public void test_set_invalid_ID_values_in_Obj()
{
stdout.print("--- ID field types (set invalid ID values): ---\n");
Archetype bad_arch = new Archetype("arch_to_set_invalid_ID_fields", 0);
bad_arch.add_field("invalid_ID", FieldType.ID);
bad_arch.add_field("invalid_LIST_ID", FieldType.LIST_ID);
Obj bad_obj = new Obj(bad_arch, "obj_to_get_invalid_ID_fields", 0);
bad_obj["invalid_ID"].iv = 9999; // Known invalid ID -- should fail (does fail, OK)
stdout.print("bad_obj[invalid_ID] = {0}\n", bad_obj["invalid_ID"].ToString());
bad_obj["invalid_LIST_ID"].ilist = new List <int> {
9999, 8888, 7777
}; // Known invalid IDs -- should fail (does fail, OK)
stdout.print("bad_obj[invalid_LIST_ID] = {0}\n", bad_obj["invalid_LIST_ID"].ToString());
// The add_field() method is available to control the type which would otherwise be auto-vivified:
bad_obj.add_field("obj_added_ID_field", FieldType.ID); // Without this, the field becomes an INT upon auto-vivify
bad_obj["obj_added_ID_field"].iv = 999; // 999 is known-invalid ID -- this fails because we called add_field() earlier
int ID = bad_obj["obj_added_ID_field"].iv;
stdout.print("bad_obj[obj_added_ID_field].type = {0}\n", bad_obj["obj_added_ID_field"].type); // prints ID, would print INT if we had not done add_field() earlier
stdout.print("ID={0,3}, bad_obj[].iv={1}\n", ID, bad_obj["obj_added_ID_field"].iv); // Expect ID=999, obj1[].iv=999 (if we had gotten this far)
}
public void create_some_archetypes()
{
Archetype aa = new Archetype("first_test_archetype", 0);
Archetype bb = new Archetype("arch_2", 0);
Archetype cc = new Archetype("arch_3", 0);
Archetype dd = new Archetype("arch_4", 0);
Archetype ee = new Archetype("various_tests", 0);
aa.add_field("int_2a", FieldType.INT);
aa.add_field("string_2a", FieldType.STRING);
aa.add_field("decimal_2a", FieldType.DECIMAL);
aa.add_field("ID_2a", FieldType.ID);
//
stdout.print("Scalars, 2-arg add_field() with the default default value:\n");
stdout.print(aa.ToString());
stdout.print("\n");
bb.add_field("int_field", FieldType.INT, 42);
bb.add_field("string_field", FieldType.STRING, "abc");
bb.add_field("decimal_field", FieldType.DECIMAL, 144.99M);
bb.add_field("ID_field", FieldType.ID, 0);
//
stdout.print("Scalars, 3-arg add_field() with specified default value:\n");
stdout.print(bb.ToString());
stdout.print("\n");
cc.add_field("int_list", FieldType.LIST_INT);
cc.add_field("string_list", FieldType.LIST_STRING);
cc.add_field("decimal_list", FieldType.LIST_DECIMAL);
cc.add_field("ID_list", FieldType.LIST_ID);
//
stdout.print("List types, 2-arg add_field() (empty lists):\n");
stdout.print(cc.ToString());
stdout.print("\n");
// Can the syntax of the list-args at the end be improved? Is it important to do so, given the nature of the typical caller of this?
