public override void OnLoad(EventArgs args)
{
base.OnLoad(args);
// Replace with calibration template code
//await templatePrinter.PrintTemplate(verticalLayout: true);
//await templatePrinter.PrintTemplate(verticalLayout: false);
Task.Run(async() =>
{
var sketch1 = new GCodeSketch(printer)
{
Speed = (int)(printer.Settings.GetValue <double>(SettingsKey.first_layer_speed) * 60),
RetractLength = printer.Settings.GetValue <double>(SettingsKey.retract_length),
RetractSpeed = printer.Settings.GetValue <double>(SettingsKey.retract_speed) * 60,
RetractLift = printer.Settings.GetValue <double>(SettingsKey.retract_lift),
TravelSpeed = printer.Settings.GetValue <double>(SettingsKey.travel_speed) * 60,
};
var sketch2 = new GCodeSketch(printer)
{
Speed = sketch1.Speed,
RetractLength = sketch1.RetractLength,
RetractSpeed = sketch1.RetractSpeed,
RetractLift = sketch1.RetractLift,
TravelSpeed = sketch1.TravelSpeed
};
//gcodeSketch.WriteRaw("G92 E0");
sketch1.WriteRaw("; LAYER: 0");
sketch1.WriteRaw("; LAYER_HEIGHT: 0.2");
sketch1.SetTool("T0");
sketch2.SetTool("T1");
sketch1.PenUp();
templatePrinter.BuildTemplate(sketch1, sketch2, verticalLayout: true);
templatePrinter.BuildTemplate(sketch1, sketch2, verticalLayout: false);
string outputPath = Path.Combine(
ApplicationDataStorage.Instance.GCodeOutputPath,
$"nozzle-offset-template-combined.gcode");
File.WriteAllText(outputPath, sketch1.ToGCode() + "\r\n" + sketch2.ToGCode());
// HACK: update state needed to be set before calling StartPrint
printer.Connection.CommunicationState = CommunicationStates.PreparingToPrint;
await printer.Connection.StartPrint(outputPath, allowRecovery: false);
// Wait for print start
while (!printer.Connection.PrintIsActive)
{
Thread.Sleep(500);
}
// Wait for print finished
while (printer.Connection.PrintIsActive)
{
Thread.Sleep(500);
}
if (printer.Settings.GetValue <bool>(SettingsKey.z_homes_to_max))
{
printer.Connection.HomeAxis(PrinterConnection.Axis.Z);
}
else
{
printer.Connection.MoveRelative(PrinterConnection.Axis.Z, 20, printer.Settings.Helpers.ManualMovementSpeeds().Z);
printer.Connection.MoveAbsolute(PrinterConnection.Axis.Y,
printer.Bed.Bounds.Top,
printer.Settings.Helpers.ManualMovementSpeeds().Y);
}
});
}
public override void OnLoad(EventArgs args)
{
if (!this.HasBeenClosed)
{
this.NextButton.Enabled = true;
}
base.OnLoad(args);
// Replace with calibration template code
//await templatePrinter.PrintTemplate(verticalLayout: true);
//await templatePrinter.PrintTemplate(verticalLayout: false);
Task.Run(async() =>
{
var gcodeSketch = new GCodeSketch()
{
Speed = (int)(printer.Settings.GetValue <double>(SettingsKey.first_layer_speed) * 60)
};
//gcodeSketch.WriteRaw("G92 E0");
gcodeSketch.WriteRaw("; LAYER: 0");
gcodeSketch.WriteRaw("; LAYER_HEIGHT: 0.2");
templatePrinter.BuildTemplate(gcodeSketch, verticalLayout: true);
templatePrinter.BuildTemplate(gcodeSketch, verticalLayout: false);
string outputPath = Path.Combine(
ApplicationDataStorage.Instance.GCodeOutputPath,
$"nozzle-offset-template-combined.gcode");
File.WriteAllText(outputPath, gcodeSketch.ToGCode());
// HACK: update state needed to be set before calling StartPrint
printer.Connection.CommunicationState = CommunicationStates.PreparingToPrint;
await printer.Connection.StartPrint(outputPath);
// Wait for print start
while (!printer.Connection.PrintIsActive)
{
Thread.Sleep(500);
}
// Wait for print finished
while (printer.Connection.PrintIsActive)
{
Thread.Sleep(500);
}
if (printer.Settings.GetValue <bool>(SettingsKey.z_homes_to_max))
{
printer.Connection.HomeAxis(PrinterConnection.Axis.Z);
}
else
{
printer.Connection.MoveRelative(PrinterConnection.Axis.Z, 20, printer.Settings.Helpers.ManualMovementSpeeds().Z);
printer.Connection.MoveAbsolute(PrinterConnection.Axis.Y,
printer.Bed.Bounds.Top,
printer.Settings.Helpers.ManualMovementSpeeds().Y);
}
});
}