private void dataGridView1_CellClick(object sender, DataGridViewCellEventArgs e)
{
if (e.ColumnIndex < 0 | e.RowIndex < 0)
{
return;
}
if (dataGridView1.Columns[e.ColumnIndex].Name == columnConfig)
{
DataGridViewDisableButtonCell buttonCell =
(DataGridViewDisableButtonCell)dataGridView1.
Rows[e.RowIndex].Cells[columnConfig];
if (buttonCell.Enabled)
{
//MessageBox.Show(dataGridView1.Rows[e.RowIndex].
// Cells[e.ColumnIndex].Value.ToString() +
// " is enabled");
modbusmasterDeviceform form = new modbusmasterDeviceform();
ModbusMasterData data = masterManage.modbusMastrList.ElementAt(e.RowIndex);
form.getMasterData(ref data);
form.ShowDialog();
}
}
}
public static ModbusMasterData GetInstance1()
{
if (curMasterData == null)
{
curMasterData = new ModbusMasterData();
}
return(curMasterData);
}
public void getMasterData(ref ModbusMasterData data, int masterStartAddr, ModbusMasterManage a, int masterid)
{
masterData_ = data;
masterData_.ID = data.ID;
masterStartAddr_ = masterStartAddr;
mastermanage = a;
MID = masterid;
}
public void getDeviceData(ref DeviceData data, int masterStartAddr, ref ModbusMasterData masterData, ref ModbusMasterManage mmange, int masterid, int masterdevid)
{
deviceData_ = data;
masterStartAddr_ = masterStartAddr;
masterData_ = masterData;
mastermanage = mmange;
MID = masterid;
MDID = masterdevid;
}
public void add(ModbusMasterData data)
{
getMasterStartAddr();
data.curMasterStartAddr = masterStartAddr;
data.curMasterStartAddr += utility.modbusMudule * modbusMastrList.Count;
modbusMastrList.Add(data);
}
public void initForm()
{
//load 事件只加载一次，工程重新加载需清空之前函数
//init是load加载后，initForm才可以加载
if (init == false)
{
return;
}
//for (int i = dataGridView1.Rows.Count - 1; i >= 0; i--)
//{
// dataGridView1.Rows.RemoveAt(i);
//}
dataGridView1.Rows.Clear();
dataGridView1.Columns.Clear();
dataGridView2.Rows.Clear();
dataGridView2.Columns.Clear();
createColumn();
createDetailColumn();
//DataGridViewDisableButtonColumn buttonColumn = new DataGridViewDisableButtonColumn();
//buttonColumn.Name = columnConfig;
//DataGridViewTextBoxColumn cellColumn = new DataGridViewTextBoxColumn();
//cellColumn.Name = "ID";
//dataGridView1.Columns.Add(cellColumn);
//dataGridView1.Columns.Add(buttonColumn);
dataGridView1.RowCount += /*8*/ masterManage.modbusMastrList.Count;
//dataGridView1.AutoSize = true;
//dataGridView1.AllowUserToAddRows = false;
//dataGridView1.ColumnHeadersDefaultCellStyle.Alignment =
// DataGridViewContentAlignment.MiddleCenter;
for (int i = 0; i < masterManage.modbusMastrList.Count; i++)
{
ModbusMasterData data = masterManage.modbusMastrList.ElementAt(i);
dataGridView1.Rows[i].Cells["ID"].Value = data.ID;
dataGridView1.Rows[i].Cells[columnConfig].Value = "..." /* + i.ToString()*/;
dataGridView1.Rows[i].Cells["详细信息"].Value = "..." /* + i.ToString()*/;
}
}
public void modbusmastermain_Load(object sender, EventArgs e)
{
init = true;
//for(int i = 0; i < dataGridView1.Rows.Count; i++)
