/// <summary>
/// </summary>
/// <param name="cproc"/>
/// <param name="hb"/>
/// <param name="handled"/>
/// <param name="prevReturnValue"/>
/// <returns/>
public string[] GET_LOADABLE_CHAMBERS1(Mozart.SeePlan.Simulation.AoChamberProc2 cproc, Mozart.SeePlan.Simulation.IHandlingBatch hb, ref bool handled, string[] prevReturnValue)
{
var eqp = cproc.Parent as FabAoEquipment;
var lot = hb.ToFabLot();
//if (eqp.EqpID == "THCVD300" && lot != null && lot.LotID == "TH011661N0H")
// Console.WriteLine("B");
var info = eqp.EqpDispatchInfo;
//var loadableList = eqp.GetLoadableSubEqps(lot, false);
var loadableList = eqp.GetLoadableSubEqps(lot);
int count = loadableList == null ? 0 : loadableList.Count;
string[] arr = new string[count];
//loadable sub eqp별 EqpDispatchInfo 설정
if (loadableList != null)
{
for (int i = 0; i < count; i++)
{
var subEqp = loadableList[i];
arr[i] = subEqp.SubEqpID;
subEqp.EqpDispatchInfo = info;
}
}
eqp.EndDispatch_ParallelChamber();
return(arr);
}
/// <summary>
/// </summary>
/// <param name="aeqp"/>
/// <param name="hb"/>
/// <param name="state">SETUP/BUSY/IDLERUN/IDLE/WAIT_SETUP(PM/DOUWN 호출 안됨)</param>
/// <param name="handled"/>
public void LOADING_STATE_CHANGED0(Mozart.SeePlan.Simulation.AoEquipment aeqp, Mozart.SeePlan.Simulation.IHandlingBatch hb, Mozart.SeePlan.Simulation.LoadingStates state, ref bool handled)
{
var eqp = aeqp.ToFabAoEquipment();
var now = eqp.NowDT;
if (eqp.IsParallelChamber)
{
return;
}
if (ModelContext.Current.EndTime == now)
{
return;
}
//PM/Down 이벤트 예외사항 처리
if (SimHelper.IgnoreStateChange(eqp, state))
{
return;
}
var lot = hb.ToFabLot();
if (state == LoadingStates.SETUP || state == LoadingStates.BUSY)
{
SetCurrentMask(eqp, lot);
}
eqp.OnStateChanged(state, lot);
}
/// <summary>
/// </summary>
/// <param name="hb"/>
/// <param name="handled"/>
public void ON_TRANSFERED0(Mozart.SeePlan.Simulation.IHandlingBatch hb, ref bool handled)
{
FabLot lot = hb.ToFabLot();
FabPlanInfo plan = lot.CurrentFabPlan;
plan.TransferEndTime = AoFactory.Current.NowDT;
}
/// <summary>
/// </summary>
/// <param name="da"/>
/// <param name="hb"/>
/// <param name="destCount"/>
/// <param name="handled"/>
public void ON_NOT_FOUND_DESTINATION0(Mozart.SeePlan.Simulation.DispatchingAgent da, Mozart.SeePlan.Simulation.IHandlingBatch hb, int destCount, ref bool handled)
{
FabLot lot = hb.ToFabLot();
//TODO:
if (lot.CurrentFabStep.StdStep.IsMandatory)
{
ErrHist.WriteIf(string.Format("{0}/{1}/{2}", "NotFoundArrange", lot.CurrentFabStep.StepID, lot.CurrentProductID),
ErrCategory.SIMULATION,
ErrLevel.INFO,
lot.CurrentFactoryID,
lot.CurrentShopID,
lot.LotID,
lot.CurrentProductID,
lot.CurrentProductVersion ?? lot.Wip.ProductVersion,
lot.CurrentProcessID,
Constants.NULL_ID,
lot.CurrentStepID,
"ON NOT FOUND DESTINATION0",
string.Format("Check Arrange → LOT_ID:{0}", lot.ToString())
);
return;
}
da.Factory.AddToBucketer(hb);
}
/// <summary>
/// </summary>
/// <param name="hb"/>
/// <param name="ao"/>
/// <param name="now"/>
/// <param name="handled"/>
public void ON_START_TASK0(Mozart.SeePlan.Simulation.IHandlingBatch hb, Mozart.Simulation.Engine.ActiveObject ao, DateTime now, ref bool handled)
{
FabLot lot = hb.ToFabLot();
hb.Apply((x, y) => LoadHelper.OnStartTask(x as FabLot));
InFlowMaster.ChangeWipLocation(hb, EventType.TrackIn);
if (ao is AoEquipment)
{
FabAoEquipment eqp = ao as FabAoEquipment;
MaskMaster.StartTask(lot, eqp);
JigMaster.StartTask(lot, eqp);
//TODO : 설비의 Property로 작성필요 (LastPlan의 Plan을 보고)
if (lot.CurrentFabPlan.CurrentRecipeTime != null)
{
eqp.IsEqpRecipeRun = true;
}
else
{
eqp.IsEqpRecipeRun = false;
}
}
OutCollector.Write_Rtd_LotUpkTracking(lot);
}
/// <summary>
/// </summary>
/// <param name="aeqp"/>
/// <param name="hb"/>
/// <param name="handled"/>
/// <param name="prevReturnValue"/>
/// <returns/>
public DateTime FIX_START_TIME0(Mozart.SeePlan.Simulation.AoEquipment aeqp, Mozart.SeePlan.Simulation.IHandlingBatch hb, ref bool handled, DateTime prevReturnValue)
{
FabLot lot = hb.ToFabLot();
var now = aeqp.NowDT;
var trackInTime = lot.Wip.LastTrackInTime;
//한개의 RunWip만 설비에 투입가능하도록 처리(LOCATE_FOR_RUN0)하여 조정 필요없음.
