建加工体
/// </summary>
/// <param name="workpieceName"></param>
/// <param name="bodys"></param>
public static void CreateFeatureGeometry(string workpieceName, params Body[] bodys)
{
Part workPart = Session.GetSession().Parts.Work;
NXOpen.CAM.OrientGeometry orientGeometry1 = (NXOpen.CAM.OrientGeometry)workPart.CAMSetup.CAMGroupCollection.FindObject("MCS_MILL");
if (orientGeometry1 == null)
{
throw new Exception("无法找刀到 MCS_MILL");
}
NXOpen.CAM.NCGroup nCGroup1;
nCGroup1 = workPart.CAMSetup.CAMGroupCollection.CreateGeometry(orientGeometry1, "mill_planar", "WORKPIECE", NXOpen.CAM.NCGroupCollection.UseDefaultName.True, workpieceName);
NXOpen.CAM.FeatureGeometry featureGeometry1 = (NXOpen.CAM.FeatureGeometry)nCGroup1;
NXOpen.CAM.MillGeomBuilder millGeomBuilder1;
millGeomBuilder1 = workPart.CAMSetup.CAMGroupCollection.CreateMillGeomBuilder(featureGeometry1);
NXOpen.CAM.GeometrySetList geometrySetList1;
geometrySetList1 = millGeomBuilder1.PartGeometry.GeometryList;
NXOpen.TaggedObject taggedObject1;
taggedObject1 = geometrySetList1.FindItem(0);
NXOpen.CAM.GeometrySet geometrySet1 = (NXOpen.CAM.GeometrySet)taggedObject1;
NXOpen.BodyDumbRule bodyDumbRule1;
bodyDumbRule1 = workPart.ScRuleFactory.CreateRuleBodyDumb(bodys, true);
NXOpen.ScCollector scCollector1;
scCollector1 = geometrySet1.ScCollector;
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
rules1[0] = bodyDumbRule1;
scCollector1.ReplaceRules(rules1, false);
millGeomBuilder1.BlankGeometry.BlankDefinitionType = NXOpen.CAM.GeometryGroup.BlankDefinitionTypes.AutoBlock;
try
{
NXOpen.NXObject nXObject2;
nXObject2 = millGeomBuilder1.Commit();
}
catch (NXException ex)
{
throw ex;;
}
finally
{
millGeomBuilder1.Destroy();
}
}
/// <summary>
/// 沿面的法向投影曲线
/// </summary>
/// <param name="features"></param>
/// <param name="curves"></param>
/// <param name="faces_to_project_to"></param>
/// <returns></returns>
public static ProjectCurve CreateProjectCurve(this FeatureCollection features, IBaseCurve[] curves, Face[] faces_to_project_to)
{
NXOpen.Features.ProjectCurveBuilder projectCurveBuilder = features.CreateProjectCurveBuilder(null);
projectCurveBuilder.CurveFitData.Tolerance = 0.01;
projectCurveBuilder.CurveFitData.AngleTolerance = 0.5;
projectCurveBuilder.ProjectionDirectionMethod = NXOpen.Features.ProjectCurveBuilder.DirectionType.AlongFaceNormal;
projectCurveBuilder.SectionToProject.DistanceTolerance = 0.01;
projectCurveBuilder.SectionToProject.ChainingTolerance = 0.0094999999999999998;
projectCurveBuilder.SectionToProject.AngleTolerance = 0.5;
projectCurveBuilder.SectionToProject.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.CurvesAndPoints);
#if NX12
NXOpen.CurveDumbRule curveDumbRule = (WorkPart as BasePart).ScRuleFactory.CreateRuleBaseCurveDumb(curves);
#else
NXOpen.CurveDumbRule curveDumbRule = WorkPart.ScRuleFactory.CreateRuleBaseCurveDumb(curves);
#endif
projectCurveBuilder.SectionToProject.AllowSelfIntersection(true);
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1] {
curveDumbRule
};
projectCurveBuilder.SectionToProject.AddToSection(rules1, null, null, null, new Point3d(), NXOpen.Section.Mode.Create, false);
NXOpen.ScCollector scCollector1 = WorkPart.ScCollectors.CreateCollector();
#if NX12
NXOpen.FaceDumbRule faceDumbRule = (WorkPart as BasePart).ScRuleFactory.CreateRuleFaceDumb(faces_to_project_to);
#else
NXOpen.FaceDumbRule faceDumbRule = WorkPart.ScRuleFactory.CreateRuleFaceDumb(faces_to_project_to);
#endif
NXOpen.SelectionIntentRule[] rules2 = new NXOpen.SelectionIntentRule[1] {
faceDumbRule
};
scCollector1.ReplaceRules(rules2, false);
bool added1 = projectCurveBuilder.FaceToProjectTo.Add(scCollector1);
ProjectCurve nXObject1 = (ProjectCurve)projectCurveBuilder.Commit();
projectCurveBuilder.SectionToProject.CleanMappingData();
projectCurveBuilder.Destroy();
return(nXObject1);
}
/// <summary>
/// 投影点
/// </summary>
/// <param name="features"></param>
/// <param name="point_to_project">要投影的点</param>
/// <param name="originPoint">投影平面原点</param>
/// <param name="normal">投影平面方向</param>
public static ProjectCurve CreateProjectCurve(this FeatureCollection features, Point point_to_project, Point3d originPoint, Vector3d normal)
{
NXOpen.Features.ProjectCurveBuilder projectCurveBuilder = features.CreateProjectCurveBuilder(null);
projectCurveBuilder.CurveFitData.Tolerance = 0.025399999999999999;
projectCurveBuilder.CurveFitData.AngleTolerance = 0.5;
projectCurveBuilder.ProjectionDirectionMethod = NXOpen.Features.ProjectCurveBuilder.DirectionType.AlongFaceNormal;
projectCurveBuilder.AngleToProjectionVector.RightHandSide = "0";
Plane plane_to_project_to = WorkPart.Planes.CreatePlane(originPoint, normal, NXOpen.SmartObject.UpdateOption.WithinModeling);
plane_to_project_to.SetMethod(NXOpen.PlaneTypes.MethodType.Distance);
plane_to_project_to.SetFlip(false);
plane_to_project_to.SetReverseSide(false);
plane_to_project_to.SetAlternate(NXOpen.PlaneTypes.AlternateType.One);
plane_to_project_to.Evaluate();
projectCurveBuilder.SectionToProject.DistanceTolerance = 0.025399999999999999;
projectCurveBuilder.SectionToProject.ChainingTolerance = 0.024129999999999999;
projectCurveBuilder.SectionToProject.AngleTolerance = 0.5;
projectCurveBuilder.PlaneToProjectTo = plane_to_project_to;
projectCurveBuilder.SectionToProject.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.CurvesAndPoints);
#if NX12
NXOpen.CurveDumbRule curveDumbRule = (WorkPart as BasePart).ScRuleFactory.CreateRuleCurveDumbFromPoints(new Point[] { point_to_project });
#else
NXOpen.CurveDumbRule curveDumbRule = WorkPart.ScRuleFactory.CreateRuleCurveDumbFromPoints(new Point[] { point_to_project });
#endif
projectCurveBuilder.SectionToProject.AllowSelfIntersection(true);
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1] {
curveDumbRule
};
projectCurveBuilder.SectionToProject.AddToSection(rules1, null, null, null, new Point3d(), NXOpen.Section.Mode.Create, false);
ProjectCurve projectCurve = (ProjectCurve)projectCurveBuilder.Commit();
projectCurveBuilder.SectionToProject.CleanMappingData();
projectCurveBuilder.Destroy();
return(projectCurve);
}
public static NXObject CreatePullFace(Vector3d vec, double pull, params Face[] faces)
{
Session theSession = Session.GetSession();
Part workPart = theSession.Parts.Work;
NXOpen.Features.PullFace nullNXOpen_Features_PullFace = null;
NXOpen.Features.PullFaceBuilder pullFaceBuilder1;
pullFaceBuilder1 = workPart.Features.CreatePullFaceBuilder(nullNXOpen_Features_PullFace);
pullFaceBuilder1.Motion.DistanceAngle.OrientXpress.AxisOption = NXOpen.GeometricUtilities.OrientXpressBuilder.Axis.Passive;
pullFaceBuilder1.Motion.DistanceAngle.OrientXpress.PlaneOption = NXOpen.GeometricUtilities.OrientXpressBuilder.Plane.Passive;
pullFaceBuilder1.Motion.AlongCurveAngle.AlongCurve.IsPercentUsed = true;
NXOpen.Point3d origin1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Direction direction1;