//{
// dataGridView1.Rows.RemoveAt(i);
//}
dataGridView1.Rows.Clear();
//for (int i = 0; i < dataGridView1.Columns.Count; i++)
//{
// dataGridView1.Columns.RemoveAt(i);
//}
createColumn();
createDetailColumn();
dataGridView1.RowCount = /*8*/ 1 + masterManage.modbusMastrList.Count;
//dataGridView1.AutoSize = true;
dataGridView1.AllowUserToAddRows = false;
dataGridView1.ColumnHeadersDefaultCellStyle.Alignment =
DataGridViewContentAlignment.MiddleCenter;
dataGridView1.ColumnHeadersHeight = 20;
dataGridView2.RowCount = 1;
dataGridView2.AllowUserToAddRows = false;
dataGridView1.ColumnHeadersDefaultCellStyle.Alignment =
DataGridViewContentAlignment.MiddleCenter;
//dataGridView2.AutoSizeColumnsMode = DataGridViewAutoSizeColumnsMode.ColumnHeader;
dataGridView2.ColumnHeadersHeightSizeMode = DataGridViewColumnHeadersHeightSizeMode.DisableResizing;
dataGridView2.ColumnHeadersHeight = dataGridView1.ColumnHeadersHeight;
dataGridView2.Columns[2].Width = 255;
for (int i = 0; i < masterManage.modbusMastrList.Count; i++)
{
ModbusMasterData data = masterManage.modbusMastrList.ElementAt(i);
dataGridView1.Rows[i].Cells["ID"].Value = data.ID;
dataGridView1.Rows[i].Cells[columnConfig].Value = "..." /* + i.ToString()*/;
dataGridView1.Rows[i].Cells[columnDetail].Value = "..." /* + i.ToString()*/;
}
}
private void button_add_Click(object sender, EventArgs e)
{
int row = dataGridView1.RowCount;
dataGridView1.RowCount += 1;
// Set the text for each button.
int i = row;
ModbusMasterData data = new ModbusMasterData();
// for (int i = 0; i < dataGridView1.RowCount; i++)
{
dataGridView1.Rows[i].Cells["ID"].Value = row;
data.ID = row;
dataGridView1.Rows[i].Cells[columnConfig].Value = "Button " + i.ToString();
//data.device = new DeviceData();
masterManage.modbusMastrList.Add(data);
}
}
public void add(ModbusMasterData data)
{
modbusMastrList.Add(data);
}
public void getMasterData(ref ModbusMasterData data)
{
data_ = data;
data_.ID = 222;
}
private void dataGridView1_CellClick(object sender, DataGridViewCellEventArgs e)
{
if (e.ColumnIndex < 0 | e.RowIndex < 0)
{
return;
}
if (dataGridView1.Columns[e.ColumnIndex].Name == columnConfig)
{
DataGridViewDisableButtonCell buttonCell =
(DataGridViewDisableButtonCell)dataGridView1.
Rows[e.RowIndex].Cells[columnConfig];
if (buttonCell.Enabled)
{
//MessageBox.Show(dataGridView1.Rows[e.RowIndex].
// Cells[e.ColumnIndex].Value.ToString() +
// " is enabled");
modbusmasterDeviceform form = new modbusmasterDeviceform();
ModbusMasterData data = masterManage.modbusMastrList.ElementAt(e.RowIndex);
ModbusMasterManage a = masterManage;
int masterStartAddr = masterManage.getMasterStartAddr();
form.getMasterData(ref data, masterStartAddr, a, e.RowIndex);
form.StartPosition = FormStartPosition.CenterScreen;
form.ShowDialog();
}
}
else if (dataGridView1.Columns[e.ColumnIndex].Name == columnDetail)
{
DataGridViewDisableButtonCell buttonCell =
(DataGridViewDisableButtonCell)dataGridView1.
