internal static void RaiseEvents (IntPtr hwnd, int eventId, object idProp, int idObject, int idChild)
{
switch (idObject)
{
case NativeMethods.OBJID_CLIENT :
{
RaiseEventsOnClient(hwnd, eventId, idProp, idObject, idChild);
return;
}
case NativeMethods.OBJID_WINDOW :
{
// Special case for logical element change for a list view item
if ((eventId == NativeMethods.EventObjectReorder) && (idProp as AutomationEvent) == AutomationElement.StructureChangedEvent)
{
WindowsListView wlv = new WindowsListView( hwnd, null, -1 );
AutomationInteropProvider.RaiseStructureChangedEvent( wlv, new StructureChangedEventArgs( StructureChangeType.ChildrenInvalidated, wlv.MakeRuntimeId() ) );
return;
}
break;
}
case NativeMethods.OBJID_VSCROLL:
case NativeMethods.OBJID_HSCROLL:
// The NonClientArea proxy handles these events
break;
default :
{
ProxySimple el = new WindowsListView( hwnd, null, -1 );
if (el != null)
{
el.DispatchEvents( eventId, idProp, idObject, idChild );
}
break;
}
}
}
private static void RaiseEventsOnClient(IntPtr hwnd, int eventId, object idProp, int idObject, int idChild)
{
ProxySimple el = null;
WindowsListView wlv = new WindowsListView (hwnd, null, -1);
AutomationProperty automationProperty = idProp as AutomationProperty;
AutomationEvent automationEvent = idProp as AutomationEvent;
if (eventId == NativeMethods.EventObjectSelectionRemove && automationProperty == SelectionItemPattern.IsSelectedProperty)
{
el = wlv.CreateListViewItemCheckIfInGroup(idChild - 1);
if (el != null)
{
el.DispatchEvents(eventId, idProp, idObject, idChild);
return;
}
}
else if (eventId == NativeMethods.EventObjectSelection
|| eventId == NativeMethods.EventObjectSelectionRemove
|| eventId == NativeMethods.EventObjectSelectionAdd)
{
// This is the speced behavior for events and selection
//
// The following rule should be used to decide when to fire Selected vs Add/Remove events:
// If the result of a SelectElement or an AddElementToSelection is that a single item is selected,
// then send a Select for that element; otherwise send Add/Removes as appropriate.
// Note that this rule does not depend on whether the selection container is single- or multi- select,
// or on what method was used to change the selection. Only the result matters.
// Overall message to clients (test automation and assistive technologies)
//
// 1) If you receive ElementSelectedEvent this guarantees that the element that raised the
// event is the only selected element in that container.
// 2) If you receive ElementAddedToSelectionEvent this guarantees that those items are added
// to selection and the end result of the selection is more than one item.
// 3) If you receive ElementRemovedFromSelectionEvent this guarantees that those items are
// deselected and the end result is NOT one item selected.
//
// For the listview adhering to the spec is not possible because of an ambiguity with the winevents that
// are fired. This code is trying to map the winevents received to the UIAutomaiton events that are expected.
// These are the two cases that are ambiguous:
//
// Case 1:
// The user clicks two different items in succession.
// We get an EventObjectSelectionRemove WinEvent for each item that loses
// selection and in addition an EventObjectSelection for the new item that got selection.
// In this case we want to disregard the EventObjectSelectionRemove (not raise UIA
// ElementRemovedFromSelectionEvent) because the end result of this scenario is that only one item is selected.
//
// Case 2:
// If the ListView is multi-select and there are two items selected and the user cntl clicks on one (unselects it).
// The listview fires only one WinEvent (an EventObjectSelectionRemove) for the
// item that was removed. In this case since there is only one
// item left selected UIA should raise ElementSelectedEvent for the remaining item.
//
// If we turn the EventObjectSelectionRemove WinEvent in case 2 into a ElementSelected
// event for the remaining element we would end up firing two events for each click in a multi
// select list. This is because the EventObjectSelectionRemove in case 1 is just like
// the one case 2. Except that in case 1 we also get a EventObjectSelection separately so we
// would end up firing another selected event.
