public HndzFloor(Double thickness, HndzProfile profile, HndzStorey storey = null, Double baseOffset = 0) :
this(null, profile, storey, baseOffset)
{
FloorThickness = thickness;
ExtrusionLine = new HndzLine(new Point3d(profile.Centroid.X, profile.Centroid.Y, storey.Elevation - FloorThickness + baseOffset),
new Point3d(profile.Centroid.X, profile.Centroid.Y, storey.Elevation + baseOffset));
}
public HndzStairLanding(Double thickness, HndzProfile profile, HndzStorey storey, Double finishFloorThickness, Double baseOffset = 0) :
this(null, profile, storey, baseOffset)
{
SlabThickness = thickness;
ExtrusionLine = new HndzLine(new Point3d(profile.Centroid.X, profile.Centroid.Y, storey.Elevation -
SlabThickness - finishFloorThickness + baseOffset),
new Point3d(profile.Centroid.X, profile.Centroid.Y, storey.Elevation - finishFloorThickness + baseOffset));
}
protected HndzExtrudedElement(string name, string description, HndzLine extrusionLine, HndzStorey storey, double baseOffset,
HndzProductDiscipline discipline) :
base(name, description, storey, baseOffset, discipline)
{
LocalId = ++Id;
//ExtrusionDirection = dir;
//ExtrusionLength = extrusionLength;
ExtrusionLine = extrusionLine;
}
public HndzCurtainWallStandardCase(String name, String description, HndzStorey storey, Double baseOffset = 0,
Line baseLine = default(Line), Double unconnectedHeight = 0, Double wallThickness = 0, ICollection <HndzWallOpening> wallOpenings = null) :
base(name, description, unconnectedHeight, wallThickness, storey, baseOffset, wallOpenings)
{
BaseLine = baseLine;
Point3d StartPoint = new Point3d(BaseLine.PointAt(.5).X, BaseLine.PointAt(.5).Y, BaseOffset);
Point3d EndPoint = new Point3d(StartPoint.X, StartPoint.Y, unconnectedHeight + BaseOffset);
ExtrusionLine = new HndzLine(new Line(StartPoint, EndPoint));
}
protected HndzWall(string name, string description, HndzLine extrusionLine, Double wallThickness,
HndzStorey storey = null, double baseOffset = 0, ICollection <HndzWallOpening> wallOpenings = null) :
base(name, description, extrusionLine, storey, baseOffset)
{
if (ExtrusionLine != null)
{
UnconnectedHeight = ExtrusionLine.RhinoLine.Length;
}
WallThickness = wallThickness;
}
/// <summary>
/// Constructor takes extrusion line and base storey. To use this the building must have a storey above the current storey
/// </summary>
/// <param name="name">Beam Name</param>
/// <param name="description">Beam Description</param>
/// <param name="extrusionLine">line represents start and end point of the beam and its direction</param>
/// <param name="storey">Base Storey</param>
/// <param name="baseOffset">Base Offset from base storey Elevation value</param>
/// <param name="discipline">Discipline as Enum e.g. Arch, Structure ... etc</param>
/// <param name="profile">Beam Profile</param>
public HndzBeamStandardCase(String name, String description, HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, Double baseOffset = 0) :
base(name, description, extrusionLine, profile, storey, baseOffset)
{
//to use this, the building must have a storey above the current storey
double beamTopElevation = this.BuildingStorey.StoreyHeight;
Point3d extStartPoint = new Point3d(extrusionLine.RhinoLine.From.X, extrusionLine.RhinoLine.From.Y, beamTopElevation);
Point3d extEndPoint = new Point3d(extrusionLine.RhinoLine.To.X, extrusionLine.RhinoLine.To.Y, beamTopElevation);
Line extLine = new Line(extStartPoint, extEndPoint);
Profile = profile;
}
public HndzOpening(string name, string description, HndzProfile profile = null, HndzLine extrusionLine = null, HndzExtrudedElement relatedProduct = null, Double baseOffset = 0) : base()