// If the caller was a human typing this stuff, might change to multiple methods names, to get rid of the 2nd arg. But caller is the parser, or editor code.
dd.add_field("int_list", FieldType.LIST_INT, new List<int> { 1, 2, 3} );
dd.add_field("string_list", FieldType.LIST_STRING, new List<string> { "abc", "def", "hij" } );
dd.add_field("decimal_list", FieldType.LIST_DECIMAL, new List<decimal> { 1.01M, 2.02M, 3.03M } );
dd.add_field("ID_list", FieldType.LIST_ID, new List<int> { 42, 69, 144 } );
stdout.print("List types, 3-arg add_field() (non-empty lists):\n");
stdout.print(dd.ToString());
stdout.print("\n");
//aa["int_2"] = new ArchetypeField("int_2", FieldType.INT, 123);
//aa["str_2"] = new ArchetypeField("str_2", FieldType.STRING, "xyz");
//aa.remove_field("int_field");
//aa.remove_field("string_field");
//aa["int_list"].default_value.ilist = new List<int> { 99, 98, 97, 96 };
//stdout.print("Various tests:\n");
//stdout.print(ee.ToString());
//stdout.print("\n");
}
public void create_some_objs()
{
Archetype aa = new Archetype("first_test_archetype", 7);
// W00t, it looks like the FieldTempNull approach got rid of the need for these manual add_field() calls
//aa.add_field("int_field", FieldType.INT);
//aa.add_field("string_field", FieldType.STRING);
//aa.add_field("decimal_field", FieldType.DECIMAL);
//aa.add_field("list_int_field", FieldType.LIST_INT);
//aa.add_field("list_string_field", FieldType.LIST_STRING);
//aa.add_field("list_decimal_field", FieldType.LIST_DECIMAL);
Obj obj1 = new Obj(aa, "first_test_obj", 0);
stdout.print("--- Scalar field types: ---\n");
int ii = obj1["int_field"].iv;
obj1["int_field"].iv = 99;
stdout.print("ii={0}, obj1[].iv={1}\n", ii, obj1["int_field"].iv); // expect ii=0, obj1[].iv=99
string ss = obj1["string_field"].sv;
obj1["string_field"].sv = "def hij";
stdout.print("ss='{0}', obj1[].sv='{1}'\n", ss, obj1["string_field"].sv); // expect ss='', obj1[].sv="def hij"
decimal dd = obj1["decimal_field"].dv;
obj1["decimal_field"].dv = 123.456M;
stdout.print("dd={0}, obj1[].dv={1}\n", dd, obj1["decimal_field"].dv); // expect dd=0, obj1[].dv=123.456
stdout.print("\n");
//if (false) {
// // Debug output related to the inheritance-of-interface bug found in FieldID and FieldListID:
// FieldID argh = new FieldID();
// stdout.print("FieldID : GetType={0}, type={1}\n", argh.GetType(), argh.type); // Returns FieldID and ID -- CORRECT
// IObjField xzzy = new FieldID();
// stdout.print("IObjField, manual cast upon use : GetType={0}, type={1}\n", ((FieldID) xzzy).GetType(), ((FieldID) xzzy).type); // Returns FieldID and ID -- CORRECT, have to manually cast upon use??? In the name of all that is static typing, WHY???
// IObjField horg = (FieldID) new FieldID();
// stdout.print("IObjField, manual cast upon assignment: GetType={0}, type={1}\n", horg.GetType(), horg.type); // Returns FieldID and INT -- WRONG, why??? (cast did not make the difference)
// IObjField slar = new FieldID();
// stdout.print("IObjField, no cast : GetType={0}, type={1}\n", slar.GetType(), slar.type); // Returns FieldID and INT -- WRONG, why???
