OnRender
(
DrawingContext oDrawingContext,
Double dAdjustedNearValue,
Double dAdjustedNearOffset,
Double dAdjustedFarValue,
Double dAdjustedFarOffset
)
{
Debug.Assert(oDrawingContext != null);
Debug.Assert(dAdjustedNearOffset >= 0);
Debug.Assert(dAdjustedFarOffset >= 0);
AssertValid();
Rect oClientRectangle =
new Rect(0, 0, this.ActualWidth, this.ActualHeight);
Double dAxisLength = m_bIsXAxis ? this.ActualWidth : this.ActualHeight;
if (dAxisLength == 0)
{
return;
}
// If the pen is not one pixel wide, gridlines drawn on a large-font
// machine vary in width, depending on their position.
Pen oPen = WpfGraphicsUtil.CreateOnePixelPen(this,
SystemColors.WindowTextBrush);
WpfGraphicsUtil.FreezeIfFreezable(oPen);
DrawBackground(oDrawingContext, oClientRectangle, dAdjustedNearOffset,
dAdjustedFarOffset);
DrawAxisLine(oDrawingContext, oClientRectangle, oPen);
if (dAdjustedFarValue == dAdjustedNearValue)
{
// This is a degenerate case. Draw just one gridline.
DrawMajorGridlineAndValue(oDrawingContext, oClientRectangle, oPen,
dAdjustedNearValue, dAdjustedNearOffset, "N");
return;
}
if (dAdjustedNearOffset + dAdjustedFarOffset > dAxisLength)
{
return;
}
DrawLabel(oDrawingContext, oClientRectangle);
Double [] adMajorGridlineValues;
Int32 iDecimalPlacesToShow;
ChartUtil.GetAxisGridlineValues(dAdjustedNearValue, dAdjustedFarValue,
out adMajorGridlineValues, out iDecimalPlacesToShow);
String sFormatSpecifier = GetFormatSpecifier(adMajorGridlineValues,
iDecimalPlacesToShow);
// Use the point-slope equation of a line to get the major gridline
// coordinates.
Double dX1 = dAdjustedNearValue;
Double dY1 = dAdjustedNearOffset;
Double dX2 = dAdjustedFarValue;
Double dY2 = dAxisLength - dAdjustedFarOffset;
Debug.Assert(dX1 != dX2);
Double dM = (dY1 - dY2) / (dX1 - dX2);
Double dPreviousMajorGridlineOffset = Double.NaN;
foreach (Double dMajorGridlineValue in adMajorGridlineValues)
{
// Compute the major gridline's offset, then draw it.
Double dMajorGridlineOffset =
dY1 + dM * (dMajorGridlineValue - dX1);
DrawMajorGridlineAndValue(oDrawingContext, oClientRectangle, oPen,
dMajorGridlineValue, dMajorGridlineOffset, sFormatSpecifier);
if (!Double.IsNaN(dPreviousMajorGridlineOffset))
{
// Draw minor gridlines between the major gridlines.
DrawMinorGridlines(oDrawingContext, oClientRectangle, oPen,
dMajorGridlineOffset, dPreviousMajorGridlineOffset);
}
dPreviousMajorGridlineOffset = dMajorGridlineOffset;
}
}
GetImageSynchronousHttp
(
Uri uri
)
{
Debug.Assert(uri != null);
Debug.Assert(uri.Scheme == Uri.UriSchemeHttp ||
uri.Scheme == Uri.UriSchemeHttps);
AssertValid();
// Talk about inefficient...
//
// The following code uses HttpWebRequest to synchronously download the
// image into a List<Byte>, then passes that List as a MemoryStream to
// BitmapImage.StreamSource. It works, but it involves way too much
// Byte copying. There has to be a better way to do this, but so far I
// haven't found one.
//
// In the following post...
//
// http://stackoverflow.com/questions/426645/
// how-to-render-an-image-in-a-background-wpf-process
//
// ...the poster suggests feeding the WebResponse.GetResponseStream()
// indirectly to BitmapImage.StreamSource. This sometimes works but
// sometimes doesn't, which you can tell by checking
// BitmapImage.IsDownloading at the end of his code. It is true
// sometimes, indicating that the Bitmap is still downloading.
HttpWebRequest oHttpWebRequest = (HttpWebRequest)WebRequest.Create(uri);
oHttpWebRequest.Timeout = HttpWebRequestTimeoutMs;
oHttpWebRequest.CachePolicy = new RequestCachePolicy(
RequestCacheLevel.CacheIfAvailable);
WebResponse oWebResponse = oHttpWebRequest.GetResponse();
BinaryReader oBinaryReader = new BinaryReader(
oWebResponse.GetResponseStream());
List <Byte> oResponseBytes = new List <Byte>();
while (true)
{
Byte [] abtSomeResponseBytes = oBinaryReader.ReadBytes(8192);
if (abtSomeResponseBytes.Length == 0)
{
break;
}
oResponseBytes.AddRange(abtSomeResponseBytes);
}
Byte [] abtAllResponseBytes = oResponseBytes.ToArray();
oResponseBytes = null;
MemoryStream oMemoryStream = new MemoryStream(abtAllResponseBytes,
false);
BitmapImage oBitmapImage = new BitmapImage();
oBitmapImage.BeginInit();
oBitmapImage.StreamSource = oMemoryStream;
oBitmapImage.EndInit();
WpfGraphicsUtil.FreezeIfFreezable(oBitmapImage);
return(oBitmapImage);
}
OnRender
(
DrawingContext drawingContext
)
{
AssertValid();
Double dAxisLength = m_bIsXAxis ? this.ActualWidth : this.ActualHeight;
if (dAxisLength == 0)
{
return;
}
Double dNearValue, dNearOffset, dFarValue, dFarOffset;
if (m_bIsXAxis)
{
dNearValue = m_dNearValue;
dNearOffset = m_dNearOffset;
dFarValue = m_dFarValue;
dFarOffset = m_dFarOffset;
}
else
{
// The y-axis has to be flipped, so that increasing values run
// from bottom to top.
dNearValue = m_dFarValue;
dNearOffset = m_dFarOffset;
dFarValue = m_dNearValue;
dFarOffset = m_dNearOffset;
}
// Figure out where the offsets fall after being transformed.