{
Name = name;
Description = description;
Profile = profile;
ExtrusionLine = extrusionLine;
RelatedProduct = relatedProduct;
BaseOffset = baseOffset;
if (RelatedProduct != null)
{
base.BuildingStorey = RelatedProduct.BuildingStorey;
}
AddToAssociatedProduct();
base.AddToAssociatedStorey();
}
public HndzCurtainWallArc(String name, String description, HndzStorey storey, Double baseOffset = 0,
Arc baseArc = default(Arc), Double unconnectedHeight = 0, Double wallThickness = 0,
ICollection <HndzWallOpening> wallOpenings = null) :
base(name, description, unconnectedHeight, wallThickness, storey, baseOffset, wallOpenings)
{
//TODO: MS: convert this into hndzProfile
BaseArc = baseArc;
Point3d mid = GetPointOnArc(BaseArc, .5);
Point3d StartPoint = new Point3d(mid.X, mid.Y, BaseOffset);
Point3d EndPoint = new Point3d(mid.X, mid.Y, unconnectedHeight + BaseOffset);
//Point3d StartPoint = new Point3d(BaseArc.MidPoint.X, BaseArc.MidPoint.Y, BaseOffset);
//Point3d EndPoint = new Point3d(StartPoint.X, StartPoint.Y, unconnectedHeight + BaseOffset);
ExtrusionLine = new HndzLine(new Line(StartPoint, EndPoint));
}
public HndzWallStandardCase(String name, String description, HndzStorey storey, Double baseOffset = 0,
Line baseLine = default(Line), Double unconnectedHeight = 0, Double wallThickness = 0, ICollection <HndzWallOpening> wallOpenings = null) :
base(name, description, unconnectedHeight, wallThickness, storey, baseOffset, wallOpenings)
{
BaseLine = baseLine;
//MS:
//Step1: Create HndzProfile
var myWallRec = new Rectangle3d(Plane.WorldXY, wallThickness, BaseLine.Length);
var orientationVector = new Vector2d(BaseLine.UnitTangent.X, BaseLine.UnitTangent.Y);
var myHndzProfile = new HndzRectangularProfile(myWallRec, orientationVector);
Profile = myHndzProfile;
//Step2: Create Extrusion Line
Point3d StartPoint = new Point3d(BaseLine.PointAt(.5).X, BaseLine.PointAt(.5).Y, BaseOffset + storey.Elevation);
Point3d EndPoint = new Point3d(StartPoint.X, StartPoint.Y, unconnectedHeight + BaseOffset + storey.Elevation);
ExtrusionLine = new HndzLine(new Line(StartPoint, EndPoint));
}
/// <summary>
/// main constructor
/// </summary>
/// <param name="profile">constant profile along column extrude direction</param>
/// <param name="name">name for the column</param>
/// <param name="description">description for the column</param>
/// <param name="height">column actual height(in Z-direction)</param>
/// <param name="storey">storey which contains the column base elevation</param>
/// <param name="topLevel">storey which intersects with column top elevation</param>
/// <param name="baseOffset">offset from base</param>
/// <param name="topOffset">offset from top</param>
public HndzBracingStandrdCase(string name, string description, HndzProfile profile, HndzLine extrusionLine, HndzStorey storey = null,
double baseOffset = 0) :
base(name, description, extrusionLine, profile, storey, baseOffset)
{
Profile = profile;
}
public HndzFloor(HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, Double baseOffset = 0) :
this(HndzResources.DefaultName, HndzResources.DefaultDescription, profile, extrusionLine, storey, baseOffset)
{
}
public HndzFloor(String name, String description, HndzProfile profile, HndzLine extrusionLine, HndzStorey storey = null, Double baseOffset = 0) :
base(name, description, extrusionLine, storey, baseOffset)
{
Profile = profile;
}
public HndzOpening(HndzProfile profile, HndzLine extrusionLine, HndzExtrudedElement relatedProduct = null,