//
// It has been decided that it is preferred to receive extra EventObjectSelection events
// then receiving EventObjectSelectionRemove events at the wrong time. If two items are selected
// in a listview and the user clicks on one of them the only event winevent we get is a remove so
// we have to convert removed winevent to selected event or we would miss an event. So it better
// to have multiple events in some case than none when there should be ([....] 9/8/2004).
//
if (eventId == NativeMethods.EventObjectSelectionRemove && GetSelectedItemCount(hwnd) == 1)
{
if (MultiSelected(hwnd))
{
// Change the EventObjectSelectionRemove to an EventObjectSelection.
eventId = NativeMethods.EventObjectSelection;
idProp = SelectionItemPattern.ElementSelectedEvent;
// Change the child id to the selected child.
int item = GetStartOfSelectedItems(hwnd);
if (item > -1)
{
idChild = item + 1;
}
}
else
{
// Since case 2 does not apply to single selection listviews, suppress the
// EventObjectSelectionRemove.
return;
}
}
el = wlv.CreateListViewItemCheckIfInGroup(idChild - 1);
}
// GridItem case
else if (eventId == NativeMethods.EventObjectReorder && (automationProperty == GridItemPattern.ColumnProperty || automationProperty == GridItemPattern.RowProperty))
{
// GridItem case. We need to recursively call all of the list items
for (el = wlv.GetFirstChild(); el != null; el = wlv.GetNextSibling(el))
{
el.DispatchEvents(eventId, idProp, idObject, idChild);
}
return;
}
// Map the WinEvent NameChange to ValueChange to go through the dispatch
else if (eventId == NativeMethods.EventObjectNameChange)
{
el = wlv.CreateListViewItemCheckIfInGroup(idChild - 1);
eventId = NativeMethods.EventObjectValueChange;
}
// Change of state for the check box must generates a StateChange Win Events.
// Map it to of ObjectChange for the checkbox
else if (eventId == NativeMethods.EventObjectStateChange && CheckBoxes(hwnd))
{
el = wlv.CreateListViewItemCheckIfInGroup(idChild - 1);
el = ((ProxyFragment)el).GetFirstChild();
eventId = NativeMethods.EventObjectValueChange;
// Assert if the assumption that the first child is a check box is false
System.Diagnostics.Debug.Assert(el is ListViewItemCheckbox);
}
// Special case for logical element change for a list view item
else if ((eventId == NativeMethods.EventObjectDestroy || eventId == NativeMethods.EventObjectCreate) && automationEvent == AutomationElement.StructureChangedEvent)
{
ProxySimple parent = wlv;
bool fGroupView = IsGroupViewEnabled(hwnd);
// Allways disable the groups as one may have been created or
// destroyed
if (fGroupView)
{
// remove groupmanager from collection
_groupsCollection.Remove(hwnd);
// If it is an object creation, create the element and picks
// its parent to invalidate. The parent can be either a group
// or the listview itself.
if (eventId == NativeMethods.EventObjectCreate && fGroupView)
{
// Get the item with the resetted collection of groups (may be null if the group is empty)
ProxySimple lvi = wlv.CreateListViewItemCheckIfInGroup(idChild - 1);
if (lvi != null)
parent = lvi.GetParent();
}
}
// If the element destroyed is in a group invalidate the whole listview as we have no
// idea the element was part of before
// Since children are referenced by position in the tree, addition and removal
// of items leads to different results when asking properties for the same element
// On removal, item + 1 is now item!
// Use Children Invalidated to let the client knows that all the cached children are invalid
AutomationInteropProvider.RaiseStructureChangedEvent( parent, new StructureChangedEventArgs( StructureChangeType.ChildrenInvalidated, parent.MakeRuntimeId() ) );
return;
}
else
{
el = wlv;
}
if (el != null)
{
el.DispatchEvents(eventId, idProp, idObject, idChild);
}
return;
}
internal static IRawElementProviderSimple Create(IntPtr hwnd, int idChild)
{
WindowsListView lv = new WindowsListView(hwnd, null, 0);
if( idChild == 0 )
return lv;
else
return lv.CreateListViewItemCheckIfInGroup (idChild - 1);
}