Rows[e.RowIndex].Cells[columnConfig];
if (buttonCell.Enabled)
{
var modbusDeviceList = masterManage.modbusMastrList[e.RowIndex].modbusDeviceList;
var count = 0;
dataGridView2.Rows.Clear();
for (int i = 0; i < modbusDeviceList.Count; i++)
{
count += modbusDeviceList[i].modbusChannelList.Count;
}
dataGridView2.RowCount += count;
//dataGridView2.AutoSize = true;
//dataGridView2.AllowUserToAddRows = false;
//dataGridView2.ColumnHeadersDefaultCellStyle.Alignment =
// DataGridViewContentAlignment.MiddleCenter;
int j = 0;
foreach (var device in modbusDeviceList)
{
string deviceName = device.nameDev;
foreach (var channel in device.modbusChannelList)
{
string channelName = channel.nameChannel;
dataGridView2.Rows[j].Cells["设备名"].Value = deviceName;
dataGridView2.Rows[j].Cells["通道名"].Value = channelName;
dataGridView2.Rows[j].Cells["功能码"].Value = dicMsg[channel.msgType];
dataGridView2.Rows[j].Cells["通道起始地址"].Value = channel.curChannelAddr + 3;
dataGridView2.Rows[j].Cells["长度"].Value = channel.readLength;
dataGridView2.Rows[j].Cells["触发变量地址"].Value = channel.writeOffset;
dataGridView2.Rows[j].Cells["错误变量地址"].Value = channel.writeLength;
j++;
}
}
}
}
}
public void loadXml(XmlNode xn)
{
XmlNodeList nodeList = xn.ChildNodes; //创建xn的所有子节点的集合
foreach (XmlNode childNode in nodeList) //遍历集合中所有的节点
{
XmlElement e = (XmlElement)childNode;
string name = e.Name;
string test = e.GetAttribute("name");//获取该节点中所有name属性的值
Console.WriteLine(name);
ModbusMasterData data = new ModbusMasterData();
int.TryParse(e.GetAttribute("id"), out data.ID);//将所有id属性的值（字符串）,转换成int32类型，输出变量为data.ID
data.transformChannel = e.GetAttribute("transformchannel");
int.TryParse(e.GetAttribute("transformmode"), out data.transformMode);
int.TryParse(e.GetAttribute("responsetimeout"), out data.responseTimeout);
int.TryParse(e.GetAttribute("packet_interval"), out data.packet_interval);
bool.TryParse(e.GetAttribute("isready"), out data.isready);
//data.transformChannel = int.TryParse(eChild.GetAttribute("transformchannel"));
//读取device数据
XmlNodeList nodeDeviceList = childNode.ChildNodes;//创建当前子设备节点下的所有子节点集合
foreach (XmlNode childDeviceNode in nodeDeviceList)
{
e = (XmlElement)childDeviceNode; //子设备节点
DeviceData deviceData = new DeviceData();
int.TryParse(e.GetAttribute("ID"), out deviceData.ID); //为各子节点赋值
deviceData.nameDev = e.GetAttribute("namedev");
deviceData.slaveAddr = e.GetAttribute("slaveaddr");
int.TryParse(e.GetAttribute("responsetimeout"), out deviceData.reponseTimeout);
int.TryParse(e.GetAttribute("permittimeoutcount"), out deviceData.permitTimeoutCount);
int.TryParse(e.GetAttribute("reconnectinterval"), out deviceData.reconnectInterval);
deviceData.resetVaraible = e.GetAttribute("resetvaraible");
string[] resetkey = e.GetAttribute("resetkey").Split('m');
deviceData.resetkey[0] = resetkey[0];
deviceData.resetkey[1] = resetkey[1];
int.TryParse(e.GetAttribute("devstartaddr"), out deviceData.curDeviceAddr);
int.TryParse(e.GetAttribute("devlength"), out deviceData.curDeviceLength);
//读取channel数据
XmlNodeList nodeChannelList = childDeviceNode.ChildNodes;
foreach (XmlNode childChannelNode in nodeChannelList)
{
e = (XmlElement)childChannelNode;
ChannelData channelData = new ChannelData();
int.TryParse(e.GetAttribute("ID"), out channelData.ID);
channelData.nameChannel = e.GetAttribute("namechannel");
int.TryParse(e.GetAttribute("msgtype"), out channelData.msgType);
int.TryParse(e.GetAttribute("trig_mode"), out channelData.trig_mode);
int.TryParse(e.GetAttribute("pollingtime"), out channelData.pollingTime);
int.TryParse(e.GetAttribute("offset"), out channelData.readOffset);
int.TryParse(e.GetAttribute("length"), out channelData.readLength);
channelData.trigger = e.GetAttribute("trigger_offset");