Double baseOffset = 0) :
this(HndzResources.DefaultName, HndzResources.DefaultDescription, profile,
extrusionLine, relatedProduct, baseOffset)
{
}
public HndzArchitecturalElement(string name, string description, HndzLine extrusionLine, HndzStorey storey = null, double baseOffset = 0) :
base(name, description, extrusionLine, storey, baseOffset, HndzProductDiscipline.Architectural)
{
}
public override void AssemblePEB(SectionI columnsStartSection = null, SectionI columnsEndSection = null, SectionI beamsStartSection = null, SectionI beamsEndSection = null, SectionChannel purlinsSection = null)
{
const double FirstPurlinSpacingCL = 100;
//const double FirstPurlinSpacingEdge = 0;
//SectionI AssumedIBuiltUpSection = new SectionI("Assumed Built up I Section", 600, 250, 20, 10);
SectionChannel AssumedCSection = new SectionChannel("Assumed hotRolled C Section", 180, 80, 10, 4);
HndzISectionProfile bigProfile = new HndzISectionProfile(new SectionI("big", 1000 * 2, 500 * 2, 100 * 2, 50 * 2));
HndzISectionProfile smallProfile = new HndzISectionProfile(new SectionI("small", 1000, 500, 100, 50));
HndzITaperedProfile assumedProfileColumn = new HndzITaperedProfile(smallProfile, bigProfile, new Vector2d(1, 0));
HndzITaperedProfile assumedProfileBeam = new HndzITaperedProfile(bigProfile, smallProfile, new Vector2d(0, 1));
HndzITaperedProfile columnsTaperedProfile = null;
HndzITaperedProfile beamsTaperedProfile = null;
#region Check function parameters
if (columnsStartSection == null && columnsEndSection != null)
{
columnsTaperedProfile = new HndzITaperedProfile(new HndzISectionProfile(columnsEndSection),
new HndzISectionProfile(columnsEndSection), new Vector2d(0, 1));
}
else if (columnsEndSection == null && columnsStartSection != null)
{
columnsTaperedProfile = new HndzITaperedProfile(new HndzISectionProfile(columnsStartSection),
new HndzISectionProfile(columnsStartSection), new Vector2d(0, 1));
}
else if (columnsStartSection != null && columnsEndSection != null)
{
columnsTaperedProfile = new HndzITaperedProfile(new HndzISectionProfile(columnsStartSection),
new HndzISectionProfile(columnsEndSection), new Vector2d(0, 1));
}
else // dah law el el 2 sections b null
{
columnsTaperedProfile = assumedProfileColumn;
}
if (beamsStartSection == null && beamsEndSection != null)
{
beamsTaperedProfile = new HndzITaperedProfile(new HndzISectionProfile(beamsEndSection),
new HndzISectionProfile(beamsEndSection), new Vector2d(1, 0));
}
else if (beamsEndSection == null && beamsStartSection != null)
{
beamsTaperedProfile = new HndzITaperedProfile(new HndzISectionProfile(beamsStartSection),
new HndzISectionProfile(beamsStartSection), new Vector2d(1, 0));
}
else if (beamsStartSection != null && beamsEndSection != null)
{
beamsTaperedProfile = new HndzITaperedProfile(new HndzISectionProfile(beamsStartSection),
new HndzISectionProfile(beamsEndSection), new Vector2d(1, 0));
}
else // dah law el el 2 sections b null
{
beamsTaperedProfile = assumedProfileBeam;
}
if (purlinsSection == null)
{
purlinsSection = AssumedCSection;
}
#endregion
columnsStartSection = columnsTaperedProfile.StartProfile.I_Section;
columnsEndSection = columnsTaperedProfile.EndProfile.I_Section;
beamsStartSection = beamsTaperedProfile.StartProfile.I_Section;
beamsEndSection = beamsTaperedProfile.EndProfile.I_Section;
double beamZoffset = beamsStartSection.d / 2 + beamsStartSection.tf;//ToDo: add to beam and purlin
Frames2D = new List <HndzFrameSingleBay2D>(FramesCount);
Purlins = new List <HndzPurlinStandrdCase>();
