public DataTree <Plane> GetNexorPlanes()
{
DataTree <Plane> dt = new DataTree <Plane>();
foreach (var n in this._nexors)
{
if (n.isNexor != 0)
{
var path = new Grasshopper.Kernel.Data.GH_Path(n.idNested[0], n.idNested[1]);
dt.AddRange(n.foPl, path);
dt.Add(n.ePl, path);
dt.Add(n.fcPl_foPl, path);
dt.AddRange(n.fcPl, path);
dt.Add(n.ePl90Offset, path);
dt.Add(n.endPl0, path);
dt.Add(n.endPl1, path);
}
}
return(dt);
}
/// <summary>
/// This is the method that actually does the work.
/// </summary>
/// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param>
protected override void SolveInstance(IGH_DataAccess DA)
{
List <string> _buildingFiles = new List <string>();
List <string> _buildingBinaryFiles = new List <string>();
int _val_ = 0;
bool runIt_ = false;
DA.GetDataList(0, _buildingFiles);
DA.GetDataList(1, _buildingBinaryFiles);
DA.GetData(2, ref _val_);
DA.GetData(3, ref runIt_);
// Unwrap variables
List <FacadeVariable> variables = BuildingFacadeOutputMapping();
if (runIt_)
{
DataTree <string> fileNameTree = new DataTree <string>();
DataTree <FacadeVariable> variableTree = new DataTree <FacadeVariable>();
DataTree <double> dataTree = new DataTree <double>();
// Warning!
if (_val_ >= variables.Count)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Variable is out of range, check description of the input.");
return;
}
for (int i = 0; i < _buildingFiles.Count; i++)
{
GHD.GH_Path pth = new GHD.GH_Path(i);
try
{
string edxName = Path.GetFileNameWithoutExtension(_buildingFiles[i]);
string edtName = Path.GetFileNameWithoutExtension(_buildingBinaryFiles[i]);
if (edxName == edtName)
{
List <double> results = BuildingOutput.ParseBinBuilding(_buildingFiles[i], _buildingBinaryFiles[i], (int)variables[_val_], Direction);
fileNameTree.Add(Path.GetFileName(_buildingFiles[i]), pth);
variableTree.Add(variables[_val_], pth);
dataTree.AddRange(results, pth);
}
}
catch
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Something is wrong in output dynamic folder.\nPlease, make sure EDT length is equals to EDX length.");
continue;
}
}
DA.SetDataTree(0, fileNameTree);
DA.SetDataTree(1, variableTree);
DA.SetDataTree(2, dataTree);
}
}
/// <summary>
/// This is the method that actually does the work.
/// </summary>
/// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param>
protected override void SolveInstance(IGH_DataAccess DA)
{
List <string> _buildingFiles = new List <string>();
int _val_ = 0;
bool runIt_ = false;
DA.GetDataList(0, _buildingFiles);
DA.GetData(1, ref _val_);
DA.GetData(2, ref runIt_);
// Unwrap variables
var variables = BuildingOutputTypeMapping();
if (runIt_)
{
DataTree <string> valueTree = new DataTree <string>();
DataTree <string> dateTree = new DataTree <string>();
DataTree <string> timeTree = new DataTree <string>();
DataTree <BuldingDatVariable> variableNameTree = new DataTree <BuldingDatVariable>();
// Warning!
if (_val_ >= variables.Count)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Variable is out of range, check description of the input.");
return;
}
//TO DO: Generic class for csv method
for (int i = 0; i < _buildingFiles.Count; i++)
{
GHD.GH_Path pth = new GHD.GH_Path(i);
valueTree.AddRange(ReceptorOutput.GetValueFromCsv(_buildingFiles[i], (int)variables[_val_]), pth);
dateTree.AddRange(ReceptorOutput.GetValueFromCsv(_buildingFiles[i], (int)BuldingDatVariable.Date), pth);
timeTree.AddRange(ReceptorOutput.GetValueFromCsv(_buildingFiles[i], (int)BuldingDatVariable.Time), pth);
variableNameTree.Add(variables[_val_], pth);
}
DA.SetDataTree(0, variableNameTree);
DA.SetDataTree(1, dateTree);
DA.SetDataTree(2, timeTree);
DA.SetDataTree(3, valueTree);
}
}
/// <summary>
/// This is the method that actually does the work.
/// </summary>
/// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param>
protected override void SolveInstance(IGH_DataAccess DA)
{
// INPUT
// declaration
string _XML = String.Empty;
List <string> _tagName = new List <string>();
DA.GetData(0, ref _XML);
DA.GetDataList(1, _tagName);
// actions
XmlDocument xmlDoc = new XmlDocument();
//declare tree
DataTree <string> intTree = new DataTree <string>();
xmlDoc.LoadXml(_XML);
if (_tagName != null)
{
try
{
//set up tree
for (int i = 0; i < _tagName.Count; i++)
{
GHD.GH_Path pth = new GHD.GH_Path(i);
var innerTextData = xmlDoc.GetElementsByTagName(_tagName[i])[0].InnerText;
intTree.Add(innerTextData, pth);
}
// output
DA.SetDataTree(0, intTree);
}
catch
{
this.AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Please provide a valid keyword.");
return;
}
}
}
/// <summary>
/// This is the method that actually does the work.
