public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
// This method is called by Inventor when it loads the addin.
// The AddInSiteObject provides access to the Inventor Application object.
// The FirstTime flag indicates if the addin is loaded for the first time.
// Initialize AddIn members.
m_inventorApplication = addInSiteObject.Application;
// TODO: Add ApplicationAddInServer.Activate implementation.
// e.g. event initialization, command creation etc.
int largeIconSize = 0;
if (m_inventorApplication.UserInterfaceManager.InterfaceStyle == InterfaceStyleEnum.kRibbonInterface)
{
largeIconSize = 32;
}
else
{
largeIconSize = 24;
}
ControlDefinitions controlDefs = m_inventorApplication.CommandManager.ControlDefinitions;
stdole.IPictureDisp smallPicture1 = AxHostConverter.ImageToPictureDisp(new Icon(@"Resources\Icon1.ico").ToBitmap());
stdole.IPictureDisp largePicture1 = AxHostConverter.ImageToPictureDisp(new Icon(@"Resources\Icon1.ico").ToBitmap());
m_TreeViewBrowser = controlDefs.AddButtonDefinition("HierarchyPane", "BrowserSample:HierarchyPane", CommandTypesEnum.kNonShapeEditCmdType, m_ClientId, null, null, smallPicture1, largePicture1);
m_TreeViewBrowser.OnExecute += new ButtonDefinitionSink_OnExecuteEventHandler(m_TreeViewBrowser_OnExecute);
stdole.IPictureDisp smallPicture2 = AxHostConverter.ImageToPictureDisp(new Icon(@"Resources\Icon2.ico").ToBitmap());
stdole.IPictureDisp largePicture2 = AxHostConverter.ImageToPictureDisp(new Icon(@"Resources\Icon2.ico").ToBitmap());
m_ActiveXBrowser = controlDefs.AddButtonDefinition("ActiveXPane", "BrowserSample:ActiveXPane", CommandTypesEnum.kNonShapeEditCmdType, m_ClientId, null, null, smallPicture2, largePicture2);
m_ActiveXBrowser.OnExecute += new ButtonDefinitionSink_OnExecuteEventHandler(m_ActiveXBrowser_OnExecute);
stdole.IPictureDisp smallPicture3 = AxHostConverter.ImageToPictureDisp(new Icon(@"Resources\Icon3.ico").ToBitmap());
stdole.IPictureDisp largePicture3 = AxHostConverter.ImageToPictureDisp(new Icon(@"Resources\Icon3.ico").ToBitmap());
m_DoBrowserEvents = controlDefs.AddButtonDefinition("DoBrowserEvents", "BrowserSample:DoBrowserEvents", CommandTypesEnum.kNonShapeEditCmdType, m_ClientId, null, null, smallPicture3, largePicture3);
m_DoBrowserEvents.OnExecute += new ButtonDefinitionSink_OnExecuteEventHandler(m_DoBrowserEvents_OnExecute);
// Get the assembly ribbon.
Inventor.Ribbon partRibbon = m_inventorApplication.UserInterfaceManager.Ribbons["Part"];
// Get the "Part" tab.
Inventor.RibbonTab partTab = partRibbon.RibbonTabs[1];
Inventor.RibbonPanel partPanel = partTab.RibbonPanels[1];
partPanel.CommandControls.AddButton(m_TreeViewBrowser, true);
partPanel.CommandControls.AddButton(m_DoBrowserEvents);
partPanel.CommandControls.AddButton(m_ActiveXBrowser);
}
public static RibbonPanel CreateRibbonPanel(string buttonPlace, string idTabTools, string panelName, string displayName, ButtonDefinition buttonDefinition)
{
string classId = "{" + AddInGlobal.ClassId + "}";
Ribbon ribbon = AddInGlobal.InventorApp.UserInterfaceManager.Ribbons[buttonPlace];
Inventor.RibbonTab ribbonTab = ribbon.RibbonTabs[idTabTools];
Inventor.RibbonPanel ribbonPanel = ribbonTab.RibbonPanels.OfType <Inventor.RibbonPanel>()
.SingleOrDefault(rp => rp.InternalName == panelName)
?? ribbonTab.RibbonPanels.Add(
"Search 3D Models", "Search 3D Models", classId);
ribbonPanel.CommandControls.AddButton(buttonDefinition, true);
return(ribbonPanel);
}
private void CreateUserInterface()
{
// Get a reference to the UserInterfaceManager object.
Inventor.UserInterfaceManager UIManager = m_inventorApplication.UserInterfaceManager;
// Get the zero doc ribbon.
Inventor.Ribbon zeroRibbon = UIManager.Ribbons["Part"];
// Get the getting started tab.
Inventor.RibbonTab startedTab = zeroRibbon.RibbonTabs["id_TabModel"];
// Get the new features panel.
Inventor.RibbonPanel newFeaturesPanel = startedTab.RibbonPanels["id_PanelP_ModelModify"];
// Add a button to the panel, using the previously created button definition.
newFeaturesPanel.CommandControls.AddButton(m_buttonDef, true);
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
// This method is called by Inventor when it loads the addin.
// The AddInSiteObject provides access to the Inventor Application object.
// The FirstTime flag indicates if the addin is loaded for the first time.
// Initialize AddIn members.
m_inventorApplication = addInSiteObject.Application;
// Add event handlers
m_AppEvents = m_inventorApplication.ApplicationEvents;
// TODO: Add ApplicationAddInServer.Activate implementation.
// e.g. event initialization, command creation etc.
