/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="reader">The stream to read.</param>
/// <param name="factory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override Geometry Read(BigEndianBinaryReader reader, GeometryFactory factory)
{
int shapeTypeNum = reader.ReadInt32();
ShapeType shapeType = (ShapeType)Enum.Parse(typeof(ShapeType), shapeTypeNum.ToString());
if (shapeType != ShapeType.Arc)
{
throw new ShapefileException("Attempting to load a non-arc as arc.");
}
//read and for now ignore bounds.
double[] box = new double[4];
for (int i = 0; i < 4; i++)
{
double d = reader.ReadDouble();
box[i] = d;
}
int numParts = reader.ReadInt32();
int numPoints = reader.ReadInt32();
int[] partOffsets = new int[numParts];
for (int i = 0; i < numParts; i++)
{
partOffsets[i] = reader.ReadInt32();
}
LineString[] lines = new LineString[numParts];
int start, finish, length;
for (int part = 0; part < numParts; part++)
{
start = partOffsets[part];
if (part == numParts - 1)
{
finish = numPoints;
}
else
{
finish = partOffsets[part + 1];
}
length = finish - start;
Coordinate[] coords = new Coordinate[length];
for (int i = 0; i < length; i++)
{
Coordinate coord = new Coordinate(reader.ReadDouble(), reader.ReadDouble());
factory.getPrecisionModel().makePrecise(coord);
coords[i] = coord;
}
lines[part] = factory.createLineString(new PackedCoordinateSequence.Float(coords, 2));
}
return(factory.createMultiLineString(lines));
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="file">The stream to read.</param>
/// <param name="geometryFactory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override Geometry Read(BigEndianBinaryReader file, GeometryFactory geometryFactory)
{
int shapeTypeNum = file.ReadInt32();
ShapeType shapeType = (ShapeType)Enum.Parse(typeof(ShapeType), shapeTypeNum.ToString());
if (shapeType != ShapeType.Arc)
{
throw new ShapefileException("Attempting to load a non-arc as arc.");
}
//read and for now ignore bounds.
double[] box = new double[4];
for (int i = 0; i < 4; i++)
{
double d = file.ReadDouble();
box[i] = d;
}
int numParts = file.ReadInt32();
int numPoints = file.ReadInt32();
int[] partOffsets = new int[numParts];
for (int i = 0; i < numParts; i++)
{
partOffsets[i] = file.ReadInt32();
}
LineString[] lines = new LineString[numParts];
int start, finish, length;
for (int part = 0; part < numParts; part++)
{
start = partOffsets[part];
if (part == numParts - 1)
{
finish = numPoints;
}
else
{
finish = partOffsets[part + 1];
}
length = finish - start;
Coordinates points = new Coordinates();
points.Capacity = length;
Coordinate external;
for (int i = 0; i < length; i++)
{
external = new Coordinate(file.ReadDouble(), file.ReadDouble());
points.Add(geometryFactory.PrecisionModel.ToInternal(external));
}
lines[part] = geometryFactory.CreateLineString(points);
}
return(geometryFactory.CreateMultiLineString(lines));
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="reader">The stream to read.</param>
/// <param name="factory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override Geometry Read(BigEndianBinaryReader reader, GeometryFactory factory)
{
if (this.GetShapeType(reader) != ShapeType.Point)
{
throw new ShapefileException("Attempting to load a non-point as point.");
}
Coordinate coord = new Coordinate(reader.ReadDouble(), reader.ReadDouble());
factory.getPrecisionModel().makePrecise(coord);
return factory.createPoint(coord);
}
/// <summary>
/// Initializes a new instance of the <see cref="ShapefileHeader">ShapefileHeader</see> class with values read in from the stream.