/// </summary>
/// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param>
protected override void SolveInstance(IGH_DataAccess DA)
{
List <string> gridFiles = new List <string>();
List <string> gridBinaryFiles = new List <string>();
string type = GridOutputFolderType.ATMOSPHERE;
int var = 0;
int loc = 0;
bool runIt = false;
DA.GetDataList(0, gridFiles);
DA.GetDataList(1, gridBinaryFiles);
DA.GetData(2, ref type);
DA.GetData(3, ref var);
DA.GetData(4, ref loc);
DA.GetData(5, ref runIt);
GetNameOfPlaneInput();
ChangeVariableDescription(type);
if (runIt)
{
var variables = GetVariable();
int selectedVariable = 0;
object varName = null;
string report = String.Empty;
switch (type)
{
case GridOutputFolderType.ATMOSPHERE:
var atmosphere = variables[0] as List <AtmosphereOutput>;
// Warning
if (var >= atmosphere.Count)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Atmosphere variable is out of range, check description of the input.");
return;
}
selectedVariable = (int)(atmosphere)[var];
varName = atmosphere[var];
break;
case GridOutputFolderType.POLLUTANTS:
var pollutant = variables[1] as List <PollutantsOutput>;
// Warning
if (var >= pollutant.Count)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Pollutants variable is out of range, check description of the input.");
return;
}
selectedVariable = (int)(pollutant)[var];
varName = pollutant[var];
break;
case GridOutputFolderType.RADIATION:
var radiation = variables[2] as List <RadiationOutput>;
// Warning
if (var >= radiation.Count)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Radiation variable is out of range, check description of the input.");
return;
}
selectedVariable = (int)(radiation)[var];
varName = radiation[var];
break;
case GridOutputFolderType.SOIL:
var soil = variables[3] as List <SoilOutput>;
// Warning
if (var >= soil.Count)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Soil variable is out of range, check description of the input.");
return;
}
selectedVariable = (int)(soil)[var];
varName = soil[var];
break;
case GridOutputFolderType.SURFACE:
var surface = variables[4] as List <SurfaceOutput>;
// Warning
if (var >= surface.Count)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Soil variable is out of range, check description of the input.");
return;
}
FlatResults();
loc = 0;
selectedVariable = (int)(surface)[var];
varName = surface[var];
break;
case GridOutputFolderType.SOLAR_ACCESS:
var solar = variables[5] as List <SolarAccessOutput>;
// Warning
if (var >= solar.Count)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Solar access variable is out of range, check description of the input.");
return;
}
FlatResults();
selectedVariable = (int)(solar)[var];
varName = solar[var];
break;
case GridOutputFolderType.VEGETATIONS:
var vegetation = variables[6] as List <VegetationOutput>;
// Warning
if (var >= vegetation.Count)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Vegetation variable is out of range, check description of the input.");
return;
}
selectedVariable = (int)(vegetation)[var];
varName = vegetation[var];
break;
}
DataTree <string> fileNameTree = new DataTree <string>();
DataTree <object> variableTree = new DataTree <object>();
DataTree <double> dataTree = new DataTree <double>();
for (int i = 0; i < gridFiles.Count; i++)
{
GHD.GH_Path pth = new GHD.GH_Path(i);
try
{
string edxName = Path.GetFileNameWithoutExtension(gridFiles[i]);
string edtName = Path.GetFileNameWithoutExtension(gridBinaryFiles[i]);
if (edxName == edtName)
{
List <double> results = GridOutput.ParseBinGrid(gridFiles[i], gridBinaryFiles[i], selectedVariable, loc, Direction);
if (results == null)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Location of plane is out of range.");
return;
}
report = GridOutput.GetReport(gridFiles[i]);
DA.SetData(0, report);
Vector3d vector = GridOutput.GetVectorPlaneFromEdx(gridFiles[i], Direction, loc);
DA.SetData(1, vector);
fileNameTree.Add(Path.GetFileName(gridFiles[i]), pth);
variableTree.Add(varName, pth);
dataTree.AddRange(results, pth);
}
else
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Please, check output folder you are reading. EDT file name and EDX file name should be the same.");
}
}
catch
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Something is wrong in output dynamic folder.\nPlease, make sure EDT length is equals to EDX length.");
continue;
}
}
DA.SetDataTree(2, fileNameTree);
DA.SetDataTree(3, variableTree);
DA.SetDataTree(4, dataTree);
}
}
/// <summary>
/// This is the method that actually does the work.
