/// <summary>
/// Get the string for log output.
/// </summary>
/// <param name="obj">Structure that you want to convert to a string</param>
/// <returns>String for log output</returns>
public static StringBuilder ConvertToLogString(LJV7IF_GET_BATCH_PROFILE_RSP rsp)
{
StringBuilder sb = new StringBuilder();
// Profile information of the profile obtained
sb.AppendLine(string.Format(@" CurrentBatchNo : {0}", rsp.dwCurrentBatchNo));
sb.AppendLine(string.Format(@" CurrentBatchProfCnt : {0}", rsp.dwCurrentBatchProfCnt));
sb.AppendLine(string.Format(@" OldestBatchNo : {0}", rsp.dwOldestBatchNo));
sb.AppendLine(string.Format(@" OldestBatchProfCnt : {0}", rsp.dwOldestBatchProfCnt));
sb.AppendLine(string.Format(@" GetBatchNo : {0}", rsp.dwGetBatchNo));
sb.AppendLine(string.Format(@" GetBatchProfCnt : {0}", rsp.dwGetBatchProfCnt));
sb.AppendLine(string.Format(@" GetBatchTopProfNo : {0}", rsp.dwGetBatchTopProfNo));
sb.AppendLine(string.Format(@" GetProfCnt : {0}", rsp.byGetProfCnt));
sb.Append(string.Format(@" CurrentBatchCommited : {0}", rsp.byCurrentBatchCommited));
return(sb);
}
internal static extern int LJV7IF_GetBatchProfile(int lDeviceId, ref LJV7IF_GET_BATCH_PROFILE_REQ pReq, ref LJV7IF_GET_BATCH_PROFILE_RSP pRsp, ref LJV7IF_PROFILE_INFO pProfileInfo, IntPtr pdwBatchData, uint dwDataSize);
/// <summary>
/// "GetBatchProfile" button clicked.
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void btnGetBatchProfile_Click(object sender, EventArgs e)
{
_sendCommand = SendCommand.GetBatchProfile;
using (GetBatchProfileForm getBatchProfileForm = new GetBatchProfileForm())
{
if (DialogResult.OK == getBatchProfileForm.ShowDialog())
{
_deviceData[_currentDeviceId].ProfileData.Clear();
_deviceData[_currentDeviceId].MeasureData.Clear();
// Set the command function
LJV7IF_GET_BATCH_PROFILE_REQ req = getBatchProfileForm.Req;
LJV7IF_GET_BATCH_PROFILE_RSP rsp = new LJV7IF_GET_BATCH_PROFILE_RSP();
LJV7IF_PROFILE_INFO profileInfo = new LJV7IF_PROFILE_INFO();
uint oneDataSize = GetOneProfileDataSize();
uint allDataSize = oneDataSize * getBatchProfileForm.Req.byGetProfCnt;
int[] profileData = new int[allDataSize / Marshal.SizeOf(typeof(int))];
using (PinnedObject pin = new PinnedObject(profileData))
{
// Send the command
int rc = NativeMethods.LJV7IF_GetBatchProfile(_currentDeviceId, ref req, ref rsp, ref profileInfo, pin.Pointer, allDataSize);
// @Point
// # When reading all the profiles from a single batch, the specified number of profiles may not be read.
// # To read the remaining profiles after the first set of profiles have been read,
// set the specification method (byPosMode)to 0x02, specify the batch number (dwGetBatchNo),
// and then set the number to start reading profiles from (dwGetProfNo) and the number of profiles to read (byGetProfCnt) to values
// that specify a range of profiles that have not been read to read the profiles in order.
// # For the basic code, see "btnGetBatchProfileEx_Click."
// Result output
AddLogResult(rc, Resources.SID_GET_BATCH_PROFILE);
if (rc == (int)Rc.Ok)
{
// Response data display
AddLog(Utility.ConvertToLogString(rsp).ToString());
AddLog(Utility.ConvertToLogString(profileInfo).ToString());
AnalyzeProfileData((int)rsp.byGetProfCnt, ref profileInfo, profileData);
// Profile export
if (DataExporter.ExportOneProfile(_deviceData[_currentDeviceId].ProfileData.ToArray(), 0, _txtboxProfileFilePath.Text))
{
AddLog(@"###Saved!!");
}
}
}
}
}
}
/// <summary>
/// "Get high-speed mode batch profiles" button clicked
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
/// <remarks>
/// Read one batch worth of committed profiles that have been acquired with batch measurement in high-speed mode.
/// </remarks>
private void btnGetBatchProfileEx_Click(object sender, EventArgs e)
{
// Specify the target batch to get.