/// </summary>
/// <remarks>Reads the header information from the stream.</remarks>
/// <param name="reader">BigEndianBinaryReader stream to the shapefile.</param>
public ShapefileHeader(BigEndianBinaryReader reader)
{
if (reader == null)
{
throw new ArgumentNullException("reader");
}
_fileCode = reader.ReadIntBE();
if (_fileCode != Shapefile.ShapefileId)
{
throw new ShapefileException("The first four bytes of this file indicate this is not a shape file.");
}
// Skip 5 unsed bytes
for (int i = 0; i < 5; i++)
{
reader.ReadIntBE();
}
_fileLength = reader.ReadIntBE();
_version = reader.ReadInt32();
Debug.Assert(_version == 1000, "Shapefile version", String.Format(System.Globalization.CultureInfo.InvariantCulture, "Expecting only one version (1000), but got {0}", _version));
int shapeType = reader.ReadInt32();
if (Enum.IsDefined(typeof(ShapeType), shapeType))
{
_shapeType = (ShapeType)shapeType;
}
else
{
throw new ShapefileException("Invalid shape type");
}
// Read in and store the bounding box
double[] coords = new double[4];
for (int i = 0; i < coords.Length; i++)
{
coords[i] = reader.ReadDouble();
}
_bounds = new Envelope(coords[0], coords[2], coords[1], coords[3]);
// skip z and m bounding boxes.
for (int i = 0; i < 4; i++)
{
reader.ReadDouble();
}
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="reader">The stream to read.</param>
/// <param name="factory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override Geometry Read(BigEndianBinaryReader reader, GeometryFactory factory)
{
if (this.GetShapeType(reader) != ShapeType.Point)
{
throw new ShapefileException("Attempting to load a non-point as point.");
}
Coordinate coord = new Coordinate(reader.ReadDouble(), reader.ReadDouble());
factory.getPrecisionModel().makePrecise(coord);
return(factory.createPoint(coord));
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="file">The stream to read.</param>
/// <param name="geometryFactory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override Geometry Read(BigEndianBinaryReader file, GeometryFactory geometryFactory)
{
int shapeTypeNum = file.ReadInt32();
ShapeType shapeType = (ShapeType)Enum.Parse(typeof(ShapeType), shapeTypeNum.ToString());
if (shapeType != ShapeType.Point)
{
throw new ShapefileException("Attempting to load a point as point.");
}
double x = file.ReadDouble();
double y = file.ReadDouble();
Coordinate external = new Coordinate(x, y);
return(geometryFactory.CreatePoint(geometryFactory.PrecisionModel.ToInternal(external)));
}
/// <summary>
/// Initializes a new instance of the ShapefileHeader class with values read in from the stream.
/// </summary>
/// <remarks>Reads the header information from the stream.</remarks>
/// <param name="shpBinaryReader">BigEndianBinaryReader stream to the shapefile.</param>
public ShapefileHeader(BigEndianBinaryReader shpBinaryReader)
{
if (shpBinaryReader == null)
{
throw new ArgumentNullException("shpBinaryReader");
}
_fileCode = shpBinaryReader.ReadIntBE();
if (_fileCode != Shapefile.ShapefileId)
{
throw new ShapefileException("The first four bytes of this file indicate this is not a shape file.");
}
// skip 5 unsed bytes
shpBinaryReader.ReadIntBE();
shpBinaryReader.ReadIntBE();
shpBinaryReader.ReadIntBE();
shpBinaryReader.ReadIntBE();
shpBinaryReader.ReadIntBE();
_fileLength = shpBinaryReader.ReadIntBE();
_version = shpBinaryReader.ReadInt32();
Debug.Assert(_version == 1000, "Shapefile version", String.Format("Expecting only one version (1000), but got {0}", _version));
int shapeType = shpBinaryReader.ReadInt32();
_shapeType = (ShapeType)Enum.Parse(typeof(ShapeType), shapeType.ToString());
//read in and store the bounding box
double[] coords = new double[4];
for (int i = 0; i < 4; i++)
{
coords[i] = shpBinaryReader.ReadDouble();
}
_bounds = new Envelope(coords[0], coords[2], coords[1], coords[3]);
// skip z and m bounding boxes.
for (int i = 0; i < 4; i++)
{
shpBinaryReader.ReadDouble();
}
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="file">The stream to read.</param>
/// <param name="geometryFactory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override Geometry Read(BigEndianBinaryReader file, GeometryFactory geometryFactory)
{
int shapeTypeNum = file.ReadInt32();
ShapeType shapeType = (ShapeType)Enum.Parse(typeof(ShapeType),shapeTypeNum.ToString());
if (shapeType != ShapeType.Arc)
{
throw new ShapefileException("Attempting to load a non-arc as arc.");
}
//read and for now ignore bounds.
