/// <summary>
/// load the transactions into the grid
/// </summary>
/// <param name="ALedgerNumber"></param>
/// <param name="ABatchNumber"></param>
/// <param name="AJournalNumber"></param>
/// <param name="ACurrencyCode"></param>
/// <param name="AFromBatchTab"></param>
/// <param name="ABatchStatus"></param>
/// <param name="AJournalStatus"></param>
/// <returns>True if new GL transactions were loaded, false if transactions had been loaded already.</returns>
public bool LoadTransactions(Int32 ALedgerNumber,
Int32 ABatchNumber,
Int32 AJournalNumber,
string ACurrencyCode,
bool AFromBatchTab = false,
string ABatchStatus = MFinanceConstants.BATCH_UNPOSTED,
string AJournalStatus = MFinanceConstants.BATCH_UNPOSTED)
{
TFrmStatusDialog dlgStatus = null;
bool DifferentBatchSelected = false;
FLoadCompleted = false;
FBatchRow = GetBatchRow();
FJournalRow = GetJournalRow();
if ((FBatchRow == null) || (FJournalRow == null))
{
return false;
}
//FBatchNumber and FJournalNumber may have already been set outside
// so need to reset to previous value
if ((txtBatchNumber.Text.Length > 0) && (FBatchNumber.ToString() != txtBatchNumber.Text))
{
FBatchNumber = Int32.Parse(txtBatchNumber.Text);
}
if ((txtJournalNumber.Text.Length > 0) && (FJournalNumber.ToString() != txtJournalNumber.Text))
{
FJournalNumber = Int32.Parse(txtJournalNumber.Text);
}
bool FirstRun = (FLedgerNumber != ALedgerNumber);
bool BatchChanged = (FBatchNumber != ABatchNumber);
bool BatchStatusChanged = (!BatchChanged && (FBatchStatus != ABatchStatus));
bool JournalChanged = (BatchChanged || (FJournalNumber != AJournalNumber));
bool JournalStatusChanged = (!JournalChanged && (FJournalStatus != AJournalStatus));
bool CurrencyChanged = (FTransactionCurrency != ACurrencyCode);
if (FirstRun)
{
FLedgerNumber = ALedgerNumber;
}
if (BatchChanged)
{
FBatchNumber = ABatchNumber;
}
if (BatchStatusChanged)
{
FBatchStatus = ABatchStatus;
}
if (JournalChanged)
{
FJournalNumber = AJournalNumber;
}
if (JournalStatusChanged)
{
FJournalStatus = AJournalStatus;
}
if (CurrencyChanged)
{
FTransactionCurrency = ACurrencyCode;
}
FIsUnposted = (FBatchRow.BatchStatus == MFinanceConstants.BATCH_UNPOSTED);
if (FirstRun)
{
InitialiseControls();
}
try
{
this.Cursor = Cursors.WaitCursor;
//Check if the same batch and journal is selected, so no need to apply filter
if (!FirstRun
&& !BatchChanged
&& !JournalChanged
&& !BatchStatusChanged
&& !JournalStatusChanged
&& !CurrencyChanged
&& (FMainDS.ATransaction.DefaultView.Count > 0))
{
//Same as previously selected batch and journal
//Need to reconnect FPrev in some circumstances
if (FPreviouslySelectedDetailRow == null)
{
DataRowView rowView = (DataRowView)grdDetails.Rows.IndexToDataSourceRow(FPrevRowChangedRow);
if (rowView != null)
{
FPreviouslySelectedDetailRow = (GLBatchTDSATransactionRow)(rowView.Row);
}
}
if (FIsUnposted && (GetSelectedRowIndex() > 0))
{
if (AFromBatchTab)
{
SelectRowInGrid(GetSelectedRowIndex());
}
else
{
GetDetailsFromControls(FPreviouslySelectedDetailRow);
}
}
FLoadCompleted = true;
return false;
}
// Different batch selected
DifferentBatchSelected = true;
bool requireControlSetup = (FLedgerNumber == -1) || (FTransactionCurrency != ACurrencyCode);
//Handle dialog
dlgStatus = new TFrmStatusDialog(FPetraUtilsObject.GetForm());
if (FShowStatusDialogOnLoad == true)
{
dlgStatus.Show();
FShowStatusDialogOnLoad = false;
dlgStatus.Heading = String.Format(Catalog.GetString("Batch {0}, Journal {1}"), ABatchNumber, AJournalNumber);
dlgStatus.CurrentStatus = Catalog.GetString("Loading transactions ...");
}
FLedgerNumber = ALedgerNumber;
FBatchNumber = ABatchNumber;
FJournalNumber = AJournalNumber;
FTransactionNumber = -1;