/// </summary>
/// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param>
protected override void SolveInstance(IGH_DataAccess DA)
{
List <string> _receptorPath = new List <string>();
int _receptorHeightIndex_ = 0;
int _val_ = 0;
bool runIt_ = false;
DA.GetDataList(0, _receptorPath);
DA.GetData(1, ref _receptorHeightIndex_);
DA.GetData(2, ref _val_);
DA.GetData(3, ref runIt_);
// Unwrap variables
var variables = ReceptorOutputTypeMapping(_value);
if (_value == ReceptorFileType.SOIL)
{
Params.Input[1].Name = "_receptorHeightIndex_";
Params.Input[1].NickName = "_receptorHeightIndex_";
Params.Input[1].Description = "Use this index to a get value at different height. Value depends on your model.";
Params.Input[2].Name = "_soilVariable_";
Params.Input[2].NickName = "_soilVariable_";
Params.Input[2].Description = "Connect a number:\n0 = Temperature °C\n1= VolumeWaterContent m3/m-3\n2 = TemperatureDiffusifity *10e6";
Params.Output[0].Description = "Negative height (cm).";
}
else if (_value == ReceptorFileType.FLUX)
{
Params.Input[1].Name = "-";
Params.Input[1].NickName = "-";
Params.Input[1].Description = "-";
_receptorHeightIndex_ = 0;
Params.Output[0].Description = "Height of measure (m).";
Params.Input[2].Name = "_fluxVariable_";
Params.Input[2].NickName = "_fluxVariable_";
Params.Input[2].Description = "Connect a number:\n0 = SurfaceTemperature °C\n" +
"1 = ChangeSurfaceTemperature °C/h\n" +
"2 = SurfaceHumidity g/kg\n" +
"3 = HorizontalWindSpeedaboveSurface m/s\n" +
"4 = VerticalComponentWindSpeedaboveSurfaceZ m/s\n" +
"5 = AirTemperatureofGridPoint °C\n" +
"6 = SensibleHeatFlux W/m²\n" +
"7 = LatentHeatFlux W/m²\n" +
"8 = SoilHeatFlux W/m²\n" +
"9 = MasSExchangeCoefficient m²/s\n" +
"10 = TurbulentExchangeCoefficient m²/s\n" +
"11 = MaxDirectShortwaverRadiation W/m²\n" +
"12 = MaxDiffuseShortwaveRadiation W/m²\n" +
"13 = MaxReflectedShortwaveRadiation W/m²\n" +
"14 = LongwaveRadiationBudgetSrf W/m²";
}
else
{
Params.Input[1].Name = "_receptorHeightIndex_";
Params.Input[1].NickName = "_receptorHeightIndex_";
Params.Input[1].Description = "Use this index to a get value at different height. Value depends on your model..";
Params.Input[2].Name = "_atmosphereVariable_";
Params.Input[2].NickName = "_atmosphereVariable_";
Params.Output[0].Description = "Height of measure (m).";
Params.Input[2].Description = "Connect a number:\n0 = WindSpeed m/s\n" +
"1 = WindDirection °\n" +
"2 = AirTemperature °C\n" +
"3 = DiffTemperature °C/h\n" +
"4 = SpecificHumidity g/kg\n" +
"5 = RelativeHumidity %\n" +
"6 = VerticalExchangeCoefficient m²/s\n" +
"7 = VerticalKmNormed -\n" +
"8 = HorizontalExchangeCoefficient m²/s\n" +
"9 = TurbulentKineticEnergy m²/s²\n" +
"10 = DissipationTKE m³/s²\n" +
"11 = MeanRadiantTemperature °C\n" +
"12 = LeafAreaDensity m²/m³\n" +
"13 = LeafFoliageTemperature °C\n" +
"14 = SensibleHeatFluxFromLeaf W/m²2\n" +
"15 = LatentHeatFluxFromLeaf W/m²2\n" +
"16 = StomataResistance m/s\n" +
"17 = CO2 mg/m³\n" +
"18 = CO2Flux mg/(kg*s)\n" +
"19 = ShortwaveDirectRadiation W/m²\n" +
"20 = ShortwaveDiffuseRadiation W/m²\n" +
"21 = PressurePerturbation Pa\n" +
"22 = MassConcentration mg/m³\n" +
"23 = MechanicalProductionTKE -\n" +
"24 = AirTemperatureChangeLongwave K/h\n" +
"25 = SkyViewFactorBuilding\n -" +
"26 = SkyViewFactorBuildingLeaf -";
}
if (runIt_)
{
DataTree <string> valueTree = new DataTree <string>();
DataTree <string> dateTree = new DataTree <string>();
DataTree <string> timeTree = new DataTree <string>();
// Warning!
if (_val_ >= variables.Count)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Variable is out of range, check description of the input.");
return;
}
double receptorHeight = 0;
for (int i = 0; i < _receptorPath.Count; i++)
{
IEnumerable <string> files = ReceptorOutput.GetAllReceptorFiles(_receptorPath[i], _value);
List <string> selectedValues = new List <string>();
GHD.GH_Path pth = new GHD.GH_Path(i);
if (_value != ReceptorFileType.FLUX)
{
foreach (string f in files)
{
// Warning
if (_receptorHeightIndex_ >= ReceptorOutput.GetValueFromCsv(f, (int)ReceptorAtmosphereVariable.Z).Count)
