public GuiWidget AddPluginWidget(SectionWidget sectionWidget)
{
// Section not active due to constraints
if (sectionWidget == null)
{
return(null);
}
theme.ApplyBoxStyle(sectionWidget);
sectionWidget.ContentPanel.Padding = new BorderDouble(10, 10, 10, 0);
column.AddChild(sectionWidget);
// Disable borders on all SettingsRow children in control panels
foreach (var settingsRow in sectionWidget.ContentPanel.Descendants <SettingsRow>())
{
settingsRow.BorderColor = Color.Transparent;
}
// Return the panel widget rather than the source sectionWidget
return(sectionWidget.ContentPanel);
}
public PrinterCalibrationWizard(PrinterConfig printer, ThemeConfig theme)
{
var stages = new List <ISetupWizard>()
{
new ZCalibrationWizard(printer),
new PrintLevelingWizard(printer),
new LoadFilamentWizard(printer, extruderIndex: 0, showAlreadyLoadedButton: true),
new LoadFilamentWizard(printer, extruderIndex: 1, showAlreadyLoadedButton: true),
new XyCalibrationWizard(printer, 1)
};
this.Stages = stages;
this.printer = printer;
this.HomePageGenerator = () =>
{
var homePage = new WizardSummaryPage()
{
HeaderText = "Printer Setup & Calibration".Localize()
};
var contentRow = homePage.ContentRow;
if (!this.ReturnedToHomePage)
{
contentRow.AddChild(
new WrappedTextWidget(
@"Select the calibration task on the left to continue".Replace("\r\n", "\n"),
pointSize: theme.DefaultFontSize,
textColor: theme.TextColor));
}
contentRow.BackgroundColor = Color.Transparent;
foreach (var stage in this.Stages.Where(s => s.Enabled && s.Visible))
{
GuiWidget rightWidget = null;
var widget = new GuiWidget();
if (stage is ZCalibrationWizard probeWizard)
{
var column = CreateColumn(theme);
column.FlowDirection = FlowDirection.LeftToRight;
var offset = printer.Settings.GetValue <Vector3>(SettingsKey.probe_offset);
column.AddChild(
new ValueTag(
"Z Offset".Localize(),
offset.Z.ToString("0.###"),
new BorderDouble(12, 5, 2, 5),
5,
11)
{
Margin = new BorderDouble(bottom: 4),
MinimumSize = new Vector2(125, 0)
});
widget = column;
}
if (stage is PrintLevelingWizard levelingWizard)
{
PrintLevelingData levelingData = printer.Settings.Helpers.PrintLevelingData;
// Always show leveling option if printer does not have hardware leveling
if (!printer.Settings.GetValue <bool>(SettingsKey.has_hardware_leveling))
{
var positions = levelingData.SampledPositions;
var column = CreateColumn(theme);
column.AddChild(
new ValueTag(
"Leveling Solution".Localize(),
printer.Settings.GetValue(SettingsKey.print_leveling_solution),
new BorderDouble(12, 5, 2, 5),
5,
11)
{
Margin = new BorderDouble(bottom: 4),
MinimumSize = new Vector2(125, 0)
});
var row = new FlowLayoutWidget()
{
VAnchor = VAnchor.Fit,
HAnchor = HAnchor.Fit
};
// Only show Edit button if data initialized
if (levelingData?.SampledPositions.Count() > 0)
{
var editButton = new IconButton(AggContext.StaticData.LoadIcon("icon_edit.png", 16, 16, theme.InvertIcons), theme)
{
Name = "Edit Leveling Data Button",
ToolTipText = "Edit Leveling Data".Localize(),
};
editButton.Click += (s, e) =>
{
DialogWindow.Show(new EditLevelingSettingsPage(printer, theme));
};
row.AddChild(editButton);
}
// only show the switch if leveling can be turned off (it can't if it is required).