double[] box = new double[4];
for (int i = 0; i < 4; i++)
{
double d= file.ReadDouble();
box[i] =d;
}
int numParts = file.ReadInt32();
int numPoints = file.ReadInt32();
int[] partOffsets = new int[numParts];
for (int i = 0; i < numParts; i++)
{
partOffsets[i] = file.ReadInt32();
}
LineString[] lines = new LineString[numParts];
int start, finish, length;
for (int part = 0; part < numParts; part++)
{
start = partOffsets[part];
if (part == numParts - 1)
{
finish = numPoints;
}
else
{
finish = partOffsets[part + 1];
}
length = finish - start;
Coordinates points = new Coordinates();
points.Capacity=length;
Coordinate external;
for (int i = 0; i < length; i++)
{
external = new Coordinate(file.ReadDouble(),file.ReadDouble());
points.Add( geometryFactory.PrecisionModel.ToInternal(external));
}
lines[part] = geometryFactory.CreateLineString(points);
}
return geometryFactory.CreateMultiLineString(lines);
}
/// <summary>
/// Initializes a new instance of the ShapefileHeader class with values read in from the stream.
/// </summary>
/// <remarks>Reads the header information from the stream.</remarks>
/// <param name="shpBinaryReader">BigEndianBinaryReader stream to the shapefile.</param>
public ShapefileHeader(BigEndianBinaryReader shpBinaryReader)
{
if (shpBinaryReader==null)
{
throw new ArgumentNullException("shpBinaryReader");
}
_fileCode = shpBinaryReader.ReadIntBE();
if (_fileCode!=Shapefile.ShapefileId)
{
throw new ShapefileException("The first four bytes of this file indicate this is not a shape file.");
}
// skip 5 unsed bytes
shpBinaryReader.ReadIntBE();
shpBinaryReader.ReadIntBE();
shpBinaryReader.ReadIntBE();
shpBinaryReader.ReadIntBE();
shpBinaryReader.ReadIntBE();
_fileLength = shpBinaryReader.ReadIntBE();
_version = shpBinaryReader.ReadInt32();
Debug.Assert(_version==1000, "Shapefile version", String.Format("Expecting only one version (1000), but got {0}",_version));
int shapeType = shpBinaryReader.ReadInt32();
_shapeType = (ShapeType)Enum.Parse(typeof(ShapeType),shapeType.ToString());
//read in and store the bounding box
double[] coords = new double[4];
for (int i = 0; i < 4; i++)
{
coords[i]=shpBinaryReader.ReadDouble();
}
_bounds = new Envelope(coords[0], coords[2], coords[1], coords[3]);
// skip z and m bounding boxes.
for (int i=0; i < 4; i++)
{
shpBinaryReader.ReadDouble();
}
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="file">The stream to read.</param>
/// <param name="geometryFactory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override Geometry Read(BigEndianBinaryReader file, GeometryFactory geometryFactory)
{
int shapeTypeNum = file.ReadInt32();
ShapeType shapeType = (ShapeType)Enum.Parse(typeof(ShapeType),shapeTypeNum.ToString());
if (shapeType != ShapeType.Polygon)
{
throw new ShapefileException("Attempting to load a non-polygon as polygon.");
}
//read and for now ignore bounds.