FTransactionCurrency = ACurrencyCode;
FBatchStatus = ABatchStatus;
FJournalStatus = AJournalStatus;
FPreviouslySelectedDetailRow = null;
grdDetails.SuspendLayout();
//Empty grids before filling them
grdDetails.DataSource = null;
grdAnalAttributes.DataSource = null;
// This sets the main part of the filter but excluding the additional items set by the user GUI
// It gets the right sort order
SetTransactionDefaultView();
//Set the Analysis attributes filter as well
FAnalysisAttributesLogic = new TAnalysisAttributes(FLedgerNumber, FBatchNumber, FJournalNumber);
FAnalysisAttributesLogic.SetTransAnalAttributeDefaultView(FMainDS);
FMainDS.ATransAnalAttrib.DefaultView.AllowNew = false;
//Load from server if necessary
if (FMainDS.ATransaction.DefaultView.Count == 0)
{
dlgStatus.CurrentStatus = Catalog.GetString("Requesting transactions from server...");
FMainDS.Merge(TRemote.MFinance.GL.WebConnectors.LoadATransactionATransAnalAttrib(ALedgerNumber, ABatchNumber, AJournalNumber));
}
else if (FMainDS.ATransAnalAttrib.DefaultView.Count == 0) // just in case transactions have been loaded in a separate process without analysis attributes
{
dlgStatus.CurrentStatus = Catalog.GetString("Requesting analysis attributes from server...");
FMainDS.Merge(TRemote.MFinance.GL.WebConnectors.LoadATransAnalAttribForJournal(ALedgerNumber, ABatchNumber, AJournalNumber));
}
FContainsSystemGenerated = false;
// check if any of the rows are system generated (i.e. reversals)
foreach (DataRowView rv in FMainDS.ATransaction.DefaultView)
{
if (((ATransactionRow)rv.Row).SystemGenerated)
{
FContainsSystemGenerated = true;
break;
}
}
// We need to call this because we have not called ShowData(), which would have set it. This differs from the Gift screen.
grdDetails.DataSource = new DevAge.ComponentModel.BoundDataView(FMainDS.ATransaction.DefaultView);
// Now we set the full filter
dlgStatus.CurrentStatus = Catalog.GetString("Selecting the records...");
FFilterAndFindObject.ApplyFilter();
dlgStatus.CurrentStatus = Catalog.GetString("Configuring analysis attributes ...");
if (grdAnalAttributes.Columns.Count == 1)
{
grdAnalAttributes.SpecialKeys = GridSpecialKeys.Default | GridSpecialKeys.Tab;
FcmbAnalAttribValues = new SourceGrid.Cells.Editors.ComboBox(typeof(string));
FcmbAnalAttribValues.EnableEdit = true;
FcmbAnalAttribValues.EditableMode = EditableMode.Focus;
grdAnalAttributes.AddTextColumn(Catalog.GetString("Value"),
FMainDS.ATransAnalAttrib.Columns[ATransAnalAttribTable.GetAnalysisAttributeValueDBName()], 150,
FcmbAnalAttribValues);
FcmbAnalAttribValues.Control.SelectedValueChanged += new EventHandler(this.AnalysisAttributeValueChanged);
grdAnalAttributes.Columns[0].Width = 99;
}
grdAnalAttributes.DataSource = new DevAge.ComponentModel.BoundDataView(FMainDS.ATransAnalAttrib.DefaultView);
grdAnalAttributes.SetHeaderTooltip(0, Catalog.GetString("Type"));
grdAnalAttributes.SetHeaderTooltip(1, Catalog.GetString("Value"));
// if this form is readonly or batch is posted, then we need all account and cost centre codes, because old codes might have been used
bool ActiveOnly = false; //(this.Enabled && FIsUnposted && !FContainsSystemGenerated);
if (requireControlSetup || (FActiveOnly != ActiveOnly))
{
FActiveOnly = ActiveOnly;
//Load all analysis attribute values
if (FCacheDS == null)
{
dlgStatus.CurrentStatus = Catalog.GetString("Loading analysis attributes ...");
FCacheDS = TRemote.MFinance.GL.WebConnectors.LoadAAnalysisAttributes(FLedgerNumber, FActiveOnly);
}
SetupExtraGridFunctionality();
dlgStatus.CurrentStatus = Catalog.GetString("Initialising accounts and cost centres ...");
// We suppress change detection because these are the correct values
