private void ProcessBatchFiles() //(BackgroundWorker backWorker)
{
if (BatchInputFilesFolder != "")
{
string FilenameExtension = "";
string[] fileEntries = Directory.GetFiles(BatchInputFilesFolder); // "*.*", SearchOption.AllDirectories);
int totalFiles = 0; // = fileEntries.Length;
int processingFile = 0;
foreach (string fileName in fileEntries)
{
FilenameExtension = Path.GetExtension(fileName);
if (FilenameExtension == ".xml")
{
totalFiles++;
}
}
foreach (string fileName in fileEntries)
{
FilenameExtension = Path.GetExtension(fileName);
if (FilenameExtension == ".xml")
{
LoadProject(fileName);
CalcsArterial.CalcResults(Project, ref Art);
FileInputOutput2.SerializeArterialData(Project.FileName, Art);
processingFile++;
int PctProgress = (int)((Single)processingFile / totalFiles * 100);
bgwReadBatchFiles.ReportProgress(PctProgress);
}
}
}
else
{
MessageBox.Show("The input and/or output source path is empty.", "Folder Path Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
}
private void btnCalcResults_Click(object sender, EventArgs e)
{
CalcsArterial.CalcResults(Project, ref Art);
MessageBox.Show("Analysis finished!");
}
/// <summary>
/// Creates the Service Volumes for an arterial based on input parameters.
/// </summary>
/// <param name="Project"></param>
/// <param name="SerVol"></param>
/// <param name="inputsOneLane"></param>
/// <param name="inputsMultiLane"></param>
/*public static void ServiceVolsAuto(ProjectData Project, ServiceVolumes SerVol, ServiceVolumeArterialInputs
* inputsOneLane, ServiceVolumeArterialInputs inputsMultiLane)
* {
*
* float NumberOfLoops = 5 * 5; //This accounts for LOS and Lanes, does not account for volume increments; Type is float just to avoid extra cast in calculations below
* int LoopCounter = 0;
* frmMain.bgwRunServiceVolsCalcs.ReportProgress(0);
*
* ArterialData Arterial = new ArterialData();
* for (int lanes = 0; lanes < 5; lanes++) // 2,4,6,8,*
* {
* int vol = 40; // Starting volume (volume entering upstream of first intersection)
* bool threshExceeded = false;
*
* // Variable access points
*
* ServiceVolumeArterialInputs inputsForArterialCreation = inputsOneLane;
* if (lanes > 0)
* inputsForArterialCreation = inputsMultiLane;
*
* if (lanes != 4)
* Arterial = CreateArterial_FDOTSerVols.NewArterial(inputsForArterialCreation, vol, lanes + 1);
* else
* Arterial = CreateArterial_FDOTSerVols.NewArterial(inputsForArterialCreation, vol);
*
* for (int LOSlevel = 0; LOSlevel < 5; LOSlevel++) // LOS A-E
* {
* LoopCounter++;
*
* int[] ServiceVolsArray;
* do
* {
* CreateArterial_FDOTSerVols.ChangeArterialVolume(ref Arterial, vol);
* Arterial.TestSerVol = vol;
* CalcsArterial.CalcResults(Project, ref Arterial);
*
* if (!Arterial.OverCapacity)
* {
* // Check whether LOS speed threshold has been exceeded
* if (Arterial.Results.AverageSpeed < Arterial.Thresholds.Speed[LOSlevel]) // Avg. speed below LOS threshold speed
* {
* vol -= 10;
* threshExceeded = true;
* if (vol <= 0)
* {
* vol = 10;
* SerVol.PkDirVol[lanes, LOSlevel] = -1;
* SerVol.BothDirVol[lanes, LOSlevel] = -1;
* SerVol.AADT[lanes, LOSlevel] = -1;
* SerVol.Found[lanes, LOSlevel] = true;
* }
* }
* else
* {
* if (threshExceeded == false) // Threshold not exceeded, increment volume