double[] box = new double[4];
for (int i = 0; i < 4; i++)
{
box[i] = file.ReadDouble();
}
int[] partOffsets;
int numParts = file.ReadInt32();
int numPoints = file.ReadInt32();
partOffsets = new int[numParts];
for (int i = 0; i < numParts; i++)
{
partOffsets[i] = file.ReadInt32();
}
ArrayList shells = new ArrayList();
ArrayList holes = new ArrayList();
int start, finish, length;
for (int part = 0; part < numParts; part++)
{
start = partOffsets[part];
if (part == numParts - 1)
{
finish = numPoints;
}
else
{
finish = partOffsets[part + 1];
}
length = finish - start;
Coordinates points = new Coordinates();
points.Capacity=length;
for (int i = 0; i < length; i++)
{
Coordinate external = new Coordinate(file.ReadDouble(), file.ReadDouble() );
Coordinate internalCoord = geometryFactory.PrecisionModel.ToInternal(external);
points.Add(internalCoord);
}
LinearRing ring = geometryFactory.CreateLinearRing(points);
//Debug.Assert(ring.IsValid()==false,"Ring is not valid.");
if (_cga.IsCCW(points))
{
holes.Add(ring);
}
else
{
shells.Add(ring);
}
}
//now we have a list of all shells and all holes
ArrayList holesForShells = new ArrayList(shells.Count);
for (int i = 0; i < shells.Count; i++)
{
holesForShells.Add(new ArrayList());
}
//find homes
for (int i = 0; i < holes.Count; i++)
{
LinearRing testRing = (LinearRing) holes[i];
LinearRing minShell = null;
Envelope minEnv = null;
Envelope testEnv = testRing.GetEnvelopeInternal();
Coordinate testPt = testRing.GetCoordinateN(0);
LinearRing tryRing;
for (int j = 0; j < shells.Count; j++)
{
tryRing = (LinearRing) shells[j];
Envelope tryEnv = tryRing.GetEnvelopeInternal();
if (minShell != null)
{
minEnv = minShell.GetEnvelopeInternal();
}
bool isContained = false;
Coordinates coordList = tryRing.GetCoordinates() ;
if (tryEnv.Contains(testEnv)
&& (_cga.IsPointInRing(testPt,coordList ) ||
(PointInList(testPt,coordList))))
{
isContained = true;
}
// check if this new containing ring is smaller than the
// current minimum ring
if (isContained)
{
if (minShell == null
|| minEnv.Contains(tryEnv))
{
minShell = tryRing;
}
}
}
//if (minShell==null)
//{
// throw new InvalidOperationException("Could not find shell for a hole. Try a different precision model.");
//}
}
Polygon[] polygons = new Polygon[shells.Count];
for (int i = 0; i < shells.Count; i++)
{
polygons[i] = geometryFactory.CreatePolygon((LinearRing) shells[i], (LinearRing[])((ArrayList) holesForShells[i]).ToArray(typeof(LinearRing)));
}
if (polygons.Length == 1)
{
return polygons[0];
}
//it's a multi part
return geometryFactory.CreateMultiPolygon(polygons);
}
private void Initialize()
{
// Cache the .dbf header
_dbfHeader = new DbaseFileHeader();
using (BinaryReader dbfReader = new BinaryReader(File.OpenRead(Path.Combine(Path.GetDirectoryName(_path), Path.GetFileNameWithoutExtension(_path) + ".dbf"))))
{
_dbfHeader.ReadHeader(dbfReader);
_dbfHeaderOffset = dbfReader.BaseStream.Position;
}
// Need to make one pass over the geometries and pull out the bounding boxes
_spatialIndex = new com.vividsolutions.jts.index.strtree.STRtree();
_extents = new Envelope();
using (BigEndianBinaryReader shpReader = new BigEndianBinaryReader(File.OpenRead(_path)))
using (ShapefileIndexReader shxReader = new ShapefileIndexReader(Path.Combine(Path.GetDirectoryName(_path), Path.GetFileNameWithoutExtension(_path) + ".shx")))
{
// Get the shape type
_type = new ShapefileHeader(shpReader).ShapeType;
while (shxReader.Read())
{
int offset = shxReader.GetOffest();
int length = shxReader.GetLength();
// Move to the start of geometry
shpReader.BaseStream.Position = offset * 2;
double xMin;
double yMin;
double xMax;
double yMax;
int recordNumber = shpReader.ReadIntBE();
int contentLength = shpReader.ReadIntBE();
// Read shape type
int type = shpReader.ReadInt32();
if (type != 1)
{
xMin = shpReader.ReadDouble();
yMin = shpReader.ReadDouble();
xMax = shpReader.ReadDouble();
yMax = shpReader.ReadDouble();
}
else
{
// Point - read x and y
xMin = shpReader.ReadDouble();
yMin = shpReader.ReadDouble();
xMax = yMin;
yMax = yMin;
}
// Build the envelope
Envelope extents = new Envelope(xMin, xMax, yMin, yMax);
// Add to total extents
_extents.expandToInclude(extents);
// Insert the index of the record into the spatial index
_spatialIndex.insert(extents, new ShapefileRecordPointer(recordNumber, offset * 2, contentLength, (int)_dbfHeaderOffset + (_dbfHeader.RecordLength * (recordNumber - 1))));
}
// Build the index once
_spatialIndex.build();
}
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="reader">The stream to read.</param>
/// <param name="factory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override Geometry Read(BigEndianBinaryReader reader, GeometryFactory factory)
{
int shapeTypeNum = reader.ReadInt32();
ShapeType shapeType = (ShapeType)Enum.Parse(typeof(ShapeType),shapeTypeNum.ToString());
if (shapeType != ShapeType.Arc)
{
throw new ShapefileException("Attempting to load a non-arc as arc.");
}
//read and for now ignore bounds.