// // (The why is due to "implementation of interfaces" not being inherited;
// // thus FieldID and FieldListID needed to explicitly indicate that they implement IObjField
// stdout.print("\n");
//}
aa.add_field("ID_field_1", FieldType.ID);
//stdout.print("aa[ID_field_1].type = {0}\n", aa["ID_field_1"].type); // Prints ID
//stdout.print("obj1[ID_field_1].type = {0}\n", obj1["ID_field_1"].type); // Prints ID (but not if FieldID does not explicitly specify implmentation of IObjField)
//stdout.print("\n");
obj1["ID_field_1"].iv = 7; // 7 is known valid ID
int ID1 = obj1["ID_field_1"].iv;
stdout.print("ID={0,3}, obj1[].iv={1}\n", ID1, obj1["ID_field_1"].iv); // Expect ID=7, obj1[].iv=7
stdout.print("\n");
stdout.print("--- List field types: ---\n");
obj1["list_int_field"].ilist = new List <int> {
1, 2, 3
};
obj1["list_int_field"].ilist.Add(42);
obj1["list_string_field"].slist = new List <string> {
"abc", "def", "hij"
};
obj1["list_string_field"].slist.Add("xyz");
obj1["list_decimal_field"].dlist = new List <decimal> {
1.1M, 2.2M, 3.3M
};
obj1["list_decimal_field"].dlist.Add(999.999M);
stdout.print("list_int_field = {0}\n", obj1["list_int_field"].ToString());
stdout.print("list_string_field = {0}\n", obj1["list_string_field"].ToString());
stdout.print("list_decimal_field = {0}\n", obj1["list_decimal_field"].ToString());
stdout.print("\n");
Archetype a1 = new Archetype("foo_arch", 100);
Obj o1 = new Obj(a1, "foo_o1", 101);
Archetype a2 = new Archetype("bar_arch", 200);
Obj o2 = new Obj(a2, "bar_o2", 201);
Obj o3 = new Obj(a2, "bar_o3", 202);
Obj o4 = new Obj(a2, "bar_o4", 203);
obj1["list_ID_field"].ilist = new List <int> {
100, 101, 200, 201
};
obj1["list_ID_field"].ilist.Add(a1.ID); // ID == 100, Dupe Archetype ID in list is valid
obj1["list_ID_field"].ilist.Add(o3.ID); // ID == 202
obj1["list_ID_field"].ilist.Add(o1.ID); // ID == 101, Dupe Obj ID in list is valid
obj1["list_ID_field"].ilist.Add(o4.ID); // ID == 203
stdout.print("list_ID_field = {0}\n", obj1["list_ID_field"].ToString()); // Expect [100, 101, 200, 201, 100, 202, 101, 203]
}
public void create_some_archetypes()
{
Archetype aa = new Archetype("first_test_archetype", 0);
Archetype bb = new Archetype("arch_2", 0);
Archetype cc = new Archetype("arch_3", 0);
Archetype dd = new Archetype("arch_4", 0);
Archetype ee = new Archetype("various_tests", 0);
aa.add_field("int_2a", FieldType.INT);
aa.add_field("string_2a", FieldType.STRING);
aa.add_field("decimal_2a", FieldType.DECIMAL);
aa.add_field("ID_2a", FieldType.ID);
//
stdout.print("Scalars, 2-arg add_field() with the default default value:\n");
stdout.print(aa.ToString());
stdout.print("\n");
bb.add_field("int_field", FieldType.INT, 42);
bb.add_field("string_field", FieldType.STRING, "abc");
bb.add_field("decimal_field", FieldType.DECIMAL, 144.99M);
bb.add_field("ID_field", FieldType.ID, 0);
//
stdout.print("Scalars, 3-arg add_field() with specified default value:\n");
stdout.print(bb.ToString());
stdout.print("\n");
cc.add_field("int_list", FieldType.LIST_INT);
cc.add_field("string_list", FieldType.LIST_STRING);
cc.add_field("decimal_list", FieldType.LIST_DECIMAL);
cc.add_field("ID_list", FieldType.LIST_ID);
//
stdout.print("List types, 2-arg add_field() (empty lists):\n");
stdout.print(cc.ToString());
stdout.print("\n");
// Can the syntax of the list-args at the end be improved? Is it important to do so, given the nature of the typical caller of this?