if (!printer.Settings.GetValue <bool>(SettingsKey.print_leveling_required_to_print))
{
// put in the switch
printLevelingSwitch = new RoundedToggleSwitch(theme)
{
VAnchor = VAnchor.Center,
Margin = new BorderDouble(theme.DefaultContainerPadding, 0),
Checked = printer.Settings.GetValue <bool>(SettingsKey.print_leveling_enabled),
ToolTipText = "Enable Software Leveling".Localize()
};
printLevelingSwitch.CheckedStateChanged += (sender, e) =>
{
printer.Settings.Helpers.DoPrintLeveling(printLevelingSwitch.Checked);
};
printLevelingSwitch.Closed += (s, e) =>
{
// Unregister listeners
printer.Settings.PrintLevelingEnabledChanged -= this.Settings_PrintLevelingEnabledChanged;
};
// TODO: Why is this listener conditional? If the leveling changes somehow, shouldn't we be updated the UI to reflect that?
// Register listeners
printer.Settings.PrintLevelingEnabledChanged += this.Settings_PrintLevelingEnabledChanged;
row.AddChild(printLevelingSwitch);
}
rightWidget = row;
// Only visualize leveling data if initialized
if (levelingData?.SampledPositions.Count() > 0)
{
var probeWidget = new ProbePositionsWidget(printer, positions.Select(v => new Vector2(v)).ToList(), theme)
{
HAnchor = HAnchor.Absolute,
VAnchor = VAnchor.Absolute,
Height = 200,
Width = 200,
RenderLevelingData = true,
RenderProbePath = false,
SimplePoints = true,
};
column.AddChild(probeWidget);
}
widget = column;
}
}
if (stage is XyCalibrationWizard xyWizard)
{
var column = CreateColumn(theme);
column.FlowDirection = FlowDirection.LeftToRight;
var hotendOffset = printer.Settings.Helpers.ExtruderOffset(1);
var tool2Column = new FlowLayoutWidget(FlowDirection.TopToBottom);
column.AddChild(tool2Column);
tool2Column.AddChild(
new TextWidget("Tool".Localize() + " 2", pointSize: theme.DefaultFontSize, textColor: theme.TextColor)
{
Margin = new BorderDouble(bottom: 4)
});
tool2Column.AddChild(
new ValueTag(
"X Offset".Localize(),
hotendOffset.X.ToString("0.###"),
new BorderDouble(12, 5, 2, 5),
5,
11)
{
Margin = new BorderDouble(bottom: 4),
MinimumSize = new Vector2(125, 0)
});
tool2Column.AddChild(
new ValueTag(
"Y Offset".Localize(),
hotendOffset.Y.ToString("0.###"),
new BorderDouble(12, 5, 2, 5),
5,
11)
{
MinimumSize = new Vector2(125, 0)
});
widget = column;
}
if (stage.SetupRequired)
{
var column = CreateColumn(theme);
column.AddChild(new TextWidget("Setup Required".Localize(), pointSize: theme.DefaultFontSize, textColor: theme.TextColor));
widget = column;
}
else if (stage is LoadFilamentWizard filamentWizard)
{
widget.Margin = new BorderDouble(left: theme.DefaultContainerPadding);
}
var section = new SectionWidget(stage.Title, widget, theme, rightAlignedContent: rightWidget, expandingContent: false);
theme.ApplyBoxStyle(section);
section.Margin = section.Margin.Clone(left: 0);
section.ShowExpansionIcon = false;
if (stage.SetupRequired)
{
section.BackgroundColor = Color.Red.WithAlpha(30);
}
contentRow.AddChild(section);
}
return(homePage);
};
}
public PrinterCalibrationWizard(PrinterConfig printer, ThemeConfig theme)
{
var stages = new List <ISetupWizard>()
{
new ZCalibrationWizard(printer),
new PrintLevelingWizard(printer),
new LoadFilamentWizard(printer, extruderIndex: 0, showAlreadyLoadedButton: true),
new LoadFilamentWizard(printer, extruderIndex: 1, showAlreadyLoadedButton: true),
new XyCalibrationWizard(printer, 1)
};
this.Stages = stages;
this.printer = printer;
this.HomePageGenerator = () =>
{
var homePage = new WizardSummaryPage()
{
HeaderText = "Printer Setup & Calibration".Localize()
};