double[] box = new double[4];
for (int i = 0; i < 4; i++)
{
double d= reader.ReadDouble();
box[i] =d;
}
int numParts = reader.ReadInt32();
int numPoints = reader.ReadInt32();
int[] partOffsets = new int[numParts];
for (int i = 0; i < numParts; i++)
{
partOffsets[i] = reader.ReadInt32();
}
LineString[] lines = new LineString[numParts];
int start, finish, length;
for (int part = 0; part < numParts; part++)
{
start = partOffsets[part];
if (part == numParts - 1)
{
finish = numPoints;
}
else
{
finish = partOffsets[part + 1];
}
length = finish - start;
Coordinate[] coords = new Coordinate[length];
for (int i = 0; i < length; i++)
{
Coordinate coord = new Coordinate(reader.ReadDouble(), reader.ReadDouble());
factory.getPrecisionModel().makePrecise(coord);
coords[i] = coord;
}
lines[part] = factory.createLineString(new PackedCoordinateSequence.Float(coords, 2));
}
return factory.createMultiLineString(lines);
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="reader">The stream to read.</param>
/// <param name="factory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override Geometry Read(BigEndianBinaryReader reader, GeometryFactory factory)
{
if (this.GetShapeType(reader) != ShapeType.Polygon)
{
throw new ShapefileException("Attempting to load a non-polygon as polygon.");
}
// Read and for now ignore bounds.
double[] box = new double[4];
for (int i = 0; i < box.Length; i++)
{
box[i] = reader.ReadDouble();
}
int numParts = reader.ReadInt32();
int numPoints = reader.ReadInt32();
int[] partOffsets = new int[numParts];
for (int i = 0; i < numParts; i++)
{
partOffsets[i] = reader.ReadInt32();
}
ArrayList shells = new ArrayList();
ArrayList holes = new ArrayList();
int start, finish, length;
for (int part = 0; part < numParts; part++)
{
start = partOffsets[part];
if (part == numParts - 1)
{
finish = numPoints;
}
else
{
finish = partOffsets[part + 1];
}
length = finish - start;
Coordinate[] coords = new Coordinate[length];
for (int i = 0; i < length; i++)
{
Coordinate coord = new Coordinate(reader.ReadDouble(), reader.ReadDouble());
factory.getPrecisionModel().makePrecise(coord);
coords[i] = coord;
}
LinearRing ring = factory.createLinearRing(new PackedCoordinateSequence.Float(coords, 2));
if (com.vividsolutions.jts.algorithm.RobustCGAlgorithms.isCCW(coords))
{
holes.Add(ring);
}
else
{
shells.Add(ring);
}
}
// Now we have a list of all shells and all holes
ArrayList holesForShells = new ArrayList(shells.Count);
for (int i = 0; i < shells.Count; i++)
{
holesForShells.Add(new ArrayList());
}
//find homes
for (int i = 0; i < holes.Count; i++)
{
LinearRing testRing = (LinearRing) holes[i];
LinearRing minShell = null;
Envelope minEnv = null;
Envelope testEnv = testRing.getEnvelopeInternal();
Coordinate testPt = testRing.getCoordinateN(0);
LinearRing tryRing;
for (int j = 0; j < shells.Count; j++)
{
tryRing = (LinearRing) shells[j];
Envelope tryEnv = tryRing.getEnvelopeInternal();
if (minShell != null)
{
minEnv = minShell.getEnvelopeInternal();
}
bool isContained = false;
Coordinate[] coordList = tryRing.getCoordinates();
if (tryEnv.contains(testEnv)
&& (com.vividsolutions.jts.algorithm.RobustCGAlgorithms.isPointInRing(testPt, coordList ) ||
(PointInList(testPt,coordList))))
{
isContained = true;
}
// check if this new containing ring is smaller than the
// current minimum ring
if (isContained)
{
if (minShell == null
|| minEnv.contains(tryEnv))
{
minShell = tryRing;
}
ArrayList list = (ArrayList)holesForShells[j];
list.Add(testRing);
}
}
if (minShell==null)
{
// throw new InvalidOperationException("Could not find shell for a hole. Try a different precision model.");