// If the caller was a human typing this stuff, might change to multiple methods names, to get rid of the 2nd arg. But caller is the parser, or editor code.
dd.add_field("int_list", FieldType.LIST_INT, new List <int> {
1, 2, 3
});
dd.add_field("string_list", FieldType.LIST_STRING, new List <string> {
"abc", "def", "hij"
});
dd.add_field("decimal_list", FieldType.LIST_DECIMAL, new List <decimal> {
1.01M, 2.02M, 3.03M
});
dd.add_field("ID_list", FieldType.LIST_ID, new List <int> {
42, 69, 144
});
stdout.print("List types, 3-arg add_field() (non-empty lists):\n");
stdout.print(dd.ToString());
stdout.print("\n");
//aa["int_2"] = new ArchetypeField("int_2", FieldType.INT, 123);
//aa["str_2"] = new ArchetypeField("str_2", FieldType.STRING, "xyz");
//aa.remove_field("int_field");
//aa.remove_field("string_field");
//aa["int_list"].default_value.ilist = new List<int> { 99, 98, 97, 96 };
//stdout.print("Various tests:\n");
//stdout.print(ee.ToString());
//stdout.print("\n");
}
public void create_some_objs()
{
Archetype aa = new Archetype("first_test_archetype", 7);
// W00t, it looks like the FieldTempNull approach got rid of the need for these manual add_field() calls
//aa.add_field("int_field", FieldType.INT);
//aa.add_field("string_field", FieldType.STRING);
//aa.add_field("decimal_field", FieldType.DECIMAL);
//aa.add_field("list_int_field", FieldType.LIST_INT);
//aa.add_field("list_string_field", FieldType.LIST_STRING);
//aa.add_field("list_decimal_field", FieldType.LIST_DECIMAL);
Obj obj1 = new Obj(aa, "first_test_obj", 0);
stdout.print("--- Scalar field types: ---\n");
int ii = obj1["int_field"].iv;
obj1["int_field"].iv = 99;
stdout.print("ii={0}, obj1[].iv={1}\n", ii, obj1["int_field"].iv); // expect ii=0, obj1[].iv=99
string ss = obj1["string_field"].sv;
obj1["string_field"].sv = "def hij";
stdout.print("ss='{0}', obj1[].sv='{1}'\n", ss, obj1["string_field"].sv); // expect ss='', obj1[].sv="def hij"
decimal dd = obj1["decimal_field"].dv;
obj1["decimal_field"].dv = 123.456M;
stdout.print("dd={0}, obj1[].dv={1}\n", dd, obj1["decimal_field"].dv); // expect dd=0, obj1[].dv=123.456
stdout.print("\n");
//if (false) {
// // Debug output related to the inheritance-of-interface bug found in FieldID and FieldListID:
// FieldID argh = new FieldID();
// stdout.print("FieldID : GetType={0}, type={1}\n", argh.GetType(), argh.type); // Returns FieldID and ID -- CORRECT
// IObjField xzzy = new FieldID();
// stdout.print("IObjField, manual cast upon use : GetType={0}, type={1}\n", ((FieldID) xzzy).GetType(), ((FieldID) xzzy).type); // Returns FieldID and ID -- CORRECT, have to manually cast upon use??? In the name of all that is static typing, WHY???
// IObjField horg = (FieldID) new FieldID();
// stdout.print("IObjField, manual cast upon assignment: GetType={0}, type={1}\n", horg.GetType(), horg.type); // Returns FieldID and INT -- WRONG, why??? (cast did not make the difference)
// IObjField slar = new FieldID();
// stdout.print("IObjField, no cast : GetType={0}, type={1}\n", slar.GetType(), slar.type); // Returns FieldID and INT -- WRONG, why???