var contentRow = homePage.ContentRow;
if (!ReturnedToHomePage)
{
if (printer.Connection.IsConnected)
{
contentRow.AddChild(
new WrappedTextWidget(
@"Select the calibration task to continue".Replace("\r\n", "\n"),
pointSize: theme.DefaultFontSize,
textColor: theme.TextColor));
}
else
{
contentRow.AddChild(
new WrappedTextWidget(
@"Connect the printer to complete the calibration tasks.".Replace("\r\n", "\n"),
pointSize: theme.DefaultFontSize,
textColor: theme.TextColor));
}
}
contentRow.BackgroundColor = Color.Transparent;
foreach (var stage in this.Stages.Where(s => s.Visible))
{
GuiWidget rightWidget = null;
var widget = new GuiWidget();
if (stage is ZCalibrationWizard probeWizard)
{
var column = CreateColumn(theme);
column.FlowDirection = FlowDirection.LeftToRight;
var offset = printer.Settings.GetValue <Vector3>(SettingsKey.probe_offset);
column.AddChild(
new ValueTag(
"Z Offset".Localize(),
offset.Z.ToString("0.###"),
new BorderDouble(12, 5, 2, 5),
5,
11)
{
Margin = new BorderDouble(bottom: 4),
MinimumSize = new Vector2(125, 0)
});
column.AddChild(new HorizontalSpacer());
AddRunStageButton("Run Z Calibration".Localize(), theme, stage, column);
widget = column;
}
if (stage is LoadFilamentWizard loadWizard)
{
var column = CreateColumn(theme);
column.FlowDirection = FlowDirection.LeftToRight;
var lastRow = new FlowLayoutWidget()
{
HAnchor = HAnchor.Stretch
};
column.AddChild(lastRow);
lastRow.AddChild(new HorizontalSpacer());
AddRunStageButton("Load Filament".Localize(), theme, stage, lastRow).Margin = new BorderDouble(10);
widget = column;
}
if (stage is PrintLevelingWizard levelingWizard)
{
PrintLevelingData levelingData = printer.Settings.Helpers.PrintLevelingData;
var column = CreateColumn(theme);
var lastRow = new FlowLayoutWidget()
{
HAnchor = HAnchor.Stretch
};
if (levelingData != null &&
printer.Settings?.GetValue <bool>(SettingsKey.print_leveling_enabled) == true)
{
var positions = levelingData.SampledPositions;
var levelingSolution = printer.Settings.GetValue(SettingsKey.print_leveling_solution);
column.AddChild(
new ValueTag(
"Leveling Solution".Localize(),
levelingSolution,
new BorderDouble(12, 5, 2, 5),
5,
11)
{
Margin = new BorderDouble(bottom: 4),
MinimumSize = new Vector2(125, 0)
});
var editButton = new IconButton(StaticData.Instance.LoadIcon("icon_edit.png", 16, 16).SetToColor(theme.TextColor), theme)
{
Name = "Edit Leveling Data Button",
ToolTipText = "Edit Leveling Data".Localize(),
};
editButton.Click += (s, e) =>
{
DialogWindow.Show(new EditLevelingSettingsPage(printer, theme));
};
var row = new FlowLayoutWidget()
{
VAnchor = VAnchor.Fit,
HAnchor = HAnchor.Fit
};
row.AddChild(editButton);
// only show the switch if leveling can be turned off (it can't if it is required).
if (!printer.Settings.GetValue <bool>(SettingsKey.print_leveling_required_to_print))
{
// put in the switch
printLevelingSwitch = new RoundedToggleSwitch(theme)
{
VAnchor = VAnchor.Center,
Margin = new BorderDouble(theme.DefaultContainerPadding, 0),
Checked = printer.Settings.GetValue <bool>(SettingsKey.print_leveling_enabled),
ToolTipText = "Enable Software Leveling".Localize()
};
printLevelingSwitch.CheckedStateChanged += (sender, e) =>
{
printer.Settings.Helpers.DoPrintLeveling(printLevelingSwitch.Checked);
};
printLevelingSwitch.Closed += (s, e) =>
{
// Unregister listeners
printer.Settings.PrintLevelingEnabledChanged -= Settings_PrintLevelingEnabledChanged;
};
// TODO: Why is this listener conditional? If the leveling changes somehow, shouldn't we be updated the UI to reflect that?