* {
* if ((Arterial.Results.AverageSpeed - Arterial.Thresholds.Speed[LOSlevel]) > 5)
* vol += (30 * (lanes + 1) * (LOSlevel + 1));
* else
* vol += 10;
* }
* else // Threshold exceeded, record volume for LOS level
* {
* if (LOSlevel > 0)
* ServiceVolsArray = SetServiceVolumes(vol, Project.Period, Arterial.Dfactor, Arterial.Kfactor, LOSlevel, SerVol.PkDirVol[lanes, LOSlevel - 1]);
* else
* ServiceVolsArray = SetServiceVolumes(vol, Project.Period, Arterial.Dfactor, Arterial.Kfactor, LOSlevel, -1);
* SerVol.PkDirVol[lanes, LOSlevel] = ServiceVolsArray[0];
* SerVol.BothDirVol[lanes, LOSlevel] = ServiceVolsArray[1];
* SerVol.AADT[lanes, LOSlevel] = ServiceVolsArray[2];
* SerVol.Found[lanes, LOSlevel] = true;
* vol += 10; // Increment volume for start of next LOS level
* threshExceeded = false;
* }
* }
* }
* else // Check to see if there is a constraining intersection due to (v/c * PHF) > 1
* {
* vol -= 10; // Return to the previous non-capacity-constrained volume
* for (int capCheckLOSlevel = LOSlevel + 1; capCheckLOSlevel < 5; capCheckLOSlevel++) // LOS A-E
* {
* SerVol.PkDirVol[lanes, capCheckLOSlevel] = -2;
* SerVol.BothDirVol[lanes, capCheckLOSlevel] = -2;
* SerVol.AADT[lanes, capCheckLOSlevel] = -2;
* SerVol.Found[lanes, capCheckLOSlevel] = true;
* }
* if (LOSlevel > 0)
* ServiceVolsArray = SetServiceVolumes(vol, Project.Period, Arterial.Dfactor, Arterial.Kfactor, LOSlevel, SerVol.PkDirVol[lanes, LOSlevel - 1]);
* else
* ServiceVolsArray = SetServiceVolumes(vol, Project.Period, Arterial.Dfactor, Arterial.Kfactor, LOSlevel, -1);
* SerVol.PkDirVol[lanes, LOSlevel] = ServiceVolsArray[0];
* SerVol.BothDirVol[lanes, LOSlevel] = ServiceVolsArray[1];
* SerVol.AADT[lanes, LOSlevel] = ServiceVolsArray[2];
* SerVol.Found[lanes, LOSlevel] = true;
* }
* }
* while (SerVol.Found[lanes, LOSlevel] == false); //loop until service vol reached for given LOS
* if (Arterial.OverCapacity)
* {
* LoopCounter = 5 * (lanes + 1);
* frmMain.bgwRunServiceVolsCalcs.ReportProgress((int)(Math.Round(LoopCounter / NumberOfLoops * 100, 0, MidpointRounding.AwayFromZero)));
* break;
* }
* frmMain.bgwRunServiceVolsCalcs.ReportProgress((int)(Math.Round(LoopCounter / NumberOfLoops * 100, 0, MidpointRounding.AwayFromZero)));
* } // BP here to view service volumes by LOS
* } // BP here to view service volumes by number of lanes
* } // BP here to view all service volumes*/
public static void ServiceVolsAutoNew(ProjectData Project, ServiceVolumes SerVol, ServiceVolumeTableFDOT inputsOneLane, ServiceVolumeTableFDOT inputsMultiLane)
{
float NumberOfLoops = 5 * 5; //This accounts for LOS and Lanes, does not account for volume increments; Type is float just to avoid extra cast in calculations below
int LoopCounter = 0;
frmMain.bgwRunServiceVolsCalcs.ReportProgress(0);
ArterialData Arterial = new ArterialData();
for (int lanes = 0; lanes < 5; lanes++) // 2,4,6,8,*
{
int vol = 40; // Starting volume (volume entering upstream of first intersection)
bool threshExceeded = false;
// Variable access points
ServiceVolumeTableFDOT inputsForArterialCreation = inputsOneLane;
if (lanes > 0)
{
inputsForArterialCreation = inputsMultiLane;
}
if (lanes != 4)
{
Arterial = CreateArterial_FDOTSerVols.NewArterial(inputsForArterialCreation, Project.AnalMode, vol, lanes + 1);