// // (The why is due to "implementation of interfaces" not being inherited;
// // thus FieldID and FieldListID needed to explicitly indicate that they implement IObjField
// stdout.print("\n");
//}
aa.add_field("ID_field_1", FieldType.ID);
//stdout.print("aa[ID_field_1].type = {0}\n", aa["ID_field_1"].type); // Prints ID
//stdout.print("obj1[ID_field_1].type = {0}\n", obj1["ID_field_1"].type); // Prints ID (but not if FieldID does not explicitly specify implmentation of IObjField)
//stdout.print("\n");
obj1["ID_field_1"].iv = 7; // 7 is known valid ID
int ID1 = obj1["ID_field_1"].iv;
stdout.print("ID={0,3}, obj1[].iv={1}\n", ID1, obj1["ID_field_1"].iv); // Expect ID=7, obj1[].iv=7
stdout.print("\n");
stdout.print("--- List field types: ---\n");
obj1["list_int_field" ].ilist = new List<int> { 1, 2, 3 };
obj1["list_int_field" ].ilist.Add(42);
obj1["list_string_field" ].slist = new List<string> { "abc", "def", "hij" };
obj1["list_string_field" ].slist.Add("xyz");
obj1["list_decimal_field"].dlist = new List<decimal> { 1.1M, 2.2M, 3.3M };
obj1["list_decimal_field"].dlist.Add(999.999M);
stdout.print("list_int_field = {0}\n", obj1["list_int_field"].ToString());
stdout.print("list_string_field = {0}\n", obj1["list_string_field" ].ToString() );
stdout.print("list_decimal_field = {0}\n", obj1["list_decimal_field"].ToString() );
stdout.print("\n");
Archetype a1 = new Archetype("foo_arch", 100);
Obj o1 = new Obj(a1, "foo_o1", 101);
Archetype a2 = new Archetype("bar_arch", 200);
Obj o2 = new Obj(a2, "bar_o2", 201);
Obj o3 = new Obj(a2, "bar_o3", 202);
Obj o4 = new Obj(a2, "bar_o4", 203);
obj1["list_ID_field"].ilist = new List<int> { 100, 101, 200, 201 };
obj1["list_ID_field"].ilist.Add(a1.ID); // ID == 100, Dupe Archetype ID in list is valid
obj1["list_ID_field"].ilist.Add(o3.ID); // ID == 202
obj1["list_ID_field"].ilist.Add(o1.ID); // ID == 101, Dupe Obj ID in list is valid
obj1["list_ID_field"].ilist.Add(o4.ID); // ID == 203
stdout.print("list_ID_field = {0}\n", obj1["list_ID_field"].ToString() ); // Expect [100, 101, 200, 201, 100, 202, 101, 203]
}
public void test_set_invalid_ID_values_in_Obj()
{
stdout.print("--- ID field types (set invalid ID values): ---\n");
Archetype bad_arch = new Archetype("arch_to_set_invalid_ID_fields", 0);
bad_arch.add_field("invalid_ID", FieldType.ID);
bad_arch.add_field("invalid_LIST_ID", FieldType.LIST_ID);
Obj bad_obj = new Obj(bad_arch, "obj_to_get_invalid_ID_fields", 0);
bad_obj["invalid_ID"].iv = 9999; // Known invalid ID -- should fail (does fail, OK)
stdout.print("bad_obj[invalid_ID] = {0}\n", bad_obj["invalid_ID"].ToString());
bad_obj["invalid_LIST_ID"].ilist = new List<int> { 9999, 8888, 7777 }; // Known invalid IDs -- should fail (does fail, OK)
stdout.print("bad_obj[invalid_LIST_ID] = {0}\n", bad_obj["invalid_LIST_ID"].ToString());
// The add_field() method is available to control the type which would otherwise be auto-vivified:
bad_obj.add_field("obj_added_ID_field", FieldType.ID); // Without this, the field becomes an INT upon auto-vivify
bad_obj["obj_added_ID_field"].iv = 999; // 999 is known-invalid ID -- this fails because we called add_field() earlier
int ID = bad_obj["obj_added_ID_field"].iv;
stdout.print("bad_obj[obj_added_ID_field].type = {0}\n", bad_obj["obj_added_ID_field"].type); // prints ID, would print INT if we had not done add_field() earlier
stdout.print("ID={0,3}, bad_obj[].iv={1}\n", ID, bad_obj["obj_added_ID_field"].iv); // Expect ID=999, obj1[].iv=999 (if we had gotten this far)
}