//一键开机 程序
private bool One_Key_OFF()
{
//状态变量
decimal Seed_Current = 0; //Seed电流
decimal Amp1_Current = 0; //Amp1电流
decimal Amp2_Current = 0; //Amp2电流
byte Status = 0x00;
Power_On.Enabled = false; //禁用一键开机按钮
Power_OFF.Enabled = false; //禁用一键关机按钮
Refresh_Status.Enabled = false; //禁用状态更新按钮
Reset_Laser.Enabled = false; //禁用复位按钮
Watt_Confirm.Enabled = false; //禁用功率写入按钮
Frequence_Confirm.Enabled = false; //禁用频率写入按钮
Re_connect.Enabled = false; //禁用串口开关按钮
/**************AMP2 Ldd***************/
//读取AMP2电流
Initial.Laser_Operation_00.Read("02", "12");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 2))
{
Amp2_Current = ((decimal)BitConverter.ToUInt16(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte, 0) / 100m);
}
Thread.Sleep(300);//等待300ms
//关闭AMP2 Ldd
if (Amp2_Current > 0.2m)
{
Initial.Laser_Operation_00.Write("02", "10", "00");
}
Task.Factory.StartNew(() =>
{
do
{
//读取AMP2电流
Initial.Laser_Operation_00.Read("02", "12");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 2))
{
Amp2_Current = ((decimal)BitConverter.ToUInt16(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte, 0) / 100m);
}
Thread.Sleep(300); //等待300ms
} while (Amp2_Current > 0.2m);
}).Wait(120 * 1000); //2 * 1000,ms,该时间范围内：代码段完成 或 超出该时间范围 返回并继续向下执行
if (Amp2_Current > 0.2m)
{
return(false);
}
//刷新状态
Refresh_All_Status();
/**************AMP1 Ldd***************/
//读取AMP1电流
Initial.Laser_Operation_00.Read("01", "12");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 2))
{
Amp1_Current = ((decimal)BitConverter.ToUInt16(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte, 0) / 100m);
}
Thread.Sleep(300);//等待300ms
//关闭AMP1 Ldd
if (Amp1_Current > 0.2m)
{
Initial.Laser_Operation_00.Write("01", "10", "00");
}
Task.Factory.StartNew(() =>
{
do
{
//读取AMP1电流
Initial.Laser_Operation_00.Read("01", "12");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 2))
{
Amp1_Current = ((decimal)BitConverter.ToUInt16(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte, 0) / 100m);
}
Thread.Sleep(300); //等待300ms
} while (Amp1_Current > 0.2m);
}).Wait(120 * 1000); //2 * 1000,ms,该时间范围内：代码段完成 或 超出该时间范围 返回并继续向下执行
if (Amp1_Current > 0.2m)
{
return(false);
}
//刷新状态
Refresh_All_Status();
/**************AOM Pulse Status***************/
//读取AOM Pulse
Initial.Laser_Operation_00.Read("00", "66");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 1))
{
Status = Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte[Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length - 1];
}
Thread.Sleep(300);//等待300ms
//关闭AOM Pulse
if (Bit_Value.GetBitValue(Status, 0))
{
Initial.Laser_Operation_00.Write("00", "66", "00");
}
Task.Factory.StartNew(() =>
{
do
{
//读取AOM Pulse
Initial.Laser_Operation_00.Read("00", "66");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 1))
{
Status = Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte[Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length - 1];
}
Thread.Sleep(300); //等待300ms
} while (Bit_Value.GetBitValue(Status, 0));
}).Wait(5 * 1000); //2 * 1000,ms,该时间范围内：代码段完成 或 超出该时间范围 返回并继续向下执行
if (Bit_Value.GetBitValue(Status, 0))
{
return(false);
}
//刷新状态
Refresh_All_Status();
/**************PP Pulse Status***************/
//读取PP Pulse
Initial.Laser_Operation_00.Read("00", "65");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 1))
{
Status = Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte[Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length - 1];
}
Thread.Sleep(300);//等待300ms
//关闭PP Pulse
if (Bit_Value.GetBitValue(Status, 0))
{
Initial.Laser_Operation_00.Write("00", "65", "00");
}
Task.Factory.StartNew(() =>
{
do
{
//读取PP Pulse
Initial.Laser_Operation_00.Read("00", "65");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 1))
{
Status = Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte[Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length - 1];
}
Thread.Sleep(300); //等待300ms
} while (Bit_Value.GetBitValue(Status, 0));
}).Wait(5 * 1000); //2 * 1000,ms,该时间范围内：代码段完成 或 超出该时间范围 返回并继续向下执行
if (Bit_Value.GetBitValue(Status, 0))
{
return(false);
}
//刷新状态
Refresh_All_Status();
/**************Seed Shutter Status***************/
//读取Seed Shutter
Initial.Laser_Operation_00.Read("00", "04");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 1))
{
Status = Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte[Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length - 1];
}
Thread.Sleep(300);//等待300ms
//关闭Seed Shutter
if (Bit_Value.GetBitValue(Status, 0))
{
Initial.Laser_Operation_00.Write("00", "04", "00");