string[] trigoffset = e.GetAttribute("triggeroffsetkey").Split('m');
channelData.offsetkey[0] = trigoffset[0];
trigoffset[1].Substring(0, 2);
channelData.offsetkey[1] = trigoffset[1].Substring(0, 2);
channelData.offsetkey[2] = trigoffset[1].Substring(2);
channelData.error = e.GetAttribute("error_offset");
int.TryParse(e.GetAttribute("channelstartaddr"), out channelData.curChannelAddr);
int.TryParse(e.GetAttribute("channellength"), out channelData.curChannelLength);
//int.TryParse(e.GetAttribute("writeoffset"), out channelData.writeOffset);
//int.TryParse(e.GetAttribute("writelength"), out channelData.writeLength);
channelData.note = e.GetAttribute("note");
int.TryParse(e.GetAttribute("edit"), out channelData.edit);
deviceData.modbusChannelList.Add(channelData);
}
data.modbusDeviceList.Add(deviceData);
}
masterManage.add(data);//添加进xml
mastermanege1 = masterManage;
}
}
//ttttttttttttttttttttttttttttttt
//ttest
private void button_add_Click(object sender, EventArgs e)
{
// 动态添加创建数组刷新
//C: \Users\Public\Documents\MULTIPROG\Projects\ttt13579\DT\datatype
// 从文件中读取并显示每行
//string fullName = UserControl1.multiprogApp.ActiveProject.Path + "\\" + UserControl1.multiprogApp.ActiveProject.Name + "\\DT\\datatype\\datatype.TYB";
//;
//string path = UserControl1.multiprogApp.ActiveProject.FullName;
//FileStream fs1 = new FileStream(fullName, FileMode.Open, FileAccess.Read);
//StreamReader sr1 = new StreamReader(fs1, Encoding.Default);
//string s;
//s = sr1.ReadLine();
//string strSave = "";
//string compare1 = "TYPE";
//string compare2 = "Task_Info_eCLR :";
//string compare3 = "STRUCT";
//string compare4 = "TaskStack : INT;";
//string compare5 = "END_STRUCT;";
//string compare6 = "END_TYPE";
//int count = 0;
//while (s != null)
//{
// strSave += s + "\r\n";
// s = s.Trim();
// if (compare1 == s)
// {
// count = 0;
// count++;
// }
// else if (compare2 == s)
// {
// count++;
// }
// else if (compare3 == s)
// {
// count++;
// }
// else if (compare4 == s)
// {
// count++;
// }
// else if (compare5 == s)
// {
// count++;
// }
// else if (compare6 == s)
// {
// count++;
// if(count == 6)
// {
// int a = 5;
// a = 6;
// break;
// }
// }
// s = sr1.ReadLine();
//}
//fs1.Close();
//sr1.Close();
//FileStream fs = new FileStream(fullName, FileMode.OpenOrCreate);
//fs.SetLength(0);
//StreamWriter sw = new StreamWriter(fs, Encoding.Default);
////sw.WriteLine("TYPE\r\nnimade: ARRAY[0..20] OF BYTE;\r\nEND_TYPE");
//sw.WriteLine(strSave);
//sw.Close();
//fs.Close();
////UserControl1.multiprogApp.ActiveProject.Close();
////UserControl1.multiprogApp.OpenProject(path, AdeConfirmRule.adeCrConfirm);
//UserControl1.multiprogApp.ActiveProject.Compile(AdeCompileType.adeCtMake);
//UserControl1.multiprogApp.ActiveProject.Compile(AdeCompileType.adeCtBuild);
LocalPLC.ModbusServer.DataManager servermanage = null;
serverdata.getservermanage(ref servermanage);
LocalPLC.Base.xml.DataManageBase baseData = null;
UC.getDataManager(ref baseData);
int num = 0;
foreach (string serialname in baseData.serialDic.Keys)
{
for (int k = 0; k < masterManage.modbusMastrList.Count; k++)
{
if (masterManage.modbusMastrList[k].transformChannel == serialname)
{
num++;
}
}
for (int j = 0; j < servermanage.listServer.Count; j++)
{
if (servermanage.listServer[j].dataDevice_.transformportdescribe == serialname)
{
num++;
}
}
}
if (dataGridView1.RowCount >= utility.masterCount)
{
string err = string.Format("master最大个数是{0}", utility.masterCount);
utility.PrintError(err);
return;
}
if (num >= baseData.serialDic.Count)
{
string err = string.Format("串口已用完");
utility.PrintError(err);
return;
}
int row = dataGridView1.RowCount;
dataGridView1.RowCount += 1;
// Set the text for each button.