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Z Index does not exist.");
return;
}
string val = ReceptorOutput.GetValueFromCsv(f, variables[_val_])[_receptorHeightIndex_];
if (val == SOIL_NULL)
{
val = ZERO;
}
selectedValues.Add(val);
dateTree.Add(ReceptorOutput.GetValueFromCsv(f, (int)ReceptorAtmosphereVariable.Date)[_receptorHeightIndex_], pth);
timeTree.Add(ReceptorOutput.GetValueFromCsv(f, (int)ReceptorAtmosphereVariable.Time)[_receptorHeightIndex_], pth);
receptorHeight = Convert.ToDouble(ReceptorOutput.GetValueFromCsv(f, (int)ReceptorAtmosphereVariable.Z)[_receptorHeightIndex_]);
}
valueTree.AddRange(selectedValues, pth);
}
else
{
foreach (string f in files)
{
valueTree.AddRange(ReceptorOutput.GetValueFromCsv(f, variables[_val_]), pth);
dateTree.AddRange(ReceptorOutput.GetValueFromCsv(f, (int)ReceptorAtmosphereVariable.Date), pth);
timeTree.AddRange(ReceptorOutput.GetValueFromCsv(f, (int)ReceptorAtmosphereVariable.Time), pth);
}
}
}
DA.SetData(0, receptorHeight);
DA.SetDataTree(1, dateTree);
DA.SetDataTree(2, timeTree);
DA.SetDataTree(3, valueTree);
}
}
//Main Methods
public DataTree <Polyline> Beams2(NGonsCore.MeshProps p)
{
DataTree <Polyline> dt = new DataTree <Polyline>();
try
{
//Edge and End Planes
Dictionary <int, int> E = p.M._EAll();//mesh edge - ngon edge
for (int i = 0; i < p.M._countF(); i++)
{
int[] fe = p.M._fe(i);
for (int j = 0; j < p.M._countE(i); j++)
{
if (this[i, j].isNexor != 0)
{
int e = E[fe[j]];//get ngon Edge by local meshedge
this[i, j].ePl90 = p.ePl90[e].ChangeOrigin(this[i, j].line.Center());
this[i, j].ePl = p.ePl[e].ChangeOrigin(this[i, j].line.Center());
this[i, j].ePl90Offset = this[i, j].ePl90.MovePlanebyAxis(depth);
int[] o = p.M._OppositeFE(i, j);
int i_ = (o[0] != -1) ? o[0] : i;
int j_ = (o[1] != -1) ? o[1] : j;
int naked = (o[0] != -1) ? 1 : -1;
Plane ePl0 = this[i, j].ePl;
Plane ePl1 = new Plane(this[i, j].ePl.Origin, this[i, j].ePl.YAxis, this[i, j].ePl.ZAxis);
Plane cPl = p.fPl[i];
Plane oPl = p.fPl[i_];
Point3d originC = PlaneUtil.PlanePlanePlane(ePl0, ePl1, cPl);
Point3d originO = PlaneUtil.PlanePlanePlane(ePl0, ePl1, oPl);
//Plane correspoding to current face plane
Plane fcPl = p.fePl[i][j].ChangeOrigin(originC);
Plane fcPl90 = p.fePl90[i][j].ChangeOrigin(originC);
Vector3d v0 = -fcPl.ZAxis * offset0 * scale;
Vector3d v1 = -fcPl.YAxis * plateThickness;
Plane fcPl0 = fcPl90;
//this[i, j].fcPl.Add(fcPl90);
this[i, j].fcPl.Add(fcPl.Translation(v0 * extend));
this[i, j].fcPl.Add(fcPl90.Translation(v0 + v1));
this[i, j].fcPl.Add(this[i, j].ePl.Translation(v0 * 2));
if (i == 10)
{
//Line line = new Line(originO.zy);
//this[i, j].fcPl.Bake();
}
//Plane corresponding to opposite plane
Plane foPl = p.fePl[i_][j_].ChangeOrigin(originO);
Plane foPl90 = p.fePl90[i_][j_].ChangeOrigin(originO);
v0 = -foPl.ZAxis * offset0 * scale * naked;//for naked opposite - do i need to flip?
v1 = -foPl.YAxis * plateThickness;
this[i, j].foPl.Add(this[i, j].ePl.Translation(v0 * 2));
this[i, j].foPl.Add(foPl90.Translation(v0 + v1));
this[i, j].foPl.Add(foPl.Translation(v0 * extend));
//this[i, j].foPl.Add(foPl90);
Plane foPl3 = foPl90;
//Average plane for chamfer middle part of the beam
Line l1 = PlaneUtil.PlanePlane(fcPl90, this[i, j].fcPl[0]);
Line l0 = PlaneUtil.PlanePlane(this[i, j].foPl[2], foPl90);
this[i, j].fcPl_foPl = new Plane((l0.Center() + l1.Center()) * 0.5, l0.Direction, l0.Center() - l1.Center());
//End Planes - next edge opposite
int ne = E[fe.Next(j)]; //get next ngon edge
int[] no = p.M._OppositeFE(i, (j + 1).Wrap(p.M._countE(i))); //get next opposite edge
this[i, j].endPl0 = (no[0] != -1) ? this[i, j].endPl0 = p.ePl[ne].ChangeOrigin(this[no[0], no[1]].line.Center()) : this[i, j].endPl0 = p.ePl[ne].ChangeOrigin(this[i, j].line.To); //change origin because planes are located at mesh edge
this[i, j].endPl0 = this[i, j].endPl0.MovePlanebyAxis(offset0 * 2, this[i, j].line.Center()); //move towards the center
//End Planes - prev edge opposite
int pe = E[fe.Prev(j)]; //get previous ngon edge