Double dAdjustedNearOffset = WpfGraphicsUtil.TransformLength(
dNearOffset, m_oDockedControlRenderTransform, m_bIsXAxis);
Double dFarX = dAxisLength - dFarOffset;
Double dAdjustedFarX = WpfGraphicsUtil.TransformLength(
dFarX, m_oDockedControlRenderTransform, m_bIsXAxis);
if (dAdjustedFarX == dAdjustedNearOffset)
{
DrawOffsetBackground(drawingContext, new Rect(0, 0,
this.ActualWidth, this.ActualHeight));
return;
}
Double dAdjustedNearValue = dNearValue;
Double dAdjustedFarValue = dFarValue;
// Use the point-slope equation of a line to map adjusted offsets to
// values, if necessary.
Double dX1 = dAdjustedNearOffset;
Double dY1 = dNearValue;
Double dX2 = dAdjustedFarX;
Double dY2 = dFarValue;
Debug.Assert(dX1 != dX2);
Double dM = (dY1 - dY2) / (dX1 - dX2);
if (dAdjustedNearOffset < 0)
{
// Find the value at the near end of the axis.
dAdjustedNearValue = dY1 + dM * (0 - dX1);
dAdjustedNearOffset = 0;
}
Double dAdjustedFarOffset;
if (dAdjustedFarX <= dAxisLength)
{
dAdjustedFarOffset = dAxisLength - dAdjustedFarX;
}
else
{
// Find the value at the far end of the axis.
dAdjustedFarValue = dY1 + dM * (dAxisLength - dX1);
dAdjustedFarOffset = 0;
}
if (m_bIsXAxis)
{
OnRender(drawingContext, dAdjustedNearValue, dAdjustedNearOffset,
dAdjustedFarValue, dAdjustedFarOffset);
}
else
{
// The y-axis is flipped.
OnRender(drawingContext, dAdjustedFarValue, dAdjustedFarOffset,
dAdjustedNearValue, dAdjustedNearOffset);
}
}
GetImageSynchronous
(
String uriString
)
{
Debug.Assert(!String.IsNullOrEmpty(uriString));
AssertValid();
const Int32 ErrorImageWidthAndHeight = 52;
Uri oUri;
if (Uri.TryCreate(uriString, UriKind.Absolute, out oUri))
{
if (oUri.Scheme == Uri.UriSchemeHttp ||
oUri.Scheme == Uri.UriSchemeHttps)
{
try
{
return(GetImageSynchronousHttp(oUri));
}
catch (WebException)
{
// (These empty catch blocks cause an error image to be
// returned.)
}
catch (ArgumentException)
{
/*
* Attempting to download a possibly corrupt image from this
* Twitter URL:
*
* http://a1.twimg.com/profile_images/1112245377/
* Photo_on_2010-08-27_at_18.51_normal.jpg
*
* raised the following exception:
*
* [ArgumentException]: An invalid character was found in text
* content.
* at System.Windows.Media.Imaging.BitmapFrameDecode.
* get_ColorContexts()
* at System.Windows.Media.Imaging.BitmapImage.
* FinalizeCreation()
* at System.Windows.Media.Imaging.BitmapImage.EndInit()
*/
}
catch (IOException)
{
/*
* Attempting to download a possibly corrupt image from this
* Twitter URL:
*
* http://a2.twimg.com/profile_images/1126755034/
* 8FjbVD_normal.gif
*
* raised the following exception:
*
* [IOException]: Cannot read from the stream.
* [COMException]: Exception from HRESULT: 0x88982F72
* at System.Windows.Media.Imaging.BitmapDecoder.
* SetupDecoderFromUriOrStream(Uri uri, Stream stream,
* BitmapCacheOption cacheOption, Guid& clsId, Boolean&
* isOriginalWritable, Stream& uriStream,
* UnmanagedMemoryStream& unmanagedMemoryStream,
* SafeFileHandle& safeFilehandle)
* ...
*/
}
catch (NotSupportedException)
{
/*
* Attempting to download a possibly corrupt image from a
* Twitter URL (didn't record the URL) raised the following
* exception:
*
* [NotSupportedException]: No imaging component suitable
* to complete this operation was found.
*/
}
}
else if (oUri.Scheme == Uri.UriSchemeFile)
{
try
{
BitmapImage oBitmapImage = new BitmapImage(oUri);
WpfGraphicsUtil.FreezeIfFreezable(oBitmapImage);
return(oBitmapImage);
}
catch (IOException)
{
}
catch (NotSupportedException)
{
// Invalid image file.
}
catch (UnauthorizedAccessException)
{
// The URI is actually a folder, for example.
}
}
}
if (m_oCachedErrorImage == null)
{
m_oCachedErrorImage = CreateErrorImage(ErrorImageWidthAndHeight);
}
return(m_oCachedErrorImage);
}