// Then initialise our combo boxes for the correct account codes and cost centres
bool prevSuppressChangeDetection = FPetraUtilsObject.SuppressChangeDetection;
FPetraUtilsObject.SuppressChangeDetection = true;
TFinanceControls.InitialiseAccountList(ref cmbDetailAccountCode, FLedgerNumber,
true, false, ActiveOnly, false, ACurrencyCode, true);
TFinanceControls.InitialiseCostCentreList(ref cmbDetailCostCentreCode, FLedgerNumber, true, false, ActiveOnly, false);
FPetraUtilsObject.SuppressChangeDetection = prevSuppressChangeDetection;
cmbDetailCostCentreCode.AttachedLabel.Text = TFinanceControls.SELECT_VALID_COST_CENTRE;
cmbDetailAccountCode.AttachedLabel.Text = TFinanceControls.SELECT_VALID_ACCOUNT;
}
UpdateTransactionTotals();
grdDetails.ResumeLayout();
FLoadCompleted = true;
ShowData();
SelectRowInGrid(1);
ShowDetails(); //Needed because of how currency is handled
UpdateChangeableStatus();
UpdateRecordNumberDisplay();
FFilterAndFindObject.SetRecordNumberDisplayProperties();
//Check for missing analysis attributes and their values
if (FIsUnposted && (grdDetails.Rows.Count > 1))
{
string updatedTransactions = string.Empty;
dlgStatus.CurrentStatus = Catalog.GetString("Checking analysis attributes ...");
FAnalysisAttributesLogic.ReconcileTransAnalysisAttributes(FMainDS, FCacheDS, out updatedTransactions);
if (updatedTransactions.Length > 0)
{
//Remove trailing comma
updatedTransactions = updatedTransactions.Remove(updatedTransactions.Length - 2);
MessageBox.Show(String.Format(Catalog.GetString(
"Analysis Attributes have been updated in transaction(s): {0}.{1}{1}Remeber to set their values before posting!"),
updatedTransactions,
Environment.NewLine),
"Analysis Attributes",
MessageBoxButtons.OK,
MessageBoxIcon.Information);
FPetraUtilsObject.SetChangedFlag();
}
}
RefreshAnalysisAttributesGrid();
}
catch (Exception ex)
{
TLogging.Log(String.Format("Method:{0} - Unexpected error!{1}{1}{2}",
Utilities.GetMethodSignature(),
Environment.NewLine,
ex.Message));
throw ex;
}
finally
{
if (dlgStatus != null)
{
dlgStatus.Close();
}
this.Cursor = Cursors.Default;
}
return DifferentBatchSelected;
}
/// <summary>
/// load the gifts into the grid
/// </summary>
/// <param name="ALedgerNumber"></param>
/// <param name="ABatchNumber"></param>
/// <param name="ABatchStatus"></param>
/// <param name="AForceLoadFromServer">Set to true to get data from the server even though it is apparently the current batch number and status</param>
/// <returns>True if gift transactions were loaded from server, false if transactions had been loaded already.</returns>
public bool LoadGifts(Int32 ALedgerNumber, Int32 ABatchNumber, string ABatchStatus, bool AForceLoadFromServer = false)
{
//Set key flags
bool FirstGiftTransLoad = (FLedgerNumber == -1);
bool SameCurrentBatch =
((FLedgerNumber == ALedgerNumber) && (FBatchNumber == ABatchNumber) && (FBatchStatus == ABatchStatus) && !AForceLoadFromServer);
//Read key fields
FBatchRow = GetBatchRow();
if ((FBatchRow == null) && (GetAnyBatchRow(ABatchNumber) == null))
{
MessageBox.Show(String.Format("Cannot load transactions for Gift Batch {0} as the batch is not currently loaded!", ABatchNumber));
return false;
}
FLedgerNumber = ALedgerNumber;
FBatchNumber = ABatchNumber;
FBatchStatus = ABatchStatus;
FBatchUnposted = (FBatchStatus == MFinanceConstants.BATCH_UNPOSTED);
FBatchCurrencyCode = FBatchRow.CurrencyCode;
FBatchMethodOfPayment = FBatchRow.MethodOfPaymentCode;
if (FirstGiftTransLoad)
{
InitialiseControls();
}
UpdateCurrencySymbols(FBatchRow.CurrencyCode);
//Check if the same batch is selected, so no need to apply filter
if (SameCurrentBatch)
{
//Same as previously selected and we have not been asked to force a full refresh