direction1 = workPart.Directions.CreateDirection(origin1, vec, NXOpen.SmartObject.UpdateOption.WithinModeling);
pullFaceBuilder1.Motion.DistanceVector = direction1;
NXOpen.FaceDumbRule faceDumbRule;
faceDumbRule = workPart.ScRuleFactory.CreateRuleFaceDumb(faces);
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
rules1[0] = faceDumbRule;
pullFaceBuilder1.FaceToPull.ReplaceRules(rules1, false);
pullFaceBuilder1.Motion.DistanceValue.RightHandSide = pull.ToString();
try
{
NXOpen.NXObject nXObject1;
nXObject1 = pullFaceBuilder1.Commit();
return(nXObject1);
}
catch (Exception ex)
{
LogMgr.WriteLog("PullFaceUtils:CreatePullFace: " + ex.Message);
return(null);
}
finally
{
pullFaceBuilder1.Destroy();
}
}
/// <summary>
///偏置面
/// </summary>
/// <param name="side"></param>
/// <param name="isok"></param>
/// <param name="faces"></param>
/// <returns></returns>
public static NXObject Offset(double side, out bool isok, params Face[] faces)
{
isok = true;
Session theSession = Session.GetSession();
Part workPart = theSession.Parts.Work;
Session.UndoMarkId mark = theSession.SetUndoMark(Session.MarkVisibility.Visible, "Offset");
NXOpen.Features.AdmOffsetRegion nullNXOpen_Features_AdmOffsetRegion = null;
NXOpen.Features.AdmOffsetRegionBuilder admOffsetRegionBuilder1;
admOffsetRegionBuilder1 = workPart.Features.CreateAdmOffsetRegionBuilder(nullNXOpen_Features_AdmOffsetRegion);
NXOpen.FaceDumbRule faceDumbRule;
faceDumbRule = workPart.ScRuleFactory.CreateRuleFaceDumb(faces);
NXOpen.SelectionIntentRule[] rules = new NXOpen.SelectionIntentRule[1];
rules[0] = faceDumbRule;
admOffsetRegionBuilder1.FaceToOffset.FaceCollector.ReplaceRules(rules, false);
admOffsetRegionBuilder1.Distance.Value = side;
NXOpen.NXObject nXObject1 = null;
try
{
nXObject1 = admOffsetRegionBuilder1.Commit();
return(nXObject1);
}
catch (NXException ex)
{
isok = false;
LogMgr.WriteLog("OffsetRegion:Offset:" + ex.Message);
return(null);
}
finally
{
admOffsetRegionBuilder1.Destroy();
if (!isok)
{
theSession.UndoToMark(mark, "Offset");
}
theSession.DeleteUndoMark(mark, "Offset");
}
}
/// <summary>
/// 设置加工体
/// </summary>
/// <param name="workpiece"></param>
/// <param name="bodys"></param>
public static void SetFeatureGeometry(string workpiece, params Body[] bodys)
{
Part workPart = Session.GetSession().Parts.Work;
NXOpen.CAM.FeatureGeometry featureGeometry1 = (NXOpen.CAM.FeatureGeometry)workPart.CAMSetup.CAMGroupCollection.FindObject(workpiece);
if (featureGeometry1 == null)
{
throw new Exception("无法找到" + workpiece + "加工体");
}
NXOpen.CAM.MillGeomBuilder millGeomBuilder1;
millGeomBuilder1 = workPart.CAMSetup.CAMGroupCollection.CreateMillGeomBuilder(featureGeometry1);
NXOpen.CAM.GeometrySetList geometrySetList1;
geometrySetList1 = millGeomBuilder1.PartGeometry.GeometryList;
NXOpen.TaggedObject taggedObject1;
taggedObject1 = geometrySetList1.FindItem(0);
NXOpen.CAM.GeometrySet geometrySet1 = (NXOpen.CAM.GeometrySet)taggedObject1;
NXOpen.BodyDumbRule bodyDumbRule1;
bodyDumbRule1 = workPart.ScRuleFactory.CreateRuleBodyDumb(bodys, true);
NXOpen.ScCollector scCollector1;
scCollector1 = geometrySet1.ScCollector;
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
rules1[0] = bodyDumbRule1;
scCollector1.ReplaceRules(rules1, false);
try
{
NXOpen.NXObject nXObject1;
nXObject1 = millGeomBuilder1.Commit();
}
catch (NXException ex)
{
throw ex;;
}
finally
{
millGeomBuilder1.Destroy();
}
}
public static void Main(string[] args)
{
Console.WriteLine("Starting NX Golden Cantilever Journal");
//Declare Part Variables
//Convert Strings to doubles from the args
double heightA = System.Convert.ToDouble(args[0]);
double length = System.Convert.ToDouble(args[1]);
double thickness = System.Convert.ToDouble(args[2]);
//Declare part name for the part file and the IGES file
string part_name = args[3];
string part_name_prt = part_name + ".prt";
string part_name_igs = part_name + ".igs";
//Measurements need to be converted from m to mm
//length = 1000 * length;
//thickness = 1000 * thickness;
//heightA = 1000 * heightA;
double heightB = 1.618 * heightA;
//Convert necessary values back to strings because I already
//converted them to doubles and I'm too lazy to go back and change
//this since it works.
string length_string = System.Convert.ToString(length);
string thickness_string = System.Convert.ToString(thickness);
string heightA_string = System.Convert.ToString(heightA);
string heightB_string = System.Convert.ToString(heightB);
NXOpen.Session theSession = NXOpen.Session.GetSession();
// ----------------------------------------------
// Menu: File->New...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId1;
markId1 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
NXOpen.FileNew fileNew1;
fileNew1 = theSession.Parts.FileNew();
theSession.SetUndoMarkName(markId1, "New Dialog");
NXOpen.Session.UndoMarkId markId2;
markId2 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "New");
theSession.DeleteUndoMark(markId2, null);
NXOpen.Session.UndoMarkId markId3;
markId3 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "New");
fileNew1.TemplateFileName = "model-plain-1-mm-template.prt";
fileNew1.UseBlankTemplate = false;
fileNew1.ApplicationName = "ModelTemplate";
fileNew1.Units = NXOpen.Part.Units.Millimeters;
fileNew1.RelationType = "";
fileNew1.UsesMasterModel = "No";
fileNew1.TemplateType = NXOpen.FileNewTemplateType.Item;
fileNew1.TemplatePresentationName = "Model";
fileNew1.ItemType = "";
fileNew1.Specialization = "";
fileNew1.SetCanCreateAltrep(false);
fileNew1.NewFileName = part_name_prt;
fileNew1.MasterFileName = "";
fileNew1.MakeDisplayedPart = true;
NXOpen.NXObject nXObject1;
nXObject1 = fileNew1.Commit();
NXOpen.Part workPart = theSession.Parts.Work;
NXOpen.Part displayPart = theSession.Parts.Display;
theSession.DeleteUndoMark(markId3, null);
fileNew1.Destroy();
theSession.ApplicationSwitchImmediate("UG_APP_MODELING");
NXOpen.Session.UndoMarkId markId4;
markId4 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Enter Gateway");
NXOpen.Session.UndoMarkId markId5;
markId5 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Enter Modeling");
// ----------------------------------------------
// Menu: Insert->Sketch...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId6;
markId6 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
NXOpen.Sketch nullNXOpen_Sketch = null;
NXOpen.SketchInPlaceBuilder sketchInPlaceBuilder1;
sketchInPlaceBuilder1 = workPart.Sketches.CreateNewSketchInPlaceBuilder(nullNXOpen_Sketch);
NXOpen.Unit unit1 = (NXOpen.Unit)workPart.UnitCollection.FindObject("MilliMeter");
NXOpen.Expression expression1;
expression1 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.Expression expression2;
expression2 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.SketchAlongPathBuilder sketchAlongPathBuilder1;
sketchAlongPathBuilder1 = workPart.Sketches.CreateSketchAlongPathBuilder(nullNXOpen_Sketch);
sketchAlongPathBuilder1.PlaneLocation.Expression.RightHandSide = "0";