////RunWip 수량을 고려하여 마지막 RunWip의 TrackInTime을 기준으로 이전 RunWip의 TrackInTime 조정
//var runList = (aeqp.Target as FabEqp).InitRunWips;
//if(runList != null)
//{
// //해당 Lot 삭제
// if (runList.Remove(lot) == false)
// Logger.MonitorInfo("[WARNING] mismatch run wip : LOT_ID={0}", lot.LotID);
// int count = runList.Count;
// if (runList != null && count > 0)
// {
// var prevlot = runList[count - 1];
// DateTime outTime = prevlot.Wip.LastTrackInTime;
// for (int i = count - 2; i >= 0; i--)
// {
// var currLot = runList[i];
// if (currLot.UnitQty <= 0)
// continue;
// FabStep wipStep = currLot.Wip.InitialStep as FabStep;
// float currTactTime = wipStep.GetTactTime(eqpID, currLot.CurrentProductID);
// DateTime availableTime = outTime.AddSeconds(-(currTactTime * currLot.UnitQty));
// DateTime tkTime = currLot.Wip.LastTrackInTime;
// outTime = LcdHelper.Min(tkTime, availableTime);
// }
// float tactTime = lot.CurrentFabStep.GetTactTime(eqpID, lot.CurrentProductID);
// outTime = outTime.AddSeconds(-(tactTime * lot.UnitQty));
// trackInTime = LcdHelper.Min(outTime, trackInTime);
// }
//}
//TODO : WriteErrorHist
if (trackInTime == DateTime.MinValue || trackInTime == DateTime.MaxValue)
{
trackInTime = aeqp.NowDT;
}
else if (trackInTime > now)
{
trackInTime = now;
}
return(trackInTime);
}
/// <summary>
/// </summary>
/// <param name="aeqp"/>
/// <param name="loadableChambers"/>
/// <param name="hb"/>
/// <param name="handled"/>
/// <param name="prevReturnValue"/>
/// <returns/>
public ISet <string> GET_NEED_SETUP_CHAMBERS0(Mozart.SeePlan.Simulation.AoEquipment aeqp, Mozart.SeePlan.Simulation.ChamberInfo[] loadableChambers, Mozart.SeePlan.Simulation.IHandlingBatch hb, ref bool handled, ISet <string> prevReturnValue)
{
FabLot lot = hb.ToFabLot();
FabEqp eqp = aeqp.Target as FabEqp;
List <FabSubEqp> list = ChamberMaster.GetSubEqps(eqp, loadableChambers);
return(ChamberMaster.GetNeedSetupChamberIDs(list, lot));
}
//public Step GET_NEXT_STEP1(Mozart.SeePlan.Simulation.ILot lot, Mozart.SeePlan.DataModel.LoadInfo loadInfo, Mozart.SeePlan.DataModel.Step step, DateTime now, ref bool handled, Mozart.SeePlan.DataModel.Step prevReturnValue)
//{
// FabPlanInfo plan = loadInfo as FabPlanInfo;
// FabProduct prod = plan.Product;
// FabLot mlot = lot as FabLot;
// #region PartChange
// if (prod.HasNextInterBom)
// {
// FabInterBom bom;
// prod.TryGetNextInterRoute(step as FabStep, out bom);
// if (bom != null)
// {
// plan.InterBom = bom;
// mlot.Product = bom.ChangeProduct;
// }
// }
// #endregion
// if (plan.InterBom != null)
// return plan.InterBom.ChangeStep;