}
}
Polygon[] polygons = new Polygon[shells.Count];
for (int i = 0; i < shells.Count; i++)
{
polygons[i] = factory.createPolygon((LinearRing) shells[i], (LinearRing[])((ArrayList) holesForShells[i]).ToArray(typeof(LinearRing)));
}
if (polygons.Length == 1)
{
return polygons[0];
}
//it's a multi part
return factory.createMultiPolygon(polygons);
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="reader">The stream to read.</param>
/// <param name="factory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override Geometry Read(BigEndianBinaryReader reader, GeometryFactory factory)
{
if (this.GetShapeType(reader) != ShapeType.Polygon)
{
throw new ShapefileException("Attempting to load a non-polygon as polygon.");
}
// Read and for now ignore bounds.
double[] box = new double[4];
for (int i = 0; i < box.Length; i++)
{
box[i] = reader.ReadDouble();
}
int numParts = reader.ReadInt32();
int numPoints = reader.ReadInt32();
int[] partOffsets = new int[numParts];
for (int i = 0; i < numParts; i++)
{
partOffsets[i] = reader.ReadInt32();
}
ArrayList shells = new ArrayList();
ArrayList holes = new ArrayList();
int start, finish, length;
for (int part = 0; part < numParts; part++)
{
start = partOffsets[part];
if (part == numParts - 1)
{
finish = numPoints;
}
else
{
finish = partOffsets[part + 1];
}
length = finish - start;
Coordinate[] coords = new Coordinate[length];
for (int i = 0; i < length; i++)
{
Coordinate coord = new Coordinate(reader.ReadDouble(), reader.ReadDouble());
factory.getPrecisionModel().makePrecise(coord);
coords[i] = coord;
}
LinearRing ring = factory.createLinearRing(new PackedCoordinateSequence.Float(coords, 2));
if (com.vividsolutions.jts.algorithm.RobustCGAlgorithms.isCCW(coords))
{
holes.Add(ring);
}
else
{
shells.Add(ring);
}
}
// Now we have a list of all shells and all holes
ArrayList holesForShells = new ArrayList(shells.Count);
for (int i = 0; i < shells.Count; i++)
{
holesForShells.Add(new ArrayList());
}
//find homes
for (int i = 0; i < holes.Count; i++)
{
LinearRing testRing = (LinearRing)holes[i];
LinearRing minShell = null;
Envelope minEnv = null;
Envelope testEnv = testRing.getEnvelopeInternal();
Coordinate testPt = testRing.getCoordinateN(0);
LinearRing tryRing;
for (int j = 0; j < shells.Count; j++)
{
tryRing = (LinearRing)shells[j];
Envelope tryEnv = tryRing.getEnvelopeInternal();
if (minShell != null)
{
minEnv = minShell.getEnvelopeInternal();
}
bool isContained = false;
Coordinate[] coordList = tryRing.getCoordinates();
if (tryEnv.contains(testEnv) &&
(com.vividsolutions.jts.algorithm.RobustCGAlgorithms.isPointInRing(testPt, coordList) ||
(PointInList(testPt, coordList))))
{
isContained = true;
}
// check if this new containing ring is smaller than the
// current minimum ring
if (isContained)
{
if (minShell == null ||
minEnv.contains(tryEnv))
{
minShell = tryRing;
}
ArrayList list = (ArrayList)holesForShells[j];
list.Add(testRing);
}
}
if (minShell == null)
{
// throw new InvalidOperationException("Could not find shell for a hole. Try a different precision model.");
}
}
Polygon[] polygons = new Polygon[shells.Count];
for (int i = 0; i < shells.Count; i++)
{
polygons[i] = factory.createPolygon((LinearRing)shells[i], (LinearRing[])((ArrayList)holesForShells[i]).ToArray(typeof(LinearRing)));
}
if (polygons.Length == 1)
{
return(polygons[0]);
}
//it's a multi part
return(factory.createMultiPolygon(polygons));
}
/// <summary>
/// Initializes a new instance of the <see cref="ShapefileHeader">ShapefileHeader</see> class with values read in from the stream.