//Girts = new List<HndzGuirt>(2);
for (int framesCounter = 0; framesCounter < FramesCount; framesCounter++)
{
HndzFrameSingleBay2D Frame = new HndzFrameSingleBay2D();
Point3d lowerLeft = new Point3d(-Width / 2, BaySpacing * framesCounter, 0);
Point3d lowerRight = new Point3d(Width / 2, BaySpacing * framesCounter, 0);
Point3d upperLeft = new Point3d(-Width / 2, BaySpacing * framesCounter, EaveHeight);
Point3d upperRight = new Point3d(Width / 2, BaySpacing * framesCounter, EaveHeight);
Point3d ridgeMid = new Point3d(0, BaySpacing * framesCounter, RidgeHeight);
////
HndzLine rColLine = new HndzLine(lowerRight, upperRight);
Frame.RightColumn = new HndzColumnStandardCase(rColLine, columnsTaperedProfile);
HndzLine lColLine = new HndzLine(lowerLeft, upperLeft);
Frame.LeftColumn = new HndzColumnStandardCase(lColLine, columnsTaperedProfile);
/////
HndzLine rBeamLine = new HndzLine(upperRight, ridgeMid);
Frame.RightBeam = new HndzBeamStandrdCase(rBeamLine, beamsTaperedProfile);
HndzLine lBeamLine = new HndzLine(upperLeft, ridgeMid);
Frame.LeftBeam = new HndzBeamStandrdCase(lBeamLine, beamsTaperedProfile);
Frame.RightSupport = new HndzSupport(HndzSupportTypeEnum.Pinned, new HndzNode(lowerRight));
Frame.LeftSupport = new HndzSupport(HndzSupportTypeEnum.Pinned, new HndzNode(lowerLeft));
Frames2D.Add(Frame);
}
double roofSlopeAngle = 1;
switch (RoofSlope)
{
case HndzRoofSlopeEnum.From1To5:
roofSlopeAngle = Math.Atan(0.2);
break;
case HndzRoofSlopeEnum.From1To10:
roofSlopeAngle = Math.Atan(0.1);
break;
case HndzRoofSlopeEnum.From1To20:
roofSlopeAngle = Math.Atan(0.05);
break;
}
//double pulinZoffset = beamsStartSection.d / 2 - beamsStartSection.tf / 2; ///////Need Revision "msh 3arf ezay bs hya kda sha8ala 7lw :D"
double pulinZoffset = /*beamsEndSection.d / 2 */ +purlinsSection.d / 2; ///////Need Revision "msh 3arf ezay bs hya kda sha8ala 7lw :D"
//double taperingDiffrence = 0.5*(beamsStartSection.d - beamsEndSection.d);
double xLeft = 0 - FirstPurlinSpacingCL;
double zLeft = RidgeHeight + pulinZoffset;
pulinZoffset = 0;
double taperingZoffsetLeft = PurlinSpacing * ((beamsStartSection.d - beamsEndSection.d) / 2) / (Frames2D.ElementAt(0).LeftBeam.ExtrusionLine.RhinoLine.Length);
taperingZoffsetLeft = 0;
do
{
Point3d startL = new Point3d(xLeft, 0, zLeft);
Point3d endL = new Point3d(xLeft, Length, zLeft);
HndzCSectionProfile assumedProfilePurlin = new HndzCSectionProfile(purlinsSection, new Vector2d(0, -1));
HndzLine purlinLine = new HndzLine(new Line(startL, endL));
Purlins.Add(new HndzPurlinStandrdCase(assumedProfilePurlin, purlinLine));
xLeft -= PurlinSpacing;
zLeft -= PurlinSpacing * Math.Tan(roofSlopeAngle) - taperingZoffsetLeft;
} while (xLeft > -Width / 2 + FirstPurlinSpacingCL && zLeft > EaveHeight + pulinZoffset);
double xRight = 0 + FirstPurlinSpacingCL;
double zRight = RidgeHeight + pulinZoffset;
do
{
Point3d startR = new Point3d(xRight, 0, zRight);
Point3d endR = new Point3d(xRight, Length, zRight);
HndzCSectionProfile assumedProfilePurlin = new HndzCSectionProfile(purlinsSection, new Vector2d(0, 1));
HndzLine purlinLine = new HndzLine(new Line(startR, endR));
Purlins.Add(new HndzPurlinStandrdCase(assumedProfilePurlin, purlinLine));
xRight += PurlinSpacing;
zRight -= PurlinSpacing * Math.Tan(roofSlopeAngle) - taperingZoffsetLeft;
} while (xRight < Width / 2 && zRight > EaveHeight + pulinZoffset);
}
protected HndzBeam(String name, String description, HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, double baseOffset = 0) :
base(name, description, extrusionLine, profile, storey, baseOffset)
{