int[] po = p.M._OppositeFE(i, (j - 1).Wrap(p.M._countE(i))); ////get prev opposite edge
this[i, j].endPl1 = (po[0] != -1) ? p.ePl[pe].ChangeOrigin(this[po[0], po[1]].line.Center()) : p.ePl[pe].ChangeOrigin(this[i, j].line.From); //change origin because planes are located at mesh edge
this[i, j].endPl1 = this[i, j].endPl1.MovePlanebyAxis(offset0 * 2, this[i, j].line.Center()); //move towards the center
}//is nexor
}//for j
}//for i
//Nodes profiles
for (int i = 0; i < p.M._countF(); i++)
{
int[] fe = p.M._fe(i);
for (int j = 0; j < p.M._countE(i); j++)
{
if (this[i, j].isNexor != 0)
{
List <Polyline> cutters0 = new List <Polyline>();
List <Plane> sidePlanes = new List <Plane>();
sidePlanes.AddRange(this[i, j].fcPl);
sidePlanes.Add(this[i, j].ePl90Offset);
sidePlanes.AddRange(this[i, j].foPl);
sidePlanes.Add(this[i, j].fcPl_foPl);
if ((!p.M.IsNaked(fe[j])))//
{
//End Planes - next edge opposite
int[] op = p.M._OppositeFE(i, j, -1);
int[] on = p.M._OppositeFE(i, j, 1);
int[] no = p.M._OppositeFE(i, (j + 1).Wrap(fe.Length)); //for end parts
int[] po = p.M._OppositeFE(i, (j - 1).Wrap(fe.Length)); //for end parts
//First profile
Polyline p0 = PolylineUtil.PolylineFromPlanes(this[i, j].endPl0, sidePlanes);
//Plane sectionPlaneP0 = p.M.IsNaked(fe.Next(j)) ? this[i, (j + 1).Wrap(fe.Length)].ePl : this[op[0], op[1]].fcPl[0];
if (op[0] != -1)
{
p0 = PolylineUtil.PolylineFromPlanes(this[op[0], op[1]].fcPl[0], sidePlanes);
}
List <Plane> sidePlanes1A = new List <Plane>();
sidePlanes1A.AddRange(this[i, j].fcPl);
sidePlanes1A.Add(this[i, j].ePl90Offset);
sidePlanes1A.Add(this[i, j].foPl[0]);
sidePlanes1A.Add(this[i, j].foPl[1].MovePlanebyAxis(plateThickness));
sidePlanes1A.Add(this[i, j].fcPl_foPl);
Plane sectionPlaneP3A_ = p.M.IsNaked(fe.Next(j)) ? this[i, (j + 1).Wrap(fe.Length)].foPl[0] : this[op[0], op[1]].foPl[0];
Plane sectionPlaneP3A = p.M.IsNaked(fe.Next(j)) ? this[i, (j + 1).Wrap(fe.Length)].fcPl[2] : this[op[0], op[1]].foPl[0];
if (p.M.IsNaked(fe.Next(j)) && (p.M.TopologyEdges.EdgeLine(fe.Next(j)).To.Z < z || p.M.TopologyEdges.EdgeLine(fe.Next(j)).From.Z < z))
{
sectionPlaneP3A_ = ground;
this[i, j].endPl0 = ground;
}
List <Plane> sidePlanes1BExtended = new List <Plane>();
sidePlanes1BExtended.Add(this[i, j].fcPl[0]);
sidePlanes1BExtended.Add(this[i, j].ePl90Offset.MovePlanebyAxis(this.depth * 2, this[i, j].line.Center(), 2, true));
sidePlanes1BExtended.Add(this[i, j].foPl[0]);
sidePlanes1BExtended.Add(this[i, j].foPl[1].MovePlanebyAxis(plateThickness));
sidePlanes1BExtended.Add(this[i, j].fcPl_foPl);
Polyline p2A = PolylineUtil.PolylineFromPlanes(this[op[0], op[1]].fcPl[0], sidePlanes1A);
Polyline p3A = PolylineUtil.PolylineFromPlanes(sectionPlaneP3A, sidePlanes1A);//Top Removal - Inner
Polyline p3A_ = PolylineUtil.PolylineFromPlanes(sectionPlaneP3A_, sidePlanes1A);
Polyline p3A_Extended = PolylineUtil.PolylineFromPlanes(sectionPlaneP3A, sidePlanes1BExtended); //1
cutters0.Add(p3A_Extended);
this[i, j].profiles.Add(p2A);
this[i, j].profiles.Add(p3A_);
if (p.M.IsNaked(fe.Next(j)))
{
this[i, j].endPl0 = sectionPlaneP3A_;
}
if (no[0] != -1)//i == 20 && j == 1 &&
{
List <Plane> sidePlanes2 = new List <Plane>();
sidePlanes2.AddRange(this[i, j].fcPl);
sidePlanes2.Add(this[i, j].ePl90Offset);
sidePlanes2.Add(this[i, j].foPl[0]);
sidePlanes2.Add(this[no[0], no[1]].foPl[1].MovePlanebyAxis(plateThickness));
sidePlanes2.Add(this[i, j].fcPl_foPl);
List <Plane> sidePlanes2Extended = new List <Plane>();
sidePlanes2Extended.Add(this[i, j].fcPl[0].MovePlanebyAxis(this.plateThickness, this[i, j].line.Center(), 2, false));
sidePlanes2Extended.Add(this[i, j].ePl90Offset.MovePlanebyAxis(this.depth * 2, this[i, j].line.Center(), 2, true));
sidePlanes2Extended.Add(this[i, j].foPl[0].MovePlanebyAxis(this.plateThickness, this[i, j].line.Center(), 2, false));
sidePlanes2Extended.Add(this[no[0], no[1]].foPl[1].MovePlanebyAxis(plateThickness));
sidePlanes2Extended.Add(this[i, j].fcPl_foPl);
Polyline p4A = PolylineUtil.PolylineFromPlanes(this[i, j].endPl0, sidePlanes2); //Top Removal - End