/// </summary>
/// <remarks>Reads the header information from the stream.</remarks>
/// <param name="reader">BigEndianBinaryReader stream to the shapefile.</param>
public ShapefileHeader(BigEndianBinaryReader reader)
{
if (reader == null)
{
throw new ArgumentNullException("reader");
}
_fileCode = reader.ReadIntBE();
if (_fileCode!=Shapefile.ShapefileId)
{
throw new ShapefileException("The first four bytes of this file indicate this is not a shape file.");
}
// Skip 5 unsed bytes
for (int i = 0; i < 5; i++)
{
reader.ReadIntBE();
}
_fileLength = reader.ReadIntBE();
_version = reader.ReadInt32();
Debug.Assert(_version == 1000, "Shapefile version", String.Format(System.Globalization.CultureInfo.InvariantCulture, "Expecting only one version (1000), but got {0}", _version));
int shapeType = reader.ReadInt32();
if (Enum.IsDefined(typeof(ShapeType), shapeType))
{
_shapeType = (ShapeType)shapeType;
}
else
{
throw new ShapefileException("Invalid shape type");
}
// Read in and store the bounding box
double[] coords = new double[4];
for (int i = 0; i < coords.Length; i++)
{
coords[i] = reader.ReadDouble();
}
_bounds = new Envelope(coords[0], coords[2], coords[1], coords[3]);
// skip z and m bounding boxes.
for (int i = 0; i < 4; i++)
{
reader.ReadDouble();
}
}
private void Initialize()
{
// Cache the .dbf header
_dbfHeader = new DbaseFileHeader();
using (BinaryReader dbfReader = new BinaryReader(File.OpenRead(Path.Combine(Path.GetDirectoryName(_path), Path.GetFileNameWithoutExtension(_path) + ".dbf"))))
{
_dbfHeader.ReadHeader(dbfReader);
_dbfHeaderOffset = dbfReader.BaseStream.Position;
}
// Need to make one pass over the geometries and pull out the bounding boxes
_spatialIndex = new com.vividsolutions.jts.index.strtree.STRtree();
_extents = new Envelope();
using (BigEndianBinaryReader shpReader = new BigEndianBinaryReader(File.OpenRead(_path)))
using (ShapefileIndexReader shxReader = new ShapefileIndexReader(Path.Combine(Path.GetDirectoryName(_path), Path.GetFileNameWithoutExtension(_path) + ".shx")))
{
// Get the shape type
_type = new ShapefileHeader(shpReader).ShapeType;
while (shxReader.Read())
{
int offset = shxReader.GetOffest();
int length = shxReader.GetLength();
// Move to the start of geometry
shpReader.BaseStream.Position = offset * 2;
double xMin;
double yMin;
double xMax;
double yMax;
int recordNumber = shpReader.ReadIntBE();
int contentLength = shpReader.ReadIntBE();
// Read shape type
int type = shpReader.ReadInt32();
if (type != 1)
{
xMin = shpReader.ReadDouble();
yMin = shpReader.ReadDouble();
xMax = shpReader.ReadDouble();
yMax = shpReader.ReadDouble();
}
else
{
// Point - read x and y
xMin = shpReader.ReadDouble();
yMin = shpReader.ReadDouble();
xMax = yMin;
yMax = yMin;
}
// Build the envelope
Envelope extents = new Envelope(xMin, xMax, yMin, yMax);
// Add to total extents
_extents.expandToInclude(extents);
// Insert the index of the record into the spatial index
_spatialIndex.insert(extents, new ShapefileRecordPointer(recordNumber, offset * 2, contentLength, (int)_dbfHeaderOffset + (_dbfHeader.RecordLength * (recordNumber - 1))));
}
// Build the index once
_spatialIndex.build();
}
}
/// <summary>
/// Reads a stream and converts the shapefile record to an equilivent geometry object.