if (FBatchUnposted && (GetSelectedRowIndex() > 0))
{
if (FGLEffectivePeriodChanged)
{
//Just in case for the currently selected row, the date field has not been updated
FGLEffectivePeriodChanged = false;
GetSelectedDetailRow().DateEntered = FBatchRow.GlEffectiveDate;
dtpDateEntered.Date = FBatchRow.GlEffectiveDate;
}
//Same as previously selected
if (GetSelectedRowIndex() > 0)
{
GetDetailsFromControls(GetSelectedDetailRow());
}
}
UpdateControlsProtection();
if (FBatchUnposted
&& ((FBatchCurrencyCode != FBatchRow.CurrencyCode)
|| (FBatchExchangeRateToBase != FBatchRow.ExchangeRateToBase)))
{
UpdateBaseAmount(false);
}
return false;
}
//New set of transactions to be loaded
TFrmStatusDialog dlgStatus = new TFrmStatusDialog(FPetraUtilsObject.GetForm());
if (FShowStatusDialogOnLoad == true)
{
dlgStatus.Show();
FShowStatusDialogOnLoad = false;
dlgStatus.Heading = String.Format(Catalog.GetString("Batch {0}"), ABatchNumber);
dlgStatus.CurrentStatus = Catalog.GetString("Loading transactions ...");
}
FGiftTransactionsLoaded = false;
FSuppressListChanged = true;
//Apply new filter
FPreviouslySelectedDetailRow = null;
grdDetails.DataSource = null;
// if this form is readonly, then we need all codes, because old (inactive) codes might have been used
if (FirstGiftTransLoad || (FActiveOnly == (ViewMode || !FBatchUnposted)))
{
FActiveOnly = !(ViewMode || !FBatchUnposted);
dlgStatus.CurrentStatus = Catalog.GetString("Initialising controls ...");
try
{
//Without this, the Save button enables even for Posted batches!
FPetraUtilsObject.SuppressChangeDetection = true;
TFinanceControls.InitialiseMotivationGroupList(ref cmbDetailMotivationGroupCode, FLedgerNumber, FActiveOnly);
TFinanceControls.InitialiseMotivationDetailList(ref cmbDetailMotivationDetailCode, FLedgerNumber, FActiveOnly);
TFinanceControls.InitialiseMethodOfGivingCodeList(ref cmbDetailMethodOfGivingCode, FActiveOnly);
TFinanceControls.InitialiseMethodOfPaymentCodeList(ref cmbDetailMethodOfPaymentCode, FActiveOnly);
TFinanceControls.InitialisePMailingList(ref cmbDetailMailingCode, FActiveOnly);
}
finally
{
FPetraUtilsObject.SuppressChangeDetection = false;
}
}
// This sets the incomplete filter but does check the panel enabled state
ShowData();
// This sets the main part of the filter but excluding the additional items set by the user GUI
// It gets the right sort order
SetGiftDetailDefaultView();
// only load from server if there are no transactions loaded yet for this batch
// otherwise we would overwrite transactions that have already been modified
if (FMainDS.AGiftDetail.DefaultView.Count == 0)
{
dlgStatus.CurrentStatus = Catalog.GetString("Requesting transactions from server ...");
LoadGiftDataForBatch(ALedgerNumber, ABatchNumber);
}
//Check if need to update batch period in each gift
if (FBatchUnposted)
{
dlgStatus.CurrentStatus = Catalog.GetString("Updating batch period ...");
((TFrmGiftBatch)ParentForm).GetBatchControl().UpdateBatchPeriod();
}
// Now we set the full filter
FFilterAndFindObject.ApplyFilter();
UpdateRecordNumberDisplay();
FFilterAndFindObject.SetRecordNumberDisplayProperties();
SelectRowInGrid(1);
UpdateControlsProtection();
FSuppressListChanged = false;
dlgStatus.CurrentStatus = Catalog.GetString("Updating totals for the batch ...");
UpdateTotals();
if ((FPreviouslySelectedDetailRow != null) && (FBatchUnposted))
{
bool disableSave = (FBatchRow.RowState == DataRowState.Unchanged && !FPetraUtilsObject.HasChanges);
if (disableSave && FPetraUtilsObject.HasChanges && !DataUtilities.DataRowColumnsHaveChanged(FBatchRow))
{
FPetraUtilsObject.DisableSaveButton();
}
}
FGiftTransactionsLoaded = true;
dlgStatus.Close();
return true;
}