theSession.SetUndoMarkName(markId6, "Create Sketch Dialog");
NXOpen.DatumPlane datumPlane1 = (NXOpen.DatumPlane)workPart.Datums.FindObject("DATUM_CSYS(0) YZ plane");
NXOpen.Point3d point1 = new NXOpen.Point3d(11.1863449593062, 6.4875984180345, 0.0);
sketchInPlaceBuilder1.PlaneOrFace.SetValue(datumPlane1, workPart.ModelingViews.WorkView, point1);
NXOpen.Features.DatumCsys datumCsys1 = (NXOpen.Features.DatumCsys)workPart.Features.FindObject("DATUM_CSYS(0)");
NXOpen.Point point2 = (NXOpen.Point)datumCsys1.FindObject("POINT 1");
sketchInPlaceBuilder1.SketchOrigin = point2;
sketchInPlaceBuilder1.PlaneOrFace.Value = null;
sketchInPlaceBuilder1.PlaneOrFace.Value = datumPlane1;
NXOpen.DatumAxis datumAxis1 = (NXOpen.DatumAxis)workPart.Datums.FindObject("DATUM_CSYS(0) X axis");
sketchInPlaceBuilder1.Axis.Value = datumAxis1;
NXOpen.Session.UndoMarkId markId7;
markId7 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Create Sketch");
theSession.DeleteUndoMark(markId7, null);
NXOpen.Session.UndoMarkId markId8;
markId8 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Create Sketch");
theSession.Preferences.Sketch.CreateInferredConstraints = true;
theSession.Preferences.Sketch.ContinuousAutoDimensioning = true;
theSession.Preferences.Sketch.DimensionLabel = NXOpen.Preferences.SketchPreferences.DimensionLabelType.Expression;
theSession.Preferences.Sketch.TextSizeFixed = true;
theSession.Preferences.Sketch.FixedTextSize = 3.0;
theSession.Preferences.Sketch.ConstraintSymbolSize = 3.0;
theSession.Preferences.Sketch.DisplayObjectColor = false;
theSession.Preferences.Sketch.DisplayObjectName = true;
NXOpen.NXObject nXObject2;
nXObject2 = sketchInPlaceBuilder1.Commit();
NXOpen.Sketch sketch1 = (NXOpen.Sketch)nXObject2;
NXOpen.Features.Feature feature1;
feature1 = sketch1.Feature;
NXOpen.Session.UndoMarkId markId9;
markId9 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "update");
int nErrs1;
nErrs1 = theSession.UpdateManager.DoUpdate(markId9);
sketch1.Activate(NXOpen.Sketch.ViewReorient.True);
theSession.DeleteUndoMark(markId8, null);
theSession.SetUndoMarkName(markId6, "Create Sketch");
sketchInPlaceBuilder1.Destroy();
sketchAlongPathBuilder1.Destroy();
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression2);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression1);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
// ----------------------------------------------
// Menu: Insert->Sketch Curve->Line...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId10;
markId10 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Profile short list");
NXOpen.Session.UndoMarkId markId11;
markId11 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");
NXOpen.Expression expression3;
expression3 = workPart.Expressions.CreateSystemExpression(length_string);
theSession.SetUndoMarkVisibility(markId11, "Curve", NXOpen.Session.MarkVisibility.Visible);
NXOpen.Point3d startPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Point3d endPoint1 = new NXOpen.Point3d(length, 0.0, 0.0);
NXOpen.Line line1;
line1 = workPart.Curves.CreateLine(startPoint1, endPoint1);
theSession.ActiveSketch.AddGeometry(line1, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
NXOpen.Sketch.ConstraintGeometry geom1_1 = new NXOpen.Sketch.ConstraintGeometry();
geom1_1.Geometry = line1;
geom1_1.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom1_1.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_1 = new NXOpen.Sketch.ConstraintGeometry();
NXOpen.Features.DatumCsys datumCsys2 = (NXOpen.Features.DatumCsys)workPart.Features.FindObject("SKETCH(1:1B)");
NXOpen.Point point3 = (NXOpen.Point)datumCsys2.FindObject("POINT 1");
geom2_1.Geometry = point3;
geom2_1.PointType = NXOpen.Sketch.ConstraintPointType.None;
geom2_1.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint1;
sketchGeometricConstraint1 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_1, geom2_1);
NXOpen.Sketch.ConstraintGeometry geom1 = new NXOpen.Sketch.ConstraintGeometry();
geom1.Geometry = line1;
geom1.PointType = NXOpen.Sketch.ConstraintPointType.None;
geom1.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint2;
sketchGeometricConstraint2 = theSession.ActiveSketch.CreateHorizontalConstraint(geom1);
NXOpen.Sketch.DimensionGeometry dimObject1_1 = new NXOpen.Sketch.DimensionGeometry();
dimObject1_1.Geometry = line1;
dimObject1_1.AssocType = NXOpen.Sketch.AssocType.StartPoint;
dimObject1_1.AssocValue = 0;
dimObject1_1.HelpPoint.X = 0.0;
dimObject1_1.HelpPoint.Y = 0.0;
dimObject1_1.HelpPoint.Z = 0.0;
NXOpen.NXObject nullNXOpen_NXObject = null;
dimObject1_1.View = nullNXOpen_NXObject;
NXOpen.Sketch.DimensionGeometry dimObject2_1 = new NXOpen.Sketch.DimensionGeometry();
dimObject2_1.Geometry = line1;
dimObject2_1.AssocType = NXOpen.Sketch.AssocType.EndPoint;
dimObject2_1.AssocValue = 0;
dimObject2_1.HelpPoint.X = 0.0;
dimObject2_1.HelpPoint.Y = 0.0;
dimObject2_1.HelpPoint.Z = 0.0;
dimObject2_1.View = nullNXOpen_NXObject;
NXOpen.Point3d dimOrigin1 = new NXOpen.Point3d(45.0, -9.0598069411704, 0.0);
NXOpen.SketchDimensionalConstraint sketchDimensionalConstraint1;
sketchDimensionalConstraint1 = theSession.ActiveSketch.CreateDimension(NXOpen.Sketch.ConstraintType.ParallelDim, dimObject1_1, dimObject2_1, dimOrigin1, expression3, NXOpen.Sketch.DimensionOption.CreateAsDriving);
NXOpen.SketchHelpedDimensionalConstraint sketchHelpedDimensionalConstraint1 = (NXOpen.SketchHelpedDimensionalConstraint)sketchDimensionalConstraint1;
NXOpen.Annotations.Dimension dimension1;
dimension1 = sketchHelpedDimensionalConstraint1.AssociatedDimension;
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId12;
markId12 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");
NXOpen.Expression expression4;
expression4 = workPart.Expressions.CreateSystemExpression(heightA_string);
NXOpen.Expression expression5;
expression5 = workPart.Expressions.CreateSystemExpression(length_string);
workPart.Expressions.Edit(expression4, heightA_string);
theSession.SetUndoMarkVisibility(markId12, "Curve", NXOpen.Session.MarkVisibility.Visible);
NXOpen.Point3d startPoint2 = new NXOpen.Point3d(length, 0.0, 0.0);
NXOpen.Point3d endPoint2 = new NXOpen.Point3d(length, heightA, 0.0);
NXOpen.Line line2;
line2 = workPart.Curves.CreateLine(startPoint2, endPoint2);
theSession.ActiveSketch.AddGeometry(line2, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
NXOpen.Sketch.ConstraintGeometry geom1_2 = new NXOpen.Sketch.ConstraintGeometry();
geom1_2.Geometry = line2;
geom1_2.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom1_2.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_2 = new NXOpen.Sketch.ConstraintGeometry();
geom2_2.Geometry = line1;
geom2_2.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom2_2.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint3;
sketchGeometricConstraint3 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_2, geom2_2);