}
public HndzStairLanding(String name, String description, HndzProfile profile, HndzLine extrusionLine, HndzStorey storey = null, Double baseOffset = 0) :
base(name, description, profile, extrusionLine, storey, baseOffset)
{
}
/// <summary>
/// Constructor takes extrusion line and base storey
/// </summary>
/// <param name="name">Column Name</param>
/// <param name="description">Column Description</param>
/// <param name="extrusionLine">line represents start and end point of the column and its direction</param>
/// <param name="storey">Base Storey</param>
/// <param name="baseOffset">Base Offset from base storey Elevation value</param>
/// <param name="discipline">Discipline as Enum e.g. Arch, Str ... etc</param>
/// <param name="profile">Column Profile</param>
public HndzColumnStandardCase(String name, String description, HndzProfile profile, HndzLine extrusionLine, HndzStorey storey = null, Double baseOffset = 0,
HndzProductDiscipline discipline = HndzProductDiscipline.Structural) :
base(name, description, extrusionLine, profile, storey, baseOffset, discipline)
{
}
protected HndzPurlin(String name, String description, HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null,
double baseOffset = 0, Vector3d direction = default(Vector3d)) :
base(name, description, extrusionLine, profile, storey, baseOffset)
{
}
protected HndzStructuralElement(string name, string description, HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, double baseOffset = 0) :
base(name, description, extrusionLine, storey, baseOffset, HndzProductDiscipline.Structural)
{
Profile = profile;
}
/// <summary>
/// our default constructor
/// </summary>
/// <param name="profile">constant profile along column extrude direction</param>
/// <param name="height">column actual height(in Z-direction)</param>
/// <param name="storey">storey which contains the column base elevation</param>
/// <param name="topLevel">storey which intersects with column top elevation</param>
/// <param name="baseOffset">offset from base</param>
/// <param name="topOffset">offset from top</param>
public HndzBracingStandrdCase(HndzProfile profile, HndzLine extrusionLine, HndzStorey storey = null, HndzStorey topLevel = null,
double baseOffset = 0, double topOffset = 0) :
this(HndzResources.DefaultName, HndzResources.DefaultDescription, profile, extrusionLine, storey, baseOffset)
{
}
} // ana msh m7tagha
#endregion
#region Constructors
protected HndzColumn(String name, String description, HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, Double baseOffset = 0,
HndzProductDiscipline discipline = HndzProductDiscipline.Structural) :
base(name, description, extrusionLine, profile, storey, baseOffset)
{
UnconnectedHeight = extrusionLine.RhinoLine.Length;
}
/// <summary>
/// Constructor takes extrusion line and base storey
/// </summary>
/// <param name="extrusionLine">line represents base point of the column and end point represents where column extrusion will end </param>
/// <param name="storey">Base Storey</param>
/// <param name="baseOffset">Base Offset from base storey Elevation value</param>
/// <param name="discipline">Discipline as Enum e.g. Arch, Str ... etc</param>
/// <param name="profile">Column Profile</param>
public HndzColumnStandardCase(HndzLine extrusionLine, HndzProfile profile, HndzStorey storey = null, Double baseOffset = 0,
HndzProductDiscipline discipline = HndzProductDiscipline.Structural) :
this(HndzResources.DefaultName, HndzResources.DefaultDescription, profile, extrusionLine, storey, baseOffset, discipline)
{
}