Polyline p4A_Extended = PolylineUtil.PolylineFromPlanes(this[i, j].endPl0.MovePlanebyAxis(0.00, this[i, j].line.Center(), 2, false), sidePlanes2Extended); //Top Removal - End - 0
cutters0.Insert(0, p4A_Extended);
this[i, j].profiles.Add(p3A);
this[i, j].profiles.Add(p4A);
}
//Second profile
Polyline p1 = PolylineUtil.PolylineFromPlanes(this[i, j].endPl1, sidePlanes);
//Plane sectionPlaneP1 = p.M.IsNaked(fe.Prev(j)) ? this[i, (j - 1).Wrap(fe.Length)].ePl : this[on[0], on[1]].fcPl[0];
if (on[0] != -1)
{
p1 = PolylineUtil.PolylineFromPlanes(this[on[0], on[1]].fcPl[0], sidePlanes);
}
List <Plane> sidePlanes1B = new List <Plane>();
sidePlanes1B.AddRange(this[i, j].fcPl);
sidePlanes1B.Add(this[i, j].ePl90Offset);
sidePlanes1B.Add(this[i, j].foPl[0]);
sidePlanes1B.Add(this[i, j].foPl[1].MovePlanebyAxis(plateThickness));
sidePlanes1B.Add(this[i, j].fcPl_foPl);
Plane sectionPlaneP3B_ = p.M.IsNaked(fe.Prev(j)) ? this[i, (j - 1).Wrap(fe.Length)].foPl[0] : this[on[0], on[1]].foPl[0];
Plane sectionPlaneP3B = p.M.IsNaked(fe.Prev(j)) ? this[i, (j - 1).Wrap(fe.Length)].fcPl[2] : this[on[0], on[1]].foPl[0];
if (p.M.IsNaked(fe.Prev(j)) && (p.M.TopologyEdges.EdgeLine(fe.Prev(j)).To.Z < z || p.M.TopologyEdges.EdgeLine(fe.Prev(j)).From.Z < z))
{
sectionPlaneP3B_ = ground;
this[i, j].endPl1 = ground;
//p.M.TopologyEdges.EdgeLine(fe[j]).Center().Bake();
}
Polyline p2B = PolylineUtil.PolylineFromPlanes(this[on[0], on[1]].fcPl[0], sidePlanes1B);
Polyline p3B = PolylineUtil.PolylineFromPlanes(sectionPlaneP3B, sidePlanes1B);//Top Removal - Inner
Polyline p3B_ = PolylineUtil.PolylineFromPlanes(sectionPlaneP3B_, sidePlanes1B);
Polyline p3B_Extended = PolylineUtil.PolylineFromPlanes(sectionPlaneP3B, sidePlanes1BExtended);//Top Removal - Inner2
cutters0.Add(p3B_Extended);
this[i, j].profiles.Add(p2B);
this[i, j].profiles.Add(p3B_);
if (p.M.IsNaked(fe.Prev(j)))
{
this[i, j].endPl1 = sectionPlaneP3B_;
}
if (po[0] != -1)//i == 20 && j == 1 &&
{
List <Plane> sidePlanes2 = new List <Plane>();
sidePlanes2.AddRange(this[i, j].fcPl);
sidePlanes2.Add(this[i, j].ePl90Offset);
sidePlanes2.Add(this[i, j].foPl[0]);
sidePlanes2.Add(this[po[0], po[1]].foPl[1].MovePlanebyAxis(plateThickness));
sidePlanes2.Add(this[i, j].fcPl_foPl);
List <Plane> sidePlanes2Extended = new List <Plane>();
sidePlanes2Extended.Add(this[i, j].fcPl[0].MovePlanebyAxis(this.plateThickness, this[i, j].line.Center(), 2, false));
sidePlanes2Extended.Add(this[i, j].ePl90Offset.MovePlanebyAxis(this.depth * 2, this[i, j].line.Center(), 2, true));
sidePlanes2Extended.Add(this[i, j].foPl[0].MovePlanebyAxis(this.plateThickness, this[i, j].line.Center(), 2, false));
sidePlanes2Extended.Add(this[po[0], po[1]].foPl[1].MovePlanebyAxis(plateThickness));
sidePlanes2Extended.Add(this[i, j].fcPl_foPl);
Polyline p4B = PolylineUtil.PolylineFromPlanes(this[i, j].endPl1, sidePlanes2); //Top Removal - End
Polyline p4B_Extended = PolylineUtil.PolylineFromPlanes(this[i, j].endPl1.MovePlanebyAxis(0.00, this[i, j].line.Center(), 2, false), sidePlanes2Extended); //Top Removal - End //3
cutters0.Add(p4B_Extended);
//p4B_Extended.Bake();
//p2.Bake();
//p3.Bake();
//p4.Bake();
this[i, j].profiles.Add(p4B);
this[i, j].profiles.Add(p3B);
}
this[i, j].profiles.Add(p0);
this[i, j].profiles.Add(p1);
//End profile
}
else if (this[i, j].isNexor == 1)
{
List <Plane> sidePlanesNaked = new List <Plane>();
sidePlanesNaked.AddRange(this[i, j].fcPl);
sidePlanesNaked.Add(this[i, j].ePl90Offset);
sidePlanesNaked.Add(this[i, j].foPl[0]);
sidePlanesNaked.Add(this[i, j].fcPl_foPl);
Plane planeA = (this[i, j].endPl0.Origin.Z < z) ? ground : this[i, j].endPl0;
Plane planeB = (this[i, j].endPl1.Origin.Z < z) ? ground : this[i, j].endPl1;
if (this[i, j].endPl0.Origin.Z < z)
{
this[i, j].endPl0 = ground;
}
if (this[i, j].endPl1.Origin.Z < z)
{
this[i, j].endPl1 = ground;
}
Polyline p0 = PolylineUtil.PolylineFromPlanes(planeA, sidePlanesNaked);
Polyline p1 = PolylineUtil.PolylineFromPlanes(planeB, sidePlanesNaked);
this[i, j].profiles.Add(p0);
this[i, j].profiles.Add(p1);
}
else if (this[i, j].isNexor == -1)