// return step.GetDefaultNextStep();
//}
/// <summary>
/// </summary>
/// <param name="hb"/>
/// <param name="handled"/>
public void ON_DONE0(Mozart.SeePlan.Simulation.IHandlingBatch hb, ref bool handled)
{
FabLot lot = hb.ToFabLot();
InFlowMaster.OnDoneWipLocation(hb);
if (SimHelper.IsTftRunning)
{
InOutProfileMaster.AddOut(lot, AoFactory.Current.NowDT);
}
}
/// <summary>
/// </summary>
/// <param name="hb"/>
/// <param name="ao"/>
/// <param name="now"/>
/// <param name="handled"/>
public void ON_END_TASK0(Mozart.SeePlan.Simulation.IHandlingBatch hb, Mozart.Simulation.Engine.ActiveObject ao, DateTime now, ref bool handled)
{
FabLot lot = hb.ToFabLot();
hb.Apply((x, y) => LoadHelper.OnEndTask(x as FabLot));
if (ao is AoEquipment)
{
FabAoEquipment aeqp = ao as FabAoEquipment;
MaskMaster.EndTask(lot, aeqp);
JigMaster.EndTask(lot, aeqp);
}
}
/// <summary>
/// </summary>
/// <param name="factory"/>
/// <param name="hb"/>
/// <param name="handled"/>
public void LOCATE_FOR_DISPATCH1(Mozart.SeePlan.Simulation.AoFactory factory, Mozart.SeePlan.Simulation.IHandlingBatch hb, ref bool handled)
{
FabLot lot = hb.ToFabLot();
if (CheckSimulationRunType(lot) == false)
{
return;
}
if (hb.IsFinished)
{
factory.Router.AddInitial((Entity)hb, hb.IsFinished);
}
else
{
//InPortWip 처리
if (InitInPortWip(factory, hb))
{
return;
}
var router = EntityControl.Instance;
string dispatchKey = router.GetLotDispatchingKey(hb);
DispatchingAgent da = factory.GetDispatchingAgent(dispatchKey);
if (da == null)
{
if (factory.DispatchingAgents.Count > 0)
{
ModelContext.Current.ErrorLister.Write("Entity/WipInit/LocateForDispatch", Mozart.DataActions.ErrorType.Warning, Strings.CAT_SIM_SECONDRESOURCE,
string.Format(Strings.WARN_INVALID_IMPLEMENTATION, "Entity/WipInit/LocateForDispatch"));
da = factory.DispatchingAgents.FirstOrDefault().Value;
}
else
{
throw new InvalidOperationException(Strings.EXCEPTION_NO_REGISTERED_DISPATCHINGAGENT);
}
}
InFlowMaster.ChangeWipLocation(hb, EventType.StartTOWait);
da.Take(hb);
}
}
/// <summary>
/// </summary>
/// <param name="aeqp"/>
/// <param name="hb"/>
/// <param name="state">WaitSetup/StartSetup/EndSetup/FirstLoading/LastLoading/FirstUnloading/LastUnloading</param>
/// <param name="handled"/>
public void PROCESS_STATE_CHANGED0(Mozart.SeePlan.Simulation.AoEquipment aeqp, Mozart.SeePlan.Simulation.IHandlingBatch hb, Mozart.SeePlan.Simulation.ProcessStates state, ref bool handled)
{
FabAoEquipment eqp = aeqp.ToFabAoEquipment();
FabLot lot = hb.ToFabLot();
var now = aeqp.NowDT;
if (eqp.EqpID == "THCVD300")
{
Console.WriteLine();
}
//Setup이 있을 경우 FirstLoading이 없음.