}
else
{
Arterial = CreateArterial_FDOTSerVols.NewArterial(inputsForArterialCreation, Project.AnalMode, vol);
}
for (int LOSlevel = 0; LOSlevel < 5; LOSlevel++) // LOS A-E
{
LoopCounter++;
int[] ServiceVolsArray;
do
{
CreateArterial_FDOTSerVols.ChangeArterialVolume(ref Arterial, vol);
Arterial.TestSerVol = vol;
CalcsArterial.CalcResults(Project, ref Arterial);
if (!Arterial.OverCapacity)
{
// Check whether LOS speed threshold has been exceeded
if (Arterial.Results.AverageSpeed < Arterial.Thresholds.Speed[LOSlevel]) // Avg. speed below LOS threshold speed
{
vol -= 10;
threshExceeded = true;
if (vol <= 0)
{
vol = 10;
SerVol.PkDirVol[lanes, LOSlevel] = -1;
SerVol.BothDirVol[lanes, LOSlevel] = -1;
SerVol.AADT[lanes, LOSlevel] = -1;
SerVol.Found[lanes, LOSlevel] = true;
}
}
else
{
if (threshExceeded == false) // Threshold not exceeded, increment volume
{
if ((Arterial.Results.AverageSpeed - Arterial.Thresholds.Speed[LOSlevel]) > 5)
{
vol += (30 * (lanes + 1) * (LOSlevel + 1));
}
else
{
vol += 10;
}
}
else // Threshold exceeded, record volume for LOS level
{
//vol += 10;
if (LOSlevel > 0)
{
ServiceVolsArray = SetServiceVolumes(vol, Project.Period, Arterial.Dfactor, Arterial.Kfactor, LOSlevel, SerVol.PkDirVol[lanes, LOSlevel - 1]);
}
else
{
ServiceVolsArray = SetServiceVolumes(vol, Project.Period, Arterial.Dfactor, Arterial.Kfactor, LOSlevel, -1);
}
SerVol.PkDirVol[lanes, LOSlevel] = ServiceVolsArray[0];
SerVol.BothDirVol[lanes, LOSlevel] = ServiceVolsArray[1];
SerVol.AADT[lanes, LOSlevel] = ServiceVolsArray[2];
SerVol.Found[lanes, LOSlevel] = true;
vol += 10; // Increment volume for start of next LOS level
threshExceeded = false;
}
}
}
else // Check to see if there is a constraining intersection due to (v/c * PHF) > 1
{
vol -= 10; // Return to the previous non-capacity-constrained volume
for (int capCheckLOSlevel = LOSlevel + 1; capCheckLOSlevel < 5; capCheckLOSlevel++) // LOS A-E
{
SerVol.PkDirVol[lanes, capCheckLOSlevel] = -2;
SerVol.BothDirVol[lanes, capCheckLOSlevel] = -2;
SerVol.AADT[lanes, capCheckLOSlevel] = -2;
SerVol.Found[lanes, capCheckLOSlevel] = true;
}
if (LOSlevel > 0)
{
ServiceVolsArray = SetServiceVolumes(vol, Project.Period, Arterial.Dfactor, Arterial.Kfactor, LOSlevel, SerVol.PkDirVol[lanes, LOSlevel - 1]);
}
else
{
ServiceVolsArray = SetServiceVolumes(vol, Project.Period, Arterial.Dfactor, Arterial.Kfactor, LOSlevel, -1);
}
SerVol.PkDirVol[lanes, LOSlevel] = ServiceVolsArray[0];
SerVol.BothDirVol[lanes, LOSlevel] = ServiceVolsArray[1];
SerVol.AADT[lanes, LOSlevel] = ServiceVolsArray[2];
SerVol.Found[lanes, LOSlevel] = true;
}
}while (SerVol.Found[lanes, LOSlevel] == false); //loop until service vol reached for given LOS
threshExceeded = false;
if (Arterial.OverCapacity)
{
LoopCounter = 5 * (lanes + 1);
frmMain.bgwRunServiceVolsCalcs.ReportProgress((int)(Math.Round(LoopCounter / NumberOfLoops * 100, 0, MidpointRounding.AwayFromZero)));
break;
}
frmMain.bgwRunServiceVolsCalcs.ReportProgress((int)(Math.Round(LoopCounter / NumberOfLoops * 100, 0, MidpointRounding.AwayFromZero)));
} // BP here to view service volumes by LOS
} // BP here to view service volumes by number of lanes
} // BP here to view all service volumes