NXOpen.Sketch.ConstraintGeometry geom2 = new NXOpen.Sketch.ConstraintGeometry();
geom2.Geometry = line2;
geom2.PointType = NXOpen.Sketch.ConstraintPointType.None;
geom2.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint4;
sketchGeometricConstraint4 = theSession.ActiveSketch.CreateVerticalConstraint(geom2);
workPart.Expressions.Delete(expression5);
NXOpen.Sketch.DimensionGeometry dimObject1_2 = new NXOpen.Sketch.DimensionGeometry();
dimObject1_2.Geometry = line2;
dimObject1_2.AssocType = NXOpen.Sketch.AssocType.StartPoint;
dimObject1_2.AssocValue = 0;
dimObject1_2.HelpPoint.X = 0.0;
dimObject1_2.HelpPoint.Y = 0.0;
dimObject1_2.HelpPoint.Z = 0.0;
dimObject1_2.View = nullNXOpen_NXObject;
NXOpen.Sketch.DimensionGeometry dimObject2_2 = new NXOpen.Sketch.DimensionGeometry();
dimObject2_2.Geometry = line2;
dimObject2_2.AssocType = NXOpen.Sketch.AssocType.EndPoint;
dimObject2_2.AssocValue = 0;
dimObject2_2.HelpPoint.X = 0.0;
dimObject2_2.HelpPoint.Y = 0.0;
dimObject2_2.HelpPoint.Z = 0.0;
dimObject2_2.View = nullNXOpen_NXObject;
NXOpen.Point3d dimOrigin2 = new NXOpen.Point3d(99.0598069411704, 15.0, 0.0);
NXOpen.SketchDimensionalConstraint sketchDimensionalConstraint2;
sketchDimensionalConstraint2 = theSession.ActiveSketch.CreateDimension(NXOpen.Sketch.ConstraintType.ParallelDim, dimObject1_2, dimObject2_2, dimOrigin2, expression4, NXOpen.Sketch.DimensionOption.CreateAsDriving);
NXOpen.SketchHelpedDimensionalConstraint sketchHelpedDimensionalConstraint2 = (NXOpen.SketchHelpedDimensionalConstraint)sketchDimensionalConstraint2;
NXOpen.Annotations.Dimension dimension2;
dimension2 = sketchHelpedDimensionalConstraint2.AssociatedDimension;
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId13;
markId13 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");
NXOpen.Expression expression6;
expression6 = workPart.Expressions.CreateSystemExpression(heightB_string);
NXOpen.Expression expression7;
expression7 = workPart.Expressions.CreateSystemExpression(length_string);
theSession.SetUndoMarkVisibility(markId13, "Curve", NXOpen.Session.MarkVisibility.Visible);
NXOpen.Point3d startPoint3 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Point3d endPoint3 = new NXOpen.Point3d(7.02873218749514e-014, heightB, 0.0);
NXOpen.Line line3;
line3 = workPart.Curves.CreateLine(startPoint3, endPoint3);
theSession.ActiveSketch.AddGeometry(line3, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
NXOpen.Sketch.ConstraintGeometry geom1_3 = new NXOpen.Sketch.ConstraintGeometry();
geom1_3.Geometry = line3;
geom1_3.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom1_3.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_3 = new NXOpen.Sketch.ConstraintGeometry();
geom2_3.Geometry = line1;
geom2_3.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom2_3.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint5;
sketchGeometricConstraint5 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_3, geom2_3);
NXOpen.Sketch.ConstraintGeometry geom3 = new NXOpen.Sketch.ConstraintGeometry();
geom3.Geometry = line3;
geom3.PointType = NXOpen.Sketch.ConstraintPointType.None;
geom3.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint6;
sketchGeometricConstraint6 = theSession.ActiveSketch.CreateVerticalConstraint(geom3);
workPart.Expressions.Delete(expression7);
NXOpen.Sketch.DimensionGeometry dimObject1_3 = new NXOpen.Sketch.DimensionGeometry();
dimObject1_3.Geometry = line3;
dimObject1_3.AssocType = NXOpen.Sketch.AssocType.StartPoint;
dimObject1_3.AssocValue = 0;
dimObject1_3.HelpPoint.X = 0.0;
dimObject1_3.HelpPoint.Y = 0.0;
dimObject1_3.HelpPoint.Z = 0.0;
dimObject1_3.View = nullNXOpen_NXObject;
NXOpen.Sketch.DimensionGeometry dimObject2_3 = new NXOpen.Sketch.DimensionGeometry();
dimObject2_3.Geometry = line3;
dimObject2_3.AssocType = NXOpen.Sketch.AssocType.EndPoint;
dimObject2_3.AssocValue = 0;
dimObject2_3.HelpPoint.X = 0.0;
dimObject2_3.HelpPoint.Y = 0.0;
dimObject2_3.HelpPoint.Z = 0.0;
dimObject2_3.View = nullNXOpen_NXObject;
NXOpen.Point3d dimOrigin3 = new NXOpen.Point3d(9.05980694117043, heightA, 0.0);
NXOpen.SketchDimensionalConstraint sketchDimensionalConstraint3;
sketchDimensionalConstraint3 = theSession.ActiveSketch.CreateDimension(NXOpen.Sketch.ConstraintType.ParallelDim, dimObject1_3, dimObject2_3, dimOrigin3, expression6, NXOpen.Sketch.DimensionOption.CreateAsDriving);
NXOpen.SketchHelpedDimensionalConstraint sketchHelpedDimensionalConstraint3 = (NXOpen.SketchHelpedDimensionalConstraint)sketchDimensionalConstraint3;
NXOpen.Annotations.Dimension dimension3;
dimension3 = sketchHelpedDimensionalConstraint3.AssociatedDimension;
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId14;
markId14 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Curve");
theSession.SetUndoMarkVisibility(markId14, "Curve", NXOpen.Session.MarkVisibility.Visible);
NXOpen.Point3d startPoint4 = new NXOpen.Point3d(0.0, heightB, 0.0);
NXOpen.Point3d endPoint4 = new NXOpen.Point3d(length, heightA, 0.0);
//NXOpen.Point3d endPoint4 = new NXOpen.Point3d(90.0, 29.9999999999998, 0.0);
NXOpen.Line line4;
line4 = workPart.Curves.CreateLine(startPoint4, endPoint4);
theSession.ActiveSketch.AddGeometry(line4, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
NXOpen.Sketch.ConstraintGeometry geom1_4 = new NXOpen.Sketch.ConstraintGeometry();
geom1_4.Geometry = line4;
geom1_4.PointType = NXOpen.Sketch.ConstraintPointType.StartVertex;
geom1_4.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_4 = new NXOpen.Sketch.ConstraintGeometry();
geom2_4.Geometry = line3;
geom2_4.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom2_4.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint7;
sketchGeometricConstraint7 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_4, geom2_4);
NXOpen.Sketch.ConstraintGeometry geom1_5 = new NXOpen.Sketch.ConstraintGeometry();
geom1_5.Geometry = line4;
geom1_5.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom1_5.SplineDefiningPointIndex = 0;
NXOpen.Sketch.ConstraintGeometry geom2_5 = new NXOpen.Sketch.ConstraintGeometry();
geom2_5.Geometry = line2;
geom2_5.PointType = NXOpen.Sketch.ConstraintPointType.EndVertex;
geom2_5.SplineDefiningPointIndex = 0;
NXOpen.SketchGeometricConstraint sketchGeometricConstraint8;
sketchGeometricConstraint8 = theSession.ActiveSketch.CreateCoincidentConstraint(geom1_5, geom2_5);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
// ----------------------------------------------
// Menu: File->Finish Sketch
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId15;
markId15 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Deactivate Sketch");
theSession.ActiveSketch.Deactivate(NXOpen.Sketch.ViewReorient.False, NXOpen.Sketch.UpdateLevel.Model);
// ----------------------------------------------
// Menu: Insert->Design Feature->Extrude...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId16;
markId16 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