// Register listeners
printer.Settings.PrintLevelingEnabledChanged += Settings_PrintLevelingEnabledChanged;
row.AddChild(printLevelingSwitch);
}
rightWidget = row;
column.AddChild(lastRow);
var probeWidget = new ProbePositionsWidget(printer, positions.Select(v => new Vector2(v)).ToList(), theme)
{
HAnchor = HAnchor.Absolute,
VAnchor = VAnchor.Absolute,
Height = 200,
Width = 200,
RenderLevelingData = true,
RenderProbePath = false,
SimplePoints = true,
};
lastRow.AddChild(probeWidget);
}
else
{
column.AddChild(lastRow);
if (!printer.Settings.GetValue <bool>(SettingsKey.print_leveling_required_to_print))
{
lastRow.AddChild(new WrappedTextWidget(
@"Print Leveling is an optional feature for this printer that can help improve print quality. If the bed is uneven or cannot be mechanically leveled.".Localize(),
pointSize: theme.DefaultFontSize,
textColor: theme.TextColor));
}
else if (printer.Settings.GetValue <bool>(SettingsKey.validate_leveling))
{
lastRow.AddChild(new WrappedTextWidget(
@"Print Leveling will run automatically at the start of each print.".Localize(),
pointSize: theme.DefaultFontSize,
textColor: theme.TextColor));
}
else
{
lastRow.AddChild(new HorizontalSpacer());
}
}
lastRow.AddChild(new HorizontalSpacer());
AddRunStageButton("Run Print Leveling".Localize(), theme, stage, lastRow);
widget = column;
}
if (stage is XyCalibrationWizard xyWizard)
{
var row = CreateColumn(theme);
row.FlowDirection = FlowDirection.LeftToRight;
var hotendOffset = printer.Settings.Helpers.ExtruderOffset(1);
var tool2Column = new FlowLayoutWidget(FlowDirection.TopToBottom);
row.AddChild(tool2Column);
tool2Column.AddChild(
new TextWidget("Tool".Localize() + " 2", pointSize: theme.DefaultFontSize, textColor: theme.TextColor)
{
Margin = new BorderDouble(bottom: 4)
});
tool2Column.AddChild(
new ValueTag(
"X Offset".Localize(),
hotendOffset.X.ToString("0.###"),
new BorderDouble(12, 5, 2, 5),
5,
11)
{
Margin = new BorderDouble(bottom: 4),
MinimumSize = new Vector2(125, 0)
});
tool2Column.AddChild(
new ValueTag(
"Y Offset".Localize(),
hotendOffset.Y.ToString("0.###"),
new BorderDouble(12, 5, 2, 5),
5,
11)
{
MinimumSize = new Vector2(125, 0)
});
row.AddChild(new HorizontalSpacer());
AddRunStageButton("Run Nozzle Alignment".Localize(), theme, stage, row);
widget = row;
}
if (stage is LoadFilamentWizard filamentWizard)
{
widget.Margin = new BorderDouble(left: theme.DefaultContainerPadding);
}
var sectionName = stage.Title;
if (stage.SetupRequired)
{
sectionName += " - " + "Required".Localize();
}
else if (stage.Completed)
{
sectionName += " - " + "Completed".Localize();
}
else
{
sectionName += " - " + "Optional".Localize();
}
var section = new SectionWidget(sectionName, widget, theme, rightAlignedContent: rightWidget, expandingContent: false);
theme.ApplyBoxStyle(section);
section.Margin = section.Margin.Clone(left: 0);
section.ShowExpansionIcon = false;
if (stage.SetupRequired)
{
section.BackgroundColor = Color.Red.WithAlpha(30);
}
contentRow.AddChild(section);
}
return(homePage);
};
}