int i = row;
ModbusMasterData data = new ModbusMasterData();
// for (int i = 0; i < dataGridView1.RowCount; i++)
{
dataGridView1.Rows[i].Cells["ID"].Value = row;
data.ID = row;
dataGridView1.Rows[i].Cells[columnConfig].Value = "..." /* + i.ToString()*/;
dataGridView1.Rows[i].Cells[columnDetail].Value = "..." /* + i.ToString()*/;
//data.device = new DeviceData();
//masterManage.modbusMastrList.Add(data);
masterManage.add(data);
//utility.addIOGroups();
mastermanege1 = masterManage;
data.isready = false;
//refreshaddr();
}
}
public void saveJson(JsonTextWriter writer)
{
//添加modbusmaster节点
ModbusMasterManage master = masterManage;
if (master.modbusMastrList.Count > 0)
{
writer.WritePropertyName("mbserial_master");
writer.WriteStartObject(); //添加{ master节点
writer.WritePropertyName("number");
writer.WriteValue(masterManage.modbusMastrList.Count); //number
writer.WritePropertyName("time_uint");
writer.WriteValue("ms"); //时间单位
int index = 0;
writer.WritePropertyName("conf");
writer.WriteStartArray(); //[ master节点下conf数组
for (int i = 0; i < masterManage.modbusMastrList.Count; i++) //遍历所有Client的集合
{
ModbusMasterData data = masterManage.modbusMastrList.ElementAt(i);
writer.WriteStartObject();//{ master节点下device
writer.WritePropertyName("port");
if (data.transformChannel == "COM1")
{
writer.WriteValue("ser_port7");
}
else if (data.transformChannel == "COM2")
{
writer.WriteValue("ser_port1");
}
else if (data.transformChannel == "COM3")
{
writer.WriteValue("ser_port0");
}
else if (data.transformChannel == "COM4")
{
writer.WriteValue("ser_port2");
}
else if (data.transformChannel == "COM5")
{
writer.WriteValue("ser_port3");
}
else if (data.transformChannel == "COM6")
{
writer.WriteValue("ser_port8");
}
else
{
writer.WriteValue("");
}
writer.WritePropertyName("response_timeout");
writer.WriteValue(data.responseTimeout);
writer.WritePropertyName("packet_interval");
writer.WriteValue(data.packet_interval);
string mode = null;
if (data.transformMode == 0)
{
mode = "rtu";
}
else if (data.transformMode == 1)
{
mode = "ascii";
}
writer.WritePropertyName("mode");
writer.WriteValue(mode);
writer.WritePropertyName("dev_namestr");
writer.WriteValue("mbserial" + "_master" + data.ID);
writer.WritePropertyName("slave");
writer.WriteStartObject();//{ slave节点 从设备信息
writer.WritePropertyName("num");
writer.WriteValue(data.modbusDeviceList.Count);
if (i > 0)
{
index = i * masterManage.modbusMastrList[i - 1].modbusDeviceList.Count;
}
writer.WritePropertyName("conf");
writer.WriteStartArray(); //[ slave节点conf
for (int j = 0; j < data.modbusDeviceList.Count; j++) //循环添加每个设备的各参数至
{
DeviceData dataDev = data.modbusDeviceList.ElementAt(j);
writer.WriteStartObject();//{ conf数组下节点，从设备信息
writer.WritePropertyName("slave_id");
try
{
int sid = Convert.ToInt32(dataDev.slaveAddr);
}
catch
{
return;
}
writer.WriteValue(Convert.ToInt32(dataDev.slaveAddr));
writer.WritePropertyName("timeout_cnt_max");
writer.WriteValue(dataDev.permitTimeoutCount);
writer.WritePropertyName("retry_interval");
writer.WriteValue(dataDev.reconnectInterval);
writer.WritePropertyName("io_range");