NXOpen.Features.Feature nullNXOpen_Features_Feature = null;
if (!workPart.Preferences.Modeling.GetHistoryMode())
{
throw new Exception("Create or edit of a Feature was recorded in History Mode but playback is in History-Free Mode.");
}
NXOpen.Features.ExtrudeBuilder extrudeBuilder1;
extrudeBuilder1 = workPart.Features.CreateExtrudeBuilder(nullNXOpen_Features_Feature);
NXOpen.Section section1;
section1 = workPart.Sections.CreateSection(0.0095, 0.01, 0.5);
extrudeBuilder1.Section = section1;
extrudeBuilder1.AllowSelfIntersectingSection(true);
NXOpen.Unit unit2;
unit2 = extrudeBuilder1.Draft.FrontDraftAngle.Units;
NXOpen.Expression expression8;
expression8 = workPart.Expressions.CreateSystemExpressionWithUnits("2.00", unit2);
extrudeBuilder1.DistanceTolerance = 0.01;
extrudeBuilder1.BooleanOperation.Type = NXOpen.GeometricUtilities.BooleanOperation.BooleanType.Create;
NXOpen.Body[] targetBodies1 = new NXOpen.Body[1];
NXOpen.Body nullNXOpen_Body = null;
targetBodies1[0] = nullNXOpen_Body;
extrudeBuilder1.BooleanOperation.SetTargetBodies(targetBodies1);
extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";
extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = "25";
extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";
extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";
extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";
extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = thickness_string;
extrudeBuilder1.Draft.FrontDraftAngle.RightHandSide = "2";
extrudeBuilder1.Draft.BackDraftAngle.RightHandSide = "2";
extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";
extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";
NXOpen.GeometricUtilities.SmartVolumeProfileBuilder smartVolumeProfileBuilder1;
smartVolumeProfileBuilder1 = extrudeBuilder1.SmartVolumeProfile;
smartVolumeProfileBuilder1.OpenProfileSmartVolumeOption = false;
smartVolumeProfileBuilder1.CloseProfileRule = NXOpen.GeometricUtilities.SmartVolumeProfileBuilder.CloseProfileRuleType.Fci;
theSession.SetUndoMarkName(markId16, "Extrude Dialog");
section1.DistanceTolerance = 0.01;
section1.ChainingTolerance = 0.0095;
section1.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.OnlyCurves);
NXOpen.Session.UndoMarkId markId17;
markId17 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "section mark");
NXOpen.Session.UndoMarkId markId18;
markId18 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, null);
NXOpen.Features.Feature[] features1 = new NXOpen.Features.Feature[1];
NXOpen.Features.SketchFeature sketchFeature1 = (NXOpen.Features.SketchFeature)feature1;
features1[0] = sketchFeature1;
NXOpen.CurveFeatureRule curveFeatureRule1;
curveFeatureRule1 = workPart.ScRuleFactory.CreateRuleCurveFeature(features1);
section1.AllowSelfIntersection(true);
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
rules1[0] = curveFeatureRule1;
NXOpen.Point3d helpPoint1 = new NXOpen.Point3d(53.8762063337749, 42.0412645554082, 0.0);
section1.AddToSection(rules1, line4, nullNXOpen_NXObject, nullNXOpen_NXObject, helpPoint1, NXOpen.Section.Mode.Create, false);
theSession.DeleteUndoMark(markId18, null);
NXOpen.Direction direction1;
direction1 = workPart.Directions.CreateDirection(sketch1, NXOpen.Sense.Forward, NXOpen.SmartObject.UpdateOption.WithinModeling);
extrudeBuilder1.Direction = direction1;
theSession.DeleteUndoMark(markId17, null);
NXOpen.Session.UndoMarkId markId19;
markId19 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Extrude");
theSession.DeleteUndoMark(markId19, null);
NXOpen.Session.UndoMarkId markId20;
markId20 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Extrude");
extrudeBuilder1.ParentFeatureInternal = false;
NXOpen.Features.Feature feature2;
feature2 = extrudeBuilder1.CommitFeature();
theSession.DeleteUndoMark(markId20, null);
theSession.SetUndoMarkName(markId16, "Extrude");
NXOpen.Expression expression9 = extrudeBuilder1.Limits.StartExtend.Value;
NXOpen.Expression expression10 = extrudeBuilder1.Limits.EndExtend.Value;
extrudeBuilder1.Destroy();
workPart.Expressions.Delete(expression8);
// ----------------------------------------------
// Menu: File->Save
// ----------------------------------------------
NXOpen.PartSaveStatus partSaveStatus1;
partSaveStatus1 = workPart.Save(NXOpen.BasePart.SaveComponents.True, NXOpen.BasePart.CloseAfterSave.False);
partSaveStatus1.Dispose();
// ----------------------------------------------
// Menu: File->Export->IGES...
// ----------------------------------------------
NXOpen.Session.UndoMarkId markId21;
markId21 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Visible, "Start");
NXOpen.IgesCreator igesCreator1;
igesCreator1 = theSession.DexManager.CreateIgesCreator();
igesCreator1.ExportModelData = true;
igesCreator1.ExportDrawings = true;
igesCreator1.MapTabCylToBSurf = true;
igesCreator1.BcurveTol = 0.0508;
igesCreator1.IdenticalPointResolution = 0.001;
igesCreator1.MaxThreeDMdlSpace = 10000.0;
igesCreator1.ObjectTypes.Curves = true;
igesCreator1.ObjectTypes.Surfaces = true;
igesCreator1.ObjectTypes.Annotations = true;
igesCreator1.ObjectTypes.Structures = true;
igesCreator1.ObjectTypes.Solids = true;
igesCreator1.OutputFile = part_name_igs;
igesCreator1.SettingsFile = "C:\\Program Files\\Siemens\\NX 10.0\\iges\\igesexport.def";
igesCreator1.MaxLineThickness = 2.0;
igesCreator1.SysDefmaxThreeDMdlSpace = true;
igesCreator1.SysDefidenticalPointResolution = true;
igesCreator1.InputFile = part_name_prt;
igesCreator1.OutputFile = part_name_igs;
theSession.SetUndoMarkName(markId21, "Export to IGES Options Dialog");
igesCreator1.OutputFile = part_name_igs;
NXOpen.Session.UndoMarkId markId22;
markId22 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Export to IGES Options");
theSession.DeleteUndoMark(markId22, null);
NXOpen.Session.UndoMarkId markId23;
markId23 = theSession.SetUndoMark(NXOpen.Session.MarkVisibility.Invisible, "Export to IGES Options");
igesCreator1.FileSaveFlag = false;
igesCreator1.LayerMask = "1-256";
igesCreator1.DrawingList = "";
igesCreator1.ViewList = "Top,Front,Right,Back,Bottom,Left,Isometric,Trimetric,User Defined";
NXOpen.NXObject nXObject3;
nXObject3 = igesCreator1.Commit();
theSession.DeleteUndoMark(markId23, null);
theSession.SetUndoMarkName(markId21, "Export to IGES Options");
igesCreator1.Destroy();
// ----------------------------------------------
// Menu: Tools->Journal->Stop Recording
// ----------------------------------------------
Console.WriteLine("Finishing NX Golden Cantilever Journal");
}
/// <summary>
/// 投影点
/// </summary>
/// <param name="features"></param>
/// <param name="point_to_project">要投影的点</param>
/// <param name="faces_to_project_to">投影到的面</param>
/// <param name="project_direction3d">投影方向，正反向均可</param>
/// <returns></returns>
public static ProjectCurve CreateProjectCurve(this FeatureCollection features, Point point_to_project, Face[] faces_to_project_to, Vector3d project_direction3d)
