public static bool NeedsToBeRun(PrinterConfig printer)
{
PrintLevelingData levelingData = printer.Settings.Helpers.GetPrintLevelingData();
var required = printer.Settings.GetValue <bool>(SettingsKey.print_leveling_required_to_print);
if (required && levelingData == null)
{
// need but don't have data
return(true);
}
var enabled = printer.Settings.GetValue <bool>(SettingsKey.print_leveling_enabled);
// check if leveling is turned on
if (required && !enabled)
{
// need but not turned on
return(true);
}
if (!required && !enabled)
{
return(false);
}
// check that there are no duplicate points
var positionCounts = from x in levelingData.SampledPositions
group x by x into g
let count = g.Count()
orderby count descending
select new { Value = g.Key, Count = count };
foreach (var x in positionCounts)
{
if (x.Count > 1)
{
return(true);
}
}
// check that the solution last measured is the currently selected solution
if (printer.Settings.GetValue <LevelingSystem>(SettingsKey.print_leveling_solution) != levelingData.LevelingSystem)
{
return(true);
}
// check that the bed temperature at probe time was close enough to the current print bed temp
double requiredLevelingTemp = printer.Settings.GetValue <bool>(SettingsKey.has_heated_bed) ?
printer.Settings.GetValue <double>(SettingsKey.bed_temperature)
: 0;
// check that it is within 10 degrees
if (Math.Abs(requiredLevelingTemp - levelingData.BedTemperature) > 10)
{
return(true);
}
// check that the number of points sampled is correct for the solution
switch (levelingData.LevelingSystem)
{
case LevelingSystem.Probe3Points:
if (levelingData.SampledPositions.Count != 3) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe7PointRadial:
if (levelingData.SampledPositions.Count != 7) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe13PointRadial:
if (levelingData.SampledPositions.Count != 13) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe100PointRadial:
if (levelingData.SampledPositions.Count != 100) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe3x3Mesh:
if (levelingData.SampledPositions.Count != 9) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe5x5Mesh:
if (levelingData.SampledPositions.Count != 25) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe10x10Mesh:
if (levelingData.SampledPositions.Count != 100) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.ProbeCustom:
if (levelingData.SampledPositions.Count != LevelWizardCustom.ParseLevelingSamplePoints(printer).Count)
{
return(true);
}
break;
default:
throw new NotImplementedException();
}
// All the above need to pass, as well as all rules defined in ProbeCalibrationWizard - any variance and we need to re-run
return(ProbeCalibrationWizard.NeedsToBeRun(printer));
}
public static bool NeedsToBeRun(PrinterConfig printer)
{
PrintLevelingData levelingData = printer.Settings.Helpers.PrintLevelingData;
var required = printer.Settings.GetValue <bool>(SettingsKey.print_leveling_required_to_print);
if (required && levelingData == null)
{
// need but don't have data
return(true);
}
if (printer.Settings.GetValue <bool>(SettingsKey.has_hardware_leveling))
{
// If printer has hardware leveling, software leveling is disabled
return(false);
}
var enabled = printer.Settings.GetValue <bool>(SettingsKey.print_leveling_enabled);
if (enabled &&
printer.Settings.Helpers.ProbeBeingUsed &&
printer.Settings.GetValue <bool>(SettingsKey.validate_leveling))
{
return(false);
}
if (printer.Settings.Helpers.ValidateLevelingWithProbe)
{
// If we are going to validate the leveling before printing we do not need to
// make the user do it as part of printer calibration.
return(false);
}
// check if leveling is turned on
if (required && !enabled)
{
// need but not turned on
return(true);
}
if (!required && !enabled)
{
return(false);
}
// check that there are no duplicate points
var positionCounts = from x in levelingData.SampledPositions
group x by x into g
let count = g.Count()
orderby count descending
select new { Value = g.Key, Count = count };
foreach (var x in positionCounts)
{
if (x.Count > 1)
{
return(true);
}
}
// check that the solution last measured is the currently selected solution
if (printer.Settings.GetValue <LevelingSystem>(SettingsKey.print_leveling_solution) != levelingData.LevelingSystem)
{
return(true);
}
// check that the bed temperature at probe time was close enough to the current print bed temp
double requiredLevelingTemp = printer.Settings.GetValue <bool>(SettingsKey.has_heated_bed) ?
printer.Settings.GetValue <double>(SettingsKey.bed_temperature)
: 0;
// check that the number of points sampled is correct for the solution
switch (levelingData.LevelingSystem)
{
case LevelingSystem.Probe3Points:
if (levelingData.SampledPositions.Count != 3) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe7PointRadial:
if (levelingData.SampledPositions.Count != 7) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe13PointRadial:
if (levelingData.SampledPositions.Count != 13) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe100PointRadial:
if (levelingData.SampledPositions.Count != 100) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe3x3Mesh:
if (levelingData.SampledPositions.Count != 9) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe5x5Mesh:
if (levelingData.SampledPositions.Count != 25) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.Probe10x10Mesh:
if (levelingData.SampledPositions.Count != 100) // different criteria for what is not initialized
{
return(true);
}
break;
case LevelingSystem.ProbeCustom:
if (levelingData.SampledPositions.Count != LevelWizardCustom.ParseLevelingSamplePoints(printer).Count)
{
return(true);
}
break;
default:
throw new NotImplementedException();
}
return(false);
}