writer.WriteStartObject(); //{ conf数组下 iorange
writer.WritePropertyName("start");
writer.WriteValue(dataDev.curDeviceAddr); //io范围这块上位机设计方案中在master和client中并没有提到，需要确认
writer.WritePropertyName("bytes");
writer.WriteValue(dataDev.curDeviceLength);
writer.WriteEndObject();//} conf数组下 iorange
writer.WritePropertyName("restart_offset");
writer.WriteValue(0);
writer.WritePropertyName("channel_cfg");
writer.WriteStartObject();//{ channel_cfg节点
writer.WritePropertyName("num");
writer.WriteValue(dataDev.modbusChannelList.Count);
writer.WritePropertyName("conf");
writer.WriteStartArray(); //[ channel_cfg节点下conf数组
for (int k = 0; k < dataDev.modbusChannelList.Count; k++) //循环添加通道至子设备节点下
{
ChannelData dataChannel = dataDev.modbusChannelList.ElementAt(k);
writer.WriteStartObject();//{ channel_cfg节点下conf数组中channel信息
writer.WritePropertyName("channel_id");
writer.WriteValue(dataChannel.ID);
writer.WritePropertyName("channel" + dataChannel.ID);
writer.WriteValue(dataChannel.nameChannel);
writer.WritePropertyName("msg_type");
writer.WriteValue(dataChannel.msgType);
writer.WritePropertyName("trig_mode");//trig_mode的含义？？
writer.WriteValue(dataChannel.trig_mode);
writer.WritePropertyName("polling_time");
writer.WriteValue(dataChannel.pollingTime);
writer.WritePropertyName("offset");//偏移这块和我们上位机草图设计有一些出入，需要确认
writer.WriteValue(dataChannel.readOffset);
writer.WritePropertyName("quantity");
writer.WriteValue(dataChannel.readLength);
writer.WritePropertyName("io_offset");
writer.WriteValue(dataChannel.curChannelAddr + 3 - dataDev.curDeviceAddr);
writer.WritePropertyName("io_bytes");
writer.WriteValue(dataChannel.curChannelLength - 3);
writer.WritePropertyName("trigger_offset");
writer.WriteValue(dataChannel.curChannelAddr - dataDev.curDeviceAddr);
writer.WritePropertyName("error_offset");
writer.WriteValue(dataChannel.curChannelAddr + 1 - dataDev.curDeviceAddr);
writer.WritePropertyName("direction"); //direction参数的含义？？
writer.WriteValue("in");
writer.WriteEndObject(); //} channel_cfg节点下conf数组中channel信息
}
writer.WriteEndArray(); //] channel_cfg节点下conf数组
writer.WriteEndObject(); //} channel_cfg节点
writer.WriteEndObject(); //} conf数组下节点，从设备信息
}
writer.WriteEndArray(); //] slave节点conf
writer.WriteEndObject(); //} slave节点 从设备信息
writer.WriteEndObject(); //} client节点下device
}
writer.WriteEndArray(); //] client节点下conf数组
writer.WriteEndObject(); //添加} master节点
}
}
public void saveXml(ref XmlElement elem, ref XmlDocument doc)
{
XmlElement elem1 = doc.CreateElement("modbusmaster");
elem1.SetAttribute("number", dataGridView1.RowCount.ToString());
elem1.SetAttribute("time_unit", "ms");
elem.AppendChild(elem1);
//XmlElement elemc = doc.CreateElement("conf");
//elemc.SetAttribute("mode",);
//master项
for (int i = 0; i < masterManage.modbusMastrList.Count; i++)//遍历所有的modbusmaster集合
{
ModbusMasterData data = masterManage.modbusMastrList.ElementAt(i);
XmlElement elem1_m = doc.CreateElement("m"); //创建m节点
elem1_m.SetAttribute("id", data.ID.ToString()); //给id节点赋值，值为data.ID
//transformChannel com1 com2 com3
elem1_m.SetAttribute("transformchannel", data.transformChannel);