{
NXOpen.Features.ProjectCurveBuilder projectCurveBuilder = features.CreateProjectCurveBuilder(null);
projectCurveBuilder.CurveFitData.Tolerance = 0.01;
projectCurveBuilder.CurveFitData.AngleTolerance = 0.5;
projectCurveBuilder.ProjectionDirectionMethod = NXOpen.Features.ProjectCurveBuilder.DirectionType.AlongVector;
projectCurveBuilder.AngleToProjectionVector.RightHandSide = "0";
projectCurveBuilder.SectionToProject.DistanceTolerance = 0.01;
projectCurveBuilder.SectionToProject.ChainingTolerance = 0.0095;
projectCurveBuilder.SectionToProject.AngleTolerance = 0.5;
projectCurveBuilder.SectionToProject.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.CurvesAndPoints);
#if NX12
NXOpen.CurveDumbRule curveDumbRule1 = (WorkPart as BasePart).ScRuleFactory.CreateRuleCurveDumbFromPoints(new Point[] { point_to_project });
#else
NXOpen.CurveDumbRule curveDumbRule1 = WorkPart.ScRuleFactory.CreateRuleCurveDumbFromPoints(new Point[] { point_to_project });
#endif
projectCurveBuilder.SectionToProject.AllowSelfIntersection(true);
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1] {
curveDumbRule1
};
projectCurveBuilder.SectionToProject.AddToSection(rules1, null, null, null, new Point3d(), NXOpen.Section.Mode.Create, false);
NXOpen.ScCollector scCollector = WorkPart.ScCollectors.CreateCollector();
#if NX12
NXOpen.FaceDumbRule faceDumbRule = (WorkPart as BasePart).ScRuleFactory.CreateRuleFaceDumb(faces_to_project_to);
#else
NXOpen.FaceDumbRule faceDumbRule = WorkPart.ScRuleFactory.CreateRuleFaceDumb(faces_to_project_to);
#endif
NXOpen.SelectionIntentRule[] rules2 = new NXOpen.SelectionIntentRule[1] {
faceDumbRule
};
scCollector.ReplaceRules(rules2, false);
bool added1 = projectCurveBuilder.FaceToProjectTo.Add(scCollector);
NXOpen.Direction direction = WorkPart.Directions.CreateDirection(new Point3d(), project_direction3d, NXOpen.SmartObject.UpdateOption.WithinModeling);
projectCurveBuilder.ProjectionVector = direction;
projectCurveBuilder.ProjectionOption = ProjectCurveBuilder.ProjectionOptionType.ProjectBothSides;
ProjectCurve nXObject = (ProjectCurve)projectCurveBuilder.Commit();
projectCurveBuilder.SectionToProject.CleanMappingData();
projectCurveBuilder.Destroy();
return(nXObject);
}
public void CreateBracket(double thickness, double length, double height, double holeradius, double holedistance)
{
NXOpen.Point3d point1 = new NXOpen.Point3d(0, 0, 0);
NXOpen.Point3d point2 = new NXOpen.Point3d(0, 0, height);
NXOpen.Point3d point3 = new NXOpen.Point3d(0, thickness, height);
NXOpen.Point3d point4 = new NXOpen.Point3d(0, thickness, thickness);
NXOpen.Point3d point5 = new NXOpen.Point3d(0, length, thickness);
NXOpen.Point3d point6 = new NXOpen.Point3d(0, length, 0);
IBaseCurve[] curves1 = new IBaseCurve[6]
{
workPart.Curves.CreateLine(point1, point2),
workPart.Curves.CreateLine(point2, point3),
workPart.Curves.CreateLine(point3, point4),
workPart.Curves.CreateLine(point4, point5),
workPart.Curves.CreateLine(point5, point6),
workPart.Curves.CreateLine(point6, point1)
};
CreateExtrude(curves1, true, 52.0, new Vector3d(1.0, 0, 0));
//Left Line
NXOpen.Point3d point7 = new NXOpen.Point3d(-21.0, 0, height - 8.0);
NXOpen.Point3d point8 = new NXOpen.Point3d(-21, 0, height - 16.0);
//Right LIne
NXOpen.Point3d point9 = new NXOpen.Point3d(-15, 0, height - 16.0);
NXOpen.Point3d point10 = new NXOpen.Point3d(-15, 0, height - 8.0);
//Top Arc
NXOpen.Point3d Center1 = new NXOpen.Point3d(-18, 0, height - 8.0);
NXOpen.Vector3d dir1 = new NXOpen.Vector3d(-1.0, 0, 0);
NXOpen.Vector3d dir2 = new NXOpen.Vector3d(0, 0, -1.0);
//Bottom Arc
NXOpen.Point3d Center2 = new NXOpen.Point3d(-18, 0, height - 16.0);
IBaseCurve[] curves2 = new IBaseCurve[4]
{
workPart.Curves.CreateLine(point7, point8),
workPart.Curves.CreateArc(Center2, dir1, dir2, 3.0, 0, Math.PI),
workPart.Curves.CreateLine(point9, point10),
workPart.Curves.CreateArc(Center1, dir1, dir2, 3.0, Math.PI, 2 * Math.PI)
};
//Right Side
//Left Line
NXOpen.Point3d point11 = new NXOpen.Point3d(21.0, 0, height - 8.0);
NXOpen.Point3d point12 = new NXOpen.Point3d(21, 0, height - 16.0);
//Right LIne
NXOpen.Point3d point13 = new NXOpen.Point3d(15, 0, height - 16.0);
NXOpen.Point3d point14 = new NXOpen.Point3d(15, 0, height - 8.0);
//Top Arc
NXOpen.Point3d Center3 = new NXOpen.Point3d(18, 0, height - 8.0);
//Bottom Arc
NXOpen.Point3d Center4 = new NXOpen.Point3d(18, 0, height - 16.0);
IBaseCurve[] curves3 = new IBaseCurve[4]
{
workPart.Curves.CreateLine(point11, point12),
workPart.Curves.CreateArc(Center4, dir1, dir2, 3.0, 0, Math.PI),
workPart.Curves.CreateLine(point13, point14),
workPart.Curves.CreateArc(Center3, dir1, dir2, 3.0, Math.PI, 2 * Math.PI)
};
CreateExtrude(curves2, false, 2.0 * thickness, new Vector3d(0, 1, 0));
CreateExtrude(curves3, false, 2.0 * thickness, new Vector3d(0, 1, 0));
//EdgeBlend Start
NXOpen.Features.EdgeBlendBuilder edgeBlendBuilder1 = workPart.Features.CreateEdgeBlendBuilder(null);
NXOpen.ScCollector scCollector1 = workPart.ScCollectors.CreateCollector();
NXOpen.Edge[] seedEdges1 = new NXOpen.Edge[2];
NXOpen.Features.Extrude extrude1 = (NXOpen.Features.Extrude)workPart.Features.ToArray().OfType <NXOpen.Features.Extrude>().First();
Edge[] edges = extrude1.GetBodies()[0].GetEdges();
NXOpen.Point3d edgeendpoint1 = new NXOpen.Point3d(26, 0, height);
NXOpen.Point3d edgeendpoint2 = new NXOpen.Point3d(26, thickness, height);
NXOpen.Point3d edgeendpoint3 = new NXOpen.Point3d(-26, 0, height);
NXOpen.Point3d edgeendpoint4 = new NXOpen.Point3d(-26, thickness, height);
Edge edge1 = null;
Edge edge2 = null;
for (int i = 0; i < edges.Length; i++)
{
NXOpen.Point3d endpoint;
NXOpen.Point3d endpoint2;
edges[i].GetVertices(out endpoint, out endpoint2);
if (Math.Abs(edgeendpoint1.X - endpoint.X) < .01 && Math.Abs(edgeendpoint1.Y - endpoint.Y) < .01 && Math.Abs(edgeendpoint1.Z - endpoint.Z) < .01 && Math.Abs(edgeendpoint2.X - endpoint2.X) < .01 && Math.Abs(edgeendpoint2.Y - endpoint2.Y) < .01 && Math.Abs(edgeendpoint2.Z - endpoint2.Z) < .01)
{
edge1 = edges[i];
}
else if (Math.Abs(edgeendpoint3.X - endpoint.X) < .01 && Math.Abs(edgeendpoint3.Y - endpoint.Y) < .01 && Math.Abs(edgeendpoint3.Z - endpoint.Z) < .01 && Math.Abs(edgeendpoint4.X - endpoint2.X) < .01 && Math.Abs(edgeendpoint4.Y - endpoint2.Y) < .01 && Math.Abs(edgeendpoint4.Z - endpoint2.Z) < .01)
{
edge2 = edges[i];
}
if (edge1 != null && edge2 != null)
{
break;
}
}
seedEdges1[0] = edge1;
seedEdges1[1] = edge2;
NXOpen.EdgeMultipleSeedTangentRule edgeMultipleSeedTangentRule1;
edgeMultipleSeedTangentRule1 = workPart.ScRuleFactory.CreateRuleEdgeMultipleSeedTangent(seedEdges1, 0.5, true);
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
rules1[0] = edgeMultipleSeedTangentRule1;
scCollector1.ReplaceRules(rules1, false);
int csIndex1;
csIndex1 = edgeBlendBuilder1.AddChainset(scCollector1, "8");
edgeBlendBuilder1.CommitFeature();
edgeBlendBuilder1.Destroy();
//EdgeBlend End