{
List <Plane> sidePlanesNaked = new List <Plane>();
sidePlanesNaked.Add(this[i, j].ePl90Offset);
sidePlanesNaked.Add(this[i, (j + 1).Wrap(fe.Length)].fcPl[2]);
sidePlanesNaked.Add(this[i, (j + 1).Wrap(fe.Length)].fcPl[1]);
sidePlanesNaked.Add(this[i, (j + 1).Wrap(fe.Length)].fcPl[0]);
sidePlanesNaked.Add(this[i, j].fcPl_foPl);
sidePlanesNaked.AddRange(this[i, (j - 1).Wrap(fe.Length)].fcPl);
this[i, j].endPl0 = this[i, (j + 1).Wrap(fe.Length)].fcPl[0];
this[i, j].endPl1 = this[i, (j - 1).Wrap(fe.Length)].fcPl[0];
Polyline p0 = PolylineUtil.PolylineFromPlanes(this[i, j].fcPl[0], sidePlanesNaked);
Polyline p1 = PolylineUtil.PolylineFromPlanes(this[i, j].foPl[0], sidePlanesNaked);
//p0.Bake();
//p1.Bake();
this[i, j].profiles.Add(p0);
this[i, j].profiles.Add(p1);
//p0.Bake();
//p1.Bake();
}
this[i, j].CNC_Cuts.AddRange(cutters0, new Grasshopper.Kernel.Data.GH_Path(i, j));
}
}
}
foreach (var n in this._nexors)
{
if (n.isNexor != 0)
{
var path = new Grasshopper.Kernel.Data.GH_Path(n.idNested[0], n.idNested[1]);
if (n.profiles.Count > 0)
{
dt.AddRange(n.profiles, path);
}
}
}
} catch (Exception e)
{
Rhino.RhinoApp.WriteLine(e.ToString());
}
return(dt);
}
public DataTree <Polyline> Cuts()
{
DataTree <Polyline> dt = new DataTree <Polyline>();
//Create end cuts
for (int i = 0; i < this._nexors.Count; i++)
{
if (this._nexors[i].isNexor != 0)
{
var path = new Grasshopper.Kernel.Data.GH_Path(this.id_[i].Item1, this.id_[i].Item2);
//1. Get bisector planes
List <Plane> sidePlanes = new List <Plane>()
{
this._nexors[i].fcPl[2],
this._nexors[i].endPl0,
this._nexors[i].foPl[0],
this._nexors[i].endPl1
};
Polyline outline = PolylineUtil.PolylineFromPlanes(this._nexors[i].ePl90Offset, sidePlanes);
Plane[] bisectors = outline.PolylineBisectors();
Plane higherPlane = (this._nexors[i].fcPl[1].Origin.DistanceToSquared(this._nexors[i].ePl90Offset.Origin) > this._nexors[i].foPl[1].Origin.DistanceToSquared(this._nexors[i].ePl90Offset.Origin)) ? this._nexors[i].fcPl[1] : this._nexors[i].foPl[1];
higherPlane = higherPlane.MovePlanebyAxis(this.plateThickness * 3);
Plane lowerPlane = this._nexors[i].ePl90Offset.MovePlanebyAxis(-this.plateThickness * 3);
Polyline outline1 = PolylineUtil.PolylineFromPlanes(higherPlane, sidePlanes);
Plane[] bisectors1 = outline1.PolylineBisectors();
for (int j = 0; j < bisectors.Length; j++)
{
bisectors[j] = new Plane(
(bisectors[j].Origin + bisectors1[j].Origin) * 0.5,
(bisectors[j].XAxis + bisectors1[j].XAxis) * 0.5,
bisectors[j].Origin - bisectors1[j].Origin
);
}
//Create V-Shape cuts
Point3d nexorCenter = this._nexors[i].line.Center();
sidePlanes = new List <Plane>()
{
this._nexors[i].endPl0.MovePlanebyAxis(0.2, nexorCenter),
this._nexors[i].fcPl[2].MovePlanebyAxis(0.1, nexorCenter, 2, false),
bisectors[0],
this._nexors[i].endPl0,
bisectors[1],
this._nexors[i].foPl[0].MovePlanebyAxis(0.1, nexorCenter, 2, false)
,
};
Polyline endCuts0A = PolylineUtil.PolylineFromPlanes(lowerPlane, sidePlanes, true);
Polyline endCuts0B = PolylineUtil.PolylineFromPlanes(higherPlane, sidePlanes, true);
sidePlanes[0] = sidePlanes[0].MovePlanebyAxis(-0.2 * 2, nexorCenter, 2, false);
Polyline endCuts0A_ = PolylineUtil.PolylineFromPlanes(lowerPlane, sidePlanes, true);
Polyline endCuts0B_ = PolylineUtil.PolylineFromPlanes(higherPlane, sidePlanes, true);
//endCuts0A_.Bake();
//endCuts0B_.Bake();
sidePlanes = new List <Plane>()
{
this._nexors[i].endPl1.MovePlanebyAxis(0.2, nexorCenter),
this._nexors[i].foPl[0].MovePlanebyAxis(0.1, nexorCenter, 2, false),
bisectors[2],
this._nexors[i].endPl1,
bisectors[3],
this._nexors[i].fcPl[2].MovePlanebyAxis(0.1, nexorCenter, 2, false)
};
Polyline endCuts1A = PolylineUtil.PolylineFromPlanes(lowerPlane, sidePlanes, true);
Polyline endCuts1B = PolylineUtil.PolylineFromPlanes(higherPlane, sidePlanes, true);
sidePlanes[0] = sidePlanes[0].MovePlanebyAxis(-0.2 * 2, nexorCenter, 2, false);
Polyline endCuts1A_ = PolylineUtil.PolylineFromPlanes(lowerPlane, sidePlanes, true);
Polyline endCuts1B_ = PolylineUtil.PolylineFromPlanes(higherPlane, sidePlanes, true);