/// </summary>
/// <param name="file">The stream to read.</param>
/// <param name="geometryFactory">The geometry factory to use when making the object.</param>
/// <returns>The Geometry object that represents the shape file record.</returns>
public override Geometry Read(BigEndianBinaryReader file, GeometryFactory geometryFactory)
{
int shapeTypeNum = file.ReadInt32();
ShapeType shapeType = (ShapeType)Enum.Parse(typeof(ShapeType), shapeTypeNum.ToString());
if (shapeType != ShapeType.Polygon)
{
throw new ShapefileException("Attempting to load a non-polygon as polygon.");
}
//read and for now ignore bounds.
double[] box = new double[4];
for (int i = 0; i < 4; i++)
{
box[i] = file.ReadDouble();
}
int[] partOffsets;
int numParts = file.ReadInt32();
int numPoints = file.ReadInt32();
partOffsets = new int[numParts];
for (int i = 0; i < numParts; i++)
{
partOffsets[i] = file.ReadInt32();
}
ArrayList shells = new ArrayList();
ArrayList holes = new ArrayList();
int start, finish, length;
for (int part = 0; part < numParts; part++)
{
start = partOffsets[part];
if (part == numParts - 1)
{
finish = numPoints;
}
else
{
finish = partOffsets[part + 1];
}
length = finish - start;
Coordinates points = new Coordinates();
points.Capacity = length;
for (int i = 0; i < length; i++)
{
Coordinate external = new Coordinate(file.ReadDouble(), file.ReadDouble());
Coordinate internalCoord = geometryFactory.PrecisionModel.ToInternal(external);
points.Add(internalCoord);
}
LinearRing ring = geometryFactory.CreateLinearRing(points);
//Debug.Assert(ring.IsValid()==false,"Ring is not valid.");
if (_cga.IsCCW(points))
{
holes.Add(ring);
}
else
{
shells.Add(ring);
}
}
//now we have a list of all shells and all holes
ArrayList holesForShells = new ArrayList(shells.Count);
for (int i = 0; i < shells.Count; i++)
{
holesForShells.Add(new ArrayList());
}
//find homes
for (int i = 0; i < holes.Count; i++)
{
LinearRing testRing = (LinearRing)holes[i];
LinearRing minShell = null;
Envelope minEnv = null;
Envelope testEnv = testRing.GetEnvelopeInternal();
Coordinate testPt = testRing.GetCoordinateN(0);
LinearRing tryRing;
for (int j = 0; j < shells.Count; j++)
{
tryRing = (LinearRing)shells[j];
Envelope tryEnv = tryRing.GetEnvelopeInternal();
if (minShell != null)
{
minEnv = minShell.GetEnvelopeInternal();
}
bool isContained = false;
Coordinates coordList = tryRing.GetCoordinates();
if (tryEnv.Contains(testEnv) &&
(_cga.IsPointInRing(testPt, coordList) ||
(PointInList(testPt, coordList))))
{
isContained = true;
}
// check if this new containing ring is smaller than the
// current minimum ring
if (isContained)
{
if (minShell == null ||
minEnv.Contains(tryEnv))
{
minShell = tryRing;
}
}
}
//if (minShell==null)
//{
// throw new InvalidOperationException("Could not find shell for a hole. Try a different precision model.");
//}
}
Polygon[] polygons = new Polygon[shells.Count];
for (int i = 0; i < shells.Count; i++)
{
polygons[i] = geometryFactory.CreatePolygon((LinearRing)shells[i], (LinearRing[])((ArrayList)holesForShells[i]).ToArray(typeof(LinearRing)));
}
if (polygons.Length == 1)
{
return(polygons[0]);
}
//it's a multi part
return(geometryFactory.CreateMultiPolygon(polygons));
}