}
Task.Factory.StartNew(() =>
{
do
{
//读取Seed Shutter
Initial.Laser_Operation_00.Read("00", "04");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 1))
{
Status = Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte[Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length - 1];
}
Thread.Sleep(300); //等待300ms
} while (Bit_Value.GetBitValue(Status, 0));
}).Wait(5 * 1000); //2 * 1000,ms,该时间范围内：代码段完成 或 超出该时间范围 返回并继续向下执行
if (Bit_Value.GetBitValue(Status, 0))
{
return(false);
}
//刷新状态
Refresh_All_Status();
/**************Seed Ldd***************/
//读取Seed电流
Initial.Laser_Operation_00.Read("00", "12");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 2))
{
Seed_Current = ((decimal)BitConverter.ToUInt16(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte, 0) / 100m);
}
Thread.Sleep(300);//等待300ms
//关闭Seed Ldd
if (Seed_Current > 0.2m)
{
Initial.Laser_Operation_00.Write("00", "10", "00");
}
//状态判断
Task.Factory.StartNew(() =>
{
do
{
//读取Seed电流
Initial.Laser_Operation_00.Read("00", "12");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 2))
{
Seed_Current = ((decimal)BitConverter.ToUInt16(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte, 0) / 100m);
}
Thread.Sleep(300); //等待300ms
} while (Seed_Current > 0.2m);
}).Wait(120 * 1000); //2 * 1000,ms,该时间范围内：代码段完成 或 超出该时间范围 返回并继续向下执行
if (Seed_Current > 0.2m)
{
return(false);
}
//刷新状态
Refresh_All_Status();
//返回True
return(true);
}
//状态刷新
private void Refresh_All_Status()
{
//读取Seed电流
Initial.Laser_Operation_00.Read("00", "12");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 2))
{
Seed1_Current.Text = ((decimal)BitConverter.ToUInt16(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte, 0) / 100m).ToString();
}
//读取Amp1电流
Initial.Laser_Operation_00.Read("01", "12");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 2))
{
Amp1_Current.Text = ((decimal)BitConverter.ToUInt16(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte, 0) / 100m).ToString();
}
//读取Amp2电流
Initial.Laser_Operation_00.Read("02", "12");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 2))
{
Amp2_Current.Text = ((decimal)BitConverter.ToUInt16(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte, 0) / 100m).ToString();
}
//读取PEC功率值
Initial.Laser_Operation_00.Read("00", "55");
//if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 2)) Laser_Watt_Set_Value.Text = Laser_Watt_Cal.Percent_To_Watt(((decimal)BitConverter.ToUInt16(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte, 0) / 10m)).ToString();
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 2))
{
Laser_Watt_Set_Value.Text = ((decimal)BitConverter.ToUInt16(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte, 0) / 10m).ToString();
}
//读取PRF频率值
Initial.Laser_Operation_00.Read("00", "21");
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 3))
{
Laser_Frequence_Set_Value.Text = ((decimal)BitConverter.ToUInt32(new byte[] { Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte[0], Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte[1], Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte[2], 0x00 }, 0) / 1000m).ToString();
}
//读取状态
Initial.Laser_Operation_00.Read("00", "0F");
byte Status = 0x00;
if (!(Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte == null) && (Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length == 5))
{
Status = Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte[Initial.Laser_Operation_00.Resolve_Rec.Rec_Byte.Length - 1];
}
//PowerOn
if (Bit_Value.GetBitValue(Status, 0))
{
ChangeKeyColor("PowerOn", Color.Green);
}
else
{
ChangeKeyColor("PowerOn", Color.Red);
}
//Shuter Enabled
if (Bit_Value.GetBitValue(Status, 1))
{
ChangeKeyColor("Shutter Enabled", Color.Green);
}
else
{
ChangeKeyColor("Shutter Enabled", Color.Red);
}
//Key Switch
if (Bit_Value.GetBitValue(Status, 2))
{
ChangeKeyColor("Key Switch On", Color.Green);
}
else
{
ChangeKeyColor("Key Switch On", Color.Red);
}
//LDD On
if (Bit_Value.GetBitValue(Status, 3))
{
ChangeKeyColor("LDD On", Color.Green);
}
else
{
ChangeKeyColor("LDD On", Color.Red);
}
//QSW On
if (Bit_Value.GetBitValue(Status, 4))
{
ChangeKeyColor("QSW On", Color.Green);
}
else
{
ChangeKeyColor("QSW On", Color.Red);
}
//Shutter Interlock
if (Bit_Value.GetBitValue(Status, 5))
{
ChangeKeyColor("Shutter Interlock", Color.Green);
}
else
{
ChangeKeyColor("Shutter Interlock", Color.Red);
}
//LDD Interlock
if (Bit_Value.GetBitValue(Status, 6))
{
ChangeKeyColor("LDD Interlock", Color.Green);
}
else
{
ChangeKeyColor("LDD Interlock", Color.Red);
}
}