LJV7IF_GET_BATCH_PROFILE_REQ req = new LJV7IF_GET_BATCH_PROFILE_REQ();
req.byTargetBank = (byte)ProfileBank.Active;
req.byPosMode = (byte)BatchPos.Commited;
req.dwGetBatchNo = 0;
req.dwGetProfNo = 0;
req.byGetProfCnt = byte.MaxValue;
req.byErase = 0;
LJV7IF_GET_BATCH_PROFILE_RSP rsp = new LJV7IF_GET_BATCH_PROFILE_RSP();
LJV7IF_PROFILE_INFO profileInfo = new LJV7IF_PROFILE_INFO();
int profileDataSize = Define.MAX_PROFILE_COUNT +
(Marshal.SizeOf(typeof(LJV7IF_PROFILE_HEADER)) + Marshal.SizeOf(typeof(LJV7IF_PROFILE_FOOTER))) / Marshal.SizeOf(typeof(int));
int[] receiveBuffer = new int[profileDataSize * req.byGetProfCnt];
using (ProgressForm progressForm = new ProgressForm())
{
Cursor.Current = Cursors.WaitCursor;
progressForm.Status = Status.Communicating;
progressForm.Show(this);
progressForm.Refresh();
List<ProfileData> profileDatas = new List<ProfileData>();
// Get profiles
using (PinnedObject pin = new PinnedObject(receiveBuffer))
{
Rc rc = (Rc)NativeMethods.LJV7IF_GetBatchProfile(Define.DEVICE_ID, ref req, ref rsp, ref profileInfo, pin.Pointer,
(uint)(receiveBuffer.Length * Marshal.SizeOf(typeof(int))));
// @Point
// # When reading all the profiles from a single batch, the specified number of profiles may not be read.
// # To read the remaining profiles after the first set of profiles have been read, set the specification method (byPosMode)to 0x02,
// specify the batch number (dwGetBatchNo), and then set the number to start reading profiles from (dwGetProfNo) and
// the number of profiles to read (byGetProfCnt) to values that specify a range of profiles that have not been read to read the profiles in order.
// # In more detail, this process entails:
// * First configure req as listed below and call this function again.
// byPosMode = LJV7IF_BATCH_POS_SPEC
// dwGetBatchNo = batch number that was read
// byGetProfCnt = Profile number of unread in the batch
// * Furthermore, if all profiles in the batch are not read,update the starting position for reading profiles (req.dwGetProfNo) and
// the number of profiles to read (req.byGetProfCnt), and then call LJV7IF_GetBatchProfile again. (Repeat this process until all the profiles have been read.)
if (!CheckReturnCode(rc)) return;
// Output the data of each profile
int unitSize = ProfileData.CalculateDataSize(profileInfo);
for (int i = 0; i < rsp.byGetProfCnt; i++)
{
profileDatas.Add(new ProfileData(receiveBuffer, unitSize * i, profileInfo));
}
// Get all profiles within the batch.
req.byPosMode = (byte)BatchPos.Spec;
req.dwGetBatchNo = rsp.dwGetBatchNo;
do
{
// Update the get profile position
req.dwGetProfNo = rsp.dwGetBatchTopProfNo + rsp.byGetProfCnt;
req.byGetProfCnt = (byte)Math.Min((uint)(byte.MaxValue), (rsp.dwCurrentBatchProfCnt - req.dwGetProfNo));
rc = (Rc)NativeMethods.LJV7IF_GetBatchProfile(Define.DEVICE_ID, ref req, ref rsp, ref profileInfo, pin.Pointer,
(uint)(receiveBuffer.Length * Marshal.SizeOf(typeof(int))));
if (!CheckReturnCode(rc)) return;
for (int i = 0; i < rsp.byGetProfCnt; i++)
{
profileDatas.Add(new ProfileData(receiveBuffer, unitSize * i, profileInfo));
}
} while (rsp.dwGetBatchProfCnt != (rsp.dwGetBatchTopProfNo + rsp.byGetProfCnt));
}
progressForm.Status = Status.Saving;
progressForm.Refresh();
// Save the file
SaveProfile(profileDatas, _txtSavePath.Text);
}
}
internal static extern int LJV7IF_GetBatchProfile(int lDeviceId, ref LJV7IF_GET_BATCH_PROFILE_REQ pReq,
ref LJV7IF_GET_BATCH_PROFILE_RSP pRsp, ref LJV7IF_PROFILE_INFO pProfileInfo,
IntPtr pdwBatchData, uint dwDataSize);
/// <summary>
/// Get the string for log output.
/// </summary>
/// <param name="obj">Structure that you want to convert to a string</param>
/// <returns>String for log output</returns>
public static StringBuilder ConvertToLogString(LJV7IF_GET_BATCH_PROFILE_RSP rsp)
{
StringBuilder sb = new StringBuilder();
// Profile information of the profile obtained
sb.AppendLine(string.Format(@" CurrentBatchNo : {0}", rsp.dwCurrentBatchNo));
sb.AppendLine(string.Format(@" CurrentBatchProfCnt : {0}", rsp.dwCurrentBatchProfCnt));
sb.AppendLine(string.Format(@" OldestBatchNo : {0}", rsp.dwOldestBatchNo));
sb.AppendLine(string.Format(@" OldestBatchProfCnt : {0}", rsp.dwOldestBatchProfCnt));
sb.AppendLine(string.Format(@" GetBatchNo : {0}", rsp.dwGetBatchNo));
sb.AppendLine(string.Format(@" GetBatchProfCnt : {0}", rsp.dwGetBatchProfCnt));
sb.AppendLine(string.Format(@" GetBatchTopProfNo : {0}", rsp.dwGetBatchTopProfNo));
sb.AppendLine(string.Format(@" GetProfCnt : {0}", rsp.byGetProfCnt));
sb.Append(string.Format (@" CurrentBatchCommited : {0}", rsp.byCurrentBatchCommited));
return sb;
}