//Circle's Extrude
NXOpen.Point3d holecenter1 = new NXOpen.Point3d(holedistance / 2, 20, 10);
NXOpen.Point3d holecenter2 = new NXOpen.Point3d(-holedistance / 2, 20, 10);
NXOpen.Vector3d dir3 = new NXOpen.Vector3d(0, -1.0, 0);
NXOpen.Vector3d dir4 = new NXOpen.Vector3d(1, 0, 0);
IBaseCurve[] hole1 = new IBaseCurve[1]
{
workPart.Curves.CreateArc(holecenter1, dir3, dir4, holeradius, 0, 2 * Math.PI),
};
IBaseCurve[] hole2 = new IBaseCurve[1]
{
workPart.Curves.CreateArc(holecenter2, dir3, dir4, holeradius, 0, 2 * Math.PI),
};
CreateExtrude(hole1, false, 2 * thickness, new Vector3d(0, 0, 1));
CreateExtrude(hole2, false, 2 * thickness, new Vector3d(0, 0, 1));
//Big Slot
//Top Line
NXOpen.Point3d slotpt1 = new NXOpen.Point3d(-6, 44, 0);
NXOpen.Point3d slotpt2 = new NXOpen.Point3d(-6, length - 14.0, 0);
//BOttom Line
NXOpen.Point3d slotpt4 = new NXOpen.Point3d(6, 44, 0);
NXOpen.Point3d slotpt3 = new NXOpen.Point3d(6, length - 14.0, 0);
//Right Arc
NXOpen.Point3d slotcenter1 = new NXOpen.Point3d(0, 44, 0);
//Left Arc
NXOpen.Point3d slotcenter2 = new NXOpen.Point3d(0, length - 14.0, 0);
IBaseCurve[] slotcurve = new IBaseCurve[4]
{
workPart.Curves.CreateLine(slotpt1, slotpt2),
workPart.Curves.CreateArc(slotcenter2, dir3, dir4, 6.0, Math.PI / 2, 3 * Math.PI / 2),
workPart.Curves.CreateLine(slotpt3, slotpt4),
workPart.Curves.CreateArc(slotcenter1, dir3, dir4, 6.0, -Math.PI / 2, Math.PI / 2)
};
CreateExtrude(slotcurve, false, 2 * thickness, new Vector3d(0, 0, 1));
//Curvey Part
//bottom Arc
NXOpen.Point3d botarc = new NXOpen.Point3d(26, 44, 0);
//bottom line
NXOpen.Point3d botpt1 = new NXOpen.Point3d(14, 44, 0);
NXOpen.Point3d botpt2 = new NXOpen.Point3d(14, length - 14.0, 0);
//Big Arc
NXOpen.Point3d sidearc = new NXOpen.Point3d(0, length - 14.0, 0);
//Top Line
NXOpen.Point3d toppt2 = new NXOpen.Point3d(-14, 44, 0);
NXOpen.Point3d toppt1 = new NXOpen.Point3d(-14, length - 14.0, 0);
//Right Arc
NXOpen.Point3d toparc = new NXOpen.Point3d(-26, 44, 0);
//OUtline
NXOpen.Point3d out1 = new NXOpen.Point3d(-26, 32, 0);
NXOpen.Point3d out2 = new NXOpen.Point3d(-28, 32, 0);
NXOpen.Point3d out3 = new NXOpen.Point3d(-28, length + 10, 0);
NXOpen.Point3d out4 = new NXOpen.Point3d(28, length + 10, 0);
NXOpen.Point3d out5 = new NXOpen.Point3d(28, 32, 0);
NXOpen.Point3d out6 = new NXOpen.Point3d(26, 32, 0);
IBaseCurve[] bigcutcurve = new IBaseCurve[10]
{
workPart.Curves.CreateArc(botarc, dir3, dir4, 12, -Math.PI / 2, 0),
workPart.Curves.CreateLine(botpt1, botpt2),
workPart.Curves.CreateArc(sidearc, dir3, dir4, 14, Math.PI / 2, 3 * Math.PI / 2),
workPart.Curves.CreateLine(toppt1, toppt2),
workPart.Curves.CreateArc(toparc, dir3, dir4, 12, 0, Math.PI / 2),
workPart.Curves.CreateLine(out1, out2),
workPart.Curves.CreateLine(out2, out3),
workPart.Curves.CreateLine(out3, out4),
workPart.Curves.CreateLine(out4, out5),
workPart.Curves.CreateLine(out5, out6)
};
CreateExtrude(bigcutcurve, false, 2 * thickness, new Vector3d(0, 0, 1));
}
public static void Main(string[] args)
{
NXOpen.Session theSession = NXOpen.Session.GetSession();
// ----------------------------------------------
// Menu: File->New...
// ----------------------------------------------
//Variable Declaration
double a = double.Parse(args[0]);
double G = 1.618;
double b = G * a;
double L = 10;
double t = double.Parse(args[1]);
NXOpen.FileNew fileNew1;
fileNew1 = theSession.Parts.FileNew();
fileNew1.TemplateFileName = "model-plain-1-mm-template.prt";
fileNew1.UseBlankTemplate = false;
fileNew1.ApplicationName = "ModelTemplate";
fileNew1.Units = NXOpen.Part.Units.Millimeters;
fileNew1.RelationType = "";
fileNew1.UsesMasterModel = "No";
fileNew1.TemplateType = NXOpen.FileNewTemplateType.Item;
fileNew1.TemplatePresentationName = "Model";
fileNew1.ItemType = "";
fileNew1.Specialization = "";
fileNew1.SetCanCreateAltrep(false);
fileNew1.NewFileName = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.prt";
fileNew1.MasterFileName = "";
fileNew1.MakeDisplayedPart = true;
NXOpen.NXObject nXObject1;
nXObject1 = fileNew1.Commit();
NXOpen.Part workPart = theSession.Parts.Work;
NXOpen.Part displayPart = theSession.Parts.Display;
fileNew1.Destroy();
theSession.ApplicationSwitchImmediate("UG_APP_MODELING");
// ----------------------------------------------
// Menu: Insert->Sketch...
// ----------------------------------------------
NXOpen.Sketch nullNXOpen_Sketch = null;
NXOpen.SketchInPlaceBuilder sketchInPlaceBuilder1;
sketchInPlaceBuilder1 = workPart.Sketches.CreateNewSketchInPlaceBuilder(nullNXOpen_Sketch);
NXOpen.Unit unit1 = (NXOpen.Unit)workPart.UnitCollection.FindObject("MilliMeter");
NXOpen.Expression expression1;
expression1 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.Expression expression2;
expression2 = workPart.Expressions.CreateSystemExpressionWithUnits("0", unit1);
NXOpen.SketchAlongPathBuilder sketchAlongPathBuilder1;
sketchAlongPathBuilder1 = workPart.Sketches.CreateSketchAlongPathBuilder(nullNXOpen_Sketch);
sketchAlongPathBuilder1.PlaneLocation.Expression.RightHandSide = "0";
NXOpen.DatumPlane datumPlane1 = (NXOpen.DatumPlane)workPart.Datums.FindObject("DATUM_CSYS(0) YZ plane");
NXOpen.Point3d point1 = new NXOpen.Point3d(0, 0, 0);
sketchInPlaceBuilder1.PlaneOrFace.SetValue(datumPlane1, workPart.ModelingViews.WorkView, point1);
NXOpen.Features.DatumCsys datumCsys1 = (NXOpen.Features.DatumCsys)workPart.Features.FindObject("DATUM_CSYS(0)");
NXOpen.Point point2 = (NXOpen.Point)datumCsys1.FindObject("POINT 1");
sketchInPlaceBuilder1.SketchOrigin = point2;
sketchInPlaceBuilder1.PlaneOrFace.Value = null;
sketchInPlaceBuilder1.PlaneOrFace.Value = datumPlane1;
NXOpen.DatumAxis datumAxis1 = (NXOpen.DatumAxis)workPart.Datums.FindObject("DATUM_CSYS(0) X axis");
sketchInPlaceBuilder1.Axis.Value = datumAxis1;
theSession.Preferences.Sketch.CreateInferredConstraints = true;
theSession.Preferences.Sketch.ContinuousAutoDimensioning = true;
theSession.Preferences.Sketch.DimensionLabel = NXOpen.Preferences.SketchPreferences.DimensionLabelType.Expression;
theSession.Preferences.Sketch.TextSizeFixed = true;
theSession.Preferences.Sketch.FixedTextSize = 3.0;
theSession.Preferences.Sketch.ConstraintSymbolSize = 3.0;
theSession.Preferences.Sketch.DisplayObjectColor = false;
theSession.Preferences.Sketch.DisplayObjectName = true;
NXOpen.NXObject nXObject2;
nXObject2 = sketchInPlaceBuilder1.Commit();
NXOpen.Sketch sketch1 = (NXOpen.Sketch)nXObject2;
NXOpen.Features.Feature feature1;
feature1 = sketch1.Feature;
sketch1.Activate(NXOpen.Sketch.ViewReorient.True);
sketchInPlaceBuilder1.Destroy();
sketchAlongPathBuilder1.Destroy();
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression2);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
try
{
// Expression is still in use.
workPart.Expressions.Delete(expression1);
}
catch (NXException ex)
{
ex.AssertErrorCode(1050029);
}
// ----------------------------------------------
// Menu: Insert->Sketch Curve->Line...