// Define the buttons on ribbons
Inventor.UserInterfaceManager UIManager = m_inventorApplication.UserInterfaceManager;
// Define ControlDefinition (Button on the ribbon panel)
ControlDefinitions controlDefs = m_inventorApplication.CommandManager.ControlDefinitions;
// SPECIFICATION BUTTON
// Define Command
string CommandID = "SpecificationCmd";
try
{
// try to get the existing command definition
SpecificationCommand = (Inventor.ButtonDefinition)controlDefs[CommandID];
}
catch
{
// or create it
IPictureDisp SmallPicture = (Inventor.IPictureDisp)PictureDispConverter.ToIPictureDisp(AutoSpecification.Properties.Resources.SimpleIcon16);
IPictureDisp LargePicture = (Inventor.IPictureDisp)PictureDispConverter.ToIPictureDisp(AutoSpecification.Properties.Resources.SimpleIcon32);
SpecificationCommand = controlDefs.AddButtonDefinition(
"Создание спецификаций на агрегат", CommandID,
CommandTypesEnum.kEditMaskCmdType,
Guid.NewGuid().ToString(),
"Автоспецификации",
"Создание спецификаций на агрегат",
SmallPicture,
LargePicture, ButtonDisplayEnum.kNoTextWithIcon);
}
// register the method that will be executed
SpecificationCommand.OnExecute += new Inventor.ButtonDefinitionSink_OnExecuteEventHandler(SpecificationCommand_OnExecute);
// add buttons to ribbon
if (firstTime)
{
UserInterfaceManager userInterfaceManager = m_inventorApplication.UserInterfaceManager;
if (userInterfaceManager.InterfaceStyle == InterfaceStyleEnum.kRibbonInterface)
{
// Assembly ribbon
// 1. Access the Assebly ribbon
Inventor.Ribbon ribbonPart = userInterfaceManager.Ribbons["Assembly"];
// 2. Get Assemble tab
Inventor.RibbonTab tabSampleBlog = ribbonPart.RibbonTabs["id_TabAssemble"];
// 3. Create panel
Inventor.RibbonPanel pnlMyCommands = tabSampleBlog.RibbonPanels.Add("Спецификация", "id_Panel_AssemblyAutoSpecification", Guid.NewGuid().ToString());
// 4. Add Button to Panel
pnlMyCommands.CommandControls.AddButton(SpecificationCommand, true, false);
//// Part Ribbon (SheetMetalTab)
//// 1. Access the Part ribbon
//ribbonPart = userInterfaceManager.Ribbons["Part"];
//// 2. Get Part tab
//tabSampleBlog = ribbonPart.RibbonTabs["id_TabSheetMetal"];
//// 3. Create panel
//pnlMyCommands = tabSampleBlog.RibbonPanels.Add("Макросы", "id_Panel_SheetMetalReplacePart", Guid.NewGuid().ToString());
//// 4. Add Button to Panel
//pnlMyCommands.CommandControls.AddButton(ReplacePartCommand, true, false);
//pnlMyCommands.CommandControls.AddSeparator();
//pnlMyCommands.CommandControls.AddButton(ExportDXFCommand, true, false);
//pnlMyCommands.CommandControls.AddButton(BendTechnologyCommand, true, false);
//// Part Ribbon (ModelTab)
//// 2. Get Part tab
//tabSampleBlog = ribbonPart.RibbonTabs["id_TabModel"];
//// 3. Create panel
//pnlMyCommands = tabSampleBlog.RibbonPanels.Add("Макросы", "id_Panel_ModelReplacePart", Guid.NewGuid().ToString());
//// 4. Add Button to Panel
//pnlMyCommands.CommandControls.AddButton(ReplacePartCommand, true, false);
////pnlMyCommands.CommandControls.AddSeparator();
////pnlMyCommands.CommandControls.AddButton(ExportDXFCommand, true, false);
////pnlMyCommands.CommandControls.AddButton(BendTechnologyCommand, true, false);
//// Drawing Ribbon (PlaceViewsTab)
//// 1. Access the Part ribbon
//ribbonPart = userInterfaceManager.Ribbons["Drawing"];
//// 2. Get Part tab
//tabSampleBlog = ribbonPart.RibbonTabs["id_TabPlaceViews"];
//// 3. Create panel
//pnlMyCommands = tabSampleBlog.RibbonPanels.Add("Макросы", "id_Panel_PlaceViewsReplacePart", Guid.NewGuid().ToString());
//// 4. Add Button to Panel
//pnlMyCommands.CommandControls.AddButton(ExportPDFCommand, true, false);
//pnlMyCommands.CommandControls.AddButton(TranslateToENCommand, true, false);
//pnlMyCommands.CommandControls.AddSeparator();
//pnlMyCommands.CommandControls.AddButton(FramePartsListCommand, true, false);
//// Drawing Ribbon (TabAnnotateESKD)
//// 2. Get Part tab
//tabSampleBlog = ribbonPart.RibbonTabs["id_TabAnnotateESKD"];
//// 3. Create panel
//pnlMyCommands = tabSampleBlog.RibbonPanels.Add("Макросы", "id_Panel_AnnotateESKDReplacePart", Guid.NewGuid().ToString());
//// 4. Add Button to Panel
//pnlMyCommands.CommandControls.AddButton(ExportPDFCommand, true, false);
//pnlMyCommands.CommandControls.AddButton(TranslateToENCommand, true, false);
//pnlMyCommands.CommandControls.AddSeparator();
//pnlMyCommands.CommandControls.AddButton(FramePartsListCommand, true, false);
}
}
}