if (state == ProcessStates.FirstLoading)
{
DispatchLogHelper.WriteDispatchLog_ParallelChamber(eqp, lot);
eqp.LastLoadingTime = now;
//if (eqp.LastLoadingTime >= eqp.LastIdleStartTime)
// eqp.LastIdleStartTime = DateTime.MinValue;
//eqp.LastIdleRunStartTime = DateTime.MinValue;
eqp.LoadCount++;
}
//else if (state == ProcessStates.LastLoading)
//{
// eqp.LastIdleRunStartTime = now;
//}
//else if (state == ProcessStates.LastUnloading)
//{
// eqp.LastIdleStartTime = now;
//}
else if (state == ProcessStates.StartSetup)
{
DispatchLogHelper.WriteDispatchLog_ParallelChamber(eqp, lot);
}
else if (state == ProcessStates.EndSetup)
{
eqp.LoadCount = 1;
eqp.SetupCount++;
//eqp.LastIdleStartTime = DateTime.MinValue;
//eqp.LastIdleRunStartTime = DateTime.MinValue;
}
}
/// <summary>
/// </summary>
/// <param name="da"/>
/// <param name="hb"/>
/// <param name="handled"/>
/// <param name="prevReturnValue"/>
/// <returns/>
public Time GET_HOLD_TIME0(Mozart.SeePlan.Simulation.DispatchingAgent da, Mozart.SeePlan.Simulation.IHandlingBatch hb, ref bool handled, Mozart.Simulation.Engine.Time prevReturnValue)
{
Time t = Time.Zero;
FabLot lot = hb.ToFabLot();
FabWipInfo wip = lot.Wip;
//FabPlanInfo plan = lot.CurrentFabPlan;
if (lot.IsInitHold)
{
t = wip.AvailableTime - da.NowDT;
lot.HoldStartTime = da.NowDT;
lot.HoldTime = t;
lot.IsInitHold = false; // Hold → ExitHold → IsHold 이므로 false로 설정해야됨. 바꿔주지 않을 경우 계속 Hold됨.
}
return(t);
}
/// <summary>
/// </summary>
/// <param name="da"/>
/// <param name="hb"/>
/// <param name="handled"/>
/// <param name="prevReturnValue"/>
/// <returns/>
public bool IS_BUCKET_PROCESSING0(Mozart.SeePlan.Simulation.DispatchingAgent da, Mozart.SeePlan.Simulation.IHandlingBatch hb, ref bool handled, bool prevReturnValue)
{
FabLot lot = hb.ToFabLot();
if (lot.LotID == "TH930454N01")
{
Console.WriteLine();
}
FabStep step = hb.CurrentStep as FabStep;
if (step.IsMandatoryStep == false)
{
return(true);
}
//if(step.StdStep != null && step.StdStep.)
// return true;
return(false);
}
/// <summary>
/// </summary>
/// <param name="hb"/>
/// <param name="now"/>
/// <param name="handled"/>
/// <param name="prevReturnValue"/>
/// <returns/>
public IHandlingBatch[] STEP_CHANGE0(Mozart.SeePlan.Simulation.IHandlingBatch hb, DateTime now, ref bool handled, Mozart.SeePlan.Simulation.IHandlingBatch[] prevReturnValue)
{
FabLot lot = hb.ToFabLot();
FabPlanInfo plan = lot.CurrentFabPlan;
/*
* StepChange
*/
ILot[] lots = hb.StepChange(now);
//설비의 OutPort에서 Lot을 모으는 InterceptMove를 사용할 경우 해당 위치에서 별도 집계 필요함.
InFlowMaster.ChangeWipLocation(hb, EventType.TrackOut);
//FabPlanInfo prev = lot.PreviousFabPlan;
////InLineMap 다음StepSkip
//if (prev.IsLoaded && prev.FabStep.StdStep.IsBaseEqp(prev.ResID))
//{
// plan = lot.CurrentFabPlan;
// plan.TransferStartTime = now;
// plan.TransferEndTime = now;
// plan.EqpInEndTime = now;
// plan.EqpInStartTime = now;
// plan.Start(now, null);
// plan.End(now, null);
// lots = hb.StepChange(now);
//}
QTimeMaster.StepChange(lots, now);
return(lots);
}
/// <summary>
/// </summary>
/// <param name="factory"/>
/// <param name="hb"/>
/// <param name="handled"/>
/// <param name="prevReturnValue"/>
/// <returns/>
public bool LOCATE_FOR_OTHERS0(Mozart.SeePlan.Simulation.AoFactory factory, Mozart.SeePlan.Simulation.IHandlingBatch hb, ref bool handled, bool prevReturnValue)
{
FabLot lot = hb.ToFabLot();
if (lot.LotID == "TH9A1308N3B")
{
Console.WriteLine();
}
if (lot.IsHold || lot.IsMove)
{
var router = EntityControl.Instance;
string dispatchKey = router.GetLotDispatchingKey(hb);
DispatchingAgent da = factory.GetDispatchingAgent(dispatchKey);
lot.IsInitHold = true;
da.Take(hb);
return(true);
}
return(false);
}
/// <summary>
/// </summary>
/// <param name="dispatchingAgent"/>
/// <param name="hb"/>
/// <param name="handled"/>
public void ON_HOLD_EXIT0(Mozart.SeePlan.Simulation.DispatchingAgent dispatchingAgent, Mozart.SeePlan.Simulation.IHandlingBatch hb, ref bool handled)
{
FabLot lot = hb.ToFabLot();
lot.HoldTime = 0;
}