// ----------------------------------------------
NXOpen.Point3d startPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Point3d endPoint1 = new NXOpen.Point3d(0, b, 0.0);
NXOpen.Line line1;
line1 = workPart.Curves.CreateLine(startPoint1, endPoint1);
theSession.ActiveSketch.AddGeometry(line1, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
//
NXOpen.Point3d startPoint2 = new NXOpen.Point3d(0.0, b, 0.0);
NXOpen.Point3d endPoint2 = new NXOpen.Point3d(L, a, 0.0);
NXOpen.Line line2;
line2 = workPart.Curves.CreateLine(startPoint2, endPoint2);
theSession.ActiveSketch.AddGeometry(line2, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Point3d startPoint3 = new NXOpen.Point3d(L, a, 0.0);
NXOpen.Point3d endPoint3 = new NXOpen.Point3d(L, 0.0, 0.0);
NXOpen.Line line3;
line3 = workPart.Curves.CreateLine(startPoint3, endPoint3);
theSession.ActiveSketch.AddGeometry(line3, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
NXOpen.Point3d startPoint4 = new NXOpen.Point3d(L, 0.0, 0.0);
NXOpen.Point3d endPoint4 = new NXOpen.Point3d(0.0, 0.0, 0.0);
NXOpen.Line line4;
line4 = workPart.Curves.CreateLine(startPoint4, endPoint4);
theSession.ActiveSketch.AddGeometry(line4, NXOpen.Sketch.InferConstraintsOption.InferNoConstraints);
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = false;
theSession.ActiveSketch.Update();
theSession.Preferences.Sketch.AutoDimensionsToArcCenter = true;
// ----------------------------------------------
// Dialog Begin Line
// ----------------------------------------------
// ----------------------------------------------
// Menu: File->Finish Sketch
// ----------------------------------------------
theSession.ActiveSketch.Deactivate(NXOpen.Sketch.ViewReorient.False, NXOpen.Sketch.UpdateLevel.Model);
// ----------------------------------------------
// Menu: Insert->Design Feature->Extrude...
// ----------------------------------------------
NXOpen.Features.Feature nullNXOpen_Features_Feature = null;
if (!workPart.Preferences.Modeling.GetHistoryMode())
{
throw new Exception("Create or edit of a Feature was recorded in History Mode but playback is in History-Free Mode.");
}
NXOpen.Features.ExtrudeBuilder extrudeBuilder1;
extrudeBuilder1 = workPart.Features.CreateExtrudeBuilder(nullNXOpen_Features_Feature);
NXOpen.Section section1;
section1 = workPart.Sections.CreateSection(0.0095, 0.01, 0.5);
extrudeBuilder1.Section = section1;
extrudeBuilder1.AllowSelfIntersectingSection(true);
NXOpen.Unit unit2;
unit2 = extrudeBuilder1.Draft.FrontDraftAngle.Units;
NXOpen.Expression expression7;
expression7 = workPart.Expressions.CreateSystemExpressionWithUnits("2.00", unit2);
extrudeBuilder1.DistanceTolerance = 0.01;
extrudeBuilder1.BooleanOperation.Type = NXOpen.GeometricUtilities.BooleanOperation.BooleanType.Create;
NXOpen.Body[] targetBodies1 = new NXOpen.Body[1];
NXOpen.Body nullNXOpen_Body = null;
targetBodies1[0] = nullNXOpen_Body;
extrudeBuilder1.BooleanOperation.SetTargetBodies(targetBodies1);
extrudeBuilder1.Limits.StartExtend.Value.RightHandSide = "0";
extrudeBuilder1.Limits.EndExtend.Value.RightHandSide = t.ToString();
extrudeBuilder1.Offset.StartOffset.RightHandSide = "0";
extrudeBuilder1.Offset.EndOffset.RightHandSide = "5";
NXOpen.GeometricUtilities.SmartVolumeProfileBuilder smartVolumeProfileBuilder1;
smartVolumeProfileBuilder1 = extrudeBuilder1.SmartVolumeProfile;
smartVolumeProfileBuilder1.OpenProfileSmartVolumeOption = false;
smartVolumeProfileBuilder1.CloseProfileRule = NXOpen.GeometricUtilities.SmartVolumeProfileBuilder.CloseProfileRuleType.Fci;
section1.DistanceTolerance = 0.01;
section1.ChainingTolerance = 0.0095;
section1.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.OnlyCurves);
NXOpen.Features.Feature[] features1 = new NXOpen.Features.Feature[1];
NXOpen.Features.SketchFeature sketchFeature1 = (NXOpen.Features.SketchFeature)feature1;
features1[0] = sketchFeature1;
NXOpen.CurveFeatureRule curveFeatureRule1;
curveFeatureRule1 = workPart.ScRuleFactory.CreateRuleCurveFeature(features1);
section1.AllowSelfIntersection(true);
NXOpen.SelectionIntentRule[] rules1 = new NXOpen.SelectionIntentRule[1];
rules1[0] = curveFeatureRule1;
NXOpen.Point3d helpPoint1 = new NXOpen.Point3d(0.0, 0.0, 0.0);
section1.AddToSection(rules1, null, null, null, helpPoint1, NXOpen.Section.Mode.Create, false);
NXOpen.Direction direction1;
direction1 = workPart.Directions.CreateDirection(sketch1, NXOpen.Sense.Forward, NXOpen.SmartObject.UpdateOption.WithinModeling);
extrudeBuilder1.Direction = direction1;
extrudeBuilder1.ParentFeatureInternal = false;
NXOpen.Features.Feature feature2;
feature2 = extrudeBuilder1.CommitFeature();
NXOpen.Expression expression8 = extrudeBuilder1.Limits.StartExtend.Value;
NXOpen.Expression expression9 = extrudeBuilder1.Limits.EndExtend.Value;
extrudeBuilder1.Destroy();
workPart.Expressions.Delete(expression7);
// ----------------------------------------------
// Menu: Tools->Journal->Stop Recording
// ----------------------------------------------
// ----------------------------------------------
// Menu: File->Export->IGES...
// ----------------------------------------------
NXOpen.IgesCreator igesCreator1;
igesCreator1 = theSession.DexManager.CreateIgesCreator();
igesCreator1.ExportModelData = true;
igesCreator1.ExportDrawings = true;
igesCreator1.MapTabCylToBSurf = true;
igesCreator1.BcurveTol = 0.0508;
igesCreator1.IdenticalPointResolution = 0.001;
igesCreator1.MaxThreeDMdlSpace = 10000.0;
igesCreator1.ObjectTypes.Curves = true;
igesCreator1.ObjectTypes.Surfaces = true;
igesCreator1.ObjectTypes.Annotations = true;
igesCreator1.ObjectTypes.Structures = true;
igesCreator1.ObjectTypes.Solids = true;
igesCreator1.SettingsFile = "C:\\Program Files\\Siemens\\NX 10.0\\iges\\igesexport.def";
igesCreator1.MaxLineThickness = 2.0;
igesCreator1.SysDefmaxThreeDMdlSpace = true;
igesCreator1.SysDefidenticalPointResolution = true;
igesCreator1.InputFile = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs";
igesCreator1.OutputFile = "J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs";
igesCreator1.FileSaveFlag = false;
igesCreator1.LayerMask = "1-256";
igesCreator1.DrawingList = "";
NXOpen.TaggedObject[] objects1 = new NXOpen.TaggedObject[0];
igesCreator1.SetDrawingArray(objects1);
NXOpen.NXObject nXObject20;
nXObject20 = igesCreator1.Commit();
igesCreator1.Destroy();
while (!System.IO.File.Exists("J:\\ME 578 Systems\\Midterm\\MidtermProject\\GoldBeam.igs"))
{
System.Threading.Thread.Sleep(10);
}
}
