/// <summary>
/// creation of a parts list. The parts list is placed at the
/// top right corner of the border if one exists, else it is placed
/// at the top right corner of the sheet.
/// To run this sample, have a drawing document open.
/// The active sheet in the drawing should have at least
/// one drawing view and the first drawing view on the sheet
/// should not be a draft view.
/// </summary>
/// <remarks></remarks>
public void CreatePartsList()
{
// Set a reference to the drawing document.
// This assumes a drawing document is active.
DrawingDocument oDrawDoc = (DrawingDocument)_InvApplication.ActiveDocument;
//Set a reference to the active sheet.
Sheet oSheet = oDrawDoc.ActiveSheet;
// Set a reference to the first drawing view on
// the sheet. This assumes the first drawing
// view on the sheet is not a draft view.
DrawingView oDrawingView = oSheet.DrawingViews[1];
// Set a reference to th sheet's border
Inventor.Border oBorder = oSheet.Border;
Point2d oPlacementPoint = null;
if ((oBorder != null))
{
// A border exists. The placement point
// is the top-right corner of the border.
oPlacementPoint = oBorder.RangeBox.MaxPoint;
}
else
{
// There is no border. The placement point
// is the top-right corner of the sheet.
oPlacementPoint = _InvApplication.TransientGeometry.CreatePoint2d(oSheet.Width, oSheet.Height);
}
// Create the parts list.
PartsList oPartsList = oSheet.PartsLists.Add(oDrawingView, oPlacementPoint);
}
/// <summary>
/// creation of hole tables in a drawing.
/// Select a drawing view that contains holes and run the following sample
/// </summary>
/// <remarks></remarks>
public void CreateHoleTables()
{
// Set a reference to the drawing document.
// This assumes a drawing document is active.
DrawingDocument oDrawDoc = (DrawingDocument)_InvApplication.ActiveDocument;
// Set a reference to the active sheet.
Sheet oActiveSheet = oDrawDoc.ActiveSheet;
// Set a reference to the drawing view.
// This assumes that a drawing view is selected.
DrawingView oDrawingView = oDrawDoc.SelectSet[1];
// Create origin indicator if it has not been already created.
if (!oDrawingView.HasOriginIndicator)
{
// Create point intent to anchor the origin to.
GeometryIntent oDimIntent = null;
Point2d oPointIntent = null;
// Get the first curve on the view
DrawingCurve oCurve = oDrawingView.get_DrawingCurves()[1];
// Check if it has a strt point
oPointIntent = oCurve.StartPoint;
if (oPointIntent == null)
{
// Else use the center point
oPointIntent = oCurve.CenterPoint;
}
oDimIntent = oActiveSheet.CreateGeometryIntent(oCurve, oPointIntent);
oDrawingView.CreateOriginIndicator(oDimIntent);
}
Point2d oPlacementPoint = null;
// Set a reference to th sheet's border
Inventor.Border oBorder = oActiveSheet.Border;
if ((oBorder != null))
{
// A border exists. The placement point
// is the top-left corner of the border.
oPlacementPoint = _InvApplication.TransientGeometry.CreatePoint2d(oBorder.RangeBox.MinPoint.X, oBorder.RangeBox.MaxPoint.Y);
}
else
{
// There is no border. The placement point
// is the top-left corner of the sheet.
oPlacementPoint = _InvApplication.TransientGeometry.CreatePoint2d(0, oActiveSheet.Height);
}
// Create a 'view' hole table
// This hole table includes all holes as specified by the active hole table style
HoleTable oViewHoleTable = default(HoleTable);
oViewHoleTable = oActiveSheet.HoleTables.Add(oDrawingView, oPlacementPoint);
oPlacementPoint.X = oActiveSheet.Width / 2;
// Create a 'feature type' hole table
// This hole table includes specified hole types only
HoleTable oFeatureHoleTable = oActiveSheet.HoleTables.AddByFeatureType(oDrawingView, oPlacementPoint, true, true, true, true, false, false, false);
//add a new row
// get the model document
Document oModelDoc = oDrawingView.ReferencedDocumentDescriptor.ReferencedDocument;
HoleFeature oHoleF = null;
if (oModelDoc.DocumentType == DocumentTypeEnum.kAssemblyDocumentObject)
{
AssemblyDocument oRefAssDoc = (AssemblyDocument)oModelDoc;
AssemblyComponentDefinition oAssDef = oRefAssDoc.ComponentDefinition;
if (oAssDef.Features.HoleFeatures.Count > 0)
{
//as a demo: get the first hole feature
oHoleF = oAssDef.Features.HoleFeatures[1];
}
}
else if (oModelDoc.DocumentType == DocumentTypeEnum.kPartDocumentObject)
{
PartDocument oRefPartDoc = (PartDocument)oModelDoc;
PartComponentDefinition oPartDef = oRefPartDoc.ComponentDefinition;
if (oPartDef.Features.HoleFeatures.Count > 0)
{
//as a demo: get the first hole feature
oHoleF = oPartDef.Features.HoleFeatures[1];
}
}
// add a new row to the hole table
if ((oHoleF != null))
{
DrawingCurvesEnumerator oHoleCurves = oDrawingView.get_DrawingCurves(oHoleF);
if (oHoleCurves.Count > 0)
{
oFeatureHoleTable.HoleTableRows.Add(oHoleCurves[1]);
}
}
}