//endCuts1A_.Bake();
//endCuts1B_.Bake();
this._nexors[i].CNCendBladeSawCuts0.Add(endCuts0A_);
this._nexors[i].CNCendBladeSawCuts0.Add(endCuts0B_);
this._nexors[i].CNCendBladeSawCuts1.Add(endCuts1A_);
this._nexors[i].CNCendBladeSawCuts1.Add(endCuts1B_);
this._nexors[i].CNCendBladeSawCuts0Negative.Add(endCuts0A);
this._nexors[i].CNCendBladeSawCuts0Negative.Add(endCuts0B);
this._nexors[i].CNCendBladeSawCuts1Negative.Add(endCuts1A);
this._nexors[i].CNCendBladeSawCuts1Negative.Add(endCuts1B);
dt.AddRange(this._nexors[i].CNCendBladeSawCuts0, path);
dt.AddRange(this._nexors[i].CNCendBladeSawCuts1, path);
//if (this._nexors[i].isNexor == -1)
//{
// endCuts0A.Bake();
// endCuts0B.Bake();
// endCuts1A.Bake();
// endCuts1B.Bake();
//}
}
}
//Collect neighbour cuts
for (int i = 0; i < this._nexors.Count; i++)
{
var path = new Grasshopper.Kernel.Data.GH_Path(this.id_[i].Item1, this.id_[i].Item2);
int[] adjE0S = this._nexors[i].adjE0S;
int[] adjE1S = this._nexors[i].adjE1S;
if (this._nexors[i].isNexor == 1)
{
if (adjE0S[0] != -1)
{
dt.AddRange(this[adjE0S[0], adjE0S[1]].CNCendBladeSawCuts0Negative, path);
}
if (adjE1S[0] != -1)
{
dt.AddRange(this[adjE1S[0], adjE1S[1]].CNCendBladeSawCuts1Negative, path);
}
//Bottom cut
Point3d c = this._nexors[i].line.Center();
List <Plane> sidePlanes = new List <Plane>()
{
this._nexors[i].endPl0.MovePlanebyAxis(0.2, c, 2, false), this._nexors[i].fcPl[2].MovePlanebyAxis(0.1, c, 2, false), this._nexors[i].endPl1.MovePlanebyAxis(0.2, c, 2, false), this._nexors[i].foPl[0].MovePlanebyAxis(0.1, c, 2, false)
};
Polyline bottomCut0 = PolylineUtil.PolylineFromPlanes(this._nexors[i].ePl90Offset, sidePlanes);
Polyline bottomCut1 = PolylineUtil.PolylineFromPlanes(this._nexors[i].ePl90Offset.MovePlanebyAxis(0.1, c, 2, false), sidePlanes);
//dt.Add(bottomCut0,path);
//dt.Add(bottomCut1, path);
dt.AddRange(this._nexors[i].CNCtopProfileCuts, path);
//bottomCut0.Bake();
//bottomCut1.Bake();
}
if (this._nexors[i].isNexor == -1)
{
dt.AddRange(this._nexors[i].CNCendBladeSawCuts0Negative, new Grasshopper.Kernel.Data.GH_Path(adjE0S[0], adjE0S[1]));
dt.AddRange(this._nexors[i].CNCendBladeSawCuts1Negative, new Grasshopper.Kernel.Data.GH_Path(adjE1S[0], adjE1S[1]));
//Bottom cut
Point3d c = this._nexors[i].line.Center();
List <Plane> sidePlanes = new List <Plane>()
{
this._nexors[i].endPl0.MovePlanebyAxis(0.2, c, 2, false), this._nexors[i].fcPl[2].MovePlanebyAxis(0.1, c, 2, false), this._nexors[i].endPl1.MovePlanebyAxis(0.2, c, 2, false), this._nexors[i].foPl[0].MovePlanebyAxis(0.1, c, 2, false)
};
Polyline bottomCut0 = PolylineUtil.PolylineFromPlanes(this._nexors[i].ePl90Offset, sidePlanes);
Polyline bottomCut1 = PolylineUtil.PolylineFromPlanes(this._nexors[i].ePl90Offset.MovePlanebyAxis(0.1, c, 2, false), sidePlanes);
//dt.Add(bottomCut0, path);
//dt.Add(bottomCut1, path);
dt.AddRange(this._nexors[i].CNCtopProfileCuts, path);
//instead of path ?????????????????????
//Rhino.RhinoApp.WriteLine(String.Format("adj {0} - {1}, {2}-{3} , {4}-{5}",
// adjE0S[0],
// adjE0S[1],
// adjE1S[0],
// adjE1S[1],
// this._nexors[i].idNested [0],
// this._nexors[i].idNested[1]
// ));
//Rhino.RhinoDoc.ActiveDoc.Objects.AddBrep(this._nexors[i].pipe.breploft);
}
}
for (int i = 0; i < this._nexors.Count; i++)
{
if (this._nexors[i].isNexor != 0)
{
var path = new Grasshopper.Kernel.Data.GH_Path(this.id_[i].Item1, this.id_[i].Item2);
Point3d c = this._nexors[i].pipe.line.Center();
List <Plane> sidePlanes = new List <Plane>()
{
this._nexors[i].fcPl[0].MovePlanebyAxis(0.01, c, 2, false),
this._nexors[i].endPl0.MovePlanebyAxis(0.01, c, 2, false),
this._nexors[i].foPl[2].MovePlanebyAxis(0.01, c, 2, false),
this._nexors[i].endPl1.MovePlanebyAxis(0.01, c, 2, false),
};
Polyline angledCut0 = PolylineUtil.PolylineFromPlanes(this._nexors[i].fcPl_foPl, sidePlanes);
Polyline angledCut1 = PolylineUtil.PolylineFromPlanes(this._nexors[i].fcPl_foPl.MovePlanebyAxis(0.1, c, 2, false), sidePlanes);
//dt.Add(angledCut0, path);
//dt.Add(angledCut1, path);
//bottomCut0.Bake();
//bottomCut1.Bake();
}
}
return(dt);
}