//0 RTU 1 ASCII
elem1_m.SetAttribute("transformmode", data.transformMode.ToString());
elem1_m.SetAttribute("responsetimeout", data.responseTimeout.ToString());
elem1_m.SetAttribute("packet_interval", data.packet_interval.ToString());
elem1_m.SetAttribute("isready", data.isready.ToString());
//create devices
for (int j = 0; j < data.modbusDeviceList.Count; j++) //循环添加每个设备的各参数值至xml
{
DeviceData dataDev = data.modbusDeviceList.ElementAt(j);
XmlElement elem1_m_d = doc.CreateElement("device");
elem1_m_d.SetAttribute("ID", dataDev.ID.ToString());
elem1_m_d.SetAttribute("namedev", dataDev.nameDev.ToString());
elem1_m_d.SetAttribute("slaveaddr", dataDev.slaveAddr.ToString());
elem1_m_d.SetAttribute("responsetimeout", dataDev.reponseTimeout.ToString());
elem1_m_d.SetAttribute("permittimeoutcount", dataDev.permitTimeoutCount.ToString());
elem1_m_d.SetAttribute("reconnectinterval", dataDev.reconnectInterval.ToString());
elem1_m_d.SetAttribute("resetvaraible", dataDev.resetVaraible);
elem1_m_d.SetAttribute("resetkey", dataDev.resetkey[0] + "m" + dataDev.resetkey[1]);
elem1_m_d.SetAttribute("devstartaddr", dataDev.curDeviceAddr.ToString());
elem1_m_d.SetAttribute("devlength", dataDev.curDeviceLength.ToString());
//通道
for (int k = 0; k < dataDev.modbusChannelList.Count; k++)//循环添加通道至子设备节点下
{
ChannelData dataChannel = dataDev.modbusChannelList.ElementAt(k);
XmlElement elem1_m_d_c = doc.CreateElement("channel");
elem1_m_d_c.SetAttribute("ID", dataChannel.ID.ToString());
elem1_m_d_c.SetAttribute("namechannel", dataChannel.nameChannel);
elem1_m_d_c.SetAttribute("msgtype", dataChannel.msgType.ToString());
elem1_m_d_c.SetAttribute("trig_mode", dataChannel.trig_mode.ToString());
elem1_m_d_c.SetAttribute("pollingtime", dataChannel.pollingTime.ToString());
elem1_m_d_c.SetAttribute("offset", dataChannel.readOffset.ToString());
elem1_m_d_c.SetAttribute("length", dataChannel.readLength.ToString());
elem1_m_d_c.SetAttribute("trigger_offset", dataChannel.trigger.ToString());
elem1_m_d_c.SetAttribute("triggeroffsetkey", dataChannel.offsetkey[0] + "m" + dataChannel.offsetkey[1] + dataChannel.offsetkey[2] + "m" + dataChannel.offsetkey1);
elem1_m_d_c.SetAttribute("error_offset", dataChannel.error.ToString());
elem1_m_d_c.SetAttribute("erroroffsetkey", dataChannel.offsetkey[0] + "m" + dataChannel.offsetkey[1] + dataChannel.offsetkey[2] + "m" + dataChannel.offsetkey2);
elem1_m_d_c.SetAttribute("channelstartaddr", dataChannel.curChannelAddr.ToString());
elem1_m_d_c.SetAttribute("channellength", dataChannel.curChannelLength.ToString());
// elem1_m_d_c.SetAttribute("writeoffset", dataChannel.writeOffset.ToString());
//elem1_m_d_c.SetAttribute("writelength", dataChannel.writeLength.ToString());
elem1_m_d_c.SetAttribute("note", dataChannel.note.ToString());
elem1_m_d_c.SetAttribute("edit", dataChannel.edit.ToString());
elem1_m_d.AppendChild(elem1_m_d_c);//将通道节点作为子节点加入设备节点
}
elem1_m.AppendChild(elem1_m_d);
}
//XmlElement elem1_d = doc.CreateElement("device");
//elem1_m.SetAttribute("id", data.ID.ToString());
elem1.AppendChild(elem1_m);
}
}
